what network is carrying the us open golf tournament

Answers

Answer 1
CBS Sports
Peacock & Golf Channel will also be broadcasting

Related Questions

Consider a computer system with the following configurations of Cache and main memory. The main memory has a total of 16 Mbytes (1 MByte = 2¹⁰ KBytes; 1 KByte = 2¹0 Bytes), where the basic addressable unit is 1 Byte. Assume that 1 word equals 1 Byte. The main memory has a block size of 32 Bytes. The Cache has a size of 128 KBytes. Q5.1 (3 pts) Assume direct mapping. Explain how the the address is divided into three fields: tag, line, word. That is, how many bits does each field contain, respectively? Q5.2 (2 pts) Assume associative mapping. Explain how the address is divided. Q5.3 (2 pts) Given an address 0001 1101 0011 1010 1011 1100, which line in cache is allocated to the block containing this Byte under direct mapping and associative mapping, respectively? Q 5.4 (3 pts) What's the main difference in terms of replacement policy between direct mapping and associative mapping?

Answers

The address in direct mapping is divided into three fields: the tag, line, and word.

The tag field contains the high-order bits, the line field contains the middle-order bits, and the word field contains the low-order bits.  

The number of bits that each field contains is calculated using the formulas.

To compute the number of bits required for each field, we need to first find the number of bits needed to represent each field.

For Associative Mapping:

In associative mapping, the tag field of the address is compared to the tag fields of all lines in the cache.

If a match is found, then the corresponding line is used to access the block.

Since there is no explicit line number in the address, we cannot determine which line in the cache is allocated to the block containing this Byte. Instead, we have to search all lines in the cache to find a match for the tag.

If we find a match, then the corresponding line is used to access the block If another block with the same line number is loaded into the cache, the existing block is replaced.

In associative mapping, each block of main memory can be mapped to any line in the cache.

To know more about tag visit :

brainly.com/question/17204194

#SPJ4

Provide explanations on any FIVE (5) functions of the DBMS.
(Database Management System)

Answers

A database management system (DBMS) is a software tool that is used to manage the database. It helps the user to store, manage and retrieve data from the database. There are various functions of the DBMS.

The five functions of the DBMS are as follows:1. Data definition: This function of DBMS helps in defining the data and its relationships. The user can define the data types, the structure of the database and other parameters related to data. 2. Data storage: The DBMS stores the data in a systematic way so that it is easy to retrieve the data.

It stores the data in tables, which can be accessed by the users whenever they want. 3. Data retrieval: This function of DBMS helps in retrieving the data from the database. It provides the user with an easy way to access the data. 4. Data manipulation: The DBMS provides the user with various functions to manipulate the data. It provides the user with the ability to add, delete and modify the data. 5. Security: The DBMS provides the user with a secure way to store and access the data. It provides various security features like encryption, access control, and auditing.

To know more about software visit:

https://brainly.com/question/32393976

#SPJ11

PLEASE HELP, THIS IS FROM FLVS AND THE SUBJECT IS SOCAL MEADA. YES THAT IS A CORSE.
Josh frequently posts in an online forum to talk about his favorite video game with other players. For the past few weeks, a poster he doesn't know has been harassing Josh in the forums, calling him names and publicly posting hateful messages toward Josh with the intent of starting an argument.

In this situation Josh should consider changing his forum screen name to avoid this cyberbully.

1. True
2. False

Answers

The answer is true (please mark me brainleiest)

Briefly explain any two Python packages for data science.
Explain the different steps involved in Data Science modelling.
List any five application areas of Data Science.

Answers

Two Python packages for data science are: NumPy: NumPy is a library for scientific computing in Python. It provides an efficient way of working with n-dimensional arrays in Python. NumPy has features for linear algebra, Fourier transform, and random number capabilities. The library is essential for performing mathematical operations on large data sets.

Pandas: Pandas is an open-source data analysis and manipulation tool that allows you to manipulate and analyze data in a variety of ways. Pandas has features for manipulating data structures, reading and writing data files, handling missing data, and merging and grouping data. The library is used extensively in the financial industry, social sciences, and other fields. Steps involved in Data Science modelling include:1. Problem definition and data collection: This step involves defining the problem statement and collecting relevant data.2. Data preprocessing: This step involves cleaning, transforming, and preparing the data for analysis.3. Data exploration: This step involves visualizing and summarizing the data to gain insights and identify patterns.4. Feature engineering: This step involves selecting and creating relevant features for the model.

