What is the percent by weight (w/w%) of sugar in soda? Assume the average mass of sugar in soda is 23.0 g and the total mass is 370.0 g.

Answer:

I am almost positive that it is D. I might be incorrect do i appoligise if i am.

Explanation:

Answer:

A

Antoine-Laurent Lavoisier

:D

The scientist was most essential to the use of radioactive isotopes in medicine is " John Lawrence's".

The radioactive isotopes of such an element were called radioisotopes. Atoms that have too much energy in their nucleus or even an unstable neutron-proton pair.

It marked the beginning of John Lawrence's lengthy career of service and the first time a radioactive isotope had already been employed in the management of a human illness. His laboratory is regarded as the origin of nuclear medicine, for which he is regarded as its father.

The scientist most essential to the use of radioactive isotopes in medicine is " John Lawrence's".

To know more about radioactive isotopes.

https://brainly.com/question/1907960

#SPJ3

Answer:

Microscopes and telescopes often use two lenses to make an image large enough to see. A compound microscope uses two lenses to achieve high magnification. Both lenses are convex, or converging. Light from the object first passes through the objective lens.

Explanation:

A compound microscope uses two lenses to achieve high magnification

Answer:

8 × 10³ mol N₂

Explanation:

Step 1: Write the balanced equation

2 C₃H₅N₃O₉ ⇒ 6 CO₂ + 5 H₂O + 0.5 O₂ + 3 N₂

Step 2: Convert the mass of C₃H₅N₃O₉ from tons to grams

We will use the conversion factor 1 t = 907185 g.

1.320 t × 907185 g/1 t = 1.197 × 10⁶ g

Step 3: Calculate the moles corresponding to 1.197 × 10⁶ g of C₃H₅N₃O₉

The molar mass of C₃H₅N₃O₉ is 227 g/mol.

1.197 × 10⁶ g × 1 mol/227 g = 5.27 × 10³ mol

Step 4: Calculate the moles of N₂ formed from 5.27 × 10³ moles of C₃H₅N₃O₉

The molar ratio of C₃H₅N₃O₉ to N₂ is 2:3.

5.27 × 10³ mol C₃H₅N₃O₉ × 3 mol N₂/2 mol C₃H₅N₃O₉ = 7.91 × 10³ mol N₂ ≈ 8 × 10³ mol N₂

Answer:

The atom contains a vey small small nucleus that contains most of its mass.

Explanation:

The Rutherford gold leaf experiment concluded that most (99%) of all the mass of an atom is in the nucleus of the atom, that the nucleus is very small (105 times small than the size of the atom) and that is is positively charged.

In condensation, matter changes from a gas to a liquid. All matter is made of tiny moving particles called molecules. Evaporation and condensation happen when these molecules gain or lose energy. This energy exists in the form of heat.

Answer:

sample 3

Explanation:

i did this

Answer:

Sample 3

Explanation:

physical weathering means the breaking down of an object physically and the small cracks represent physical change.

Answer:

I think Water is carried to the leaves by xylem.

Answer:

d

Explanation:

Answer:

4 orbits in the fourth period.

19 electrons in the atom from group 1 and fourth period.

Explanation:

Potassium has 19 electrons distributed in its 4 orbits

The number of periods in a periodic table, tells the number of shells or orbitals of the atoms in that row in which the electrons are filled. Thus the fourth period elements have 4 orbitals and the first element in group one of the fourth period is potassium containing 19 electrons.

All elements in a periodic table are classified into different groups and periods. The vertical columns in the periodic table is called groups and the horizontal rows are called periods.

A group contains elements with same number of valence electrons and similar physical and chemical properties. In a period from left to right the atomic number increases but the number of orbitals in which the electrons are filled will be the same.

Down a group the number of orbitals increases by one. Thus, each elements contains electrons in an increment of 8, 18, 18 and 32 down a group. Thus, from third period to fourth period the number of orbital increases to 4.

The number of electrons will be +8 from the previous element in the group in third period. Thus, below sodium (11) the first element in fourth period is potassium with 19 electrons.

To find more on periodic table, refer here:

https://brainly.com/question/11155928

#SPJ2

Answer:

20 mg/m3

Explanation:

Given -  

S = 0.8 g/hr

Q = 40m3/hr

V =200 m3

As we know, the steady state CO concentration is given by  

Css = S/Q  

= 0.8/(40m3/hr)

= 800 mg/hr/(40m3/hr)

= 20mg/m3

Answer:

Hate to take up this answer spot, but there is no statements about phase changes.

Here are some phase changes to help: when matter changes phase.  Most common ex. is water(liquid) to ice(solid).  It is created by particles coming together, or spreading apart.

Brainliest?

Answer:

its less negative hope I helped buster

Because trans isomers are more stable than cis isomers, the cis isomer will have a less negative heat of formation than the trans isomer.

Cis- and trans isomers are compounds that have different configurations in space because of the presence of a rigid structure or functional groups in their molecule.

Cis atoms have functional groups on the same side.

