- 2.186 x 10⁻⁵ C must the charge (sign and magnitude) of a 1.45 gg particle be for it to remain stationary when placed in a downward-directed electric field of magnitude 530 n/cn/c.
Electric field:
E = F/q
E ⇒ The magnitude of electric field
F ⇒ Electric force on a test charge q
q ⇒ Magnitude of the point charge
The electric field E at a position P where a charged particle with charge q is subjected to an electric force F is specified by the aforementioned equation.
There are two possible test charges: positive and negative. The directions of E and F are the same if it is positive; if it is negative, they are the opposite.
F = mg = Eq
q = mg/E
= ((1.45 x 10⁻³ kg)(9.8 m/s²))/650 N/C
= 2.186 x 10⁻⁵ C
Since the force must go upward and the electric field is in the opposite direction, q must be negative.
q= -2.186 x 10⁻⁵C
Learn more about electric field here:
https://brainly.com/question/26199225
#SPJ4
In step 9 of the procedure, if you were asked to determine the mass of solution in a test tube, how would you measure this mass?
In order to calculate the mass of the solution, we use the formula
V = πr2h
What does a test tube weigh?After heating, the test tube and anhydrous hydrate weigh 17.05 g. The test tube weighs 15.81 g when it is empty. 1.24 g is the mass of anhydrous hydrate. 0.48 g of water is lost.
How would you calculate a test tube’s volume?Don’t factor in the glass’s thickness when reading. Using the following formula, determine the capacity of each test tube: V = r2h, where r (the radius) = ½ the diameter and = 3.14.
Your final computation should be rounded to the correct number of significant figures.
To know more about mass of Test-tube visit:
https://brainly.com/question/15435006
#SPJ4
The rigid beam is supported by a pin at c and an a992 steel guy wire ab of length 6 ft. If the wire has a diameter of 0. 2 in. , determine the distributed load w if the end b is displaced 0. 12 in. Downward. The wire remains elastic.
The length by which the guy wire stretches is; δ = 0.091 in
We are given;
Length of guy wire AB = 6ft = 72 in
Diameter of wire = 0.2 in
UDL = 200 lb/ft
From the free body diagram of the rigid beam system and the guy wire attached, we can say that;
Taking moments about point C gives;
∑Mc = 0; -(2000 * 5) + (F_BA * cos 30 * 10) = 0
-10000 + 8.66F_BA = 0
8.66F_BA = 10000
F_BA = 10000/8.66
F_BA = 1154.73 lb
Now, the length which it stretches is gotten from the formula;
δ = PL/AE
Where;
δ is change in length
P is Force
L is length of wire
A is area
E is modulus of elasticity of wire(steel) = 29000 ksi = 29000000 psi
A = πd²/4
A = π * 0.2²/4
A = 0.0314 in²
Thus;
δ = (1154.73 * 72)/(0.0314 * 29000000)
δ = 0.091 in
Learn more about length:
https://brainly.com/question/28108430
#SPJ4
The most immediate, but necessarily limited, source of energy for reformation of atp in muscle cells is:________
The most immediate, but necessarily limited, source of energy for reformation of ATP in muscle cells is creatine phosphate. When ATP is used for energy by the cells, it is broken down into ADP and inorganic phosphate. This process is reversible, but it requires energy to reform ATP from ADP and inorganic phosphate. The primary source of this energy is creatine phosphate, which donates a phosphate group to ADP to form ATP.
This process is called phosphocreatine resynthesis and it occurs in the mitochondria of muscle cells. Phosphocreatine is synthesized from creatine and ATP in a reaction that requires the enzyme creatine kinase. This reaction is irreversible, meaning that the synthesis of phosphocreatine from creatine and ATP cannot be used to generate ATP.
The amount of ATP that can be generated from phosphocreatine resynthesis is limited by the amount of creatine phosphate available in the muscle cells. Creatine phosphate is synthesized in the liver from creatine and ATP. It is then transported to the muscle cells where it is used for phosphocreatine resynthesis. The synthesis of creatine phosphate in the liver is a slow process and the amount of creatine phosphate in the muscle cells is limited.
