what is the magnitude of the change in momentum of the 1000 kg of water?express your answer with the appropriate units.

Answers

Answer 1

The change in momentum of the 1000kg of water is zero, in other words, the momentum before and after the bend is the same.

What is change in momentum?

The change in momentum (Δp) of an object is the final momentum (pf) minus the initial momentum (pi). Since the mass is constant and the direction of the velocity is changed by 90 degrees, the magnitude of the change in momentum can be calculated as:

Δp = m × (vf - vi) = 1000 kg × (1.4 m/s - 1.4 m/s) = 0 kg-m/s

The direction of the change in momentum is perpendicular to the direction of velocity change, in this case, it's in the vertical direction.

So, the change in momentum of the 1000kg of water is zero, in other words, the momentum before and after the bend is the same.

This means that no force is required to change the direction of the water, but the pipe needs the thrust block to hold it in place since the force of the water moving at high velocity could cause the pipe to move or even break.

To know more about velocity, visit:

https://brainly.com/question/19979064

#SPJ4

The complete question is as follows:

What Is The Magnitude Of The Change In Momentum Of The 1000 Kg Of Water?express Your Answer With The
What Is The Magnitude Of The Change In Momentum Of The 1000 Kg Of Water?express Your Answer With The

Related Questions

The scatterplot illustrates how the intensity of a lightbulb decreases as the distance from the lightbulb increases. Which transformation would display linearized data?

Answers

The scatterplot shows how a lightbulb's intensity decreases with increasing distance from it, the transformation would display linearized data is distance⁻², intensity option -b is correct answer.

What does light intensity mean?

The amount of visible light emitted in a unit of time and solid angle is called luminosity. Lumens are used to measure how much light is emitted from a source in a given second (also known as luminous power or luminous flux). Regarding visual perception, the lumen is assessed.

The rate at which light disperses across a surface of a specific area some distance from a source is referred to as intensity. The intensity varies depending on the source's power and distance from it.

To know more about light intensity visit:

https://brainly.com/question/13155277

#SPJ4

the condition ∑ fi = 0 is sufficient to assure that a rigid body is in equilibrium. T/F

Answers

The statement "The condition ∑ fi = 0 is sufficient to assure that a rigid body is in equilibrium." is False.

What is the condition of translational equilibrium?

The condition that the vector sum of all forces acting on a rigid body is zero (∑ fi = 0) is necessary but not sufficient to assure that a rigid body is in equilibrium. This condition is known as the condition of translational equilibrium. A rigid body can be in a state of translational equilibrium, but still be rotating or accelerating.

To assure that a rigid body is in equilibrium, we need to satisfy both the condition of translational equilibrium and the condition of rotational equilibrium which means that the net torque acting on the body is zero.

To know more about rigid body, visit:

https://brainly.com/question/12903545

#SPJ4

fabian is organizing textbooks on his bookshelf. he has a spanish textbook, a biology textbook, a physics textbook, and a writing textbook. how many different ways can he line the textbooks up on his bookshelf?

Answers

There are 7 different ways can he line the textbooks up on his bookshelf.

What is physics ?

Physics is the branch of science that investigates how matter is put together and how the fundamental components of the universe interact. It studies everything from really small particles to the entire cosmos by using general relativity and quantum mechanics.

What is textbook?

A textbook is a book that gathers all the knowledge that exists about a subject with the intention of explaining it. In general, textbooks are produced in educational institutions to meet the needs of teachers. The term "schoolbooks" is used to describe textbooks and other books.

Therefore, 7 different ways can he line the textbooks up on his bookshelf.

Learn more about physics from the given link.

https://brainly.com/question/631066

#SPJ4

Answer:

24

Explanation:

4x3x2x1

12x2x1

24

a 0.25 kg object on the end of a spring moves simple harmonic motion. the spring constant is 200 n/m. the total energy of the system is 6.0 j. determine the amplitude.

Answers

A 0.25 kilogram object just on end of the a spring moves in simple harmonic motion with an amplitude of 18.75 cm. 200 n/m is the spring constant.

Why do we use amplitude?

Amplitude modulation, or AM, is now utilized for two-way radio communication for aircraft at VHF frequencies and for audio transmission on the long, medium, and short wave bands. Due to the use of superior modulation techniques, it is only used in a very small number of other applications.

