What is the coordinate for the last electron placed in the Br drawing

When sodium carbonate is dissolved in water, the equation is [tex]Na_2CO_3 (s) --- > 2Na^+ (aq) + CO_3^{2-} (aq)[/tex].

When carbon dioxide is placed in water, aqueous carbon dioxide is formed:  [tex]CO_2 (g) --- > CO_2(aq)[/tex]

Some compounds are water-soluble, some are just partially soluble, while others are insoluble in water. Some soluble or partially soluble substances dissociate in water into their component ions. These substances are said to be ionic.

Sodium carbonate, like every other sodium salt, is soluble in water. It dissolves in water to form an aqueous solution of sodium carbonate.

While in solution, sodium carbonate dissociates into its component ions according to the following equation:

[tex]Na_2CO_3 (s) --- > 2Na^+ (aq) + CO_3^{2-} (aq)[/tex]

Carbon dioxide, on the other hand, does not dissociate in water. Instead, it dissolves in water where most of it remains as aqueous carbon dioxide in equilibrium with a small amount of hydronium ion and hydrogen carbonate ion.

Since the hydronium and hydrogen carbonate ions formed are so minute, the equation of the reaction can be written as: [tex]CO_2 (g) --- > CO_2(aq)[/tex]

More on the dissolution of substances can be found here: https://brainly.com/question/28580758

#SPJ1

Tests for the presence of cyclohexanol.

The Lucas test is a chemical reactant test for determining the presence and degree of alcoholism in solution. Like most substances, cyclohexanol has many chemical properties, one of which is the presence of alcohol groups.

The presence of this chemical group allows the detection of cyclohexanol using the Lucas test. The Lucas test causes a reaction in the presence of alcohol, converting the alcohol to chloroalkanes, which tend to be poorly soluble in aqueous solutions. Given this, a positive result would appear to be that the solution is separating into cloudy areas containing chloroalkanes on top of a much clearer layer.

A bromine water test is performed to identify molecular unsaturation. Since cyclohexanol is a saturated molecule, electrophilic addition of bromine does not occur. Cyclohexanol has no π-unsaturation, so it is not nucleophilic. It does not react with bromine unless energy is supplied in the form of light or heat. So no red brown color will be observed during the reaction.

To know more about cyclohexanol visit:

https://brainly.com/question/6036281

#SPJ4

Answer: Sodium Chloride has nothing in common with sodium or chlorine

Explanation:

I hope this helped ;)

F is the most electronegative atom on the Periodic Table, and electronegativities rise from the bottom to the top of the Group.

In comparison to water, the halogens are substantially more soluble in organic solvents like hexane. Since neither hexane nor the halogens are polar, van der Waals dispersion forces are the only intermolecular interactions acting between them.

The capacity of an atom to attract electrons to itself is known as electronegativity. Halogens have a strong attraction to electrons and hence have high electronegativity values because they only require one electron to complete an octet.

Although polar by nature, alkyl halides are very insoluble in water.

learn more about electronegativity refer

https://brainly.com/question/24977425

#SPJ4

The number of oxygen molecules required for two glucose molecules to undergo cellular respiration is 12.

To know more about glucose visit:

https://brainly.com/question/2396657

#SPJ4

Plants use sunlight and cellular respiration to transform carbon dioxide into the hydrocarbon molecule glucose, which is then ingested by the plants.

During photosynthesis, oxygen and glucose are created from water and carbon dioxide; the plant uses the glucose and produces oxygen as a waste product.

In the process of cellular respiration, oxygen & glucose are transformed into carbon dioxide and water. Carbon dioxide, water, & ATP, which would be converted into energy, are the process' byproducts.

The main purpose of photosynthetic is to transform chemical energy into solar energy, which is then stored for future use. This mechanism primarily provides energy to the planet's life systems.

Learn more about photosynthesis, here:

brainly.com/question/9175642

#SPJ1

The percent by mass of copper to alloy is 8.0%.

The relative proportions of each element in a compound are shown by the percent composition. The formula for mass percent for each element is:

mass percent = (Mass of Solute / Mass of Solution) x 100%

Typically, grams are used as the unit of mass. The term mass percent is sometimes referred to as weight percent or w/w%. The total mass of all the atoms in a mole of the compound is the molar mass. The total of all the mass percentages ought to equal 100 percent.

We know that,

the percent by mass = (mass solute/mass solution) × 100

Given,

Mass of copper = 8.0g

Mass of alloy = 100g

the percent by mass = (8.0 g / 100 g) × 100

percent by mass = 8.0%

Thus, the percent by mass of copper to alloy is 8.0%.

