What is the probability that a random sample of N 45 oil changes results in a sample mean time less than 10 minutes?.

Answer : Yes it is possible to increase the power with out changing the amount of work.

What is power ?

-- The power is defined by the amount of power divided by the time.

-- This time is the one needed to do the work.

-- We can understand this issue by analyzing an example with numeric values.

Work = 500 [J]

Time = 5 [s]

Power will be:

Now if we change the time to 2 seconds:

As we can see, the power was increased without the need to change the work.

What is Joule ?

- A unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre.

-- Named in honour of the English physicist James Prescott Boule, it equals 107 ergs, or approximately 0.7377 foot-pounds

Learn more about work from https://brainly.com/question/14131741.

#spj4

Torque is calculated using the formula, τ = r × F, where, r is the perpendicular distance, F is the force.

It is also described as the cross product of distance vector and force vector. Mathematically, τ = r × F = r F sinθ, where, θ is the angle between r and F.

For example, a force is applied to a particle free to rotate about a fixed axis. Force is divided into perpendicular and parallel components. Torque is pointed outward from the page and has the magnitude

τ = r F sinθ

Newton-meters, sometimes known as N.m, are the SI units for torque. Although these units are the same as joules, torque isn't considered to be work or energy, therefore N.m should be used instead.

To know more about torque:

brainly.com/question/30187149

#SPJ4

The magnitude and direction of the resultant force is 25 N upwards.

The magnitude of the resultant force is the sum of all the forces acting at a point.

To obtain the magnitude of the resultant force, we will sum all the forces acting on the object and considering the signs of the forces as well.

The sum of all the forces acting on the object is calculated as follows;

F ( net ) = F₁ + F₂

where;

F (net) = 85 N - 60 N

F (net) = 25 N upwards

Learn more about resultant force here: https://brainly.com/question/25239010

#SPJ1

The complete question is below:

85 N force going vertically upwards and 60N going vertically down

Calculate the magnitude and direction of the resultant force.

The ratio of rotational energy to the translational kinetic energy is 1:435.

The rotational energy of the ball is calculated as follows;

E = ¹/₂Iω²

where;

I = ²/₅MR²

I = ²/₅ x (0.0466)²(M)

I = 8.69 x 10⁻⁴ M

E =  ¹/₂Iω²

E =  ¹/₂(8.69 x 10⁻⁴ M)(62.9)²

E = 1.72 M

The translational kinetic energy of the ball is calculated as follows;

E = ¹/₂Mv²

E = ¹/₂ (38.7)²M

E = 748.85 M

Ratio of rotational energy to the translational kinetic energy is calculated as;

R = ( 1.72 M ) / ( 748.85 )

R = 1 : 435

Learn more about  translational kinetic energy here: https://brainly.com/question/9078768

#SPJ1

Answer:

im not to sure about it

maybe check online

It takes a train going 50 mph approximately 1 ½ miles (26 football fields) to stop safely.

The total stopping distance is the distance traveled by the vehicle from the moment the driver detects danger and steps on the brake until the vehicle comes to a stop.

The easiest way to calculate total stopping distance is to use the 3 second rule. When safe and legal, a U-turn allows a driver to turn a vehicle in a lane, side street, alley, or driveway. A 3-point turn is a safer way to change direction than a 2-point turn.

Stopping distance is the distance from when your body decides to stop a moving vehicle to when it comes to a complete stop.

For more information on stopping distance, visit :

https://brainly.com/question/28532160

#SPJ4

When the cannonball finally touches the ground, it will have been 1.94 seconds.

We may disregard the answer t = -0.249 seconds since what we're interested in is what happens after the cannon is fired (i.e., when time t > 0). As a result, the cannonball reaches height h = 0 m and hits the earth at time t = 6.474 seconds.

Initial speed (u) equals 251 m/s.

Cliff height (h) equals 91 meters.

(s) is the horizontal distance.

Cliff height (h) equals 91 meters.

Gravitational acceleration (g) equals 9.8 m/s2.

Time (t) =?

h = ½gt²

91 = ½ × 9.8 × t²

91 = 4.9 × t²

Divide both side by 4.9

t² = 91/4.9

Do both sides' square roots.

t = √(91/4.9)

t = 1.94 s

Initial velocity (u) =  251 m/s

Time (t) = 1.94 s

Horizontal distance (s) =?

s = ut

s = 251 × 1.94 s

s = 486.94m.

To know more about Initial velocity visit:-

https://brainly.com/question/9163788

#SPJ1

Velocity of an object depends on its displacement and its direction. Displacement is the minimum distance between the starting and the end point. Velocity is the  rate of change in displacement.

Velocity can be calculated by displacement/ change in time. Relative velocity will be either equal or less than the relative speed, because speed is either greater than or equal to displacement. Also it is a vector quantity, so it also depends on the direction of the movement.

