Answer:
A water molecule has three atoms: two hydrogen (H) atoms and one oxygen (O) atom. That's why water is sometimes referred to as H2O.
Explanation:
(◕ᴗ◕✿)(◕ᴗ◕✿)(◕ᴗ◕✿)
Gases behave most ideally at ____________ temperatures and ___________ pressures.
Low pressures and high temperatures are the optimal conditions for gas behaviour. The ideal gas law [tex]PV = nRT[/tex] states that ideal gases must conform to this law.
It is only feasible if the gas is made up of several freely moving point particles that do not interact with each other and have a very small total volume. An ideal gas is one in which all collisions between atoms or molecules are completely elastic and in which there are no intermolecular attraction forces. It can be compared to a collection of perfectly hard spheres that collide but do not interact with one another in any other way. The molecules of perfect gases are not attracted to one another or repel one another.
Learn more about Ideal gas here:
https://brainly.com/question/27870704
#SPJ4
A sealed container can hold
6.28 L CO2 at 1.00 atm and 293 K.
How many moles of CO2 fill the
container?
Approximately 0.26 moles of CO2 fill the container.
To determine the number of moles of CO2 that fill the container, we can use the ideal gas law equation:
PV = nRT
Where:
P = pressure of the gas (1.00 atm)
V = volume of the gas (6.28 L)
n = number of moles of gas (unknown)
R = ideal gas constant (0.0821 L·atm/mol·K)
T = temperature of the gas in Kelvin (293 K)
Rearranging the equation, we have:
n = PV / RT
Substituting the given values:
n = (1.00 atm) * (6.28 L) / (0.0821 L·atm/mol·K) * (293 K)
Calculating the expression:
n = 6.28 / 24.0513
n ≈ 0.26 moles
Therefore, approximately 0.26 moles of CO2 fill the container.
It's worth noting that the answer is rounded to two decimal places, as the given values were provided with two decimal places. Additionally, the calculation assumes ideal gas behavior and that there are no other gases or impurities present in the container.
For more such question on moles visit:
https://brainly.com/question/29367909
#SPJ8
PLEASE HURRY!!
Question- Convert the 3.40 x 1022 formula units of table salt, NaCl, to its mass in grams.
Answers:
A. 0.0565 g NaCl
B. 58.4 g NaCl
C. 3.30 g NaCl
D. 6.02 g NaCl
To solve this we must be knowing each and every concept related to mole. Therefore, the correct option is option C among all the given options.
What is mole?A mole is merely a measuring unit. In reality, it is one of International System of Units' seven foundation units (SI). When basically determines are insufficient, new units are created.
Chemical reactions frequently occur at levels that use grams would be inappropriate, but using actual figures of atoms/molecules/ions would also be misleading.
It's much easier to write' mole' than '6.02x10²³' whenever you wish to refer to a huge number of things. That is essentially why and how this particular component was created.
number of mole =given number of atoms ÷ 6.022×10²³(Avogadro number)
number of atoms = 3.40 x 10²² atoms
number of mole=3.40 x 10²² ÷ 6.022×10²³
=0.056moles
mass of NaCl=0.056moles ×58.44
=3.27g
Therefore, the correct option is option C among all the given options.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ1
please help me!!!! 26 pointz
Answer:
Electron = negative; Proton = positive; Neutron = no charge
Explanation:
What are the hottest areas of the Sun?
Rank these acids according to their expected pKa values.ClCH2COOHClCH2CH2COOHCH3CH2COOHCl2CHCOOH
The expected pKa values of the acids listed, in increasing order, are:
Cl2CHCOOH < ClCH2COOH < CH3CH2COOH < ClCH2CH2COOH
The pKa value is a measure of the acidity of a substance and is defined as the negative logarithm of the acid dissociation constant (Ka). A lower pKa value indicates a stronger acid, as it dissociates more readily in water to release hydrogen ions.
The alkyl chain length and the presence of functional groups can influence the pKa value of an acid. In this case, the longer the alkyl chain, the higher the pKa value.
