What is the chemical equation that shows the changes occurring in the ocean?.

The lattice enthalpy of dissociation of a compound is the energy required to completely separate one mole of the solid into its constituent ions in the gas phase. It can be calculated using the Born-Haber cycle, which relates the lattice enthalpy to other thermodynamic quantities such as enthalpies of formation, ionization energies, and electron affinities.

In this case, we can use the following Born-Haber cycle for the dissociation of silver fluoride:

AgF(s) → Ag+(g) + F^-(g)

ΔH°f(AgF) + ΔH°sub(Ag) + IE(Ag) + EA(F) + ΔH°hyd(Ag+) + ΔH°hyd(F^-) - ΔH°lat = 0

where ΔH°f(AgF) is the enthalpy of formation of silver fluoride, ΔH°sub(Ag) is the sublimation enthalpy of silver, IE(Ag) is the first ionization energy of silver, EA(F) is the electron affinity of fluorine, ΔH°hyd(Ag+) is the enthalpy of hydration of silver ions, ΔH°hyd(F^-) is the enthalpy of hydration of fluoride ions, and ΔH°lat is the lattice enthalpy of dissociation of silver fluoride.

We are given ΔH°f(AgF) = -318 kJ/mol, ΔH°sub(Ag) = 286 kJ/mol, IE(Ag) = 731 kJ/mol, EA(F) = -328 kJ/mol, and ΔH°hyd(Ag+) = -464 kJ/mol. We need to calculate ΔH°lat.

First, we can use the enthalpy of solution for silver fluoride in water to calculate the enthalpy of dissolution:

ΔH°diss = -ΔH°sol = 20 kJ/mol

Next, we can use the Born-Lande equation to relate the enthalpy of dissociation to the enthalpy of dissolution:

ΔH°lat = ΔH°diss + ΔH°vib + ΔH°rot + ΔH°trans

where ΔH°vib, ΔH°rot, and ΔH°trans are the vibrational, rotational, and translational contributions to the enthalpy of the solid, respectively. For an ionic solid like silver fluoride, these contributions are relatively small and can be neglected.

Therefore, we can estimate the lattice enthalpy of dissociation as:

ΔH°lat ≈ ΔH°diss = 20 kJ/mol

Note that this is only an estimate, and the actual value may be slightly different due to the neglected contributions and other factors.

To learn more about, lattice enthalpy, click here, https://brainly.com/question/29570387

#SPJ11

The degree of polarization of an anion depends on its size, shape, and electronic structure.

Polarizability refers to the ability of an ion or molecule to undergo deformation in response to an external electric field. The degree of polarization of an anion depends on several factors, including its size, shape, and electronic structure. Larger anions are more polarizable than smaller ones because their outer electrons are more loosely held and more easily displaced by an external electric field. Similarly, anions that have a more diffuse electronic distribution are more polarizable than those with a more compact distribution. This is because the electrons in a diffuse distribution are more easily displaced by an external field. Anion shape can also affect polarizability, with more elongated or asymmetric shapes generally being more polarizable than symmetrical ones. Understanding the factors that affect anion polarizability is important in fields such as chemistry, materials science, and condensed matter physics.

Learn more about polarization  here:

https://brainly.com/question/30002497

#SPJ11

One piece of information that 9" gives about an atom of fluorine is that it has 9 protons in its nucleus, determining its atomic number.

An atom of fluorine is represented by the symbol F and has an atomic number of 9, which indicates the number of protons in its nucleus. This is the most crucial information that "9" provides. In a neutral atom, there are also 9 electrons surrounding the nucleus in specific energy levels or electron shells.

These electrons determine the chemical properties and reactivity of the element. Fluorine has 2 electrons in its first shell and 7 electrons in its second shell. The outermost shell, with 7 electrons, has one unpaired electron, making fluorine highly reactive and enabling it to form one covalent bond with other elements.

Learn more about electrons here:

https://brainly.com/question/29450589

#SPJ11

When using a sling psychrometer to establish which place has lower relative humidity, compare the wet-bulb and dry-bulb temperatures at each site and calculate the relative humidity for each.

The sling psychrometer calculates relative humidity by comparing the dry-bulb temperature (recorded with a conventional thermometer) to the wet-bulb temperature (measured with a thermometer with a wet wick). The difference between the two temperatures shows the amount of moisture in the air. The lower the relative humidity, the larger the disparity.

