What is the coefficient of the hypochlorite ion when the following equation is balanced?

ClO- + S2O3 2- —> Cl - + SO4 2-

(basic solution)

The regular practise of driving a car to school would be the daily action that would pollute the environment.

This phrase is used to describe all human activities that harm the environment we live in by making it unsafe for the living things that inhabit it. The smoke from exhaust, which is brought on by the burning of gasoline, would be the main source of pollution. It has an adverse impact on the ecosystem because it taints the air, making it hazardous for humans to breathe. It can cause respiratory illnesses in people and other types of poisoning, which has an effect on our health By choosing another mode of transportation or by walking to school, this issue could be lessened.

Learn more about Pollution here:

https://brainly.com/question/28788430

#SPJ4

Anaerobic respiration results in the production of 2 ATP molecules from each glucose molecule

Both aerobic and anaerobic conditions are conducive to glycolysis. Pyruvate enters the citric acid cycle and goes through oxidative phosphorylation, which results in the net synthesis of 32 ATP molecules under aerobic conditions.

Pyruvate undergoes anaerobic glycolysis under anaerobic circumstances, converting to lactate. Two ATP molecules are produced during anaerobic respiration. A monosaccharide containing six carbon atoms and six oxygen atoms, glucose is a hexose sugar.

Aldehyde group is connected to the first carbon, and hydroxyl group is attached to each of the next five carbons. In the course of glycolysis, glucose eventually decomposes into pyruvate and energy, yielding a total of 2 ATP (Glucose + 2 NAD+ + 2 ADP + 2 Pi --> 2 Pyruvate + 2 NADH + 2 H⁺ + 2 ATP + 2 H₂O).

Phophorylation is made possible by the hydroxyl groups. Glucose 6-phosphate is the specific kind of glucose that is employed in glycolysis.

Learn more about anaerobic respiration at https://brainly.com/question/12605249

#SPJ4

Add an excess of calcium hydroxide (Ca(OH)₂).

Adding an excess of calcium hydroxide (Ca(OH)₂) to the experiment would help to produce the maximum amount of chalk (CaCO₃). Calcium hydroxide is a strong base that can react with carbon dioxide (CO₂) in the air to produce calcium carbonate (CaCO₃).

This reaction is exothermic, meaning it releases heat, which speeds up the reaction. By adding an excess of calcium hydroxide, Jane would ensure that there is enough of the reactant to react with all of the carbon dioxide present in the air and form the maximum amount of chalk.

Learn more about chalk from

https://brainly.com/question/23392127

#SPJ1

If you use too much solvent, the solution may become too dilute to produce crystals. It is critical to gradually chill the flask in room temperature and finally in ice water.

Impurities will be trapped within the crystal  in a hurried crystal formation. In addition, the resultant crystals will be smaller.A solvent is a substance that dissolves a solute, resulting in a solution. A solvent is often a liquid, although it can also be solid, gas, or supercritical fluid. Water is a polar molecular solvent and the most commonly employed solvent by living ; all ions and proteins in a cell are dissolved in water within the cell.Solvents are  used in paints, paint removers, inks, and dry cleaning. Organic solvents are used in dry cleaning (for example, tetrachloroethylene); paint thinners (toluene, turpentine); nail polish removers and glue solvents (acetone, methyl acetate, ethyl acetate); spot removers (, petrol ether); detergents (citrus ); and scents.

learn more about solvent here:

https://brainly.com/question/14797683

#SPJ4

The equations will have only one solution.

The y-coefficients are opposites, so you can eliminate the y-variable by adding the equations:

 (2x -y) + (3x +y) = (2) + (-6)

 5x = -4

 x = -4/5 = -0.8

Substituting this into the second equation, we have ...

 3(-0.8) +y = -6

 y = -3.6 . . . . . . . add 2.4 to both sides

The solution is (x, y) = (-0.8, -3.6).

What is an equation?

To know more about equations, click the link given below:

https://brainly.com/question/12788590

#SPJ4

In metals, the valence electrons are considered to be shared by all surrounding atoms.

What is meant by electrons ?

To learn more about  electrons refer to

https://brainly.com/question/26084288

#SPJ4

The qualities of the ocean help it to absorb heat is its surface area.

The ocean temperature in each area is different, this is because each region has a different amount of light intensity. Apart from light, geographical location, wind gusts, and cloud conditions can affect the ocean surface temperature which can change. while the deep ocean tends to have a stable temperature.

Water has the property of absorbing heat more easily than air because of the hydrogen bonds between water molecules. When heat is absorbed it will cause the hydrogen bonds to break and water molecules can move freely so that the surface temperature of the water rises. The more surface area of ​​ocean, the more heat absorbed by ocean.  This causes the surface area of ​​ocean to become one of the ocean qualities that helps absorb heat.

