What is the electron pair geometry around oxygen in a hydronium ion?.

Answer:

The density of no2 in a 4. 50 l tank at 760. 0 torr and 25. 0 °c is 1.88 g/l.

a) The reaction of KH with NH₃ is a neutralization reaction, and its equation is: [tex]KH + NH_3 \rightarrow KOH + NH_4[/tex]

Neutralization is a process where two different substances react to form a new substance that is not acidic or basic. It is a chemical reaction in which an acid and a base react to form a salt and water. This reaction is called neutralization because the result of the reaction is a neutral solution with pH close to 7. Neutralization reactions are often used to neutralize acids or bases in a solution, in order to make it safe to use. Additionally, neutralization reactions can be used to remove acidic or basic impurities from a solution.

The reaction of KH with ethanol is a proton transfer reaction, and its equation is:

[tex]KH + CH_3CH_2OH \rightarrow KOH + CH_3CH_2O- + H^+[/tex]

b) The conjugate acid-base pairs in the first reaction are NH⁴⁺ and NH₃, and in the second reaction they are [tex]CH_3CH_2O-[/tex] and [tex]CH_3CH_2OH[/tex].

To learn more about neutralization

https://brainly.com/question/23008798

#SPJ4

Food color additives were initially used for a variety of reasons, including to improve the appearance of food, to enhance the taste or flavor, and to make food more visually appealing. In the past, natural colorings such as saffron, turmeric, and beet juice were used to color food, but these were often expensive and difficult to obtain.

As a result, synthetic food colors were developed in the early 1900s to replace these natural colorings. These synthetic food colors were made from coal tar, and were initially used to color candies and other sweets.

Over time, food color additives became more widely used in a variety of food products, including beverages, baked goods, and processed foods. Today, food color additives are used for a variety of reasons, including to improve the visual appeal of food, to identify flavors or ingredients, and to stabilize or enhance the texture of food products.

you know more about Food color additives pls visit-

https://brainly.com/question/31840925

#SPJ11

The mass of H₂O (in g) must form to produce 975 kJ of energy is 4365 g.

Mass is defined as the amount of matter contained in an object. It is a measure of the quantity of matter present in a body and is usually measured in kilograms (kg). Mass is distinct from weight, which is a measure of the gravitational force exerted on an object.

The equation given is:
[tex]SiO_2(s) + 4HF(g) \rightarrow SiF_4(g) + 2H_2O(l) \Delta rH ^\circ = -184 kJ[/tex]
We can solve this problem by using the equation: ΔrH° = q/n, where q is the energy released, and n is the number of moles of the reaction.
In this equation, q is 975 kJ and n is 2 moles of H₂O (l). Therefore, we can calculate the mass of H₂O (in g) by rearranging the equation to:
m = q/n x M, where m is the mass, q is the energy released, n is the number of moles, and M is the molar mass of H₂O (l).
Substituting in the values we have:
m = 975/2 x 18 g/mol
= 8730/2 g
= 4365 g
Therefore, the mass of H₂O (in g) must form to produce 975 kJ of energy is 4365 g.

To learn more about mass

https://brainly.com/question/837939

#SPJ4

The lattice enthalpy of dissociation of a compound is the energy required to completely separate one mole of the solid into its constituent ions in the gas phase. It can be calculated using the Born-Haber cycle, which relates the lattice enthalpy to other thermodynamic quantities such as enthalpies of formation, ionization energies, and electron affinities.

In this case, we can use the following Born-Haber cycle for the dissociation of silver fluoride:

AgF(s) → Ag+(g) + F^-(g)

ΔH°f(AgF) + ΔH°sub(Ag) + IE(Ag) + EA(F) + ΔH°hyd(Ag+) + ΔH°hyd(F^-) - ΔH°lat = 0

where ΔH°f(AgF) is the enthalpy of formation of silver fluoride, ΔH°sub(Ag) is the sublimation enthalpy of silver, IE(Ag) is the first ionization energy of silver, EA(F) is the electron affinity of fluorine, ΔH°hyd(Ag+) is the enthalpy of hydration of silver ions, ΔH°hyd(F^-) is the enthalpy of hydration of fluoride ions, and ΔH°lat is the lattice enthalpy of dissociation of silver fluoride.

