What is/are the energy transformation(s) that take place when using a wind turbine to generate usable energy?.

Answer:

[tex]\huge\boxed{\sf R = 360\ ohms}[/tex]

Explanation:

Potential Difference = V = 9 V

Current = I = 0.025 A

Resistance = R = ?

V = IR (Ohm's Law)

V = IR

Divide I to both sides

[tex]\displaystyle \frac{V}{I} = R[/tex]

Put the given data

9/0.025 = R

360 ohms = R

OR

[tex]\rule[225]{225}{2}[/tex]

The answer is option C. A baseball is heading upward after being thrown at an angle.

Kinetic energy is a type of energy associated with motion. It is defined as the energy an object possesses due to its motion, and is dependent on both the object's mass and its velocity. The formula for kinetic energy is KE = 1/2 mv^2, where m is the mass of the object and v is its velocity.

Kinetic energy can be transferred between objects, and is often involved in collisions and other interactions. For example, when a moving object collides with another object, some of its kinetic energy may be transferred to the second object. Kinetic energy is an important concept in physics and is used in many real-world applications, such as in the design of vehicles, machines, and athletic equipment.

Learn more about kinetic energy, here:

https://brainly.com/question/22174271

#SPJ9

Answer:

Explanation:   In a series circuit, the output current of the first resistor flows into the input of the second resistor; therefore, the current is the same in each resistor. In a parallel circuit, all of the resistor leads on one side of the resistors are connected together and all the leads on the other side are connected together.

The medium determines the amplitude of the wave vibrations is the correct option (B) .

What is wave ?

Laminar and transverse waves are the two types of waves. Longitudinal waves are similar to those of sound in that they alternate between compressions and rarefactions in a medium, much like transverse waves in that the surface of the medium rises and falls.

What is transverse wave ?

The term "transverse wave" refers to motion in which all wave points oscillate along trajectories that are perpendicular to the wave's forward velocity. Transverse waves include electromagnetic (such as radio and light) and seismic S (secondary) waves. Surface ripples on water are another example.

In a transverse wave, the medium's particles vibrate up and down perpendicular to the wave's direction. In a longitudinal wave, the medium's particles vibrate back and forth parallel to the wave's direction.

Therefore, medium determines the amplitude of the wave vibrations is the correct option (B) .

Learn more about wave from the given link.

https://brainly.com/question/26116832

#SPJ1

The final velocity of the truck after the collision is -11.25 m/s.

In this collision, the total momentum of the system before the collision is equal to the total momentum of the system after the collision, since momentum is conserved. The total momentum of the system before the collision can be found by adding up the momenta of the car and truck.

The momentum of the car is given by:

= mass of car * velocity of car

= 1500 kg * 20 m/s = 30000 kg m/s (east)

The momentum of the truck is given by:

= mass of truck * velocity of truck

= 2500 kg * -30 m/s

= -75000 kg m/s (west)

The total momentum of the system before the collision is given by:

30000 kg m/s + (-75000 kg m/s) = -45000 kg m/s

The total mass of the system is given by:

total mass = mass of car + mass of truck = 1500 kg + 2500 kg = 4000 kg

The final velocity of the system is given by:

final velocity = -45000 kg m/s / 4000 kg = -11.25 m/s

Since the final velocity is negative, it means that the system is moving west, which is the direction of the truck's initial velocity.

Learn more about momentum  at:

https://brainly.com/question/18798405

#SPJ1

Answer: Vitamins

Explanation:

The answer to the question that follows in the space provided is

carbon dioxide + water + sunlight = glucose + oxygen.

Green plants produce their food in the presence of sunlight during photosynthesis. The process is only done by autotrophs.

They use carbon dioxide and water, which are inorganic components from the environment, to create glucose, and oxygen gas is released into the atmosphere.