The magnitude depends on the magnitude of the displacement. The direction will be the direction of the resultant vector quantity. It is usually as the same as the direction of movement.

So velocity depends on the magnitude and direction of displacement.

For further information regarding Velocity, kindly refer

https://brainly.com/question/18084516

#SPJ4

Yes, mass matters in zero gravity. Mass is the "amount of matter" that is constant regardless of the gravitational field in which the object exists.(even at 0g)

Mass is always the same, but weight can change depending on the amount of gravity acting on the object. Any two masses have a mutual attraction, and the greater the mass, the greater the attraction. Gravity holds everything together. If gravity suddenly becomes zero, all objects in the planet's gravitational field are lost in space. You will feel weightless. Whether measured on Earth or on the ISS, the mass does not change. Weight may change due to gravitational forces such as B. On the moon, the weight is reduced to one-sixth of what it is on Earth.

Learn more about the gravity in

https://brainly.com/question/14874038

#SPJ4

Lower latency is the less delay during the journey of an object that's why it is always beneficial for a user.

If one have to cover a distance of 300 km, then he/she will chose a car of maximum speed 100 kmph, over the car of speed 50 kmph. Because car with more speed will make him/her able to reach the destination in 3 hours whereas the car with slower speed will take 6 hours. But if consider the factor of latency, that is the less delay in the path, than slower car can beats the faster car if it experiences the less delay or latency. There are various reason of delay, like traffic, congestion of the way bad condition of road, operational time of car, etc. If faster car go with a ling, and congested route with traffic whereas slower car go with the smooth route, then slower car can and does beat the faster car. That's why latency is more important than speed.

To know more about delay, here

https://brainly.com/question/13144339

#SPJ4

The image A shows the direction of the transfer of heat from the ice to the walls of the freezer.

As we approach the question that we here, the first law of thermodynamics would come to our minds, we know that energy can not be created nor destroyed but we can be able  to convert the energy from one form to the other.

In this case, we know that the temperature of the walls of the refrigerator is about  −10°C while the ice is at a temperature of about  0°C. This means that the ice would have a temperature that is higher and then the walls of the fridge.

Learn more about heat transfer:https://brainly.com/question/13433948

#S[J1

A balloon expands as you blow into it because of the increase in pressure inside the balloon caused by the air you are blowing into it. When you blow air into a balloon, the air molecules inside the balloon are pushed closer together, increasing the pressure inside the balloon. As the pressure inside the balloon increases, the balloon stretches and expands to accommodate the extra air.

The balloon is made of a flexible material, such as rubber or latex, which allows it to stretch and expand as the pressure inside it increases. The balloon's material has elastic properties, which means that it returns to its original shape when the pressure is released.

The process of blowing air into a balloon can be compared to filling a tire with air. As you inflate a tire with a pump, the air molecules inside the tire are pushed closer together, increasing the pressure inside the tire. This causes the tire to expand and become larger, until it reaches the desired pressure.

In summary, a balloon expands as you blow into it because of the increase in pressure inside the balloon caused by the air you are blowing into it. The balloon's material has elastic properties, which allows it to stretch and expand as the pressure inside it increases.

Answer: Priorities

Explanation:

Having integrity means that you live in accordance to your deepest values, you're honest with everyone, Honesty is the quality of being truthful and transparent in all interactions, whether personal or professional. And Respect ties both honesty and integrity together making priorities not considered a moral value because a value is something outside influences can't change, while priorities can change.

The speed of a 0.25 ball is 2√30 m/s. The result is obtained by using the formula for kinetic energy.

Kinetic energy is the energy of an object due to its motion. So, if an object is moving, it has kinetic energy.

The energy is equal to half mass of an object multiplied by the square of its velocity. The statement can be expressed as

KE = ½ mv²

Where

We have a ball with

Find the speed of the ball!

Using the formula for kinetic energy, the speed of the ball is

KE = ½ mv²

15 = ½ (0.25)v²

15 = 0.125v²

v² = 15/0.125

v² = 120

v = √(4×30)

v = 2√30 m/s

Hence, the speed of the ball is 2√30 m/s.

Leran more about kinetic energy here:

brainly.com/question/72216

#SPJ4

The car accelerates uniformly, the tire will not slip and it will make 1.051 revolutions in the given time.

Motion is the act of changing position or direction. It is a phenomenon that can be observed in everyday life, such as the movement of a person walking, the waving of a hand, or the rotation of the Earth. Motion is also seen in the physical world, where objects move in different directions and speeds.

