What is the pH of 0.15 M solution of trimethylammonium nitrate, (CH3)3NHNO3, a salt?
a. 8.66
b. 9.20
c. 8.88
d. 5.12
e. 5.34

4 Bonding Pairs: The molecular shape observed for four bonding pairs is a tetrahedral shape. 3 Bonding Pairs: The molecular shape observed for three bonding pairs is a trigonal planar shape.

Molecular shape is the three-dimensional arrangement of the atoms that make up a molecule. It is determined by the number of electrons in the outermost energy level of the molecule's atoms, which is known as the valence shell. The shape of a molecule is determined by the electron-pair repulsion theory.

2 Bonding Pairs and 2 Lone Pairs: The molecular shape observed for two bonding pairs and two lone pairs is a bent shape. This means that the molecule is shaped like a "V" with two corners. Each of the two corners is the result of a single covalent bond connecting two atoms. The two lone pairs are located on the two "arms" of the "V" shape.

3 Bonding Pairs and 1 Lone Pair: The molecular shape observed for three bonding pairs and one lone pair is a trigonal pyramidal shape. This means that the molecule is shaped like a pyramid, with three corners. Each of the three corners is the result of a single covalent bond connecting two atoms. The lone pair is located at the fourth corner of the pyramid.

Learn more about Molecular shape :

brainly.com/question/22697472

#SPJ4

The resulting H is +365.1 kJ/mol for the reaction of NH₄NO₃(s) → NH⁴⁺(aq) + NO₃(aq), using Hess's law equation.

Because it takes energy to dissolve NH₄NO₃(s) into NH⁴⁺(aq) and NO₃(aq) and break the bonds that bind the ions together in the solid, the process of solution is endothermic. We may figure out H for this procedure using the Hess's Law equation given below:

ΔH(solution) = H (NH⁴⁺(aq)), H (NO₃(aq), and H (NH₄NO₃(s)).

For each species participating in the process, we may look up the typical enthalpies of formation and substitute those values into the equation:

ΔH(solution) = [NH⁴⁺(aq): 0 kJ/mol + NO₃(aq): 0 kJ/mol]. NH₄NO₃(s): -365.1 kJ/mol

ΔH(solution) = 0 kJ/mol, 0 kJ/mol, and 365.1 kJ/mol.

ΔH(solution) = +365.1 kJ/mol

To know more about Hess's law, refer:

https://brainly.com/question/27782117

#SPJ4

To find the concentration of A³⁻ ions at equilibrium for a 0.10 M solution of the hypothetical triprotic acid H₃A, approximately 9.1 × 10⁻²¹ M.

We need to consider the dissociation constants Ka1, Ka2, and Ka3. the concentration of A³⁻ ions at equilibrium for a 0.10 M solution of the hypothetical triprotic acid H₃A is 9.1 × 10⁻²¹ M (option a).

For the first dissociation: H₃A ⇌ H⁺ + H₂A⁻, Ka1 = 6.0 × 10⁻³ Since Ka1 is relatively large, we can assume that the first dissociation goes nearly to completion.

Thus, the concentration of H₂A⁻ will be approximately 0.10 M. For the second dissociation: H₂A⁻ ⇌ H⁺ + HA²⁻, Ka2 = 2.0 × 10⁻⁸

We can set up an expression for Ka2: (x)(0.10 - x) / (0.10), assuming x is the concentration of HA²⁻ ions.

Solving for x, we get approximately 1.4 × 10⁻⁵ M. For the third dissociation: HA²⁻ ⇌ H⁺ + A³⁻, Ka3 = 1.0 × 10⁻¹⁴

Now, we can set up an expression for[tex]Ka_{3}[/tex] : [tex]\frac{1.4 * 10^{-5} }{1.4 * 10^{-5} }[/tex]

assuming y is the concentration of A³⁻ ions. Solving for y, we get approximately 9.1 × 10⁻²¹ M.

To know more about equilibrium

https://brainly.com/question/517289

#SPJ11

Answer:

b. The number of protons always changes when transmutation occurs.

Explanation:

Transmutation is the process of changing one element into another by altering the number of protons in the nucleus of an atom. This can be achieved through natural radioactive decay or artificial means, such as nuclear reactions in a laboratory. When the number of protons changes, the identity of the element changes as well. The number of electrons, neutrons, and energy levels may or may not change during transmutation, depending on the specific reaction.