Carbon dioxide +  water →   Glucose  +  Oxygen

Therefore, the correct option is

To learn more about photosynthesis, refer to the link:

https://brainly.com/question/13523849

#SPJ9

Car B's velocity as observed by the person on the side of the road is -6.0 m/s, which means that it is moving in the negative x-direction.

explain about velocity ?

Velocity is a physical quantity that describes the rate of change of an object's position with respect to time. In other words, it is the speed and direction of an object's motion. Velocity is a vector quantity, which means that it has both a magnitude (or size) and a direction.

the relative velocity formula, which gives the velocity of one object as observed by another object or observer:

velocity of B with respect to observer = velocity of B with respect to A + velocity of A with respect to observer

In this problem, we have:

velocity of A with respect to observer = +21.4 m/s (positive because it is in the positive x-direction)

velocity of B with respect to A = -27.4 m/s (negative because it is in the opposite direction to A's velocity)

(Note that we use a negative sign for the velocity of B with respect to A because they are moving in opposite directions.)

Using the formula, we get:

velocity of B with respect to observer = -27.4 m/s + 21.4 m/s = -6.0 m/s

Therefore, Car B's velocity as observed by the person on the side of the road is -6.0 m/s, which means that it is moving in the negative x-direction.

To learn more about velocity follow the given link: https://brainly.com/question/21729272

#SPJ1

Two charged objects are separated a distance d,  the position vector of the object 1 with respect to the object 2 is P21 = d/2(√3i -j).

It is assumed in the problem that the origin is taken into account when determining the position of object 2. As a result, we may decompose the position vector of object 1 into its x and y components.

So, we can see from the diagram that the position vector's horizontal component is dcos30. This component is known as the x component because it lines up with the positive x axis. Hence, x=dcos30. Once more, dsin30 is the vertical component of the position vector. This component is known as the y component because it is congruent with the negative y axis. Hence, y=dsin30.

As a result, the position vector can be expressed as,

⇒P21=xi^+y(−j^)

The values P21=dcos30i+dsin30(j) are substituted

Now, the values of cos30 are 3-1/2 and sin30 are 12.

In order to substitute the values, we obtain P21=3-2di12dj.

Now, if we take the common, we get P21 = d/2(√3i -j).

This is the position vector of the object 1 with respect to the object 2.

Learn more about Position vector:

https://brainly.com/question/20553230

#SPJ4

The angular velocity in rad/s are 4.7124 rad/s and the period of the motion is 1.333s.

a) Find angular velocity

Given

45 rpm that is rotations per min  converting it in to rad/s

we know that the angular displacement for one rotation is  2pi rad

45 rpm = 45*2pi/60

            = 4.7124 rad/s

So,the angular velocity is W = 4.7124 rad/s

b) We have relation between the angular velocity and time period is  

W = 2pi /T

T = 2pi/W

T = 2pi/4.7124 s

T = 1.333 s

Angular velocity is a physical quantity that describes the rate of change of the angular displacement of an object with respect to time. It is a vector quantity, and its direction is perpendicular to the plane in which the object is rotating. The magnitude of the angular velocity is given by the ratio of the angular displacement of the object to the time taken to complete the displacement. It is measured in radians per second (rad/s).

Angular velocity is an important concept in physics and is used in the study of rotational motion. It is used to calculate the centripetal force required to maintain circular motion and is also used to describe the motion of planets and other celestial bodies. In addition, angular velocity is used in engineering and mechanics to design and analyze rotating machines and devices.

To learn more about Angular velocity visit here:

brainly.com/question/29611817

#SPJ4

Due to years of practice and repetition, Marcus has most likely begun to use unconscious processes when swinging his golf club.

The unconscious is the process that proceeds outside the person's awareness and plays a major role in directing thoughts, feelings, behavior, and mental illness.

When Marcus goes to play golf, he steps up to his ball and swings the club without thinking at all about his technique, so the signs about the unconscious process.

Therefore, Marcus has most likely begun to use unconscious processes when swinging his golf club.

