What is the oxidation number of the manganese atom (Mn) in this compound?
MnO₂
+2
O +4
O4

Following are the match-ups of different milkfats.

Whole milk (3.25% milk fat), reduced-fat milk (2%), low-fat milk (1%), and fat-free milk, sometimes known as skim milk, are the four main forms of milk that are readily available. Each one has 8 grammes of high-quality protein and 13 other necessary elements. The quantity of fat in each type of milk, expressed as a percentage of milkfat, varies. To display the milkfat at a glance, these percentages are mentioned on the box and via the various cap colours.

All milk, including fat-free, low-fat, organic, and lactose-free varieties, remains a naturally nutrient-rich, straightforward, and healthful food. However, the amount of milk fat does impact the number of calories and fat in each serving.

To learn more about Milkfat from given link

https://brainly.com/question/29942756

#SPJ4

The reaction would go left under increased pressure.

Though the question is incomplete and I can't find the complete answer online, I can try to give you an overview about the reaction. If we look at this reaction we can see that it is a reversible reaction.

We then know that the conditions of the reaction is what is going to determine the direction that the reaction is going to go in the system. Given the fact that we have more volumes on the left than on the right, the reaction would move to the left if the pressure is increased.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

The  most probable values for the first four ionization energies of the aluminum are : IE₁ = 578 kJ/mol, IE₂ = 1817 kJ/mol, "IE₃ = 2745 kJ/mol", IE₄ = 11577 kJ/mol.

The ionization energy is the amount of the energy required to remove the electron from an atom. The electronic configuration of Al is given as :

Al electronic configuration = 1s² 2s² 2p⁶ 3s² 3p¹. The fourth ionization energy is comparatively high because the 2p subshell is fully filled and the energy required to remove the electron from the stable electronic configuration will be high. Therefore, the fourth ionization energy is high.

To learn more about ionization energy here

https://brainly.com/question/29629534

#SPJ4

Given that ether is a more polar solvent than n-alkanes, it is anticipated that it will be more competitive in interactions of the dipole-type and as a hydrogen-bond base.

To learn more about polar solvent refer to:

https://brainly.com/question/3184550

#SPJ4

The chemical equation which has the given mole ratio is 2 Al + 6 HCl → 2 AlCl₃ + 3 H₂.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

Instead of Fossil Fuels to generate power, nuclear energy uses Uranium. Therefore, among all the given options, the correct option is option C.

Any of a group of hydrocarbon-containing compounds of biological origin that are found in the Earth's crust and may be utilized as a source of energy are known as fossil fuels.

Coal, petroleum, oil and gas, oil shales, bitumen, tar sands, other heavy oils are examples of fossil fuels. Even before Devonian Period (419.2 to 358.9 million years ago), the majority of carbonaceous material came from algae and bacteria, but the majority of carbonaceous material that formed during and after that time came from plants. Instead of Fossil Fuels to generate power, nuclear energy uses Uranium.

Therefore, among all the given options, the correct option is option C.

To know more about Fossil Fuels, here:

https://brainly.com/question/29770775

#SPJ2

If the two substituents are on the same side of the double bond, the bond has a cis conformation. From the diagram below, B, D, and E only have the cis configuration.

If the two substituents are on the opposite sides of the double bond, the double bond has a trans configuration. In the context of chemistry, trans denotes that the functional groups (substituents) are on the same side of some plane, whereas cis implies that they are on the other (transverse) side. The same plane contains all six atoms. The cis isomer has two "X" and "Y" groups on the same side of the double bond. In the trans isomer, the "X" and "Y" groups are situated on opposite sides of the double bond. They do not interconvert because there is no rotation around the bond.

To learn more about isomers click here https://brainly.com/question/12796779

#SPJ4

complete question: which of the following compounds are drawn in the cis configuration? 1.D only 2. B only 3. B, D, and E only 4. A and B only

The properties of a square are;

We know that a square is one of the types of the quadrilaterals that we have in mathematics. The implication of this is that the square would have four sides.

If the square has four sides then it is possible that we can be able to draw a diagonal that would run from one point to the other across the square and this can be said for all the quadrilaterals. This is how now know the square.

Hence, the square can be said to be a quadrilateral figure.

Learn more about square:https://brainly.com/question/20377250

#SPJ1

The correct relationship between the three values will be the value for nitrogen is greater than that of P because N is smaller, but less than that of O because N has a smaller effective nuclear charge.

Electronegativity is the chemical property which describes the tendency of an atom or a functional group which attract electrons toward itself. The electronegativity of an atom will be affected by both its atomic number as well as the distance that its valence electrons reside from the charged nuclei.

The  electronegativity of phosphorus will be 2.19 is much less  electronegativity than to the nitrogen. The electronegativity of nitrogen will be 3.04. 4. Phosphorus will expand its valence shell to hold more than eight electrons, but nitrogen cannot.

