What measurement is equivalent to
1
2
3
yards?

A.
5 feet

B.
48 inches

C.
10,560 feet

D.
126 inches

The box starts at 13 and ends at 24, with a line at 17 inside the box. The whiskers extend from 5 to 30.

The box-and-whisker plot of the given data 15, 8, 5, 18, 20, 13, 30, 28, 9, 15, 17, 24, 15, 18, 26 is as follows:

Minimum: 5

First quartile: 13

Median: 17

Third quartile: 24

Maximum: 30

To draw the box-and-whisker plot, we first need to find the five-number summary of the data, which consists of the minimum, the first quartile, the median, the third quartile, and the maximum. The box represents the middle 50% of the data, with the bottom of the box at the first quartile and the top of the box at the third quartile.

The box starts at 13 and ends at 24, with a line at 17 inside the box. The whiskers extend from 5 to 30.

Learn more about box-and-whisker plot here

https://brainly.com/question/22651823

#SPJ4

To calculate a z-score for a variable, such as thumb length in millimeters, we take the raw score and divide it by the standard deviation of the variable.

Once we have calculated the z-score for thumb length, we need to interpret what it means. The interpretation of a z-score depends on the context and the characteristics of the distribution.

A z-score of 0 indicates that the raw score is equal to the mean of the distribution. A z-score of 1 means that the raw score is one standard deviation above the mean, while a z-score of -1 means that the raw score is one standard deviation below the mean.

For example, suppose we have a sample of thumb lengths and the mean length is 60 mm, with a standard deviation of 5 mm. If someone's thumb length is 70 mm, their z-score would be (70 - 60) / 5 = 2. This means that their thumb length is two standard deviations above the mean of the distribution. We can interpret this as meaning that their thumb length is relatively large compared to the average thumb length in the sample.

It's important to note that the interpretation of a z-score depends on the characteristics of the distribution, such as the mean and standard deviation. In different distributions, the same z-score may correspond to different raw scores and have different interpretations.

To know more about Standard Deviation here

https://brainly.com/question/16555520

#SPJ4

Answer:

x = 30

Rate of Change: + 30/day

Step-by-step explanation:

20 + 3x = 110

-20          -20

3x = 90

/3     /3

x = 30

A. The p-value is less than 0.05, we reject the null hypothesis that the scores are evenly distributed. We conclude that the scores are not evenly distributed.

B. The p-value to be less than 0.05. We can conclude that there is strong evidence to suggest that the mean scores of left-handed and right-handed students are different.

a) To test whether the scores are evenly distributed, employ the Chi-squared goodness-of-fit test. Our null hypothesis is that the scores are evenly distributed, and the alternative hypothesis is that they are not evenly distributed.

Calculate the expected frequencies for each category assuming even distribution. The total frequency is 150, so, expect 30 scores in each category if the scores are evenly distributed. The expected frequencies for each category are:

0≤x≤20: 30

20<x≤40: 30

40<x≤60: 30

60<x≤80: 30

80<x≤100: 30

Then, calculate the test statistic:

χ^2 = ∑(O-E)²/E

where O is the observed frequency and E is the expected frequency.

The degrees of freedom for this test is (number of categories - 1) = 4.

Using a chi-squared distribution table with 4 degrees of freedom and a significance level of 0.05, the critical value is 9.488.

The observed values and expected values for each category are:

Score Range | Observed Frequency (O) | Expected Frequency (E) | (O-E)²/E

0≤x≤20 | 21 | 30 | 2.1

20<x≤40 | 15 | 30 | 7.5

40<x≤60 | 32 | 30 | 0.2

60<x≤80 | 39 | 30 | 3.3

80<x≤100 | 43 | 30 | 4.3

The test statistic is:

χ² = 2.1 + 7.5 + 0.2 + 3.3 + 4.3 = 17.4

The p-value for this test is the probability of getting a chi-squared value of 17.4 or higher with 4 degrees of freedom. Using a chi-squared distribution table, we find the p-value to be less than 0.01.