We are given ΔH°f(AgF) = -318 kJ/mol, ΔH°sub(Ag) = 286 kJ/mol, IE(Ag) = 731 kJ/mol, EA(F) = -328 kJ/mol, and ΔH°hyd(Ag+) = -464 kJ/mol. We need to calculate ΔH°lat.

First, we can use the enthalpy of solution for silver fluoride in water to calculate the enthalpy of dissolution:

ΔH°diss = -ΔH°sol = 20 kJ/mol

Next, we can use the Born-Lande equation to relate the enthalpy of dissociation to the enthalpy of dissolution:

ΔH°lat = ΔH°diss + ΔH°vib + ΔH°rot + ΔH°trans

where ΔH°vib, ΔH°rot, and ΔH°trans are the vibrational, rotational, and translational contributions to the enthalpy of the solid, respectively. For an ionic solid like silver fluoride, these contributions are relatively small and can be neglected.

Therefore, we can estimate the lattice enthalpy of dissociation as:

ΔH°lat ≈ ΔH°diss = 20 kJ/mol

Note that this is only an estimate, and the actual value may be slightly different due to the neglected contributions and other factors.

To learn more about, lattice enthalpy, click here, https://brainly.com/question/29570387

#SPJ11

When using a sling psychrometer to establish which place has lower relative humidity, compare the wet-bulb and dry-bulb temperatures at each site and calculate the relative humidity for each.

The sling psychrometer calculates relative humidity by comparing the dry-bulb temperature (recorded with a conventional thermometer) to the wet-bulb temperature (measured with a thermometer with a wet wick). The difference between the two temperatures shows the amount of moisture in the air. The lower the relative humidity, the larger the disparity.

You may tell whether site has a lower relative humidity by comparing the wet-bulb and dry-bulb temperatures and calculating the relative humidity using the sling psychrometer.

learn more about Relative humidity here:

https://brainly.com/question/10849972

#SPJ4

The no of moles of carbondioxide that can be produced from 3.2 moles of glucose is 6.4 moles.

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, glucose decomposes into ethanol and carbondioxide. Based on the equation as in the image, 1 mole of glucose produces 2 moles of carbondioxide.

This means that 3.2 moles of glucose will produce 3.2 × 2 = 6.4 moles of carbondioxide.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

The number of moles of the CO2 that is going to be produced in the reaction is 6.4 moles.

Stoichiometry is a branch of chemistry that deals with the quantitative relationship between reactants and products in chemical reactions.

We have to note that we have to apply the stoichiometry of the reaction so that we can be able to solve the problem that we have in the case that we are dealing with here.

We know that;

1 mole of glucose produces 2 moles of CO2

3.20 moles of glucose  will produce 3.2 * 2/1

= 6.4 moles of CO2

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

The ionization of HOCl (hypochlorous acid) in solution is dependent on the concentration of H+ ions. Therefore, a salt that could decrease the concentration of H+ ions in solution would also decrease the ionization of HOCl.

Option (D) NaOH is a strong base that could neutralize H+ ions and hence decrease their concentration in solution. Therefore, adding NaOH to a solution of HOCl would decrease the ionization of HOCl in solution.

Option (A) NaCl, option (B) NaOCl, option (C) Na2O, and option (E) BaCl2 do not directly affect the concentration of H+ ions in solution, and hence would not have a significant effect on the ionization of HOCl.

To know more about hypochlorous acid click here:

https://brainly.com/question/16984896

#SPJ11

if  titrate 25.00 ml of 0.0500 m phosphoric acid with 0.19 m naoh then it takes 19.7 mL of 0.19 M sodium hydroxide to completely titrate 25.00 mL of 0.0500 M phosphoric acid

we can use the balanced chemical equation for the reaction between phosphoric acid (H3PO4) and sodium hydroxide (NaOH):
H3PO4 + 3NaOH → Na3PO4 + 3H2O
From the equation, we can see that 1 mole of phosphoric acid reacts with 3 moles of sodium hydroxide. Therefore, we need to determine the number of moles of phosphoric acid in 25.00 ml of 0.0500 M solution:
moles of H3PO4 = volume (L) x concentration (M)
moles of H3PO4 = 0.025 L x 0.0500 M
moles of H3PO4 = 0.00125 mol
To completely titrate the phosphoric acid, we need 3 times as many moles of sodium hydroxide:
moles of NaOH = 3 x moles of H3PO4
moles of NaOH = 3 x 0.00125 mol
moles of NaOH = 0.00375 mol
Now we can use the concentration of sodium hydroxide to determine the volume required to titrate the phosphoric acid:
volume of NaOH (L) = moles of NaOH / concentration of NaOH
volume of NaOH (L) = 0.00375 mol / 0.19 M
volume of NaOH (L) = 0.0197 L
Finally, we convert the volume to milliliters:
volume of NaOH (mL) = 0.0197 L x 1000 mL/L
volume of NaOH (mL) = 19.7 mL
Therefore, it takes 19.7 mL of 0.19 M sodium hydroxide to completely titrate 25.00 mL of 0.0500 M phosphoric acid.
To know more about phosphoric acid visit :

