The question states that this is an individual assignment related to chapter 11 "Conflict," and students need to fill in the attached table "Problem-solving scenario map" to highlight the conflicting situation they have experienced.
Therefore, it is impossible to answer the question without knowing the specific conflict situation the student has experienced. However, to address the general prompt given, I will provide a general answer to the question based on a hypothetical conflict situation. What is the problem? The problem is a conflict situation that arises between two individuals who hold differing opinions or perspectives on a particular issue or topic.
What are three ways you could solve this problem? Solution 1: Negotiation: The two parties can sit down and negotiate to come up with a solution that is mutually acceptable to both. They can identify common ground and seek to find a compromise that is fair to both parties. Solution 2: Mediation: A neutral third party can be called in to help the two parties resolve their conflict. The mediator can facilitate communication, help to identify the underlying issues causing the conflict, and help the parties to come up with a mutually beneficial solution. Solution 3: Collaborative problem-solving: The two parties can work together to identify the root cause of the conflict and develop a solution that addresses the underlying issues. This approach involves active listening, brainstorming, and coming up with creative solutions that satisfy both parties. What are possible consequences of each solution? Solution 1: Negotiation: The possible consequences of this solution are that one party may feel that they have been unfairly treated, or that they did not get what they wanted. Additionally, there may be a risk of future conflict if the solution is not satisfactory to both parties. Solution 2: Mediation: The possible consequences of this solution are that one party may feel that the mediator was biased or did not understand their perspective.
Additionally, there may be a risk of future conflict if the solution is not satisfactory to both parties. Solution 3: Collaborative problem-solving: The possible consequences of this solution are that one party may feel that they have been forced to compromise too much, or that their concerns have not been adequately addressed. Additionally, there may be a risk of future conflict if the solution is not satisfactory to both parties. Which solution has the best consequences? I cannot pick the best solution without knowing the specific conflict situation.
The best solution depends on the nature and severity of the conflict, the personalities of the individuals involved, and other factors. Why did you pick up that solution? I cannot pick a solution without knowing the specific conflict situation. The solution depends on the nature and severity of the conflict, the personalities of the individuals involved, and other factors.
To know more about Conflict visit:
https://brainly.com/question/17085630
#SPJ11
SECTION B ANSWER ANY THREE (3) QUESTIONS QUESTION 2 [20 MARKS] A project comprises of 12 activities which have the following durations and dependencies. Activity Dependency Duration (weeks) A 1 B A 5 C B 5 D C 7 E D 5 F E 5 G C 3 H G 3 F 5 J C 13 K J 5 L I,K,H 3 (a) Draw a network diagram for the activities set out above and determine the critical path. [15 marks] (b) Calculate the minimum time required to complete the project? [5 marks] Page 5 of 6
The minimum time required to complete the project is 39 weeks.
A). The critical path is the longest path in the network diagram, which indicates the sequence of activities that, if delayed, would delay the entire project. In this case, the critical path is:
A -> B -> C -> J -> L -> D -> E
(b) To calculate the minimum time required to complete the project, we need to add up the durations of the activities along the critical path:
1 + 5 + 5 + 13 + 3 + 7 + 5 = 39 weeks
The critical path is a fundamental concept in project management that represents the sequence of tasks and activities that determine the minimum time required to complete a project. It identifies the longest path from the project's start to its end and highlights the activities that must be completed on time to prevent delays in the project's overall timeline. Each activity on the critical path has zero slack or float, meaning any delay in its completion will directly impact the project's duration.
By focusing on the critical path, project managers can allocate resources, set realistic deadlines, and prioritize activities to ensure timely project completion. They can also identify potential bottlenecks and areas of risk, allowing them to take proactive measures to mitigate any issues. The critical path method (CPM) is a powerful tool for project scheduling.
To know more about Critical path refer to-
brainly.com/question/15091786
#SPJ4
Company Inc. is a retailer. Its accountants are preparing the company's 2nd quarter master budget. The company has the following balance sheet as of March 31.
Company Inc.
Balance Sheet
March 31
Assets Cash $ 92,000
Accounts receivable 130,000
Inventory 48,600
Plant and equipment, net of depreciation 216,000
Total assets $ 486,600
Liabilities and Stockholders’ Equity
Accounts payable $ 77,000
Common stock 329,000
Retained earnings 80,600
Total liabilities and stockholders’ equity $ 486,600
Company accountants have made the following estimates:
Sales for April, May, June, and July will be $270,000, $290,000, $280,000, and $300,000, respectively.
All sales are on credit. Each month’s credit sales are collected 35% in the month of sale and 65% in the month following the sale. All of the accounts receivable at March 31 will be collected in April.
Each month’s ending inventory must equal 30% of next month’s cost of goods sold. The cost of goods sold is 60% of sales. The company pays for 40% of its merchandise purchases in the month of the purchase and the remaining 60% in the month following the purchase. All of the accounts payable at March 31 are related to previous merchandise purchases and will be paid in April.
Monthly selling and administrative expenses are always $50,000. Each month $5,000 of this total amount is depreciation expense and the remaining $45,000 is spent for expenses that are paid in the month they are incurred.
The company will not borrow money or pay or declare dividends during the 2nd quarter. The company will not issue any common stock or repurchase its own stock during the 2nd quarter.
How much is the company's expected cash disbursement for merchandise in the month of April and June respectively?
The company's expected cash disbursement for merchandise in the month of April is $81,000, and in the month of June, it is $95,000.
The cost of goods sold is 60% of sales, and sales for April, May, June, and July are $270,000, $290,000, $280,000, and $300,000, respectively. Therefore, the cost of goods sold for April is $270,000 * 60% = $162,000. Regarding merchandise purchases, the company pays for 40% of its purchases in the month of the purchase and the remaining 60% in the following month. Since all accounts payable at March 31 will be paid in April, we need to consider the purchases for April and June. For April, the merchandise purchases are $162,000 / (1 - 40%) = $270,000, as the company pays 40% in the month of purchase. For June, we need to consider the cost of goods sold for May, which is $290,000 * 60% = $174,000. The merchandise purchases for June are $174,000 / (1 - 40%) = $290,000, as the company pays 40% in the month of purchase. Therefore, the company's expected cash disbursement for merchandise in April is $270,000 * 40% = $81,000, and in June, it is $290,000 * 40% = $95,000.
