What is the molar volume of a gas at standard temperature and pressure? 1.0 L2.4 L11.2 L22.4 L

Answers

Answer 1

The molar volume of a gas at standard temperature and pressure is 22.4L

Molar volume of a gas at STP

Because the particles in gases are compressible, they can be driven to enclose one another when subjected to high pressure. As a result, the volume of the gas is smaller and there is less free space. The temperature has an impact on gas volume as well. A gas expands as a result of its molecules moving more quickly when it is heated. The comparison of gas volumes must be done at standard temperature and pressure due to the variation in gas volume caused by variations in pressure and temperature. The definition of standard temperature and pressure (STP) is (273.15K) and 1atm pressure. The volume of one mole of a gas at STP is its molar volume. A mole (6.02 x 10^23 typical particles) of any gas takes up 22.4L at STP.

using ideal gas law:-

PV =nRT

P = 1.00atm

n = 1.00 mol

R = 0.0821 L atm/mol  K

T = 273 K

V = ?

V = nRT/P

V = (1.00 x 0.081 x 273)/1.00

V = 22.4 L

To know more about molar volume refer to:-

https://brainly.com/question/24780351

#SPJ10


Related Questions

What happens if you keep thermometer in deep freezer? Why?

Answers

Answer:

Nothing will happen until you remove the thermometer.

Explanation:If the thermometer is made of mercury in glass, nothing will happen….mercury does not freeze at the temperatures in the refrigerator…

nothing will happen,

helpp im timed Part A

Fill a clear glass or resealable plastic bag three-fourths full with water. Place the pencil in the water, and hold it vertically without spilling. Look at the pencil from the side. Describe what you see.
Part B

Tilt the pencil from side to side while continuing to look at it from the side. Describe what you see.

Answers

Any deviation in the image of an object when light passing from one medium to other is assciated to the phenomenon of refraction.

What is refraction ?

It is the deflection from a straight path undergone by a light ray while passing from one medium (such as air) into another (such as glass) in which its velocity is different.


Basically, the light refraction gives the pencil a slight magnifying effect, which makes the angle appear bigger than it actually is, causing the pencil to look crooked.

After Looking at the pencil from the side of a clear glass or resealable plastic bag filled three-fourths with water, we will see the light bends around the pencil, causing it to look bent in the water.

When the pencil tilt from side to side, It looks so dramatically broken on looking at it from different angles.
We can magically “fix” the broken pencil by changing where the pencil is positioned in the glass.

Learn more about Light here;
https://brainly.com/question/22216162

#SPJ1

Answer:

Explanation:

Any deviation in the image of an object when light passing from one medium to other is assciated to the phenomenon of refraction.

What is refraction ?

It is the deflection from a straight path undergone by a light ray while passing from one medium (such as air) into another (such as glass) in which its velocity is different.

Basically, the light refraction gives the pencil a slight magnifying effect, which makes the angle appear bigger than it actually is, causing the pencil to look crooked.

After Looking at the pencil from the side of a clear glass or resealable plastic bag filled three-fourths with water, we will see the light bends around the pencil, causing it to look bent in the water.

When the pencil tilt from side to side, It looks so dramatically broken on looking at it from different angles.

We can magically “fix” the broken pencil by changing where the pencil is positioned in the glass.

What are the five (5) things that can indicate a chemical change has occurred?
Write out the combinations that indicate a chemical change, explain how you know.

Answers

Answer: Bubbles, burning, odor, color change, and rusting.

Explanation: Chemical changes are changes to something that is irreversible.

What conditions make AG always positive?

Answers

Answer: when a reaction absorbs heat or decreases the entropy of the system,

Explanation: :)

PROBLEMS
1. What is the molarity of 4 grams of NaOH dissolved in 1 liter of solution?

2. What is the molarity of 4 grams of NaOH dissolved in 0.5 liter of solution

3. What is the molarity of 4 grams of NaOH dissolved in 0.1 liter of solution

4. Which of the 3 solutions above is more concentrated and why?​

Answers

Answer:

1.) 0.1 M

2.) 0.2 M

3.) 1 M

4.) Solution #3 is the most concentrated because it has the highest molarity. This solution has the largest solute to solvent ratio. The more solvent there is, the lower the concentration and molarity.

Explanation:

To find the molarity, you need to (1) convert grams NaOH to moles (via molar mass from periodic table) and then (2) calculate the molarity (via the molarity equation). All of the answers should have 1 sig fig to match the given values.

Molar Mass (NaOH): 22.99 g/mol + 16.00 g/mol + 1.008 g/mol

Molar Mass (NaOH): 39.998 g/mol

4 grams NaOH           1 mole
----------------------  x  ------------------  = 0.1 moles NaOH
                                 39.998 g

1.)