Trans isomers have functional groups on alternate different.

The structure of cis-1-bromor-2-butene is attached.

Generally, trans isomers are more stable than cis isomers..

Stable compounds have more negative heat of formation while unstable compounds have less negative heat of formation.

Therefore, the cis isomer will have a less negative heat of formation than the trans isomer.

Learn more about cis and trans isomers at: https://brainly.com/question/4625349

Answer:

Relative organisms

Explanation:

Ecology is a branch of biology that deals with the relations of organisms to one another and to their physical surroundings and conditions.

hope this helps:)

Answer:

Explanation:

NaCl dissolves in water but not in benzene because the water-ion interactions are stronger than benzene-ion interactions.

This statement is true . NaCl is ionic compound . I water is ionises strongly because of strong ion - water interaction . It does not dissolve in benzene because of low ion - benzene interaction .

NaCl dissolves in water but not in hexane because the enthalpy of mixing NaCl with water is more negative than that of mixing NaCl with hexane.

This statement is wrong because enthalpy of mixing NaCl with water is positive and not negative .

NaCl dissolves in water but not in benzene(C6H6) because there are no hydrogen bonds in benzene.

This statement is wrong . NaCl does not make hydrogen bond with water molecule .

NaCl dissolves in water but not in benzene because the water-ion interactions are stronger than benzene-ion interactions.This statement is true .

The term ion is defined as an ion is an atom or molecule with a net electrical charge. There are two types of ions that are cation and anion.

This statement is true . NaCl is an ionic compound . The water is ionizes strongly because of strong ion - water interaction . It does not dissolve in benzene because of low ion - benzene interaction .

NaCl dissolves in water but not in hexane because the enthalpy of mixing NaCl with water is more negative than that of mixing NaCl with hexane. This statement is wrong because enthalpy of mixing NaCl with water is positive and not negative .

NaCl dissolves in water but not in benzene(C6H6) because there are no hydrogen bonds in benzene. This statement is wrong . Because NaCl does not make hydrogen bond with water molecule .

Thus, NaCl dissolves in water but not in benzene because the water-ion interactions are stronger than benzene-ion interactions.

To learn more about an ion, follow the link;

https://brainly.com/question/14982375

#SPJ2

Answer:

5.13 g of CO₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

C₁₂H₂₂O + 17O₂ —> 12CO₂ + 11H₂O

Next, we shall determine the mass of C₁₂H₂₂O that reacted and the mass of CO₂ produced from the balanced equation. This can be obtained as follow:

Molar mass of C₁₂H₂₂O = 182 g/mol.

Mass of C₁₂H₂₂O from the balanced equation = 1 × 182 = 182 g

Molar mass of CO₂ = 12 + (2×16)

= 12 + 32

= 44 g/mol

Mass of CO₂ from the balanced equation = 12 × 44 = 528 g

SUMMARY:

From the balanced equation above,

182 g of C₁₂H₂₂O reacted to produce 528 g of CO₂.

Finally, we shall determine the mass of CO₂ produced from the reaction. This can be obtained as follow:

From the balanced equation above,

182 g of C₁₂H₂₂O reacted to produce 528 g of CO₂.

Therefore, 1.77 g of C₁₂H₂₂O will react to produce = (1.77 × 528)/182 = 5.13 g of CO₂.

Thus, 5.13 g of CO₂ were obtained from the reaction.

Answer:

0.83M is molarity of the solution

Explanation:

In a 5% w/v solution of vinegar there are 5g of acetic acid per 100mL of solution. Or 50g per liter of solution. As molarity is defined as the moles of the solute (Acetic acid) per liter of solution we need to convert the 50g per liter to moles per liter using molar mass of acetic acid:

Molarity:

50g/L * (1mol / 60.052g) = 0.8326moles/L =

Answer:

[tex]APF(atomic packing factor)=0.31736[/tex]

Explanation:

From the question we are told that

Density of metal [tex]\rho=11.6 g/cm3[/tex]

Atomic weight of [tex]W=157.6 g/mol[/tex]

Atomic radius of [tex]r= 0.127 nm[/tex]

Lattice parameters=>[tex]x=0.523nm[/tex]  and [tex]y=0.330 nm[/tex]

Generally the equation for atomic packing factor is mathematically given as

[tex]APF(atomic packing factor)=\frac{Spere's\ volume}{unit\ cell\ volume}[/tex]

[tex]APF(atomic packing factor)=\frac{N*VN}{VC}[/tex]

Generally the equation for number of atoms N is mathematically given as

[tex]N=\frac{\rho }{atomic raduis*Avacados constant}[/tex]

[tex]N=\frac{11.6 }{0.127*10^{-9}*6.02214086*10^{23} mol-1}[/tex]

[tex]N=4[/tex]

Therefore APF(atomic packing factor)

[tex]APF(atomic packing factor)=\frac{N*VN}{VC}[/tex]

[tex]APF(atomic packing factor)=\frac{4*\frac{4}{3} \pi (0.127)^3}{(0.523)^2 *0.330}[/tex]

