Explanation:
First, you need to be sure the elemental analysis has identified all the components.
83.7+16.3=100% so we’re good, and the same ratio works for the formula,
The formula is CxHy, so x*12+y*1= 100% of the empirical formula wt, which we’ll use later to confirm the elemental analysis. We need x and y
Then x = 83.7/12 is 6.975 and being savvy, we guess it’s supposed to be 7, since empirical formulas use whole numbers if they can. Likewise y=16.3/1 = 16.3, and now we round down to the nearest whole number (16), making our empirical formula C7H16
Check:
7*12+16*1=100 (the empirical formula wt) 84/100=0.84 and 16/100=0.16 This is close enough, so C7H16 is the empirical formula.
A jar contains 0.29 kg of olives. How many grams of olives are in the jar?
1 kilogram = 1000 grams
0.29 kg = 290 grams.
request: please mark brainiest, and click the thanks button if correct <3
A jar contains 0.29 kg of olives. The quantity of olives in the jar is 290 grams.
What is the conversion factor?A conversion factor may be significantly defined as a process through which a number is utilized in order to change one or specific set of units to another with the help of mathematical operations like multiplication and division.
According to the question,
The number of olives in the jar = 0.29 kg.
Now, if you want to convert this set of units into grams, you must require simple calculations:
1 kilogram = 1000 grams.
0.29 kilograms = 0.29 × 1000 = 290 grams.
Therefore, a jar contains 0.29 kg of olives. The quantity of olives in the jar is 290 grams.
To learn more about the Conversion factors, refer to the link:
https://brainly.com/question/28308386
#SPJ2
Which is an example of a solution?
Answer: Examples:: Rubbing Alcohol, Dissolved Sugar in Water
Explanation:
A solution is a homogeneous mixture made up of two or more substances.
You add 9.3 g of iron to 28.60 mL of water and observe that the volume of iron and water together is 29.78 mL . Calculate the density of iron.
Express your answer to two significant figures with the appropriate units.
Answer:
density = mass / volume
mass of iron = 9.3g
volume of iron = 29.78ml - 28.00ml = 1.78 ml
density of iron = 9.3 / 1.78 = 5.22471910112 = 5.0
Explanation:
blants, water moves in a continuous column in direction. Both One direction, down only One direction, up only Any way it wants to move
Answer:
i like one direction
Explanation:
1
Which organelle is the site of photosynthesis? *
(15 Points)
A. chloroplast
B. mitochondrion
C. nucleus
O
D. ribosome
Answer:
A. Chloroplast
Explanation:
The recommended single dose for acetaminophen is 10.0 to 15.0 mg/kg of body weight for adults. Using this guideline, calculate the maximum single dosage for a person who weighs 153 lb .
Answer:
1.041g is the maximum sigle dose for the person
Explanation:
The maximum dose for acetaminophen is 15.0mg / kg of body weight for adults
To find the maximum single dosage for a person who weighs 153lb we must convert the lb to kg (1lb = 0.4536kg):
153lb * (0.4536kg / 1lb) = 69.4kg is the mass of the person
As the maximum dose is 15.0mg / kg, the dose of the person is:
69.4kg * (15.0mg acetaminophen / kg) =
1041mg = 1.041g is the maximum sigle dose for the personWhat do we call the force produced by the interaction of electricity and magnets?
A. Electricity
B. Electromagnetism
C. Gravity
D. Magnetism
Hurry!
Which element easily gains one electron to form a negative ion?
A. Magnesium (Mg)
B. Fluorine (F)
C. Lithium (Li)
D. Nitrogen (N)
Answer:
B. Fluorine (F) element easily gains one electron to for a negative ion.
Which describes a difference between cephalopods and gastropods?
Cephalopods have a water vascular system, and gastropods have an open circulatory system.
Cephalopods live only in ocean environments, and gastropods live in a variety of environments.
Cephalopods have a simple nervous system, and gastropods have a complex nervous system.