Therefore, The expected pKa values of the acids listed, in increasing order, are:
Cl2CHCOOH < ClCH2COOH < CH3CH2COOH < ClCH2CH2COOH
To know more about pKa refer to:
brainly.com/question/13178964
#SPJ4
which size of micropipette would you select to deliver 215 microliters?
A micropipette of size P1000 (can read upto 1ml) would be required or selected to deliver or transfer 215 microliters of liquid.
A micropipette is an instrument used to transfer small amounts (<= 1 ml) of liquids. The scales on a micropipette are in microliters (1000µl = 1 ml). These are very delicate and expensive instruments costing between $150-300 a piece. These instruments come in three sizes which are capable of pipetting three ranges of volumes:
P20 type can transfer liquids between the range of 5- 20 µl,
P200 type can transfer liquids between the range of 20-200 µl, and
P1000 type can transfer liquids between the range of 200-1000 µl.
These instruments are used in conjunction/simultaneously with disposable and often sterile plastic tips.
A fixed volume micropipette is a pre-set instrument to measure only a specific volume. Although the volume transferred/delivered by a given pipet cannot be changed, this pipet is operated analogously to the variable micropipette. A fixed volume micropipette often does not have a tip ejector button, so the tips are to be removed manually while the required steps of the process.
It is of utmost importance to use the correct pipettor available for the volume that is to be dispensed. As going below or above the range provided for a micropipette, may damage the instrument.
Thus, a micropipette of type P1000 only should be used to deliver any liquid of volume 215 microliters.
Learn more about micropipette here:
https://brainly.com/question/23793716
#SPJ4
As the temperature of a gas at 500 K is changed to 380 K at constant pressure, will the
volume of gas increase, decrease, or remain the same? Explain why in terms of how the
molecules are moving.
The movement of atomic or molecular building blocks in a certain direction is referred to as molecular motion.
What makes the molecules move?The movement of atomic or molecular building blocks in a certain direction is referred to as molecular motion. Temperature and heat both have an impact on molecular mobility. This is so because the measurement of temperature, which reflects molecular motion and average kinetic energy, is used to determine molecular motion.
The atoms and molecules of a substance accelerate as it is heated. It doesn't matter if the substance is a solid, liquid, or gas; this still occurs. We'll attempt it with a liquid and a gas instead because it's harder to see it happen in a solid. See if you can identify the movement of molecules caused by heat.
To learn more about molecules move refer to:
https://brainly.com/question/22690377
#SPJ1
predicting products of chemical reactions worksheet
Predicting the products of chemical reactions involves understanding the reactants and the type of chemical reaction taking place.
What are those reactions?
Understanding the reactants and the type of chemical reaction occurring is necessary to predict the results of chemical reactions. Synthesis, decomposition, single replacement, double replacement, and combustion are examples of common reaction types.One can apply the relevant chemical equation to anticipate the results by looking at the reactants and determining the kind of reaction that is occurring.For instance, two or more reactants unite to create a single product in a synthesis reaction. A single reactant disintegrates into several products in a decomposition process. Predicting the results of a chemical reaction requires practice and knowledge of the chemical characteristics of the components involved as well as the reactivity of the reactants.To learn more about chemical reactions refer to:
https://brainly.com/question/29762834
The manufacturer of
a new convection oven claims that his product
will bake things 25 percent faster than a con-
ventional oven that relies mainly on radiation.
How could you test this claim?
According to studies, convection ovens generally cook 25% faster than traditional ovens at a lower cooking temperature of roughly 25 degrees F, even if cooking times vary slightly between ovens.
Convection ovens, in contrast to conventional radiant (also known as thermal) ovens, include a fan that evenly distributes air inside the chamber, removing hot and cold regions.
A convection oven may cook food up to 25% more quickly than a regular oven.
Food cooks roughly 25% more quickly in a convection oven because hot air is blown directly onto it rather than merely surrounding it.
Convection ovens heat up more quickly and cook food more quickly. Thanks to some straightforward modifications to the appliance, they also cook more evenly.
All of this results in tastier baked goods, meats, and other foods.
Overall, the convection oven option is excellent if you want a crisp, rapid result, but stick with the regular oven if you want your food to retain moisture or rise before it is fully baked.