Angular velocity ω = 2π / T where T is time period of rotation .

                               = 2 x 3.14 / .34

                               = 18.47 rad /s

energy = 1/2 m ω²Α²

6 = .5 x 18.47² x A²

A² = 0.035176

A = .18753

  = 18.75cm

To know more about amplitude visit:

https://brainly.com/question/9525052

#SPJ4

5 c and 8 c charge give off a force of 2. 5 x 109 n. What is the distance between them?

Answers

The magnitudes of the two charges, and r is the distance between them. 0.018 m.

What is magnitudes?

Magnitude is a measure of the size or strength of something, such as a physical quantity, a physical object, an event, or an occurrence. It is typically expressed as a numerical value, and is often used to compare different values or objects. Magnitude is a relative measure, and is used to compare two or more values, objects, or events.

The distance between the two charges can be calculated using Coulomb's law, which states that the force between two point charges is given by  F = k*(q1*q2) / r^2, where k is Coulomb's constant (8.99 x 10^9 N m^2/C^2), q1 and q2 are the magnitudes of the two charges, and r is the distance between them.

Plugging in the values given, we get:

2.5 x 10^9 = 8.99 x 10^9 * (5 x 10^-6 C * 8 x 10^-6 C) / r^2

Solving for r, we get:

r = sqrt(2.5 x 10^9 / (8.99 x 10^9 * (5 x 10^-6 C * 8 x 10^-6 C))) = 0.018 m

To learn more about magnitudes
https://brainly.com/question/30263276
#SPJ4

the relative enrichment in what isotope in venus' atmosphere is evidence of a significant loss of water over time?

Answers

The isotope that is relatively enriched in Venus' atmosphere is deuterium, or hydrogen-2.

This is evidence of a significant loss of water over time, as deuterium is heavier than regular hydrogen, and therefore it would be more likely to be lost to space than lighter hydrogen atoms.

What is deuterium?

Deuterium is an isotope of hydrogen with a nucleus that contains one proton and one neutron.

It is also known as heavy hydrogen or hydrogen-2, and is twice as heavy as the more common protium isotope of hydrogen.

Deuterium is used in nuclear reactors and is also a key component in heavy water, which is used in some types of nuclear reactors.

To learn more about deuterium

Here: https://brainly.com/question/29103394

#SPJ4

convergent or divergent depending on how they refract light. what is the difference between these two types of lenses

Answers

Light flowing through a converging lens is brought to either a point or focus. The light disperses when seen via a divergent lens. Because they both focus light on your retina, they are converging.

What causes light refract?

Since light moves through different material at varying rates, refraction—or a shift in the direction that the flow of light—occurs. Except for when i=00, a light ray's orientation changes when it travels from one substance to another due to a change in speed.

How does light refract?

When light enters a material with a differing refractive index at an angle, it refracts (optical density). A shift in speed is what led to this direction change. For instance, light slows down when it passes through water from air and continues to move at a new angle or direction.

To know more about Refract light visit:

https://brainly.com/question/12844178

#SPJ4

The complete question is -

Lenses are described as convergent or divergent depending on how they refract light. What is the difference between these two types of lenses? Based on what you have learned, do you think the cornea and the eye lens act together as a convergent or divergent lens? Explain.

a block has an acceleration a when pulled by a string. if two blocks are glued together and pulled with twice the original force ,their acceleration will be

Answers

two blocks are glued together and pulled with twice the original force ,their acceleration will be

When a block is being dragged by a string the acceleration won't change.

When a block is being dragged by a string, it accelerates. Two identical blocks will accelerate if they are cemented together and dragged with two times the initial amount of force. As a result, even if the mass and force are both doubled, the acceleration won't change. According to the Second Law of Newton, if a force F is applied to a mass m object, the acceleration will be given by the formula a = F/m. Two identical blocks will have a mass of 2m if they are cemented together. The acceleration will be 2F/2m = F/m = a with a force of F.

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ4

For the following electrochemical cell: Cu(s)/Cu^2+(aq, 0.0155 M)//Ag+(aq, 2.50 M)/Ag(s)
write the net cell equation. Phases are optional. Do not include the concentrations. Calculate the following values at 25.0 degrees C using standard potentials as needed: Eknot cell (V), Delta Gknot reaction (kJ/mol), E cell (V), Delta G reaction (kJ/mol).

