Stereoisomers and constitutional isomers typically have the same connectivity but different spatial configurations. Although structural isomers share the same molecular formula, their atoms are bound differently. The atomic configurations and chemical formulae of the stereoisomers are identical.
What distinguishes structural and conformational isomers from one another?Two major groups of isomers are constitutional isomers and stereoisomers (molecules of the same chemical formula). Stereoisomers and constitutional isomers typically have the same connectivity but different spatial configurations.
Although structural isomers share the same molecular formula, their atoms are bound differently. The atomic configurations and chemical formulae of the stereoisomers are identical. Only the groups' spatial orientation within the molecule distinguishes them from one another.
Stereoisomers known as isomeric isomers are those that cannot be changed into one another by rotating a molecule around a single bond. Geometric isomers and optical isomers are the two different categories of these configurational isomers.
Cis-trans isomers are another name for geometric isomers. Alkanes tend to exhibit this form of isomerism more frequently than other alkanes.
When two identical groups (connected to the vinyl carbon atoms) are present, geometric isomerism refers to whether they are on the same side of the double bond or the other. It is referred to as the cis-isomer if the two identical groups are on the same side and as the trans-isomer if they are on opposite sides.
Learn more about geometric isomerism here:-
https://brainly.com/question/9988504
#SPJ4
In the reaction 4al _o2→2al2o3, what coefficient should be placed in front of the o2 to balance the reaction? responses 1 1 2 2 3 3 4
The coefficient 2 should be placed in front of H2O to balance the following reaction: 2H2 +O2 = 2H2O.
The equation is said to be balanced when each element has the same number of atoms on both sides of the equation. The use of coefficients allows for the balancing of chemical equations. To complete the number of atoms, an element is given a coefficient, which is a numerical value.
This is the answer: 2H2 + O2 Equals H2O.
To equalise the proportion of hydrogen and oxygen atoms, we utilise coefficient 2. Coefficient 2 should be placed in front of H2O to balance the following reaction: 2H2 +O2 = 2H2O.
A coefficient is an integer that is either multiplied by or listed next to the variable with which it is linked. In other terms, a coefficient is a term's numerical factor that contains both constants and variables. The coefficient in the phrase 2x, for instance, is 2.
Learn more about coefficient:
https://brainly.com/question/24881460
#SPJ4
What is the sequence of nitrogenous bases that pairs with adenine cytosine and guanine?.
Base pair of DNA. The chlorine bases adenine (A), thymine (T), and cytosine (C), as well as guanine (G), couple together under normal conditions.
Waste made of nitrogen is what?The waste products left over after protein metabolism are nitrogenous wastes. Urine is the primary way that nitrogen wastes are expelled combined with water. These wastes include ammonia, urea, uric acid, etc.
What is a nitrogenous example?Amides, amides, amines, imines, esters, objective, azo compounds, cyanates, imide, nitrates, ammonium nitrate, nitrogen compounds, and so on are examples of organic nitrogen. One of the primary constituent elements of amino acids, proteins, nucleic acids, and nitrogenous bases.
To know more about Nitrogenous visit:
https://brainly.com/question/16711904
#SPJ4
If 30. 0 l of oxygen gas is cooled from 473 k to 274 k at constant pressure, what is the new volume of oxygen ?.
The new volume of oxygen is 17.378 L.
Charles's law“If a gas is contained in a closed chamber with constant mass and pressure, then its volume is directly proportional to its absolute temperature"
The relationship between volume and absolute temperature in the Charles equation is directly proportional. That is, if the temperature increases, the volume also increases. Conversely, if the temperature decreases, the volume of gas also decreases.
Thus, the simplest Charles law equation can be expressed as:
K = V/T
With,
V = gas volume (m³)
T = absolute temperature (K)
k : constant
So, Charles' law equation can be written as:
V₁/T₁ = V₂/T₂
Where:
V₁ = initial volume of gas = 30 L
T₁ = initial temperature of gas = 473 K
V₂ = new volume of gas = ?
T₂ = new temperature of gas = 274
On putting all these values on the above equation, we get
V₂ = (30)(274) / 473 = 17.378 L
So, the new volume of oxygen is 17.378 L.
Learn more about new volume here: https://brainly.com/question/6839032#SPJ4
Name the process that occurs which causes the sugar to spread throughout the water.
The process of that causes the sugar to spread throughout the water is called solvation.