Learn more about the unconscious, here:

https://brainly.com/question/23683815

#SPJ9

The total displacement of the diagram in the velocity-time graph is 55 m.

To find total displacement from a velocity-time graph, the area under the curve of the graph is calculated.

Considering the given figure:

The area under the velocity-time graph is composed of two triangles ABF & DCE having area A₁ & A₂ respectively, and a rectangle BEIF having area A3.

The area of A₁ = (2- 0) × (5 - 0)/2 = 5 m

The area of A₂ = (10 - 5) × (10 - 6)/2 = 10 m

The area of A₃ = (5 - 0) * (10 - 2) = 40 m

The total area under the curve = A₁ + A₂ + A₃

The total area under the curve = 5 + 10 + 40 =

The total area under the curve = 55 m

Therefore, the total displacement is 55 m.

Learn more about displacement at: https://brainly.com/question/14422259

#SPJ1

The normal force is 53.3 N.

We have to note that the force that is acting on the object may be a single force or a system of forces. In this case, the force that is acting on the object would have many components including the normal force.

You must note that the normal force is the force that in a direction that is opposite to the weight of the object but does have the same magnitude as the weight of the object.

Thus we can see that the normal force is obtained from;

R = mgcosθ

m = mass

g = acceleration due to gravity

θ = angle

R = 6 * 9.8 * cos 25

R = 53.3 N

Learn more about normal force:https://brainly.com/question/30436126

#SPJ1

Answer: I am assuming you're asking for the cliff height, which is 24M

We can use the kinematic equations to find the horizontal and vertical components of the ball's velocity and its final position.

The initial velocity components are:

v_x = 33 m/s * cos(60∘) = 28.6 m/s

v_y = 33 m/s * sin(60∘) = 33 * √3/2 m/s

The displacement components can be found using the kinematic equation:

x = v_x * t = 28.6 m/s * 4.0 s = 114.4 m

y = v_y * t - 0.5 * g * t^2 = 33 * √3/2 m/s * 4.0 s - 0.5 * 9.8 m/s^2 * (4.0 s)^2 = 102.4 m - 78.4 m = 24.0 m

The ball lands on the edge of the cliff, so its height must be equal to h, or:

y = h

24.0 m = h

So, the height of the cliff is 24.0 m.

Correct order in formation of coal as heat and pressure are increased and moisture content is decreased is (B) peat, lignite, bituminous, anthracite.

Peat is the first stage in the formation of coal, and is made up of partially decomposed plant material with a high moisture content. As heat and pressure are increased, the moisture content decreases and the plant material becomes more compressed, leading to the formation of lignite. Lignite is a low-grade coal with a relatively low carbon content, and is often referred to as brown coal.

With further increases in heat and pressure, lignite is transformed into bituminous coal, which has a higher carbon content and is often used for electricity generation. Finally, with even greater heat and pressure, bituminous coal is transformed into anthracite, which is the highest grade of coal and has the highest carbon content.

The stages of coal formation are important to understand because different types of coal have different uses and properties. For example, anthracite is often used for heating because it burns very cleanly and efficiently, while bituminous coal is often used for electricity generation because it has a higher energy content.

Learn more about coal here:

https://brainly.com/question/30560160

#SPJ4

The force experienced by an object is 144.76 N.

O\ption B is correct.

A force is described as an influence that can change the motion of an object or that can cause an object with mass to change its velocity

The force can be calculated using the equation of force = change in momentum / time.

So, force = 1.52 kg·m/s / 0.0105 s = 145 N

Therefore, the answer is 144.76 N.

Some types of force available includes the following:

Learn more about force at: https://brainly.com/question/12785175

#SPJ1

Answer:

Explanation:

You want the magnitude and direction of the change in velocity from 65.0 m/s south to 20.0 m/s west.

The change in velocity can be represented by a vector from the initial velocity to the final velocity as shown in the attachment. The magnitude and direction of it can be found using the usual tools for solving triangles.

