What is the molar concentration of
a solution that contains
5.0 mol HCl in a total volume
of 10.0 L?

Considering the definition of Avogadro's number:

Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.

You can apply the following rule of three, considering the Avogadro's number:  If 1 mole of lithium contains 6.023×10²³ molecules, 2.7 moles of lithium contains how many molecules?

amount of molecules of lithium= (6.023×10²³ molecules × 2.7 moles)÷1 mole

amount of molecules of lithium=1.62621×10²⁴ molecules

Finally, the number of molecules of lithium is 1.62621×10²⁴ molecules.

On the other hand you can apply the following rule of three, considering the Avogadro's number:  If 1 mole of sodium chloride​ contains 6.023×10²³ molecules, 1.8 moles of  sodium chloride​ contains how many molecules?

amount of molecules of sodium chloride= (6.023×10²³ molecules × 1.8 moles)÷1 mole

amount of molecules of sodium chloride=1.08414 ×10²⁴ molecules

Finally, the number of molecules of sodium chloride is 1.08414×10²⁴ molecules.

Learn more about Avogadro's Number:

brainly.com/question/11907018

brainly.com/question/1445383

brainly.com/question/1528951

#SPJ1

The mass number and charge of this atom or ion is 24  and charge +2

The mass number is equals to the total number of protons and neutrons in a nucleus.

In the give question, The number of neutrons is a distractor.

Only the number of electrons versus the number of protons determines ionic charge. The charge of the ion is +2

Hence, The mass number and charge of this atom or ion is 24  and charge +2

Learn more about mass number here ;

https://brainly.com/question/18803094

#SPJ1

The trend in electronegativity values across period 3 from sodium to chlorine is that sodium with 11 protons is the least electromagnetic element and chlorine with 17 protons is the most electronegative element.

It should be noted that electronegativity simply means a chemical property that describes the tendency of an atom to attract elements towards it.

In this case, the trend in electronegativity values across period 3 from sodium to chlorine is that sodium with 11 protons us the least electromagnetic element and chlorine with 17 protons is the most electronegative element.

Learn more about electronegativity on:

brainly.com/question/24977425

#SPJ12

Answer:

185 gms o NaBr

Explanation:

Na Br  mole weight = 22.989 +79.904 = 102.893  gm/mole

1.083 x 10^24  molecules / 6.022 x 10^23 molecules / mole = 1.798 moles

102.893  *  1.798 = 185 gms

The quantitative chemistry is helps in measuring the quantity of chemicals or chemical agents of food while making some dish or cleaning agent. It also helps in determining the quantity of macromolecules in the body, like protein, lipid, etc.

Quantitative chemistry is a branch which tells the quantity  of substances, chemicals. The mass, volume etc. It also helps in determining the molecules and toxic level in the body.

Thus, the quantitative chemistry is helps in measuring the quantity of chemicals or chemical agents of food while making some dish or cleaning agent. It also helps in determining the quantity of macromolecules in the body, like protein, lipid, etc.

Learn more about quantitative chemistry

https://brainly.com/question/4544662

#SPJ1

The enthalpy of the reaction is obtained as 4.876 kJ.

The enthalpy of a reaction is the heat that is absorbed or emitted in a reaction.

Given the reaction; N2(g) + 3H2(g) ⇔2NH3(g);

Number of moles of N2 = 6.44 grams/28 g/mol

= 0.23 moles

If 1 mole of N2 releases 21.2 kJ of energy

0.23 moles of N2 releases 0.23 moles *  21.2 kJ /1 mole

= 4.876 kJ

Learn more about enthalpy:https://brainly.com/question/13996238?

#SPJ1

The concentration (molarity) of the Ca(OH)₂ solution needed to neutralize 31.5 mL of 0.1 M HC₂H302 solution is 0.162M (option D).

The molarity of a solution can be calculated using the following formula:

CaVa = CbVb

Where;

31.5 × 0.1 = 19.4 × Cb

3.15 = 19.4Cb

Cb = 0.162M

Therefore, the concentration (molarity) of the Ca(OH)₂ solution needed to neutralize 31.5 mL of 0.1 M HC₂H302 solution is 0.162M.