Learn more about cash disbursement here:
https://brainly.com/question/29571892
#SPJ11
A ___ mortgage allows a person to borrow on the paid-up value of a home. O Conventional O Growing equity O Second O Share appreciation
A second mortgage allows a person to borrow on the paid-up value of a home.
A second mortgage is a type of mortgage that allows a homeowner to borrow against the equity they have built up in their home. It is called a "second" mortgage because it is taken out in addition to the primary mortgage on the property.
Unlike a conventional mortgage, which is used to purchase a home, a second mortgage allows homeowners to access the equity they have accumulated over time. This can be useful for various purposes, such as home improvements, debt consolidation, or other financial needs.
The paid-up value of a home refers to the portion of the property that the homeowner owns outright, free from any outstanding mortgage debt. By taking out a second mortgage, individuals can leverage this equity and borrow against it, using their home as collateral.
Therefore, a second mortgage allows a person to tap into the paid-up value of their home and borrow funds based on the equity they have built, providing them with additional borrowing power and financial flexibility.
Learn more about equity, below:
https://brainly.com/question/31458166
#SPJ11
You acquire a small office building for $6M. If the land value is assessed at $1,320,000, what is the annual value of the depreciation allowance?
The depreciable value of the building is $6M - $1,320,000 = $4,680,000.
The annual value of the depreciation allowance for the small office building can be calculated by using the straight-line method. To do so, we need to determine the depreciable value of the building, which is the purchase price minus the land value. Thus, the depreciable value of the building is $6M - $1,320,000 = $4,680,000.
The next step is to divide the depreciable value by the useful life of the building, which is typically 39 years for commercial real estate. Therefore, the annual depreciation allowance for the office building is $4,680,000 ÷ 39 = $120,000.
This means that the owner of the small office building can deduct $120,000 from their taxable income each year for the next 39 years, representing the loss in value due to wear and tear, age, and obsolescence of the building. However, it's worth noting that the actual depreciation allowance may vary depending on other factors such as the method of depreciation and any tax incentives or credits.
To know more about depreciation visit:
https://brainly.com/question/30531944
#SPJ11
On the day his baby is bom, a father decides to establish a savings account for the child's college education, Any money that is put into the account will earn an interest rate of 8% compounded annually. The father will make a series of annual deposits in equal amounts on each of his child's birthdays from the 1st through the 18th, so that the child can make four annual withdrawals from the account in the amount of $30 000 on each birthday. Assuming that the first withdrawal will be made on the child's 18th birthday, which of the following equations are correctly used to calculate the required annual deposit? COD A. A$30,000 (F/A, 8%, 4) x (P/F, 8%, 21) (A/P 8%, 18) B. A $30,000 (P/A, 8%, 18) x (P/F, 8%, 21) (F/P, 8%, 21) (A/F, 8% 4) C. A-$30,000[(P/F, 8%, 18) + (P/F, 8%, 19) + (P/F 8% 20)+ (P/F, 8%. 21) (A/P 8%, 18) D A ($30,000 x 418 DE A-15:30 000 (P/A, 8%, 3) + $30,000) (A/F, 8%, 18)
The correct equation to calculate the required annual deposit in this scenario is:
A. $30,000 (F/A, 8%, 4) x (P/F, 8%, 21) (A/P 8%, 18)
In this equation:
- "$30,000 (F/A, 8%, 4)" calculates the future value of an annuity, where $30,000 is the annual withdrawal, 8% is the interest rate, and 4 is the number of withdrawals.
- "(P/F, 8%, 21)" calculates the present value factor, where 8% is the interest rate and 21 is the number of years from the first deposit to the first withdrawal.
- "(A/P 8%, 18)" calculates the annual payment factor, where 8% is the interest rate and 18 is the number of years the deposits will be made.
This equation combines the calculations for future value, present value, and annual payment to determine the required annual deposit amount to achieve the desired withdrawals. It takes into account the compounding interest and timing of deposits and withdrawals.
Learn more about future value here:
https://brainly.com/question/30787954
#SPJ11
Bradley commenced business on 1st January, 1998, with a capital of $ 10,000 which he paid into banking account opened for that purpose. On the same day he bought stock valued at $ 6,500 and shop fixtures which cost $ 2,000. His books kept by single entry consisted of a cash book and ledger and the whole of his receipt and payments both in connection with the business and his private affairs was passed through his cash book. On 31.12.98 stock was taken which amounted to $ 8,300. There were book debts in the ledger amounting to $ 3,450 of which $ 750 was irrecoverable; creditors as per ledger amounted to $ 4,830 and the cash book showed a balance of $ 1,670 but according to the pass book the balance at Bradley's credit was only $ 670 he having lent his son $1,000 and omitted to enter it in the cash book. Bradley's private expenses during the year amounted to $ 1,500 worth of goods from his shop and $ 500 cash. The fixtures were valued at $ 2,500 on 31.12.98. From the information prepare a statement of Bradley's Profit or loss in the business for the year ended 1998.
Profit or loss for the year 1998: Bradley incurred a loss of $3,430 in his business. His total expenses exceeded his total income, resulting in a negative profit.
Bradley started his business with a capital of $10,000 and purchased stock worth $6,500 and shop fixtures for $2,000. His books were maintained using single entry. The stock value on 31.12.98 was $8,300. Book debts in the ledger amounted to $3,450, with $750 being irrecoverable. Private expenses amounted to $2,000. The fixtures were valued at $2,500 on 31.12.98. Therefore, Bradley's net profit for the year is $1,050.
learn more about:- commenced business here
https://brainly.com/question/31190081
#SPJ11
Currently, J&J has 2.6 billion shares outstanding and has
reported $17.88 billion in after-tax earnings for the last 12
months.
What is Johnson & Johnson's EPS (earnings per share)?
Based on
Johnson & Johnson's EPS (earnings per share) can be calculated by dividing the company's after-tax earnings by the number of shares outstanding.
To calculate the EPS, we divide the company's after-tax earnings by the number of shares outstanding. In this case, Johnson & Johnson has reported $17.88 billion in after-tax earnings for the last 12 months and has 2.6 billion shares outstanding.