Molarity = moles / volume (L)

Molarity = (0.1 moles) / (1 L)

Molarity = 0.1 M

2.)

Molarity = moles / volume (L)

Molarity = (0.1 moles) / (0.5 L)

Molarity = 0.2 M

3.)

Molarity = moles / volume (L)

Molarity = (0.1 moles) / (0.1 L)

Molarity = 1 M

Phase change involves changing states of matter (solid-liquid-gas). How do these three states of matter differ from each other? (on a molecular level)

Answers

solid : the molecules are tightly packed

liquid : the molecules have some space in them

gas : molecules can freely move around

Which term describes this reaction?

Answers

Answer:

addition polymerization

Explanation:

Which chemical name is correctly paired with the chemical formula?
tin(IV) bromide, SnBr4
aluminum fluorate, AlF3
iron(II) oxide, Fe2O3
potassium chloride, K2Cl2

Answers

Answer:

Tin bromine = Snbr2

aluminum fluorate = AlFe3

iron oxide = Fe2o3

potassium chloride = KCL or 2KCL = K2CL2

All Pairs are correct

During the distillation nitrogen gas is obtained first, then argon and oxygen. What can u say about the boiling points of these three gases?

Answers

Explanation:

The boiling point of liquid nitrogen, liquid argon, and liquid oxygen are -196°C, -186°C, and -183°C respectively. So, the correct order is nitrogen, argon, oxygen.

Nitrogen:

Since you don't want nitrogen to be condensing everywhere when it gets cold out, elemental nitrogen's boiling point is luckily below zero degrees Celsius. Thank goodness for nitrogen's extremely low boiling point. If it were at zero, boiling water would not produce a lot of heat, necessitating the use of a pressure cooker to prepare foods that typically call for boiling water. Additionally, since the air would be substantially enhanced with oxygen, items may catch fire more quickly (i.e. your home might burst in flame that much more easily). An ugly picture, to be sure.

Argon:

As nonpolar gases, Ar, F2, and Cl2 only display London Dispersion Forces (LDF). These largely negligible forces, which are the product of transient dipoles, must be resisted throughout the boiling process. Since bigger atoms and molecules have valence electrons further from their nucleus, LDF intensity is also directly correlated with atomic or molecular size. Compared to smaller atoms or molecules, these outermost electrons are less attracted to the positive nucleus or nuclei, making it simpler for them to create transient dipoles. As a result, the differing molar masses of each compound—Ar—39.95 g/mol, F—38.00 g/mol, and Cl—70.90 g/mol—can be used to explain the variation in boiling points.

Oxygen:

At 1 atm, oxygen would boil at -183 degrees Celsius if it were a liquid. Although the phase diagram for oxygen is more intricate than this, it is a general phase diagram. Imagine that the term "vaporization" is at the same height as 1 atm, which is roughly halfway up the y-axis. If the y value at that time was equal to 1 atm, the "vaporization" arrow to the right would be directly above -183 degrees Celsius. It's crucial to remember that pressure determines what temperature a substance will boil, melt, condense, or freeze, as you can probably guess. Additionally, the pressure in particular circumstances can affect what phase a material is in.

DESPERATE NEED OF HELP

Answers

Answer:

the answer will be false.

Explanation:

because it is not balanced.

yo i think it is balanced - i did this graph to demonstrate it

The expression caco3 → cao co2 is an example of a reactant. product. chemical equation. chemical progression.

Answers

Chemical equation

What is a chemical equation?The reactants and products of a chemical reaction are represented symbolically in a chemical equation by the appropriate chemical formulas.A chemical equation that illustrates how Calcium oxide (quicklime) and carbon dioxide are produced during the breakdown of limestone.

       CaCo3 → CaO+ CO2      (Decomposition reaction)

The portion of the chemical equation on the reactant side is to the left of the symbol "→," and the portion on the product side is to the right of the arrow symbol.Decomposition reaction:-

A chemical reaction that results in the breakdown of one reactant into two or more products is known as a decomposition reaction.

Learn more about  Chemical equations here:-

https://brainly.com/question/5880605

#SPJ4

Answer:

chemical equation

Explanation:

How many miles of silver will be generated if 1.30 miles of zinc is placed into silver nitrate solution

Answers

2.60 moles.