The number of revolutions the tire makes during this motion can be calculated by dividing the distance travelled by the circumference of the tire.
Distance Travelled = 28.8 m/s x 5.7 s = 165.76 m
Circumference of the tire = π x Diameter of the tire = 3.14 x 50.6 cm = 158.3 cm

Number of revolutions = Distance Travelled / Circumference of the tire = 165.76 m / 158.3 cm = 1.051 revolutions

Since the car accelerates uniformly, the tire will not slip and it will make 1.051 revolutions in the given time.

To learn more about motion

https://brainly.com/question/26083484

#SPJ4

Modern engines need to deliver improved mechanical performance, and torque measurement helps them do this by increasing their accuracy and speeding up its rotation speed for efficiency assessments, some examples are:

The degree to which a measured value resembles a reference or well-known value is referred to as accuracy. For instance, if you measure a substance's weight in the lab and come up with a reading of 3.2 kg when the true or actual weight was 10 kg, your reading is inaccurate. Your measurement in this instance is quite far from the value that is already known.

The more traditional expression is "accuracy of measurement," which is defined as "... the degree to which the outcome of a measurement agrees with the true value" on an international scale.

Depending on the engine speed, both engine power and torque are indicators. Effective and energy-saving driving is made possible by high torque. Fast acceleration and a high top speed are made possible by an engine with high power.

To know more about torque visit:

https://brainly.com/question/6855614

#SPJ4

Answer:

when an electrically charged particle vibrates. This causes a vibrating electric field, which in turn creates a vibrating magnetic field.

Explanation:

An electromagnetic wave begins when an electrically charged particle vibrates. This causes a vibrating electric field, which in turn creates a vibrating magnetic field. The two vibrating fields together form an electromagnetic wave.

The speed of the car2 after the collision is 6 m/s . The direction is towards the right.

We have to note that the momentum of the object would have to be the product of the mass and the velocity of the object. In the case of the cars that we have we have to recall that; Car 1 has a mass of 8.0 kg and is moving left at 3.75 m/s. Car 2 has a mass of 5.5 kg and is moving right at 2.00 m/s.

We already know that;

Momentum after collision = momentum before collision

(8 * 3.75) + (5.5 * 2) = (8 * 1) + (5.5 * v)

v = final speed of car 1

Then we have;

30 + 11 = 8 + 5.5v

v = 6 m/s

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

Answer:

The greater the object's surface area, the more air resistance it encounters.

Explanation:

Terminal velocity is the point at which the force of air resistance is equal to the force of gravity acting on an object. An object with a greater surface area will encounter more air resistance and therefore have a lower terminal velocity.

The greater the object's surface area, the more air resistance it encounters. Hence, its velocity decreases with increasing surface area.

Velocity is a physical quantity that measure the distance covered by an object per unit time. Velocity is the rate of speed and it is a vector quantity. Velocity of an object is affected by its mass, physical state, surface area, temperature etc.

As the mass increases, the velocity of a a falling object will be greater because, the gravitational force towards the massive object is greater and it falls rapidly.

As the surface area of the object increases, the air resistance that it encounters also increases. This air resistance acts as an opposition and decreases its velocity.

Find more on velocity :

https://brainly.com/question/18084516

#SPJ2

The place of a north equatorial current is taken by the Monsoon Current. There is, however, an South Equatorial Current.

The South Equatorial Currents are ocean currents in the Pacific, and Atlantic, loose westerly with the trades north of latitude 22° S, it divides to form the East Africa Coastal Current, operating northward, and a south-flowing stream. correctly, equatorial-current systems comprise two westward-flowing currents approximately 600 miles

The North Equatorial Current (NEC) is a westward wind-driven current mostly detected near the equator, but the location varies from dissimilar oceans. Trade winds drive both North and South Equatorial Currents westward, thus conveying warm ocean-surface waters in that direction.

So we can conclude that The South Equatorial Current is a broad, westward flowy current that extends from the surface.

Learn more about currents here: https://brainly.com/question/24858512

#SPJ1

The total work done on the crate can be determined by calculating the work done by each force separately and then adding them together.

1. Work done by the applied force Fp = (Fp * cos(theta)) * d

where Fp = 87 N, theta = 38 degrees and d = 36 m

cos(theta) = cos(38) = 0.81915

Work done by Fp = (87 N * 0.81915) * 36 m = 2789.5 J

2. Work done by the friction force FFR = -(FFR * d)

where FFR = 51 N and d = 36 m

Work done by FFR = -(51 N * 36 m) = -1836 J

3. Work done by gravity

Work done by gravity = forcedistancecos(theta)

force of gravity = mg

where m = 2.6 kg and g = 9.8 m/s^2

Work done by gravity = 2.69.836cos(90) = 0 J

4. The total work done is the sum of the work done by each force:

Total work done = work done by Fp + work done by FFR + work done by gravity

Total work done = 2789.5 J + (-1836 J) + 0 J = 953.5 J

The total work done on the crate is 953.5 J.

The magnitude of 4i 3j is 5 unit.

The definition of magnitude is the amount of a quantity. For example, the magnitude can be used to describe the difference in speed between a car and a bicycle. Additionally, it can be used to describe how far an object has traveled or how much of an object is represented by its magnitude.

To find the magnitude of a vector, we can use this following formula:

∥a∥ = √ ( x² + y² )

In this case, we are given that:

X = 4, Y = 3

Thus, the magnitude of the vector is:

∥a∥ = √ (4² + 3²)

∥a∥ = √25

∥a∥ = 5

To learn more about magnitude, click here:

https://brainly.com/question/14265216

#SPJ4

Assume for the moment that it shows a young child embracing her mother before he departs for a tour of service abroad. How would you employ science to analyse her effects.

What in physics is an energy?

The definition of energy is ability to do work," which is the capacity to apply a force that causes an item to move. organismal biology the study of sentient creatures Social science is the study of people and society.

photo of How might science be used for research,Students who study science get the chance to learn more about how and how things work. Children can learn about the environment they live in through science.

to know more about energy visit:

https://brainly.in/question/17419816

#SPJ4

Answer: The science I would use to study the impact of the father’s departure from her family would be interpretive sociology.

Explanation: The reason I chose this science is because it focuses on the cause of people’s actions.

The rotation angle is 114.65° or 2.00 rad.

Circular motion is described as the motion of an object rotating along a circular orbit. Circular motion can be either uniform or uneven. In uniform circular motion, the angular velocity and speed of rotation are constant, but in nonuniform motion, the rotation speed is constantly changing.

The rotation angle is 114.65° or 2.00 rad. The arc length is given by the formula:

L=[tex]\frac{phi}{360} * 2pir[/tex]

set value

r=1.5m, L=3m

Phi, angle = 114.65°

So the angle to rotate is 114.65° or 2.00 radians.

Learn more about angle

brainly.com/question/28979993

#SPJ4

Answer:Answer:

1.85m/s

Explanation:

initial velocity = 45km/h

final velocity = 65km/h

time = 3 minutes

we change that 45km/h is 12.5 m/s and 65km/h is 18.05 m/s

Formula:

acceleration = (final velocity - initial velocity)/time

Solution:

18.05-12.5=1.85m/s

Newton's second law for rotational motion tells us that angular acceleration is directly related to the net torque and inversely proportional to the moment of inertia.

Mathematically, it is given as, τ = I α

where, τ is torque, I is moment of inertia, α is angular acceleration

Moment of inertia is described as the resistance to the change in rotation. It is given by the formula, I = m r², where m is mass and r is radius

Torque is nothing but the force and lever arm that can cause an object's rotation. It is also called as moment of force. Its SI units are N.m.

To know more about torque:

https://brainly.com/question/29775827

#SPJ4

The peak value is 176.77 volts. The crest value is another name for the peak value.

The stable Potential Difference value that would produce the same amount of heat in a given resistance in a given time as A.C. voltage when maintained across the same resistance for the same time is known as the root mean square, or R.M.S. value, of Alternating voltage.

Impedance and switching speed are increased to reach the peak voltage. Peak voltage is calculated along the horizontal axis, at the so-called crest of the waveform at the top of the waveform.

The waveform thus reaches a positive peak value at 90 degrees and a negative peak value at 270 degrees in one full cycle. The peak value of an alternating waveform is the highest value it can reach in a single cycle.

Given:

RMS value = 125 volts

Peak value = RMS value × √2

Peak value = 125 × √2

Peak value = 176.77 volts

To know more about RMS value visit:

https://brainly.com/question/22974871

#SPJ4

Joules (1568) provide the potential energy.

Based on the force exerted on the two objects, the potential energy equation is determined. P.E. = mgh, where m is the mass in kilograms, g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface), and h is the height in meters, is the formula for gravitational force.

As a result of an object's position in relation to a zero position, potential energy is, in essence, the energy that is contained in the object. An object has gravitational potential energy if it is positioned at a height above (or below) the zero height.

Here m=20 kg

height h=8m

g= 9.8

Potential energy (P.E) = mgh

Potential energy (P.E) =  20*8*9.8

Potential energy (P.E) = 1568 J

Learn more about potential energy Visit: brainly.com/question/13997830

#SPJ4

On the fahrenheit scale, water boils at 212 degrees.

Conversion of temperature from celcius to fahrenheit is done by given formula:

                                              F = (9/5 × C) + 32.

where, C = temperature in celcius

            F = temperature in fahrenheit

We know that water boils at 100° C. Putting this value in above equation, we get F = 212.

Thus, 212 degrees Fahrenheit is the boiling point of water. At this temperature, water will begin to boil and turn into steam.

To know more about temperature visit:

https://brainly.com/question/14771622

#SPJ4