What is the mass, in kilograms, of a large dog that weighs 441 newtons?​

Answers

Answer 1

Answer:

441 Newtons equals 44.97 kilograms.


Related Questions

Heat rising in a hot-air balloon is an example of __________.

Answers

Heat rising in a hot-air balloon is an example of convection.

explain the production of current with the help of a magnet and describe which device works on this phenomena

Answers

Answer:

Explanation:

The properties of magnets are used to make electricity. Moving magnetic fields pull and push electrons. ... Moving a magnet around a coil of wire, or moving a coil of wire around a magnet, pushes the electrons in the wire and creates an electrical current.

a gas increases in pressure from 2.00 atm to 6.00 atm at a constant volume of 1.00 m3 and then expands at constant pressure to a volume of 3.00 m3 before returning to its initial state as shown in the figure below. how much work is done in one cycle?

Answers

The work done on the given gas in one cycle is -405.3 kJ.

The given parameters;

initial pressure of the gas, P₁ = 2 atmfinal pressure of the gas, P₂ = 6 atminitial volume of the gas, V₁ = 1 m³final volume of the gas, V₂ = 3 m³

Convert the pressure to Pascal (N/m²);

1 atm = 101325

The work done in one cycle is the area of the triangle and it is calculated as follows

[tex]Area = \frac{1}{2} \times base \times height\\\\Area = \frac{1}{2} \times (3 \ m^3\ -\ 1 \ m^3)\times (6 \ atm \ - \ 2 \ atm)\\\\Area = 4 \ atm -m^3\\\\Area = 4 \ atm -m^3 \ \times \frac{101325 \ Pa}{1 \ atm} \\\\Area = 405,300 \ m^3.Pa\\\\Area = 405,300 \ m^3. (N/m^2)\\\\Area = 405,300 \ Nm\\\\Area = 405,300 \ J\\\\Area = 405.3 \ kJ[/tex]

the net work done on the gas = - 405.3 kJ

Thus, the work done on the given gas in one cycle is -405.3 kJ.

Learn more about work done in compressing gas here: https://brainly.com/question/19579139

Saima travels 2.5 km in 21.2 seconds. What as Saima's initial speed if her final velocity is 10.7 m/s?

Answers

Answer:

d/t = (230 km)/(3.25 h) = 70.8 km/h.

Explanation:

1. Shelly pushes a .0035 kg marble with
a force of .07.N.

Answers

Answer:

pressure= force/area

Explanation:

pressure= 0.07/0.0035

             = 20 pascal

Change.
Wax melting is an example of a chemical reaction.
True or false

Answers

i believe it is a physical change not chemical

A marble is launched at by dropping it through a marble launcher. The marble took 0.22s to land 0.31m from
where it was launched. Find the horizontal velocity of the marble as it rolls off the table.

A. 1.4m/s
B. 0.53m/s
C. 0.71 m/s
D. 0.07m/s

Answers

Hi there!

For projectile motion, the horizontal and vertical components are SEPARATE.

We can use the kinematic equation to solve:

dₓ = vₓt

We can rearrange to solve for vₓ:

dₓ/t = vₓ

0.31/0.22 = vₓ

vₓ = 1.4 m/s ⇒ A

What are 4 ways you can determine if a website is reliable?

Answers

Answer:

Identify the name of the individual, group or institution that created the website. A reliable website should clearly state the name of its creator. Generally, websites created by government institutions (.gov) and educational institutions (.edu) are considered more reliable.

A 50-n force is applied to a 10-kg chair, but the chair does not change its motion. What could explain this?.

Answers

Explanation:

it will not change it's motion because it's force is less than the force applied

The rate at which work is done is called

a. efficiency

b. effort time

c.

force

d. power

Please select the best answer from the choices provided

Ο Α

ОВ

ОС

Answers

Answer:

The rate at which work is done is power

Name two processes that release nuclear energy?

Answers

Answer:  Nuclear energy is released from an atom through one of two processes: nuclear fusion or nuclear fission. In nuclear fusion, energy is released when the nuclei of atoms are combined or fused together. This is how the sun produces energy. In nuclear fission, energy is released when the nuclei of atoms are split apart.