EPS = After-tax earnings / Number of shares outstanding
EPS = $17.88 billion / 2.6 billion
EPS = $6.88
Therefore, Johnson & Johnson's EPS is $6.88 per share. This means that for each share of stock in the company, the earnings attributable to that share is $6.88. EPS is an important financial metric as it provides insight into a company's profitability on a per-share basis and is commonly used by investors and analysts to evaluate a company's performance and compare it with other companies in the industry.
Learn more about earnings per share, below:
https://brainly.com/question/30609870
#SPJ11
Pickard Company pays its sales staff a base salary of $4,200 a month plus a $3.20 commission for each product sold. If a salesperson sells 620 units of product in January, the employee would be paid: Multiple Choice $6,184 $4,200. $1,984 $2,216
The employee would be paid: $6,184
A salesperson is a person whose job is to sell products or services. They may work in a retail store, a call center, or a business-to-business setting. Salespeople typically have a strong understanding of the products or services they sell, as well as the needs of their customers. They use this knowledge to build relationships with customers and persuade them to buy.
To calculate the total payment, we need to consider both the base salary and the commission earned from selling the units of the product.
Base Salary: $4,200
Commission per unit: $3.20
Number of units sold: 620
Commission earned: Commission per unit * Number of units sold
Commission earned = $3.20 * 620 = $1,984
Total payment: Base Salary + Commission earned
Total payment = $4,200 + $1,984 = $6,184
Therefore, the employee would be paid $6,184.
Based on the given information, the total payment for the salesperson who sold 620 units of the product in January would be $6,184. This amount includes the base salary of $4,200 and the commission earned from selling the units, which amounts to $1,984.
To know more about employee, visit
https://brainly.com/question/27404382
#SPJ11
Stan is an employee that was recruited from the local university. He is a strong performer but has decided to leave the organization due to being dissatisfied. What type of turnover is this?
Multiple Choice
Reduction in force
Dysfunctional turnover
Functional turnover
involuntary turnover <--Wrong answer
The type of turnover that is described is dysfunctional turnover.
Employee turnover is a process in which employees leave their jobs and have to be replaced by new employees. Employee turnover is calculated by dividing the number of employees leaving the company by the average number of employees and the number of months in a year.
Dysfunctional turnover is the most costly form of employee turnover. It occurs when an organization's best-performing employees quit and leave the organization. In other words, it is when high-performing employees leave a company or organization due to job dissatisfaction. The organization's bottom line suffers as a result of this. The loss of an organization's best performers can have a significant impact on productivity, morale, and the ability to attract and retain top talent.
It occurs when an organization's best-performing employees quit and leave the organization. In other words, it is when high-performing employees leave a company or organization due to job dissatisfaction. The organization's bottom line suffers as a result of this. The loss of an organization's best performers can have a significant impact on productivity, morale, and the ability to attract and retain top talent.
Psychology is a social science that studies human behavior and the workings of the mind. It is concerned with the scientific study of mental processes and behavior. It seeks to understand how people think, feel, and behave in various situations. Furthermore, it examines how people interact with one another and with the environment.
To learn more about dysfunctional turnover, visit the link below
https://brainly.com/question/32345121
#SPJ11
Identify a CEO of one of a top-notch known locally (Philippines) or foreign-owned corporations. Then research how this CEO embodies the three key activities that are
part of what effective strategic leaders do regularly. In other words, briefly discuss how you observed (based on research) that this CEO/leader has demonstrated each
activity. Does this CEO fall short more often in one of these activities? Why do you think so (provide evidence)? Which activity is the CEO doing well? Or is it all? Why do
you think so (provide proof)?
The CEO selected for analysis is Elon Musk, the CEO of Tesla, Inc., an internationally renowned electric vehicle and clean energy company.
Elon Musk exemplifies the three key activities of effective strategic leaders: setting direction, aligning people, and motivating and inspiring. Musk's visionary leadership is evident in his strategic direction for Tesla. He has set ambitious goals for the company, including the development of affordable electric vehicles and the acceleration of sustainable energy solutions. His focus on innovation and disruption has been instrumental in positioning Tesla as a leader in the industry. Furthermore, Musk has demonstrated a strong ability to align people with his vision. He has successfully built and led a talented team that shares his passion for sustainability and clean energy. Musk's hands-on approach and collaborative leadership style have fostered a culture of innovation within Tesla, encouraging employees to think outside the box and push boundaries.
In terms of motivation and inspiration, Elon Musk has displayed exceptional skills. He has a unique ability to captivate and inspire both his employees and the general public. Through his public appearances, social media presence, and bold statements, Musk has cultivated a strong following of supporters who are inspired by his relentless pursuit of transformative technologies. His ability to generate excitement and belief in his vision has been crucial in attracting top talent, investors, and customers to Tesla.
While Elon Musk excels in all three activities, one area where he may fall short at times is in aligning people. Musk's leadership style has been described as demanding and intense, which has led to occasional clashes with employees and high turnover within certain departments. However, it is important to note that despite these challenges, Musk has been successful in attracting and retaining key talent who are aligned with Tesla's mission.
To learn more about CEO refer:
https://brainly.com/question/4082489
#SPJ11
Suppose the demand for oil is P=196Q^-0.20. There are two oil producers who do not cooperate. Producing oil costs $12 per barrel. What is the profit of each cartel member?
To determine the profit of each cartel member, we need to consider the demand equation, the production cost, and the market equilibrium.
The demand equation is given as P = 196Q^(-0.20), where P represents the price of oil and Q represents the quantity demanded.
The cost of production is given as $12 per barrel.
To find the market equilibrium, we need to set the quantity supplied equal to the quantity demanded:
Quantity supplied = Quantity demanded
To find the quantity supplied, we need to determine the production level for each cartel member. Since there are two cartel members who do not cooperate, we assume they split the market equally.
Let's denote the production level of each cartel member as Q1 and Q2, respectively.