Learn more about molarity at: https://brainly.com/question/2817451

#SPJ1

Answer:

=> 119.4597 g

Explanation:

From our question, we have been provided with the molarity of the resultant solution.

We know that, molarity of a solution is contained in 1 L or 1000 cm³ of solution.

Hence we have 1.50 moles in 1000 cm³.

Also, we know that, 1 cm³ equivalent to 1 g for water.

Thus, from our question we have 995 cm³ of water.

Lets now solve our problem;

1.5 moles are contained in 1000 cm³

x moles are contained in 995 cm³

Cross multiply

[tex]x \: moles \: = \frac{(995 {cm}^{3} \times 1.5 \: moles )}{(1000 {cm}^{3} )} \\ = \frac{1492.5 \: moles}{1000} \\ = 1.4925 \: moles[/tex]

1.4925 moles of NH4NO3 are required to be dissolved in water.

To find the mass of solute (NH4NO3) we use the formula;

Mass = RFM (Relative Formula Mass) x Number of moles

[tex] = 80.04 \: \frac{g}{mol} \times1.4925 \: mol \\ = 119.4597 \: g [/tex]

Therefore the mass of NH4NO3 needed to be dissolved in 995 g of water is 119.4597 g

Answer:

119.4597

Explanation:

Acellus

Answer:

They are unstable as single atoms, but can become stable by losing or sharing their one valence electron.

Explanation:

hope it helps you and give me a brainliest

Explanation:

The SI Unit of sound is decibel.

or we can say that

The SI Unit of sound is watt per square metre (i.e.w/m2).

Answer:

Explanation:

#Let's Study

#I Hope It's Help

#Keep On Learning

#Carry On Learning

[tex]\\ \green{MaggieEve}[/tex]

It can be done. Normally the boiling point of water is 100°C. It will boil at temperature greater than 100°C more quickly. Water can be boiled at 95°C but for that the atmospheric pressure of the water should be decreased which will decrease the boiling point of water.

To boil water at 95°C, decrease the atmospheric pressure.

At 105°C, the water will be boiling quickly than normal at 100°C.

The best way is add alcohol .

The common way is that decrease the atmospheric pressure .

This will work as per Boyles law ,and boiling point can be decreased.

but it has few restrictions

Hence there is a spare way

General alcohols like ethanol,butanol can decrease the boiling point of water

Answer:

eheheehehehszndn!jejxxnndrrjrrrfufurururufjththjrjrjdjjjrj\u\ujrjeejrjjjj carbon

Hydrobrome Aicd

I think so...

Answer:

[tex]\fbox {1,2-di bromo pentane}[/tex]

Explanation:

⇒ Bromine atoms present on 1st and 2nd Carbon atoms

⇒ 5 carbon atoms

⇒ Only single bonds

Hence, the IUPAC name will be :

1,2-dibromopentane

The safe house of lean might influence a product owner to provide better customer service.

The safe house of lean is designed to provide ultimate value to the customer one the shortest possible time.

Employing the safe house of lean might influence the product owner in the following two ways:

Therefore, the safe house of lean might influence a product owner to provide better customer service.

Learn more about customer service at: https://brainly.com/question/10714566

#SPJ12

Answer:

Lactose is called milk sugar.

Explanation:

Hope It Helps!!!

Answer:

lactose

Explanation:

credits to the answer above !

3 moles of NaOH reacts with 1 mole of phosphoric acid.

The moles ratio of the reaction between NaOH and Phosphoric acid is given by the equation of the reaction below:

[tex]3\:NaOH + H_{3}PO_{4} \rightarrow Na_{3}PO_{4} + 3\:H_{2}O \\ [/tex]

Based on the equation of the reaction, 3 moles of NaOH reacts with 1 mole of phosphoric acid.

Learn more about mole ratio at: https://brainly.com/question/19099163

#SPJ1

Answer:

113 g NaCl

Explanation:

The Ideal Gas Law equation is:

PV = nRT

In this equation,

    > P = pressure (atm)

    > V = volume (L)

    > n = number of moles

    > R = 8.314 (constant)

    > T = temperature (K)

The given values all have to due with the conditions fo F₂. You have been given values for all of the variables but moles F₂. Therefore, to find moles F₂, plug each of the values into the Ideal Gas Law equation and simplify.