What is solvation?Solvation is the process by which solvent molecules surround and interact with dissolved ions or molecules. It simply refers to the interaction of a solute and a solvent. An important example of solvation is hydration where the solvent is water.
In general, the law of analogy applies to solvation is polar and non-polar nature of solute and solvent:
Polar solutes like sodium chloride are solvated by polar solvents such as water. They are not solvated by non-polar solvents such as benzene.Nonpolar solutes such as icosane are solvated by nonpolar solvents such as benzene. They are not solvated by polar solvents such as water.The soap molecules have polar and non-polar parts. Nonpolar moieties attract nonpolar molecules such as fats, while polar moieties allow them to be solvated by water. This combination of properties makes soapy water the perfect mixture for washing dirty dishes after eating.As sugars are polar solutes, hence they end up dissolved in polar solvents such as water.
To know more about solvation visit:
https://brainly.com/question/530845
#SPJ4
identify each material as a compound or a mixture. coffee is a solution of organic substances in water. mixture compound
The material as a compound or a mixture. coffee is a solution of organic substances in water is mixture.
Mixture can be defined as the combination of different substances and they can be separate by the different types methods. like salt water , salad is a mixture. coffee comes under the category of solution , a mixture and a homogenous mixture. A homogeneous mixture is defined as the mixture of substances that can be mixed thoroughly that cannot be seen as individual substance.
Thus, The material as a compound or a mixture. coffee is a solution of organic substances in water is mixture.
To learn more about mixture here
https://brainly.com/question/24898889
#SPJ4
Answer:
mixture for both
Explanation:
Place the following gases in order of increasing density at STP. N2 NH3 N2O4 Ar
Gases in ascending order of density at NH3, N2, Ar, and N2O4. When the temperature of a gas rises, its density rises as well..
What are the four different sorts of gases?By examining the four major gases you're monitoring for—oxygen (O2), carbon monoxide (CO), hydrogen sulfide (H2S), and methane (CH4)—a 4 gas monitor can help you protect your employees in any setting.
Is fog a gas?When there is more water vapor than the air can hold, clouds form. The water is what gives the cloud its visual appearance once the water vapour (gas) condenses to create minute water droplets (liquid). Due to their tiny size, these droplets float in the air.
To know more about gases visit:
https://brainly.com/question/18124975
#SPJ1
Write a balanced chemical equation that describes an acid-base reaction that would allow you to determine the moles of aspirin present in a sample.
A balanced equation representing the acid-base reaction that allows the calculation of the moles of aspirin in a sample is
[tex]C_{9} H_{8}O_{4} + NaOH[/tex]⇒ [tex]C_{9} H_{7}O_{4} Na+ H_{2} O[/tex]
Aspirin, also known as acetylsalicylic acid, is a nonsteroidal anti-inflammatory drug used to reduce pain, fever, and/or inflammation, and as an antithrombotic.
Aspirin is a benzoic acid with an ortho-substituted acylated alcohol function (actually a phenol). Therefore, two reactions can occur when aspirin and NaOH are combined: In fact, several aspirin formulations contain this ingredient.
Hence, A balanced equation representing the acid-base reaction that allows the calculation of the moles of aspirin in a sample is
[tex]C_{9} H_{8}O_{4} + NaOH[/tex]⇒ [tex]C_{9} H_{7}O_{4} Na+ H_{2} O[/tex]
To know more about Aspirin, here : brainly.com/question/23878261
#SPJ4
What are 2 similarities and 2 differences between ionic and covalent bonds?.
While ions in a covalent bond are shared evenly by the atoms, an ionic bond guidance and suggestions an electrons to the other atom involved in the bond.
In plain English, what is a covalent bond?When two atoms exchange an electron pair, they form an interatomic connection known as a covalent bond in chemistry. The electrical interaction of their protons for the identical electrons is what causes the binding.
What causes a covalent bond to form?A covalent bond is formed when two atoms exchange one or even more pairs of electrons. The two two atoms are concurrently drawing these electrons to them. When the difference in two atoms' electronegativities is too low for an electron transfer to happen, a covalent bond is created.
To know more about covalent bond visit :
https://brainly.com/question/10777799
#SPJ4
predict the charge that an ion formed from sulfur would have. question 21 options: a) 1- b) 2- c) 6 d) 4 e) 3-
The charge of the ion from the sulfur atom would have 2- ionic state.