To learn more about Convection oven from given link
https://brainly.com/question/15700369
#SPJ1
A general formula for a double-displacement reaction is written as:
General formula of double displacement reaction is:
AB + CD = AD + BC where AB and CD are the displaced reactants.
A double displacement reaction occurs when two reactants exchange ions to form two new compounds. Double displacement reactions usually result in the formation of a precipitate as a product.
Precipitate is typically formed as a result of a double displacement reaction.
The two types of bonds that exist between the reactants can be covalent on ionic in nature.
The other name for a double displacement reaction is salt metathesis reaction. It is an exchange reaction, or we can say a double decomposition reaction when one or more of the reactants does not dissolve in the solvent.
The simplest way to identify a double displacement reaction is to see if the cations exchanged anions with each other. If the states of matter are mentioned, look for aqueous reactants and the formation of a single solid product.
Learn more about displacement reactions here:
https://brainly.com/question/29794138
#SPJ4
dilute hydrochloric acid Hinc N K a) Name each of the parts labelled J, K,L,M,N and P b) State the function of each of the parts labelled L and P c) State the method of collection of the gas produced d) Describe how the gas produced could be tested for e) Write a balanced chemical equation for the reaction the gas preparation
Add dilute hydrochloric acid to calcium carbonate, bubbles of carbon dioxide gas appear.
Give an explanation of the process for making carbon dioxide gas from diluted hydrochloric acid.These are the steps in this procedure:
a) The component marked J is a heatproof mat that acts as a stable, heat-resistant basis to stop the test tube from shattering as a result of the heat produced.
A test tube is the item with the label K.
This is utilized to keep the reactants in check. The L-shaped component is a delivery tube.
through which the gas produced is piped into the delivery tube.
The M-designated component is a bung.
It serves to keep the generated gas inside the test tube.
Diluted hydrochloric acid, which is the component with the letter N, serves as the reactant that creates the gas.
A delivery tube is the component with the letter P.
It is employed to gather the gas generated.
b) The L-shaped component's job is to route the created gas into the delivery tube.
The P-shaped component's job is to collect the created gas.
c) Downward delivery is the mechanism used to collect the created gas.
This is accomplished by joining the delivery tube to the test tube and submerging the delivery tube's tip in a water beaker.
This enables the generated gas to pass through the delivery tube and into the water-filled beaker.
d) A burning candle or a glowing splinter can be used to detect the gas created.
To learn more about preparation of carbon dioxide refer :
https://brainly.com/question/1301348
#SPJ1
which product besides radiation do radioactive atoms give off when they decay?
When radioactive atoms decay, they give off alpha particles, beta particles, and gamma rays in addition to radiation.
Alpha particles are made up of two protons and two neutrons, making them similar to a helium nucleus. They have a positive charge and are relatively large and slow-moving. Beta particles are high-energy electrons or positrons, and are much smaller and faster than alpha particles. They have a negative charge. Gamma rays are high-energy electromagnetic radiation, similar to X-rays. They have no mass and no charge and are the most energetic and penetrating of the three types of particles. These particles are emitted during the radioactive decay process, and the type and amount of particles emitted depends on the specific isotope undergoing decay.
To know more about radioactivity
https://brainly.com/question/1770619
#SPJ4
explain the process that creates chemical elements lighter than iron, including evidence
The process that creates chemical elements lighter than iron is known as nuclear fusion and the evidence is the fusion of carbon and helium nuclei which forms an oxygen nucleus, and so on.
What is Nuclear fusion?This is referred to as the type of reaction which is characterized by two or more atomic nuclei being combined to form one or more different atomic nuclei and subatomic particles.
It is also responsible for the creation of chemical elements lighter than iron through successive reactions and a common example is the fusion of carbon and helium nuclei to form an oxygen nucleus thereby making it the correct choice.
Read more about Nuclear fusion here https://brainly.com/question/982293
#SPJ1
a student begins the boiling point determination, for the oil bath they turn on the hot plates heat but forget to turn on the stirrer. what will happen?