You may tell whether site has a lower relative humidity by comparing the wet-bulb and dry-bulb temperatures and calculating the relative humidity using the sling psychrometer.

learn more about Relative humidity here:

https://brainly.com/question/10849972

#SPJ4

The pH of the resulting solution is 12.63, if 31.0 ml of 0.310 m HCl(aq) is added to 41.0 ml of 0.310 m NaOH (aq) solution.

To solve this problem, we need to first calculate the moles of acid and base in the solution and then use them to determine the concentration of the resulting solution.

Moles of HCl = 0.310 M x 0.0310 L = 0.00961 mol

Moles of NaOH = 0.310 M x 0.0410 L = 0.0127 mol

Since HCl and NaOH react in a 1:1 ratio, the limiting reagent is HCl. Therefore, all of the HCl will react with NaOH, leaving an excess of NaOH in the solution.

After the reaction, the moles of excess NaOH remaining in the solution is;

Moles of excess NaOH = 0.0127 mol - 0.00961 mol

= 0.00309 mol

The total volume of resulting solution is;

Total volume = 0.0310 L + 0.0410 L = 0.0720 L

The concentration of the excess NaOH is;

Concentration of excess NaOH = 0.00309 mol / 0.0720 L

= 0.0429 M

To find the pH of the resulting solution, we need to calculate the concentration of OH⁻ ions from the excess NaOH;

[OH⁻] = 0.0429 M

pOH = -log[OH⁻] = -log(0.0429) = 1.37

pH = 14.00 - pOH = 14.00 - 1.37 = 12.63

Therefore, the pH of the resulting solution will be 12.63.

To know more about resulting solution here

https://brainly.com/question/27890353

#SPJ4

The molarity of the ammonia solution in this problem is 2.42 M. This titration problem requires the use of stoichiometry to determine the molarity of the ammonia solution.

The balanced chemical equation is used to determine the mole ratio between ammonia and nitric acid, which is 1:1. Knowing the volume and molarity of the nitric acid used, the moles of nitric acid can be calculated. Since the mole ratio between the two reactants is 1:1, the moles of ammonia in the 12.00 ml sample is equal to the moles of nitric acid used in the titration. Finally, the molarity of the ammonia solution is calculated by dividing the moles of ammonia by the volume of the ammonia solution used. The molarity of the ammonia solution in this problem is 2.42 M.

To find the molarity of the ammonia solution, we need to use the balanced chemical equation of the reaction between ammonia and nitric acid:

NH₃ + HNO₃ → NH₄NO₃

From the equation, we can see that the mole ratio between ammonia and nitric acid is 1:1. This means that the moles of ammonia in the 12.00 ml sample is the same as the moles of nitric acid used in the titration, which is:

moles of HNO₃ = (1.499 mol/L) x (19.48 mL/1000 mL) = 0.02899 mol

Therefore, the molarity of the ammonia solution is:

Molarity of NH₃ = moles of NH₃ / volume of NH₃ solution
Molarity of NH₃ = 0.02899 mol / 12.00 mL = 2.42 M

Learn more about titration here:

https://brainly.com/question/30140546

#SPJ11

The beaker with the greatest temperature change will have the largest difference between its initial and final temperatures.

To determine which beaker has the greatest temperature change, you need to follow these steps:

1. Record the initial temperature of each beaker using the thermometer.
2. After every minute for five minutes, record the temperature of each beaker using the thermometer.
3. Create a table with the temperature(Heat) readings of each beaker at each time interval.
4. Calculate the temperature change in each beaker by subtracting the initial temperature from the final temperature after five minutes.
5. Compare the temperature changes of all four beakers.

To know more about temperature Visit:

https://brainly.com/question/11464844

#SPJ11

Carbon monoxide is generated in a gun barrel or in a backdraft ignite, as there is less air. so combustion of carbon present there in limited amount of air produces carbon monoxide.

The gas carbon monoxide, which has the chemical formula CO, is toxic, combustible, tasteless, colourless, and somewhat less dense than air. One carbon atom and one oxygen atom bound together by three bonds make up carbon monoxide. The simplest carbon oxide is this one. The carbon monoxide ligand in coordination complexes is referred to as carbonyl. It is a crucial component in several industrial chemical processes.