Model building: This step involves building and training the model using a suitable algorithm.6. Model evaluation: This step involves evaluating the performance of the model on the test data.7. Model deployment: This step involves deploying the model in a production environment.Five application areas of Data Science are:1. Healthcare: Data science is used in healthcare to improve patient care, predict disease outbreaks, and personalize treatment plans.2. Marketing: Data science is used in marketing to analyze customer behavior, identify target audiences, and personalize marketing campaigns.3. Finance: Data science is used in finance to detect fraud, analyze market trends, and develop risk management strategies.4. Manufacturing: Data science is used in manufacturing to optimize production processes, monitor equipment performance, and predict maintenance needs.5. Transportation: Data science is used in transportation to optimize route planning, improve safety, and reduce emissions.

To know more about Python visit:

https://brainly.com/question/31055701

#SPJ11

We use __________ functions to provide values to our private member variables.
Variables under the __________ qualifier can be accessed by name in a derived class, but not anywhere else.
To declare a function or a class as a template, we need a(n) __________.
The __________ is used inside of a template function or in its parameter list as a stand-in for the type we will be replacing.
If a member function is __________, the compiler will wait until runtime to determine the implementation, based on the object that calls it.

Answers

We use setter functions to provide values to our private member variables.
Variables under the protected qualifier can be accessed by name in a derived class, but not anywhere else.
To declare a function or a class as a template, we need a template keyword.
The template parameter is used inside of a template function or in its parameter list as a stand-in for the type we will be replacing.
If a member function is virtual, the compiler will wait until runtime to determine the implementation, based on the object that calls it.

Alice lent money to Bob, and they created a document stating the amount of money Alice lent. This document has been encrypted using the symmetric algorithm AES. Alice and Bob are the only ones who know the key used for encryption. After a while, Alice asked Bob for her money back, and Bob gave her $10. at this point, Alice said the amount of money was $1000, but Bob denied it. They went to the police station and got their copies of the encrypted document. The officer asks Bob and Alice to decrypt the document for further investigation. Surprisingly, Alice's document stated the lent money was $1000. In addition, Bob's document noted the amount of money was $10. according to this scenario, answer the following questions: 1. Why are both documents different? As you know, both copies matched at the agreement time. 2. Clearly, there is a problem in the protocol used; propose another protocol that may not be vulnerable to such a problem.

Answers

The reason for the difference between the two documents is that Alice has changed the original document after symmetric it and before the officer asks Bob and Alice to decrypt it.

This is done by changing the value of the money amount from $10 to $1000 in Alice's original document.2. One protocol that may not be vulnerable to such a problem is the digital signature protocol. This protocol involves the use of a hash function, a private key, and a public key. In this protocol.

Alice will sign the document with her private key, and Bob will verify it with Alice's public key. If the document is changed, the hash value of the document will also change, and the digital signature will become invalid. Thus, any change to the document will be detected, and the protocol will be secure.

To know more about symmetric visit:

https://brainly.com/question/31184447

#SPJ11

In C++, Please show me how to do the code for main.cpp and finance.cpp. Also please label which code is for finance.cpp and main.cpp
Summary
Typically, everyone saves money periodically for retirement, buying a house, or for some other purposes. If you are saving money for retirement, then the money you put in a retirement fund is tax sheltered and your employer also makes some contribution into your retirement fund. In this exercise, for simplicity, we assume that the money is put into an account that pays a fixed interest rate, and money is deposited into the account at the end of the specified period. Suppose that a person deposits R dollars' m times a year into an account that pays I % interest compounded m times a year for t years. Then the total amount accumulated at the end of t years is given by
R
(1+r/m)mt-1 r/m
For example, suppose that you deposit $500 at the end of each month into an account that pays 4.8% interest per year compounded monthly for 25 years. Then the total money accumulated into the account is 500[(1+0.048/12)300 - 1]/(0.048/12) = $289,022.42
On the other hand, suppose that you want to accumulate S dollars in t years and would like to know how much money, m times a year, you should deposit into an account that pays I % interest compounded m times a year. The periodic payment is given by the formula
S(r/m)/(1 + r/m) - 1