Learn more about percent by mass here:

https://brainly.com/question/5394922

#SPJ4

The source of the strength exchange in a chemical response: the primary contribution to ΔH is the difference inside the bond energies of reactants and merchandise.

A chemical reaction is a procedure that leads to the chemical transformation of 1 set of chemical materials to another. A chemical reaction is a technique wherein reactants react chemically and convert into products by using chemical transformation. as an instance, in the respiratory – we inhale oxygen which reacts with glucose and produces carbon dioxide, water, and electricity.

A chemical reaction is a method wherein one or more substances, the reactants, are converted to at least one or more exclusive materials, the goods. substances are both chemical elements or compounds. Chemical reactions permit dwelling matter (cells, animals, people, insects) to grow, increase, reproduce, and adapt.

Learn more about chemical reactions here:

https://brainly.com/question/11231920

#SPJ4

In order for electrolysis to take place, a salt such as Na2SO4 is required. It makes available the ions Na+ and SO42, both of which are drawn to the electrodes in the solution and move toward them as a result. They do not experience a discharge when brought close to the electrodes. However, they are able to cancel out the electric charges carried by the ions that are formed as a result of the destruction of water by these electrodes. Let's check out what's happening at each of the electrodes.

At the cathode, often known as the negative pole, water breaks down in the following manner:

2H2O+2e−⟶H2+2OH−.This is only conceivable if some positive ions are available near the cathode to compensate for the negative charges emerging in the solution with these freshly produced OH ions. The only way this can happen is if there are some positive ions available near the cathode. In the absence of positive ions, such as Na+, in the vicinity of the cathode, the newly formed OH ions would function as a barrier to subsequent electrons coming from the external circuit, preventing those electrons from reaching the electrode and preventing the electrode from interacting with water. The electrolysis would come to a halt as a result.

At the anode, often known as the positive pole, the following reactions take place in water:

4H2O⟶O2+4H++4e− .This is only conceivable if there are negative ions coming near the anode to compensate for the positive charges that are forming in the solution as a result of these freshly produced H+ ions. A positively charged solution would result if the solution near the anode did not include any negative ions, such as SO42. Instead, the solution would contain the new H+ ions. This would stop any further electrons from being released from the water as a result. The electrolysis would come to a halt as a result.

The process culminates in a transformation of the solution's chemical makeup near the electrodes. When you go closer to the cathode, you'll notice that the solution has a higher concentration of NaOH. In the vicinity of the anode, the solution includes an increasing amount of H2SO4. Naturally, if you agitate and combine solutions that are anodic and cathodic, the acid and the base will neutralize each other, which will result in the solution being regenerated to contain the initial salt.

Know more  about Electrolysis at,

https://brainly.com/question/12054569

The kind of stars that creates heavier elements such as copper and zinc is the first-generation stars. More specifically, the explosions (supernovae) that these stars underwent.

The first-generation stars were the stars that were formed after the Big Bang happened. These stars consisted mainly of hydrogen and helium. When these stars exploded in supernovae, that explosion creates some heavier elements that exist in the universe, such as copper and zinc.

The stars that came after the first generation, the second-generation stars like our Sun, contain these heavy elements. Since these elements can't exist purely from the nuclear fusion inside stars, they must have come from the supernovas.

Learn more about stars at https://brainly.com/question/12119289

#SPJ4

Before knowing, what is energy of electron, we should know how is energy added to electron if it goes to higher levels.

Atom jumps from a ground state to any excited state by taking the energy from its surroundings and this process is called absorption.

Electron absorbs the energy and jumps to the higher energy level.

Whereas in the reverse process, emission happens i.e. the electron returns to the ground state by releasing the extra energy which was absorbed while excitation.

Electron present in the first energy level, it must have exactly -13.6 eV of energy.

The formula to find out the energy of electron at nth orbit is mentioned in the figure.

To know more about electron:

brainly.com/question/1255220

#SPJ4

The mixture contains 250 mg of lactose as diluent.

Total mixture = 1.25 g

1x + 4x = 1.25 g

5x = 1.25g

x = 1.25 / 5

x = 0.25 g

lactose = 0.25 g = 250 milligram.

Thus in the mixture containing codeine sulfate, with lactose as an inert diluent, 250 mg of lactose is present.

To learn more about mixture click here:

https://brainly.com/question/6358654

#SPJ4

Entropy, from lowest to highest entropy will be CuO (s) < H₂O (l) < H₂O₂ (l) < H₂O (g) The highest entropy is in gases. This is due to the wide variety of microstates in which gases can reside.