Zn (s) + 2 Ag+ (aq) --> 2 Ag (s) + Zn2+ (aq), each mole of zinc gives out two moles of silver. Therefore, 1.30 moles of zinc will displace 2.60 moles of silver. ( 1.30 × 2)

More about silver nitrate:

An inorganic substance with the chemical formula AgNO3 is silver nitrate. This salt serves as a flexible base for numerous different silver compounds, including those employed in photography. Compared to halides, it is far less light-sensitive. Lunar caustic was previously the name given to it since early alchemists referred to silver as luna and connected it to the moon.

Learn more about silver here:

https://brainly.com/question/8071605

#SPJ4

Which of the following questions would be answered by performing a scientific experiment?
A.
What type of food is the most enjoyable?
B.
What type of food is the most nutritious?
C.
What type of food looks the best?

Answers

the answer would be (B)

Which phrase describes a homogeneous catalyst?

Answers

Answer:

It is in the same phase as the reactants.

Explanation:

i took the test

Did you write these compounds?
KBr
2 NH₂OH
2HNO3

Answers

The missing components of the neutralisation reaction include the following:

KBr KBr 2NH4OHKBr 2NH4OH2HNO2

What is neutralisation reaction?

Neutralisation reaction is defined as the type of reaction that leads to the formation of salt and water when an acid and a base reacts.

From the reactions given the missing components are replaced as follows:

HBr + KOH --> KBr + H2O

H2SO4 + 2NH4OH --> (NH4)2SO4 + 2H2O

2HNO3 + Mg(OH)2 --> Mg(NO3)2 + 2H2O

Learn more about acids here:

https://brainly.com/question/26353151

#SPJ1

60 ml of a 1.0 m solution of h2so4 is mixed with distilled water to make 1 l of solution. what is the molarity

Answers

Answer:

0.057 M

Explanation:

To find the new molarity, you need to (1) find the moles (via the molarity equation using the old molarity and volume) and then (2) calculate the new molarity (via the molarity equation using the combined volume and old moles).

(Step 1)

60 mL / 1,000 = 0.06 L

Molarity (M) = moles / volume (L)

1.0 M = moles / 0.06 L

(1.0 M) x (0.06 L) = moles

0.06 = moles

(Step 2)

0.06 L + 1 L = 1.06 L

Molarity (M) = moles / volume (L)

Molarity = 0.06 moles / 1.06 L

Molarity = 0.057 M

A year has 365 day and a day has 24 hours. if an hour has 60 minutes and a minute has 60 seconds how many seconds are in a year

Answers

Answer:

31536000

Explanation:

There are 31536000 seconds in a day.

60s x 60min x 24hrs x 365 days = 31536000sec

The energy of a photon from certain wavelength is 1.37 x 10^-20 j, what is the frequency in hz?

Answers

Answer:

frequency = 2.07 x 10¹³ Hz

Explanation:

To find the frequency of the photon, you need to use the following equation:

E = hv

In this formula,

-----> E = energy (J)

-----> h = Planck's Constant (6.626 x 10⁻³⁴ J*s)

-----> v = frequency (Hz)

Since you have been given values for two of the variables (in the correct units), you can plug them into the equation and simplify to find the frequency.

E = hv                                                       <----- General Equation

E = (6.626 x 10⁻³⁴ J*s)v                           <---- Plug in Planck's Constant

1.37 x 10⁻²⁰ J = (6.626 x 10⁻³⁴ J*s)v        <----- Plug in energy (given)

2.07 x 10¹³ = v                                        <----- Divide both sides by 6.626 x 10⁻³⁴

What is a spring tide? When and why does it occur?

Answers

A spring tide occurs when there is a new or full moon in the solar system.

What is Spring tide?

This is the type of tide which occurs when the sun, moon and earth are in line and occurs between three to four times per year.

Lunar and solar tides also line up and reinforce each other to produce this type of tide.

Read more about Spring tide here https://brainly.com/question/11545040

#SPJ1

Help pls!!
The table compares the number of electrons in two unknown neutral atoms.
Comparison of Electrons
Atom Number of Electrons
A 10
D 11
Use this information to determine the number of valence electrons in the atoms. Which of the following correctly compares the stability of the two atoms?

A Both are unreactive.
B Both are highly reactive.
C A is unreactive and D is reactive.
D A is reactive and D is unreactive.

Answers

Answer: A is unreactive and D is reactive.

Explanation:

A is neon, which is a noble gas, and thus unreactive.

D is sodium, which is an alkali metal, and thus highly reactive.

What is the weighted average of a
bean in the sample data given?
Sample Number
of Beans
Black
Eyed Peas
Cannellini
Beans
410
90
Abundance Mass
(%)
(g)
1.32
82
18
2.94
Weighted
Average (g)
[?]