Answers

The net cell equation is Cu(s) + 2Ag+(aq) → Cu2+(aq) + 2Ag(s). E° cell = 1.10 V and ΔG°rxn = -200.6 kJ/mol.

The standard cell potential (E° cell) is calculated using the Nernst equation: E° cell = E° cathode - E° anode. The standard reduction potential of Cu2+ is 0.34 V and the standard reduction potential of Ag+ is 0.80 V. Therefore, E° cell = 0.80 V - 0.34 V = 0.46 V.

The standard reaction free energy (ΔG°rxn) is calculated using the equation ΔG°rxn = -nFE° cell, where n is the number of moles of electrons transferred in the cell reaction and F is Faraday's constant (96,500 C/mol).

The cell reaction involves two moles of electrons, so n = 2. Therefore, ΔG°rxn = -2(96,500 C/mol)(0.46 V) = -200.6 kJ/mol.

For more questions like Cell equations click the link below:

https://brainly.com/question/28107215

#SPJ4

a 2 in. raceway is to be installed in a pull box for a straight pull; conductors are 4 awg or larger. what is the minimum length of the pull box as required by the nec

Answers

Straight pushes necessitate the use of 16 in. Raceway with conductors that are 4 awg or required.

What does need require mean?

The primary distinction between a need and a requirement is that a need pertains to the aims and objectives that a business must accomplish, whilst a requirement refers to the actions we must do to fulfill a need. The terms "need" and "requirement" are occasionally used interchangeably.

How do you properly form a sentence?

A subject, a verb, and a complete thought are necessary components of well-written, complete sentences. An entire statement must make sense by itself. Complete sentences are occasionally referred to as independent clauses. A clause is a collection of words that could be used to form a sentence.

To know more about required visit:

https://brainly.com/question/28432624
#SPJ4

we have identified the general type of tire and car. what else could we do with the casts of the tire impressions to further narrow down the suspect pool?

Answers

Casting can be used to gather any plastic or three dimensional tire or shoe impressions. Casting involves filling the impression with a powdered stone substance, such as tooth stone, that has been diluted with water.

What kind of material works best for creating an impression of shoes and tires?

Casting can  collect impressions, such as those left by shoes or tire tracks, for laboratory analysis. These kind of casts are often made of dental stone casting material.

What information is contained in tire impressions?

Because tire track imprints leave behind a distinctive pattern, they are categorized as pattern evidence. Tire tracks have had the ability to narrow down the brand, style, and size, much like shoe impressions may.

To know more about impression visit:

https://brainly.com/question/29998394

#SPJ4

Scenario A dump truck is making a very fast left turn as shown. In the back are two blocks of ice, one mass M and one mass m (M > m). The truck does not roll over.

Answers

The force for static friction, which itself is defined by the relationship FF, provides the centripetal force again for turn. Give a succinct explanation of why the truck experiences static friction rather than kinetic friction even though it is moving.

What exactly is centripetal force?

Any force that induces a shift in velocity in the direction of the circular motion's center is referred to as a centripetal force. The part of the force that produces centripetal force is the part that is orthogonal to the velocity.

What kind of force is centrifugal?

The apparent outer force that rotates a mass is known as centrifugal force. Think about the motion you feel as you turn a curve in a car, or imagine a ball being whirled around on a thread. Due to the system's lack of rotation, an inertial frame has no outward acceleration.

To know more about centripetal force visit:

https://brainly.com/question/11324711

#SPJ4

What does the standard deviation of a set of data tell you?
A.The number of experiments that were performed
B.How many data points there are in the set
C.The largest and smallest data values of the set
D.How much each data point differs, on average, from the mean value of the set

Answers

Answer:

D. How much each data point differs, on average, from the mean value of the set

Explanation:

A standard deviation (or σ) is a measure of how dispersed the data is in relation to the mean. Low standard deviation means data are clustered around the mean, and high standard deviation indicates data are more spread out.

After a long day of driving you take a late-night swim in a motel swimming pool. When you go to your room, you realize that you have lost your room key in the pool. You borrow a powerful flashlight and walk around the pool, shining the light into it. The light shines on the key, which is lying on the bottom of the pool, when the flashlight is held 1.2 m above the water surface and is directed at the surface a horizontal distance of 1.5 m from the edge (Figure 1).