https://brainly.com/question/8156365

#SPJ11

The Kb value for ammonia (NH3) is 1.8 x 10^-5.

To find the pH of the ammonia solution, we need to first calculate the concentration of hydroxide ions ([OH-]) using the Kb value:

Kb = [NH4+][OH-]/[NH3]

1.8 x 10^-5 = x^2 / 0.0030

x = 1.16 x 10^-3 M

Next, we use the [OH-] concentration to calculate the pH:

pOH = -log[OH-] = -log(1.16 x 10^-3) = 2.94

pH = 14 - pOH = 14 - 2.94 = 11.06

Therefore, the pH of a 0.0030 M solution of ammonia is approximately 11.06. Answer: (B) 10.37 (rounded to two decimal places).

To know more about pH, click here-

https://brainly.com/question/15289741

#SPJ11

Radon is a naturally occurring radioactive gas that may cause lung cancer.

Radon is a chemical element with the symbol as Rn and atomic number as 86. It is a radioactive, colorless, odorless and tasteless noble gas that occurs naturally as a decay product of radium. It is the heaviest noble gas and is considered to be one of the rarest elements on the Earth.

Radon is highly radioactive and is significant contributor to the background radiation dose received by most of the people. It is the second leading cause of lung cancer after smoking, and exposure to high levels of radon has also been linked to an increased risk of other types of cancer.

To know more about radon, refer

https://brainly.com/question/1121893

#SPJ11

The pH of a solution formed by mixing 250.0 mL 0.15 M NH₄Cl is measured as 9.26.

Option B is correct.

V = 250 ml of

M = 0.15 NH₄Cl

V = 100 ml

M = 0.20

            pOH= pKb + log(HB+ / B)

                   mol = M × V

     mol = 0.15 × 250

                = 37.5 mmol of NH₄Cl

mol of NH₃ = M × V = 0.2 ×100

                     = 20 mmol of NH₃

mol of NH₃ = M × V = 0.2 × 200

                     = 40 mmol of NH₃

pKb = -log(Kb) = -log( 1.8x10-5) = 4.75

From pOH = pKb + log(HB+ / B)

                     pOH = pKb + log(HB+ / B)

                   pOH = 4.75 + log(37.5/20)

                               pOH = 5.02

pH = 14-pOH = 14-5.02 = 8.98

                              pH = 8.98

pOH = pKb + log(HB+ / B)

pOH = 4.75 + log(37.5/40) = 4.72

pH = 14-pOH = 14-4.72 = 9.26

pH =9.26

The chemical conditions of a solution are reflected in the pH, an important quantity. The pH can regulate the availability of nutrients, biological functions, microbial activity, and chemical behavior.

Temperature is one of the elements that can cause such changes in a synthetic framework, influencing its balance state and pH level. An expansion in temperature makes the framework's balance shift, engrossing the overabundance intensity and prompting the development of H+ particles, which brings about a lessening in the arrangement's pH.

Incomplete question:

Calculate the pH of a solution formed by mixing 250.0 mL of 0.15 M NH₄Cl with 200.0 mL of 0.12 M NH₃. The Kb for NH₃ is 1.8 × 10 -5.

A. 4.74

B. 9.26

C. 9.45

D. 4.55

E. 9.06

Learn more about pH :

brainly.com/question/12609985

#SPJ4

The degree of polarization of an anion depends on its size, shape, and electronic structure.

Polarizability refers to the ability of an ion or molecule to undergo deformation in response to an external electric field. The degree of polarization of an anion depends on several factors, including its size, shape, and electronic structure. Larger anions are more polarizable than smaller ones because their outer electrons are more loosely held and more easily displaced by an external electric field. Similarly, anions that have a more diffuse electronic distribution are more polarizable than those with a more compact distribution. This is because the electrons in a diffuse distribution are more easily displaced by an external field. Anion shape can also affect polarizability, with more elongated or asymmetric shapes generally being more polarizable than symmetrical ones. Understanding the factors that affect anion polarizability is important in fields such as chemistry, materials science, and condensed matter physics.