Answers

Here's an example implementation of `finance.cpp` and `main.cpp` in C++:

**finance.cpp**:

```cpp

#include "finance.h"

double calculateTotalAmount(double R, double I, double m, double t) {

   double r = I / 100;

   double amount = R * pow((1 + r/m), m*t) - R;

   return amount;

}

double calculatePeriodicPayment(double S, double I, double m, double t) {

   double r = I / 100;

   double payment = (S * r/m) / (1 + r/m - 1);

   return payment;

}

```

**finance.h**:

```cpp

#ifndef FINANCE_H

#define FINANCE_H

#include <cmath>

double calculateTotalAmount(double R, double I, double m, double t);

double calculatePeriodicPayment(double S, double I, double m, double t);

#endif  // FINANCE_H

```

**main.cpp**:

```cpp

#include <iostream>

#include "finance.h"

int main() {

   double R, I, m, t;

   double S;

   // Get user input

   std::cout << "Enter the deposit amount per period (R): ";

   std::cin >> R;

   std::cout << "Enter the interest rate (I): ";

   std::cin >> I;

   std::cout << "Enter the compounding frequency per year (m): ";

   std::cin >> m;

   std::cout << "Enter the number of years (t): ";

   std::cin >> t;

   

   // Calculate and display total amount accumulated

   double totalAmount = calculateTotalAmount(R, I, m, t);

   std::cout << "Total amount accumulated: $" << totalAmount << std::endl;

   // Get user input for target amount

   std::cout << "\nEnter the target amount (S): ";

   std::cin >> S;

   // Calculate and display periodic payment required

   double periodicPayment = calculatePeriodicPayment(S, I, m, t);

   std::cout << "Periodic payment required: $" << periodicPayment << std::endl;

   return 0;

}

```

In this code, `finance.cpp` defines two functions: `calculateTotalAmount` and `calculatePeriodicPayment`, which perform the necessary calculations based on the given formulas. `finance.h` provides function declarations for these functions.

`main.cpp` includes the `finance.h` header and implements the main program logic. It prompts the user for input values for deposit amount per period (R), interest rate (I), compounding frequency per year (m), and number of years (t). It then calls the `calculateTotalAmount` function to calculate and display the total amount accumulated.

After that, it prompts the user for the target amount (S) and calls the `calculatePeriodicPayment` function to calculate and display the periodic payment required.

To know more about implementation visit:

https://brainly.com/question/32181414

#SPJ11

Write a program Increasing Numbers that takes an integer input and computes the following formula: f(i) = {1 , i=1
{2 , i=2
{f(i-1)+f(i-2) , otherwise REQUIREMENTS • The user input is always correct (input verification is not required) • Your code must use recursion. • Your code must work exactly like the following example (the text in bold indicates the user input). Example of the program output: Example 1: Please input a positive integer: 15 The result of the formula for 15 is: 987 Example 2: Please input a positive integer: 12 The result of the formula for 12 is: 233

Answers

The program uses recursion to compute the value of the formula based on the given conditions and provides the output as shown in the examples.

Here's a Python program that satisfies the requirements and calculates the value of the formula using recursion:

def increasing_numbers(n):

   if n == 1:

       return 1

   elif n == 2:

       return 2

   else:

       return increasing_numbers(n - 1) + increasing_numbers(n - 2)

# Prompt the user for input

user_input = int(input("Please input a positive integer: "))

# Calculate the result using the formula

result = increasing_numbers(user_input)

# Display the result

print(f"The result of the formula for {user_input} is: {result}")

When you run this program, it will prompt you to enter a positive integer. After you input the number, it will calculate the value of the formula using recursion and display the result accordingly.

Example 1:

Please input a positive integer: 15

The result of the formula for 15 is: 987

Example 2:

Please input a positive integer: 12

The result of the formula for 12 is: 233

The program defines a recursive function called increasing_numbers that takes an integer n as input.

If n is 1, the function returns 1. If n is 2, the function returns 2.

For any other value of n, the function recursively calculates f(n-1) + f(n-2) by calling itself with n-1 and n-2 as arguments.

The program prompts the user to enter a positive integer and reads the input.

The program calls the increasing_numbers function with the user input as the argument and stores the result.