When there is not enough oxygen or heat to make carbon dioxide during the partial combustion of carbon-containing substances, carbon monoxide is most frequently produced. There are a lot of biological and environmental factors that produce a lot of carbon monoxide as well. It is crucial for the creation of several chemicals, including as medicines, perfumes, and fuels. Carbon monoxide has an impact on a number of climate change-related processes after entering the atmosphere.

Learn more about Carbon monoxide:

https://brainly.com/question/29233528

#SPJ4

Complete question:

Carbon monoxide is the flammable gas that is partially responsible for the muzzle flash seen from a firearm. It is also one of the gases that can cause a backdraft to happen when firefighters open up poorly ventilated rooms. Automobiles produce carbon monoxide as a result of the negative oxygen balance of the fuel-air explosion that powers the engines. Why does the carbon monoxide generated in a gun barrel or in a backdraft ignite, whereas there is no such igniting in the muffler of a car? (CP)

According to the question solving this equation gives us a pH of 3.16.

pH is a measure of the acidity or alkalinity of a solution, which is expressed on a scale of 0 to 14. A pH of 7 is neutral, with values below 7 being acidic and values above 7 being alkaline. A pH that is too high or too low can have an adverse effect on living organisms, as it can cause them to become ill or unable to survive in the environment. The pH of a solution can be measured with a litmus paper or a pH meter.

The pH of a buffer can be calculated using the Henderson-Hasselbalch equation, which is:
pH = pKa + log ([A-]/[HA])
where [A-] is the concentration of the conjugate base (in this case, the sodium fluoride, NaF) and [HA] is the concentration of the acid (in this case, the hydrofluoric acid, HF).
Using the given values, the equation becomes:
pH = 3.5 × 10⁻⁴ + log (0.040/0.020)
Solving this equation gives us a pH of 3.16.

To learn more about pH
https://brainly.com/question/172153
#SPJ4

The volume of the bubble that will starts at the bottom of the lake at the 4.55°C increases by the factor of the 10.0. The depth of the lake is 67.164 m.

The combined gas law is as :

P₁ V₁ / T₁ = P₂ V₂ / T₂

P₁ = initial pressure of gas in bubble= ?

P₂ = final pressure of gas = 0.980 atm

V₁  = initial volume of gas = V

V₂ = final volume of gas = 8.00 × V

T₁ = initial temperature of gas = 4.55 + 273 = 277.7 K

T₂ = final temperature of gas = 17.35 + 273 = 290.3 K

( P₁ × V ) / 277.7 = ( 0.980 × 8 V ) / 290.3

P₁ = 7.49 atm

The pressure exerted by the water at depth h :

P₁ = P₂  + hρg

Where,

ρ = density

g = acceleration due to gravity = 9.8 m/s²

7.49 × 101325 pa = 0.950 + h × 1 × 9.8

h = 67164 / 1000

h = 67.164 m

The depth of the water is 67.164 m.

To learn more about pressure here

https://brainly.com/question/13929212

#SPJ1

The statement "Substances which have a very low solubility in water are likely to have a positive/negative ∆Hsol" is generally true, with some exceptions. ΔHsol refers to the enthalpy change associated with the dissolution of a substance in water. If the value of ΔHsol is negative, then the process of dissolving the substance in water releases energy (i.e., it is exothermic), and the substance is said to be soluble in water. Conversely, if ΔHsol is positive, then the process of dissolving the substance in water requires energy (i.e., it is endothermic), and the substance is said to be insoluble or only slightly soluble in water.

Substances that have a very low solubility in water are typically hydrophobic (water-repelling), and their intermolecular forces of attraction are stronger than their forces of attraction to water molecules. Therefore, it requires a significant amount of energy to break these intermolecular forces and allow the substance to dissolve in water, resulting in a positive ΔHsol. However, there are some exceptions, such as some salts, which have a high lattice energy and are highly soluble in water despite having a positive ΔHsol.

