The relation between the force and the angle is given by the formula, τ = r × F, where, r is the perpendicular distance, F is the force.
It is also described as the cross product of distance vector and force vector. Mathematically, τ = r × F = r F sinθ, where, θ is the angle between r and F.
For example, a force is applied to a particle free to rotate about a fixed axis. Force is divided into perpendicular and parallel components. Torque is pointed outward from the page and has the magnitude
τ = r F sinθ.
Newton-meters, sometimes known as N.m, are the SI units for torque. Although these units are the same as joules, torque isn't considered to be work or energy, therefore N.m should be used instead.
To know more about torque:
brainly.com/question/30187149
#SPJ4
What is the formula of 3rd law?.
A sailboat and its crew have a mass of 655kg. If the force on the boat is 895N, what is its acceleration?
To calculate the acceleration of the sailboat, we need to use Newton's second law of motion, which states that force equals mass multiplied by acceleration (F = ma).
Given that the force on the boat is 895N and the mass of the boat and crew is 655kg, we can rearrange the equation as follows:
a = F / m
where a = acceleration, F = force, and m = mass.
Plugging in the known values, we get:
a = 895N / 655kg
So, the acceleration of the sailboat is approximately 1.37 m/s².
It's important to note that this is only an approximation of the acceleration as the force acting on the sailboat may be subject to change due to wind, water currents, etc. This equation does not take into account the resistance of the water, which is also a force that will act on the boat and will affect its acceleration.
The acceleration of the sailboat is 1.37 m/s² if its crew has a mass of 655kg and the force on the boat is 895N.
According to Newton's Second Law of Motion, acceleration (gaining speed) happens when a force acts on a mass (object). Force is a product of mass and acceleration. An object with a mass changes its velocity in response to a push or pull.
Force is an external agent that has the power to alter the resting or moving state of a body. The measurement of a change in an object's velocity is called acceleration.
The acceleration of the sailboat can be calculated using the formula: acceleration = force /mass
In this case, the force is 895 N and the mass is 655 kg, so the acceleration would be:
Acceleration = 895 N / 655 kg = 1.37 m/s²
Hence we can say the acceleration is 1.37 m/s² if its crew has a mass of 655kg and the force on the boat is 895N.
Learn more about Newton's Laws of motion at:
https://brainly.com/question/28171613
What is the condition for two vectors 2i 3j 4k and parallel?.
Due to the parallel nature of the vectors 2i+3j-4k and 3i -aj +bk, a = -9/2 and b = respectively -6.
The type of tensor is a two-vector or bivector. also being the dual of a two-form, it is a linear functional that converts two-forms into real numbers. A two-vector is the result of a pair of vectors' tensor product. As a result, any two vectors can only be said to be collinear if they are either on the same line or parallel to one another in either the same or the opposite direction.
The vectors 2i+3j-4k and 3i-aj+bk are parallel.
2/3 = 3/-a = -4/b.
or. -2a = 9 => a =-9/2
And 2b = -12 => b= -12/2. = -6.
a = -9/2. , b= -6.
Learn more about vector Visit: brainly.com/question/356987
#SPJ4
Correct Question:
What is the condition for the vectors 2i+3j -4k and 3i -aj +bk to be parallel?
A particle is moving with a constant speed in a corkscrew tunnel (i.e., it is moving in a circle as it moves forward). When it exits the tunnel, what path will it follow?
When a particle is moving with a constant speed in a corkscrew tunnel, it is traveling in a circular path as it moves forward. The path followed by the particle is a combination of two motions: linear motion (forward) and circular motion (around the circle).
When the particle exits the tunnel, it will continue to follow the combined path it was on before, which is the path of a helix. The helix is a three-dimensional curve that is the result of combining circular and linear motions, that is, the particle will move forward in a straight line, but also continue to move in a circular path around that line. The shape of the helix is similar to a spiral staircase, as the particle moves forward, it also spirals around the center axis of the tunnel.
In summary, when the particle exits the corkscrew tunnel, it will continue to follow the path of a helix, which is the combination of linear and circular motion.