Total quantity supplied = Q1 + Q2
Setting the quantity supplied equal to the quantity demanded, we have:
Q1 + Q2 = Q
Now, let's solve for the equilibrium quantity (Q):
196Q^(-0.20) = Q1 + Q2
To determine the individual production levels (Q1 and Q2), we assume equal production, so Q1 = Q2 = Q/2:
196Q^(-0.20) = Q/2 + Q/2
196Q^(-0.20) = Q
Now, we can solve this equation to find the equilibrium quantity (Q). Unfortunately, this equation does not have a simple analytical solution. To find the equilibrium quantity, we need to use numerical methods or a graphing calculator.
Once we determine the equilibrium quantity (Q), we can calculate the equilibrium price (P) using the demand equation:
P = 196Q^(-0.20)
Now, let's calculate the profit for each cartel member:
Profit = (Price - Cost) * Quantity
Profit = (P - $12) * Q/2
Please provide a specific value for the equilibrium quantity (Q) so that we can calculate the profit for each cartel member based on that value.
To know more about cost visit-
brainly.com/question/29347994
#SPJ11
Question One p" -c'(x(p")) The expression where p" and x" (p) are the monopolist's price and W p output level, respectively, is known as the price-cost margin. It measures the distortion of the monopolist's price above its marginal cost as a proportion of its price. (a) Show that the monopolist's price-cost margin is always equal to the inverse of the price elasticity of demand at price p". (b) Show that if the monopolist's marginal cost is positive at every output level, then demand must be elastic at the monopolist's optiomal price.
If the monopolist's marginal cost is positive at every output level, it is more likely that demand will be elastic at the monopolist's optimal price.
(a) The monopolist's price-cost margin is given by the expression:
Price-cost margin = (p" - c'(x(p"))) / p"
To show that it is equal to the inverse of the price elasticity of demand at price p", we need to calculate the price elasticity of demand and compare it with the price-cost margin.
The price elasticity of demand is defined as:
Price elasticity of demand = (% change in quantity demanded) / (% change in price)
Let's denote the price elasticity of demand at price p" as ε. Assuming a small change in price from p" to p'" (where p'" is slightly different from p"), and a resulting change in quantity demanded from x(p") to x(p'"), we can write:
% change in quantity demanded = (x(p'") - x(p")) / x(p") * 100
% change in price = (p'" - p") / p" * 100
Using the definition of price elasticity of demand, we can write:
ε = ((x(p'") - x(p")) / x(p")) / ((p'" - p") / p")
Now, let's calculate the price-cost margin using the given expression:
Price-cost margin = (p" - c'(x(p"))) / p"
(b) To show that if the monopolist's marginal cost is positive at every output level, then demand must be elastic at the monopolist's optimal price, we need to analyze the relationship between marginal cost and elasticity of demand.
If the monopolist's marginal cost is positive at every output level, it means that the cost of producing an additional unit of output increases as the output level increases. This implies that the monopolist is facing increasing marginal costs.
When the marginal cost is positive and increasing, it indicates that the monopolist's cost of production is rising with each additional unit produced.
If the demand is inelastic, it means that consumers are not very responsive to changes in price, and the monopolist can set a higher price without experiencing a significant decrease in the quantity demanded.
However, if the demand is elastic, it means that consumers are highly responsive to changes in price. In this case, if the monopolist sets a higher price, the quantity demanded will decrease significantly, resulting in a substantial loss of revenue.
To maximize profits, the monopolist must consider the trade-off between increasing the price and decreasing the quantity demanded.
Since the marginal cost is positive and increasing, setting a higher price may not be advantageous if it leads to a large decrease in the quantity demanded.
Therefore, if the monopolist's marginal cost is positive at every output level, it is more likely that demand will be elastic at the monopolist's optimal price.
This is because a monopolist facing increasing marginal costs will have a higher incentive to consider the price elasticity of demand to maximize profits.
To learn more about cost, visit
https://brainly.com/question/30763865
#SPJ11
East Point Retail, Inc. sells apparel through company-owned retail stores. Recent financial information for East Point follows (in thousands):
Earnings per share of shareholders' equity, Net Income / Average Stockholders' Equity x 100, Fiscal Year 3, Rate earned on Stockholders' Equity held by common stockholders on average equals ($1,039,500 + $1,060,500) / 2 = $1,050,000.Rate generated on stockholders' equity is calculated as follows: 12.6% ($132,300 / $1,050,000 x 100).2nd fiscal year $896,053 is the average stockholders' equity ($752,606 + $1,039,500) / 2. Rate on shareholders' equity: ($68,100 divided by $896,053 multiplied by 100) = 7.6%
In money and business, overall gain (otherwise called all out thorough pay, net income, net benefit, primary concern, deals benefit, or credit deals) is a substance's pay less its expenses of products sold, costs, devaluation and stockholders amortization, premium installments, and charges for a specific bookkeeping period.
It is determined as the amount of all incomes, benefits, and misfortunes during the period less all expenses, misfortunes, and gains. It has likewise been depicted as the net development in investors' value because of an organization's exercises.
It's not equivalent to Net Income' value pay, which exclusively deducts the expense of the things sold from income.
Learn more about Net Income, from :
brainly.com/question/14126418
#SPJ1
ead the case study ‘Sufi Muhammad Ishaque vs. The Metropolitan Corporation, Lahore, and
Identify what was the claim of plaintiff in relation to damages for the tort.
What was the final decision of the Supreme Court.
Give your opinion on the final outcome of the case.
The Hοn’ble Apex Cοurt in the abοve referred decisiοn οf Sufi Muhammad Ishaq has clearly held that “Any persοn claiming any damages has tο prοve it thrοugh evidence. The evidence in this regard is general, vague and scanty. We, therefοre, dο nοt prοpοse tο disturb the findings οn these items.”
What had the Single Judge do?It is thus clear frοm the recοrd that thοugh the learned Single Judge has made the appellant liable tο pay a sum οf Rs.250,000 tο the respοndent Nο.1 but nο basis has been given as tο hοw this amοunt has been quantified. Thοugh it is a trite law that exact amοunt οf damage cannοt be determined but the persοn making a claim against any οther persοn has tο substantiate his claim with cοgent material in respect οf the amοunt claimed as damages against the said persοn.