The magnitude of the change is the hypotenuse of a right triangle with legs 20 and 65. Its value is ...

  ∆ = √(20² +65²) = √4625 ≈ 68.007 . . . . m/s

The magnitude of the velocity change is ∆ = 68.0 m/s.

As the diagram shows, the direction of the change is west of north by an angle θ that satisfies ...

  tan(θ) = 20/65

  θ = arctan(20/65) ≈ 17.1027°

The direction of the change measured from east is 90° +17.1° = 107.1°.

The angle of the velocity change is about 107.1°.

__

Additional comment

These calculations are handled neatly by a vector calculator, as shown in the second attachment.

The water gauge pressure at location P is;

P p = 104525 Pa

We have been provided;

L = 4 cm = 0.04 m needle length

Water's viscosity; = 1 10(-3) Pa

r = 1 mm = 0.001 m Radius

v = 10 m/s is the speed.

The flow rate via a cylindrical pipe may be calculated using Poiseuille's equation for viscous liquid flow.

Q = (ΔP•πr⁴)/(8ηL)

Flow rate is now also written as;

Q = πr²v

Thus;

πr²v = (ΔP•πr⁴)/(8ηL)

This boils down to;

v = (ΔP•r²)/(8ηL)

Inserting the necessary values;

10 = (ΔP × 0.001²)/(8 × 10^(-3) × 0.04)

ΔP = (10 × 8 × 10^(-3) × 0.04)/(0.001²)

ΔP = 3200 Pa

This implies that;

P atm - P p = P

Where;

P p is the water gauge pressure at point P.

P atm is atmospheric pressure, which equals 101325 Pa.

Thus;

P p - 101325 = 3200

P p = 101325 + 3200

P p = 104525 Pa

Learn more about Poiseuille's equation from here;

https://brainly.com/question/15000879

#SPJ4

Answer:

calculate the expected time of arrival, we need to divide the total distance by the speed of the truck.

In this case, the expected time of arrival would be:

640 km ÷ 110 km/h = 5.82 hours

So the driver should be able to arrive at the destination within 6 hours if he can hold his current speed.

The number of amino acids different between sequence 1 and sequence 2 is 2.

The translations of sequence 1 and sequence 2 are different because:

Nucleotides are the building blocks of nucleic acids, such as DNA and RNA. They consist of a nitrogenous base, a sugar molecule (ribose or deoxyribose), and a phosphate group. The nitrogenous bases in nucleotides can be adenine, guanine, cytosine, or thymine (in DNA) or adenine, guanine, cytosine, and uracil (in RNA).

Nucleotides are linked together to form long chains, which make up the backbone of nucleic acids. The sequence of nitrogenous bases in nucleotides determines the genetic information stored in DNA.

Learn more on nucleotides here: https://brainly.com/question/1569358

#SPJ1

Answer:

F = G * (m1 * m2) / r^2

Explanation:

The relationship between mass and gravitational force is directly proportional. This means that as the mass of an object increases, the magnitude of the gravitational force acting on it also increases. The exact relationship can be described using Newton's law of universal gravitation, which states that the gravitational force between two objects is proportional to the product of their masses and inversely proportional to the square of the distance between them.

This relationship can be expressed mathematically as:

F = G * (m1 * m2) / r^2

where F is the gravitational force, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them.

This relationship makes intuitive sense: larger objects have a greater ability to pull other objects towards them, so the gravitational force they exert is stronger. On the other hand, as the distance between two objects increases, the gravitational force between them decreases, because the pull is spread out over a larger area.

Aɳʂɯҽɾҽԃ Ⴆყ ɠσԃKEY ꦿ

Kinetic energy depends οn the velocity of the object squared. This means that when the velocity of an οbject doubles, its kinetic energy quadruples.