The most immediate source of energy for reformation of ATP in muscle cells is therefore creatine phosphate. This source of energy is limited, however, and other sources of energy must be used to maintain ATP levels in the cells.
Learn more on creatine phosphate here:
https://brainly.com/question/15853056
#SPJ4
Calculate the change in the enthalpy of argon, in kj/kg, when it is cooled from 100 to 25oc. if neon had undergone this same change of temperature, would its enthalpy change have been any different?
The change in the enthalpy of argon Almost doubles
Explanation:
Argon
Cp = Specific heat at constant volume = 0.520 kJ/kgK
T₁ = Initial temperature = 75°C
T₂ = Final temperature = 35°C
Enthalpy,
Δh = CpΔT
⇒Δh = Cp(T₂-T₁)
⇒Δh = 0.520×(35-75)
⇒Δh = -20.8 kJ/kg
Neon
Cp = Specific heat at constant volume = 1.03 kJ/kgK
T₁ = Initial temperature = 75°C
T₂ = Final temperature = 35°C
Δh = Cp(T₂-T₁)
⇒Δh = 1.03×(35-75)
⇒Δh = -41.2 kJ/kg
Enthalpy will change because the Cp value is different.
Enthalpy almost doubles.
To learn more about Enthalpy, refer
to https://brainly.com/question/25545050
#SPJ4
A car moving from rest come in motion after 30 sec and again goes in rest for 0.2 second after some time the acceleration of the car goes to 5m/s^2 find the speed of the car
The final velocity of the car starting from rest with an acceleration of 5 u for 30 seconds is 150 m/s.
What are Newton's law of motion?Newton gave three laws of motion which can be utilized to find the velocity, acceleration and displacement of a body. These law are only applicable for constant acceleration.
What is acceleration?Acceleration is the physical quantity which represents change in velocity per unit time.
In simpler words it can be said as the increment or decrement in the velocity per second.
Given:
Total time taken 30 seconds
Acceleration of the car = 5 u
Initial velocity of the car = 0m/s
Here we have to find the velocity of the car after 30 seconds.
We already know all the basic values that are used for finding the value of final velocity.
Using Newton's first law of motion we have:
v = u + a × t
Where,
v is the final velocity of the car
u is the initial velocity of the car
a is the acceleration of the car
t is the total time taken to complete the displacement.
Substituting given values in Newton's first law of motion we get
Final velocity = 0 + 5 × 30
Final velocity = 0 + 150
Final velocity = 150 m/s
Therefore, the final velocity of the car starting from rest with an acceleration of 5 u for 30 seconds is 150 m/s
Learn more about Newton's law of motion here:
https://brainly.com/question/974124
#SPJ9
A ball is thrown directly downward with an initial speed of 7.05 m/s, from a height of 29.9 m. after what time interval does it strike the ground? s
The ball that is thrown directly downward with an initial speed of 7.05 m/s, from a height of 29.9 m. takes 3.29 s to strike the ground
The formula for the downward vertical launch and the procedure we will use is:
t = {V₀ + [tex]\sqrt{}[/tex][(V₀)² + 2*g*y]}/ g
Where:
v₀ = initial velocityg = gravityy = heightt = timeInformation about the problem:
g = 9.8 m/s²v₀ = 7.05 m/sy = 29.9 mt= ?With the information gave, we can calculate the time from the ball is thrown, using the formula of downward vertical launch:
t = {V₀ + [tex]\sqrt{}[/tex][(V₀)² + 2*g*y]}/ g
t = {7.05 m/s + [tex]\sqrt{}[/tex][(7.05 m/s)² + 2*9.8 m/s²*29.9 m]}/ 9.8 m/s²
t = {7.05 m/s + [tex]\sqrt{}[/tex][49.70 m²/s² + 586.04m²/s² ]}/ 9.8 m/s²
t = {7.05 m/s + [tex]\sqrt{}[/tex][635.74 m²/s² ]}/ 9.8 m/s²
t = {7.05 m/s + 25.214 m/s}/ 9.8 m/s²
t = 32.26 m/s/ 9.8 m/s²
t = 3.29 s
What is vertical launch?In physics vertical launch is the motion described by an object that has been launched vertically in which the acceleration is the earth's gravitational force.