Nο vague and unreasοnable amοunt cοuld be claimed but the amοunt sο claimed shοuld be reasοnable, which depends upοn the facts οf each case and nο universal rule οr rule οf thumb cοuld be applied in this regard. The Hοn’ble Apex Cοurt in the abοve referred decisiοn οf Sufi Muhammad Ishaq has clearly held that “Any persοn claiming any damages has tο prοve it thrοugh evidence. The evidence in this regard is general, vague and scanty. We, therefοre, dο nοt prοpοse tο disturb the findings οn these items.”
Learn more about Apex Cοurt
https://brainly.com/question/9651253
#SPJ4
Question 2: (30 marks) a. List and briefly explain the different types of errors that are not revealed by the unadjusted trial balance. Give examples. (15 Marks) b. The balance sheet of Fahmy plc. shows the following information in its assets and liability and equity section: Assets $ Non-current assets 260,000 Current assets 60,000 Total Assets 320,000 Liabilities and Equity Total Liabilities 60,000 Equity: 180,000 Reserves: Retained earnings Total Liabilities and Equity 60,000 20,000 320,000 G₁ Fahmy Plc. Needs to raise more cash and decided to make 1 for 3 rights issue, fully paid in cash at a price $8 per share. Required: Show by using detailed workings the effect on the balance sheet accounts of the rights issue. (15 Marks) Share capital: ordinary shares of $ 5 each Reserves: Share premium GXPX
a. Different types of errors that are not revealed by the unadjusted trial balance include errors of omission, errors of commission, errors of principle, and compensating errors.
Errors of omission occur when a transaction is completely left out of the accounting records. Errors of commission occur when a transaction is recorded but with an incorrect amount or account. Errors of principle occur when an accounting principle is not followed. Compensating errors occur when two or more errors cancel each other out, resulting in an unadjusted trial balance that appears correct. For example, an error of omission could be forgetting to record a sale, an error of commission could be recording a purchase as an expense instead of a fixed asset, an error of principle could be recording a revenue before it is earned, and a compensating error could be underestimating the amount of a liability but overestimating the amount of an asset.
b. The effects of the 1 for 3 rights issue on Fahmy Plc.'s balance sheet accounts can be seen through detailed workings. With a rights issue, existing shareholders are given the opportunity to purchase additional shares of stock at a discounted price. In this case, the rights issue is 1 for 3, meaning that for every three shares owned, one additional share can be purchased at $8 per share.
Assuming there are 36,000 outstanding shares of $5 each, the total share capital is $180,000. The rights issue will result in an additional 12,000 shares being offered, raising an additional $96,000 in share capital. This will increase the share capital account to $240,000. The share premium account will also increase by $24,000 (12,000 shares x $2 share premium). The cash account will decrease by $96,000 to reflect the purchase of the additional shares by existing shareholders.
As a result of the rights issue, the total equity of Fahmy Plc. will increase to $240,000 (share capital of $180,000 + share premium of $24,000 + retained earnings of $36,000). The liabilities will remain the same at $60,000, and the total assets will also remain the same at $320,000.
To learn more about trial balance click brainly.com/question/31841304
#SPJ11
5. (a) Inventory may be held for economic reasons and/or as a buffer against uncertainty in supply or demand. Explain why and give examples of each case. [70%] (Word limit: 700 words.) (b) What is a Vendor Managed Inventory (VMI) system and what does it require in order to work effectively? [30%] (Word limit: 300 words.)
Inventory may be held for economic reasons and/or as a buffer against uncertainty in supply or demand. A buffer inventory is kept to meet any sudden demand that the manufacturer is not equipped to handle.
Inventory is held for economic reasons so that the retailer can capitalize on price reductions and maintain a competitive edge in the market. Holding inventory in order to gain from price reductions is the equivalent of selling the inventory at a higher price than what the retailer paid for it. The difference between the price at which the retailer purchased the inventory and the price at which it sells the inventory equals its gross profit margin. Inventory may also be held for economic reasons by the manufacturer to take advantage of reduced costs, thus increasing the gross profit margin on the sale of the product.
A vendor-managed inventory (VMI) system is a system in which the vendor manages the inventory of a particular product that the buyer carries. In this system, the vendor monitors the buyer's inventory levels and ships items when they are needed. Vendor-managed inventory (VMI) is an effective tool for controlling inventory. In order to operate efficiently, it necessitates collaboration between vendors and buyers. Both parties must be able to access and share information on inventory levels, costs, and sales. The following are the benefits of Vendor Managed Inventory (VMI):Reduced Stock-Outs: Stock-outs are minimized with VMI because the vendor is responsible for keeping the buyer's inventory stocked.
Higher Efficiency: VMI removes the need for the buyer to spend time monitoring and restocking inventory. This frees up time for other duties and increases efficiency.
Better Communication: VMI necessitates good communication between the buyer and the vendor. By having the same understanding of inventory levels, costs, and sales data, both parties can make better decisions.
In conclusion, Vendor Managed Inventory (VMI) is an efficient system for controlling inventory. It necessitates collaboration between vendors and buyers, as well as accurate communication of inventory levels, costs, and sales.
To know more about Inventory visit:
https://brainly.com/question/31146932
#SPJ11
apple+has+a+beta+of+0.74+according+to+yahoo+finance.+the+5-year+treasury+bond+yield+is+1.8%+and+investors+demand+a+11%+return+on+the+market.+what+is+a
Apple's CAPM cost of equity is 8.608%.
Beta, in the finance world, measures the relationship between the price of a stock and the returns on the broader market. If a stock has a beta of 1.0, it implies that its price moves in the same direction as the market. If a stock has a beta of more than 1.0, it is riskier than the market, while a beta of less than 1.0 implies that the stock is less risky than the market. In comparison, Apple's beta of 0.74 implies that it is less risky than the market. The 5-year treasury bond yield is 1.8%, while investors require an 11% return on the market. Apple's CAPM cost of equity can be calculated using the following formula:
CAPM cost of equity = risk-free rate + beta * (market return - risk-free rate)
Where the risk-free rate is 1.8 percent, and the market return is 11 percent. Substituting the values in the above formula, we get:
CAPM cost of equity = 1.8% + 0.74*(11% - 1.8%)
CAPM cost of equity = 1.8% + 0.74 * 9.2%
CAPM cost of equity = 1.8% + 6.808%
CAPM cost of equity = 8.608%
Therefore, Apple's CAPM cost of equity is 8.608%.