There are 2 charges (3 µC and 4 µC) located at (-4 cm, 0) and (4 cm, 0), respectively. A. Determine the magnitude and direction of the electric field at (8 cm, 0). B. Determine the magnitude and direction of the electric field at (0, 8 cm)
The magnitude and direction of the electric field at (0, 8 cm) is 7 µC downwards and towards the positive charge.
The electric field at (8 cm, 0) can be calculated using Coulomb’s law. This law states that the electric field is equal to the charge multiplied by the inverse of the square of the distance between the two charges.
This gives us a magnitude of E = (3 µC + 4 µC) / (8 cm)^2 = (7 µC) / (64 cm^2).
The direction of the electric field is from the negative charge to the positive charge.
The electric field at (0, 8 cm) can be calculated by using the same equation as for the electric field at (8 cm, 0). This gives us a magnitude of E = (3 µC + 4 µC) / (8 cm)^2 = (7 µC) / (64 cm^2).
However, the direction of the electric field at this point is different. At (0, 8 cm) the electric field has a vertical component and a horizontal component. The vertical component is downward, as this point is closer to the negative charge, and the horizontal component is towards the positive charge.
The magnitude and direction of the electric field at (0, 8 cm) is 7 µC downwards and towards the positive charge.
To learn more about electric field , click here:
https://brainly.com/question/15800304
#SPJ4
Which of the following systems
is a good example of potential
energy being transformed into
kinetic energy and back again?
The movement of a pendulum is a good example of potential energy being transformed into kinetic energy and back again.
Kinetic Energy: The energy of a body due to its motion is called kinetic energy.
Potential Energy: Potential energy is the energy that is stored in an object due to its position relative to some zero position. Electrostatic energy, Gravitational energy, etc. are some examples of potential energy.
When the pendulum is at its extremes, all the energy of the pendulum is converted into potential energy. And when it is at the center it has only kinetic energy. At other positions, the total energy is the sum of potential and kinetic. But the total energy of the pendulum is always conserved.
Learn more about energy conservation here:
https://brainly.com/question/24933254
The correct question is-
Give an example of a system where potential energy is transformed into kinetic energy and back again. Explain.
What is the rate of change rule?.
The rate of change function is defined as the rate at which one quantity changes in relation to another.
Simply said, the rate of change divides the amount of change in one item by the equivalent amount of change in another.
What is the yearly rate of change formula?Annual growth rates are computed by averaging revenue over a particular period.
The yearly growth rate formula divides an investment's or asset's final value by its starting value.
When you remove one from this amount, you get a decimal point, which may be converted to a percentage.
learn more about rate of change
brainly.com/question/1558547
#SPJ4
What gives both magnitude and direction?.
A quantity that possesses both magnitude and direction is referred to be a vector.
A quantity or phenomena is said to be a vector if it possesses two independent qualities, namely magnitude and direction. This quantity can also be denoted by its mathematical or geometrical representation, which is likewise denoted by the term. The concepts of velocity, momentum, force, electromagnetic fields, and weight are all examples of vectors that can be found in nature. In this particular scenario, each and every vector can be recast as a negative quantity. When followed by a negative sign, this suggests going in the other direction.
To learn more about vector, click here:
https://brainly.com/question/12937011
#SPJ4
how many wavelengths thick is a 1/2 mm thumbnail
how many wavelengths thick is 100 micrometer thick hair
The amount of wavelength of light thick is the thumbnail x/y.
Given:
Wavelength of light= x
Thickness of thumbnail= y
The amount of wavelength thick the thumbnail is x/y
What is wavelength?
Wavelength is the distance between identical points (adjacent peaks) in adjacent cycles of a waveform signal propagated in space or along a wire. In wireless systems, this length is usually given in meters (m), centimeters (cm), or millimeters (mm).To know more about wavelength, click the link given below:
https://brainly.com/question/4112024
#SPJ1
How many of order of magnitude are between a grain of and (~5 x 10-4 m) and the height of Mount Everet (~8. 8 x103 m)?
Answer: Order of magnitude is 4.
What is Magnitude?
-- In physics, magnitude is defined simply as “distance or quantity.”
-- It depicts the absolute or relative direction or size in which an object moves in the sense of motion.
