What is the commonly attributed name of the threat actor and an example of one of the open-source software that they have trojanized?.

Answer: Assign or Edit a task in a task list

Explanation:

Tap more then tap the Tasks tab    

Go to the list where you want to edit a task

Tap the task you want to edit.                                                                          

The option that is NOT a Neo-Luddite criticism of computers is option D) None of the above.

British weavers and textile workers who disapproved of the growing use of automated looms and knitting frames were the first Luddites. The majority of them were expert craftspeople who had spent years honing their craft, and they were afraid that untrained machine operators were robbing them of their source of income. 2

Luddites mainly objected to the rise in popularity of automated textile machinery, which threatened the jobs and way of life of skilled workers by allowing them to be replaced by less expensive and less qualified workers.

Therefore, An anti-modern technological philosophy is known as eo-Luddism or neo Luddism. The term "Luddite" is typically used to denigrate those who exhibit technophobic tendencies. The name is derived from the 1811–1816 period of time during which the English Luddites were active.

Learn more about criticism from

https://brainly.com/question/2947946
#SPJ1

Answer:

13

Explanation:

since your function is for the sum of 2 squares and the parameters are 2,3. you should do num1^2 + num2^2 which will be 2^2 +3^2

4+9 = 13

so your answer is 13

Repetitive Stress and Strain Syndrome can result from performing the same action repeatedly while using technology.

Computer users frequently experience repetitive strain injury as a result of poor ergonomics, improper posture, stress, and repetitive motion. Numerous signs and symptoms point to the possibility of repetitive strain injury in computer users.

The most typical case of RSI is tendonitis, whereas carpal tunnel syndrome is a more uncommon and dangerous condition.

The slow accumulation of damage to muscles, tendons, and nerves as a result of repetitive actions is known as a repetitive strain injury (RSI), also known as a repetitive stress injury. RSIs are widespread and can result from a variety of activities, including using a computer mouse. typing.

To learn more about Repetitive Stress refer to:

https://brainly.com/question/1394967

#SPJ1

An algorithm is just a set of instructions used to do a specific task. They serve as the foundation for programming and enable the operation and decision-making of devices like computers, cellphones, and webpages.

Programming algorithms are methods or procedures for solving problems. It is predicated on performing several planned activities that, when combined, have an end result.

Therefore, indicate how to carry out a task, and your computer will always carry out that task in that same manner. An algorithm operates by following a set of input-based steps.

Learn more about algorithm here:

https://brainly.com/question/23079607

#SPJ1

Answer:

a lot of new futures

Explanation:

like one might be 3d images another might be and we are currently heading to A.I generated images(most of the time art)

The things I think digital media will be like in 25 years is that Some important components make up the future of digital transformation. It's anticipated that access to remote operations would improve. The idea of employee well-being is anticipated to rise in organizational importance. Predictive analytics may be enabled via digital twin computer power.

Digital media is always changing as new tools are developed, consumer needs change, and technologies get better in terms of quality and accessibility. The development of mobile video, virtual reality, augmented reality, and the more sophisticated application of data analytics will all have an impact on the future of digital media.

Technology will be applied in far more inventive ways in 25 years than it has ever been. Robots may soon assist humans in daily tasks like cooking, cleaning, and even driving automobiles.

Learn more about digital media from

https://brainly.com/question/25356502
#SPJ1

Do nothing, because changes are saved automatically. After working on your MakeCode Arcade program for several minutes, you want to save your progress and back up your game so that it is not lost

What is  make code arcade program?

MakeCode Arcade is a code editor that allows you to create Retro Arcade games for the web and handheld consoles.

So there are many puzzles and games for this one advantage is you can build and solve all the puzzles anywhere you want also the game comes back from the earlier one even if you don't save, hence we can say this code editor is amazing and it helps you in achieving the good programming knowledge

Hence to conclude the make code arcade program is the best one

To know more on the code arcade program follow the link given below:

https://brainly.com/question/28144559

#SPJ1

Answer:

its c

Explanation: Im taking the test

Answer:

A and C

Explanation:

Trust me Bro

The process that can reduce expensive redundant tests that are ordered because one provider does not have access to the clinical information stored at another provider's location is telehealth. The correct option is c.

In order to promote long-distance clinical health care, patient and professional health-related education, public health, and health administration, telehealth refer to the utilization of electronic information and telecommunications technologies.

Internet, store-and-forward images, streaming media, terrestrial and wireless communications, as well as videoconferencing, are examples of technologies.

Therefore, the correct option is c. telehealth.