TO KNOW MORE ABOUT Substances which have a very low solubility CLICK THIS LINK -

brainly.com/question/12728230

#SPJ11

Effect of decreased ocean pH on marine organisms such as coral :

1. CO₂(aq) + H₂O(l) → H₂CO₃(aq)
2. H₂CO₃(aq) → H⁺(aq) + HCO₃⁻(aq)
3. Ca²⁺(aq) + CO₃²⁻(aq) → CaCO₃(s)
4. H⁺(aq) + CO₃²⁻(aq) → HCO₃⁻(aq)

Decreased ocean pH affects marine organisms such as coral through the following steps in this order:

1. Carbon dioxide (CO₂) dissolves in water (H₂O) to form carbonic acid (H₂CO₃).
2. Carbonic acid (H₂CO₃) dissociates into a hydrogen ion (H⁺) and a bicarbonate ion (HCO₃⁻).
3. Calcium ions (Ca²⁺) combine with carbonate ions (CO₃²⁻) to form calcium carbonate (CaCO₃), the primary building material of coral skeletons.
4. Increased hydrogen ions (H⁺) in the water react with carbonate ions (CO₃²⁻) to form more bicarbonate ions (HCO₃⁻), reducing the availability of carbonate ions needed for coral growth.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ11

If a liter of a saturated solution of lanthanum fluoride is prepared and a dilute solution of sodium fluoride (0.01M) is added, the lanthanum fluoride will remain in solution while sodium fluoride will precipitate out. Therefore, option (A) "Sodium fluoride will precipitate out" is the correct answer.

This is because the solubility product constant (Ksp) of lanthanum fluoride is significantly higher than that of sodium fluoride. As a result, the lanthanum fluoride will remain in solution, while the addition of sodium fluoride will exceed its solubility limit, leading to precipitation. The sodium fluoride ions will react with the lanthanum ions to form a less soluble salt, sodium lanthanum fluoride, which will precipitate out of solution.

It is important to note that the addition of sodium fluoride will not make the solution unsaturated. The solution will still be saturated with respect to lanthanum fluoride, but it will become supersaturated with respect to sodium fluoride. Any excess sodium fluoride will precipitate out of solution until the solution reaches a new equilibrium point.

To know more about lanthanum fluoride

brainly.com/question/23848179

#SPJ11

The Kb value for ammonia (NH3) is 1.8 x 10^-5.

To find the pH of the ammonia solution, we need to first calculate the concentration of hydroxide ions ([OH-]) using the Kb value:

Kb = [NH4+][OH-]/[NH3]

1.8 x 10^-5 = x^2 / 0.0030

x = 1.16 x 10^-3 M

Next, we use the [OH-] concentration to calculate the pH:

pOH = -log[OH-] = -log(1.16 x 10^-3) = 2.94

pH = 14 - pOH = 14 - 2.94 = 11.06

Therefore, the pH of a 0.0030 M solution of ammonia is approximately 11.06. Answer: (B) 10.37 (rounded to two decimal places).

To know more about pH, click here-

https://brainly.com/question/15289741

#SPJ11

The quantity of moles of NO₂ gas that forms when 5.20*10⁻³ mol N₂O₅ gas completely reacts: 5.20 x 10⁻³ mol N₂O₅ gas .

Gas is a state of matter in which a substance has no definite shape or volume, existing as a cloud of particles that are typically made up of molecules. It is one of the four fundamental states of matter, along with solid, liquid and plasma. Gases are defined as substances that can be readily compressed and expanded, and which can diffuse rapidly into the surrounding medium.

We are asked to calculate the quantity of moles of NO₂ gas that forms when 5.20 x 10⁻³ mol N₂O₅ gas completely reacts.
We can use the coefficients in the balanced equation to determine the molar ratio between N₂O₅ and NO₂.
For every 1 mole of N₂O₅ that reacts, 2 moles of NO₂ will be formed.
Therefore, the amount of NO₂ gas that forms when 5.20 x 10⁻³ mol N₂O₅ gas completely reacts is:
NO₂ = (2 x 5.20 x 10-3 mol N₂O5) = 1.04 x 10⁻² mol NO₂.

To learn more about gas

https://brainly.com/question/25736513

#SPJ4

The amount of energy evolved can be calculated using the equation ΔrH° = -1396 kJ.

An equation is a mathematical statement that expresses the equality of two expressions. It consists of two expressions separated by an equals sign (=). Equations are used to describe relationships between variables, and can be used to solve for a variable given the values of the other variables. Equations are also used to describe physical laws and other natural phenomena, such as the laws of motion and the principles of thermodynamics. Equations can also be used to describe relationships between different types of data, such as the relationship between temperature and pressure.

We can calculate the number of moles of Cl2 using the equation:moles Cl2 = (5.65 L)(1 mol/22.4 L) = 0.252 mol.The total number of moles of reactants is 0.363 mol.Therefore, the amount of energy evolved during the reaction is -505.4 kJ.