To know more about electronegativity here

https://brainly.com/question/17762711

#SPJ4

A heterogenous mixture is composed of two or more types of matter that can be present in varying amounts.

Heterogenous mixtures is defined as a type of mixture where in the composition is not uniform throughout the mixture.It consists as two or more phases. The phases are chemically distinct from each other.

As there are two or more phases present in heterogenous mixtures they can be separated by solvent extraction where in one phase is miscible with the solvent and the other phase is immiscible.

Components of a heterogenous mixtures are distinctly visible . There are two types of heterogenous mixtures, the colloids and the suspensions.These two vary with each other with respect to particle size.

Learn more about heterogenous mixtures,here:

https://brainly.com/question/29207752

#SPJ1

The following is the right procedure to find out molecular formula of the compound these are steps:

Take the grams of carbon, hydrogen, and oxygen and use them to calculate the empirical formula of the chemical. To find n, multiply the given molecular mass by the empirical formula mass and then compute the formula mass for the empirical formula. The molecular formula is obtained by multiplying each of the empirical formula's subscripts by n.

Do the empirical formula's molar mass calculations. Molecular mass determined using the empirical formula divided by the molecular mass provided. Add the entire number that was generated in step 2 to each subscript. The molecular equation is now this.

The molecular formula is obtained by multiplying each of the empirical formula's subscripts by n.      

To learn more about molecular formula refer to:

brainly.com/question/26388921

#SPJ4

It takes 8,350 joules of heat, or 2,000 calories, to melt 25 grams of ice.

Examples:

To melt 25 grammes of ice, how much heat, in Joules, is needed? The heat in calories is what?

334 J/g = 80 calories per gramme of food containing water.

Solution

Heat of fusion is specified in the problem. Not off the top of your head knowledge, this is not a number. Common values for the heat of fusion are listed in chemistry tables.

You will need the equation relating heat energy to mass and heat of fusion in order to tackle this issue:

When q = heat energy and m = mass, q = mHf.

The heat of fusion is Hf.

Since it is unaffected by a change in matter's condition, temperature is not a factor in the equation. Making sure you are using the appropriate units for the answer is crucial because the equation is quite simple.

Converting heat into Joules:

q = (25 g)x(334 J/g)

q = 8350 J

In terms of calories, it's equally simple to describe the heat:

q = m·ΔHf

q = (25g)x(80cal/g)

q = 2000 cal

Answer: It takes 8,350 joules of heat, or 2,000 calories, to melt 25 grammes of ice.

To Learn more About   joules of heat  Refer To:

https://brainly.com/question/25603269

#SPJ1

Explanation:

Hydrogen bonding is a type of noncovalent interaction between molecules or within a molecule in which a hydrogen atom is attracted to a highly electronegative atom, such as nitrogen, oxygen, or fluorine. The bond is formed between the partial positive charge on the hydrogen atom and the partial negative charge on the other atom.

An example of hydrogen bonding is the interaction between the hydrogen atoms in the molecule of water, H2O. In the water molecule, each hydrogen atom is bonded to an oxygen atom. The oxygen atom is more electronegative than hydrogen, which means it has a stronger pull on the electrons in the bond. This creates a partial negative charge on the oxygen atom, and a partial positive charge on the hydrogen atoms. These partial charges allow for the formation of hydrogen bonds between the hydrogen atoms of one water molecule and the oxygen atoms of another water molecule. This is what gives water its unique properties, such as high boiling point, high surface tension, and high heat of vaporization.

Answer:

Rewrite the equation in standard form.

C3H8 + 5O2 ==> 3CO2 + 4H2O.

2. Convert 8.5 x 10^22 molecules proper into molecules . Remember 1 mole contains 6.02 x 10^23 molecules.

3. Using the confficients in the balanced equation, convert moles propper to moles H2O.

4. Convert mols H2O to grams. g = moles x molar mass.

If you start with 0.75 moles of C₃H₈, you would produce 54 grams of H₂O.

Moles (mol) are a unit of measurement used to express the amount of a substance. One mole of a substance is defined as the amount of that substance that contains the same number of particles (atoms, molecules, or ions) as there are atoms in exactly 12 grams of carbon-12. This number is known as Avogadro's number, which is approximately 6.022 x 10²³ particles per mole.

The mole is used to relate the mass of a substance to its chemical formula and to perform stoichiometric calculations.

The balanced equation is:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

From the equation, every 1 mole of C₃H₈, 4 moles of H₂O are produced.

