What is the effect of erosion?

A. New land forms at the mouth of a river.
B. New land forms at the top of a mountain.
C. A mountain forms.
D. A fossil is created.

Answer:

The axis of rotation of the Earth is tilted at an angle of 23.5 degrees away from vertical, perpendicular to the plane of our planet's orbit around the sun. The tilt of the Earth's axis is important, in that it governs the warming strength of the sun's energy.

Explanation:

can i get brainliest

Answer:

B. The light bulb shines brighter and the power increases.

Explanation:

Power is the product of voltage and current . Increasing the current at a constant voltage will increase the power.

Increasing the power means more heat and therefore more light must be emitted.

Answer:

Moment of a force is the product of the force and the perpendicular distance of force from axis of rotation.

The SI unit of force is newton (N).

Explanation:

Hope it helps you again!

Answer:

Explanation:

resultant could have magnitude 4 - 2 ≤ V ≤ 4 + 2 or 2 ≤ V ≤ 6

If θ is the angle of the 4 unit vector, the resultant could have angle φ in the range of

φ = θ ± arcsin (2/4)

θ - 30° ≤ φ ≤ θ + 30°

The possible resultant of a 2-unit vector and 4-unit vector is 6 and 2.

If the magnitude of vector is 1, then it can be the Unit vector.

In the Unit vector, x axis will have the vector of i, y axis will have the vector j, z axis will have the vector k.

When two vectors are in same direction then we add up to get their resultant and in this case resultant would be maximum

R = A + B

R = 4 + 2

R = 6

If vectors are in opposite direction then they provide minimum resultant and in this case we subtract them

R = A - B

R = 4 - 2

R = 2

Thus, the possible resultant are 6 and 2.

Learn more about Possible resultant,

https://brainly.com/question/10655545

#SPJ2

Explanation:

I'm not sure, but I would go for the more than A since its orbital speed is at its fastest and the sweep occurs in about the same period of days.

Answer:

3.9m/s² is the acceleration

The acceleration of the object is 3.9m/s².

Acceleration (a) is the change in velocity (Δv) over the change in time (Δt), represented by the equation a = Δv/Δt. This allows you to measure how fast velocity changes in meters per second squared (m/s^2).

When you fall off a bridge. The car turning at the corner is an example of acceleration because the direction is changing. The quicker the turns, the greater the acceleration.

Learn more about the acceleration of the object at

https://brainly.com/question/605631

#SPJ2

Answer:

Newton's second law states that .

Formulically

F=Force

m=mass

a=acceleration

The best example is hitting a tennis ball.

The characteristics of the scalar product allows to find the angle between the two vectors is:

The scalar product is the product between two vectors whose result is a scalar.

            A . B = |A|  |B| cos θ

Where A and B are the vectors, |A| and |B| are the modules of the vectors and θ at the angle between them.

The vector is given in Cartesian coordinates and the unit vectors in these coordinates are perpendicular.

            i.i = j.j = 1

            i.j = 0

            A . B = (4 i - 4j). * -5 i + 7j)

            A . B = - 4 5 - 4 7

            A. B = -48

We look for the modulus of each vector.

           |A| = [tex]\sqrt{x^2 +y^2 }[/tex]

           |A| = [tex]\sqrt{4^2 + 4^2}[/tex]  

           |A| = 4 √2

          |B| = [tex]\sqrt{5^2 +7^2}[/tex]

          |B| = 8.60

We substitute.

            -48 = 4√2  8.60  cos θ

            -48 = 48.66 cos θ

            θ = cos⁻¹   [tex]\frac{-48}{48.664}[/tex]  

            θ = 170º

In conclusion using the dot product we can find the angle between the two vectors is:

Learn more about the scalar product here:  brainly.com/question/1550649

Answer:

well for C the horse is at rest at 10 to 15

D is 0 to 10

E is 15 to 25

Explanation:

If you search up examples it will help with this worksheet.

If I am work then I appologize

The increase in temperature of the metal hammer is 0.028 ⁰C.

The given parameters:

The increase in temperature of the metal hammer is calculated as follows;

[tex]Q = K.E\\\\mc \Delta T = \frac{1}{2} mv^2\\\\\Delta T = \frac{v^2}{2 c}[/tex]

where;

c is the specific heat capacity of the metal hammer

Assuming the metal hammer is iron, c = 450 J/kg⁰C

[tex]\Delta T = \frac{5^2}{2 \times 450} \\\\\Delta T = 0.028 \ ^0C[/tex]

Thus, the increase in temperature of the metal hammer is 0.028 ⁰C.

Learn more about heat capacity here: https://brainly.com/question/16559442

Answer:

Explanation:

Assuming x direction is horizontal any y direction is vertical

As the moment of inertia of the pulley is I = (½)mR²

The pulley mass will appear as ½ its actual mass in the system.