In top right box in a punnet square of gibbs free energy, Delta H values are placed.

In a punnet square of Gibbs free energy, Delta S values are on top. Delta H is are on the side. The power related to a chemical response that may be used to do work. The unfastened power of a device is the sum of its enthalpy (H) plus the made of the temperature (Kelvin) and the entropy (S) of the device. The extrade in Gibbs free energy(ΔG) is the most quantity of unfastened power to be had to do beneficial work. To construct the punnet square for Gibbs free energy, Delta S values are on top. Delta H is are on the side.

To learn more about Gibbs free energy check the link below-

brainly.com/question/9179942

#SPJ4

The pair of compounds in which the second molecule is produced by the deamination of the first molecule is amino acid and keto acid.

An  amino acids are organic compounds that contain both an amine group and a carboxylic acid group. When the amine group is removed through deamination, it forms a keto acid, which is a type of organic acid that contains a carbonyl group.
The process of deamination can result in the formation of a keto acid from an amino acid, making amino acid and keto acid a pair of compounds in which the second molecule is produced by the deamination of the first molecule.
The pair of compounds in which the second molecule is produced by the deamination of the first molecule is glutamate and α-ketoglutarate.
Deamination is the process of removing an amino group (-[tex]NH_{2}[/tex]) from an amino acid or other organic compound. In this case, when glutamate undergoes deamination, the amino group is removed, and α-ketoglutarate is formed as a result. The reaction can be represented as follows:
Glutamate >>> α-ketoglutarate +[tex]NH_{3}[/tex]
In summary, the pair of compounds where the second molecule is produced by deamination of the first molecule is glutamate and α-ketoglutarate.

For more information on deamination kindly visit to

https://brainly.com/question/28287500

#SPJ11

The pH of an aqueous solution of 0.184M carbonic acid, H2CO3, is approximately 2.98. The correct answer is (c) 2.97.

To find the pH of an aqueous solution of 0.184M carbonic acid, H2CO3, we need to consider the dissociation of H2CO3 into its respective ions.

H2CO3 ⇌ H+ + HCO3- (Ka1 = 4.2 x 10-7)
HCO3- ⇌ H+ + CO32- (Ka2 = 4.8 x 10-11)

Ka1 and Ka2 represent the acid dissociation constants for the two protonation steps of carbonic acid. We can use these values to calculate the equilibrium concentrations of H+, HCO3-, and CO32- ions in solution.

First, we need to calculate the equilibrium concentration of HCO3- ions. Since carbonic acid is a weak acid, we can assume that most of it remains undissociated in solution. Therefore, the initial concentration of H2CO3 is equal to the concentration of HCO3- ions at equilibrium.

[HCO3-] = [H2CO3] = 0.184 M

Using the equilibrium constant expression for the first dissociation step, we can solve for the concentration of H+ ions.

Ka1 = [H+][HCO3-] / [H2CO3]
4.2 x 10-7 = [H+] x 0.184 / 0.184
[H+] = 4.2 x 10-7 M

Now that we know the concentration of H+ ions, we can use the equilibrium constant expression for the second dissociation step to calculate the concentration of CO32- ions.

Ka2 = [H+][CO32-] / [HCO3-]
4.8 x 10-11 = [4.2 x 10-7] x [CO32-] / 0.184
[CO32-] = 5.5 x 10-10 M

Finally, we can use the equation for the conservation of charge to calculate the concentration of OH- ions in solution.

[H+] x [OH-] = Kw = 1.0 x 10-14
[OH-] = Kw / [H+]
[OH-] = 1.0 x 10-14 / 4.2 x 10-7
[OH-] = 2.4 x 10-8 M

Now that we know the concentration of OH- ions, we can calculate the pH of the solution using the equation:

pH = -log[H+]
pH = -log(4.2 x 10-7)
pH = 6.38

However, we need to take into account that the solution contains a weak acid and its conjugate base, so we need to calculate the pH using the Henderson-Hasselbalch equation.

pH = pKa + log([A-]/[HA])
pH = 6.37 + log(5.5 x 10-10 / 0.184)
pH = 2.98

Therefore, the pH of an aqueous solution of 0.184M carbonic acid, H2CO3, is approximately 2.98. The correct answer is (c) 2.97.