Learn more about vertical launch at: brainly.com/question/13962796
#SPJ4
What is a Ice pack on a injury?
Conduction Convection Radiation
Conduction is the process by which ice packs transfer heat when put on an injury.
Both gel packs and ice packs mostly absorb heat by conduction, or by coming into close touch with the treatment region.
By producing vasoconstriction, which lowers blood flow to the damaged spot, ice minimizes edema, bleeding, and inflammation. By inhibiting pain receptors and nerve transmission, ice immediately reduces pain and muscular spasm.
Direct contact between the items is how heat is transferred during conduction. Convection is the process through which heat is moved within the fluid. Heat transmission in radiation happens by electromagnetic waves without the need of particles. The temperature differential causes the heat transfer to occur.
Learn more about conduction here:
https://brainly.com/question/10219972
#SPJ9
In ernest rutherford's gold foil experiment, why did alpha particles sometimes (1 in 8,000) fly violently in a random direction?
In ernest rutherford's gold foil experiment, why did alpha particles sometimes (1 in 8,000) fly violently in the positive alpha particle were perfectly aligned to strike a nucleus.
In Rutherfords' experiment, the positively charged alpha particles were perfectly aligned to strike the nucleus. Thus they got deflected in a random direction due to repulsions between the positively charged nucleus and positively charged alpha particles.
Ernest Rutherford conducted this experiment in response to J.J. Thomson's plum-pudding model experiment.
A thin piece of gold foil, an alpha particle-emitting radioactive source, and a fluorescent screen that encircles the gold sheet were used in this experiment. He set the radioactive source in front of the gold sheet, which had a fluorescent screen surrounding it. Now, the alpha particle from that radioactive source bombarded this gold foil sheet.
To learn more about Rutherfords' experiment refer the link:
https://brainly.com/question/2386617
#SPJ4
The path of motion of a thrown javelin is an example of
The path of motion observed during the javelin throw is an example of curvilinear motion.
What is curvilinear motion?When an object is thrown at a particular angle, the motion of an object is curved i.e, called curvilinear motion.
Example: A stone thrown into the air at a particular angle.
The javelin throw is a sport with a track and field event where a spear of 2.5m in length is thrown into the air at a particular angle. Thus considered an example of curvilinear motion
To know more about curvilinear motion visit:
https://brainly.com/question/14907275
#SPJ9
If you drop an object in the absence of air resistance, it accelerates downward at 9.8 m/s^2. if instead you throw it downward, its downward acceleration after release is :________
The downward acceleration after release is 9.8 m/s^2.
What is the universal law of gravitation, or NLG?
Every particle of matter in the universe is drawn to every other particle by a force that varies directly with their combined masses and inversely with their distance from one another.
Whether an object is moving or at rest, gravity still exerts its force on it.
In the given case, the general equation is as follows:
s = s₀+v₀t+1/2g[tex]t^{2}[/tex]
where
s is referred to as position at time t,
s₀ is referred to as the initial position,
v₀ is referred to as the initial velocity,
g is referred to as the acceleration of gravity and
t is referred to as the elapsed time.
When the object leaves your hand, we would typically say that time is (t)=0.
An object initial velocity is increased when it is thrown, whereas it would be zero if it were simply dropped.
However, once it is out of your hand, gravity accelerates at the same rate in both directions. As a result, the downward acceleration is 9.8 meters per second squared.
To know more about the law of gravity, visit the given link:
https://brainly.com/question/14851665
#SPJ4
If the atomic mass of neon is 20 amu, how much neon would be needed to have an avogadro's number of neon atoms?
By Avogadro's number, the mass of Neon atom is 20 grams.
We need to know about Avogadro's number to solve this problem. Avogadro's number is the number that explains how many carbon atoms are in one mol. The Avogadro's number is
Na = 6,02 × 10²³ atoms / mol
From the question above, we know that
Mr = 20
N = 6,02 × 10²³ atoms
By using Avogadro's number, we can calculate how much Neon atoms
N = n . Na
6,02 × 10²³ = gr / Mr . 6,02 × 10²³
gr / 20 = 1
gr = 20 grams
Hence, the mass of Neon atom is 20 grams.
For more on Avogadro's number at: https://brainly.com/question/1581342
#SPJ4
F = (-5.2,2.3), where all components are in newtons. if a vector's direction is measured counterclockwise from the positive x-axis, what angle (in degrees from 0-360) does f make?
F = (-5.2,2.3), where all components are in newtons. if a vector's direction is measured counterclockwise from the positive x-axis the angle (in degrees from 0-360) does f make 90.41.
A vector specifies the magnitude and direction of the quantity it is related to. Acceleration is the result of a velocity vector that changes over time. A body can be rotated by two or more forces, but the results of the rotation will vary.
A unit vector is defined as a vector with a specific direction and a magnitude of one unit.
F cosθ= -5.2,
F sinθ= 2.3
Please be aware that because the x component is negative, vector F lies in the second quadrant (plot points of F in graph to check)
thus, tanθ = 2.3/5.2
[tex]\theta= tan^{-1} (2.3/5.2)[/tex]
θ=0.41
Angle with positive y=axis=90-0.41
=89.59
and angle with positive x-axis=90+(90-theta)
=90+(90-89.59)
=90.41
To learn more about vector's direction refer the link:
https://brainly.com/question/9580468
#SPJ4
A mass-spring system oscillates with an amplitude of 5.30 cm. if the spring constant is 246 n/m and the mass is 583 g, determine the mechanical energy of the system.
The energy that an object possesses as a result of its motion or position is known as mechanical energy.
What is mechanical energy?Mechanical energy is the energy that an object holds as a result of its motion or position. Potential energy and kinetic energy are two different kinds of mechanical energy (stored energy of position). In the physical sciences, mechanical energy is the sum of kinetic and potential energy. Mechanical energy is constant in an isolated system when only conservative forces are at work on it, according to the mechanical energy conservation principle.
A mass-spring system is, to put it simply, a spring system with a block suspended from or affixed to the spring's free end. Typically, the period of any harmonically moving object may be calculated using the spring-mass system.
The mechanical energy is equal to the potential energy of the spring at the maximum displacement (since v=0 at this point).
[tex]E = (1/2)kA^{2} = (1/2)(246N/m)(5.30 m)^{2}[/tex]
=3455.04j
To learn more about mechanical energy refer to:
https://brainly.com/question/24443465
#SPJ4
A car accelerates from 5m/s to 20m/s in 2.5 seconds
Acceleration of the car is 6 m / s ².
a = ( v - u ) / t
a stands for acceleration
u stands for initial velocity
v stands for final velocity
Given ,
u = 5 m / s
v = 20 m / s
t = 2.5 s
a = ( v - u ) / t
a = ( 20 - 5 ) / 2.5
= 15 / 2.5
a = 6 m / s ²
Hence , Acceleration of car is 6 m / s ² .
To learn more about acceleration , kindly check :
https://brainly.com/question/605631
#SPJ9
The given question is incomplete kindly refer below for complete question :
A car accelerates from 5m/s to 20m/s in 2.5 seconds . Find the acceleration of the car .
Angular momentum is the rotational analog of linear momentum, found by taking the product of moment of inertia and ___________________.
Angular momentum is the rotational analog of linear momentum, found by taking the product of moment of inertia and The reciprocal of linear acceleration is angular velocity.
The right-hand rule, which uses the thumb to indicate the direction of angular velocity momentum and four fingers to represent the direction of motion, can be used to determine the direction of angular momentum.
Angular momentum is a characteristic that describes an object's rotatory inertia while it is moving about an axis that may or may not pass through it.
Torque is needed in rotational motion to cause an item to accelerate angularly. The distribution of the object's mass affects how much torque is needed to produce an angular acceleration. The value that describes the distribution is called the moment of inertia.
To learn more about Angular momentum refer the link:
https://brainly.com/question/15104254
#SPJ4
two forces 3N and 4N act on a body in a direction due north and due East respectively calculate their equivalent
Two forces 3N and 4N act on a body in a direction due north From East, the equilibrant's angle is given by [tex]\theta=\tan ^{-1} \frac{3}{4}=36.8^{\circ}[/tex].
What are equilibrium and resultant force?The equilibrium force is the balanced force when the net force acting is zero and is the exact opposite of the consequent force. The resultant force is one single force replaced by numerous forces.
Briefing:3N and 4N are the two forces pulling on a body.
The forces work along the North and the East, which are perpendicular to one another.
The resultant of the forces, which is provided by the equilibrant force,
R = √(3)²+(4)²
R = 5N
From East, the equilibrant's angle is given by
[tex]\theta=\tan ^{-1} \frac{3}{4}=36.8^{\circ}[/tex]
To know more about equilibrium force visit:
https://brainly.com/question/12582625
#SPJ9
A systems administrator needs to install a new wireless network for authenticated guest access. the wireless network should support 802.1x using the most secure encryption and protocol available
For enrolling authentication servers with server certificates for use with 802.1X authentication, you have two options: construct your own public key infrastructure using Active Directory Certificate Services (AD CS) or utilize server certificates enrolled by a public certification authority (CA).
The Active Directory Certificate Services (AD CS) server is a Windows server that is used to issue digital certificates. Certificates have been shown to be more secure and user-friendly than passwords. Microsoft recognized this and deployed AD CS to assist Microsoft environments in reaping the benefits of certificates. A client computer, on the other hand, trusts a CA when the CA certificate is loaded in the Trusted Root Certification Authorities certificate store. Multiple public CA certificates are installed by default in the Trusted Root Certification Authorities certificate store on Windows systems.
To learn more about 802.1x authentication of wireless network. Click, https://brainly.com/question/15048474
#SPJ4
What is the reactance of an inductor with an inductance of 3.10 h at a frequency of 81.0 hz ?
The inductive reactance is 1578.34 Ω.
We need to know about inductive reactance to solve this problem. The inductive reactance is the internal resistance in the inductor caused by changing current. It can be described as
XL = ω . L
where XL is inductive reactance, ω is angular speed and L is inductance.
The angular speed can be determined by
ω = 2π . f
where f is frequency.
From the question above, we know that
f = 81 Hz
L = 3.1
By substituting the given parameters, we get
XL = ω . L
XL = 2π . f . L
XL = 2π . 81 . 3.1
XL = 1578.34 Ω
For more about inductive reactance at: https://brainly.com/question/4425414
#SPJ4
At what temperature (degrees fahrenheit) is the fahrenheit scale reading equal to (a) 3 times that of the celsius and (b) 1/ 3 times that of the celsius?
3 times that of the celsius = 80°F
1/ 3 times that of the celsius = -160°F/29 F
How is the Fahrenheit scale reading calculated?Fahrenheit scale = 9/5 (°Celcius) +32
a) 3 times that of the celsius
F = 3C
C= F/3
Fahrenheit scale = 9/5 (°Celcius) +32
= 3F/5 + 32
F - 3F/ 5 = 32
2F/5 = 32
2F = 160
F = 80° F
b) 1/ 3 times that of the celsius
F = 1/3 C
3F = C
F = 9/5( 3F) + 32
F = 27F/5 +32
5F-27F = 160
-22F = 160
F = -160°F/ 29
To learn more Fahrenheit, refer
https://brainly.in/question/18581549
#SPJ4
10.0 points
A reconnaissance plane flies 446 km away from
its base at 684 m/s, then flies back to its base
at 1026 m/s.
What is its average speed?
Answer in units of m/s.
007
The average speed in m/s, given the data is 820.80 m/s
What is speed?Speed is the distance travelled per unit. Mathematically, it can be expressed as:
Speed = distance / time
What is average speed?This is the total distance travelled divided by the total time taken to cover the distance.
Average speed = total distance / total time
How to determine the time taken to fly away from the baseDistance = 446 km = 446 × 1000 = 446000 mSpeed = 684 m/sTime to fly away =?Speed = distance / time
684 = 446000 / time
Cross multiply
684 × time = 446000
Divide both side by 684
Time = 446000 / 684
Time to fly away = 652.05 s
How to determine the time taken to return the baseDistance = 446 km = 446 × 1000 = 446000 mSpeed = 1026 m/sTime to return =?Speed = distance / time
1026 = 446000 / time
Cross multiply
1026 × time = 446000
Divide both side by 1026
Time = 446000 / 1026
Time to return = 434.70 s
How to determine the average speedTotal distance = 446000 + 446000 = 892000 mTime to fly away = 652.05 sTime to return = 434.70 sTotal time = 652.05 + 434.70 = 1086.75 sAverage speed =?The average speed can be obtained as follow:
Average speed = total distance / total time
Average speed = 892000 / 1086.75
Average speed = 820.80 m/s
Thus, the average speed is 820.80 m/s
Learn more about speed:
https://brainly.com/question/680492
#SPJ1
What is the potential difference across each capacitor,if they are connected to a 12 v batter?
It is discovered that the capacitor’s potential difference increases to 4.0 V in one second.
Does a capacitor have a different potential across it?There is a potential difference (p.d.) between the plates of a capacitor when it is completely charged, and the larger the area of the plates and/or the smaller the distance between them (known as separation), the greater the charge that the capacitor can carry and the greater the capacitance.
How are differences in potential calculated?Divide the resistance present in the circuit by the current flow rate.
The resulting number, expressed in volts, is the potential difference. Ohm's Law, or V = IR, is the name of this equation.
What is the difference in potential between parallel capacitors?With several parallel capacitors, the potential difference is the same, but the charge increases. Similar to adding resistance in series, paralleling capacitors increases effective capacitance.
Effective capacitance is calculated as effective capacitance = capacitance 1 + capacitance 2.
To know more about capacitance visit:
https://brainly.com/question/12644355
#SPJ4
What is the weight, in n, of an object with a mass of 200 kg at a location where g = 9.6 m/s^2?
The gravitational force applied on the object or weight of the object is equal to 1920 N.
What is weight?
The force exerted on an object by gravity is known as the weight of the object in science and engineering. The gravitational force acting on the any object is referred to as weight in several common textbooks. Some people refer to weight as a scalar quantity that measures the gravitational force's strength. Others define it as the strength of the force that mechanisms that counteract the effects of gravity impose on a body.
In order to calculate the object's weight we just needed to multiply its mass with the given gravitational acceleration. Then after inserting the values for m and g we can obtain the solution.
So, we get equation
[tex]F = m \times g[/tex]
Putting values in the equation,
[tex]F = 200 \times 9.6[/tex]
We get the force,
[tex]F = 1920 N[/tex]
Therefore, the weight of the object is 1920 N.
To know more about weight, go to URL
https://brainly.com/question/229459
#SPJ4
Tech a says that friction bearings are made up of balls and rollers. tech b says that non friction bearings are in sliding contact between moving surfaces. who is correct?
Here in this question neither of them are correct. As the friction bearings are not made of balls and rollers. Also, non friction bearings are not in a sliding contact between moving surfaces.
In order to provide a low-friction support surface for rotating or sliding surfaces, friction bearings are composed of a stationary, non-moving bearing surface, such as machined metal or a pressed-in bushing.