F = ma

5.00(9.81) = (5.00 + 2.60/2 + 12.0)a

a =  49.05 / 18.3

a = 2.6803278...

a = 2.68 m/s²

A) T = 12.0(2.68) = 32.16... = 32.2 N

B) T = 5.00(9.81 - 2.68) = 35.65 = 35.7 N

C) aₓ = 2.68 m/s²

D) Fx = 32.2 N

   Fy = 35.7 + 2.60(9.81) = 61.2 N

A)The tension in the horizontal segment of the wire will be  32.2 N

B)The tension in the vertical segment of the wire will be 35.7 N

Acceleration is defined as the rate of change of the velocity of the body. Its unit is m/sec².It is a vector quantity. It requires both magnitudes as well as direction to define.

The given data in the problem is;

m is the mass box resting on a horizontal  =12.0 kg

the uniform solid disk of mass of 2.60 kg

d is the diameter = 0.500 m.

A)The tension in the horizontal segment of the wire will be  32.2 N

The acceleration is found as;

[tex]\rm F = ma \\\\ a= \frac{49.05}{18.3} \\\\ \rm a= 2.68 \ m/sec^2[/tex]

The tension in the horizontal segment of the wire is found as;

T=ma

T= 12.0 ×2.68

T=32.2 N

Hence the tension in the horizontal segment of the wire will be  32.2 N

B)The tension in the vertical segment of the wire will be 35.7 N

T=m(g-a )

T= 5.00 × (9.8-2.68)

T=35.7 N

Hence the tension in the vertical segment of the wire will be 35.7 N

C)  the x-component of the acceleration of the box. will be 2.68 m/s².

aₓ = 2.68 m/s²

D)The x- and y-components of the force that the axle exerts on the pulley will be 32.2 and 61.2 N respectively.

Fx = 32.2 N

Fy = 35.7 + 2.60(9.81) = 61.2 N

Hence the x- and y-components of the force that the axle exerts on the pulley will be 32.2 and 61.2 N respectively.

To learn more about acceleration refer to the link;

https://brainly.com/question/969842

Answer:

i think its D or B

Explanation:

i just think

On Earth,in atmosphere the hydrogen is found in the less quantity. Option C is correct.

The chemical element hydrogen has the atomic number 1 and the symbol H. The smallest element is hydrogen.

Hydrogen is found in large numbers on Earth in combination with other elements, such as water and hydrocarbons, yet it is only 0.00005 percent present in Earth's atmosphere.

On Earth,in atmosphere the hydrogen is found in the less quantity.

Option C is correct.

To learn more about the hydrogen refer:

https://brainly.com/question/11837837

#SPJ2

Answer:

Explanation:

What are we to use as gravity in this imaginary world? I will ASSUME 9.81 m/s² and assume no air resistance.

horizontal velocity component

vx = 55.0/2.50 = 22 m/s

vertical initial velocity component

(12.0 - 10.0) = 0 + vy₀(2.50) + ½(-9.81)2.50²

vy₀ = 13.0625 m/s

θ = arctan(vy₀/vx) = arctan(13.0625/22) = 30.6997225... = 30.7°

The kinetic energy of the arrow when it is about to hit the ground is 34.7 J.

The given parameters;

According the principle of conservation of energy, the total potential energy of the arrow will be converted to maximum kinetic energy when the arrow is about to hit the ground.

[tex]K.E = P.E + U_x\\\\K.E = 34.3 \ J \ + \ 0.4 \ J\\\\K.E = 34.7 \ J[/tex]

Thus, the kinetic energy of the arrow when it is about to hit the ground is 34.7 J.

Learn more about conservation of energy here:

https://brainly.com/question/24772394

Answer:

P1 = 1.3 (500 + 60) = 728 kg-m      total momentum to right at start

P2 = (v2 - 10) 60 + 500 v2

total momentum after running at -10 with respect to cart = 728 where v2 is the new speed of the cart

728 = 560 v2 - 600

v2 = 1328 / 560 = 2.37 m/s    new speed of cart

Check:

After:    p2 for cart = 500 * 2.37 = 1186

p1 for man = (2.37 - 10) * 60 = -458

P2 = p1 + p2 = 728       total momentum unchanged

The length of the ship in terms of Emily's equal steps is 84.

The given parameters;

Defined parameters:

The velocity of Emily when moving forward in the direction of the ship:

[tex]V_s_1 = \frac{210}{t}[/tex]

The velocity of Emily when moving in opposite direction to the ship:

[tex]V_s_2 = \frac{42}{t}[/tex]

The constant velocity of the ship:

[tex]V = \frac{d}{t}[/tex]

Apply relative velocity formula to determine the length of the ship:

For forward (same direction) motion:

[tex](V_s_1 - V)t = d[/tex]

For backward (opposite direction) motion:

[tex](V_s_2 + V)t = d[/tex]

[tex](V_s_1 - V)t = (V_s_2 + V)t\\\\V_s_1 - V = V_s_2 + V\\\\\frac{210}{t} - \frac{d}{t} = \frac{42}{t} + \frac{d}{t} \\\\\frac{210}{t} - \frac{42}{t} = \frac{d}{t} + \frac{d}{t} \\\\\frac{210 - 42}{t} = \frac{d+ d}{t} \\\\\frac{168}{t} = \frac{2d}{t} \\\\2d = 168\\\\d = \frac{168}{2} \\\\d = 84[/tex]

Thus, we can conclude that the length of the ship in terms of Emily's equal steps is 84.