To learn more about equation

https://brainly.com/question/29886207

#SPJ4

The compound for each of the following are: (a) Na₃P is an ionic compound called sodium phosphide, (c) SO₂ is a covalent compound called sulfur dioxide.

Ionic chemistry is a type of chemical bonding which involves the transfer of electrons between two atoms.

Ionic compounds are composed of a metal and a non-metal, while covalent compounds are composed of two non-metals. Na₃P contains a metal (sodium) and a non-metal (phosphorus), so it is an ionic compound. Its IUPAC name is sodium phosphide.

SO₂, on the other hand, contains two non-metals (sulfur and oxygen), so it is a covalent compound. Its IUPAC name is sulfur dioxide. In covalent compounds, atoms share electrons in order to achieve a stable electron configuration. In SO₂, the sulfur atom shares two electrons with each of the oxygen atoms, resulting in a molecule with a bent shape and a characteristic smell. It is used in many industrial processes, such as in the production of sulfuric acid.

To learn more about Ionic

https://brainly.com/question/977324

#SPJ4

The enthalpy change for the reaction C(s) + H2(g) + 1/2O2(g) → HCN(g) represents the standard enthalpy of formation for hydrogen cyanide (HCN).

The enthalpy change for the reaction in which hydrogen cyanide is formed from its constituent elements represents the standard enthalpy of formation for HCN. This reaction can be written as follows:
C(s) + H2(g) + 1/2O2(g) → HCN(g)
The standard enthalpy of formation (ΔHf°) for HCN can be calculated using the enthalpies of formation (ΔHf°) of its constituent elements. The enthalpy change for this reaction can be measured experimentally using calorimetry.
It is important to note that the standard enthalpy of formation is defined as the enthalpy change that occurs when one mole of a compound is formed from its constituent elements in their standard states (i.e., at 25°C and 1 atm). This value is often used to calculate the enthalpy change for reactions involving the compound.
In conclusion, the enthalpy change for the reaction C(s) + H2(g) + 1/2O2(g) → HCN(g) represents the standard enthalpy of formation for hydrogen cyanide (HCN). The calculation of this value requires knowledge of the enthalpies of formation of the constituent elements.

To know more about enthalpy visit: https://brainly.com/question/9111055

#SPJ11

An indicator is a substance that changes its color at a particular pH, transitioning from one color to another color. The specific color change depends on the indicator used.

An indicator is a substance that changes color depending on the pH of the solution it is in. The specific color change will vary depending on the indicator used. Some indicators will go from colorless to colored, while others will go from colored to colorless. Some indicators may even change from one color to another color.

The type of color change that occurs is determined by the chemical structure of the indicator and how it reacts with hydrogen ions in the solution. Therefore, it is important to choose the correct indicator for the specific pH range you are trying to measure.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ11

Answer: D) depends on the indicator

Answer:

The density of no2 in a 4. 50 l tank at 760. 0 torr and 25. 0 °c is 1.88 g/l.

The ionization of HOCl (hypochlorous acid) in solution is dependent on the concentration of H+ ions. Therefore, a salt that could decrease the concentration of H+ ions in solution would also decrease the ionization of HOCl.

Option (D) NaOH is a strong base that could neutralize H+ ions and hence decrease their concentration in solution. Therefore, adding NaOH to a solution of HOCl would decrease the ionization of HOCl in solution.

Option (A) NaCl, option (B) NaOCl, option (C) Na2O, and option (E) BaCl2 do not directly affect the concentration of H+ ions in solution, and hence would not have a significant effect on the ionization of HOCl.

To know more about hypochlorous acid click here:

https://brainly.com/question/16984896

#SPJ11

A) They all behave like metals under certain conditions.

Alkali metals, alkaline earth metals, and halogens are all elements in the periodic table, but they are not all in the same group. Alkali metals are in group 1, alkaline earth metals are in group 2, and halogens are in group 17. Despite being in different groups, these elements do share some common properties. One such property is that they all exhibit metallic behavior under certain conditions. Alkali metals and alkaline earth metals are both highly reactive metals, while halogens are highly reactive non-metals. However, all three groups can conduct electricity, form cations with a +1 or +2 charge, and have relatively low ionization energies.

To learn more about alkali metals, click here: https://brainly.com/question/18153051

#SPJ11

Connecting water to a condenser so that it flows in at the bottom and out at the top is the best way to ensure that the condenser operates effectively.