Lubricating oil is frequently used in friction bearings to isolate the moving part from the mated non-moving bearing surface. An antifriction bearing uses rolling parts connected by inner and outer rings to absorb the radial forces acting on the rotor.
It is typically mounted to the shaft with an interference fit. Pumps and aero-derived gas turbines frequently use antifriction-type bearings.
To know more about bearings go to https://brainly.com/question/27789720
#SPJ4
Can an object experience uniform acceleration and uniform velocity at the same time?
Answer:
Explanation:
No, If An object is moving in a uniform velocity that means there is no change in velocity(speed) ,The object keeps on moving with the same speed .No change in speed means that thee is no acceleration encountered by the object. Even the Equations of motions support the statement.
How might the emergence of millions of cicadas at once benefit the cicadas?
The emergence of millions of cicadas benefits.
Cicadas are a source of food. Cicadas are consumed by a large number of people worldwide, not just "on a dare," but also as a delicacy or staple meal. For instance, cicadas have been on Bizarre Foods with Andrew Zimmern more than once. Native Americans consumed cicadas as well, and in at least one instance, doing so helped a group survive difficult times. Insectivore gourmets should, however, rely on readily cultivatable insects like crickets, waxworms, and mealworms as cicadas are typically not a sustainable food supply.Cicadas serve as a source of inspiration for musicians and artists. Numerous songs have been influenced by cicadas, and there are albums and bands named after them.To know more about Cicadas visit : https://brainly.com/question/14927697
#SPJ1
please help i need it fast
This is for ESS(Earth Space Science)
The combination of low oxygen levels in the ocean and low carbon dioxide in the atmosphere led to cooling temperatures and the Late Devonian extinction, 380 million years ago. Many ocean dwellers went extinct, including ⎽⎽⎽(blank)⎽⎽⎽⎽⎽. In contrast, ⎽⎽⎽⎽(blank)⎽⎽⎽⎽ fared best since they were transitioning from sea to land and could survive in both regions.
1. trilobites; tetrapods
2. tetrapods; armored fish
3. trilobites; armored fish
4. tetrapods; trilobites
The combination of low oxygen levels in the ocean and low carbon dioxide in the atmosphere led to cooling temperatures and the Late Devonian extinction, 380 million years ago. Many ocean dwellers went extinct, including trilobites. In contrast, tetrapods fared best since they were transitioning from sea to land and could survive in both regions.
The tetrapods are characteristized by the possession of muscles and skeleton which aids support and movement respectively.
What are tetrapods?The tetrapods are referred to as vertebrates ( those animals with backbones) which have two pairs of limbs. That is, they have four different limbs
So therefore, The combination of low oxygen levels in the ocean and low carbon dioxide in the atmosphere led to cooling temperatures and the Late Devonian extinction, 380 million years ago. Many ocean dwellers went extinct, including trilobites. In contrast, tetrapods fared best since they were transitioning from sea to land and could survive in both regions.
Learn more about tetrapods:
https://brainly.com/question/15744567
#SPJ1
pls could someone help me?
From your observations in electrostatics i, what evidence is there for the existence of at least two varieties of charge? have you seen anything that shows that a third type of charge exists?
No there is nothing that shows third type of charge existence.
Why do we know there are two different kinds of charges?A few straightforward experiments can demonstrate the existence of two different types of charges. As it loses electrons to the silk cloth when the glass rod is rubbed against it, the glass rod becomes positively charged. The silk material acquires a negative charge.
Why are there two different types of fees?The physical characteristic of matter is its electric charge. It comes in both positive and negative forms. While opposite charges repel one another, like charges attract.
To know more about charges, visit:
https://brainly.com/question/19886264
#SPJ4
5. Which descriptive term illustrates an inference?
(1) transparent
(2) younger
(3)bitter
(4)smooth
Pls helps pls help pls help pls help pls help
Answer:
That would be:
(2) younger