Learn more about polarization  here:

https://brainly.com/question/30002497

#SPJ11

The boiling point of a substance is determined by the strength of intermolecular forces between its molecules. The stronger the intermolecular forces, the higher the boiling point. The correct answer is: I₂.

Out of the given options, the molecule with the highest boiling point would be the one with the strongest intermolecular forces. Since the strength of intermolecular forces increases with the size of the molecule, we can predict that I2 would have the highest boiling point among F₂, Cl₂, Br₂, and I₂.

As non-polar molecules, the halogens  F₂, Cl₂, Br₂, and I₂ are subject to London dispersion forces as their primary intermolecular forces. Larger molecules often have stronger London dispersion forces and higher boiling temperatures because these forces are a form of van der Waals force that increase with molecule size.

I₂ has a larger size than the other halogens, which results in stronger London dispersion forces and a higher boiling point than the others. F₂, on the other hand, has the lowest boiling point among the halogens because to its smallest size and thus weakest London dispersion forces.

Therefore, these halogens' boiling points would be in this order:

F₂  ∠ Cl₂  ∠ Br₂  ∠ I₂

To know more about the intermolecular forces refer here :

https://brainly.com/question/9007693#

#SPJ11

The statement "Substances which have a very low solubility in water are likely to have a positive/negative ∆Hsol" is generally true, with some exceptions. ΔHsol refers to the enthalpy change associated with the dissolution of a substance in water. If the value of ΔHsol is negative, then the process of dissolving the substance in water releases energy (i.e., it is exothermic), and the substance is said to be soluble in water. Conversely, if ΔHsol is positive, then the process of dissolving the substance in water requires energy (i.e., it is endothermic), and the substance is said to be insoluble or only slightly soluble in water.

Substances that have a very low solubility in water are typically hydrophobic (water-repelling), and their intermolecular forces of attraction are stronger than their forces of attraction to water molecules. Therefore, it requires a significant amount of energy to break these intermolecular forces and allow the substance to dissolve in water, resulting in a positive ΔHsol. However, there are some exceptions, such as some salts, which have a high lattice energy and are highly soluble in water despite having a positive ΔHsol.

TO KNOW MORE ABOUT Substances which have a very low solubility CLICK THIS LINK -

brainly.com/question/12728230

#SPJ11

A) They all behave like metals under certain conditions.

Alkali metals, alkaline earth metals, and halogens are all elements in the periodic table, but they are not all in the same group. Alkali metals are in group 1, alkaline earth metals are in group 2, and halogens are in group 17. Despite being in different groups, these elements do share some common properties. One such property is that they all exhibit metallic behavior under certain conditions. Alkali metals and alkaline earth metals are both highly reactive metals, while halogens are highly reactive non-metals. However, all three groups can conduct electricity, form cations with a +1 or +2 charge, and have relatively low ionization energies.

To learn more about alkali metals, click here: https://brainly.com/question/18153051

#SPJ11

Connecting water to a condenser so that it flows in at the bottom and out at the top is the best way to ensure that the condenser operates effectively.

A condenser is an electrical device used in many applications such as air conditioning, refrigeration, and heat pumps. It is a type of heat exchanger that works by transferring heat from one medium to another by allowing the two mediums to come into contact and exchange heat. Condensers are often used to cool air or liquid by allowing the hot air or liquid to come into contact with a cold surface, which causes the heat to be transferred away. Condensers are also used to convert steam into liquid form, as well as to collect and condense a vapor.

This arrangement allows the hot vapors from the reaction to travel up the condenser, where they come into contact with the cool water flowing down from the top. This ensures that the vapors are cooled, condensed, and collected in the flask below. This arrangement also helps to minimize the risk of the reaction product entering the water supply, as the condensed product will collect in the flask below, rather than the water supply.