Let me know if it helps!

Bella wants to know which mode of transportation is the fastest for getting from her home to the grocery store. She can drive her car, ride her bike, walk, or charter a helicopter.
Independent variable
Dependent variable
Controlled variables
Hypothesis

Answers

Based on the question, the following applies:

Independent variable: Time Dependent variable: Mode of transportationControlled variable: Distance traveledHypothesis: IF Bella charters a helicopter, THEN she will get to the grocery store faster.

VARIABLES IN AN EXPERIMENT:

The following are definitions of some variables in an experiment:

Independent variable in an experiment is the variable that is altered or changed by the experimenter. Dependent variable is the variable that is measured or recorded in an experiment. Controlled variable is the variable that is kept constant or unchanged throughout the experiment.

According to this question, Bella wants to know which mode of transportation is the fastest for getting from her home to the grocery store. The following are the variables in this experiment:

Independent variable: Time Dependent variable: Mode of transportationControlled variable: Distance traveledHypothesis: IF Bella charters a helicopter, THEN she will get to the grocery store faster.

Learn more about experimental variables at: https://brainly.com/question/10415158

a ball is thrown vertically up ward with a velocity of 25m/s. a/how fast was it moving after 2sec?​

Answers

Answer:

12.5

Explanation:

given

distance=25

time=2sec

required

=speed

solution

=v=s/t

25/2

=12.5m/s

Is mixing mixing sugar and cinnamon a chemical or physical change?

Answers

Answer:

It is a physical

Explanation:

it is a physical change , u are only mixing them together , not changing their chemical makeup


Why does the blue force have a negative sign?
-20 N
50 N
Because 50 is smaller than 20
Because 20 is smaller than 50
Because it is pointing to the left
Because it is blue

Answers

it’s B (because 20 Is smaller than 50)

The right to gather to advance some political or social cause is known as

Answers

Answer:

the first amendment

Explanation:

the first amendment to the United States constitution allows the freedoms concerning religion, expression, assembly, and the right to gather and petition.

What is Kepler’s first law?

Answers

Answer:

Kepler's First Law: each planet's orbit about the Sun is an ellipse. The Sun's center is always located at one focus of the orbital ellipse. The Sun is at one focus. The planet follows the ellipse in its orbit, meaning that the planet to Sun distance is constantly changing as the planet goes around its orbit.

Answer:

Explanation:

Kepler 's first law - sometimes referred to as the law of ellipses - explains that planets are orbiting the sun in a path described as an ellipse. An ellipse can easily be constructed using a pencil, two tacks, a string, a sheet of paper and a piece of cardboard. Tack the sheet of paper to the cardboard using the two tacks.

How to find the energy in a compressed spring.

Answers

Energy stored in a spring
Work is done when a spring is extended or compressed . Elastic potential energy is stored in the spring. ...
The elastic potential energy stored can be calculated using the equation:
elastic potential energy = 0.5 × spring constant × (extension) 2

write two example in which chemical energy is converted into heat energy ​

Answers

Answer:

batteries in an electric heater, a nuclear power plant

Explanation:

sorry if it wrong g

A 1,500 kg car’s speed changes from 30 m/s to 15 m/s after the brakes are applied. Calculate the work done onto the car from the brakes.

Answers

The work done onto the car is 506,250 J

The work done on a system implies an increase in the internal energy of the system as a result of some forces acting on the system from the outside.

From the parameters given:

The mass of the car = 1500 kgThe initial speed = 30 m/sThe final speed = 15 m/s

The work done onto the car refers to the change in the kinetic energy (i.e. ΔK.E)

[tex]\mathbf{=\dfrac{1}{2} mv_1^2 -\dfrac{1}{2} mv_2^2}[/tex]

[tex]\mathbf{=\dfrac{1}{2} m(v_1^2 - v_2^2)}[/tex]

[tex]\mathbf{=\dfrac{1}{2} \times 1500 \times (30^2 - 15^2)}[/tex]

= 506,250 J

Therefore, we can conclude that the work done on the car is 506,250 J

Learn more about work done here:

https://brainly.com/question/18762601

When did the objects that we now see as asteroids and comets form in the solar system?.