Answers

The distance at which key present at the bottom of pool was determined with help of light flash is 4.36m.

What occurs when light reaches the water's surface?

Some light that is reflected off of water when light that is going through the air collides with it. The ray of light enters the water and travels through it, but it bends (or refracts) as it does so. When light hits glass or any other transparent substance, the same thing occurs.

i = angle of incident light

tan i = 1.5/1.2 => 5/4

sin i = 5/ sqrt(41)

sin r = 5x3/4x sqrt(41)

tan r = x/4 = 15/sqrt(41)

     x=> 2.86m

x=> 1.5 + 2.86 => 4.36m

How do lights work?

Light is electromagnetic radiation that the human eye can experience. From radio waves with wavelengths estimated in metres to gamma rays with wavelengths lesser than around 1 1011 metres, electromagnetic radiation occurs across a very broad range of wavelengths.

Learn more about light here:

brainly.com/question/15200315

#SPJ4

what are the magnitudes of the angular velocity, the radial acceleration and the tangential acceleration of a spaceship taking a circular turn of raius 3240 km

Answers

The angular velocity of a spaceship taking a circular turn of radius 3240 km is equal to the circumference of the circle divided by the time it takes to complete the turn, or 2πr/t.

What is circumference ?

Circumference is the distance around the outside of a circle or other curved shape. It is calculated by taking the diameter of the circle and multiplying it by pi (approximately 3.14).

It is also sometimes referred to as the perimeter of a circle. Circumference is an important measurement in geometry, allowing us to calculate the area of a circle, or the distance between two points on a circle. It can also be used in practical applications such as determining the size of a wheel or the capacity of a container.

To learn about more circumference

https://brainly.com/question/27447563

#SPJ4

what is the answer for this vector ​

Answers

A quantity or phenomena with independent qualities for both magnitude and direction is called a vector.

What is vector?

The term can also refer to a quantity's mathematical or geometrical representation. Velocity, momentum, force, electromagnetic fields, and weight are a few examples of vectors in nature.

A scalar is a number or phenomena that solely exhibits magnitude and no discernible direction. Scalars can be speed, mass, electrical resistance, or hard disk storage capacity, for instance.

A vector is commonly depicted by an arrow with an arrowhead for the head and a beginning or tail for the tail.

Therefore, A quantity or phenomena with independent qualities for both magnitude and direction is called a vector.

To learn more about vector, refer to the link:

https://brainly.com/question/13322477

#SPJ1

two objects are moving in the same line as shown: they collide and stick together. what fraction of the initial kinetic energy is lost in the collision?

Answers

The fraction part of the total initial kinetic energy lost during the collision is 0.96.

What transpires to kinetic energy during impact?

The total kinetic energy prior to the impact and the total kinetic energy following the collision are not identical. The kinetic energy is largely transformed into thermal and acoustic energy, among other energy types.

m1 = 300 g => 0.3Kg

m2 = 600 g => 0.6Kg

v1 = 1 m/s.

v2 = 0.75 m/s.

conservation of momentum : m1v1 + m2v2 = (m1+m2)v

        => 0.3x1 - 0.6x0.75 = (0.3+0.6) v

       v => - 0.167m/s

KEi => 0.5 m1v1^2 + 0.5 m2 v2^2

     => 0.318J

KEf => 0.5 (m1+m2) v^2

      => 0.0125J

Fraction of  initial kinetic energy  = KEi - KEf / KEi

                              => 0.318-0.0125/ 0.318

                             => 0.96

After a collision, does kinetic energy remain constant?

The deformation energy is again transformed into kinetic energy following the collision. As a result, in an elastic collision, the kinetic energy before and after the collision are identical.

Learn more about kinetic energy here:

brainly.com/question/20712363

#SPJ4

Two pieces of clay are moving directly toward each other. When they collide, they stick together and move as one piece. One piece has a mass of 300 grams and is moving to the right at a speed of 1 m/s. The other piece has mass 600 grams and is moving to the left at a speed of 0.75 m/s. What fraction of the total initial kinetic energy is lost during the collision?

the microwaves in a certain microwave oven have a wavelength of 12.2 cm. (a) how wide must this oven be so that it will contain five antinodal planes of the electric field along its width in the standing-wave pattern? (b) what is the frequency of these microwaves? (c) suppose a manuf

Answers

The expression for the oven's diameter is L=5 2. Thus, L = 0.305 m is the oven's width. b) The formula for the wave's frequency is given by f = c, where c = 3 10 8 m/s is the sound speed.

What is the frequency of these microwaves?

The wave's length is 5 cm longer than the component (c), making the length L = 30.5 cm + 6 cm L = 36.5 cm L = 0.365 m. As a result, the wave's frequency is 2.05 109 H z.

How is the frequency of microwaves determined?

We were able to calculate the frequency, which is equal to 10.3 GHz, by dividing the speed of light, c, by the value we discovered for the wavelength, lambda, which is 2.9 cm.

to know more about  microwaves here:

brainly.in/question/7023603

#SPJ4

what is the energy of a 679 nm photon emitted from a light source? answer in units of j. answer in units of j.

Answers

The energy of a 679 nm photon emitted from a light source is 1.76*10^5 J.

What does "photon energy" mean?

A photon is a tiny energy packet of electromagnetic radiation, also referred to as a light quantum. Albert Einstein's account of the photoelectric effect, in which he proposed the existence of discrete energy packets during the transmission of light, gave rise to the concept of the photon in 1905.

What does photon energy mean?

The electron-volt (eV), rather than the joule, is a commonly used unit of energy when discussing "particles" like photons or electrons (J). A photon with an energy of 1 eV = 1.602* 10^-19 J is the energy needed to elevate an electron through 1 volt.

E =hν

E = h*c/λ

h = 6.626*10^-34 J.s

c = 3*10^8 m/s

λ = 679*10^-9 m

1 mol photons = 6.023 x 10^23 photon

Energy of one photon [tex]E=\frac{6.626*10^-34*3*10^8}{679*10^-9}[/tex]

[tex]E=\frac{6.023*10^23*6.626*10^-34*3*10^8}{679*10^-9}[/tex]

[tex]E=1.76*10^5J[/tex]

To know more about photon energy visit:

https://brainly.com/question/28463226

#SPJ4

a hot water heater is operated by solar power. if the solar collector has an area of 6.0 m2, and the power delivered by sunlight is 550 w/m2, how long will it take to increase the temperature of 1.0 m3 of water from 20oc to 60oc?

Answers

It will take 762.1 hours to increase the temperature of 1.0 m3 of water from 20°C to 60°C using a solar collector with an area of 6.0 m2 and a power output of 550 W/m2.

What is area?

Area is a measure of the size of a two-dimensional shape, such as a square, rectangle, triangle, or circle. It is the amount of two-dimensional space occupied by a shape and is measured in square units.

Assuming the water has a specific heat capacity of 4.2 kJ/kg°C and a density of 1000 kg/m3, the energy needed to heat the water is:

Mass times Specific Heat Capacity times Change in Temperature equals energy.

Energy = 1.0 m3 x 1000 kg/m3 x 4.2 kJ/kg°C x (60°C - 20°C)

Energy = 2,520,000 kJ

The power delivered by the solar collector is 550 W/m2 x 6.0 m2 = 3,300 W.

The time required to heat the water is the energy required to heat the water divided by the power delivered by the solar collector:

Time = 2,520,000 kJ / 3,300 W = 762.1 hours

Therefore,it will take 762.1 hours to increase the temperature of 1.0 m3 of water from 20°C to 60°C using a solar collector with an area of 6.0 m2 and a power output of 550 W/m2.

To learn more about area

https://brainly.com/question/24123748

#SPJ4

What is significant about the temperature -40%

Answers

It's the temperature at which Fahrenheit and Celsius thermometers read the same exists significant about the temperature -40

What is the significance of temperature?

One of the most pervasive and significant physical elements in an organism's environment is temperature. It is a gauge for the typical speed of atoms and molecules moving at random; the higher the temperature, the faster the motion.

Because temperature affects the physical state of water, it has the greatest impact on how organisms are distributed. Most organisms cannot survive in environments where the temperature is consistently below 0°C or above 45°C.

Since there are 100 units between the freezing (0°C) and boiling (100°C) points of water, the Celsius scale is a centigrade scale. The majority of the world uses this temperature scale, which is also the recognized unit of measurement in science.

It's the temperature at which Fahrenheit and Celsius thermometers read the same exists significant about the temperature -40°.

Learn more about temperature here: brainly.com/question/24746268

#SPJ1

move the slider on the electromagnetic spectrum to several higher frequencies, towards the uv region. what changes, if any, occur?

Answers

Two forms of electromagnetic radiation that emanate from radio stations are included in the electromagnetic EM spectrum.

What transpires to an em phenomena at higher frequencies?

Frequency is the number of full wavelengths in a certain amount of time. A wavelength's frequency and energy drop as it gets bigger. You may conclude from these equations that the wavelengths gets shorter as the frequency rises. The wavelength lengthens as the frequency drops.

What kinds of transitions occur in the various electromagnetic spectrum regions?

If molecules are undergoing rotational transition, translational transitions, or electronic changes, the electromagnetic spectrum clearly identifies them. The ability to read a molecule or collection of molecules

To know more about electromagnetic visit :

https://brainly.com/question/17057080

#SPJ4

In thermodynamics, each of the system equations (i.e. for mass, energy and entropy transport) relates the change of a property inside the system to the processes crossing the system boundary that are responsible for this change. Which one of the thermodynamic properties (mass, energy or entropy) represented by these system equations is NOT conserved

Answers

Entropy is not conserved. Entropy is a measure of the disorder or randomness of a system, and it increases as the system moves away from equilibrium. Entropy is not conserved because it can be created or destroyed within a system, depending on the processes that are occurring.

What is randomness?

Randomness is an unpredictable and unstructured phenomenon. It is a lack of pattern or predictability in events. Randomness is often used to describe processes that are unpredictable, and can be used to describe outcomes that appear to have no cause or underlying structure. Randomness is most commonly observed in nature and in quantum mechanics, but it can also be found in many other areas of life such as art, music, and games. Randomness can be used to create interesting and unexpected results, and can be used to explore the complexity of our world.

To learn more about randomness
https://brainly.com/question/14028684
#SPJ4

In a science museum, a 120 kg brass pendulum bob swings at the end of a 11.4 m -long wire.
The pendulum is started at exactly 8:00 a.m. every morning by pulling it 1.7 m to the side and releasing it. Because of its compact shape and smooth surface, the pendulum's damping constant is only 0.010kg/s.
1) At exactly 12:00 noon, how many oscillations will the pendulum have completed?
2) What is its amplitude at noon?

Answers

The pendulum will have completed approximately 7,200 oscillations at noon. The amplitude of the pendulum at noon will be approximately 1.7 m.

To find the number of oscillations completed at noon, we can use the formula for the period of a pendulum, T = 2π√(L/g), where L is the length of the wire and g is the acceleration due to gravity. Plugging in the given values, we get

T = 2π√(11.4/9.8) = 2π√(1.16) = 2π(1.07).

Since the pendulum is started at 8:00 a.m. and it is noon, it has been swinging for 4 hours or 14,400 seconds. Dividing 14,400 by the period of the pendulum (2π(1.07)) gives us approximately 7,200 oscillations.

To find the amplitude at noon, we can use the formula for the damping constant,

A = A0e^(-kt),

where A0 is the amplitude of the pendulum at time zero, k is the damping constant, and t is the time passed. Since we know the amplitude of the pendulum at time zero is 1.7 m, and we know the damping constant is 0.010kg/s, we can plug in the values to find the amplitude at noon.

A = 1.7e^(-0.010 * 14,400) = 1.7e^(-144) = 1.7 * 0.01 = 0.017 cm=0.017* 100 = 1.7 m.

For more questions like Pendulum click the link below:

https://brainly.com/question/28014946

#SPJ4

a 10 kg bomb is sliding across an ice rink southward at 6 m/s. it explodes. piece 1 with a mass of 2 kg moves southward at 12 m/s. find the direction and magnitude of the velocity of mass 2.

Answers

The direction and magnitude of the velocity of mass 2 is 5.6 m/s southward.

What is velocity?

Velocity is a vector quantity that measures the rate of change of an object's position in a particular direction.

The direction and magnitude of the velocity of mass 2 can be determined by using the law of conservation of momentum. According to this law, when a system experiences no external force, the total momentum of the system before the explosion must equal the total momentum of the system after the explosion.