Since the p-value is less than 0.05, we reject the null hypothesis that the scores are evenly distributed. We conclude that the scores are not evenly distributed.

b) To test whether there is a difference between the mean scores of left-handed and right-handed students, we will use a two-sample t-test with equal variances. Our null hypothesis is that there is no difference in mean scores between left-handed and right-handed students, and the alternative hypothesis is that there is a difference.

The test statistic for the two-sample t-test is:

t = (x-bar₁ - x-bar₂) / (sₚ * √(¹/n₁ + ¹/n₂))

where x-bar₁ and x-bar₂ are the sample means, sₚ is the pooled standard deviation, n₁ and n₂ are the sample sizes, and sqrt is the square root function.

The pooled standard deviation is calculated as:

sₚ = √(((n₁ - 1) * s₁² + (n₂ - 1) * s₂²) / (n₁ + n₂ - 2))

where s₁ and s₂ are the sample standard deviations.

Plugging in the values from the question, we get:

t = (70 - 60) / (√(198/30 + 198/30)) = 2.16

Find the p-value for this test to determine whether it is statistically significant. Utilizing a t-distribution table with 58 degrees of freedom (total sample size minus 2), and a significance level of 0.05, the critical value will be 2.001.

Since the calculated t-value of 2.16 is greater than the critical value of 2.001, we can reject the null hypothesis that there is no difference in mean scores between left-handed and right-handed students. We conclude that there is a statistically significant difference between the mean scores of left-handed and right-handed students.

The p-value for this test is the probability of getting a t-value of 2.16 or higher with 58 degrees of freedom. Using a t-distribution table or calculator, the p-value is less than 0.05.

Therefore, we can conclude that there is strong evidence to suggest that the mean scores of left-handed and right-handed students are different.

learn more about p-value: https://brainly.com/question/4621112

#SPJ1

For a well with diameter of 2 ft, the approximate head in the pumped well for steady-state condition and approximate drawdown is 61.5770 ft and 48.42 ft respectively. The computed value of transmissivity is 1516.8 ft²/day.

We have a well with 2 feet diameter penetrates vertically through a confined aquifer 50 ft thick. Well is pumped at 500 gpm. The drawdown in a well 50 ft away is 10 ft. The Hydrant capacity, Q

= 500 gpm

= 1.11405 ft³/s = 96250.032 ft³/day

[tex]k = \frac{ Q}{2πb( s_1 - s_2) }ln(\frac{ r_1}{r_2})[/tex]

Substitute all known values in above formula, [tex]= \frac{96250.032 ft³/day }{2π×50( 10 - 3) ln(\frac{ 100}{50})}[/tex]

= 3.51 × 10 ft/s

= 30.33 ft/day

Now, transmissivity, T = k× b

= 30.33 ft/day × 50 ft

= 1516.8 ft²/day

The approximate head in the pumped well for steady-state condition, [tex]h_r= r_1 - r_w [/tex] = 100 - 3 = 97

[tex]h_w = h_2 - (\frac{ Q}{2πb}) ln(\frac{r_2}{r_w})[/tex]

[tex]= 97- \frac{96250.032 \: ft³/day }{2π×50}ln(\frac{100}{3})[/tex]

= 61.5770 ft

The approximate drawdown in the well,

[tex]s_w = r_2 - h_w [/tex]= 100 ft - 61.5770 ft

= 48.42 ft

Hence, required value is 48.42 feet.

For more information about diameter, visit :

https://brainly.com/question/30460318

#SPJ4

One is the sum of the areas under the normal curves to the left and right of z.

For a normal distribution, the total area under the curve is 1. Therefore, if we can find the area to the left of z, we can subtract it from 1 to find the area to the right of z.

The area to the left of z can be found using a standard normal distribution table or a calculator. For example, if z is 1.5, the area to the left of z is 0.9332.

The area under the entire normal curve is 1. Therefore, the area to the left of z plus the area to the right of z must add up to 1.