To know more about carbonic acid click here:

https://brainly.com/question/13929437

#SPJ11

The given statement is false. The problem can be solved using the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in kelvin. Rearranging this equation gives T = PV/nR.

In the given problem according to ideal gas law, we have P = 2.80 atm, V = 1.05 L, and n = 4.00 g / (39.95 g/mol) = 0.100 mol (using the molar mass of argon). The gas constant R is 0.08206 L·atm/(mol·K). Substituting these values into the equation for T gives:

T = (2.80 atm)(1.05 L)/(0.100 mol)(0.08206 L·atm/(mol·K)) = 334 K

Converting this temperature to degrees Celsius gives:

T = 334 K - 273.15 = 60.9 ℃

Therefore, the statement is false. The temperature of the gas is actually 60.9 ℃, not 84.9 ℃.

To learn more about Ideal gas law click here

https://brainly.com/question/30458409

#SPJ11

x = 36. Moving away from the radioactive source reduces the student's exposure by a factor of x. Since the student initially was 1 m away and now is 6 m away.

Source refers to the origin or starting point of something. It is typically used to describe the origin of information, such as a book, article, or other media. Sources are also used to describe the origin of a material, such as a raw material or ingredient. Sources can also refer to the origin of energy, such as a power source, or the origin of a financial resource. In computing, source code is the set of instructions used to create a program. The source code is written in a programming language, which is then compiled into a format that can be read and executed by a computer.

To learn more about source

https://brainly.com/question/30174368

#SPJ4

State of Hybridization of N in NO³: In this case, the three sp² orbitals are arranged in a trigonal plane.

The overlap of an oxygen 2p orbital and a nitrogen sp² hybrid orbital results in the formation of each of these N-O bonds. In this way, the particle, NO³⁻is planar, and all the ONO points become 120°.

Sub-atomic orbital (MO) hypothesis depicts the way of behaving of electrons in a particle with regards to blends of the nuclear wavefunctions. All of the molecule's atoms may be covered by the resulting molecular orbitals.

Learn more about molecular orbital theory:

brainly.com/question/30398813

#SPJ4

The hydroxides that are strong bases are; KOH, NaOH, Ba(OH)₂. Option A is correct.

Hydroxides are compounds that contain the hydroxide ion (OH⁻) as a negatively charged functional group. The hydroxide ion consists of one oxygen atom and one hydrogen atom, and it has a net charge of -1. Hydroxide ions can act as bases, as they are able to accept protons (H⁺ ions) from other molecules.

The strength of a base depends on its ability to accept protons (H⁺ ions) from water molecules. Strong bases are those that completely dissociate in water, producing high concentrations of hydroxide ions (OH⁻) and are typically group 1 or group 2 metal hydroxides.

Therefore, the hydroxides that are strong bases is; KOH, NaOH, and Ba(OH)₂.

Hence, A. is the correct option.

To know more about strong bases here

https://brainly.com/question/16749233

#SPJ1

To answer this question, we first need to understand the chemical formula for diphosphorous pentoxide. The formula is P2O5, which means that each molecule of diphosphorous pentoxide contains two atoms of phosphorous and five atoms of oxygen. Next, we need to use the molar mass of diphosphorous pentoxide to determine how many moles of the compound are in a 15.5 gram sample. The molar mass of P2O5 is 141.94 g/mol (30.97 g/mol for each phosphorous atom and 16.00 g/mol for each oxygen atom), so we can use the following equation to calculate the number of moles:
moles = mass / molar mass
moles = 15.5 g / 141.94 g/mol
moles = 0.1092 mol

Now that we know the number of moles of diphosphorous pentoxide in the sample, we can use the mole ratio from the formula to determine the number of moles of phosphorous:
1 mol P2O5 contains 2 moles of P
0.1092 mol P2O5 contains 0.2184 mol of P

Finally, we can use the molar mass of phosphorous (30.97 g/mol) to convert the number of moles to grams:
grams of P = moles of P x molar mass of P
grams of P = 0.2184 mol x 30.97 g/mol
grams of P = 6.76 g
Therefore, a 15.5 gram sample of diphosphorous pentoxide contains 6.76 grams of phosphorous.

To know more about diphosphorous pentoxide visit:-

https://brainly.com/question/29825845

#SPJ11

The strength of a bond between similar types of atoms, such as two hydrogen atoms or two chlorine atoms, is determined by the distance between the nuclei of the two atoms, also known as the bond length. As the bond length increases, the strength of the bond decreases.