Learn more about heat at:

https://brainly.com/question/12473602

#SPJ4

According to the law of conservation of mass, Statement A. The number of atoms of each element in the reactants is the same as the number of atoms of each element in the products is true about chemical reactions.

The law of conservation of mass is a model indicating that matter cannot be created or destroyed, but it can be changed from one form to another.

Therefore, with this data, we can see that the law of conservation of mass indicates that the total mass of the system or number of atoms remains constant over time.

Learn more about the law of conservation of mass here:

https://brainly.com/question/1992248

#SPJ1

The squirrel is sitting at a height of 7.35 m.

Potential energy is the energy that a body possesses as a result of its position.

The squirrel's potential energy E is given by, if the squirrel has mass m and is at height h.

E=mgh

here, g is the acceleration due to gravity.

m = 0.5 kg; E=36 J

Take the acceleration caused by gravity as an example.

g= 9.8 m/s²

Rewrite the energy equation in terms of h.

h= E/ mg

Substitute the given values and calculate the value of h.

h= E/mg

h= 36J/(0.5 kg x9.8 m/s)

h = 7.35 m

The squirrel is at a height of 7.35 m

learn more about potential energy at https://brainly.com/question/16519428

#SPJ4

A molecule which have atoms of significantly different electronegetivities exhibits polarity. In case of carbon and hydrogen there are no such significant differences. So ethane is non-polar.

Ethane is formed by covalent bond between carbon and hydrogen atoms. One carbon bonds with one another carbon atom and 3 hydrogen atoms. For exhibiting polarity, there must be significant differences in electronegativity.

While considering the C-H bond, electronegativity of carbon is 2.5 and hydrogen is 2.1. The difference is only 0.4, and such a difference does not contribute to polarity.

So, Ethane is a non-polar molecule.

For further information regarding Polarity, kindly refer

https://brainly.com/question/2615067

#SPJ4

An Atomic Mass Unit (AMU or amu) is a measure of mass and is used to express the mass of atomic and subatomic particles.

The Atomic Mass Unit (AMU or amu) of an element/particle constituent is a measure of its atomic mas. The AMUis also known as the dalton (Da) or a unified atomic mass unit (u). The measure of AMU expresses both atomic masses and molecular masses.

AMU is defined as one-twelfth (1/12th) of the mass of an atom of carbon-12 (12C). Carbon-12 (12C) is the most abundant naturally existing carbon isotope, accounting for over 98% of the carbon found in nature. It has an AMU of 12.

The atomic mass of an element/particle constituent measured in amu, is the same as the mass in grams of a single(one) mole of that element.

The atomic mass units of first 20 elements of periodic table are mentioned below:

Learn more about Atomic Mass Unit here:

https://brainly.com/question/489186

#SPJ4

The balanced chemical equation is as follows:

4KClO₃ ₍s₎ ⇒ 3KClO₄ ₍s₎ + 3KCl

The term balanced chemical equation is defined an equation where the number of atoms of each type in the reaction is the equal on both reactants and product sides.

The chemical equation must be balanced in order to obey the law of conservation of mass. When the number of different atoms of elements in the reactants side equals the number of atoms in the products side, the chemical equation is balanced.

Thus, The balanced chemical equation is as follows:

4KClO₃ ₍s₎ ⇒ 3KClO₄ ₍s₎ + 3KCl

To learn more about the balanced chemical equation, follow the link;

https://brainly.com/question/28294176

#SPJ1

Answer:

the measure of an object s hotness

When observed under a microscope, an impure substance is a non-homogeneous mixture in which some components have various colours or textures.

A process called recrystallization is used to clean an impure chemical in a solvent. The idea put forward here is that as temperature rises, most solids become more soluble. The process of fractional crystallisation is also known as recrystallization. A pure substance should ideally show up as a network of big crystals after recrystallization. If not, it might be beneficial to reheat the flask and let the contents cool more gradually. The appearance of the pure substances is homogenous A homogeneous combination (a pure substance) manifests as regularity. For example, a pure substance will have the same colour or texture on all sides, regardless of its size, when viewed. Steel and pure water are two examples of pure things.  

Learn more about Recrystallization here:

https://brainly.com/question/20912804

#SPJ4

After 116 years, 125 g of strontium-90 would still be present.

Describe half-life.

A substance's half-life is the amount of time needed for half of a radioactive substance's original quantity to degrade. It is a phrase that is used in nuclear chemistry to describe how quickly unstable atoms radioactively decay into other nuclear species by emitting particles or the amount of time needed for the rate of radioactive material disintegrations per second to drop to half of what it was initially.