Moles of H₂O = (0.75 moles C₃H₈) x (4 moles H₂O / 1 mole C₃H₈)

= 3 moles H₂O

Mass of H₂O = (3 moles H₂O) x (18 g/mol)

= 54 g

Learn more about Moles, here:

https://brainly.com/question/15209553

#SPJ6

Answer:Good question!! I’ll try to help you the best I can!

First off, you have to know that acetone has a density of 0.7857 g/cm^2

You also need to know that 1mL = 1cm^3

Once you know that, the rest is pretty easy you’ll see! The next step is a cross product to find out how many cm^2 are in 6.72g :

0.7857 g → 1 cm^3

6.72 g  cm^3

(1 * 6.72) ÷ 0.7857 = x

6.72 ÷ 0.7857 =x

8.55

Which means that for 6.72g of acetone, you have a volume of about 8.55cm^3.

Finally, since we’ve established in the beginning that 1cm³ = 1mL, it’s easy to answer your question!

The volume, in millilitres, of 6.72g of acetone is about : 8.55mL

There you go, I really hope this helped, if there’s anything just let me know!

Explanation:

Answer: False

Explanation:

Except for a few substances like carbonates, carbides, cyanides, and cyanates, every molecule that includes carbon and hydrogen is considered to be organic. A molecule need not include nitrogen to be regarded as organic.

Amino acids, proteins, and nucleic acids are examples of organic molecules that include both carbon and nitrogen. However, not all organic substances contain nitrogen. The most prevalent organic substances are hydrocarbons and their derivatives, which are made up entirely of hydrogen and carbon.

It is essential to remember that the term "organic" is used in various settings and denotes various things depending on the industry.

While "organic" refers to items produced without the use of synthetic pesticides, fertilizers, or other chemicals in agriculture and food science, the term "organic" is used to designate substances that include carbon and hydrogen in chemistry.

The amount of medication required in grams per pound of body weight is 0.00363 g/lb.

The conversion factor between pounds and kilograms is given below:

1 kg = 2.20462 lb

The data given is as follows:

The prescription medication requirement  = 8.00 mg/kg

We use the conversion factor to convert the given amount to grams per pound of body weight.

1 kg = 2.20462 lb

1 g = 1000 mg

Hence;

8.00 mg = 8.00 * 1 g/1000 mg

8.00 mg = 0.008 g

The given amount of medication required in grams per pound of body weight = 0.008 g / 2.20462 lb

medication required in grams per pound of body weight = 0.00363 g/lb

Learn more about pounds and kilograms at: https://brainly.com/question/29761698

#SPJ1

Complete question:

A prescription medication requires 5.98 mg per kg of body weight. Convert this quantity to the number of grams required per pound of body weight.  Express your answer to three significant figures.

For the question asked, the correct option is (D) i.e. 1.8 standard deviations higher in pH than the typical rainfall.

A z-score is a measure of how many standard deviations a particular data point lies from the mean of a normal distribution. If the pH of the rainwater after last week's storm has a z-score of 1.8, this means that the acidity of the rain was 1.8 standard deviations higher than the mean acidity of average rainfall. It is important to note that the pH scale is logarithmic, so a change of one unit in pH represents a ten-fold change in acidity. Therefore, a change of 1.8 units in pH represents a ten-fold change raised to the power of 1.8, which is a substantial increase in acidity.

To know more about pH please refer: https://brainly.com/question/29766400

#SPJ4

By -320 pM, we need to increase the source power. A fluorescent material begins to produce visible light when energy is absorbed as a result of the incidence of X-rays, light waves, and electrons.

When a substance generates electromagnetic waves inside the longer wavelength range and makes them visible to the human eye, it is a fascinating occurrence. Let's first define fluorescence in order to comprehend this. This allows the substance to gently transition from the partly excited state to the ground state. Fluorescence is the term for this phenomena.

Detection limit = 3 × noise / signal to noise ratio

Detection limit  = 3× 75 pM / 5 = 15 pM

Source power = (noise / desired detection limit)² × current source power

Source power = (15 pM / 75 pM)² ×500 pM

                      = 0.36 ×500 pM

                       = 180 pM

Source power= 180 pM - 500 pM =

                       =-320 pM

Therefore, -320 pM, we need to increase the source power.

To know more about fluorescence, here:

https://brainly.com/question/14742655

#SPJ1

The heat absorbed or released during a phase shift or chemical reaction at constant pressure is what option a, in terms of equations, best describes the enthalpy change of a system.

To learn more about enthalpy change refer to:

https://brainly.com/question/14047927

#SPJ4

A solid that appears when aqueous naoh is added to an al3-containing solution; however, the solid dissolves as more naoh solution is added. due to the amphoteric nature of aluminium.

which allows it to react with both bases and acids. Aluminium ions are eager to accept two electrons because of how acidic they are. The chemical element aluminium, also known as aluminium in American and Canadian English, has an atomic number of 13 and the symbol Al. Aluminium is less dense than most common metals, with a density around one third that of steel. an electric charge Having a negative charge, an electron is a particle. The negative charge is 1.602 10-19 coulomb in magnitude. A proton's mass is 1/1837 that of an electron.