To learn more about condenser
https://brainly.com/question/29457387
#SPJ4

Effect of decreased ocean pH on marine organisms such as coral :

1. CO₂(aq) + H₂O(l) → H₂CO₃(aq)
2. H₂CO₃(aq) → H⁺(aq) + HCO₃⁻(aq)
3. Ca²⁺(aq) + CO₃²⁻(aq) → CaCO₃(s)
4. H⁺(aq) + CO₃²⁻(aq) → HCO₃⁻(aq)

Decreased ocean pH affects marine organisms such as coral through the following steps in this order:

1. Carbon dioxide (CO₂) dissolves in water (H₂O) to form carbonic acid (H₂CO₃).
2. Carbonic acid (H₂CO₃) dissociates into a hydrogen ion (H⁺) and a bicarbonate ion (HCO₃⁻).
3. Calcium ions (Ca²⁺) combine with carbonate ions (CO₃²⁻) to form calcium carbonate (CaCO₃), the primary building material of coral skeletons.
4. Increased hydrogen ions (H⁺) in the water react with carbonate ions (CO₃²⁻) to form more bicarbonate ions (HCO₃⁻), reducing the availability of carbonate ions needed for coral growth.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ11

Based on the reduction potentials given, the following gives the balanced chemical equation and the correct standard cell potential for a galvanic cell is 2Sc(s)+3Mn²⁺(aq)⇄2Sc³⁺(aq)+3Mn(s) E°=+0.90V, option D.

Electrons are transferred from one species to another during oxidation-reduction processes. If the reaction occurs spontaneously, energy is released. As a result, the energy that has been released is put to good use. To deal with this energy, the reaction must be divided into the two half-reactions of oxidation and reduction. The reactions are injected into them to move the electrons from one end to the other end using two separate containers and wire. Thus, a voltaic cell is produced.

The Gibbs energy of the spontaneous redox reaction in the voltaic cell is primarily responsible for the electrical work produced by a galvanic cell. A salt bridge and two half cells are often its only components. A metallic electrode submerged in an electrolyte completes each half cell. Metallic wires are used to link these two half-cells outside to a voltmeter and a switch. A salt bridge is not always necessary when both electrodes are submerged in the same electrolyte.

Learn more about Galvanic cell;

https://brainly.com/question/29765093

#SPJ4

Complete question:

Based on the reduction potentials given in the table above, which of the following gives the balanced chemical equation and the correct standard cell potential for a galvanic cell involving Sc3+(aq) and Mn2+(aq) ?

A

2Sc3+(aq)+3Mn(s)⇄2Sc(s)+3Mn2+(aq) E°=−0.90V

B

2Sc3+(aq)+3Mn(s)⇄2Sc(s)+3Mn2+(aq) E°=−0.62V

C

2Sc(s)+3Mn2+(aq)⇄2Sc3+(aq)+3Mn(s) E°=+0.62V

D

2Sc(s)+3Mn2+(aq)⇄2Sc3+(aq)+3Mn(s) E°=+0.90V

The amount of energy evolved can be calculated using the equation ΔrH° = -1396 kJ.

An equation is a mathematical statement that expresses the equality of two expressions. It consists of two expressions separated by an equals sign (=). Equations are used to describe relationships between variables, and can be used to solve for a variable given the values of the other variables. Equations are also used to describe physical laws and other natural phenomena, such as the laws of motion and the principles of thermodynamics. Equations can also be used to describe relationships between different types of data, such as the relationship between temperature and pressure.

We can calculate the number of moles of Cl2 using the equation:moles Cl2 = (5.65 L)(1 mol/22.4 L) = 0.252 mol.The total number of moles of reactants is 0.363 mol.Therefore, the amount of energy evolved during the reaction is -505.4 kJ.

To learn more about equation

https://brainly.com/question/29886207

#SPJ4

In the borohydride reduction of camphor, NaBH₄ provides hydride ions (H⁻) to reduce camphor.

Option a. H⁻ is the correct answer.

Classical or earlier concepts define reduction as the addition of hydrogen or any electropositive element or the removal of oxygen or any electronegative element.

During the borohydride reduction of camphor, the hydride ion (H⁻) from NaBH₄ acts as a nucleophile, attacking the carbonyl group of camphor. This leads to the formation of an alkoxide intermediate, which then undergoes a proton transfer step to form an alcohol product.

The hydride ion acts as a reducing agent in this reaction, donating a pair of electrons to the carbonyl carbon, which reduces the carbonyl group to an alcohol group. This process is possible because the boron atom in NaBH₄ has a partially positive charge, which makes it an electron-deficient species, and thus it can easily donate hydride ions to a suitable substrate.