The number of half-lives needed to compute the mass of strontium-90 after 116 years is calculated as follows: 116/20=4 half-lives.

The mass of Sr-90 during the first half life is 2000/2=1000 g.

Sr-90's mass is 1000/2, or 500 g, during its second half life.

Sr-90 mass at its third half-life is 500/2, or 250 g.

Sr-90 mass equals 250/2=125 g at the fourth half-life.

To learn more about half life ,here:

https://brainly.com/question/1160651

#SPJ4

The chemical element protoactinium, often known as protoactinium, has the atomic number 91 and the symbol Pa. The balanced nuclear equation for the decay of protactinium-238 to uranium-238 is;

²³⁴Pa₉₁ --> ⁰e₋₁ + ²³⁴U₉₁

It is an actinide metal that is thick, silvery-gray, and easily interacts with oxygen, water vapor, and inorganic acids. Protactinium normally exists in the oxidation state +5, however, it can also adopt +4, +3, or even +2 states when it forms different chemical combinations.

Protactinium concentrations in the Earth's crust typically range from a few parts per trillion to a few parts per million in certain uraninite ore occurrences. There are currently no uses for protactinium other than scientific research due to its rarity, high radioactivity, and severe toxicity. For this reason, protactinium is primarily collected from spent nuclear fuel.

Want to know more about Uranium-238 visit the link which is given below;

https://brainly.com/question/5688204

#SPJ4

1) X is reduced and Y is oxidized

2) Y is a better oxidizing agent than Z

3) X is a better oxidizing agents than Y

4) The order of the oxidizing abilities are;

X > Y > Z

An oxidizing agent is a chemical substance that accepts electrons from other substances, thereby oxidizing them. In this process, the oxidizing agent becomes reduced itself. Oxidation and reduction occur simultaneously and are known as redox reactions.

An oxidizing agent has the ability to transfer electrons to another substance, resulting in an increase in oxidation state (the number of electrons an atom has lost or gained) of the oxidized substance and a decrease in oxidation state of the oxidizing agent.

Learn more about oxidizing agent:https://brainly.com/question/10547418

#SPJ1

Number one question the answer is 4

This is an illustration of Boyle's law, which states that when mass and temperatures are held constant, a gas's volume changes inversely with pressure at 0.05 atm.

According to Boyle's law, pressure and volume of a gas are always inverse proportion at a specific temperature. It states that the pressure inside the lung will drop as the size of the lungs expands during inhalation.

When you inflate your bicycle tires, you can see how Boyle's Law is used in practice. The gasses inside a tire are squeezed and crammed closer together when air is pumped into it. This raises the gas's pressure, and It starts to press up against the tire walls.

To know more about Boyles law visit:

https://brainly.com/question/1437490

#SPJ1

The NaOH solution has a 159.75 mL capacity.1.500 M H3PO4 solution in 25.00 mL.

How much NaOH was used for the titration?

In a titration of the two chemicals, 26.60 mL of sulfuric acid is neutralized by 32.20 mL of sodium hydroxide that has a concentration of 0.250 mM.

In a titration of the two chemicals, 26.60 mL of sulfuric acid is neutralized by 32.20 mL of sodium hydroxide that has a concentration of 0.250 mM.

The percent volume/volume of a solution can be calculated using the following formula, which bases its results on the milliliter as the unit of volume (v):

As mL of solute per 100 mL of solution, % v/v is expressed.

X% = 5.0 mL HCl/100 mL of solution is a good illustration.

X/100 = 5.0/100. 100X = 500. \sX = 5.0%%

To learn more about volume refer to:

brainly.com/question/12410983

#SPJ1

Answer:

Omalleable

Explanation:

Non-metals are very brittle, and cannot be rolled into wires or pounded into sheets. Conduction: They are poor conductors of heat and electricity. Luster: These have no metallic luster and do not reflect light.

According to the U.S. Department of Energy, data centers use roughly 2% of the world’s energy.

Data centers are responsible for a significant portion of the world’s energy consumption.

According to the U.S. Department of Energy, data centers use roughly 2% of the world’s energy, with that number estimated to grow as more businesses and organizations move their operations to digital and cloud-based systems.

That may not seem like a lot, but when you consider the amount of energy used to power, cool, and maintain data centers, the overall cost to the environment can be quite significant.

Data centers use energy for various purposes, from powering hardware such as servers and storage systems, to cooling the centers with air conditioning.

Data centers also require energy for their backup systems, such as generators and UPSs.

In addition, data centers need energy for their networking systems and for running other applications and services, such as data analytics and machine learning.