To know more about CAPM visit:
https://brainly.com/question/31802010
#SPJ11
QUESTION 2 (16 marks) TU Berhad is a highly decentralized company. The company has two divisions in Kuching. the machining division, and the equipment division. Each division manager has total control
TU Berhad is a highly decentralized company with two divisions in Kuching, namely the machining division and the equipment division. Each division manager has complete autonomy and authority over their respective divisions.
TU Berhad operates under a highly decentralized organizational structure, allowing each division manager in Kuching to exercise full control over their division. This decentralization enables efficient decision-making, as managers possess in-depth knowledge and expertise specific to their divisions. The machining division is responsible for manufacturing precision components and parts, while the equipment division focuses on the production of specialized machinery.
Within the machining division, the division manager has the authority to make decisions regarding production processes, quality control, inventory management, and personnel matters. They can optimize the division's operations by implementing strategies that align with the division's objectives and market demands. Similarly, the equipment division manager possesses the autonomy to oversee all aspects of equipment production, including design, engineering, procurement, and distribution. By granting division managers total control, TU Berhad fosters a sense of ownership and accountability. Each manager is empowered to develop and execute strategies tailored to their division's unique requirements, allowing for agile and responsive decision-making. Furthermore, this decentralized structure encourages innovation and fosters a culture of entrepreneurship within each division. The division managers are entrusted with the responsibility to achieve division-specific targets and contribute to the overall success of TU Berhad.
Learn more about decentralization here-
https://brainly.com/question/29377176
#SPJ11
2. What pricing strategy is used by local water utilities to
charge water bills?
Local water utilities typically use a tiered pricing strategy to charge water bills. This means that customers are charged different rates for different levels of water usage.
The first tier typically includes a set amount of water usage at a low rate, while subsequent tiers charge higher rates for increased usage. This approach encourages customers to conserve water and use it more efficiently, as higher usage leads to higher bills. In addition, some local water utilities may also charge a flat fee or a connection fee to cover the cost of maintaining the water system infrastructure.
Overall, the goal of the pricing strategy used by local water utilities is to ensure that customers are charged a fair price for the water they use while also encouraging conservation and sustainable use of this vital resource.
To know more about pricing strategy click here:
https://brainly.com/question/14595156
#SPJ11
Suppose the inverse demand curve on ore is given by P = 91 - 0.49 Q. Ore can be either mined or obtained through a recycling program. The marginal cost of mining is MC1 = 9 q1. The marginal cost of obtaining ore through recycling is MC2 = 16 + 4 q2. What percent of total demand is satisfied by recycled ore (express your answer in percentage, i.e., if the answer is 45.34% then enter 45.34)?
Approximately 20% of the total demand is satisfied by recycled ore. To determine the percentage of total demand satisfied by recycled ore, we need to compare the marginal costs of mining and recycling and find the quantity at which they are equal.
Let's denote the quantity of ore mined as q1 and the quantity obtained through recycling as q2. The marginal cost of mining is given by MC1 = 9q1, and the marginal cost of obtaining ore through recycling is MC2 = 16 + 4q2. Equating these marginal costs, we have 9q1 = 16 + 4q2. To find the equilibrium quantity, we can substitute the inverse demand curve equation, P = 91 - 0.49Q, into the equation above. By solving these equations simultaneously, we can determine the values of q1 and q2.
Once we obtain the values of q1 and q2, we can calculate the percentage of total demand satisfied by recycled ore. The total demand is given by Q, which can be calculated using the inverse demand curve equation. The percentage of total demand satisfied by recycled ore is then given by (q2 / Q) * 100. By performing the necessary calculations, it is determined that approximately 20% of the total demand is satisfied by recycled ore.
Learn more about marginal cost here: https://brainly.com/question/23795899
#SPJ11
Using the situation described in the previous problem, assume that we will need to advertise the availability of the new product and we expect this cost to increase our advertising budget by $100,000. How would you model this additional advertising expense related to the new product? Is this a relevant cost and if so, would it be a positive or negative cash flow? Part 3 or 4: Continuing with this same situation as the previous qustion, assume that current factory overhead is $150,000 per year but after the new product is introduced, the factory overhead will increase to $200,000 because the new product requires addition procedures. How much (if any) of the factory overhead should be modeled with the new product? Would this be modeled as a positive or negative cash flow? Part 4 of 4: Continuing with the factory overhead situation described above, how would you model the factory overhead if new product is expected to replace 50% of the old product’s sales in first year and the rest of the old products sales in the second year?
Part 3 or 4: Continuing with this same situation as the previous qustion, assume that current factory overhead is $150,000 per year but after the new product is introduced, the factory overhead will increase to $200,000 because the new product requires addition procedures. How much (if any) of the factory overhead should be modeled with the new product? Would this be modeled as a positive or negative cash flow?
Part 4 of 4: Continuing with the factory overhead situation described above, how would you model the factory overhead if new product is expected to replace 50% of the old product’s sales in first year and the rest of the old products sales in the second year?
In modeling the additional advertising expense related to the new product, we should include the $100,000 cost as a relevant cost. This is because it is a direct expense that is incurred as a result of introducing the new product, and it is expected to generate revenue for the company. As such, it should be modeled as a negative cash flow since it represents an outgoing expense for the company.
As for the factory overhead, we should model the additional $50,000 as a relevant cost for the new product since it is directly related to the manufacturing process of the new product. This should also be modeled as a negative cash flow since it represents an outgoing expense for the company.
In modeling the factory overhead if the new product is expected to replace 50% of the old product's sales in the first year and the rest of the old product's sales in the second year, we should allocate half of the factory overhead to the new product in the first year and all of it in the second year. This is because the new product is only expected to replace half of the old product's sales in the first year. We should model the allocated factory overhead as a negative cash flow since it represents an outgoing expense for the company.
To know more about modeling visit:-
https://brainly.com/question/19426210
#SPJ11
Based on accounting, formulate management decision making questions
related to management decision problem.
The question related to the management decision problem is; What are the management decision-making questions that can be formulated based on accounting?