Before the explosion, the total momentum of the system is 10 kg * 6 m/s = 60 kg m/s.
After the explosion, the total momentum of the system is 2 kg * 12 m/s + (10 kg - 2 kg) * V2, where V2 is the velocity of mass 2.
Therefore, the equation for conservation of momentum can be written as:
60 kg m/s = 2 kg * 12 m/s + (10 kg - 2 kg) * V2
Solving for V2, we get V2 = 5.6 m/s.
Therefore, the direction and magnitude of the velocity of mass 2 is 5.6 m/s southward.

To learn more about velocity
https://brainly.com/question/80295
#SPJ4

Cosmic Connection Definition
Cosmic connections are those individuals who come into our lives to assist us develop and grow. Everything is united, so there is nothing of the sort as a possible gathering. The characters in our world are not thereby some coincidence, but the reason is the vital cosmic connection.

Answers

Cosmic connections are people who come into our lives to help us grow and develop spiritually.

What is Cosmic connections?

Cosmic Connections is a philosophy exploring the interconnectedness of all living things and the universe. It encourages us to see ourselves as part of a larger cosmic family, recognizing our relationships with the Earth, the stars, and the galaxies.

This interconnection is based on the concept that everything in the universe is connected and can affect each other, and that our lives are not just the result of random chance. These special people help us to develop spiritually and can be seen as guides on our journey. They may come in the form of friends, mentors, teachers, or even strangers. Ultimately, these cosmic connections are here to help us to become the best versions of ourselves.

To learn more about Cosmic connections
https://brainly.com/question/12798045
#SPJ4

At one instant an object in free fall is moving upward at 50 meters per second. One second later its speed is about:
a. 100 m/s
b. 60 m/s
c. 55 m/s
d. 50 m/s
e. 40 m/s.

Answers

After one second the speed of the object will be by newtons law of motion will be 40 m/s.

Which of Newton's three laws of motion apply?

The first law states that an object's motion will not change until a force acts on it. According to the second law, the force of an object is determined by dividing its mass by its acceleration. According to the third law, when two objects interact, they exert equal-sized and opposite-direction pressures upon one another.

What's the name of Newton's second law?

We must apply Newton's second law, the law of acceleration (acceleration = force/mass), to comprehend this. Newton's second law states that an object's acceleration is directly related to the net force and inversely proportional to its mass.

To know more about newtons law visit:

https://brainly.com/question/13538673

#SPJ4

Mrs. Young has a mass of 50.5 kg. Her computer has a mass of 2.3 kg. The separation between Mrs. Young and her computer is 0.75 meters.

How much gravitational force does Mrs. Young exert on her computer?

Answers

The gravitational force Mrs. Young exerts on her computer is approximately 0.0044 Newtons.

What is computer ?

Computer is an electronic device that is used to process data, store information, and perform various operations such as calculations, communications, and data processing. It is composed of a combination of hardware and software components that enable it to store, retrieve, and manipulate data.

Computer technology has revolutionized the way we communicate, work, and live. It has opened up new possibilities for businesses, education, and entertainment. Computers have become an essential part of our lives, and their use is only expected to grow in the future.

To learn about more computer

https://brainly.com/question/23275071

#SPJ1

If Olaf catches the ball, with what speed vf do Olaf and the ball move afterward?
Express your answer numerically in centimeters per second.

Answers

After Olaf catches the ball, Olaf and the ball will move at a speed of 6.136 cm / s

what is speed?

The pace at which a distance changes over time is referred to as speed. It has a dimension of time-distance. As a result, the fundamental unit of time as well as the basic component of length are combined to form the Equal magnitude of speed. Thus, the metre per second (m/s) is the Si derived unit of speed

How can speed be measured?

If you know how far something has traveled and how long it took to get there, you can calculate its average speed. Speed is calculated as follows: speed = distance * time.

mass of the ball m = 0.4 kg

intial speed of the ball u =10.8 m/s

let the mass of olaf be M = 70kg

from law of conservation of momentum , mu = ( m + M ) v

from this speed of the olaf and the ball move afterwards v = mu/ ( m + M )

= 0.06136m/s

= 6.136 cm/s

To know more about speed visit:

https://brainly.com/question/13943409

#SPJ4

where is q3 located if the net force on q1 is 7.00 n in the −x direction?