Sulfides/sulfur ions are inorganic sulfur anions of the formula S2- or compounds containing one or more S2- ions. Solutions of sulfide salts are corrosive. Sulfides also refer to a large family of chemical compounds, inorganic and organic compounds. Lead sulfide and dimethyl sulfide. Hydrogen sulfide and disulfide are conjugate acids of sulfides.
However, the name sulfide is also used in IUPAC nomenclature for compositions that do not assume the type of bond involved. Examples of such names are selenium disulfide and titanium sulfide, which do not contain sulfide ions.
Learn more about the sulfur in
https://brainly.com/question/17432319
#SPJ4
if neither the volume nor the pressure of the system changes during the process, how is the change in internal energy related to the change in enthalpy
Change in enthalpy of the system is directly proportional to the change in internal energy.
What is enthalpy?
A thermodynamic system's enthalpy, which is one of its properties, is calculated by adding the system's internal energy to the product of its pressure and volume. It is a state function that is frequently used to monitor chemical, biological, and physical systems at a constant pressure that is conveniently given by the sizable surrounding environment. The energy necessary to determine the system's physical dimensions, or to make room for it by displacing its surrounds, is expressed by the pressure-volume phrase. Under typical conditions, the pressure-volume term is very small for solids and liquids and moderately small for gases.
The change in the enthalpy of the system during a chemical reaction is equal to the change in its internal energy plus the change in the product of the pressure times change in the volume of the system. Here it is given that change in pressure as well as change in volume is zero.Hence change in enthalpy of the system is directly proportional to the change in internal energy..
To know more about enthalpy change from the given link
https://brainly.com/question/14291557
#SPJ4
which of the following molecules contains an aldehyde? group of answer choices ch3coch3 ch3och3 ch3ch2oh ch3cho
The molecule that contains aldehyde group is : CH₃CHO.
An aldehyde is the organic compound containing CHO group at the end. In IUPAC naming the suffix used for the aldehyde group is al.
1) CH₃COCH₃ : This contain c double bond o group that is ketone group.
2) CH₃OCH₃ : The compound compound contain ether group.
3) CH₃CH₂OH : This compound contains the OH group called as alcohol group . the suffix used in alcohol is ol.
4) CH₃CHO : the compound contains CHO group at the end of the chain . this molecule contain aldehyde group.
Thus, The molecule that contains aldehyde group is : CH₃CHO.
To learn more about aldehyde group here
https://brainly.com/question/17101347
#SPJ4
Amplitude is the term used to describe the width of a wave.
True
Or
False
False, Amplitude is not the term used to describe the width of a wave.
Amplitude of a wave basically refers to the maximum amount of displacement of a particle on a medium from the position of its rest.
So we can say thar amplitude is nothing but the distance from the rest position to its crest of the wave. Amplitude can also be calculated from the trough position of the graph.
whereas the width of a wave is nothing but the distance between the highest surface part of the wave called crest to the lowest surface part of the wave called trough. So distance between a crest and a trough is actually the width of a wave.
So amplitude is not used to determine the width of the wave
To know more about amplitude
https://brainly.com/question/17043315
#SPJ1
Cobalt-60 is a radioisotope that decays by first order kinetics with a half life of 5. 26 years. When used in radiotherapy, a cobalt-60 unit is replaced when the concentration of co decreases to 75% of its initial value. When does this occur?.
After 2.18 years this radioactive outcomes occur.
For a first order reaction, we have the equation: [Co] = [Co]0 * 2-t/t1/2, where [Co]0 is the inital concentration of Co, [Co] is concentration at time t and t1/2 is half life
We are given [Co] = 75 % of [Co]0 = 75/100 * [Co]0
Pluggin this into the above equation:
75/100 * [Co]0 = [Co]0 * 2-t/5.26
Solving, t = 2.18 years
The capacity of some substances to spontaneously emit energy and subatomic particles is known as radioactivity. It is, in essence, a property of certain atomic nuclei. An unstable nucleus will spontaneously decay, or transform into a more stable structure, however this only occurs in a limited number of specific ways by ejecting certain particles or types of electromagnetic radiation. Radioactive decay is a property that many naturally occurring elements and their manufactured isotopes have.
The rate of radioactive element decay is measured by the half-life of an element, which is the period of time it takes for one-half of any given quantity of the isotope to decay. Half-lives for certain nuclei might range from greater than 1024 years to less than 1023 seconds.
To know more about radioactive visit : https://brainly.com/question/19637416
#SPJ4
0.222 g of a divalent metal is deposited when a current of 0.45 A is passed through a solution of its salt for 25 minutes. calculate the relative atomic mass of the metal
The weight of a metal deposited in electrolysis is related to its equivalent mass and current. The atomic mass of the metal is calculated as 31.45 g.
What is electrolysis?Electrolysis is the process of conversion of electrical energy into chemical energy by passing electrical current through an electrolyte accompanied by the reduction and deposition of a metal.
The weight w of metal deposited in cathode is related to the current I and the time t and the atomic mass a as follows:
w = a It /96500
Where 96500 C is called 1 faraday the charge required to deposit one mole of the metal.
Given w = 0.222 = a × 0.45 A × 25 × 60 s/ 96500
a = ( 0.22 × 96500) / (0.45 × 25 × 60)
= 31.45 g
Hence, the atomic weight of the metal is 31.45 g.
To find more on electrolysis, refer here:
https://brainly.com/question/12054569
#SPJ1
A piece of copper has a volume of 5.00 cm3. The density of copper is 8.96 g/cm3. What is the mass of the copper piece? mass = [ ? ] g Record your answer to the tenths place.
44.8 g is the mass of the copper piece
density= 8.96 g/cm3.
volume=5.00 cm3
density=mass/volume
mass=density × volume
mass= 8.96 g/cm3× 5.00 cm3
mass=44.8 g
The amount of matter that makes up an item is quantified by its mass. The kilogram (kg) is the fundamental unit of mass in the SI, and its initial definition was the mass of one liter of water at room temperature (the volume of a liquid changes slightly with temperature). The only SI base unit with a prefix is the kilogram.
Weight and mass are often used interchangeably. On the moon, the gravitational pull is roughly one-sixth as strong as it is on Earth. The weight of a given object will thus be six times greater on Earth than on the moon. Since mass only depends on the amount of matter in an object, it is location-independent.
To know more about mass visit : https://brainly.com/question/5661976
#SPJ1
Name 5 elements that we don't know what the state of matter is at room temperature.
Answer:
hydrogen, nitrogen, oxygen, fluorine, and chlorine
Explanation:
hydrogen (H, element 1), nitrogen (N, element 7), oxygen (O, element 8), fluorine (F, element 9), and chlorine (Cl, element 17) are all gases at room temperature, and are found as diatomic molecules (H2, N2, O2, F2, Cl2).
How does electron pair repulsion determine the molecular shape/molecule geometry?.
The repulsion of the electron pair surrounding the core atom has a significant impact on the geometry or shape of the electron.
How does the molecule shape indicate or are determined by electron pair repulsion?The tendency of the electron pairs in an atom to repel one another when they are present is known as electron pair repulsion.
The more repulsion there is between the electron pairs, the more the electrons want to organize themselves to lessen it.
Here, the issue of how electron pair repulsion affects molecule geometry is raised.
The fundamental explanation is that the molecule will change its structure to keep the repelling electron pair apart.
The electron pair repulsion also plays a significant role in determining molecular geometry, since molecules prefer to modify their form and geometry in response to the electron pair.
To know more about molecule visit:
brainly.com/question/19922822
#SPJ4
Calculate the amount (in mol ) in 8.80g of carbon dioxide CO2
Answer:
Molar Mass of CO2 = 12 + (16*2) = 44g/mol
8.80g CO2 x (1mol/44g) = 0.20mol
Explanation:
which of the following ions has the same ground-state electron configuration as the nearest noble gas?
group of answer choices
fe3+
pb4+
zn2+
zr2+
ce4+
Answer:
i think it might be zr2+ i may be wrong but lets try that
Explanation:
Mrs. Halpin's wedding ring has a total mass of 5.43 g. It is made of 5.26 g of gold and has 0.170 grams of diamonds on it. Assuming the gold ring is pure gold, what is the volume of her ring?
The density of gold is 19.3 g/mL.
The density of diamond is 3.51 g/mL
I got 0.321mL but I dont know if its right so could someone check it
Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. The total volume of ring is 0.31ml.
What is density?Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water
Mathematically,
Density = Mass ÷volume marked on the graduated cylinder
Density of gold =19.3 g/mL.