Therefore, in the borohydride reduction of camphor, NaBH₄ provides hydride ions (H⁻) to reduce camphor.

Option a. H⁻ is the correct answer.

Learn more about reduction on:

https://brainly.com/question/8493642

#SPJ4

The beaker with the greatest temperature change will have the largest difference between its initial and final temperatures.

To determine which beaker has the greatest temperature change, you need to follow these steps:

1. Record the initial temperature of each beaker using the thermometer.
2. After every minute for five minutes, record the temperature of each beaker using the thermometer.
3. Create a table with the temperature(Heat) readings of each beaker at each time interval.
4. Calculate the temperature change in each beaker by subtracting the initial temperature from the final temperature after five minutes.
5. Compare the temperature changes of all four beakers.

To know more about temperature Visit:

https://brainly.com/question/11464844

#SPJ11

This political cartoon comments on events that occurred during a particular time period or event in history. To analyze the cartoon, you should first identify the time period it is referencing by observing any recognizable figures, symbols, or text within the image.

Next, consider the message the cartoonist is trying to convey through the use of satire, exaggeration, or symbolism.

Once you have an understanding of the message, you can connect it to the historical events, political movements, or societal issues of that time. Lastly, consider the effectiveness of the cartoon in expressing its message and its potential impact on the public's perception of the events during that time.

To know more about political cartoon visit:

https://brainly.com/question/1545458

#SPJ11

An indicator is a substance that changes its color at a particular pH, transitioning from one color to another color. The specific color change depends on the indicator used.

An indicator is a substance that changes color depending on the pH of the solution it is in. The specific color change will vary depending on the indicator used. Some indicators will go from colorless to colored, while others will go from colored to colorless. Some indicators may even change from one color to another color.

The type of color change that occurs is determined by the chemical structure of the indicator and how it reacts with hydrogen ions in the solution. Therefore, it is important to choose the correct indicator for the specific pH range you are trying to measure.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ11

Answer: D) depends on the indicator

The balanced chemical equation for the decomposition of BrCl is:

2BrCl(g) ⇌ 2Br(g) + Cl2(g)

What is Equilibrium?

In chemistry, equilibrium refers to a state in which the forward and reverse reactions of a chemical reaction occur at the same rate, resulting in no net change in the concentrations of reactants and products over time. At equilibrium, the concentrations of reactants and products remain constant, and the reaction appears to have stopped, even though the individual reactions are still taking place at equal rates.

The equilibrium constant expression for this reaction can be written as:

Kc = [Br]^2 [Cl2] / [BrCl]^2

where [Br], [Cl2], and [BrCl] are the molar concentrations of Br, Cl2, and BrCl, respectively, at equilibrium. The square brackets denote the concentration of each species in units of moles per liter (M). The value of Kc for this reaction indicates the extent to which the reactants and products are present at equilibrium. A large value of Kc indicates that the products are favored at equilibrium, while a small value of Kc indicates that the reactants are favored.

Learn more about Equilibrium from the given link

https://brainly.com/question/517289

#SPJ4

The quantity of moles of NO₂ gas that forms when 5.20*10⁻³ mol N₂O₅ gas completely reacts: 5.20 x 10⁻³ mol N₂O₅ gas .

Gas is a state of matter in which a substance has no definite shape or volume, existing as a cloud of particles that are typically made up of molecules. It is one of the four fundamental states of matter, along with solid, liquid and plasma. Gases are defined as substances that can be readily compressed and expanded, and which can diffuse rapidly into the surrounding medium.

We are asked to calculate the quantity of moles of NO₂ gas that forms when 5.20 x 10⁻³ mol N₂O₅ gas completely reacts.
We can use the coefficients in the balanced equation to determine the molar ratio between N₂O₅ and NO₂.
For every 1 mole of N₂O₅ that reacts, 2 moles of NO₂ will be formed.
Therefore, the amount of NO₂ gas that forms when 5.20 x 10⁻³ mol N₂O₅ gas completely reacts is:
NO₂ = (2 x 5.20 x 10-3 mol N₂O5) = 1.04 x 10⁻² mol NO₂.

To learn more about gas

https://brainly.com/question/25736513

#SPJ4

One piece of information that 9" gives about an atom of fluorine is that it has 9 protons in its nucleus, determining its atomic number.