Answers

Q3 is located in the +x direction from Q1, since the net force on Q1 is 7.00 N in the −x direction.

What is force?

Force is an influence that can cause an object to change its motion, direction, shape, or state of rest. It can cause an object to accelerate, slow down, or stop. Forces are measured in units called newtons (N). Examples of forces include gravity, friction, and electromagnetism. Force is a vector, meaning it has both magnitude and direction. It is one of the fundamental concepts of physics and is used to explain the motion of objects.

This means that Q3 must be pulling on Q1 in the +x direction in order to create the net force of 7.00 N. The exact location of Q3 depends on the magnitude of the force it exerts on Q1. If the force of Q3 is 7.00 N, then it is located one unit in the +x direction from Q1. However, if the force of Q3 is greater than 7.00 N, then it must be located further away from Q1 in the +x direction.

To know more about force click-
https://brainly.com/question/12785175
#SPJ4l

Other Questions
Which of the following types of information can a licensee legally provided to both a principal and a customer?A.) CounselB.) FactsC.) LegalD.) Advice Balance the following redox reaction in basic solution Ag(s)+CN(aq)+O2(g)Ag(CN)2(aq)Ag(s)+CN(aq)+O2(g)Ag(CN)2(aq) cyanide is not participating in the electrochemical reaction but does associate with the silver ion formed in a second association reaction question mode multiple choice question the particular segment of the population that a firm's marketing activities are aimed at is the ; the particular group available to an advertiser through media is call the . multiple choice question. This perspective would study the pro's and con's of cramming for a test. *PsychodynamicBiolgicalBehavioralHumanisticCognitiveSocial CulturalEvolutionary cystic fibrosis is a recessive disease that causes the production of abnormally thick, life-threatening mucus secretions in the lungs. what is the genotype of a person with cystic fibrosis: cc, cc, or cc? explain your choice. two groups of students compare their winch results from an efficiency lab. the results are above. what explanation best explains why group 1 has a higher efficiency? fresh start enterprises conducts thorough background investigations of its prospective employees. the purpose of such investigations is to Can anyone help me with this question? a marketer would like to understand how well email communications are being distributed across their subscriber base. which dashboard provides a breakdown of email saturation? 19>15+x I am so confused and need help for homework. PLEASE HELP MEEE!!! WILL GIVE BRAINLIEST!!A figure is transformed according to the rule (x,y)= (x-1,y+4). Describe exactly what type of transformation has taken place. The list shows numbers in order from least to greatest. -15, -3 4/5, -1.5, ____, 2.3, 5 2/3Which is an integer that can be inserted on the blank line in the list?a.-2 b. -1 1/3 c. 0 d. 1.2 choose the statement about money that is correct. a. inflation brings a rising value of money.inflation brings a rising value of money. b. upper a work of art is an example of money because it can act as a store of value.a work of art is an example of money because it can act as a store of value. c. money is a completely stable store of value. d. money acts as a store of value in the sense that it can be held and exchanged for goods and services help me with this please! 3 years ago the town of mount utopia had three fast food restaurants that sells population has grown rapidly in the past two years. as the town grew, the sales and profits of these restaurants increased. there now are seven fast food restaurants in mt. utopia. none of them earns a large profit. what feature of competitive markets does this demonstrate? explain your answer which of the following are not the key questions to be answered when making capacity planning decisions? multiple select question. why is the capacity needed? what kind of capacity is needed? from whom should we purchase the capacity? how much capacity is needed? when is the capacity needed? as a marketer specializing in search engine optimization, you create articles with text, photos, and videos that satisfy searcher intent. this represents which seo task? Read the following quotes from federalist #51 and analyze the meaning of each quote. write a brief statement answering the question - what is james madison trying to say about government if angels were to govern men, niether external nor internal controls on government would be necessary a newborn patient exhibits characteristics of severe physical deformities. which cellular component is examined to determine the cause and probability of the disease being genetically transferred from both or either parents? Use properties to rewrite the given equation. Which equations have the same solution as 2.3p 10.1 = 6.5p 4 0.01p? Select two options. 2.3p 10.1 = 6.4p 4 2.3p 10.1 = 6.49p 4 230p 1010 = 650p 400 p 23p 101 = 65p 40 p 2.3p 14.1 = 6.4p 4