Visually, we can think of the normal curve as being symmetric about its mean, which is located at [tex]z = 0[/tex]. As a result, the area to z's left and right are equal. Area to the left of z plus Area to the right of z equals

[tex]1/2 + 1/2 = 1[/tex] as a result.

[tex]1 - 0.9332 = 0.0668[/tex]

Therefore, the combined area is:

[tex]0.9332 + 0.0668 = 1[/tex].

This supports the notion that the entire area under the normal curve is 1.

As a result, the area under the normal curve to the left of z plus the area to the right of z together equal one.

To know more about combined area visit

https://brainly.com/question/15440654

#SPJ4

The solution to the inequality R + 19 < 9 is R < -10

Given the inequality in the question:

R + 19 < 9

The inequality R + 19 < 9 means that the value of "R" that we are looking for must be less than some number that will make the inequality true.

To solve for "R", we need to isolate the variable "R" on one side of the inequality.

We can isolate R on one side of the inequality by subtracting 19 from both sides:

R + 19 < 9

R + 19 - 19 < 9 - 19

Simplifying the above inequality, we get:

R < 9 - 19

R < -10

Therefore, any value of r that is less than -10 will make the inequality true.

Learn more about inequality here: https://brainly.com/question/30228778

#SPJ1

The orthocenter will lie in the interior of a(n) acute triangle.  In Euclidean geometry, the orthocenter is a point where the three altitudes of a triangle intersect.

All three angles in an acute triangle are less than 90 degrees.  If we draw the altitudes from each vertex, they will all intersect inside the triangle. Therefore, the orthocenter of an acute triangle will always be located in the interior of the triangle.

On the other hand, in an obtuse triangle, at least one angle is greater than 90 degrees. In this case, one of the altitudes will lie outside of the triangle, so the orthocenter will be located outside of the triangle.

Learn more about orthocenter

https://brainly.com/question/29576583

#SPJ4

Answer:

i don't have idea for answer

Step-by-step explanation:

i

don't

have

idea

for

answer

Kate will have a total of 38 dollars after 8 hours of work

Kate already has 5 dollars

Every hour (x) that she works, she makes 6 dollars

The total number of dollars that Kate will make after working for 8 hours can be calculated as follows

= 5 × 6

= 30

= 30 + 8

= 38

Hence Kate will make 38 dollars after working for 8 hours

Read more on hours here

https://brainly.com/question/5604322

#SPJ1

Answer:

2034.70 mm³

Step-by-step explanation:

Given:

radius = 18mm

height = 6mm

pi = 3.14

volume of a cone is computed by multiplying pi, radius raised to the 2nd power, and height, which has been divided by 3.

v = πr²h/3

v = 3.14 * (18mm)² x 6mm/3

v = 3.14 * 324mm²  x 2mm

v = 2034.72 mm³

volume rounded to the nearest tenth would be 2034.70 mm³

A workplace climate that encourages employee responsibility is one in which employees feel a sense of ownership and empowerment in their work. So, correct option is B.

This can be achieved in several ways, including setting clear objectives and goals, recognizing hard work and achievements, and encouraging teamwork and collaboration. When employees feel that they are a valued and integral part of the organization, they are more likely to take responsibility for their work and strive to achieve success.

One way to foster a sense of responsibility is to delegate authority to employees, giving them more control over their work and decision-making processes. This allows employees to take ownership of their work and feel empowered to make a positive impact on the organization.

When employees feel that their contributions are recognized and valued, they are more likely to take responsibility for their work and strive to achieve success.

Another way to encourage employee responsibility is to establish a culture of teamwork and collaboration. By working together towards common goals, employees are more likely to feel a sense of responsibility to their colleagues and the organization as a whole.

When employees are motivated by a sense of camaraderie and shared purpose, they are more likely to take ownership of their work and strive to achieve success.

So, correct option is B.

To learn more about workplace click on,

https://brainly.com/question/30584226

#SPJ1

To calculate the standard deviation of the returns on this stock, we first need to find the expected return and then calculate the variance before taking the square root.