-- It is used to express the size or scope of something.
-- In physics, magnitude generally refers to distance or quantity.
What is relative velocity?
-- The relative velocity is defined as the velocity of an object with respect to another observer.
-- It is the time rate of change of relative position of one object with respect to another object.
What is Height ?
-- the measurement from the bottom to the top of a person or thing
Learn more about mount everest from https://brainly.in/question/9701177.
#SPJ4
What is the value of 1 newton in KG?.
What are the x / y-components? I'd also like a step-by-step explanation please.
The x and y component of the vector are -18.32 m and 3.23 m respectively.
What are the x and y components of the vector?The x and y component of the vector is calculated by applying the following formula.
Bx = B cosθ
By = B sinθ
where;
B is the magnitude of the vectorBx is the x componentBy is the y componentθ is the angle of the vector measured above x axisThe vector is located in negative x direction but positive y direction.
The angle of the vector from x axis = 90⁰ - 80⁰ = 10⁰
Bx = B cosθ = -18.6 m x cos ( 10 ) = -18.32 m
By = B sinθ = 18.6 m x sin ( 10 ) = 3.23 m
Learn more about x and y components here: https://brainly.com/question/27996986
#SPJ1
Question 4 of 10
Which of the following changes occurs naturally in a system over time?
A. Becoming more organized
B. Becoming more efficient
C. Increasing in energy
OD. Increasing in randomness
Answer: D. Increasing in randomness.
Explanation: The concept related to this change is entropy. Entropy is a measure of the randomness or disorder in a system. According to the second law of thermodynamics, the entropy of an isolated system tends to increase over time. This means that natural processes often lead to an increase in randomness or disorder.
For example, imagine a container of gas molecules. Initially, the molecules may be confined to one side of the container, creating a region of higher concentration. However, over time, the gas molecules will naturally spread out and become more evenly distributed throughout the container. This increase in randomness or disorder corresponds to an increase in entropy.
What is the total pressure inside the tube assuming the volume of the tube remains constant?.
Answer :Total pressure = 7293.2 torr or 9.60 atm
What is volume ?
-- Volume is a measure of three-dimensional space.
-- It is often quantified numerically using SI derived units or by various imperial or US customary units.
-- The definition of length is interrelated with volume.
Total pressure = partial pressure of nitrogen + partial pressure of oxygen
The partial pressure due to nitrogen is determined using the equation of Gay-Lussac's law: P₁/T₁=P₂/T₂
P₁ = 760 torr = 1atm, T₁ = 28∘C = (273+28)K = 301k, P₂ = ?, T₂ = 310∘C =(310+273)K = 583K
P₂ = P₁ T₂/ T₁
P₂ = 760 * 583 / 301 = 1472.03 torr
The pressure due to Oxygen gas produced is calculated thus:
Balanced equation of the decomposition of Ag₂O at s.t.p. is as follows;
2Ag₂O ----> 4Ag + O₂(g)
2 moles of Ag₂O produces 1 mole of O₂
molar mass of Ag₂O = (2*108 + 16)g = 232g/mol
molar volume of gas at s.t.p. = 22.4L
2*232g i.e. 464g of Ag₂O produces 22.4L of O₂
5.57g of Ag₂O will produce 5.57g*22.4L/464g = 0.269L or 269mL of O₂
Using the General gas equation P₁V₁/T₁=P₂V₂/T₂
P₁ = 1atm = 760 torr, V₁ = 269mL, T₁=273K, P₂ = ?, V₂= 75mL, T₂ = 583K
P₂ = P₁V₁T₂/V₂T₁
P₂ = 760*269*583 / 75*273
P₂ = 5821.17 torr
Total pressure = (1472.03 + 5821.17) torr.
Learn more about partial pressure form https://brainly.com/question/14282471
#SPJ4
How many moles are in 10g of o2?.
As a result, 10 g of oxygen gas contains 0.3125 moles of oxygen.
One mole of oxygen gas is equivalent to one gram of molecules. As a result, one mole of O2 gas is equal to one gram of oxygen molecules. O2 has a molecular mass of 32 grams. Its volume at STP is 22.4 L; its molar quantity is around 8 L, according to our calculations. In 10.0 g of O2, there are 1.51 x 10^23 molecules of O2.