Mass of gold=5.26 g
Volume of gold= 5.26 g ÷ 19.3 g/mL.=0.27ml
Density of diamonds= 3.51 g/mL
Mass of diamonds=0.170 grams
Volume of diamonds= 0.170 g ÷ 3.51 g/mL.=0.27ml=0.04ml
Total volume =0.27ml+0.04ml=0.31ml
Therefore, the total volume of ring is 0.31ml.
To know more about density, here:
https://brainly.com/question/16894337
#SPJ1
The physical property of a substance that tells us how much energy is required to change the temperature of a substance by 1oc.
The specific heat capacity is the amount of heat required or absorbed to raise the temperature of a given substance by 1°C.
Heat capacityUsually denoted by a capital C, often with a subscription) is a measurable quantity that describes the amount of heat required to raise the temperature of a substance (object) by a certain amount (eg 1°C).
When calculating the amount of heat, what we calculate is the amount of heat transfer. Heat is an energy that moves from objects with a higher temperature to objects with a lower temperature.
The heat capacity formula is as follows,
C = Q : ∆T
C : Heat capacity (joules/°C).
Q : Heat (joules).
∆T : Change in temperature (C).
Learn more about heat capacity here: https://brainly.com/question/21406849#SPJ4
what alkane, with molecular formula c5h12 , forms only one monochlorinated product when it is heated with cl2 ?
The alkane with the molecular formula C₅H₁₂ , which forms the only one monochlorinated product when it is heated with Cl₂ is 2,2 dimethyl propane or neo-pentane.
The alkane with the molecular formula C₅H₁₂, forms only one monochlorination product is given as follows :
C(CH₃)₃- CH₃ + Cl₂ -----> C(CH₃)₃- CH₂ - Cl
2,2 dimethyl propane 2,2 dimethyl 1 chloro- propane
( neopentane)
thus, the 2,2 dimethyl 1 chloro- propane is formed when the neopentane or the 2,2 dimethyl propane with undergoes mono chlorination. in the mono chlorination the , in the alkane the one hydrogen atom is replaced by the chlorine atom,. this is the process of chlorination.
To learn more about monochlorination here
https://brainly.com/question/14016734
#SPJ4
Pls balance the equation!
Answer:
2NaCl + F₂ → 2NaF +Cl₂
What is the correct lewis electron-dot structure for the compound made of magnesium fluorine after forming an ionic bond?.
In the Lewis structure of MgF₂, each magnesium atom and each fluorine atom has two single bonds. Two fluorine atoms flank the magnesium atom. There are no lone pairs present on magnesium ion however there are three lone pairs on each of the fluorine atoms.
What is lewis electron-dot structure?Each element has a certain number of electrons in its atomic orbitals. Of these electrons, only those involved in bond formation with other atoms are present in the outermost shell of the atom. These electrons in the outermost orbital of the atom are called valence electrons.
MgF₂ is an ionic compound consisting of a magnesium cation and a fluoride anion. To draw the electron dot or Lewis diagram of this compound, you must first draw the electron configuration of the atoms.
Electronic configurations:
Mg : 1s²2s²2p⁶3s²
F : 1s²2s²2p⁵
By donating two electrons, magnesium has a full octet in its outer shell, and fluorine lacks only one electron to complete its octet, so two fluorine atoms bond with magnesium. Forms stable MgF₂ compounds. Thus an ionic bond is formed.
To know more about lewis electron-dot structure visit:
https://brainly.com/question/7242210
#SPJ4
if both nadph and ribose-5-p are needed which of the following best represents the net reaction of the pentose phosphate pathway?
While NADPH is necessary for the synthesis of several organic compounds, ribose 5 phosphate is required for the synthesis of nucleic acid. The whole oxidation of glucose happens in the cytosol via the pentose phosphate route, which generates NADPH and CO2 but not ATP.
Are biosynthetic reactions dependent on ribose-5-P?
If ribose-5-P is not required for biosynthetic processes but NADPH is.
What results from the reaction of ribulose with glucose-6-phosphate?
In this process, a single molecule of glucose-6-phosphate breaks down into two molecules of NADPH and one molecule of ribulose-5-phosphate in the presence of a water molecule and NADP+.
To know more about Pentose Phosphate visit:-
brainly.com/question/13264777
#SPJ4
Ribulose 5-phosphate - 2 NADPH + 2 H+ + CO Glucose 6-phosphate - 2 NADP+ + H2O is the overall result for this process.