Given the probabilities and returns for each economic state, let's compute the expected return:

Expected return = (Boom return × Probability of boom) + (Normal return × Probability of normal) + (Recession return × Probability of recession)

Since the probabilities of boom and recession are given as 20% and 25% respectively, the probability of a normal economy is 100% - (20% + 25%) = 55%.

Expected return = (0.32 × 0.2) + (0.14 × 0.55) + (-0.28 × 0.25) = 0.064 + 0.077 + (-0.07) = 0.071

Next, we calculate the variance:

Variance = Σ [Probability(i) × (Return(i) - Expected return)²]

Variance = (0.2 × (0.32 - 0.071)²) + (0.55 × (0.14 - 0.071)²) + (0.25 × (-0.28 - 0.071)²) = 0.049401 + 0.002555 + 0.045956 = 0.097912

Finally, we find the standard deviation by taking the square root of the variance: Standard deviation = √(0.097912) ≈ 0.313, The standard deviation of the returns on this stock is approximately 0.313, or 31.3%.

To know more about probability click here

brainly.com/question/15124899

#SPJ11

a.) The inverse of matrix A is [7 -4][-2 1].

b.) det(A) is zero, we know that A is not invertible.

Theorem 1.4.5 states that a matrix A is invertible if and only if its determinant, which is defined as ad-bc, is nonzero. If A is invertible, then its inverse A⁻¹ is given by the formula:

A⁻¹ = 1/det(A) * [d -b][-c a],

where det(A) = ad-bc is the determinant of A.

Now, let's use this theorem and the inversion algorithm to find the inverses of the given matrices:

a. A = [1 4][2 7]

First, we need to calculate the determinant of A:

det(A) = ad-bc = (1 * 7) - (4 * 2) = 1

Since det(A) is nonzero, we know that A is invertible. Now, we can apply the formula for A⁻¹:

A⁻¹ = 1/det(A) * [d -b][-c a]

= 1/1 * [7 -4][-2 1]

= [7 -4][-2 1]

b. A = [2 -4][-4 8]

Again, we need to calculate the determinant of A:

det(A) = ad-bc = (2 * 8) - (-4 * -4) = 0

Here the det is zero there is no invertible matrix for B.

To know more about matrix here

https://brainly.com/question/28180105

#SPJ4

The value of the double integral is zero.

To evaluate the double integral, we need to convert the Cartesian coordinates to polar coordinates since the region is a circle. Let's recall the formula for changing variables in double integrals:

[tex]$\iint_R f(x,y) dA = \iint_S f(r\cos\theta, r\sin\theta) r dr d\theta$[/tex]

where[tex]$R$[/tex] is the region in the [tex]$xy$[/tex]-plane and[tex]$S$[/tex] is the region in the [tex]r\theta$-[/tex]plane.

In this case, the region [tex]$D$[/tex] is a circle with center at the origin and radius [tex]$4$[/tex], so we have:

[tex]$\iint_D (6x-2y) dA = \int_0^{2\pi} \int_0^4 (6r\cos\theta - 2r\sin\theta) r dr d\theta$[/tex]

[tex]$= \int_0^{2\pi} \int_0^4 (6r^2\cos\theta - 2r^2\sin\theta) dr d\theta$[/tex]

[tex]$= \int_0^{2\pi} \left[3r^3\cos\theta - r^3\sin\theta\right]_0^4 d\theta$[/tex]

[tex]$= \int_0^{2\pi} (48\cos\theta - 64\sin\theta) d\theta$[/tex]

[tex]$= \left[48\sin\theta + 64\cos\theta\right]_0^{2\pi}$[/tex]

[tex]$= 0$[/tex]

Therefore, the value of the double integral is zero.

To know more about the double integral function,

brainly.com/question/31629349

#SPJ4

(complete question)

evaluate the double integral. (6x-2y)dA D is bounded by the circle with the center at the origin and radius 4. What to evaluate the integral for x and y.

Therefore, the value of the test statistic is 1.71.