An atom of fluorine is represented by the symbol F and has an atomic number of 9, which indicates the number of protons in its nucleus. This is the most crucial information that "9" provides. In a neutral atom, there are also 9 electrons surrounding the nucleus in specific energy levels or electron shells.

These electrons determine the chemical properties and reactivity of the element. Fluorine has 2 electrons in its first shell and 7 electrons in its second shell. The outermost shell, with 7 electrons, has one unpaired electron, making fluorine highly reactive and enabling it to form one covalent bond with other elements.

Learn more about electrons here:

https://brainly.com/question/29450589

#SPJ11

The compound for each of the following are: (a) Na₃P is an ionic compound called sodium phosphide, (c) SO₂ is a covalent compound called sulfur dioxide.

Ionic chemistry is a type of chemical bonding which involves the transfer of electrons between two atoms.

Ionic compounds are composed of a metal and a non-metal, while covalent compounds are composed of two non-metals. Na₃P contains a metal (sodium) and a non-metal (phosphorus), so it is an ionic compound. Its IUPAC name is sodium phosphide.

SO₂, on the other hand, contains two non-metals (sulfur and oxygen), so it is a covalent compound. Its IUPAC name is sulfur dioxide. In covalent compounds, atoms share electrons in order to achieve a stable electron configuration. In SO₂, the sulfur atom shares two electrons with each of the oxygen atoms, resulting in a molecule with a bent shape and a characteristic smell. It is used in many industrial processes, such as in the production of sulfuric acid.

To learn more about Ionic

https://brainly.com/question/977324

#SPJ4

The pH of the resulting solution is 12.63, if 31.0 ml of 0.310 m HCl(aq) is added to 41.0 ml of 0.310 m NaOH (aq) solution.

To solve this problem, we need to first calculate the moles of acid and base in the solution and then use them to determine the concentration of the resulting solution.

Moles of HCl = 0.310 M x 0.0310 L = 0.00961 mol

Moles of NaOH = 0.310 M x 0.0410 L = 0.0127 mol

Since HCl and NaOH react in a 1:1 ratio, the limiting reagent is HCl. Therefore, all of the HCl will react with NaOH, leaving an excess of NaOH in the solution.

After the reaction, the moles of excess NaOH remaining in the solution is;

Moles of excess NaOH = 0.0127 mol - 0.00961 mol

= 0.00309 mol

The total volume of resulting solution is;

Total volume = 0.0310 L + 0.0410 L = 0.0720 L

The concentration of the excess NaOH is;

Concentration of excess NaOH = 0.00309 mol / 0.0720 L

= 0.0429 M

To find the pH of the resulting solution, we need to calculate the concentration of OH⁻ ions from the excess NaOH;

[OH⁻] = 0.0429 M

pOH = -log[OH⁻] = -log(0.0429) = 1.37

pH = 14.00 - pOH = 14.00 - 1.37 = 12.63

Therefore, the pH of the resulting solution will be 12.63.

To know more about resulting solution here

https://brainly.com/question/27890353

#SPJ4

The molarity of the ammonia solution in this problem is 2.42 M. This titration problem requires the use of stoichiometry to determine the molarity of the ammonia solution.

The balanced chemical equation is used to determine the mole ratio between ammonia and nitric acid, which is 1:1. Knowing the volume and molarity of the nitric acid used, the moles of nitric acid can be calculated. Since the mole ratio between the two reactants is 1:1, the moles of ammonia in the 12.00 ml sample is equal to the moles of nitric acid used in the titration. Finally, the molarity of the ammonia solution is calculated by dividing the moles of ammonia by the volume of the ammonia solution used. The molarity of the ammonia solution in this problem is 2.42 M.

To find the molarity of the ammonia solution, we need to use the balanced chemical equation of the reaction between ammonia and nitric acid:

NH₃ + HNO₃ → NH₄NO₃

From the equation, we can see that the mole ratio between ammonia and nitric acid is 1:1. This means that the moles of ammonia in the 12.00 ml sample is the same as the moles of nitric acid used in the titration, which is:

moles of HNO₃ = (1.499 mol/L) x (19.48 mL/1000 mL) = 0.02899 mol

Therefore, the molarity of the ammonia solution is:

Molarity of NH₃ = moles of NH₃ / volume of NH₃ solution
Molarity of NH₃ = 0.02899 mol / 12.00 mL = 2.42 M

Learn more about titration here:

https://brainly.com/question/30140546

#SPJ11