Answers

Answer: 1.6116

Explanation:

[tex](1.32)(0.82)+(2.94)(0.18)=\boxed{1.6116}[/tex]

The weighted average of a bean in the given sample data is equal to 1.6116 g.

What is the Weighted Average?

The weighted average can be described as a calculation that takes into account the varying degrees of importance of the numbers in a data set. Each number is multiplied by a predetermined weight in the given data set before the final calculation is made in calculating a weighted average.

A weighted average assigns weights that calculate in advance the relative abundance of each data point. A weighted average is commonly determined to equalize the frequency of the values in a data set.

Given the abundance of Black eyes peas, m₁ = 82% = 0.82

The mass of the Black eyes peas, W₁ = 1.32 g

the abundance of cannellini beans, m₂ = 18% 0.18

The mass of cannellini beans, W₂ = 2.94 g

The weighted average = m₁W₁ + m₂W₂ = 1.32× 0.82 + 2.94 ×0.18

The weighted average of a bean = 1.6116 g

Therefore, the weighted average of a bean in the sample is 1.6116 g.

Learn more about the weighted average, here:

https://brainly.com/question/18205277

#SPJ2

HELP FAST!!!!!!!
Which two groups have the same functional group?
O A. Amines and alcohols
B. Aldehydes and esters
C. Ketones and aldehydes
D. Esters and ethers

Answers

Answer:

C. Ketones and aldehydes

Explanation:

they are both carbonyl functional group

they both have a carbon-oxygen double bond

testosterone is an example of a ketone

formaldehyde is an example of a aldehyde

opentextbcca

wikipedia

Answer:

Ketones and Aldehydes

Explanation:

i just took tha test

NiSe2 + Ca3(PO4)2 = Ni3(PO4)2 + CaSe

balance please

Answers

3Ni + Sn3(PO4)2 → Ni3(PO4)2 + 3Sn I think. Not for sure though

the volume of a 300 L sample of CO2(g) at 2.30 atm is compressed to 29.6 L, what
is the new pressure at constant temperature and moles?

Answers

Answer:

23,31 atm

Explanation:

p1v1 = p2v2

2.3 * 300  = p2 *29.6

p2=23.31 atm

Considering the combustion reaction of propane again, what mass of propane (C3Hg) is necessary to react with 4.53 g of oxygen? C3H8 +5023CO₂ + 4H₂O 0.0256 g C3H8 1.13 g C3H8 1.25 g C3H8 2.50 g C3H8

Answers

Answer:

1.25 g C3H8

Explanation:

edge lol

Please help asap! giving brainliest to correct answer!!

which pair of compounds has the same empirical formula? (5 points)

select one:

a. c3h8 and c3h
b. c2h2 and c2h
c. c4h10 and c6h
d. c4h10 and c2h5

Answers

Answer:

D. C₄H₁₀ and C₂H₅

What is a empirical formula?

A chemical formula indicating the elements of a compound and their relative proportions, as (CH₂O)n.

Since an empirical formula indicates the ratio (proportions) of the elements in the compound, it can be used, along with the molar weight of the compound, to determine the molecular formula.

The empirical formula provides the smallest whole-number ratio among elements or compounds within a molecular compound. A compound is a chemical formed from atoms of different chemical elements.

Hence, Option D is correct.

#SPJ2

10. What are the four steps in the scientific method?

Answers

observation, formulation, testing hypothesis, and establishing the theory

How many moles of propane
react when 294 g of CO2 form?

C3H8 +502 3CO2 + 4H₂O

?] mol C3H8

Answers

Starting mass: 294
Mass ratio: 3/5

Determine if the following statement is true or false, and why. “A hypothesis can be proven true.”
A. False, it should read “A hypothesis can only be proven false.”
B. True
C. False, it should read “A hypothesis cannot be tested.”
D. False, it should read “A hypothesis can’t be proven true if it is falsifiable.”

Answers

it's true. answer is B.

a hypothesis is a stage before formation of theory. so when we put forward a hypothesis to prove something (in scientific observation) it can be proven true with the experiments conducted.

but of course it's can be proven wrong too, after the experiments conducted. then it is disregard.

a proven hypothesis (a true hypothesis)is the reason for theories.

Answer:

it's true. answer is B.

a hypothesis is a stage before formation of theory. so when we put forward a hypothesis to prove something (in scientific observation) it can be proven true with the experiments conducted.

but of course it's can be proven wrong too, after the experiments conducted. then it is disregard.

a proven hypothesis (a true hypothesis)is the reason for theories.