"Your question is not complete, it seems to be missing the following information;"

Emily sees a ship traveling at a constant speed along a straight section of a river. She walks parallel to the riverbank at a uniform rate faster than the ship. She counts 210 equal steps walking from the back of the ship to the front. Walking in the opposite direction, she counts 42 steps of the same size from the front of the ship to the back. In terms of Emily's equal steps, what is the length of the ship

Learn more here:https://brainly.com/question/24430414

Answer:

the action or process of moving or being moved.

Explanation:

which an object changes its position over time

At the equilibrium position of the spring, the mass has kinetic energy

1/2 (1.00 kg) (0.0400 m/s)² = 0.000800 J = 0.800 mJ = 800 µJ

and when the spring is maximally compressed, this kinetic energy is converted into potential energy.

The maximum spring potential energy of the simple harmonic motion is approximately 7.48 millijoules.

To find the maximum spring potential energy (Us) in simple harmonic motion, we need to determine the maximum displacement (A) of the mass from its equilibrium position.

In simple harmonic motion, the maximum displacement is equal to the amplitude of the oscillation.

The formula for maximum displacement (A) is given by:

A = v0 / ω

where v0 is the initial velocity (4.00 cm/s) and ω is the angular frequency of the oscillation.

The angular frequency (ω) is given by:

ω =[tex]\sqrt{(k / m)[/tex]

where k is the spring constant (9.00 N/m) and m is the mass (1.00 kg).

Substitute the values:

ω = [tex]\sqrt{(9.00 N/m / 1.00 kg)} = \sqrt{9.00 rad/s[/tex] ≈ 3.00 rad/s

Now, calculate the maximum displacement:

A = 4.00 cm/s / 3.00 rad/s ≈ 1.33 cm

Next, calculate the maximum spring potential energy:

Us =[tex](1/2) * k * A^2[/tex]

Us = (1/2) * 9.00 N/m * [tex](1.33 cm)^2[/tex]≈ 7.48 mJ

To know more about spring potential energy, here

brainly.com/question/29510087

#SPJ2

--The compleete Question is,  A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then what is the maximum spring potential energy of the simple harmonic motion--

Answer:

See Below

Explanation:

I am not sure what you exact question is to know what direction it is but here is how you do it.

The direction of the net force is the direction of the largest force.

for example if you were to push a box forward with 100 newton's of force and someone pushed at the same time 50 newton's backwards on the box, the box would move forwards because the was a greater force on the box in a forward direction. hope this helps

A. psychodynamic is the personality best explains Sam's behavior

The psychology of mental or emotional forces or processes developing especially in early childhood and their effects on behavior and mental states is called psychodynamic .

Since , any behavior  is not genetical or it never get inherited hence it is not biological . This has been  grown with time and this behavior have been grown in Sam by observing his parents doing the same hence correct option should be A. psychodynamic

learn more about psychodynamic

https://brainly.com/question/10373312?referrer=searchResults

#SPJ2

Answer:

The answer is D

Explanation:

The chloroplast absorbs sunlight for energy not the cell wall

Answers

The car's forward motion is opposed by the friction between the road and the tires and by the resistance of the air.

The study of the atom contribute d to our understanding of the periodic table of the elements by virtue of the following;

As we know; the periodic table is an array of elements in order of their atomic number.

In which case, the periodic table is made up of 7 rows otherwise called Periods and 8 columns otherwise called Groups.

Read more;

https://brainly.com/question/13984769

Answer:

a

Explanation:

Answer: a, c, d

Explanation: a is true because the object will continue to move even without any force because of inertia (so yh thats why a is true). c is true because an object can accelerate if a single force acts on it. to accelerate (not move), it needs a force to act on it

Would appreciate brainly <3

Explanation:

inertia ...

you push or throw something, and you apply some force to it at that moment, but then it moves and keeps moving even long after you have no more connection to it, and no more force is applied to it.

please consider : we are only talking about moving. not about acceleration.

so, yes, (a) is true.

(c) is true.

(d) is true.

Answer:

Acceleration due to gravity on a certain planet = 4 m/s²

Explanation:

According to the question,

Weight = 30 N

Mass = 7.5 kg

Let acceleration due to gravity be 'a'

Formula:

Weight = Mass × Acceleration due to gravity

30 = 7.5 × a

a = 30/7.5

a = 4 m/s²

Answer:

A5 A20 A32 5G A1 G A20 5G T mOBIL

[tex]\\ \rm\rightarrowtail Avg\: velocity=\dfrac{Total\: Displacement }{Total\: time}[/tex]

[tex]\\ \rm\rightarrowtail Avg\: velocity=\dfrac{4}{2}=2m/s[/tex]