A condenser is an electrical device used in many applications such as air conditioning, refrigeration, and heat pumps. It is a type of heat exchanger that works by transferring heat from one medium to another by allowing the two mediums to come into contact and exchange heat. Condensers are often used to cool air or liquid by allowing the hot air or liquid to come into contact with a cold surface, which causes the heat to be transferred away. Condensers are also used to convert steam into liquid form, as well as to collect and condense a vapor.

This arrangement allows the hot vapors from the reaction to travel up the condenser, where they come into contact with the cool water flowing down from the top. This ensures that the vapors are cooled, condensed, and collected in the flask below. This arrangement also helps to minimize the risk of the reaction product entering the water supply, as the condensed product will collect in the flask below, rather than the water supply.

To learn more about condenser
https://brainly.com/question/29457387
#SPJ4

Based on the reduction potentials given, the following gives the balanced chemical equation and the correct standard cell potential for a galvanic cell is 2Sc(s)+3Mn²⁺(aq)⇄2Sc³⁺(aq)+3Mn(s) E°=+0.90V, option D.

Electrons are transferred from one species to another during oxidation-reduction processes. If the reaction occurs spontaneously, energy is released. As a result, the energy that has been released is put to good use. To deal with this energy, the reaction must be divided into the two half-reactions of oxidation and reduction. The reactions are injected into them to move the electrons from one end to the other end using two separate containers and wire. Thus, a voltaic cell is produced.

The Gibbs energy of the spontaneous redox reaction in the voltaic cell is primarily responsible for the electrical work produced by a galvanic cell. A salt bridge and two half cells are often its only components. A metallic electrode submerged in an electrolyte completes each half cell. Metallic wires are used to link these two half-cells outside to a voltmeter and a switch. A salt bridge is not always necessary when both electrodes are submerged in the same electrolyte.

Learn more about Galvanic cell;

https://brainly.com/question/29765093

#SPJ4

Complete question:

Based on the reduction potentials given in the table above, which of the following gives the balanced chemical equation and the correct standard cell potential for a galvanic cell involving Sc3+(aq) and Mn2+(aq) ?

A

2Sc3+(aq)+3Mn(s)⇄2Sc(s)+3Mn2+(aq) E°=−0.90V

B

2Sc3+(aq)+3Mn(s)⇄2Sc(s)+3Mn2+(aq) E°=−0.62V

C

2Sc(s)+3Mn2+(aq)⇄2Sc3+(aq)+3Mn(s) E°=+0.62V

D

2Sc(s)+3Mn2+(aq)⇄2Sc3+(aq)+3Mn(s) E°=+0.90V

a) The reaction of KH with NH₃ is a neutralization reaction, and its equation is: [tex]KH + NH_3 \rightarrow KOH + NH_4[/tex]

Neutralization is a process where two different substances react to form a new substance that is not acidic or basic. It is a chemical reaction in which an acid and a base react to form a salt and water. This reaction is called neutralization because the result of the reaction is a neutral solution with pH close to 7. Neutralization reactions are often used to neutralize acids or bases in a solution, in order to make it safe to use. Additionally, neutralization reactions can be used to remove acidic or basic impurities from a solution.

The reaction of KH with ethanol is a proton transfer reaction, and its equation is:

[tex]KH + CH_3CH_2OH \rightarrow KOH + CH_3CH_2O- + H^+[/tex]

b) The conjugate acid-base pairs in the first reaction are NH⁴⁺ and NH₃, and in the second reaction they are [tex]CH_3CH_2O-[/tex] and [tex]CH_3CH_2OH[/tex].

To learn more about neutralization

https://brainly.com/question/23008798

#SPJ4

An element belonging to the alkaline earth family would be expected to have a ionization energy and a electron affinity.

Because they readily give up their two valence electrons to reach a full outer energy level, which is the most stable configuration of electrons, earth metals are extremely reactive. From the top to the bottom of the group, reactivity rises.

Within a group, ionisation energy rises from bottom to top; within a period, it rises from left to right. By analysing how the ionisation energies differ for either the alkali metals (Li through Cs) or the noble gases (He through Rn), the trend within a group may be plainly noticed.

Alkaline earth metals are resistant to accepting electrons and have a stable ns2 structure. As a result, their electron affinities are almost nil.