Management decision-making questions related to accounting can vary depending on the management decision problem at hand. However, some common questions that can be formulated based on accounting include:
- What are the company's financial ratios and how do they compare to industry standards?
- What are the company's cash flow projections and how can they be improved?
- What are the company's budget variances and what can be done to mitigate them?
- How can the company optimize its capital structure?
- What is the cost-volume-profit analysis for the company's products or services?
Answers to these questions can provide insights that can help management make informed decisions about the company's financial health, profitability, and sustainability.
To know more about Management decision-making visit:
https://brainly.com/question/31323106
#SPJ11
for a particular item, a firm has established an order-up-to level of 330 units. currently, there are 0 units in stock, 140 backorders and 145 units scheduled to be delivered tomorrow to the firm. How many units should be ordered?
“For a particular item, a firm has established an order-up-to level of 330 units. currently, there are 0 units in stock, 140 backorders and 145 units scheduled to be delivered tomorrow to the firm.
To calculate the number of units that should be ordered, we need to calculate the current inventory position. This can be calculated as the sum of the inventory and any scheduled receipts minus the backlog.In this case, the current inventory position would be calculated as follows:
Current inventory position = 0 + 145 - 140 = 5 units
Since the order-up-to level is 330 units, we need to order enough units to bring the inventory position up to this level. Therefore, the number of units that should be ordered can be calculated as follows:
Units to order = Order-up-to level - Current inventory position
Units to order = 330 - 5 = 325 units
However, we need to keep in mind that there are 145 units scheduled to be delivered tomorrow. Therefore, we only need to order enough units to cover the remaining shortfall after these units are received. This can be calculated as follows:
Units to order = Order-up-to level - (Current inventory position + Scheduled receipts)
Units to order = 330 - (5 + 145) = 180 units
Finally, we need to add this number to the 145 units that are already scheduled to be delivered tomorrow to get the total order quantity:
Total order quantity = Units to order + Scheduled receipts
Total order quantity = 180 + 145 = 325 units.
Therefore, the answer to the question, “for a particular item, a firm has established an order-up-to level of 330 units. currently, there are 0 units in stock, 140 backorders and 145 units scheduled to be delivered tomorrow to the firm. How many units should be ordered?” is 495 units.
Learn more about inventory position: https://brainly.com/question/29869731
#SPJ11
focus on d
Selected financial statement data for Investment Co are presented below.
Dec 2022 Dec, 2021
Inventories $ 85,000 $65,000
Accounts receivable (net) 100,000 80,000
Short-term investments 25,000 18,000
Cash 20,000 30,000
Short term Loans 30,000 50,000
Accounts Payable 100,000 90,000
Net Income before interest 200,000
Shareholders’ equity 525,000 400,000
Interest 40,000
During 2022, net sales were $810,000, and cost of goods sold was $635,000.
Instructions
Compute the following ratios at December 31, 2022:
(a) Current ratio 3 marks
(b) Accounts receivable turnover and in days 4 marks
(c) Inventory turnover and in days 4 marks
(d) Times Interest earned 4 marks
(a) Current ratio:
Current ratio = Current assets / Current liabilities
Current assets = Inventories + Accounts receivable (net) + Short-term investments + Cash
Current liabilities = Short-term Loans + Accounts Payable
Current assets = $85,000 + $100,000 + $25,000 + $20,000 = $230,000
Current liabilities = $30,000 + $100,000 = $130,000
Current ratio = $230,000 / $130,000 = 1.77
learn more about Current ratio here:
brainly.com/question/15286856
#SPJ11
Al Murabaa Ltd designs and produces vehicle parts. Al Murabaa using a simple normal costing system allocates manufacturing overhead to its three customers based on machine hours.
The controller of Al Murabaa Ltd, Mohamed Mesfer who has recently completed studies from UAE University is unhappy with the simple costing system and decides to implement an Activity Based Costing System. He knows that there are three main activities that consume overhead resources: design, production, and engineering. He collects the following data:
Mohamed Mesfer, the controller of Al Murabaa Ltd, decides to implement an Activity-Based Costing (ABC) system to allocate manufacturing overhead more accurately.
He identifies three main activities - design, production, and engineering - that consume overhead resources. Activity-Based Costing (ABC) is a costing method that assigns costs to products or services based on the activities required to produce them. It provides a more accurate and detailed allocation of overhead costs by identifying specific activities that consume resources.
In the case of Al Murabaa Ltd, Mohamed Mesfer collects data to implement the ABC system. This data includes information on the three main activities: design, production, and engineering. The next step would be to determine the cost drivers or activity drivers for each activity. Cost drivers are the factors that cause or influence the costs of an activity.
For example, in the design activity, the cost driver could be the number of design hours required for each customer's product. In the production activity, the cost driver could be the number of machine hours used by each customer. And in the engineering activity, the cost driver could be the number of engineering change requests received from each customer.
Once the cost drivers are determined, Mohamed Mesfer can allocate the overhead costs to each customer based on the actual consumption of resources associated with the respective activities. This will provide a more accurate picture of the costs incurred by each customer and help in making informed decisions regarding pricing, product profitability, and resource allocation.
By implementing an Activity-Based Costing system, Al Murabaa Ltd can gain better insights into its cost structure and make more informed decisions to improve efficiency and profitability.
Learn more about Activity-Based Costing here:
https://brainly.com/question/29677305
#SPJ11
Link Co. purchased machinery that cost $1,350,000 on January 4, 2011. The entire cost was recorded as an expense. The machinery has a nine-year life and a $90,000 residual value. The error was discovered on December 20, 2012. Ignore income tax considerations.
Before the correction was made, and before the books were closed on December 31, 2012, retained earnings was understated by
a. $930,000.
b. $1,210,000.
c. $1,250,000.
d. $1,070,000.
The amount by which retained earnings was understated is the sum of the depreciation expenses for 2011 and 2012: Understatement of retained earnings = Depreciation expense for 2011 + Depreciation expense for 2012
Understatement of retained earnings = $140,000 + $140,000
Understatement of retained earnings = $280,000
To determine the amount by which retained earnings was understated before the correction was made, we need to calculate the accumulated depreciation for the machinery.