Cephalopods are the largest group of mollusks, and gastropods are the smallest group of mollusks. CAN SOMEONE PLZZZZ ANWER THIS I WILL GIVE U 15 PIONTS
Answer:
B
Explanation:
I took the test
Answer:
The correct answer is B
Explanation:
Clouds are formed from which of the following processes:
A.evaporation
B.condensation
C.precipitation
Answer: Condensation
Explanation: Condensation forms clouds when water vapor in the air cools down into water and crystals.
X-rays are electromagnetic waves that can penetrate skin, but not bone. In hospitals, X-rays are used to produce images of bones. How do X-rays compare to visible light? A. X-rays have a higher frequency and carry more energy than visible light. B. X-rays have a higher frequency and carry less energy than visible light. C. Visible light has a higher frequency and carries more energy than X-rays. D. Visible light has a higher frequency and carries less energy than X-rays.
Answer:
A. X-rays have a higher frequency and carry more energy than visible light.
Explanation:
Answer:
A. X-rays have a higher frequency and carry more energy than visible light
Explanation:
Both x-rays and visible light are electromagnetic waves.
The amount of energy carried by an electromagnetic wave depends on the frequency of the wave. The frequency of x-rays is greater than that of visible light, so the energy carried by x-rays is also greater than that of visible light. The high frequency of x-rays allows them to penetrate skin, but they are absorbed by bone, which allows an image of the bone to be produced.
What is chyme? It’s a brain-pop question
Answer:
the pulpy acidic fluid which passes from the stomach to the small intestine, consisting of gastric juices and partly digested food.
A 0.0300 mol sample of NO2(g) is placed in a rigid 1.00 L reaction vessel and allowed to reach equilibrium at a certain temperature. What is the value of Kc at this temperature if 0.00500 mol of N2O4(g) is present at equilibrium
Answer:
12.5
Explanation:
Step 1: Write the balanced equation
2 NO₂(g) ⇄ N₂O₄(g)
Since the reaction takes place in a 1.00 L vessel, the initial concentration of NO₂ is 0.0300 M and the concentration at equilibrium of N₂O₄ is 0.00500 M.
Step 2: Make an ICE chart
2 NO₂(g) ⇄ N₂O₄(g)
I 0.0300 0
C -2x +x
E 0.0300-2x x
Step 3: Find the value of x
Since [N₂O₄]eq = 0.00500 M, x = 0.00500
Step 4: Calculate the concentrations at equilibrium
[NO₂] = 0.0300-2(0.00500) = 0.0200 M
[N₂O₄] = 0.00500 M
Step 5: Calculate the concentration equilibrium constant (Kc)
Kc = [N₂O₄]/[NO₂]²
Kc = 0.00500/0.0200²
Kc = 12.5
would the ph shift observed with the buffer hace been greater less or the same if 0.4 M buffer had been used instead of 0.2
Answer:
It will remain the same.
Explanation:
A buffer solution is a kind of solution that has resistance for changes in the pH of a solution. It is a solution of weak acid and conjugate base or it may be otherwise.
H^+ + A^- <====================> HA.
Buffer solution aids in stabilizing pH and an example of a buffer solution is the human blood.
The higher the concentration, the lower the ka and vice versa. Thus, when 0.4M is being used instead of 0.2M the pH will be the same because when dealing with buffer solution, it is all about the value of (salt) / (acid) rather than on the molarity of one specie alone.
The height of three peaks; A, B, and C obtained in a gas chromatogram are 25.1 mm, 14.5 mm and 37.1 mm. The width of the peaks, at half height, are 4.6 mm, 4.4 mm and 5.9 mm, respectively. Calculate the percentage composition of A in the sample.
Answer: Percentage Compositon Of A in the sample= 28.99%
Explanation:
First we calculate the Peak area.
Because each peak is consdered like a triangle in a Chromatogram, The Area of the peak is calculated as = height x half height of the width
Area of Pea A= 25.1 mm X 4.6mm=115.46mm2
Area of Peak B= 14.5mm x 4.4mm=63.8mm2
Area of PeaK C= 37.1mm x5.9mm =218.89mm2
Total Peak Area= 398.15mm2
Percentage Area of Peak A = Area of Peak A/Total Peak Area x 100
= 115.46 / 398.15 x 100
=0.2899 x 100
=28.99%
Percentage Compositon Of A = 28.99%
7.5 moles of nitrogen gas (N2) is formed in the following reaction. How many grams
of Ammonia (NH3) are formed?
3H2 + N2 + 2NH
Answer:
Mass = 255 g
Explanation:
Given data:
Number of moles of nitrogen = 7.5 mol
Mass of ammonia formed = ?
Solution:
Chemical equation:
3H₂ + N₂ → 2NH₃
Now we will compare the moles of nitrogen and ammonia.
N₂ : NH₃
1 : 2
7.5 : 2/1×7.5 = 15
Mass of ammonia:
Mass = number of moles × molar mass
Mass = 15 mol × 17 g/mol
Mass = 255 g
If an object is accelerating at a rate of 25 m/s2, how long (in seconds) will it take to reach a speed of 550 m/s? (Assume an initial velocity of zero.)
Answer:
22s
Explanation:
Given parameters:
Acceleration = 25m/s²
Final velocity = 550m/s
Initial velocity = 0m/s
Unknown:
Time taken = ?
Solution:
To solve this problem, we are going to use one of the motion equations:
v = u + at
v is the final velocity
u is the initial velocity
a is the acceleration
t is the time taken
550 = 0 + 25 x t
550 = 25t
t = 22s
What describes the relationship between elements and compounds?
Group of answer choices
A. Carbon changes to Oxygen to form a compound
B.A few elements can combine to form a compound
C. Carbon is always a part of a compound
D. A few compounds combine to form an element
Answer:
B. A few elements can combine to form a compound
Explanation:
An element is a substance that cannot be chemically broken down into simpler substances. (THESE ARE IN THE PERIODIC TABLE OF THE ELEMENTS)A compound is a substance composed of two or more elements in fixed, definite proportions.Source: Tro Nivaldo J.. Principles of Chemistry (p. G-4). Pearson Education. Kindle Edition.
Answer:
.A few elements can combine to form a compound
Explanation:
What is the mass number of atom with 7neutron and 7 proton number
Howmuch woodwouldawoodchuckchuckifawoodchuckcouldchuckwoodwoodchuckcouldchuckwoodwoodchuck
Answer:
7 bcs atomic number of atom is its number of proton.
hope it helps.
Find the mass of an object that has a density of 1.5 g/cm3 and has a volume of 8cm3
Answer:
density= 1.5 g/cm3
volume= 8cm 3
mass = density×volume
mass= 1.5×8
= 12 g
The mass of an object will be "12 g". To understand the calculation check below.
Volume, Density and MassAccording to the question,
Density, d = 1.5 g/cm³
Volume, V = 8 cm³
We know the relation,
→ Mass = Density × Volume
or,
m = d × V
By substituting the values, we get
= 1.5 × 8
= 12 g
Thus the response above is correct.
Find out more information about mass here:
https://brainly.com/question/1762479
Calculate the molar mass of pentacarbon disulfide.
Answer:
[tex]MM_{C_5S_2}=132.19g/mol[/tex]
Explanation:
Hello!
In this case, since the computation of the molar mass requires the molecular formula, we first realize that of pentacarbon disulfide is C₅S₂ due to the given prefixes. In such a way, we multiply the atomic mass of carbon by five and that of sulfur by two as shown below:
[tex]MM_{C_5S_2}=5m_C+2m_S[/tex]
Thus, we plug in the atomic masses given in the periodic table to obtain:
[tex]MM_{C_5S_2}=5*12.01+2*32.07\\\\MM_{C_5S_2}=132.19g/mol[/tex]
Best regards!
A cylinder is filled with 10.0 L of gas and a piston is put into it. The initial pressure of the gas is measured to be 90.1 kPa .The piston is now pulled up, expanding the gas, until the gas has a final volume of 49.0 L. Calculate the final pressure of the gas. Round your answer to 3 significant digits.
Answer:
18.4 kPa
Explanation:
Step 1: Given data
Initial volume of the cylinder (V₁): 10.0 LInitial pressure of the gas (P₁): 90.1 kPaFinal volume of the cylinder (V₂): 49.0 LFinal pressure of the gas (P₂): ?Step 2: Calculate the final pressure of the gas
If we assume the gas behaves as an ideal gas, we can calculate its final volume using Boyle's law.
P₁ × V₁ = P₂ × V₂
P₂ = P₁ × V₁/V₂
P₂ = 90.1 kPa × 10.0 L/49.0 L
P₂ = 18.4 kPa
The liquid 1-decanethiol is insoluble in water. If approximately equal volumes of water and 1-decanethiol were mixed in a separatory funnel, would the water layer end up on the top or on the bottom
Answer:
1-decanethiol on top layer and water on the bottom layer.
Explanation:
Hello!
In this case, since long-chained alcohols have a predominant nonpolar section in the molecule, we understand they are largely insoluble in water, also because their densities tend to be less than that of the water, which means they act as a light phase and water the heavy phase.
In such a way, when mixing equal volumes of 1-decanethiol and water in a separatory funnel, a phase splitting is evidenced and the alcohol remains on the top layer because of its lower density.
Best regards!
What is the energy of the absorbed photon?
Answer:
When it is absorbed, it is converted into heat energy, and the object heats up.
Explanation:
When the photon is absorbed, it is released as heat energy.
Consider the generic Lewis dot symbol for an element. An atom X with three valence electrons. Which element could this symbol represent?
The image having the complete question is attached to this answer.
Answer:
Ga
Explanation:
In order to answer this question well, we must have a good enough knowledge of the periodic table.
We know that the elements in group 3A or group 13 of the periodic table have three valence electrons in their outermost shell.
We just have to look out among the options to notice if there is any member of group 3A or 13.
Gallium is a member of this group. Hence the answer above.
I NEED HELP WITH #3 pleaseeee
Answer:
energy level
sub energy level
electrons in the orbital
Explanation:
Calculate the density of an object that has a mass of 5.0g and a volume of 25.0mL?
Answer:
1/5g/ml
Explanation:
D=m/v
D=5.0/25
D=1/5g/ml
Which condition leads to a slower rate of weathering?
O porous rocks
O cold climates
O hard minerals
O high temperatures
Answer
Cold Climates
Explanation:
It can go slow
How do index fossils help scientistsHow do index fossils help scientists?
They aid in the study of ranges of different organisms.
They advance understanding of the origin of life on Earth.
They aid in comparison of rock layers at distant locations.
They advance understanding of rock type at the time the organism lived.
Answer:
C: They aid in comparison of rock layers at distant locations.
Explanation:
Index fossils are simply fossils of organisms that existed over a wide area and for just a brief duration of time. These fossils help scientists to date rocks and even matching the layers.
Looking at the options, the correct one is Option C.
Answer:
C
Explanation:
EDGE 2022
Energy that is associated with the relative positions of electrons and nuclei in atoms and molecules is called
Answer:
chemical energy
Explanation:
chemical energy is potential energy
The energy associated with the relative positions of electrons and nuclei in atoms and molecules is called thermal energy.
Generally, the energy possessed by an object due to its position is known as potential energy of the object while the energy possessed by an object due to its motion is called kinetic energy.
However, thermal energy describes the energy that is associated with the relative positions of electrons and nuclei in atoms and molecules.
Thus, we can conclude that the energy associated with the relative positions of electrons and nuclei in atoms and molecules is called thermal energy.
Learn more here:https://brainly.com/question/11298690