The symbol for the unit is mol.
The number of moles formula is written as follows.
Here : The formula for moles is as follows:
= Mass of material / Mass of one mole equals the number of moles.
= 10/ 1.51 x 10^23
= 0.3125
Learn more about moles Visit: brainly.com/question/13314627
#SPJ4
What is the output of following circuit
Answer: atmosphesracicallycongenial thats the answer write that to your paper
Explanation:output is an intelligent honor to know the science subjecsts and many more than the circuit
Suppose Labib is standing on the top of Burj Khalifa. If the ratio of the height of Burj khalifa and the radius of Earth is x. What is the ratio of Labib’s weight on the ground and on the top of Burj Khalifa?
1) x2
2) 1/(1 + x)2
3) 1 + x2
4) (1 + x)2
The ratio of Labib’s weight on the ground and on the top of Burj Khalifa is 4 [1 + x]²
What is weight?Weight is the gravitational force of attraction of the earth on an object.
What is the ratio of Labib’s weight on the ground and on the top of Burj Khalifa?Suppose Labib is standing on the top of Burj Khalifa. If the ratio of the height of Burj khalifa and the radius of Earth is x.
Let
h = height of Burj Khalifa and R = radius of earth.Now, the weight of Labib on the ground is the gravitational force of attraction of the earth on Labib when on the ground. It is given by
W = GMm/R² where
G = universal gravitational constant, M = mass of earth, m = mass of Labib and R = radius of earth.Also, Labib's weight at the top of Burj Khalifa is given by
W' = GMm/(R + h)² where
G = universal gravitational constant, M = mass of earth, m = mass of Labib R = radius of earth and h = height of Burj KhalifaSo, the ratio of Labib’s weight on the ground and on the top of Burj Khalifa is
W/W' = GMm/R² ÷ GMm/(R + h)²
= (R + h)²/R²
= [(R + h)/R]²
= [1 + h/R]²
= [1 + x]²
So, the ratio of the weight's is [1 + x]²
Learn more about weight here:
https://brainly.com/question/28876260
#SPJ1
A 2000 W immersion heater is used to heat 2 kg of water for 5 minutes. Calculate the final temperature of the water if its initial temperature was 23°C. What assumption have you made in your calculation? Specific heat capacity of water is 4200 J/(kg °C).
The final temperature of the water is 25.38°C when a 2000 W immersion heater is used to heat 2 kg of water for 5 minutes.
How to calculate final temperature?
The amount of heat energy added to the water can be calculated using the formula: Q = mcΔT, where Q is the heat energy, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
The heat energy added to the water is: 2000 W * 5 minutes = 10,000 J
So the change in temperature can be calculated as: Q = mcΔT = (2 kg) * (4200 J/kg°C) * ΔT = 8400 * ΔT
ΔT = Q / mc = 10,000 J / (2 kg * 4200 J/kg°C) = 2.38°C
Therefore, the final temperature of the water is: 23°C + 2.38°C = 25.38°C
Assumptions:
The water is isolated and no heat is lost to the surroundings.The specific heat capacity of water is constant.The immersion heater is 100% efficient, meaning no energy is lost as heat to the surrounding.To learn more about heat energy, visit: https://brainly.com/question/934320
#SPJ1
What is the probability that a random sample of N 45 oil changes results in a sample mean time less than 10 minutes?.
A random sample of N 45 oil changes has a 30% chance of taking less than 10 minutes to complete, according to the sample mean time.
Given that,
mean =
= 16.2 minutes
standard deviation =[tex]\sigma[/tex] = 3.3 minutes
n = 45
The sample size needs to be greater than or equal to 30. [tex]\mu[/tex]
A sample mean is a data set average. The sample mean can be used to compute a data set's central tendency, standard deviation, and variance. The sample mean can be used to compute population averages, among other things.
It is as simple as adding up the number of items in a sample set and then dividing that total by the number of items in the sample set to calculate the sample mean. The following formula can be used to calculate the sample mean using spreadsheet software and calculators:
Here, x is the sample mean, which tells us to add, xi is the total number of X-values, and n is the number of items in the data set.