All of these factors contribute to the overall energy consumption of data centers.

To learn more about energy, click here:

https://brainly.com/question/1932868

#SPJ4

There are 23 atoms of Fe in a 55.845 gram. As a result, after dividing our mass of 239 grams by the iron formula mass of 55.84 grams per bole, formol equals after calculation.

Use the millimeters to mole formula to calculate the molecular weight n, of a substance with a given mass, m, (in grams) accurately. n = m / M, where M is the substance's molar mass also known as gram-molecular weight. a substance's molecular weight expressed as a mass in grams. Example: NaCl salt weighs 58.44 grams per gram-mole. American Meteorological Society, copyright 2022.

Number of Avogadro = 6.023 × 10²³. The products of every chemical reaction are measured using the Avogadro number. 1 mole of atoms, molecules, or particles is equal to 6.023 x 1023. Calculating the number of molecules is as follows: mole number = quantity of material / mass of one mole.

To know more about mass visit :

https://brainly.com/question/26789700

#SPJ4

There are 23 atoms of Fe in a 55.845 gram. As a result, after dividing our mass of 239 grams by the iron formula mass of 55.84 grams per bole, formol equals after calculation.

Use the millimeters to mole formula to calculate the molecular weight n, of a substance with a given mass, m, (in grams) accurately. n = m / M, where M is the substance's molar mass also known as gram-molecular weight. a substance's molecular weight expressed as a mass in grams. Example: NaCl salt weighs 58.44 grams per gram-mole. American Meteorological Society, copyright 2022.

Number of Avogadro = 6.023 × 10²³. The products of every chemical reaction are measured using the Avogadro number. 1 mole of atoms, molecules, or particles is equal to 6.023 x 1023. Calculating the number of molecules is as follows: mole number = quantity of material / mass of one mole.

To know more about mass visit :

brainly.com/question/26789700

#SPJ1

The reduction reaction is given as :

The reduction reaction is the reaction in which the addition of the hydrogen takes place and the addition of the electropositive element and the removal of the oxygen or any of the electronegative atom.

The reduction reaction is given below as :

The gain of the electron is also called as the reduction reaction. The one which is reduce will acts as a oxidizing agent.

To learn more about reduction reaction here

https://brainly.com/question/9029792

#SPJ4

Its motion's corresponding wavelength is λ = [tex]1.32 \times 10 ^{-35}[/tex]

The wavelength, which will also apply to troughs, is the separation between two wave crests. The frequency is measured in cycles per second (Hz), which is the quantity of vibrations that cross a specific area in a second (Hertz). In this article, the relationship between wavelength and frequency is covered.

The ball (m) has a mass of 0.5 kg.

The ball is moving at a speed of 100 metres per second.

The de Broglie matter-wave equation reveals the following

[tex]\lambda = \frac{h}{mv}[/tex]

where m is mass of the body and v is the velocity and h is height of the body.

[tex]\lambda = \frac{ 6.62\times10^{-34}}{0.5 \times 100 }[/tex]

λ = [tex]1.32 \times 10 ^{-35}[/tex].

To learn more about Wavelength :

https://brainly.com/question/14709695

#SPJ4

The heat energy needed to change the 5.25  gram sample from a temperature of 49.5 to 40.5 °C is given 10.4  J. Then, the specific heat of the metal is 0.22 J/°C g.

Calorimetry is an analytical  technique used to determine the heat energy absorbed or released by  a system. The calorimetric equation relating the heat energy q with the mass of the substance, m, specific heat, c and temperature difference, ΔT is given as:

q = m c ΔT.

Given that the mass of the sample of iron = 5.25 g

temperature difference   ΔT = 49.5 - 40.5 = 9 °C

specific heat c = 0.450 J/ g °C.

The heat energy absorbed by the sample is calculated as follows:

10.4 J = 5.25 g ×  c J/ g °C × 9 °C.

Then,

c = 10.4 J / (5.25 g ×9 °C )

  = 0.22 J/ g °C

Therefore, the specific heat of the metal is 0.22 J/ g °C.

Find more on calorimetry :

brainly.com/question/11477213

#SPJ

The building block of all the elements and the smallest component into which an element can be divided is called as an atom.

An atom is the smallest part or the component into which the elements can be divided. Atom is the building block of the matter. The basic particles that an atom made up of  are electrons, protons, and the neutrons.

The example is : An electron of a hydrogen atom will behave similar as the electron of an oxygen atom. Electron is the sub atomic particle of an atom and it cannot retain its chemical properties.

Thus , atom is the building block of all the elements.

To learn more about elements here

https://brainly.com/question/14347616

#SPJ4