To know about alkaline earth metal

https://brainly.com/question/12835232

#SPJ4

The no of moles of carbondioxide that can be produced from 3.2 moles of glucose is 6.4 moles.

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, glucose decomposes into ethanol and carbondioxide. Based on the equation as in the image, 1 mole of glucose produces 2 moles of carbondioxide.

This means that 3.2 moles of glucose will produce 3.2 × 2 = 6.4 moles of carbondioxide.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

The number of moles of the CO2 that is going to be produced in the reaction is 6.4 moles.

Stoichiometry is a branch of chemistry that deals with the quantitative relationship between reactants and products in chemical reactions.

We have to note that we have to apply the stoichiometry of the reaction so that we can be able to solve the problem that we have in the case that we are dealing with here.

We know that;

1 mole of glucose produces 2 moles of CO2

3.20 moles of glucose  will produce 3.2 * 2/1

= 6.4 moles of CO2

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

Radon is a naturally occurring radioactive gas that may cause lung cancer.

Radon is a chemical element with the symbol as Rn and atomic number as 86. It is a radioactive, colorless, odorless and tasteless noble gas that occurs naturally as a decay product of radium. It is the heaviest noble gas and is considered to be one of the rarest elements on the Earth.

Radon is highly radioactive and is significant contributor to the background radiation dose received by most of the people. It is the second leading cause of lung cancer after smoking, and exposure to high levels of radon has also been linked to an increased risk of other types of cancer.

To know more about radon, refer

https://brainly.com/question/1121893

#SPJ11

The analyte being tested for in this case is plasma glucose, which refers to the amount of glucose present in the blood. Medical professionals use this analyte to diagnose and monitor patients with diabetes mellitus, a condition in which the body is unable to regulate blood glucose levels effectively.

Quantitative plasma glucose levels are a crucial indicator of a patient's diabetic status. Hyperglycemia, or high blood sugar, is a common symptom of diabetes. When a patient has diabetes, their body either doesn't produce enough insulin (Type 1 diabetes) or can't use insulin properly (Type 2 diabetes). Insulin is a hormone that helps regulate blood sugar levels by facilitating glucose uptake into cells for energy.

Patients with diabetes may experience symptoms such as increased thirst, frequent urination, fatigue, and blurred vision. These symptoms can be managed through monitoring plasma glucose levels and making lifestyle changes such as adjusting diet and exercise. Medications such as insulin and oral hypoglycemic agents may also be prescribed to help manage blood sugar levels.

To know more about plasma glucose,

https://brainly.com/question/31444279

#SPJ11

The pH of a solution formed by mixing 250.0 mL 0.15 M NH₄Cl is measured as 9.26.

Option B is correct.

V = 250 ml of

M = 0.15 NH₄Cl

V = 100 ml

M = 0.20

            pOH= pKb + log(HB+ / B)

                   mol = M × V

     mol = 0.15 × 250

                = 37.5 mmol of NH₄Cl

mol of NH₃ = M × V = 0.2 ×100

                     = 20 mmol of NH₃

mol of NH₃ = M × V = 0.2 × 200

                     = 40 mmol of NH₃

pKb = -log(Kb) = -log( 1.8x10-5) = 4.75

From pOH = pKb + log(HB+ / B)

                     pOH = pKb + log(HB+ / B)

                   pOH = 4.75 + log(37.5/20)

                               pOH = 5.02

pH = 14-pOH = 14-5.02 = 8.98

                              pH = 8.98

pOH = pKb + log(HB+ / B)

pOH = 4.75 + log(37.5/40) = 4.72

pH = 14-pOH = 14-4.72 = 9.26

pH =9.26

The chemical conditions of a solution are reflected in the pH, an important quantity. The pH can regulate the availability of nutrients, biological functions, microbial activity, and chemical behavior.

Temperature is one of the elements that can cause such changes in a synthetic framework, influencing its balance state and pH level. An expansion in temperature makes the framework's balance shift, engrossing the overabundance intensity and prompting the development of H+ particles, which brings about a lessening in the arrangement's pH.

Incomplete question:

Calculate the pH of a solution formed by mixing 250.0 mL of 0.15 M NH₄Cl with 200.0 mL of 0.12 M NH₃. The Kb for NH₃ is 1.8 × 10 -5.

A. 4.74

B. 9.26

C. 9.45

D. 4.55

E. 9.06

Learn more about pH :

brainly.com/question/12609985

#SPJ4