Learn more about sample mean here:
https://brainly.com/question/26227836
#SPJ4
Within a certain type of tar called a neutron tar. The material at the center ha a ma denity of 1 × 10^18 kg/m^3. If a mall phere of thi material of radiu 1 ×10^-5 m were omehow tranported to the urface of the earth. What would be the weight of thi phere
The weight of the sphere would be 4.12 x 10^-6 N.
To calculate the weight of the sphere, we need to find the mass of the sphere first, using the equation:
mass = density * volume
The volume of a sphere can be calculated using the formula:
V = 4/3 * pi * r^3
where r is the radius of the sphere.
So,
mass = density * 4/3 * pi * r^3
mass = 1 x 10^18 kg/m^3 * 4/3 * pi * (1 x 10^-5 m)^3
mass = 4.19 x 10^-7 kg
Then we can use the weight formula which is :
Weight = mass * g
Where g is the acceleration due to gravity, which is 9.8 m/s^2.
Weight = 4.19 x 10^-7 kg * 9.8 m/s^2
Weight = 4.12 x 10^-6 N
So the weight of the sphere would be 4.12 x 10^-6 N.
For more questions like Sphere click the link below:
https://brainly.com/question/30047253
#SPJ4
Question
A certain type of tar is called a neutron star. The material at the center ha a ma density of 1 × 10^18 kg/m^3. If a mall sphere of this material of radius 1 ×10^-5 m were somehow transported to the surface of the earth. What would be the weight of this Sphere
Which statement best describes the gravitational force of an object? (1 point)
The farther away an object is, the greater its
ravitational force will be
The greater the object's mass, the less its gravitational force will be.
O The greater the object's mass and the closer It is, the greater itS gravitational force.
O The object only has gravitational force when it is on the surface of a massive body, such as Earth.
The greater the objects mass, and closer it is,the greater its gravitational force will be is the statement that best describe the gravitational force of an object.
According to the Newtons Law of Gravitation states that the gravitational force between two objects is directly proportional to the product of two objects masses. And inversely proportional to the square of the distance between two objects.
F=G(m1*m2/r*r)
F= force
G= gravitational constant
m1,m2= mass of object
r= distance between two masses.
Newton formula to measure gravitational force.
To know more about the topic please click here.
https://brainly.com/question/72250
What can auto salvage dealers use electromagnets for?
Electromagnets can be usefully employed by auto salvage to move scrap metal from one place to another place. Whenever the current is switched off the magnet loses its magnetism and the car falls back to the ground.
An electromagnet is a made coil that is associated with a ferromagnetic core. Whenever an electric current flows through the wire of the solenoid, it generates magnetic field similar to that of a magnet. Whenever the electromagnet is a solenoid which is wounded around a central iron core. The main advantage of an electromagnet over a permanent magnet is that we can quickly change the magnetic field by controlling the amount of electric current in the winding. The magnetic field which is created by an electromagnet is proportional to both the number of turns in the winding and the current in the wire.
Learn more about Electromagnet:
brainly.com/question/13730414
#SPJ4
What is the most accurate way to measure torque?.
A dynamometer, or "dyno" test, is the most common method for measuring an engine's torque and power. This test is typically performed by connecting an engine's output shaft to a resistive load setup.
What is torque?Torque is a force that can cause an object to rotate around an axis. In the same way that force causes an object to accelerate in linear kinematics, torque causes an object to acquire angular acceleration. Torque is measured as a vector quantity. Torque is a rotational or twisting force expressed as a force. Vehicle engines generate torque by rotating about an axis. It can be thought of as a vehicle's strength. Torque propels a sports car from 0 to 60 kmph in seconds. Torque is also what propels large trucks hauling heavy loads.
Here,
The most common method for measuring an engine's torque and power is with a dynamometer, also known as a "dyno" test. Typically, this test is carried out by connecting an engine's output shaft to a resistive load setup.
To know more about torque,
https://brainly.com/question/30284972
#SPJ4
What is the angle between 2i and 3j?.
The angle between 2i and 3j with y axis is 0.688.
The shortest angle at which we must rotate one of the vectors to the position of being co-directional with another vector is defined as the angle formed by a single point between two vectors. The angle between the tails of two vectors defines the distance between them. Either the cross product or the dot product (scalar product) can be used to find it (vector product).
The angle between two vectors always ranges from 0° to 180°, as you should be aware of. The angle formed by two lines with the x-axis as one of them and ax + by + c = 0 as the other is equal to = Tan^(-1)(-a/b). the angle formed by two lines, one of which is defined as y = mx + c.
A= 2i+3j
B=j
A.B= |A||B| cos theta
=[tex]\sqrt{19}[/tex]Cos Θ=2*0+3*1
Cos Θ =[tex]3/\sqrt(19)[/tex]
= 3/4.3589
=0.688
Θ = 0.688
Learn more about angle Visit: brainly.com/question/29404968
#SPJ4
Correct Question:
What is the angle between the vector A=2i+3j and y-axis?
If two identical conducting spheres are in contact, any excess charge will be evenly distributed between the two. Three identical metal spheres are labeled A, B, and C. Initially, A has charge q, B has charge -q/2, and C is uncharged.
Part A
What is the final charge on each sphere if C is touched to B, removed, and then touched to A?
Express your answers in terms of q. Enter your answers separated by commas.
Part B
Starting again from the initial conditions, what is the charge on each sphere if C is touched to A, removed, and then touched to B?
Express your answers in terms of q. Enter your answers separated by commas.
The three spheres' total charge will thus be A / (1/2). B: 0, C:0 A: 9, B:-1,C: 9\b. A: 1/2 B: 0, C:
What is the final charge on each sphere ?This indicates that the two spheres receive an equal distribution of the charge.
First off, we have:
Charge on sphere A
Sphere B: -q/2 charge
Sphere C: zero charge
Sphere B is initially contacted by sphere C. Since the two spheres' combined charge was.
When two conducting spheres come into contact, the charge is divided between them, making their potential equal.
V₁ = V2 8 = 8/2
where Q stands for the charge and C for the sphere's capacitance. The capacitance is the same for identical spheres, hence the preceding equation becomes Q1 = Q2.
Sphere B is initially contacted by sphere C. Given that the two spheres' combined charge was
- q/2 + 0 = - q/2
Each sphere will have a charge after contact that is half of this value:
q B = q C = (-q/2) * (1/2) = (-q/4)
Sphere A (charge of +q) is then touched by sphere C (charge of -q / 4). The total charge is therefore -q/4 + q = q*3/4.
Since the charge is evenly distributed, each sphere will get half of it:
Q A = Q C = Q_ = 1/2 * (3/4 * Q) = Q_ =
The three spheres' ultimate charge will thus be spherical was
q + 0 = q
Each sphere will have a charge after contact that is half of this value:
Q A = Q C = Q/2 = 1/2 * Q
Sphere B (charge of -q/2) is then touched by sphere C (charge of q/2). Thus, the total charge is equal to -q/2 + q/2/2.
. Thus, the total charge is equal to -q/2 + q/2/2 = 0.
Each sphere will get half of this charge since the charge is distributed equally, which translates to a charge of zero:
q {B} = q {C} = 0
The three spheres' total charge will thus be A / (1/2). B: 0, C:0 A: 9, B:-1,C: 9\b. A: 1/2 B: 0, C:
To learn more about spheres refer to:
https://brainly.com/question/12495663
#SPJ4
What is the formula of linear and angular momentum?.
Linear momentum (p) is defined as the mass (m) of an item multiplied by its velocity (v): p = m*v. Angular momentum (L) is defined as the distance of an item from a rotation axis multiplied by linear momentum: L = r*p or L = mvr.
What are linear and angular momentum?Linear momentum is a characteristic of objects that change their location with respect to a reference point. Angular momentum is a property of objects that change the angle of their position vector with respect to a reference point.
rotational momentum is a characteristic that characterises the rotating inertia of an item or set of objects in motion along an axis that may or may not pass through.
learn more about linear and angular momentum
https://brainly.com/question/4126751
#SPJ4
Can latency be removed?.
Latency cannot be completely removed.