Answers

Answer:

After solid particles condensed from the gas but before the planets finished forming

something about the earth's surface (land or water) changes

Answers

I would say land changes.

PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!


Why are those with low cardiovascular fitness more prone to heart disease than those whose cardiovascular fitness is high?
A.
Exercise decreases the size of arteries, causing heart disease.
B.
Those with lower cardiovascular fitness will have weaker heart muscles.
C.
High cardiovascular fitness means that the heart rate is rarely elevated.
D.
Cardiovascular fitness is the only factor that determines the strength of the heart.


PLEASE NO LINKS OR I WILL REPORT YOU

Answers

People with low cardiovascular fitness are more prone to heart disease than those whose cardiovascular fitness is high because those with lower cardiovascular fitness will have weaker heart muscles. Thus, the correct option is B.

What is Cardiovascular fitness?

Cardiovascular fitness may be defined as the accommodation of the cardiovascular system to furnish oxygenated blood to functioning muscles. It includes the muscles of the heart, lungs, blood vessels, etc.

People with low cardiovascular fitness have lower furnishing of oxygenated blood to various organs like the heart, lungs, etc. Due to this, the muscles of specific body parts or organs may undergo a state of inactivity suddenly for a fraction of seconds.

This activity constantly leads to various heart-related diseases directly or indirectly in the life of an individual.

Therefore, the correct option for this question is B.

To learn more about Cardiovascular fitness, refer to the link:

https://brainly.com/question/11176067

#SPJ1

. Which of the following are forces that push upward on an indoor skydiver? Choose all that apply. *
gravity
acceleration
air resistance
lift


WILL GIVE BRAINLIST

Answers

The forces that push upward on an indoor skydiver are lift force and air resistance.

The forces that act on a skydiver moving downwards includes, gravity due to his weight, air resistance and lift force.

The downward forces on the indoor skydiver include the following;

gravity due to its weightdownward force due its acceleration

The upward force on the indoor skydiver include the following;

lift forceair resistance

Thus, we can conclude that the forces that push upward on an indoor skydiver are lift force and air resistance.

Learn more here:https://brainly.com/question/8947470

1. Look at this data table


What data seems to be inconsistent with the rest? What are 2 different explanations for this data?

Answers

Using visual inspection and knowledge of linear regression , the inconsistent input is the last data point (30, 12.0).

Looking at the data, there is a negative relationship between the depth of water sample and the amount of dissolved oxygen.

As the depth increases, the amount of dissolved oxygen decreases. However, the last data point does not concur with this trend.

This might have been caused by imputation error or error in the measuring device used.

Therefore, the inconsistent data point is (30, 12.0)

Learn more : https://brainly.com/question/25651592

Best definition of an electromagnetic wave?

A) an electromagnetic wave is a longitudinal wave with electricity

B) an electromagnetic wave is a mechanical wave

C) an electromagnetic wave is a transversal wave that has electrical and magnetic properties

Answers

Answer:

Longitudinal and mechanical waves require a medium to support their transmission:

C) is the correct answer

an astronomer looking out into space will observe that

Answers

Answer:

The farther out a galaxy is from Earth, the faster it is moving away.

Explanation:

What is the mass (in kg) of an object which accelerates at 3 m/s^2 when acted upon by a 15 N force?

Answers

Question :-

What is the mass (in kg) of an object which accelerates at 3 m/s^2 when acted upon by a 15 N force?

Required Solution :-

The mass of the object is 5 kg.

Provided that :-

The force applied on object is 15 N The acceleration is 3 m/s²

To Calculate :-

Mass of the body

Using Formula :-

Force = Mass × Acceleration

Calculation :-

[tex]\purple{\longrightarrow \sf Force = Mass \times Acceleration}[/tex]

[tex] \longrightarrow \sf Mass = \dfrac{Force}{Acceleration }[/tex]

[tex]\longrightarrow \sf Mass = \dfrac{15}{3}[/tex]

[tex]\longrightarrow \sf Mass = \cancel{\dfrac{15}{3}} [/tex]

[tex]\longrightarrow {\pink{\underline{\underline{\sf{ Mass = 5 \: Kg }}}}}[/tex]

Henceforth :-

The mass of the object is 5 kg.