To learn more about telehealth, refer to the link:

https://brainly.com/question/28819324

#SPJ1

Answer:

You can view the solution for an assignment in multiple ways: Through the Assignments page.

...

View Solution References via the Resources Page

Navigate to the Resources page on the left-hand sidebar.

Choose Solution References.

Click Switch Course and choose which course you would like to view solutions for!

Explanation:

The given code or program have some errors, the corrected one is given below:

function start() {

   // Go to the top of the stairs

   for (var i = 0; i < 4; i++) {

       climbStep();

   }

   // Go down the slide and collect the balls

   for (var i = 0; i < 4; i++) {

       getABall();

   }

}

// Makes Karel climb up one step

// Precondition: Karel is facing East at the bottom of a step

// Postcondition: Karel is facing East on top of the next step

function climbStep() {

   turnLeft();

   move();

   turnRight();

   move();

}

// Has Karel go down part of the slide to collect

// one ball.

// Precondition: Karel is facing East above a ball

// Postcondition: Karel is facing East on the next ball (if there is one)

function getABall() {

   move();

   takeBall();

   turnAround();

   move();

   turnAround();

}

// Turns Karel 180 degrees to face the opposite direction

function turnAround() {

   turnLeft();

   turnLeft();

}

Thus, this is the corrected code.

For more details regarding code, visit:

https://brainly.com/question/20712703

#SPJ2

Your question seems incomplete, the probable complete question is:

CodeHS Karel The Dog - 3.4.4: Go Down the Slide: Part Two

*CODE ONLY FOR THAT PART*

function start(){

// Go go the top of the stairs

for(var i = 0; i < 4; i + 1){

climbStep();

}

// Go down the slide

for(var i = 0; i <= 4; i++){

getABall();

}

}

// Makes Karel climb up one step

// Precondition: Karel is facing East at the bottom of a step

// Postcondition: Karel is facing East on top of the next step

function climbStep(){

turnLeft();

move();

turnRight();

move();

}

// Has Karel go down part of the slide to collect

// one ball.

// Precondition: Karel is facing East above a ball

// Postcondition: Karel is facing East on the next ball (if there is one)

function getABall(){

move();

turnRight();

move();

takeBall();

turnLeft();

}

PLEASE TRY TO FIX THE CODE

The one way that makes sure your material is in a logical order on your slides is arranging them in an orderly manner, easy to understand by the audience, and when presented

PowerPoint presentation is a service of Microsoft Office. When organizing your slides for a presentation, it's important to arrange them logically. One thing to keep in mind when doing this is your objectives.

Once you've established these, you can start by organizing your presentation's table of contents, introduction, abstract, chapters, conclusion, and references in an orderly fashion that will help your audience understand your point.

Therefore, one way is when presenting them, arrange them such that they are clear and easy for the audience to understand.

To learn more about PowerPoint presentation, refer to the link:

https://brainly.com/question/14498361

#SPJ1

The statements belong in a procedure’s epilogue when the procedure has stack parameters and local variables is option A: mov ebp,esp

pop ebp.

A function's prologue is what happens at the start of it. Its duty is to initialize the called function's stack frame. The converse is true of the epilog, which occurs last in a function and has the role of restoring the stack frame of the calling (parent) function.

Hence, mov ebp, esp transfers the current stack location to EBP, the stack's base. Now that we have a reference point, we can use it to refer to local variables that are stored on the stack. EBP's value is constant today.

Learn more about procedure’s epilogue from

https://brainly.com/question/20428921
#SPJ1

Answer:

Pseudocode basically means fake code.

Explanation:

Sometimes, when you want to write some code in an easy way for people to understand you would write the code using made-up examples that represent the real value. Pseudocode is also used to first outline the code you are trying to write. So you can work from your outline and convert it to functional code.

Although usually, the syntax should be the same as the coding language it is representing.

An example would be: if I had to show you a script for a train journey and I wanted you to easily be able to understand it, I could do something like this:

function trainJourney() {

   trainEngineStart();

   trainMoveForwards();

   trainTurnLeft();

   trainTurnRight();

   trainEngineStop();

}

None of the above code would actually work, but its a  representation of what the code should be doing.

Hope this helped!

I have attached the design of the weather station sequence diagram

What is the interaction between the data collection subsystem and instruments?

An executable software system is developed during the software design and implementation stage of the software engineering process. Software design is a creative activity in which you determine the relationships between software components based on the needs of a client. The process of making the design into a program is called implementation. There is always a connection between these two pursuits.

Commercial off-the-shelf (COTS) systems can now be purchased in a wide range of fields and customized to meet the needs of the users. When you create an application in this fashion, the design phase is now focused on how to use the system's configuration options to meet the system requirements.

Hence to conclude following the above suitable steps we can achieve the diagram

To know more on software design follow this link

https://brainly.com/question/26135704

#SPJ9

Answer:

D

Explanation:

they are mostllikely to need it the most

In the MakeCode micro:bit reaction speed test program, the first step in testing a user's reaction speed is: A. Prompt the user to press the "A" button.

The MakeCode micro:bit can be defined as a programming software that is designed and developed by Microsoft Inc., in order to enable the measurement of a student’s reaction time and speed in completing a circuit path on a cardboard pad.

Additionally, the reaction time and speed of a student can be measured in both an undistracted and a distracted environment.

In order to take the measurement of a user's reaction speed, the first step is to prompt him or her to press the "A" button because it is designed and developed to test the reaction time of the computing system. Consequently, the computing system respond to the human interaction, as well as the reaction speed.

Read more on MakeCode here: https://brainly.com/question/26855035

#SPJ1

Answer:

visual basic

Explanation:

Imports System

Module Module1

   Sub Main()

       For i as Integer = 0 to 100

           If (i Mod 5) = 0

               Console.WriteLine(i)

           End If

       Next

   End Sub

End Module

You must write a loop that prints 1 to 100 with a difference of 5 between two consecutive numbers using Visual Basic Programming Language.

For a better understanding, start at 0 and increment each value by 5 until you reach 100.

Loops in Visual Basic

Visual Basic loop structures allow you to run one or more lines of code repetitively. You can repeat the statements in a loop structure until a condition is True, until a condition is False, a specified number of times, or once for each element in a collection.

For Loops

The For...Next construction performs the loop a set number of times. It uses a loop control variable, also called a counter, to keep track of the repetitions. You specify the starting and ending values for this counter, and you can optionally specify the amount by which it increases from one repetition to the next.

CODE:

Imports System

Module Module1

   Sub Main()

       For intValue as Integer = 0 to 100

              If (intValue Mod 5) = 0

              Console.WriteLine(intValue)

       End If

       Next

    End Sub

End Module

To know more about Visual Basics, visit: https://brainly.com/question/28258692

#SPJ13

Answer:

I don't know why there is answer already in question??

answer for my this question please..

Explanation:

During  Defining the Redesign (Phase 1) phase of the project  web surveys were performed

What is defining the Redesign phase?

An existing web presence that has been redesigned is given a visual makeover or rearrangement. A redesign primarily concerns the layout, while a relaunch concentrates on technical changes and content revision. It doesn't modify technical attributes the way that switching to a new content management system or URL would.

The following are the steps to redesign:

1. Introducing the Case for a Product Redesign.

2. Rework Data and Research.

3. The Bolts and Nuts.

4. Still the same, but better.

5. Start.

6. Onboarding.

7. Update Regularly

Therefore we can conclude that by using the above steps we can redesign any kind of product.

To know more on redesign follow this link:

https://brainly.com/question/1246610

#SPJ4

The reason that it important for webpage publishers to address these issues before posting content is that the primary goal of having interesting material on a website is to inform and educate users. Without content, no one will understand your company's mission, values, or how they can take advantage of what you have to offer.

The methods and tools should they use to prevent frustration from users like Erik is by In-depth investigation and monitoring are essential to preventing user annoyance and efficiently resolving it. We strongly advise you to monitor user behavior and analyze it in order to identify areas that could utilize improvement.

Error messages, failed network connections, lengthy download times, and difficult-to-find features were the most often mentioned causes of the frustrating experiences. Between 30.5% and 45.9% of the time spent on the computer was lost as a result of the frustrating experiences.

A  webpage publishers is a person or business that maintains or manages a website; one who uploads, creates, or updates content on web pages.

Hence, When a person is unable to get beyond a challenge or accomplish a goal, user frustration results. This indicates that your app isn't performing as your users would like or need. Even worse, a sizable portion of users may currently be experiencing these issues with your app, costing you users and money.

Learn more about webpage publishers from

https://brainly.com/question/14329350
#SPJ1

Enquire, read, recite, review, and survey. Learn how to extract as much information as you can from any class's required texts by using the techniques below. The knowledge you get through reading is significant, so keep that in mind.

A survey is a set of inquiries designed to elicit certain information from a particular population. Surveys can be carried out via the phone, by mail, online, at street corners, and even in shopping centers.

SQ3R is a comprehension technique that encourages students to reflect on the content they are reading as they read. SQ3R, which is sometimes referred to as a study technique, teaches students how to read and think like good readers in order to help them "get it" the first time they read a material.

Thus, According to research, pupils who used the SQ3R reading comprehension approach performed reading tasks. Enquire, read, recite, review, and survey.

To learn more about the survey, follow the link;

https://brainly.com/question/13532910

#SPJ1

It is easier to fix errors in modular programs than in non-modular programs because errors in a single module are easier to identify and edit.

To learn more about modular program, refer to

https://brainly.com/question/28516170

#SPJ1

Following is the decision program for a while loop

import java.util.Scanner;

class DecisionLoop {

 public static void main(String[] args) {

   int n;

   Scanner input = new Scanner(System.in);

   System.out.println("Input an integer");

   while ((n = input.nextInt()) >= 50 && <=100) {

     System.out.println("You have entered " + n);

     System.out.println("You are passed");

   }

   System.out.println("its a fail");

 }

}

What is a loop?

A "While" Loop is used to repeat a specific block of code an unknown number of times until a condition is met. For example, if we want to ask a user for a number between 1 and 10, we don't know how many times the user may enter a larger number, so we keep asking "while the number is not between 1 and 10."

A while loop is a loop that iterates through the code specified in its body, also known as a while statement until a predetermined condition is met. The loop ends if or when the condition is no longer met.

Hence to conclude the while loop is the one which is used with along the for

To know more on loops follow this link

https://brainly.com/question/15086216

#SPJ1

The MakeCode micro bit reaction speed test program the first step detect is the user's input. Hence option B is correct.

Makecode is defined as a free, open-source tool for building fun, progressive computer science learning activities that assist programming in the real world.

A free, open-source platform for developing projects for the BBC Micro:bit is Microsoft MakeCode. Switch between the blocks, JavaScript, and MakeCode Python views while connecting colored blocks that relate to hardware characteristics and computer science basics.

Thus, the MakeCode micro bit reaction speed test program the first step detect is the user's input. Hence option B is correct.

To learn more about makecode, refer to the link below:

https://brainly.com/question/28555167

#SPJ1

The cell that would be clicked on to make that change is D3. The correct option is D.

A cell is formed by joining a row and a column. In other words, it is the intersection of a row and a column. Columns are basically labeled with letters like A, B, C, while rows are labeled with numbers like 1, 2, 3. Based on its column and row, each cell has its own name or cell address.

In Microsoft Excel, a cell range is a grouping of cells. It can be mentioned in a formula.

Because the West Region's sales for Q3 need to be updated to $15,740 following the final audit of sales results, the cell that would be clicked on to make that change is D3.

Thus, the correct option is D.

For more details regarding a cell range, visit:

https://brainly.com/question/15513083

#SPJ1

Pseudocode to Add Two Numbers

To learn more about Pseudocode, refer to

https://brainly.com/question/24953880

#SPJ1

In algorithm-based fields like programming, the word "pseudocode" is widely used.

Pseudocode to Add Two Numbers

To learn more about Pseudocode, refer to

brainly.com/question/24953880

#SPJ1

Research is the methodical consideration of investigation into a certain issue or topic using scientific techniques.

Research is a methodical inquiry to describe, explain, forecast, and manage the observed phenomenon, according to American sociologist Earl Robert Babbie. Both inductive and deductive techniques are used.

Deductive techniques support an observable occurrence whereas inductive techniques examine it. Deductive techniques are more frequently connected with quantitative analysis, whereas inductive strategies are associated with qualitative research.

The purpose of doing research studies is to learn new facts or to provide an answer to a question regarding how people learn, behave, and function.

Therefore, Research is the methodical consideration of investigation into a certain issue or topic using scientific techniques.

To learn more about research, refer to the link:
https://brainly.com/question/18723483

#SPJ1

Rationale is a core component that makes the Teaching Interaction Procedure differ from others. Hence option d is correct.

Teaching interaction procedure is defined as an effective training method for pro-social behaviors that is based on applied behavior analysis. Children that connect with their peers in a positive way should be praised and given positive feedback.

Rationale is defined as the primary cause or causes behind why something happens. Finding the research gap that your study will fill should be the first step in explaining the motivation for your investigation.

Thus, rationale is a core component that makes the Teaching Interaction Procedure differ from others. Hence option d is correct.

To learn more about Teaching Interaction Procedure, refer to the link below:

https://brainly.com/question/16348155

#SPJ1