(1.50 atm)(15.0 L) = n(8.314)(280. K)

2250 = n(2327.92)

0.967 moles F₂ = n

Using the Ideal Gas Law, we determined that the moles of F₂ is 0.967 moles. Now, to find the mass of NaCl that can react with F₂, you need to (1) convert moles F₂ to moles NaCl (via the mole-to-mole ratio using the reaction coefficients) and then (2) convert moles NaCl to grams NaCl (via molar mass from periodic table). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units (the desired unit should be in the numerator).

1 F₂ + 2 NaCl ---> Cl₂ + 2NaF

Molar Mass (NaCl): 22.99 g/mol + 35.45 g/mol

Molar Mass (NaCl): 58.44 g/mol

0.967 moles F₂        2 moles NaCl             58.44 g
----------------------  x  -----------------------  x  -----------------------  =  113 g NaCl
                                     1 mole F₂              1 mole NaCl

The daily mean, given the data from the question is 15 °C

Mean = Sumation of data / Number of data

Mean = (20 + 10) / 2

Mean = 30 / 2

Mean = 15 °C

Learn more about statistics:

https://brainly.com/question/8974461

#SPJ12

Answer:

Answer:

Complete combustion

Explanation:

To solve such this we must know the concept of combustion reaction. Therefore the products of complete combustion are carbon monoxide, carbon and water.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved.

There are so many types of chemical reaction reaction like combustion reaction, acid base reaction, double displacement reaction, combustion reactions. The products of complete combustion are carbon monoxide, carbon and water. Large amount of heat is also released in combustion reaction

Therefore the products of complete combustion are carbon monoxide, carbon and water.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ2

CH3COOH

Explanation:

hope I helped

if you get the answer right mark me as brainlyst

Answer:

The "word equation" is Magnesium + Dioxygen → Magnesium Oxide

Explanation: This is also the same as Mg + O₂ → MgO.

Answer:

a) formula for citric acid is - C6 H8 o7

b) lime water turns opaque after adding co2 due to the formation of calcium carbonate.

c) reaction 3 is displacement reaction where a high reactive metal displace a less reactive from its salt solution.

d) reaction 1) is combination reaction where two reactant combines to give a single product whereas reaction 2) is decomposition reaction where a single reactant splits into more that 1 products.

The molar mass of gas is 6.48 g/mol

Graham's law of diffusion states that the rate of diffusion of a gas is inversely proportional to the density of the gas.

The molar mass of Hydrogen gas = 2

R2/R1 = 1.8

Molar mass of gas = 2 × 1.8 × 1.8

Molar mass of gas = 6.48 g/mol

Learn more about Graham's law at: https://brainly.com/question/15476873

#SPJ1

Answer:

Nuclear energy produces radioactive waste

A major environmental concern related to nuclear power is the creation of radioactive wastes such as uranium mill tailings, spent (used) reactor fuel, and other radioactive wastes. These materials can remain radioactive and dangerous to human health for thousands of years.

Explanation:

(1)It is easily reversable, example: the melting of ice.

(2)It produces no new substance example: all cases of melting of solid to liquid.

(3) There is no change in the mass of the substance

example: the magnetization of iron.

(1)It is not easily reversable, example: all cases of burning.

(2) new substance are produced example: rusting of iron.

(3) There is change in the mass of the substance, example : slaking of lime.

Answer:

When zinc reacts with hydrochloric acid, the reaction bubbles vigorously as hydrogen gas is produced. The production of a gas is also an indication that a chemical reaction is occurring.

Explanation:

Explanation:

Hi there!

Chloroethane requires atleast one chlorine in ethane. It's general formula is CnH2n+1Cl. It mean it must have 2 carbons, 5 hydrogens and atleast one chlorine.

In addition, carbon-carbon bond must be single and chlorine is attached to either carbons. The carbon of this compound is SP³ hybridized and has bond angle of 120°.

Hope it helps!