Learn more about  atomic number here

https://brainly.com/question/16858932

#SPJ4

The elements that have incomplete shells are Zinc (Z = 30), Argon (Z = 18).so, option (b) (c) is correct.

What is element ?

A crucial component of a whole. a simple substance that cannot be divided into smaller components or transformed into another substance is referred to as in chemistry. Atoms, which are made up of protons, neutrons, and electrons, are the building blocks of an element. One element has a fixed number of protons in each of its atoms.

What is shell?

An atom's outermost region, which surrounds the atomic nucleus, is known as the electron shell. It consists of a collection of atomic orbitals with the same value of the fundamental quantum number, n. One or more sublevels, or electron subshells, exist within electron shells.

Therefore, elements that have incomplete shells are Zinc (Z = 30), Argon (Z = 18).so, option (b) (c) is correct.

Learn more about elements from the given link.

https://brainly.com/question/6258301

#SPJ4

Answer:

D. The temperature remains at 0°C until the change of state is complete.

Option C is the right response since a hydrogen bond is a specific type of dipole-dipole link. A hydrogen bond, also known as the intermolecular force, produces a particular type of dipole-dipole attraction (IMF).

when two electronegative atoms that are connected by hydrogen bond to a strongly electronegative atom are nearby, one of them having a lone pair of electrons. Intermolecular forces, or IMFs, exist between molecules. The phrase "intermolecular forces," or "IMF," refers to the attractive and repulsive forces that form between the molecules of a substance. Through the use of these forces, certain molecules of a substance communicate with one another. The attraction between two hydrogen atoms known as a hydrogen bond (or H-bond) in chemistry is primarily brought on by electrostatic forces (H)

Learn more about hydrogen bond here

https://brainly.com/question/21054466

#SPJ4

Na>Al>S>Cl is the order in which the atomic sizes of the above elements decrease. We shall arrange the four specified elements in decreasing atomic radii order since they are all within the same time period.

Atomic radii in the periodic table decrease across a row from left to right and increase across a column from top to bottom. Due to these two patterns, the periodic table's lower left and upper right corners, respectively, contain the largest and smallest atoms. You can use the periodic table to keep track of broad principles or "trends" that are shown on the table. One such pattern is the atomic radius.

To learn more about atomic radii click here https://brainly.com/question/14086621

#SPJ4

Answer:

the organs of sexual reproduction is the flower. male gametes is found in pollen grains and produced in the anthers of the flower. female gametes i found in ovules and produced inthe ovary of the flower.

A formal charge is a hypothetical charge that is assigned to an individual atom in a polyatomic molecule.

The formal charge is the charge to an individual atom in a polyatomic molecule or the ion. The example of the formal charge is given below as:

Formal charge in carbon dioxide , CO₂ :

The formal charge = valence electrons - non bonding electrons - bonding

                                                                                                           electron/2

Formal charge of Carbon atom = 4 - 0 - 8/2

                                                      = 0

Formal charge on oxygen atom 1 = 6 - 6

                                                       = 0

Formal charge on oxygen atom 2 = 4 - 4

                                                         = 0

The given question is incomplete, I gave general answer according to my knowledge.

To learn more about formal charge here

https://brainly.com/question/11723212

#SPJ4

F: All of the above. When using gloves as personal protective equipment, it is important to follow all of the procedures listed:

A) Wear gloves of a material known to be resistant to permeation by the substances in use,

B) Remove gloves before handling objects such as doorknobs, telephones, pens, and computer keyboards,

C) Decontaminate or wash gloves before removing them,

D) Inspect gloves for small holes or tears before use,

E) Replace gloves periodically, depending on the frequency of use.C: Should never be reused. Latex gloves should never be reused as they may have been contaminated and may not provide sufficient protection. It is recommended that gloves are changed frequently to ensure safety.

To learn more about personal protective equipment here:

https://brainly.com/question/17663098

#SPJ4

There are 1000 g in one kg. It is a correctly reflect the relationship between SI units and units containing decimal prefixes.

What is meant by SI units?

To learn more about SI units refer to

https://brainly.com/question/18779569

#SPJ4

In the field of chemistry known as stoichiometry, the goal is to ascertain the needed quantitative data by using relationships between the reactants and/or products of a chemical process.

The complete question is,

Suppose you set the initial masses so that both reactions result in PCl3. Describe how the laws of definite and definite obeyed in both of these chemical reactions.

To learn more about stoichiometry refer to:

https://brainly.com/question/14935523

#SPJ4