Another possible explanation is the effect of electronegativity. Electronegativity is the ability of an atom to attract electrons towards itself in a chemical bond. When two atoms with similar electronegativities form a bond, the electrons are shared equally between them, resulting in a nonpolar covalent bond. However, if the electronegativity of one atom is higher than the other, the electrons are not shared equally, resulting in a polar covalent bond. The strength of a polar covalent bond is influenced by the size of the dipole moment, which increases as the bond length decreases. Therefore, as the bond length increases, the strength of a polar covalent bond decreases.

In summary, the strength of a bond between similar types of atoms is influenced by the distance between the nuclei, which is determined by the size of the atoms and the electronegativity of the atoms. As the bond length increases, the strength of the bond decreases, due to the decreased attraction between the valence electrons of the two atoms and the decreased dipole moment in polar covalent bonds.

To know more about hydrogen atoms visit:-

https://brainly.com/question/30886690

#SPJ11

The gas sample will expand to approximately 5.54 liters when heated from 50.0°C to 500.0°C.

To determine the final volume of a gas sample when it is heated from 50.0°C and 2.33 L to 500.0°C, we can use Charles's Law, which states that the volume of a gas is directly proportional to its temperature, provided that the pressure and the amount of gas remain constant.

The formula for Charles's Law is:

V1/T1 = V2/T2

where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature. First, convert the temperatures from Celsius to Kelvin by adding 273.15 to each:

T1 = 50.0°C + 273.15 = 323.15 K
T2 = 500.0°C + 273.15 = 773.15 K

Now, plug the values into the formula and solve for V2:

(2.33 L) / (323.15 K) = V2 / (773.15 K)

V2 = (2.33 L) * (773.15 K) / (323.15 K)
V2 ≈ 5.54 L

So, the gas sample will expand to approximately 5.54 liters when heated from 50.0°C to 500.0°C.

To learn more about temperature, refer below:

https://brainly.com/question/11464844

#SPJ11

If we assume the solution is ideal, we can use the formula for the freezing point depression to find the freezing point:
ΔTf = Kf · molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant (1.86 °C/m for water), and molality is the concentration in moles per kilogram of solvent.

First, we need to find the number of moles of magnesium chloride in the solution:

n(MgCl2) = 0.856 g / (24.305 g/mol + 2 × 35.453 g/mol) = 0.00887 mol

Next, we need to find the mass of water in the solution:

m(H2O) = 87.7 g

From this, we can calculate the molality:

molality = n(MgCl2) / m(H2O) = 0.00887 mol / 0.0877 kg = 0.101 mol/kg

Finally, we can use the formula to find the freezing point depression:

ΔTf = 1.86 °C/m · 0.101 mol/kg = 0.188 °C

Since the freezing point of pure water is 0 °C, the freezing point of the solution is:

0 °C - 0.188 °C = -0.188 °C

So the freezing point of the solution is -0.188 °C.
To find the freezing point of the magnesium chloride solution, we will use the freezing point depression formula:

ΔTf = Kf × molality × i

where ΔTf is the freezing point depression, Kf is the cryoscopic constant for water (1.86 °C/m), molality is the moles of solute per kilogram of solvent, and i is the van't Hoff factor (number of ions the solute dissociates into in the solution).

1. First, determine the moles of magnesium chloride (MgCl2):
MgCl2 = 0.856 g / (24.305 g/mol (Mg) + 2 × 35.453 g/mol (Cl)) = 0.00854 mol

2. Next, find the molality:
molality = 0.00854 mol / 0.0877 kg (87.7 g of water = 0.0877 kg) = 0.0974 mol/kg

3. Determine the van't Hoff factor (i) for MgCl2:
MgCl2 dissociates into Mg²⁺ and 2Cl⁻, so i = 1 + 2 = 3

4. Calculate the freezing point depression (ΔTf):
ΔTf = 1.86 °C/m × 0.0974 mol/kg × 3 = 0.542 °C

5. Finally, find the new freezing point:
The ideal freezing point of pure water at 1 atm is 0 °C. Since the solution is freezing point depression, the new freezing point is:
0 °C - 0.542 °C = -0.542 °C

The freezing point of the magnesium chloride solution is -0.542 °C to 3 decimal places.

For more information on ideal solution visit:

brainly.com/question/30188231

#SPJ11

d. absorb UV light. In order to visualize compounds on a TLC plate under UV light, the compounds must be able to absorb UV light, which causes them to fluoresce and appear as a bright spot on the plate.

UV (ultraviolet) light is a type of electromagnetic radiation that is shorter in wavelength than visible light but longer than X-rays. It has a wavelength range of 10 nanometers to 400 nanometers and is divided into three categories: UVA, UVB, and UVC. UVA has a longer wavelength and can penetrate deeper into the skin, causing skin aging and damage. UVB has a shorter wavelength and is responsible for sunburns and the development of skin cancer. UVC has the shortest wavelength and is absorbed by the Earth's atmosphere before it can reach the surface. UV light is present in sunlight, but it can also be produced artificially for various purposes, such as sterilization, water purification, and tanning. However, excessive exposure to UV light can have harmful effects on living organisms, including DNA damage, skin cancer, and eye damage. Therefore, it is important to take precautions and protect yourself from overexposure to UV light.

Learn more about UV light here:

https://brainly.com/question/30767013

#SPJ11

The answer  is yes, the Henderson-Hasselbalch equation can still be used if a weak acid-base solution is 100% in its conjugate acid form.

The Henderson-Hasselbalch equation is used to calculate the pH of a buffer solution, which is a solution containing a weak acid and its conjugate base or a weak base and its conjugate acid. The equation relates the pH of the buffer solution to the pKa of the weak acid and the ratio of the concentrations of the weak acid and its conjugate base.

Even if a weak acid-base solution is 100% in its conjugate acid form, the Henderson-Hasselbalch equation can still be used. This is because the equation only requires the ratio of the concentrations of the weak acid and its conjugate base, not the actual concentrations.

In other words, even if the concentration of the conjugate base is zero because the solution is 100% in its conjugate acid form, the Henderson-Hasselbalch equation can still be used because the ratio of the concentrations is still meaningful.

In summary, the Henderson-Hasselbalch equation can be used even if a weak acid-base solution is 100% in its conjugate acid form because the equation only requires the ratio of the concentrations of the weak acid and its conjugate base, which is still meaningful even if one of the concentrations is zero.

To know more about conjugate acid visit:

brainly.com/question/31229565

#SPJ11

To calculate the Entropy change (ΔS) for a certain process at 127°C, we can use the Gibbs free energy equation: ΔG = ΔH - TΔS. First, convert the temperature to Kelvin: T = 127°C + 273.15 = 400.15 K.

Given ΔG = -16.20 kJ and ΔH = -17.0 kJ, we can plug these values into the equation:

-16.20 kJ = -17.0 kJ - (400.15 K)(ΔS)

Now, solve for ΔS:

ΔS = (ΔH - ΔG) / T = (-17.0 kJ + 16.20 kJ) / 400.15 K = -0.002 kJ/K

Since 1 kJ = 1000 J, we can convert ΔS to J/K:

ΔS = -0.002 kJ/K * 1000 J/1 kJ = -2.0 J/K

Therefore, the entropy change for this process at this temperature is ΔS = -2.0 J/K.

learn more about Entropy change here:

https://brainly.com/question/30691597

#SPJ11

Exothermic and endothermic are terms used to describe two types of processes that involve energy transfer. In an exothermic process, energy is released from the system into the surroundings, resulting in a decrease in the internal energy of the system and an increase in the energy of the surroundings. This release of energy is often in the form of heat, but it can also be in the form of light or other forms of radiation. Examples of exothermic processes include combustion reactions, such as burning of fuel, and condensation of gases.

a) Water freezing into ice is an exothermic change because it releases heat to the surroundings. The water molecules lose kinetic energy and form a more ordered structure as ice crystals, which leads to a decrease in the internal energy of the system and an increase in the energy of the surroundings.

b) Natural gas burning is an exothermic change because it releases heat to the surroundings. The chemical reaction between natural gas (mainly methane) and oxygen produces carbon dioxide and water vapor, along with a release of energy in the form of heat and light. This heat can be used for various purposes, such as heating homes or generating electricity.

To know more about endothermic ,

https://brainly.com/question/23184814

#SPJ11

1. The faint pink color indicates that the reaction has reached the endpoint of the titration, meaning that all of the reactant has been consumed and the solution is slightly basic. 2. If the original solution had remained neutral, the product(s) could have been a salt and water.

3. If the original solution had been alkaline, the product(s) could have been a hydroxide and water.
4. An indicator is not needed in redox titrations because the endpoint is determined by a change in color due to the oxidation or reduction of the analyte, rather than the addition of an indicator.
5. To create a usable voltage from this reaction, the reaction would need to occur in a closed system with two electrodes, one of which is a reducing agent and the other is an oxidizing agent. The electrons generated by the redox reaction can then flow through an external circuit, creating a current and a usable voltage.


1. The faint pink color in the reaction indicates the endpoint of the titration, usually associated with the presence of a small amount of unreacted permanganate ions (MnO4-) in an acidified solution. This color change signifies the completion of the redox reaction.

2. If the original solution had remained neutral (not acidified with H2SO4), the products would likely be different from the ones formed in an acidic environment. However, to provide a more accurate answer, the reactants and specific reaction involved would be needed.

3. If the original solution had been alkaline, the products would also differ from those in an acidic environment. Again, to give a precise answer, it's essential to know the reactants and specific reaction taking place.

4. An indicator is not needed in redox titrations because the titrating agent (like potassium permanganate) acts as its own indicator. The color change, such as the appearance of a faint pink color, indicates the endpoint of the titration without needing a separate indicator.

5. To create a usable voltage from this redox reaction, you would need to construct an electrochemical cell (also known as a galvanic cell) by separating the oxidation and reduction half-reactions. This can be done by connecting two half-cells with a salt bridge and an external circuit. The flow of electrons through the external circuit generates a usable voltage.

To know more about Titration visit:

https://brainly.com/question/31271061

#SPJ11

The more stable structure is the one in which the negative charge resides on the more electronegative oxygen atom.

The thiosulfate ion ( S₂O₃²⁻) prefers resonance structures with two single bonds between the other sulfur atom and the remaining two oxygen atoms and a double bond between one of the sulfur atoms and one of the oxygen atoms.

This structure is favored because it minimizes formal charges and enables the most stable electron dispersion. Each atom in this structure has a formal charge of zero.

Learn more about resonance structure:https://brainly.com/question/29547999

#SPJ1

5.00mole of ZnCl[tex]_2[/tex] are produced and  10 moles of HCl are reacted. A mole, usually spelt mol, is a common scientific measurement.

In chemistry, a mole, usually spelt mol, is a common scientific measurement unit for significant amounts of very small objects like atoms, molecules, and other predetermined particles. The mole designates 6.02214076 1023 units, which is a very large number. For the Worldwide System of Units (SI).

The mole is defined as this number as of May 20, 2019, according to the General Conference of Weights and Measures. The total amount of atoms discovered through experimentation to be present in 12 grammes of carbon-12 was originally used to define the mole.

Zn(s) + 2HCl(aq) -----> ZnCl[tex]_2[/tex](aq) + H[tex]_2[/tex](g)

moles of ZnCl[tex]_2[/tex] = 5.00mole

moles of HCl  = 2× 5.00mole = 10 moles

To know more about mole, here:

https://brainly.com/question/20486415

#SPJ1

The empirical formula of a substance that is 53. 5% c, 15. 5% h, and 31. 1% n by weight is C₂H₇N.

To determine the empirical formula, we need to convert the percentages to moles. Assume 100 g of the substance, then we have:

53.5 g C / 12.011 g/mol = 4.46 mol C

15.5 g H / 1.008 g/mol = 15.38 mol H

31.1 g N / 14.007 g/mol = 2.22 mol N

We then divide each by the smallest number of moles to get the mole ratio:

C: 4.46 mol / 2.22 mol = 2

H: 15.38 mol / 2.22 mol = 6.92 (rounded to 7)

N: 2.22 mol / 2.22 mol = 1

So the empirical formula is C₂H₇N.

To know more about the empirical formula refer here :

https://brainly.com/question/14044066#

#SPJ11

The balanced half-reactions convert from moles of electrons to moles of reactant/product need oxidation and reduction processes.

Using balanced half-reactions can help convert the moles of electrons to moles of reactants or products in a chemical reaction. The process involves several steps.

Firstly, the balanced equation for the reaction needs to be written. Secondly, half-reactions for both the oxidation and reduction processes must be written. The half-reactions are then balanced by adding electrons to one side of the equation to balance the charges.

After balancing, the number of moles of electrons transferred in the balanced half-reactions is determined.

Finally, the mole ratio between electrons and the reactant/product in the balanced equation is used to convert the moles of electrons to moles of the reactant or product.

To learn about half-reaction:

https://brainly.com/question/30330717

#SPJ4

When hydrochloric acid reacts with aluminum, the two products formed are aluminum chloride and hydrogen gas. The chemical equation for this reaction is:

2HCl + 2Al → 2AlCl3 + H2

The hydrochloric acid (HCl) donates a hydrogen ion (H+) to the aluminum (Al) which then forms aluminum chloride (AlCl3). At the same time, the aluminum loses electrons to become positively charged and these electrons are used to reduce hydrogen ions to form hydrogen gas (H2). The reaction is exothermic and produces a lot of heat and gas, making it useful in various industrial applications.

In the reaction of hydrochloric acid with aluminum, the two products would be aluminum chloride and hydrogen gas. This reaction can be represented by the balanced chemical equation: 6HCl + 2Al → 2AlCl3 + 3H2. Here, hydrochloric acid (HCl) reacts with aluminum (Al) to form aluminum chloride (AlCl3) and hydrogen gas (H2) as the byproduct.

To know more about Hydrochloric acid visit:

https://brainly.com/question/15231576

#SPJ11

A solution in which more solute is dissolved than is typically soluble at a given temperature is referred to as a supersaturated solution. This type of solution is created by dissolving the maximum amount of solute possible in a solvent at a higher temperature and then allowing the solution to cool down slowly.

This process can create a solution that contains more solute than it can normally hold at a given temperature. Supersaturated solutions are often used in various industrial processes, such as the production of certain types of crystals or pharmaceuticals. They can also be found in nature, such as in the formation of certain types of minerals.

A solution in which more solute is dissolved than is typically soluble at a given temperature is called a supersaturated solution. In this type of solution, the solute concentration exceeds its saturation point, meaning the solution holds more solute than it would under equilibrium conditions. Supersaturation occurs when a solution is cooled or heated without any solute precipitating out, or when the pressure is changed. To create a supersaturated solution, you can first dissolve a solute in a solvent at a higher temperature, and then slowly cool the solution down, allowing the solute to remain dissolved beyond its normal solubility.

To know more about solute visit:

https://brainly.com/question/30665317

#SPJ11

k[a] best  describes the unimolecular elementary reaction

What exactly is a simple reaction?

An elementary reaction just requires one step, making it the simplest sort of reaction. An elementary reaction is often categorized according to its molecularity, which is a measurement of how many molecules of reactants are involved.

A unimolecular reaction occurs when a molecule rearranges itself to produce one or more products. An illustration of this is the emission of particles from an atom during radioactive decay. Racemization, heat breakdown, cis-trans isomerization, and ring opening are more examples.

Two reactant molecules collide during a bimolecular reaction. A trimolecular reaction is a straightforward interaction between three molecules.

To learn more about isomerization use:

https://brainly.com/question/9116728

#SPJ4

We can  keep the spiral ham in the refrigerator for three to five days.

The Spiral-cut hams and the leftovers from the consumer-cooked hams can be stored in the refrigerator for the three to the five days or the frozen for the one to the two months. We will keep the refrigerator at the temperature of  40 °F or the less and the freezer at or the near 0 °F.

If we have the whole ham, the ham will last in the fridge for the approx  seventy - five days. If we have the half ham, the ham will last for the about the sixty days.

To learn more about spiral ham here

https://brainly.com/question/30512808

#SPJ4

To calculate the change in internal energy of the engine, we need to use the First Law of Thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.

In this case, the engine provides 551J of work to push the pistons, and generates 2250J of heat that must be carried away by the cooling system. Therefore, the change in internal energy can be calculated as:

ΔU = Q - W
ΔU = 2250J - 551J
ΔU = 1699J

Therefore, the correct answer is (c) 1699J. This means that the internal energy of the engine has increased by 1699J due to the heat generated by the engine, minus the work done by the engine. This information can be useful in designing and optimizing cooling systems for automobiles, to ensure that the excess heat generated by the engine is effectively dissipated and does not negatively impact the engine's performance or longevity.

TO KNOW MORE ABOUT  internal energy CLICK THIS LINK -

brainly.com/question/14668303

#SPJ11