The test statistic calculates the standard errors that separate the sample percentage from the predicted population proportion. The null hypothesis, which in this case is that the genuine proportion of readers who own the specific make of automobile is not greater than 58%, is stronger evidenced by a larger absolute value of the test statistic.

We must apply the following formula to determine the test statistic's value:

Z = (P - p) / (p*(1-p)/n), where P is the sample proportion, p is the hypothesised population proportion (0.58 in this case), n is the sample size (300), and sqrt stands for the square root.

By replacing the given values, we obtain the following result, which is rounded to two decimal places: z = (0.62 - 0.58), (0.58 * 0.42 / 300), z = 1.71.

The test statistic is positive, which indicates that the sample percentage of 62% exceeds the population proportion predicted by 58%. The difference between the sample proportion and the predicted population proportion is 1.71 standard errors distant from the mean, according to the value of 1.71. This indicates that the sample proportion is statistically significant at the 0.02 level, but in order to draw a firm conclusion, we must compare it to the critical value.

To know more about test statistic,

https://brainly.com/question/14128303

#SPJ11

The given statement "In queuing problems, service rates are generally described by the exponential distribution." is True because exponential distribution is used to model service rate of server in a queuing system.

In queuing theory, The exponential distribution is a continuous probability distribution that describes the time between two consecutive events in a Poisson process, where events occur randomly and independently over time.

In the context of queuing theory, the Poisson process can be used to model the arrival of customers to a system, and the exponential distribution can be used to model the time it takes for a server to complete a service for a customer.

Specifically, the exponential distribution assumes that the time to complete a service is a continuous random variable, and that the probability of completing a service in a given time interval is proportional to the length of that interval.

The exponential distribution is useful in queuing theory because it allows for the calculation of important performance measures, such as the expected waiting time and the probability of a customer having to wait in the queue, given the arrival rate of customers and the service rate of the server.

To learn more about queuing click on,

https://brainly.com/question/31059963

#SPJ4

The box in the center of a boxplot marks the range covered by the middle half of the data.

Specifically, it represents the interquartile range (IQR), which is the range between the first quartile (Q1) and the third quartile (Q3) of the data. The box covers the middle 50% of the data, with the median (or second quartile, Q2) represented by a horizontal line within the box.

The whiskers of the boxplot extend to the minimum and maximum values within 1.5 times the IQR from the nearest quartile. Any values outside of this range are plotted as individual points, or outliers.

What is data?

Data refers to any collection of facts, figures, or information that can be processed or analyzed to gain insights or knowledge. Data can take many forms, including numerical, categorical, textual, or multimedia.

To learn more about the data visit:

brainly.com/question/13650923

#SPJ11

In this question, we were given five relations and asked to determine if they are reflexive, symmetric, and/or transitive.

(a) The relation Ri on R is reflexive, symmetric, and transitive.

(b) The relation R on A is not reflexive, not symmetric, and transitive.

(c) The relation Rs on Z is not reflexive, not symmetric, and transitive.

(d) The relation R, on Z is not reflexive, not symmetric, and not transitive.

(e) The relation Rs on Z is reflexive, not symmetric, and transitive.

A reflexive connection is a relationship between items of a set A in which each element is related to itself. As the name implies, the image of each element of the set is its own reflection. In set theory, a reflexive relation is an essential concept.

(a) Ri is reflexive, symmetric, and transitive.

- Reflexive: For any x ∈ R, (x, x) ∈ Ri since |x - x| = 0 < 1.

- Symmetric: For any (x, y) ∈ Ri, we have |x - y| < 1, which implies |y - x| < 1. Therefore, (y, x) ∈ Ri.

- Transitive: For any (x, y), (y, z) ∈ Ri, we have |x - y| < 1 and |y - z| < 1. Adding these inequalities, we get |x - z| < 2, which implies (x, z) ∈ Ri.

(b) R is not reflexive, symmetric, or transitive.

- Not reflexive: For any x ∈ A, (x, x) ∉ R since x - x = 0 is not a positive integer.

- Not symmetric: For any distinct x, y ∈ A, if (x, y) ∈ R, then x - y = 1, which implies y - x = -1 is not a positive integer. Therefore, (y, x) ∉ R.