What metabolic processes occur all along pentose phosphate pathway?Here are the eight responses: NADPH is produced via the following reactions: reaction 1 transforms sugar 6-phosphate into D-glucono-1,5-lactone 6-phosphate; reaction 2 creates 6-phospho-D-gluconate; reaction 3 creates ribulose 5-phosphate; and reaction 4.
What does the name "pentose phosphate pathway" mean?The five-carbon sugar ribose is referred to as pentose, while nicotinamide adenine phosphate, or NADPH, is referred to as phosphate in the name of the pentose phosphate pathway.
To know more about nicotinamide visit:
https://brainly.in/question/6103440
#SPJ4
Photosynthesis is a chemical reaction what form of energy does it use
Why is it important not to leave fingerprints or scratch the sample cells in spectrophotometric measurements?.
The amount of light that reaches the detector can be reduced by scuffs and fingerprints on the surface of the cell. Your results won't be correct if this happens.
To measure the concentration of a particular solution precisely, this equipment requires cautious usage. If certain preparatory processes weren't followed, the wavelength could be off.
Always use a lint-free cloth to clean or manipulate the cuvette, and be careful to wipe out any water that may have accidentally dropped inside.
Although each fingerprint is unique, they all fall into one of three main categories: the whorl, which resembles a spiral, the loop, which resembles a teardrop, and the arch, which resembles a cross-section of a hill.
Learn more about fingerprints:
https://brainly.com/question/11165604
#SPJ4
Methyl orange might be selected as an indicator for the titration of a weak base with a strong acid. Can you estimate the ph at the equivalence point?.
Yes. The pH of 3.7 should be the equivalency point.
Methyl orange is employed as a strong acid and weak base indication for what reason?Methyl orange transforms from a basic to an acidic color during a strong acid weak base titration, making it a useful chemical indicator. In acidic and basic media, respectively, methyl orange exhibits red and yellow colors. In titration, the solution appears yellow at first because the pH is high.
Methyl orange is a frequently used pH indicator in titrations because of its easy-to-see color shift. Because it changes color at a weak acid's pH, it is frequently employed in acid titrations. Methyl orange turns red in an acidic medium while turning yellow in a basic one.
To know more about indicator visit:
https://brainly.com/question/29359841
#SPJ4
an aqueous solution contains 0.22 m sodium fluoride. one liter of this solution could be converted into a buffer by the addition of:
One liter of this solution could be converted into a buffer by the addition of 0.25 mol of NH3 and 0.13 mol of KOH.
What is aqueous solution and what needs to be added in one litre of this solution to convert it into buffer?The solution in which the solvent is basically water is called aqueous solution and sugar solution is one such example.Here is given the 0.22 molal sodium fluoride in an aqueous solution , and one liter of this solution needs to be converted to buffer.Basically aqueous in a solution indicates that the substance in the solution is dispersed in water.0.25 mol of NH3 and 0.13 mol of KOH needs to be added to an aqueous solution containing 0.22 molal sodium fluoride.Hence 0.25 mol of NH3 and 0.13 mol of KOH needs to be added to convert into buffer .To know more about solution visit:
https://brainly.com/question/1616939
#SPJ4
1. Given the formula of a substance:
H
HH
NE
C=C-C=C
7
H
H
H
What is the total number of shared electrons in a molecule of this substance?
A) 22
B) 11
C) 9
D) 6
A molecular formula is a chemical formula for a molecular compound that shows the types and numbers of atoms in the compound's molecule. Ammonia is a nitrogen-hydrogen compound.
What is the total number of shared electrons in this substance's molecule?The total number of shared electrons in a molecule is 22.
Ionic and covalent compounds are the two types of compounds. Molecules are the most basic unit of a covalent compound, and they can be represented in a variety of ways.
Atoms are the smallest units of matter that retain an element's fundamental chemical properties. However, much of the study of chemistry is concerned with what happens when atoms combine to form compounds. A compound is a unique collection of atoms held together by chemical bonds.
The electrostatic attraction between the positively charged nucleus and the negatively charged electrons surrounding it holds the structure of the atom together, and the stability within chemical bonds is also due to electrostatic attractions. Consider the two most common types of chemical bonds: covalent bonds and ionic bonds. Two atoms share pairs of electrons in covalent bonds, whereas electrons are fully transferred between two atoms in ionic bonds.
To learn more about electrons substance's molecule refer to:https://brainly.com/question/17922826
#SPJ1