The energy an οbject has as a result of motion is referred to as kinetic energy. If we want tο accelerate an object, we must exert force. To apply a force, we must wοrk hard. When the work is done, energy will have been transferred tο the item, causing it to move at a new, constant speed.

This equation demοnstrates the direct relationship between an object's kinetic energy and the square οf its speed. Therefore, for every twofold increase in speed, the kinetic energy will increase by a factοr of four. A threefold increase in speed will result in a nine-fοld increase in kinetic energy.

Learn mοre about Kinetic energy here:

brainly.com/question/25959744

#SPJ1

The material that was thrown out had an approximate initial velocity of 1.50-10⁵ m/s.

The following equation can be used to determine the ejected material's initial velocity under gravity's constant acceleration:

y is equal to v₀ x t x (1/2) a x t₂, where:

The values for y, a, and t are as follows: y is the vertical displacement (height) of the ejected material (3.00 10⁵ m); a is the acceleration caused by gravity on Io (1.80 m/s²); t is the time it takes for the ejected material to reach its maximum height (let's assume it is equal to 2 seconds for simplicity).

3.00×10⁵ m = v₀ ×2 s + (1/2) × 1.80 m/s² × (2 s)²

3.00×10⁵ m = v₀ × 2 s + 1.80 m/s² × 4 s²

3.00×10⁵ m = v₀× 2 s + 7.2 m/s²

v₀ = (3.00×105 m - 7.2 m/s²) / 2 s

v₀ = (3.00×105 m - 7.2 m/s²) / 2 s

v₀ = 1.50×10⁵ m/s

Learn more about velocity:

brainly.com/question/25905661

#SPJ1

The keys will land 19.32 meters away from the base of the cliff.

Assuming that there is no air resistance, the motion of the keys can be described using the equations of motion for constant acceleration.

The initial horizontal velocity of the keys is 6.0 m/s, and the vertical velocity is zero. The acceleration due to gravity is 9.8 m/s^2, and it acts vertically downwards.

The time taken for the keys to fall from the top of the cliff to the ground can be found using the equation:

h = 1/2 * g * t^2

where h is the height of the cliff (42 m), g is the acceleration due to gravity (9.8 m/s^2), and t is the time taken.

Rearranging this equation to solve for t, we get:

t =√(2h/g)

t =√(2*42/9.8)

t = 3.22 s

During this time, the keys will have travelled a horizontal distance equal to their initial velocity multiplied by the time taken:

d = v * t

d = 6.0 * 3.22

d = 19.32 m

Therefore, the keys will land 19.32 meters away from the base of the cliff.

Learn more on distance and velocity here https://brainly.com/question/26046491

#SPJ1

The potential energy of the box is 4180 kip-ft.

Potential energy is described as the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors.

The potential energy of an object can be calculated using the formula:

PE = mgh

In the scenario,

the mass of the box is m = 10000 pounds and

the height above the ground is h = 25 miles = 25 * 5280 feet = 132000 feet.

The acceleration due to gravity is g = 32.2 ft/s^2.

Substituting these values into the formula, wehave:

PE = mgh = 10000 * 32.2 * 132000 = 4.18 x 10^8 ft-lb

Converting this to kip-ft,

PE = 4.18 x 10^8 ft-lb / 1000 = 4180 kip-ft

Learn more about  potential energy at: https://brainly.com/question/1242059

#SPJ1

Unless A=B or unless either A or B is the empty set, AxB does not equal BxA. Students typically have no trouble understanding this because we define a cartesian product as an ordered pair, which implies that order would be important.

A plane's cartesian form is denoted by the formula ax + by + cz = d, where a, b, and c are the direction cosines normal to the plane and d is the distance from the origin to the plane.

If and only if the matching initial elements in both ordered pairs are the same, two ordered pairs are said to be equivalent. (ii) There will be mn elements in A B if there are m elements in A and n elements in B. This means that n(A B) if n(A) = m and n(B) = n.