Latency it is the inherent delay caused by the physical distance that data has to travel and the time taken for the data to be processed by the various devices and networks it passes through. However, latency can be minimized.
There are several ways to minimize latency, such as:
Using faster network devices such as switches and routersUsing a Content Delivery Network (CDN)Optimizing the routing of data packetsUtilizing technologies such as edge computingReducing the number of hops that data packets have to takeUsing low-latency protocolsUsing hardware and software that are designed to minimize latency.It is worth noting that minimizing latency is not always possible or practical, depending on the distance between the sender and receiver, the number of devices and networks involved and the complexity of the data being transmitted.
To know more about Latency click here:
https://brainly.com/question/28234702#
#SPJ4
I genuinely need help with this:
Puck B has six times the mass of puck A. Starting from rest, both pucks are pulled the same distance across frictionless ice by strings with the same tension.
Part A. Compare the final kinetic energies of pucks A and B
Part B. Compare the final speeds of pucks A and B
(a) The final kinetic energies of pucks A and B is compared as KA = 6KB. (option F)
(b) The final speeds of pucks A and B is compared as vA = 6vB. (option C)
What is the final velocity of the two pucks?The final velocity of the two pucks is calculated by applying the principle of conservation of linear momentum as shown below;
mAuA + mBuB = mAvA + mBvB
where;
mA is mass of puck AmB is mass of puck BuA is the initial velocity of puck AuB is the initial velocity of puck BvA is the final velocity of puck AvB is the final velocity of puck BSince both pucks started from rest, their initial velocity = 0
The final speed of puck A and puck B is calculated as;
0 = mAvA + mBvB
mass of puck B = 6mA
0 = mAvA + 6mAvB
mAvA = - 6mAvB
vA = -6vB
|vA| = 6vB
vB = vA/6
The final kinetic energy of puck A is calculated as;
KA = ¹/₂mA(vA)²
The final kinetic energy of puck B is calculated as;
KB = ¹/₂mB(vB)²
KB = ¹/₂(6mA)(vA/6)²
KB = (6/36) [ ¹/₂mA(vA)² ]
KB = 1/6 [¹/₂mA(vA)² ]
KB = 1/6 KA
KA = 6 KB
Learn more about final kinetic energy here: https://brainly.com/question/25959744
#SPJ1
How will the electrostatic force between two electric charges change if the first charge is doubled and the second charge is only one third of the original charge?.
The electrostatic force between the two electric charges will be reduced if the first charge is doubled and the second charge is only one third of the original charge.
What is electrostatic force?
Electrostatic force is a force of attraction or repulsion that exists between electrically charged particles. It is one of the fundamental forces of nature and is the result of a fundamental property of matter known as electric charge. Unlike gravity, electrostatic force can either attract or repel particles, depending on whether they have the same or opposite charges. The strength of the force is determined by the magnitude of the charges and the distance between them.
The electrostatic force between the two electric charges will be reduced if the first charge is doubled and the second charge is only one third of the original charge. This is because the electrostatic force is directly proportional to the product of the two charges, so if one charge is increased while the other is decreased, the overall electrostatic force will be reduced.
To learn more about electrostatic force
https://brainly.com/question/20797960
#SPJ4
Why is total momentum zero?.
Because momentum is a vector, a system's total momentum can be zero if there are multiple masses. A system of two objects with the same magnitude of momentum and moving directly toward one another, for example, will have a total momentum of zero.
What is momentum?The quantity of motion of the body is defined as momentum. It is measured by "mass velocity," because momentum depends on velocity, and it also depends on the direction of the body's motion. Momentum is a vector quantity because velocity is a vector and mass is a scalar quantity. Momentum equals mass multiplied by velocity. Momentum is defined as "mass moving." Because all objects have mass, if an object moves, it has momentum - its mass is in motion. Momentum is the amount of motion of a moving body, calculated as the product of its mass and velocity. Its formula is mass velocity.
Here,
Because momentum is a vector, the total momentum of a system can be zero if there are multiple masses. A system consisting of two objects with the same magnitude of momentum and moving in the same direction, for example, will have a total momentum of zero.
To know more about momentum,
https://brainly.com/question/22418297
#SPJ4