The water is gonna heat up from the bottom up when you stir it, it lets the water heat up uniform.
In general, stirring helps in spreading of heat evenly in the mixture. the solid present inside disturb the evenness of heat in water. During the process of heating, an fundamental stream of bubbles or air is expelled and then, a little later, a rapid and continuous stream of bubbles emerges out of the inverted capillary tube. During this stage it stops heating. Very soon the stream of bubbles will slow down and stop.
If you will not stir the mixture the substance substance may get burned due to the high amount of heat supplied. Stirring can also be used when their is a need to mix the substance with a solvent properly.
To learn more about Stirring , here
brainly.com/question/9655111
#SPJ4
Determine where each type of cleaning solution should be discarded after use.Water used to rinse detergent out of a flask _____ sink or waste containerSolvet used to rinse chemicals out of a beaker_____ sink or waste containerAcid solution used to clean a crucible___________ sink or waste container
Water used for washing purposes can be discarded into the sink as it does not affect the water pollution.
But in the case of organic solvent and acid solution they can be discarded into waste containers for proper disposal.
As we know that organic solvent and acid solution are hazardous for aquatic life. Their discopsal is a major concern.
What is water?
Water, a substance composed of the chemical elements hydrogen and oxygen and existing in gaseous, liquid and solid states. It is one of the most abundant and basic compounds. At room temperature, the tasteless and odorless liquid has an important ability to dissolve many other substances.To know more about water, click the link given below:
https://brainly.com/question/17435626
#SPJ4
Why the small community of Mount Laguna, California, just 55 miles from San Diego much colder than San Diego ?
Answer: It all boils down to the two cities' proximity to the Pacific Ocean, along with wind currents and geographical location
Explanation: It is known throughout the whole scientific community that a body of water near a city produces very stable temperatures throughout the year with small dips. When it is summer, instead of San Diego boiling in the heat, the Pacific absorbs most of this heat, making the heat in the city tolerable (almost), this makes the ocean appear cold in the summer.
When it turns to winter, the heat absorbed by the ocean in the summer gets radiated making the cold in San Diego negligible. Applying this same logic to Mount Laguna, which is not near a body of water, it can be understood that it would have more extreme temp. swings.
Along with water, there is wind currents. I don't live in Mount Laguna, but I have to assume from the context you gave me that a cold wind current usually flows there, making it colder than in San Diego, which has a warm current.
The location also matters, if this town is under a valley, canyon, or mountain it could be under a shadow further decreasing the temp. more than San Diego.
Hopefully this helps, and good luck!
A neutron is a subatomic particle found in the nucleus of every atom except that of simple hydrogen. The particle derives its name from the fact that it has no electrical charge; it is neutral. Its relative mass is 1u and absolute mass is 1.6×10−24g.
A neutron is a subatomic particle found in the nucleus of every atom except that of simple hydrogen. The particle derives its name from the fact that it has no electrical charge; it is neutral. Neutrons are extremely dense.
What is meant by neutron ?
Every atom's nucleus has a neutron, with the exception of plain hydrogen, which does not.The fact that the particle has no electrical charge it is neutral gives it its name. Neutrons have a very high density.Compared to positively charged protons, neutrons have a little higher mass and a neutral electric charge. Neutrons that have left a nucleus are considered to be "free" neutrons.A subatomic particle having a positive charge is called a proton.The strong nuclear force holds protons together in the nucleus of an atom. A particular subatomic particle with no charge is the neutron.Given that it is a composite particle consisting of quarks, the neutron is categorized as a hadron.To learn more about neutron refer to
https://brainly.com/question/11927555
#SPJ4
Atoms to grams. How many grams of KNO3 are in
2.98 x 10 22 atoms of KNO3?
Answer:
4.949 g
Explanation:
One mole of any substance has 6.022 x [tex]10^{23}[/tex] atoms or particles.