[tex]APF(atomic packing factor)=0.31736[/tex]

Answer:

6.499 g

Explanation:

One part of the aqueous HBr reacted with Zinc Hydroxide following the reaction:

And the remaining HBr reacted with NaOH:

First we calculate how many HBr moles remained after reacting with Zn(OH)₂. That number equals the number of NaOH moles used in the titration:

Now we calculate how many moles of HBr reacted with Zn(OH)₂:

Then we convert those 130.75 mmoles of HBr to the Zn(OH)₂ moles they reacted with:

Finally we convert Zn(OH)₂ moles to grams:

Answer:

Covalent-network (also called atomic) solids—Made up of atoms connected by covalent bonds; the intermolecular forces are covalent bonds as well. Characterized as being very hard with very high melting points and being poor conductors. Examples of this type of solid are diamond and graphite, and the fullerenes.

I hope it's helpful!

Answer:

network solid

Explanation:

Answer:

20.95 g of caffeine, C₈H₁₀N₄O₂

Explanation:

From the question given above, the following data were obtained:

Number of molecules of C₈H₁₀N₄O₂ = 6.5×10²² molecules

Mass of C₈H₁₀N₄O₂ =?

From Avogadro's hypothesis,

1 mole of C₈H₁₀N₄O₂ = 6.02×10²³ molecules

Next, we shall determine the mass of 1 mole of C₈H₁₀N₄O₂. This can be obtained as follow:

1 mole of C₈H₁₀N₄O₂ = (8×12) + (10×1) + (4×14) + (2×16)

= 96 + 10 + 56 + 32

1 mole of C₈H₁₀N₄O₂ = 194 g

Thus,

194 g of C₈H₁₀N₄O₂ = 6.02×10²³ molecules

Finally, we shall determine the mass of caffeine, C₈H₁₀N₄O₂ that contains 6.5×10²² molecules. This can be obtained as follow:

6.02×10²³ molecules = 194 g of C₈H₁₀N₄O₂

Therefore,

6.5×10²² molecules = (6.5×10²² × 194) / 6.02×10²³

6.5×10²² molecules = 20.95 g of C₈H₁₀N₄O₂.

Therefore, 20.95 g of caffeine, C₈H₁₀N₄O₂ contains 6.5×10²² molecules

Answer:

Add to a 500mL volumetric flask 300mL of water, the 129mL of the 11.6M HCl solution and then complete to volume with water

Explanation:

To make 500mL = 0.500L of a 3M HCl from the 11.6M HCl stock we need first to find the moles of HCl we need:

Moles HCl:

0.500L * (3mol / L) = 1.5 moles of HCl are needed

These moles are obtained from the 11.6M HCl solution. The volume required is:

1.5mol * (1L / 11.6moles HCl) = 0.129L = 129mL must be added to the solution.

That means to prepare the 500mL of the 3M HCl you need to:

Add to a 500mL volumetric flask 300mL of water, the 129mL of the 11.6M HCl solution and then complete to volume with water

Answer:

Calculation: 11.6 M × V = 3.0 M × 0.500 liters

V = 0.13 liters

Steps for dilution:

Measure out 0.13 liters of the concentrated solution of 11.6 M HCl using a volumetric pipet.

Transfer this into solution into a 500 milliliter volumetric flask.

Add water to the flask until it reaches a total volume of 500 milliliters.

Solution: V = 0.13 liters

Explanation:

Answer:

Gaseous nitrogen (78% in air) is fixed (by nitrogen fixing bacteria, and during lightning), then absorbed and assimilated by plants in the form of proteins, as well as nucleic acids. ... Nitrogen is returned to soil with excretory materials of animals and dead organisms.

Explanation:

Nitrates (or nitrites) are natural chemicals that are found in the soil, air and water. Nitrates are also used as a food additive to stop the growth of bacteria and to enhance the flavor and color of foodsAmmonium is also a general name for positively charged or protonated substituted amines and quaternary ammonium cations (NR + 4. ), where one or more hydrogen atoms are replaced by organic groups (indicated by R).an obsessive interest in or feeling about someone or something.

"our fixation with diet and fitness"

Denitrification: the loss or removal of nitrogen or nitrogen compounds specifically : reduction of nitrates or nitrites commonly by bacteria (as in soil) that usually results in the escape of nitrogen into the air

Answer: The components are Strontium (Sr) and Phosphorous (P). The symbol for the element that forms the positive cation is [tex]Sr^{2+}[/tex]. The symbol for the element that forms the negative anion is [tex]P^{3-}[/tex]. The subscript on the cation in the neutral formula is 3 and the subscript on the anion in the neutral formula is 2.

Explanation:

For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.

Here in strontium phosphide , element strontium is having an oxidation state of +2 called as [tex]Sr^{2+}[/tex] cation and element phosphorous [tex]P^{3-}[/tex] is an anion with oxidation state of -3. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral strontium phosphide [tex]Sr_3P_2[/tex]