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

can someone sent some gravity questions

Answers

What do you mean ???

Answer:

can gravity from waves

Explanation:

yes gravity can froms way

A container on the highway with a round hemispherical end is considered a(n) _________ pressure container.

Answers

Answer:

high pressure container

A container on the highway with a round hemispherical end is considered a(n) High-pressure container.

What is pressure ?

Pressure (symbol: p or P) stands the force involved perpendicular to the surface of an object per unit area over which that force exists distributed. 445 Gauge pressure (even spelled Gage pressure) exists the pressure comparable to the ambient pressure.

Various units exist utilized to represent pressure. Some of these derive from a unit of force separated by a unit of area; the SI unit of pressure, the pascal (Pa), Pressure may also be represented in terms of standard atmospheric pressure; the atmosphere (atm) stands equivalent to this pressure, and the tore exists described as 1⁄760 of this.

Hence, A container on the highway with a round hemispherical end is considered a(n) High-pressure container.

Learn more about High-pressure container refer to;

https://brainly.com/question/9451586

#SPJ2

Other Questions
Presents the relevant parameters to be kept in mind when using the following types of motors: 1. AC induction motor 2. BLDC motor 3. Synchronous motor In your own words, explain how a single molecule of glucose is converted into ~30 or more molecules of ATP in cellular respiration continuous pitches held while other musical lines interweave are called people who have migrated to a different land from where they were born for brainly Identify the slope (rate of change) of the following table or graph. PLEASE HELPCreate a cubic function that is not the parent function. Explain how to graph your cubic function using transformations from the parent function. Be specific in your response and use correct mathematical language. And his friends were gleaming in gold and blue."" Is this line written in iambic pentameter? How does the cell membrane occur in cellular respiration ?. ANSWER THESE QUESTIONS PLZ!! How can economic factors affect environmental issues in a given location or region? How does this impact the lives of those who live in these regions? Are they generally favorable or unfavorable to the economic decisions that may need to be made? What are negative environmental arguments that may be raised against actions that are being taken for primarily economic reasons? You started with $300, and you spent $115 on Jake. You also set aside money to cover the sales tax on $300. Now its your turn to decide exactly what you will purchase with the money you have left. You calculated the costs and best prices for sheets, shoes, dressers, and peaches, but you didnt buy anything yet. Now its time to make your purchases. Make a list of the things you will buy and how much each items cost. Explain your purchasing decisions. PLEASE HELP ME THIS IS FOR MATH AND I AM GOOD AT MATH BUT NOT AT WRITING PLEASE HELP. Can an objects mechanical energy be equal to its gravitational potential energy? A toy car travels down a sloping ramp at constant speed. toy car Which statement about the forces acting on the car is correct? A There are no forces acting on the car vertically. B There is no resultant force acting on the car. C There is no gravitational force acting on the car. D There is no frictional force acting on the car. What is paresthesia? When normalizing, the goal is to decompose relations with anomalies to produce smaller, well-structured relations. True false. Which statement best describes the subject of this poster? It is about the growth of the industrial sector during World War II.It depicts the need for employees to join wartime industries.It is about women joining the workforce during World War II.It depicts the challenges facing women in the workplace. Which of the following was the purpose of the Plantation Act of 1740?a) encourage colonization of foreign born immigrants to the coloniesb) encourage the African slave tradec) encourage indentured servituded) encourage English citizens to leave their country This is the architectural plan for a fenced-in garden.The shaded region represents an area for trees.How long is the fence around the edge of the garden?(Do not include the edge around the tree region.) Why might African American artists sometimes reject the blues played by white artists like Bob Dylan and the Rolling Stones If a Japanese company reported an 8.8 percent increase in net profit from last years 426 billion yen, what would be this years net profit in yen? Type the homograph that could fill both blanks 1. The singer made a low.........to the audience.2. Maria placed a red.........on the birthday gift.