Explanation:

hope this helps :)

A is a solution containing 3.5g of HX per dm-³. B is a solution containing 0.050moldm-³ of an hydrous sodium trioxocarbonate (IV) of solution 25cm³ portions of solution B required an average of 26.10cm³ of Solution A for complete neutralization. From this results, calculate

1. The Molar Concentration Of A

2. The Relative Molar Mass Of A

Equation For The Reaction 2HX + Na2CO3 ---> 2NaX + H2O + CO2

Brainliest!! ​

Answers

The Molar Concentration Of A =0.099 .

The Relative Molar Mass Of A = 35.0129 gm

Given,

Mass of HX = 3.5 g

Moles of solution B ([tex]Na_{2} CO_{3}[/tex]) = 0.05 moles

Volume of HX = 26.10 mL

Volume of Solution B = 25 mL

Molecular weight of solution B = 2(atomic weight of Na )+ atomic weight of C + 3(atomic weight of O)

                 = 2(23) + 12 + 3(16)

                 =106 gm

Equivalent weight of  [tex]Na_{2} CO_{3}[/tex] = molecular weight / 2 = 106 /2  =53 g

Mole = mass / molecular weight

∴0.05 = mass / 106

∴ mass = 5.3 gm [tex]Na_{2} CO_{3}[/tex]

Normality = mass ÷ (equivalent weight × volume of the solution in liter)

                = 5.3 ÷( 53 × 0.025)

                =4 N

So, by using formula ,

[tex]N_{1} V_{1} =N_{2} V_{2}[/tex]

[tex]N_{1}[/tex] = normality of solution B = 4 N

[tex]V_{1}[/tex] = volume of solution B = 25 mL

[tex]N_{2}[/tex] = normality of solution A = ? N

[tex]V_{2}[/tex] =Volume of solution A = 26.1 mL

∴ 4×25 = [tex]N_{2}[/tex] × 26.1

∴[tex]N_{2}[/tex] = 3.83 N

∴ normality of solution A = 3.83 N

from Formula of the normality we can find the equivalent weight of the A

Normality = mass of HX ÷ (equivalent weight × volume of the solution in liter)

3.83 = 3.5 ÷( equivalent weight × 0.0261)

equivalent weight = 35.0129 g

In case of HX the electron transfer is 1 ,so equivalent weight = molecular weight ; which is also termed as relative molar mass in given case.

∴The Relative Molar Mass Of A = 35.0129 g

Molar concentration = mass / molar mass

                               = 3.5 / 35.0129

                               = 0.099 mole

∴ The Molar Concentration of A  is 0.099 .

Learn more about Normality here...

https://brainly.com/question/1685497

#SPJ10

Other Questions
Which questions would most help a reader identify the author's purpose for writing? Select three options.What type of text is this?What type of reviews did the book receive?How many copies of the book have been sold?What is the ceral idea?How does this text make one feel? The number of measles cases has increased by 5.3% since 2000.Express your answer rounded correctly to the nearest hundredth.Stated another way, the number of measles cases is times what it was in 2000.Express your answer rounded correctly to the nearest tenth of a percent.Stated another way, the number of measles cases was % of what it is now. I want to know the answer quick After completion of the citric acid cycle, most of the usable energy from the original glucose molecule is in the form of __________. Mary Lou received $5,000 from her grandparents for her college education 8 years prior to her enrolling in college. Mary Lou invested the money at 5.5% compounded semiannually. How much money would she have in her savings account when she is ready to enroll in college? A: The balance in her account would be $__________ when she is ready to enroll in college. (Round your answer to the nearest cent.) the screenshts below As the amount of alcohol in your body increases Identify the structure below: A , B, and C Solve the equation 7(w +13) = 35.) What is the value of w? Which term best describes the use of aggregate variance data to change a system of health care practice An administrator is asked to file papers in a box which has the following dimensions height 15cm width 30cm and depth 20cm. Calculate the volume of the box. Our solar system is more than _________ in diameter. Given the graph, find the initial value of the domain [ ___, 2]. I will mark brainliest PLEASE HELP ASAP!!!!What is the rectangular equivalence to the parametric equations?x()=3cos+2,y()=2sin1 , where 0 What is the measure of the apothem, rounded to the nearest hundredth of a centimeter? Santiago was excited to find out that he was accepted at the college of his choice, but knew that he would need financial aid to pay for it. Luckily, he was approved for a government grant. What does this mean for Santiago How were the two periods of colonization the same, and how did they differ? Which ONE of the following ideas does NOT particularly describe political culture? Select one:a.Effects on a countrys government structure and political decisionsb.Beliefs about economic lifec.Shared beliefs, values, and norms that define the relationship between citizens and government, and citizens to one anotherd.Freedom to pursue a better life What are the drawbacks for karnali province as it doesn't comprise any land of terai