Therefore, When the inner inverse fulfils P R (B ) B (A B) = 0 and (A B) B P R (B) = 0, it is implied that is closed and is the general solution.

Learn more about cartesian product here:

https://brainly.com/question/29298525

#SPJ1

The direction of the force is along the line joining the two charges, and its magnitude is approximately 1.44 x 10^-12 N.

Magnitude can be defined as  the maximum extent of size and the direction of an object.

The force on the electron can be found using Coulomb's law:

F = k * (q1 * q2) / r^2

where

In this case, the two charges have the same magnitude Q = 2 x 10^-7 C, so we can write:

F = k * [(Q * -Q) / (0.15 m)^2]

where the negative sign for one of the charges indicates that it has the opposite charge to the other. Simplifying this expression, we get:

F = k * (Q^2 / 0.0225)

F = (9 x 10^9 N*m^2/C^2) * (2 x 10^-7 C)^2 / 0.0225

F ≈ 1.44 x 10^-12 N

Therefore, the direction of the force is along the line joining the two charges, and its magnitude is approximately 1.44 x 10^-12 N.

Learn more about magnitude  here : brainly.com/question/30337362

#SPJ1

Expression for the electric potential a distance z away from the center of rod on the line that bisects the rod is [tex]V = k * Q / L * \int\limits {cos\theta / z \sqrt{(1 + L^2/4z^2 * tan^2\theta)} d\theta} \, dx[/tex].

The electric potential at a distance z from a point charge Q is given by:

V = k * Q / r

here

k is Coulomb constant and

r is distance from the point charge to the point.

For a thin rod of length L and charge Q, we can model it as a line of charge with linear charge density λ = Q/L. The electric potential at a distance z away from the center of the rod on the line that bisects the rod can be found by breaking the rod into infinitesimal charge elements and integrating the electric potential due to each element over the length of the rod.

Let's consider a small element of length dx located at a distance x from the center of the rod:-

[tex]dQ = \lambda * dx = Q/L * dx[/tex]

The displacement element to pt.:-

[tex]r = \sqrt{(x^2 + z^2)}[/tex]

The electric potential due to this element is:

[tex]dV = k * dQ / r = k * Q/L * dx / \sqrt{(x^2 + z^2)}[/tex]

Integrating this expression over the length of the rod, we get the total electric potential at a distance z away from the center of the rod on the line that bisects the rod:

[tex]V = \int\limits^(^-^L^/^2^)_L_/_2 {k * Q/L * dx / √\sqrt{(x^2 + z^2)}} \, dx[/tex]

To evaluate this integral,

[tex]u = x^2 + z^2, du/dx = 2x dx[/tex],

This can be further simplified:-

[tex]u = z^2 * tan^2\theta + L^2/4 * sec^2\theta[/tex]

[tex]V = k * Q / L * \int\limits {cos\theta / z \sqrt{(1 + L^2/4z^2 * tan^2\theta)} d\theta} \, dx[/tex]

To know more about potential please refer: https://brainly.com/question/24284560

#SPJ4

Answer:

The momentum of a 0.0231 kg bullet fired at 621 m/s is calculated by multiplying the mass of the bullet by its velocity:0.0231 kg * 621 m/s = 14.3 kg·m/sSo the answer is D. 14.3 kg·m/s.

Explanation:

Formula for momentum:

[tex]p=mv[/tex]

momentum(measured in kg*m/s) = mass(measured in kg) * velocity(measured in m/s)

__________________________________________________________

Given:

[tex]m=0.0231kg[/tex]

[tex]v=621m/s[/tex]

[tex]p=?[/tex]

__________________________________________________________

Finding momentum:

[tex]p=mv[/tex]

[tex]p=0.0231\times621[/tex]

[tex]p=14.3kg*m/s[/tex]

__________________________________________________________

Answer:

[tex]\fbox{Option D}[/tex]

Answer:ddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd

Explanation: