What is the difference between the solar system, the galaxy, and the universe? (select all that apply.)

The   increase  by a factor of 2 is sufficient to change the applied voltage in a circuit if we  want to increase the power by a factor of 4 by keeping the resistance constant.

Simple formula is:

Voltage (V) = Current (I) X Resistance (R)

Thu if R is constant and V is increased I will reduce

Thus assuming a constant Resistance , increasing the Voltage will reduce the current in the circuit.

Applied voltage :

Voltage applied to a circuit is equal to the sum of the individual voltage drops. The drop across a resistor in a series circuit is directly proportional to the size of the resistor. If the circuit is broken at any point, no current will flow.

What happens when voltage is applied to a resistor?

Therefore, if the voltage is increased, the present will increase provided the resistance of the circuit does not change. Similarly, increasing the resistance of the circuit will lower the present flow if the voltage is not changed

Why is voltage applied?

When a voltage is applied, it's energetically preferable for an electric charge to move towards the point of lowest voltage in the wire; that's a fancy way of saying that a positive electric charge gains energy when going from a point of high voltage to a point of low voltage.

Learn more about flow of current in a circuit :

brainly.com/question/18108586

#SPJ4

The tall would be 2 x [tex]10^{-6}[/tex] m

Given

Use D1 and D2 to represent the old and new diameters.

D1 =  2 x [tex]10^{-8}[/tex]

D2 = 1cm

To determine how tall you'd be, we need to divide D2 by D1:

Ratio = [tex]\frac{D2}{D1}[/tex]

Substitute values for D2 and D1

Ratio = [tex]\frac{2*10^{-8} }{1cm}[/tex]

Convert cm to m

Ratio = [tex]\frac{2*10^{-8} }{0.01}[/tex]

Convert denominator to exponents

Ratio = [tex]\frac{2*10^{-8} }{10^{-2} }[/tex]

Apply the Law of indices

Ratio = [tex]2*10^{-8} *10^{2}[/tex]

Ratio = [tex]2*10^{-8+2}[/tex]

Ratio = [tex]2*10^{-6}[/tex]

Therefore [tex]2*10^{-6}[/tex]m time falls.

To learn more about average diameter tall, refer

to https://brainly.com/question/25573309

#SPJ4

By the half-life of radioactive, the decay constant is 0.144 /s.

We need to know about the half-life of the radioactive elements to solve this problem. The radioactive element will decay over time and follow the equation

N = No(1/2)^(t/t'')

λ = ln2 / t''

where N is the final quantity, No is the initial quantity, λ is the decaying constant, t is time and t'' is the half-life of a radioactive element.

From the question above, we know that

t = 18.3 s

No = 175 kbq

N = 12.4 kbq

Calculate the half-life

N = No(1/2)^(t/t'')

12.4 = 175(1/2)^(18.3/t'')

(1/2)^(18.3/t'') = 62/875

18.3/t'' = ⁰'⁵log(62/875)

18.3/t'' = 3.82

t'' = 4.79 seconds

Determine the decay constant

λ = ln2 / t''

λ = ln2 / 4.79

λ = 0.144 /s

Find more on half-life at: https://brainly.com/question/25750315

#SPJ4

The current drawn by the load is 9.17 A.

Current can be defined as the rate of flow of electric charge round a circuit.

To calculate the current drawn by the load, we use the formula below.

Formula:

Where:

From the question,

Given:

Susbtitute these values into equation 1

Hence, the current drawn by the load is 9.17 A.

Learn more about current here: https://brainly.com/question/24858512

#SPJ1

Answer:

[tex]0.70\; {\rm kg}[/tex].

Explanation:

If an object of mass [tex]m[/tex] is travelling at a velocity of [tex]v[/tex], the momentum [tex]p[/tex] of that object would be [tex]p = m\, v[/tex].

In this question, both momentum [tex]p[/tex] and velocity [tex]v[/tex] are given, and mass [tex]m[/tex] needs to be found. Hence, rearrange the equation [tex]p = m\, v[/tex] and solve for [tex]m\![/tex]:

[tex]\begin{aligned} m &= \frac{p}{v} \\ &= \frac{3.22\; {\rm kg \cdot m \cdot s^{-1}}}{4.6\; {\rm m\cdot s^{-1}}} \\ &= 0.70\; {\rm kg}\end{aligned}[/tex].

Therefore, the mass of this ball would be [tex]0.70\; {\rm kg}[/tex].

Quiet inspiration will increase thoracic and lung volume and decrease intrapulmonary pressure.

Boyle's Law is the law that determines the relationship of the pressure of a gas with respect to the volume of the container. Here the pressure of gas exists as inversely proportional to the volume of the particular container.

This is one of the major principles which is important for understanding various processes of events occurring during pulmonary ventilation. If there is an increase in the volume of a container takes place, the pressure will gradually decrease.

Quiet inspiration will result in increasing thoracic as well as lung volume and is likely to decrease intrapulmonary pressure. Since the inspiratory muscles get contract to increase the thoracic cavity volume as this will cause an increased volume of the lungs as well. Then gradually there will be an increase in the volume of the lungs that lowers the intrapulmonary pressure which exists below atmospheric pressure.

Learn to know more about the inspiration and expiration of Quiet breathing at

https://brainly.com/question/14038944

#SPJ4

It is false. The period of a pendulum clock increases if you increase the length of the pendulum.

The time period of a pendulum clock is directly proportional to the square root of the length.

The formula of the time period of a simple pendulum is:

                                       T = 2π√(l/g)

According to the formula, time period T is directly proportional to the square root of length and inversely proportional to gravity. The time period will increase if we increase the length of the pendulum clock.

For example, the time period will increase by two times if we increase the length of the pendulum by four times.

If you need to learn more about simple pendulum, click here

https://brainly.com/question/2292218?referrer=searchResults

#SPJ4

False, the period of a pendulum clock does not decreases if you increase the length of the pendulum. Their variation is directly proportional.

The square root of the length of a simple pendulum determines its period in a direct proportion. In other words, as length grows, so does the amount of time.

The relationship between two values where their ratio equals a constant number is known as a direct proportion or direct variation. In our case, the two values are.

1. Square root of the length of the pendulum

2. Period of a pendulum

follow the link below to understand more about a pendulum

https://brainly.in/question/44843741

#SPJ4

By using sonar echo, the depth of the sea is 222 m.

We need to know about the sonar echo to solve this problem. Sonar detection sends the sound wave through a medium to detect an object. The sound wave needs to travel from the transmitter to the object and then come back to the receiver. It can be determined by

v = 2.s / t

where v is the speed of sound, s is the distance and t is the time interval sound wave released until received.

From the question above, we know that

t = 0.3 s

v = 1480 m/s

By substituting the given parameters, we get

v = 2.s / t

1480 = 2 . s / 0.3

s = 740 . 0.3

s = 222 m

Find more on sonar echo at: https://brainly.com/question/14090821

#SPJ4

By using the torque, the shear stress is 2.36 lb/ft².

We need to know about torque to solve this problem. Torque is the rotational equivalent of linear force. It can be determined as

τ = F x r

where τ is torque, F is perpendicular force and r is radius.

Shear stress can be calculated by torque

P = F / A

P = τ / (π.r³)

where P is shear stress, r is the radius.

From the question above, the parameter given are

τ = 200 ft.lb

d = 6 ft

Find the radius

r = 1/2 . d

r = 3 ft

Find the shear stress

P = τ / (π.r³)

P = 200 / (π.3³)

P = 2.36 lb/ft²

Find more on torque at: https://brainly.com/question/14839816

#SPJ4

The peak (+ve half) and trough (-ve half) portions of the waveform signal flatten out or are "Clipped-off" when the input amplitude is too high, forcing the output waveform signal to exceed the power supply voltage rails.

Over the whole auditory range of frequencies from 20 Hz to 20 kHz, the majority of contemporary audio amplifiers exhibit the same flat frequency response as seen above. The Bandwidth (BW) of an audio amplifier, which is mostly influenced by the circuit's frequency response, is the range of frequencies it can handle. The power in the high frequency band, from 8 to 24 Hz, divided by the power in the low frequency band, from 3 to 5 Hz, is known as the frequency ratio.

Learn more about Frequency here-

https://brainly.com/question/5102661

#SPJ4

The friction force applied to the block performs nonconservative work

on the system.

The formula of the friction force F = μN

where,

F = friction force

μ = coefficient of friction

N = normal force

To learn more about friction force, refer

to https://brainly.com/question/26117248

#SPJ4

A plane traveling north at 200 m/s turns and then travels south at 200 m/s. the change in its velocity is 400 m/s in the south direction.

A particle or object's movement with respect to time is expressed vectorially as velocity.

The meter per second (m/s), usually referred to as speed, is the accepted unit of velocity magnitude.

As an alternative, the velocity magnitude can be expressed in centimeters per second (cm/s).

The rate of something moving in a specific direction is called its velocity. Using an automobile driving north on a highway as an example, or a rocket after it has launched, as an example of speed.

Scalar implies that the velocity vector's absolute value magnitude will always equal the motion's speed.

ΔV = V1 - V2

ΔV = 200 - (-200)

ΔV = 200+200 = 400 m/s

To learn more about velocity, refer

https://brainly.com/question/19108024

#SPJ4

Answer:

E = - dΦ / dt

(b) would be the correct answer

According to photoelectric effect, the threshold frequency of metal is 1.42 x 10¹⁵ Hz.

We need to know about the photoelectric effect to solve this problem. The photoelectric effect is electron ejected from metal because of light source. The kinetic energy of the ejected electron is

K = h(f - fo)

where K is kinetic energy, h is Max Planck constant (6.6 x 10¯³⁴ Js), f is the frequency of light source and fo is the threshold frequency of the metal.

From the question above, we know that

λ = 200 nm = 200 x 10¯⁹ m

v = 3.4 x 10⁵ m/s

me = 9.1 × 10¯³¹ kg

Find the frequency of light source

f = c / λ

f = 3 x 10⁸ / (200 x 10¯⁹)

f = 1.5 x 10¹⁵ Hz

Find the threshold frequency

K = h(f - fo)

1/2 . me .v² = 6.6 x 10¯³⁴ (1.5 x 10¹⁵ - fo)

1/2 . 9.1 × 10¯³¹ . (3.4 x 10⁵)² = 9.9 x 10¯¹⁹ - 6.6 x 10¯³⁴fo

9.9 x 10¯¹⁹ - 6.6 x 10¯³⁴fo = 5.26 x 10¯²⁰

6.6 x 10¯³⁴fo = 9.37 x 10¯¹⁹

fo = 1.42 x 10¹⁵ Hz

Find more on photoelectric effect at: https://brainly.com/question/1408276

#SPJ4

Answer:

rotation is a day and revolution is 365 days

The minimum initial velocity u = 58.3°

(v0) min = 9.76 m/s

Coordinate System: The coordinate system will be set so that its origin coincides with the ball’s initial position.

x-Motion: Here (v0) = v0 cos u x0 and x = 6 m Thus,                

 (+)     x = [tex]x_{0}[/tex] + (v0)xt

           6 = 0 + (v0 cos u)t

           t = 6/v0 cos u                                       (1)          

y-Motion: Here (v0)x = v0 sin u, ay = -g = -9.81m/s  and y0 = 0  

   ( A + c B)    y = y0 + (v0)y t +1/2 [tex]a_{y}[/tex][tex]t^{2}[/tex]

                      3 = 0 + v0 (sin u)t + 1/2 (-9.81) [tex]t^{2}[/tex]

                       3 = v0 (sin u)t - 4.905[tex]t^{2}[/tex]               (2)

Substituting Eq. (1) into Eq.(2) yields

        v0 = [tex]\sqrt[2]{\frac{58.86}{sin 2u - cos2 u} }[/tex]                                       (3)

From Eq. (3), we notice that is minimum when is

maximum. This requires [tex]\frac{df(u)}{du}[/tex]

[tex]\frac{df(u)}{du}[/tex] = 2 cos2u + sin2u = 0

tan2u = -2

2u = 116.57°

u = 58.28° = 58.3°

Substituting the result into Eq.(2), we have

(v0)min = [tex]\sqrt[2]{\frac{58.86}{sin 116.57° - cos2 58.28°} }[/tex]

(v0)min =  9.76 m/s

To learn more about minimum velocity, refer

to https://brainly.com/question/26117248

#SPJ4

Answer:

UN balanced force to applied on that object

True. If E=0, at all points of a closed surface that means there is no electric field present. Therefore, electric flux should also be zero.

This leads us to the Gauss's Law, which says that the electrical flux going through a closed surface, is that the sum of all charges Q inside that closed surface, divided by permittivity of free space E₀. If that flux is zero, meaning there is no net charge inside the shape.

The net flux through a closed surface is a quantitative measure of the net charge inside a closed surface. 2. the web electric flux through any closed surface surrounding a net charge 'q' is independent of the shape of the surface.

The flux of an electrical field through a closed surface will be always zero if and only if there is no net charge in the volume enclosed by the surface. the quantity of electric flux is always proportional to the charges inside the surface

Learn more about electric flux :

brainly.com/question/26289097

#SPJ4

As an object's mass increases, the gravitational force grows (also called the gravity force). The gravitational force rapidly decreases as the distance between masses increases.

Greater gravitational forces will be used to attract heavier objects because the gravitational force is directly proportional to the mass of both interacting objects. Therefore, the gravitational attraction between two objects grows as their respective masses do as well.

The masses of the two objects and their separation from one another will determine how much gravitational force there is between them. Each object's mass and gravitational force are inversely proportional. This implies that an object's gravitational force increases with mass.

To know more about gravitational forces :

https://brainly.com/question/12528243

#SPJ9

Answer: Block A - 19.3

Block B - 0.64

Block C - 0.70

Block D - 0.917

Block E - 3.53

Explanation: i hope this helps you a little

2Q charge should it have on its plates.

The electric field between plates is the area or space where the plates' charge influences can be seen.

For example, if a charged particle is placed near any charged plate, the plate exerts an electric force to attract or repel the charged particle.

Either positive or negative charges are present in charged particles.

Since electrons are always negatively charged, a negatively charged particle carries more electrons (negative charges) than protons (positive charges).

Therefore, there must be fewer electrons than protons in order for charged particles to be positive.

A plate becomes positively or negatively charged when charged particles are placed on it, and a charged plate generates an electric field all around it.

Gauss's law is shaped by the surface.

Calculating the area of shapes with a defined geometry is simple.

The Gauss's law equation can be written as the surface charge density divided by the medium's electric permittivity in the case of a sphere or rectangular plate.

To learn more about electric charge, refer

to https://brainly.com/question/26117248

#SPJ4

The molarity of the solution is 0.0293 m. 1.928 g of kno3 are dissolved in 651 ml of water.

The amount of a substance in a solution stated as an amount of substance per unit volume of solution is known as molar concentration, also known as molarity, quantity concentration, or substance concentration. The most common unit used in chemistry to express molarity is the number of moles per liter, represented by the unit sign mol/L or mol/dm3 in SI units. One molar, or 1 M, of a solution is defined as one mol/L.

The use of molar concentration in thermodynamics is typically not applicable because the volumes of most solutions very minimally change with temperature due to thermal expansion.

Learn more about molarity here-

https://brainly.com/question/8732513

#SPJ4

The average velocity of the ball is 1.14 m/s.

Since there is no height given, we can assume that the ball was rolling on a non-inclined surface.

Distance covered by the ball = 18 meters

Time taken by the ball = 15.7 seconds

The velocity of the ball = Distance / Time taken

Velocity= 18/15.7

Velocity= 1.14 m/s

and since there is no initial velocity given, it is the average velocity of the ball.

The distance traveled divided by the time passed is the definition of an object's average speed. Average velocity can be calculated as the displacement divided by the time. Velocity is a vector quantity. The straight line average velocity formulae are invalid for broad scenarios involving non-constant acceleration, hence this definition must be used directly.

To learn more about average velocity please visit-
https://brainly.com/question/862972
#SPJ9

Answer:

They are maintaining tension with an equal force on all sides.

Fez engages in team activities such as running or passing the ball, then muscles maintain tension with an equal force on all sides. Hence, option B is correct.

Exercise is the training of the body to increase fitness and function.

Although the phrases physical activity and exercise are sometimes used synonymously, this article will make a distinction between the two. Physical activity is a broad phrase that refers to any energy expenditure caused by skeletal muscle action. As a result, it encompasses the full range of activity, from deficient resting levels to maximal exertion. Physical activity includes exercise.

Exercise stands apart because it is a systematic activity designed with physical fitness development and maintenance in mind. Physical fitness growth through the body's and its various systems' adaptation to a workout regimen is referred to as physical conditioning.

To know more about Exercise :

https://brainly.com/question/13128077

#SPJ2

The beam used is a negatively charged electron beam with a velocity of

v = E / B where E is the electric field and B is a magnetic field.

Now indicates that the electric field and the magnetic field are contracted and that the beam passes without deviating, so the electric and magnetic forces must be balanced

        Fe = Fm

        q * E = q * v * B

        v = E / B

this configuration is called speed selector.

The beam used is a negatively charged electron beam with a velocity of v = E / B.

For more information on magnets click on the link below:

https://brainly.com/question/14997726

#SPJ4

Although part of the question is missing the complete question is A depiction of a famous scientific experiment is given. Consider how the beam changes when the magnet is off compared to when the magnet is on. A bell-shaped evacuated glass tube with a narrow end and a wide end is connected to a battery at the narrow end. In the center of the tube there is a negatively charged plate above the tube, a positively charged plate below the tube, and a magnet with the field turned off. A beam originating at the narrow end of the tube travels toward the wide end of the tube. With the magnetic field turned off, the beam path bends toward the positively charged plate and ends at the lower half of the wide end of the tube. A bell-shaped evacuated glass tube with a narrow end and a wide end is connected to a battery at the narrow end. In the center of the tube there is a negatively charged plate above the tube, a positively charged plate below the tube, and a magnet with the field turned n. A beam originating at the narrow end of the tube travels toward the wide end of the tube. With the magnetic field turned on, the beam path travels in a straight path to the center of the wide end of the tube. What type of beam was used in this experiment?

Individual characteristics are demonstrated by the unique pattern of bullets fired from every gun model

There are two types of characteristics. They are class characteristics and individual characteristics. Class characteristics helps to place an evidence into a group of objects whereas individual characteristics narrows down the evidence to a particular object.

For example, a type of blood group is a class characteristic because it belongs to a group of humans. But DNA taken from the blood is a individual characteristic because it belongs to only one human on the entire planet.

Therefore, Individual characteristics are demonstrated by the unique pattern of bullets fired from every gun model

To know more about Individual characteristics

https://brainly.com/question/11610795

#SPJ1

Social media is the example of an external communication.

The procedures in charge of communicating with individuals and groups outside of your organization are known as external communications. Customers, companies, suppliers, partners, investors, government organizations, and law enforcement are a few of these.

Email, brochures, newsletters, posters, advertisements, and other types of multi-media marketing are common examples of external communication that are used to entice clients, partners, and suppliers to engage in profitable business dealings.

External communications' main objective is to convey to the public an important message about the organization's efforts and level of excellence. An aspect of communication that organizations cannot directly control is informal external communication.

To know more about Social media :

https://brainly.com/question/24687421

#SPJ1