Setting up ratio between moles and atoms:
Moles : Atoms
1 : 6.022 x [tex]10^{23}[/tex]
X : 2.98 x [tex]10^{22}[/tex]
X = (2.98 x [tex]10^{22}[/tex])/(6.022 x [tex]10^{23}[/tex])
X = 0.049 moles
The molar mass of KNO3 is : 39 + 14 + ( 16 x 3 ) = 101 g/mol
Moles : Mass
1 : 101
0.049 : X
X = 0.049 x 101
X = 4.949 g
PLEASE HURRY I NEED HELP, LIMITED TIME!!!!
Question- Convert 8.65 × 10^25 atoms H to its mass in grams
A. 5.26 x 10^49 g H
B. 1.45 g H
C. 1.01 g H
D. 145 g H
Answer:
Mass = 145g H
Explanation:
-First we need to convert atoms to moles :
1mole =6.022 ×10^23 atoms (The number of particles in 1 mole is called Avogadro's Number (6.0221421 x 1023))
8.65×10^23 atoms of H ×1 mol / 6.022×10^23
=1.45×10^2
=145 mol
- then convert moles to grams :
Mass in grams of H
Mass = number of moles ×molar mass for H
= 145 mol ×1 g/mol
= 145 g
What did I do wrong and how would I do this correctly?
The mass of the hydrogen gas produced is equal to 0.368 g, not 0.322 this is wrong mass .
The reaction between calcium and water yields the following balanced chemical equation: 2 Ca + 2 H₂O → 2 CaOH + H₂
Given :that the mass of calcium is 14.7 g,
the number of moles of calcium is 14.7/40, which equals 0.3675 mol.
The number of moles of water is 11.5/18, which equals 0.638 mol.
Two moles of calcium react with two moles of water.
Calcium is therefore a limiting reagent.
What is the chemical equation?The mass of 0.1838 mol of hydrogen gas is 0.368 g, and 0.3675 mol of Ca produces hydrogen gas. A balanced chemical equation is one in which both sides of the equation have the same number of atoms.
In chemistry, what is a limiting reagent?The reactant that is consumed first in a chemical reaction, also known as the limiting reagent, limits the amount of product that can be produced.
Learn more about chemical equation:
brainly.com/question/23877810
#SPJ1
When a student squeezes a balloon, it changes shape. In which state of matter is the substance inside the balloon?
A. It could be either a liquid or a gas, because these states can change shape.
B. It could only be a liquid, because only liquids can change shape
C. It could only be a gas, because only gases can change shape.
D. It could not be a liquid or a solid, because neither of these states can change shape.
What happens to pressure when.. *read image*
Answer:
Explanation:
the answer is B.
How many atoms are present in 2. 0 moles?.
Answer:
1.2004 x [tex]10^{24}[/tex]
Explanation:
One mole of any substance has 6.022 x [tex]10^{23}[/tex] atoms.
Setting up ratio between moles and atoms:
Moles : Atoms
1 : 6.022 x [tex]10^{23}[/tex]
2 : X
X = 2 x ( 6.022 x [tex]10^{23}[/tex] )
X = 1.2004 x [tex]10^{24}[/tex]
How many mL of butane would you
add to hexane to make 750 mL of a
25.0% by volume butane solution?
In order to create a 750 mL solution that is 25.0% by volume butane, hexane must have 1.8891687657 mL of butane added to it.
How can the quantity of solute required to create a solution be calculated?Given that water has a density of 1 g/ml, the following equation can be used to determine how much solute need be added to create a solution with a weight percentage, grams of solute are calculated as follows (wt% solution) x (ml of water) (100 - wt% solution)
% of Volume, When a solute's volume and a solution's volume are both known, the concentration of the solution is expressed as a volume percent: Volume%=Volume of Solute The solution's volume is 100% Se.
Grams of solute are calculated as follows (wt% solution) x (ml of water) (100 - wt% solution).
Explanation:
(25% * 750)/(100 - 25%)
(0.25 * 750) / (100 - 0.25)
187.5 / 99.25 = 1.8891687657.
To learn more about Volume of a solution refer to:
https://brainly.com/question/19379932
#SPJ1
Answer: 190
Explanation: 190/750 = 0.25333333333
Why i carbon an element and not a compound?