- Not transitive: Let A = {1, 2, 3} and R = {(1, 2), (2, 3)}. Then (1, 3) is not in R since 3 - 1 = 2 is not a positive integer.

(c) R3 is not reflexive, symmetric, or transitive.

- Not reflexive: For any x ∈ Z, (x, x) ∉ R3 since x * x = x^2 is not greater than 0.

- Symmetric: For any (x, y) ∈ R3, we have xy > 0, which implies yx > 0. Therefore, (y, x) ∈ R3.

- Not transitive: Let x = -1, y = 2, and z = -1. Then (x, y) ∈ R3 and (y, z) ∈ R3, but (x, z) = (-1, -1) ∉ R3 since xz = 1 is not greater than 0.

(d) R, is not reflexive, symmetric, or transitive.

- Not reflexive: For any y ∈ Z, (y, y) ∉ R, since 3 does not divide y + 2y = 3y.

- Not symmetric: For y = 1 and z = 2, we have (2, 1) ∉ R, but (1, 2) ∈ R since 3 divides 1 + 4 = 5.

- Not transitive: Let x = 2, y = 1, and z = 5. Then (x, y) ∈ R, (y, z) ∈ R, but (x, z) = (2, 5) ∉ R since 3 does not divide 2 + 10 = 12.

(e) Rs is the relation on Z given by Rs = {(x,y) ⬠Zx Z: there exists k ⬠N such that elyk and yak).

- Reflexive: This relation is not reflexive because (1, 1) ∉ Rs as there does not exist k such that 1 x k = 1.

- Symmetric: This relation is not symmetric because, for example, (1, 2) ∈ Rs but (2, 1) ∉ Rs since there does not exist k such that 2 x k = 1.

- Transitive: This relation is not transitive. For example, let x = 1, y = 2, and z = 4. Then (x, y) ∈ Rs and (y, z) ∈ Rs, but (x, z) ∉ Rs since there does not exist k such that 1 x k = 4.

In short, in this question, we were given five relations and asked to determine if they are reflexive, symmetric, and/or transitive.

(a) The relation Ri on R is reflexive, symmetric, and transitive.

(b) The relation R on A is not reflexive, not symmetric, and transitive.

(c) The relation Rs on Z is not reflexive, not symmetric, and transitive.

(d) The relation R, on Z is not reflexive, not symmetric, and not transitive.

(e) The relation Rs on Z is reflexive, not symmetric, and transitive.

Learn more about reflexive relation on:

https://brainly.com/question/30105703

#SPJ4

The binomial distribution approximates a normal distribution under the following circumstance: a. When npq > 10,

where n is the sample size, p is the probability of success, and q is the probability of failure. When npq > 10, the binomial distribution is approximately normal with a mean of np and a standard deviation of sqrt(npq).

Binomial distribution is a probability distribution that describes the probability of a certain number of successes in a fixed number of independent trials, each with the same probability of success. The trials can be either "success" or "failure" events, and the probability of success is denoted by p. The binomial distribution is described by two parameters: n, the number of trials, and p, the probability of success in each trial.

The probability mass function of the binomial distribution is given by the formula:

P(X = k) = (n choose k) * p^k * (1-p)^(n-k)

where X is the random variable denoting the number of successes, k is the number of successes, n is the number of trials, p is the probability of success in each trial, and (n choose k) is the binomial coefficient, which represents the number of ways to choose k successes from n trials.

Visit here to learn more about binomial distribution brainly.com/question/29137961
#SPJ11

The higher price represents the cost burden of a significant barrier to entry.

What is the cost price?

The cost price in retail systems represents the particular value that corresponds to the unit price paid. In some stock market theories, this value is utilized to establish the value of stock holdings and is used as a key determinant of profitability.

Here, we have

Given: Customers of monopolistically competitive businesses will shell out more money for goods than they would if the identical goods were priced higher and supplied in a fully competitive market.

In contrast to perfectly competitive markets, monopolies have significant entry barriers and a single producer who serves as the price market.

As a result, costs are generally greater because there is only one vendor and numerous consumers.

Hence, the higher price represents the cost burden of a significant barrier to entry.

To learn more about the cost price from the given link

https://brainly.com/question/29509552

#SPJ4

The correct alternative hypothesis is H1: pL> pH.

We test whether the proportion of children in the low-income group who drew the nickel too large is greater than the proportion of children in the high-income group who drew the nickel too large.

Proportion of children in the low-income group (denoted pL) who also drew a nickel. large is greater than the proportion of the high-income group (indicated by pH) that attracted nickel too large, we test at the 0.1 significance level.

a) First, we need to identify the correct alternative hypothesis. The alternative hypothesis in this case should be:

H1: PL > pH

This hypothesis states that the proportion of children in the low-income group who drew oversized nickels would be greater than the proportion of children in the high-incomegroup who drew oversized nickels.

Learn more about hypothesis here,

https://brainly.com/question/15980493

#SPJ4

Answer:

a7=16a7=16 • a61=232a61=232

Step-by-step explanation:

Therefore, you will need 378 pavers to cover your driveway using equation.

To find the total number of pavers needed for the driveway, we use the formula:

Number of pavers = Total area of driveway / Area of one paver

First, we need to find the area of one paver. The pavers are 8 inches by 10 inches, so the area of one paver is:

Area of one paver = length x width = 8 inches x 10 inches = 80 square inches

Next, we can plug in the given area of the driveway, which is 30,240 square inches, and the area of one paver into the formula:

Number of pavers = 30,240 sq in / 80 sq in per paver

Number of pavers = 378

To know more about equation,

https://brainly.com/question/28243079

#SPJ11

Answer:

3/49/12

This is because

3x3=9

4 x 3 = 12

3/4 = 9/12

Answer:  67

Step-by-step explanation:

Write an equation.

Product means multiplied

So 3 numbers multiplied is -804

number1 =4

number2 = -3

number3 = x

(4)(-3)(x) = -804      simplify

-12x= -804             divide both sides by -12

x=67

None of the graphs with the given degree sequence (4,4,4,4,4,4,2) can be bipartite.

To understand why none of the graphs with the given degree sequence (4,4,4,4,4,4,2) are bipartite, let's first define the key terms:

1. Degree: The degree of a vertex in a graph is the number of edges incident to it.
2. Sequence: A degree sequence is a list of the degrees of each vertex in a graph.
3. Bipartite: A graph is bipartite if its vertices can be partitioned into two disjoint sets such that no two vertices within the same set are adjacent.

Now, let's analyze the given degree sequence (4,4,4,4,4,4,2):

1. There are 7 vertices in the graph.
2. The sum of the degrees is 4+4+4+4+4+4+2 = 26, which is even (a necessary condition for a graph to be bipartite).

For a graph to be bipartite, it must satisfy the Handshaking Lemma. The Handshaking Lemma states that the sum of the degrees of all vertices in a set should be equal to the sum of the degrees of all vertices in the other set. In other words, the sum of the degrees of all vertices in one set is equal to the number of edges crossing between the two sets.

Let's assume we can divide the vertices into two disjoint sets, A and B. Since each vertex with degree 4 is adjacent to 4 vertices, it must be connected to vertices in the opposite set. However, we have six vertices with degree 4, so the total sum of degrees of vertices in set A would be 6 * 4 = 24, while the vertex with degree 2 in set B would only account for 2. This contradicts the Handshaking Lemma, as 24 ≠ 2.

Hence, none of the graphs with the given degree sequence (4,4,4,4,4,4,2) can be bipartite.

to learn more about bipartite click here:

brainly.com/question/30889414

#SPJ11

Answer:

25

Step-by-step explanation:

If y varies directly as x^2, we can write:

y = kx^2

where k is the constant of proportionality.

To find k, we can use the given information that y = 400 when x = 16:

400 = k(16)^2

400 = 256k

k = 400/256

k = 1.5625

Now that we know the value of k, we can use the equation y = kx^2 to find y when x = 4:

y = 1.5625(4)^2

y = 25

Therefore, when x = 4, y is 25.

The average value of the function f(x) on the interval [-3, 3] is 1/7128.

An input and an output are connected by a function. It functions similarly to a machine with an input and an output. Additionally, the input and output are somehow connected. The traditional format for writing a function is f(x) "f(x) =... "

The average value of a function f(x) on an interval [a,b] is given by:

f_ave = 1/(b-a) * ∫[a to b] f(x) dx

Using this formula, we can find the average value f_ave of the function f(x) = x²/(x³ + 33)² on the interval [-3, 3] as:

f_ave = 1/(3-(-3)) * ∫[-3 to 3] x²/(x³ + 33)² dx

To evaluate this integral, we can use the substitution u = x³ + 33, which gives us du/dx = 3x² and dx = du/(3x²). Substituting these expressions in the integral, we get:

f_ave = 1/6 * ∫[(0+33) to (3³+33)] 1/u² du

f_ave = 1/6 * [-1/u] from 33 to 36

f_ave = 1/6 * [(1/33) - (1/36)]

f_ave = (1/198) - (1/216)

f_ave = 1/7128

Therefore, the average value of the function f(x) on the interval [-3, 3] is 1/7128.

Learn more about function on:

https://brainly.com/question/10439235

#SPJ4

Let's assume that the sides of the rectangle are labeled as follows: the given side is x cm, and the other side is y cm. The area of the rectangle is given by A = xy.

We are given that the other side, y, is increasing at a rate of 4 cm/min. This means that the derivative of y with respect to time is dy/dt = 4 cm/min.

We are asked to find how fast the area is changing at the instant when y = 7 cm. To do this, we need to find the derivative of the area with respect to time:

dA/dt = d(xy)/dt

Using the product rule of differentiation, we can write:

dA/dt = x(dy/dt) + y(dx/dt)

Since x is constant, dx/dt = 0.

Substituting in the given values, we get:

dA/dt = x(dy/dt) = x(4 cm/min)

When y = 7 cm, we have x = 10 cm (since we were given that one side is cm). Therefore, at this instant:

dA/dt = 10 cm × (4 cm/min) = 40 cm²/min

So the area of the rectangle is increasing at a rate of 40 cm²/min when y = 7 cm, and the other side is increasing at a rate of 4 cm/min.

Learn more about rectangle

https://brainly.com/question/29123947

#SPJ4

a. The probability that the student has a shoe size of 8 is 2/23.

b. The probability that the student has a shoe size of 7 or smaller is 7/23.

To calculate the probabilities, we need to know the total number of students and the number of students with each shoe size.

Since the table is not provided, I'll assume you meant "shoe size" instead of "school size" in your question.

I'll also assume that the shoe sizes are whole numbers.

Let's assume the table contains the following information:

Shoe Size:

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

(a) To work out the probability that the student has a shoe size of 8, we need to determine the number of students with a shoe size of 8 and divide it by the total number of students.

Number of students with shoe size 8: 2 (according to the table)

Total number of students: 23

Probability = Number of students with shoe size 8 / Total number of students

Probability = 2 / 23

Therefore, the probability that the student has a shoe size of 8 is 2/23.

(b) To work out the probability that the student has a shoe size of 7 or smaller, we need to determine the number of students with shoe sizes 1 to 7 and divide it by the total number of students.

Number of students with shoe sizes 1 to 7: 7 (according to the table)

Total number of students: 23

Probability = Number of students with shoe sizes 1 to 7 / Total number of students

Probability = 7 / 23

Therefore, the probability that the student has a shoe size of 7 or smaller is 7/23.

For similar question on probability.

https://brainly.com/question/30535529

#SPJ11

Question : A school has five houses A, B, C, D and E. A class has 23 students, 4 from house A, 8. from house B, 5 from  house C, 2 from house 0 and rest from house E. A single student is selected at random ,to be the class monitor. The probability that the selected student is not from A, Band C is?