Higher entropy is a result of more moles on the product side. When a reaction contains numerous phases, the generation of a gas often leads to a far greater increase in entropy than any increase in the number of moles of a liquid or solid.

The physical state with the lowest entropy is the solid state. Because entropy is a measure of unpredictability, this is the case. Molecules cannot move as easily in the solid state as they can in the liquid and gaseous phases.

To know more about Entropy visit:-

https://brainly.com/question/13146879

#SPJ4

question:

Arrange the following from lowest to highest entropy: H,0(), H,O2(0 H20(g), CuO(s). Assume 1 mole of each at the same conditions. from lowest to highest entropy Drag and drop your selection from the following list to complete the answer: H20(e) H20(g) CuO(s) H202(e)

The correct answer is option B.

The substrate that enters the citric acid cycle is called pyruvate.

What is citric acid cycle?

In Biology, Citric acid cycle is a series of multiple chemical reactions and is also called Krebs Cycle.

Generally, the cycle consists of eight exclusive steps including hydration, dehydration, redox, and decarboxylation reaction.

When cycle completes one turn one molecule of GTP or ATP is formed along with three molecules of NADH and 1 molecule of FADH2. Later on, these molecules are used in cellular respiration process.

To put it simply, citric acid cycle is a chemical reaction in which acetyl CoA is oxidized to release energy.

If you need to learn more about citric acid cycle click here:

https://brainly.com/question/14900762

#SPJ4

The liquid shown in 'b' need more thermal energy to change to a gas.

Thermal energy is defined as internal energy which is present in a system in state of the thermodynamic equilibrium depending on its temperature. Thermal energy can not be converted into useful work as much easily as the system energy which are not in states of the thermodynamic equilibrium.

As we can see that at same temperature in image 'a' the particle have high kinetic energy than the molecules of image 'b'. This can be shown that the boiling point of image 'a' is lower than the image 'b'. Therefore, at lower temperature it boils faster than the liquid 'b'. Thus we can say that liquid 'a' has less thermal energy than 'b'.

Thus, we concluded that the liquid shown in 'b' need more thermal energy to change to a gas.

learn more about thermal energy:

https://brainly.com/question/21389403

#SPJ13

Counting via way of means of Tens with numbers method 10, 20, 30, 40, 50, 60, 70, 80, ninety and so on.

Ask them to circle all of the tens, 10, 20, 30 . . . Ask the youngsters to have a take a observe the numbers they've rotated and notice down some thing they notice. For example, all of them result in zero, the tens pass up in ones. Ask the youngsters to remember out loud in tens, from 10 to 100.22.

When we remember via way of means of tens the price that we're growing various is via way of means of a unit of ten. That's why the tens column seems like it's far growing via way of means of one wide variety whenever while without a doubt it's far growing via way of means of one unit of ten.

Read more about counting;

https://brainly.com/question/10275154

#SPJ4

The key properties a solvent which needs to be suitable for use in recrystallization is that recrystallization solvent not react with the solid sample which taken as a sample for the purification.

Impure crystals can be purified by recrystallization with the help of suitable

solvent. This process is basically depends on two facts one is that most of the compounds are more soluble in the hot solvents as compared to cold ones, and impurities must have solubilities different from those of the given desired compound.

Three key properties of a good recrystallization solvent are as listed below:

. The recrystallization solvent not react with the solid sample which taken as a sample for the purification.

. The solvent must be inexpensive, volatile, and non-inflammable.

. The solvent either dissolve the impurities or not at all. If in case solvent dissolves the impurities which is present in a solid sample, then the impurities acts like that it is not present in the crystal structure of the solid. If in case solvent does not dissolve the impurities in it but dissolve the desired solid, then the impurities is easily removed by filtration techniques.

Thus, we concluded that the key properties a solvent which needs to be suitable for use in recrystallization is that recrystallization solvent not react with the solid sample which taken as a sample for the purification.

learn more about recrystallization:

https://brainly.com/question/14918321

#SPJ4

The molecular formula for the provided composition of different elements is C₆H₁₄N₄.

Every time a problem provides you with a compound's molar mass, you can use a little trick to help you determine the compound's molecular mass faster.

More specifically, instead of determining the empirical formula first, then using the molar mass to get the molecular formula, we can skip the empirical formula altogether.

As you know, a compound's molar mass tells we what the mass of one mole of that substance is. In this case, one mole of our compound has a mass of 142.00 g . This means that if we pick a sample of 142.00 g of this compound, w can use its percent composition to get the exact number of moles of each element you get per mole of compound.

So, we know that this compound's percent composition is as follows:

carbon ---> 50.7%

Hydogen ---> 9.9%

Nitrogen ---.> 39.4%

This means that it contains

142 g of compound × 50.7 g of carbon / 100 g of compound = 71.99 g of Carbon

142 g of compound × 9.9 g of hydrogen/ 100 g of compound = 14.05 g of hydrogen

142 g of compound × 39.4 g of nitrogen/ 100 g of compound = 55.94 g of nitrogen

Now all we have to use the molar masses of

hese three elements to determine how many moles of each we get in one mole of our compound.

For carbon (C) : 71.99 g × 1 mole of C / 12.01 g

= 5.99 ~ 6

For Hydrogen (H) : 14.05 g × 1 mole of H / 1.007g

= 13.95 ~ 14

For Nitrogen (N) : 55.94 g × 1 mole of N / 14.006 g

= 3.99 ~ 4

therefore, molecular formula of compound will be C₆H ₁₄N₄ .

To learn more about Molecular formula, refer:

https://brainly.com/question/13058832

#SPJ4

Since there are four groups encircling the sulfur atom, the electron geometry is tetrahedral ( 2 lone pairs and 2 hydrogens)

Tetrahedral electron geometry exists. The shape of molecules is warped.

Due to the lone pair repulsion of the S-H bonds, the molecular geometry of hydrogen sulfide I discovered to be bent (which I had not came across in uniform for some reason), and the angle will be significantly less than 109.5 degrees, about 92 degrees.

It would bend due to the two bonds and two unshared pairs in the center atoms. The atom would only need to be in two bonding areas to be considered linear.

To know more about hydrogen sulfide, h2s visit:-

https://brainly.com/question/19260293

#SPJ4

Because S waves do not pass through core, that's why scientists think the Earth's outer core is liquid.

Earth's interior is separated into a number of strata. The thickest layer underneath the crust, which makes up the surface, is the mantle. The core comes next. The inner core and the outer core are the two distinct portions of the core. The crust, mantle, outer core, and inner core of the Earth are all distinct layers.

The Earth's inner core is its deepest layer. It is solid and separate from the liquid outer core. The solid spheroid that makes up the Earth's inner core is composed primarily of iron and nickel but also contains other metals. In the inner core are siderophiles, or substances that dissolve in iron. These substances include platinum, cobalt, and gold.

To know more about   Earth's core visit : https://brainly.com/question/21212998

#SPJ9

The molar concentration of OH⁻ (aq) in the resulting solution is  0.28 M.

Molarity is a measure of the concentration of a chemical species, especially a solute, in solution and is expressed as the amount of substance per unit volume of solution. The most commonly used unit of molarity in chemistry is moles per liter using the SI unit symbols mol/L or mol/dm³.

For the given question:

Initial concentration of  KOH = M₁ (0.25 M)

Initial volume of KOH = V₁ (40.0 ml or 0.04 L)

Initial concentration of  KOH = M₂

Final volume of solution = V₂ (40.0 + 60.0 = 100ml or 0.1 L)

Since, M₁V₁ = M₂V₂

0.25 × 0.04 =  0.1 M₂

M₂ = 0.1 M

Final molar concentration of KOH is 0.1 M

KOH ⇄ K⁺ + OH⁻

As the moles of K⁺ and OH⁻ on dissociation is same as KOH, so the concentration of OH⁻ will be 0.1 M as well.

Now final concentration of Ba(OH)₂

M₁V₁ = M₂V₂

0.15 × 0.06 = 0.1 M₂

M₂ = 0.09 M

Final molar concentration of Ba(OH)₂ is 0.09 M

Ba(OH)₂ ⇄ Ba⁺ + 2OH⁻

As the above reaction indicates moles of OH⁻ are twice as that of  Ba(OH)₂. So, the molar concentration of OH⁻ will be twice the concentration of Ba(OH)₂, i.e. 2 × 0.09 = 0.18

Now the total molar concentration of OH⁻ will be:

= 0.1 + 0.18

= 0.28 M

To know more about molar concentration visit:

https://brainly.com/question/15532279

#SPJ4

The moles of potassium dichromate , K₂Cr₂O₇ are required to prepare a 250 mL solution of with a concentration of 2.16 M  is 0.54 mol.

given that :

molarity = 2.16 M

volume = 250 mL = 0.25 L

the molarity is given as :

molarity = number of moles / volumes in L

from this we can calculate the number of moles, we get :

number of moles of K₂Cr₂O₇ = molarity × volume

number of moles of K₂Cr₂O₇ = 2.16 × 0.25

number of moles of K₂Cr₂O₇ = 0.54 mol

Thus, The moles of potassium dichromate , K₂Cr₂O₇ are required to prepare a 250 mL solution of with a concentration of 2.16 M  is 0.54 mol.

To learn more about moles here

https://brainly.com/question/15209553

#SPJ4

Transfer RNA (tRNA) carries and places amino acids in the correct locations during protein synthesis.

The term "RNA" stands for ribonucleic acid, a complex substance with a high molecular weight that is used in the creation of proteins in cells and, in some viruses, takes the role of DNA (deoxyribonucleic acid) as a carrier of genetic information. The building blocks of RNA are ribose nucleotides, which are joined by phosphodiester linkages to form strands of various lengths.

Messenger RNA (mRNA), transfer RNA (tRNA), and ribosomal RNA (rRNA), which are found in all organisms, are the three most well-known and often investigated. Similar to enzymes, this and other varieties of RNA largely carry out biochemical processes. However, some also play intricate regulatory roles in cells. RNAs have significant roles in both healthy cellular processes and illnesses due to their engagement in several regulatory processes, their quantity, and their variety of functions.

To know more about transfer RNA, visit:

https://brainly.com/question/13798546

#SPJ4

The pH strength is measured by measuring pH using an indicator, hydrogen-electrode method, quin hydrogen-electrode method

The pH scale ranges from the scale of 0 to 14 in water. pH 7 is called as neutral state. Solution ranging the pH value from 0 to 7 comes under the acidic state.

The methods for measuring pH are categorized in five categories:

pH is represented by the following equation:

pH= -log[H⁺] where H⁺ is the concentration of H⁺ ion in the solution.

If a solution has lower pH value, then it is more acidic in nature.

pH value of normal water is  around 7.

pH value of sodium hydroxide is near to 14.

To know more about pH, visit here:

https://brainly.com/question/15289741

#SPJ4

Answer:

it would take longer to boil on top of a mountain because the water is not as hat

Answer:

hm provably and a couple of duty 2 and a couple

Explanation:

and one of the most important and most likely one of the rings was a little bit more of the first pack gives 99 of

The name of all functional groups in the molecule is carbonyl, alkyne group, thiol, and an amine group.

To learn more about functional group visit:

brainly.com/question/14618322

#SPJ1

The bond typically observed when a metal bonds to a nonmetal is the ionic bond the metal atom loses one or more valence electrons while the nonmetal gain electrons

Covalent bond form between nonmetal and ionic bond form between metal and nonmetal and metallic bond form between metal and ionic bonding involves the transfer of electron from a metal to the non metal atom until the outer shell of their resultant atoms are similar to that of a noble gas and the metal lose the electron and form cation while the nonmetal accept the electron and form anion and cation and anion are charged species which are formed by losing and gaining electron respectively to attain the nearest noble gas configuration or stability and usually metal lose their valence electron to form cation while non metal accept electron and form anion

Know more about metal

https://brainly.com/question/3211019

#SPJ4

The mass of plutonium that will remain after 1000 years if the initial amount is 5 g when the half life of plutonium-239 (239pu, pu-239) is 24,100 years is 2.5 g

The equation is Mr=Mi(1/2)^n

where n is the number of half-lives

Mr is the mass remaining after n half lives

Mi is the initial mass of the sample

To find n, the number of half-lives, divide the total time 1000 by the time of the half-life(24,100)

n=1000/24100=0.0414

So Mr=5x(1/2)^1=2.5 g

The mass remaining is 2.5 g

Learn more about half life at:

brainly.com/question/24710827

#SPJ4

The atomic number is the total number of protons of an atom, while the mass number is the total number of its protons and neutrons.

An atom has properties and masses that are unique to each other. With the discovery of the particles that make up the atom known as atomic number (Z) and mass number (A).

ᵃz X

A = mass number

Z = atomic number

X = element symbol

The atomic number (Z) indicates the number of protons (positive charge) or the number of electrons in the atom. This atomic number is a characteristic of an element. Because the atom is neutral, the number of protons equals the number of electrons, so the atomic number also indicates the number of electrons.

The mass number is usually given the symbol A. This mass number is used to determine the number of nucleons in an atom of an element. The nucleon itself is a particle that makes up the atomic nucleus consisting of protons and neutrons.

#SPJ4