All carbon atom have the ame number of proton. Carbon bond eaily with oxygen, but not helium. Carbon i found in all living organim. All carbon atom have the ame number of electron
Carbon is an element and not a compound because a) all carbon atom have the same number of protons.
Carbon is an element and not a compound because all of its atoms have the same number of protons.
This unique characteristic sets it apart from compounds, which are made up of two or more different types of atoms.
Carbon's atomic structure is composed of a nucleus surrounded by electrons and protons.
The nucleus is made up of protons and neutrons, and the protons determine the element's identity. Because all carbon atoms have six protons, they are all the same element.
To learn more about carbon, click here:
https://brainly.com/question/22530423
#SPJ4
which of these minerals would be the main component in the cement slab in your house?
The main component in a cement slab in a house is typically Portland cement.
Key points:
Portland cement is a type of hydraulic cement that is commonly used in the construction of buildings, bridges, roads, and other structures.It is made by heating a mixture of limestone and clay to high temperatures, a process known as calcination.The resulting material is ground into a fine powder, which can be mixed with water, sand, and gravel to form concrete.The concrete is then poured and leveled to form the slab.The cement reacts with water to form a paste that binds the other materials together, creating a strong and durable building material.Portland cement is also used in other types of construction, such as in the production of mortar and stucco.Other types of cement such as blended cement can be used too, depending on the requirement and the availability of the raw materials.Learn more about cement slabs here:
https://brainly.com/question/5842807
#SPJ4
A sealable bag holds 3.79 L of
gas. How many moles of H2
gas are needed to fill the bag
at 1.0 atm and 293 K?
A sealable bag holds 3.79 L of gas. To fill the bag, 0.157 moles of H2 gas are required.
Calculating the moles:The ideal gas equation is what we use to solve this problem. Additionally known as the general gas equation. This equation is used to describe a possible ideal gas. It has a few restrictions. In 1834, Benoit Paul Emile Clapeyron made the first mention of it. An empirical form is used to write the ideal gas law:
PV = n R T
where-
P = Pressure
V = volume
T = Temperature
n = The amount of substance
R = Ideal gas constant
Now we have the values of these terms as-
P = 1 atm , V = 3.79L , T = 293 K
and R = 0.0826 L/atm
For getting moles of hydrogen we can use the values of variables in ideal gas equation as -
P V = n R T
Now (1 atm) × ( 3.79L ) = n × ( 0.0826 L/atm) × ( 293K)
n = (1 × 3.79) ÷ (0.0826 x 293)
= 0.157 moles
So that the 0.157moles of H₂ gas are needed for fill the bag .
Why is it referred to as ideal gas?A hypothetical gas made up of molecules that adhere to a few rules is referred to as the ideal gas. The molecules of ideal gas do not attract or repel one another. An elastic collision with the container's walls or an elastic collision with the ideal gas molecules would be the only interaction between them.
Learn more about ideal gas law:
brainly.com/question/25290815
#SPJ1
What is the limiting reagent when 16 grams of ch4 is reacted with 64 grams of o2? what remains after the reaction?.
From the given reaction, Oxygen serves as the limiting reagent. Methane remains after the reaction.
What is a limiting reagent?A reactant that is completely consumed at the end of a chemical reaction is known as the limiting reagent. Since the reaction cannot proceed without this reagent, the amount of product that can be produced is constrained.
Because its quantity restricts the number of products that can be generated, the reagent that is totally consumed or reacted is known as the limiting reagent.
CO₂ + 2H₂O ⇒ CH₄+ 2O₂
One mole of methane will totally react with two moles of oxygen to produce one mole of CO₂ and two moles of water, according to the stoichiometric equation given above.
64g of oxygen and 16g of methane will totally react in such case.
When methane is burned, the weight ratio of the reactions between CH₄ and O₂ is (16:64)=1:4.
Only 32 g of oxygen are provided in the question, though. Since we only have 32 when 64 is divided, oxygen will be the limiting reagent in this scenario.
Oxygen serves as the limiting reagent.
Methane is the extra reagent.
To learn more about limiting reagent from given link
https://brainly.com/question/23661051
#SPJ4
A 298-N force acts on a 200-g object. The acceleration of the object is?