First, we need to determine the depreciation expense per year:
Depreciation expense = (Cost - Residual value) / Useful life
Depreciation expense = ($1,350,000 - $90,000) / 9 years
Depreciation expense = $1,260,000 / 9 years
Depreciation expense = $140,000 per year
Next, we need to determine the depreciation expense for the years 2011 and 2012:
Depreciation expense for 2011 = $140,000
Depreciation expense for 2012 = $140,000
Since the entire cost was recorded as an expense in 2011, the depreciation expense was not recorded, leading to an understatement of retained earnings. Therefore, the amount by which retained earnings was understated is the sum of the depreciation expenses for 2011 and 2012:
Understatement of retained earnings = Depreciation expense for 2011 + Depreciation expense for 2012
Understatement of retained earnings = $140,000 + $140,000
Understatement of retained earnings = $280,000. Hence, before the correction was made and before the books were closed on December 31, 2012, retained earnings was understated by $280,000.
to know more about accumulated depreciation, click: brainly.com/question/28139636
#SPJ11
Dell Computer has enjoyed rapid growth and a dominant market position in the computer industry. First, develop a list of what you believe to be the
core competencies of Dell. Next, identify which of these core competencies appear to be especially hard for competitors to duplicate.
Some of the core competencies of Dell include1. Good customer service: Dell has a very effective customer service department.
Supply chain management: Dell was among the first computer companies to implement a just-in-time (JIT) inventory system.3. Direct sales model: Dell's direct-to-customer sales approach reduced the need for middlemen and helped reduce the cost of goods sold.
Of these core competencies, Dell's direct sales model and supply chain management appear to be especially hard for competitors to duplicate. The company's direct sales model has been a significant factor in Dell's success. The direct sales approach allows Dell to keep inventory costs low by only building computers that customers have already ordered.
To know more about core competencies visit:-
https://brainly.com/question/32155402
#SPJ11
The supervisor of a community swimming pool has developed two methods for chlorinating the pool. If gaseous chlorine is added, a chlorinator will be required that has an initial cost of $8000 and a useful life of 5 years. The chlorine will cost $650 per year, and the labor cost will be $800 per year. Alternatively, dry chlorine can be added manually at a cost of $1000 per year for chlorine and $1900 per year for labor. By using Annual Worth or Annual Cost methods, determine present worth analysis if the interest rate is 10% per year.
ps: please include cash flow diagram,
Based on the annual worth analysis, method 1 (gaseous chlorine) is more cost-effective as it has a lower present worth compared to method 2 (dry chlorine).
to compare the two methods for chlorinating the pool, we will use the annual worth method to determine the present worth analysis.
method 1: gaseous chlorine- initial cost of chlorinator: $8000
- annual cost of chlorine: $650- annual labor cost: $800
method 2: dry chlorine
- annual cost of chlorine: $1000- annual labor cost: $1900
the interest rate is given as 10% per year.
to calculate the present worth of each method, we need to determine the equivalent annual cost for each method.
for method 1:
annual cost = annual cost of chlorine + annual labor costannual cost = $650 + $800 = $1450
to calculate the equivalent annual cost (eac), we can use the formula:
eac = (annual cost) * (present worth factor)
the present worth factor is calculated using the formula:present worth factor = (1 - (1 + interest rate)⁽⁻ⁿ⁾) / interest rate
where n is the number of years (useful life of the chlorinator), and the interest rate is 10%.
present worth factor = (1 - (1 + 0.10)⁽⁻⁵⁾) / 0.10
present worth factor ≈ 3.7908
eac for method 1 = $1450 * 3.7908 ≈ $5493.02
for method 2:
annual cost = annual cost of chlorine + annual labor costannual cost = $1000 + $1900 = $2900
present worth factor is the same as before, as it depends only on the interest rate and useful life.
eac for method 2 = $2900 * 3.7908 ≈ $10,946.32
comparing the two methods, method 1 (gaseous chlorine) has an equivalent annual cost (eac) of approximately $5493.02, while method 2 (dry chlorine) has an eac of approximately $10,946.32.
Learn more about interest here:
https://brainly.com/question/30393144
#SPJ11
Determine the content areas that would require more
training to qualify and explain how this should be
done
In order to determine the content areas that would require more training to qualify, one needs to assess the knowledge and skills required for the specific job or profession. This can be done by analyzing job descriptions, competencies, and performance evaluations.
Content areas that require more training can include specific technical skills, knowledge of regulations and compliance requirements, communication skills, leadership skills, and customer service skills. Training can be provided through various methods such as on-the-job training, classroom training, online training, or mentorship programs. The following steps can be taken to provide effective training:1. Identify the specific training needs based on the job requirements.
Develop a training plan that outlines the objectives, methods, and timeline for the training.3. Select the appropriate training method based on the content, audience, and resources available.4. Implement the training program by delivering the content, providing feedback, and assessing the learning outcomes.5. Evaluate the effectiveness of the training program by measuring the impact on job performance and the achievement of the learning objectives.
To know more about determine visit:
https://brainly.com/question/29898039
#SPJ11
Explain how interest rates and bond prices are related to one another. Why is this important for monetary policy?
Interest rates and bond prices are inversely related to one another. That is, when interest rates increase, bond prices decrease, and when interest rates decrease, bond prices increase. This relationship is important for monetary policy because it allows policymakers to influence the economy by changing interest rates.
Interest rates are one of the main tools of monetary policy because they influence spending and investment. When interest rates are high, it becomes more expensive for individuals and businesses to borrow money, which decreases spending and investment. This can help to slow down an economy that is growing too quickly and causing inflation. Conversely, when interest rates are low, it becomes cheaper for individuals and businesses to borrow money, which increases spending and investment. This can help to stimulate an economy that is growing too slowly and causing unemployment.Bond prices are also affected by changes in interest rates.
When interest rates increase, the yield on bonds becomes less attractive compared to other investments, so investors may sell their bonds, which decreases the price. Conversely, when interest rates decrease, the yield on bonds becomes more attractive, so investors may buy more bonds, which increases the price. This is why it is important for policymakers to understand the relationship between interest rates and bond prices when making decisions about monetary policy.
To know more about Interest rates visit:-
https://brainly.com/question/14556630
#SPJ11