Finally, the program prints the result using the formatted string that includes the user input.

Learn more about program here:

https://brainly.com/question/14368396

#SPJ4

4. Convert the following mathematical expressions to a \( \mathrm{C}++ \) arithmetic expression, \[ \left(\frac{x \sqrt{y^{2}+7}}{m+3} \log _{2}^{n}+1\right)^{5} \]

Answers

The given mathematical expression that needs to be converted into a C++ arithmetic expression is:$$\left(\frac{x \sqrt{y^{2}+7}}{m+3} \log _{2}^{n}+1\right)^{5}$$In C++, we can use the pow() function to raise a value to any exponent. The pow() function is defined in the  library of C++.

The pow() function takes two arguments, the base, and the exponent. It calculates the result of raising the base to the power of the exponent. For example, pow(2, 3) returns 8 because 2^3 = 8.Converting the given mathematical expression to a C++ arithmetic expression, we get:```cppdouble result = pow(((x * sqrt(pow(y, 2) + 7))/(m + 3)) * log(n)/log(2) + 1, 5);```

Hence, the C++ arithmetic expression is:$\boxed{ \left(\frac{x \sqrt{y^{2}+7}}{m+3} \log _{2}^{n}+1\right)^{5} \ \to \ \texttt{pow(((x * sqrt(pow(y, 2) + 7))/(m + 3)) * log(n)/log(2) + 1, 5)}}.$ We have used the pow() function which is defined in the  library of C++.The pow() function takes two arguments, the base, and the exponent. It calculates the result of raising the base to the power of the exponent. For example, pow(2, 3) returns 8 because 2^3 = 8.The log() function calculates the logarithm of a number to a given base. In this case, we have used the log() function to calculate the logarithm of n to base 2.

To know more about converted visit:

https://brainly.com/question/15743041

#SPJ11

Write a program that reads a list of words. Then, the program outputs those words and their frequencies The program should also delete duplicates and retain only one occurrence of each word, and keep its counts in a parallel int array. The input begins with an integer indicating the number of words that follow. Assume that the list will always contain less than 20 words. Each word will always contain less than 10 characters and no spaces. See Sample Run below in the Criteria for Success section Hint Use two arrays, one char array for the strings and one int array for the frequencies. The output must have unique words and their occurrences before you deleted the duplicates. You may not use any temporary arrays to help you solve this problem. (But you may declare as many simple variables as you like, such as ints.) You also may not use any other data structures or complex types such as strings, or other data structures such as Vector. Use only the concepts and functions we have learned so far. Here is a video that shows you how to read a list of words into a 2-dimensional char array Your program must have function prototypes. Place the prototypes for your functions globally, after your #includes. All functions must be implemented after main(). Try not to have any redundant code (repeated code) in your program. That is the purpose of functions.

Answers

Step: 1

// C++ program to read a list of words from user and output the unique words and their frequency

#include <iostream>

#include <cstring>

using namespace std;

// constants for size of arrays and size of strings

#define MAX_WORDS 20

#define WORD_LENGTH 10

// function prototype

int readWords(char words[MAX_WORDS][WORD_LENGTH]);

void removeDuplicates(char words[MAX_WORDS][WORD_LENGTH], int frequency[MAX_WORDS], int& numWords);

void displayWordFrequency(char words[MAX_WORDS][WORD_LENGTH], int frequency[MAX_WORDS], int numWords);

int main()

{

   // declare arrays for storing words and frequency

   char words[MAX_WORDS][WORD_LENGTH];

   int frequency[MAX_WORDS];

   int numWords = 0; // variable for actual size of array

   cout << "Welcome to my Word Frequency Counter!!" << endl << endl;

   cout << "This frequency will count the number of occurrences of each word. The number of words in" << endl

        << "your list must be entered first followed by the list of words separated by space. These are" << endl

        << "the rules of this frequency counter!" << endl;

   cout << endl << "Enter the count of words first (as a whole number) and the list of words separated by space:" << endl;

   // read list of words from user and return the size of the array

   numWords = readWords(words);

   cout << "\nYour list before deletes and counts:" << endl;

   // loop over the array to display the list of words input

   for(int i=0;i<numWords;i++)

       cout << words[i] << endl;

   // remove duplicate words from array and update the frequency and numWords

   removeDuplicates(words, frequency, numWords);

   // display the words and its corresponding frequency

   displayWordFrequency(words, frequency, numWords);

   return 0;

}

/**

* function that takes as input an array of c-strings

* and populates the array with user input words and

* returns number of words read.

*/

int readWords(char words[MAX_WORDS][WORD_LENGTH])

{

   int numWords;

   // read number of words to read

   cin >> numWords;

   // loop to read numWords into the array words

   for(int i=0;i<numWords;i++)

       cin >> words[i];

   return numWords;

}

/**

* function that takes as input an array of c-strings, an array of integers and size of the

* array by reference and removes all duplicate entries from array and updates numWords to

* contain count for unique words in the array and frequency array to contain count of each

* unique word in words array.

*/

void removeDuplicates(char words[MAX_WORDS][WORD_LENGTH], int frequency[MAX_WORDS], int& numWords)

{

   // loop over the array words

   for(int i=0;i<numWords;i++)

   {

       frequency[i] = 1; // set frequency of ith word to 1

       // loop from index i+1 to end of array

       for(int j=i+1;j<numWords;)

       {

           // strings at index i and j are equal(case-sensitive)

           if(strcmp(words[i], words[j]) == 0)

           {

               frequency[i]++; // increment frequency of ith word by 1

               // loop to shift the elements from index j to numWords-2(inclusive) 1 position to left

               for(int k=j; k<numWords-1;k++)

                   strcpy(words[k],words[k+1]);

               numWords--; // decrement numWords by 1

               strcpy(words[numWords], ""); // set the last entry to empty string

           }

           else // strings at index i and j are not equal, increment j by 1

               j++;

       }

   }

}

/**

* Function that takes as input parallel arrays of c-strings and integers and size

* of the arrays and displays the unique words and their corresponding frequency.

*/

void displayWordFrequency(char words[MAX_WORDS][WORD_LENGTH], int frequency[MAX_WORDS], int numWords)

{

   cout << "\nThe frequency counts and list with unique words are as below:" << endl;

   // loop over the parallel arrays

   for(int i=0;i<numWords;i++)

   {

       // display the ith word and frequency

       cout << words[i] << " " << frequency[i] << endl;

   }

}

// end of program

Know more about Vector:

https://brainly.com/question/30958460

#SPJ4

.What’s the difference in behavior between the To and the From property of the MailMessage class?

Answers

The To property is a string that specifies the address of the recipient of an email message. The From property, on the other hand, is a string that specifies the address of the sender of an email message.

The difference in behavior between the To and the From property of the Mail Message class are listed below:The To property sets the email address of the recipient of an email message. This field is required and should contain a valid email address.

You can assign a single email address or multiple email addresses separated by semicolons to the To property.The From property sets the email address of the sender of an email message. This field is also required and should contain a valid email address. When you send an email message, the email client displays the address in the From field.

To know more about email visit

https://brainly.com/question/31591173

#SPJ11

In the Week 3 Process Flow video showing queueing, how many jobs were in the server at any INSTANT in time? (If you just freeze the video at any point and count the number of jobs in the server, how many jobs are in the server at that instant?)
Group of answer choices
Always zero.
Always one.
Either 3 or 4.
Either zero or one.
Flag question: Question 6
Question 61 pts
In the Week 3 Process Flow video showing queueing, what was the average time in the queue for a job when the arrivals were variable (i.e., when the inter-arrival times were either 1 second, or 5 seconds, or 9 seconds)? You do NOT need to actually calculate anything or closely time anything to answer this question; just watch the video and think about what you saw. Only one answer will be reasonable.
Group of answer choices
0 seconds
3 seconds
10 seconds
13 seconds
Flag question: Question 7
Question 71 pts
A process operates for 10 hours a day. The process experiences demand of 1200 / day (meaning customers wish to purchase 1200 units per day). How many units does the process need to produce per operating minute in order to meet the demand?
Group of answer choices
20
0.5
120
2

Answers

Answer:

I don't know

Explanation:

I am grade 8 student sorry

B1BC
Need 100% perfect answer in 20 minutes.
Please please solve quickly and perfectly.
Write neat.
I promise I will rate positive. b) Briefly explain the function of the following: i. Address bus ii. Data bus iii. Control bus [6 marks] c) The processor includes a Control Unit (CU). Briefly describe the role of the Control Unit in the processor. [4 marks]

Answers

a) B1BC is not a term or a question so I cannot provide an answer to it. b) Briefly explain the function of the following: i. Address bus The address bus is a hardware component that is responsible for conveying memory addresses.

It connects the memory to the CPU. The purpose of the address bus is to designate the location of memory that the CPU wants to access. ii. Data bus The data bus is a hardware component that is responsible for transmitting data between the CPU and memory. The data bus consists of 8, 16, 32, or 64 parallel wires that transmit data.  

Control bus The control bus is a hardware component that is responsible for transmitting control signals between the CPU, memory, and other hardware components. It includes signals such as the read and write signals and the interrupt signal. c) The processor includes a Control Unit (CU). Briefly describe the role of the Control Unit in the processor. The Control Unit (CU) is responsible for controlling the flow of data and instructions within the processor. It acts as the supervisor for the processor. It receives instructions from the memory, decodes them, and directs the operation of the processor's other components. It also generates control signals that are sent to the other hardware components, such as the ALU and memory. The Control Unit ensures that the processor follows the correct sequence of operations when executing instructions.

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

. EHRs lacking the capability to receive data is a barrier of interoperability and sending health information. a. True b. False Answer: p. 70 9. This was created when the government recognized the need to have a coherent and consistent approach to connecting all the different HIEs and HINs for nationwide interoperability. a. U.S. Interoperability Agreement b. Trusted Exchange Framework and Common Agreement c. HITECH Act d. Cures Act Answer: p. 70 10. Which act was created to prohibit information blocking? a. 21" Century Cares Act b. HITECH Act c. TEFCA d. HIPAA Answer: p 70

Answers

The Trusted Exchange Framework and Common Agreement (TEFCA) was created by the government to establish a standardized and consistent approach to connecting various Health Information Exchanges (HIEs) and Health Information Networks (HINs) for nationwide interoperability.

TEFCA aims to promote seamless and secure exchange of health information across different systems and organizations.

The answer is a. 21st Century Cures Act. The 21st Century Cures Act was created to prohibit information blocking in the healthcare industry. Information blocking refers to practices that prevent or hinder the exchange of health information between healthcare providers, patients, and other relevant parties. The act aims to promote interoperability and improve access to health information by addressing barriers and encouraging the sharing of electronic health records (EHRs) and other health data.

Please note that the page numbers provided (p. 70) are not applicable in this context, as they seem to refer to specific references in a book or document.The answer is b. Trusted Exchange Framework and Common Agreement.

Learn more about connecting here

https://brainly.com/question/31378823

#SPJ11

\( \mathcal{H} \)-Given the language: \[ L_{8}=\left\{0^{m}(101)^{n} \mid m, n \in \mathbb{Z} \text { and } m, n \geq 1 \text { and } m \geq n\right\} \] Is \( L_{8} \) Regular? Circle the appropriate

Answers

Because L8 violates the pumping lemma for regular languages, we can conclude that L8 is not regular.

No, the language L8 is not regular. A regular language can be recognized by a finite state automaton (FSA), which has a finite number of states and reads symbols from an input string to determine acceptance or rejection.

However, L8 violates the pumping lemma for regular languages, providing evidence that it is not regular.

The pumping lemma states that for any regular language L, there exists a pumping length p such that any string in L with a length of at least p can be divided into five parts: u, v, w, x, and y.

These parts satisfy three conditions: 1) vwx is the same as the original string, 2) v and x together have a length of at most p, and 3) for any natural number k, the string uv^kwx^ky is also in L.

In the case of L8, consider the string 0101101, where m = 3 and n = 2. According to the language definition, this string should be in L8. However, if we try to apply the pumping lemma, we run into a contradiction.

Since the string has a length of 7, which is less than p, we cannot divide it into five parts that satisfy the pumping lemma conditions.

For more such questions on lemma,click on

https://brainly.com/question/30819932

#SPJ8

The Probable question may be:
Given the language:L8= {0 (101)" m, ne Z and m, n > 1 and m>n}

Is Lg Regular? Circle the appropriate answer and justify your answer.

5 Suppose memory has 256KB, OS use low address 20KB, there is one program sequence: (20)
Prog1 request 80KB, prog2 request 16KB,
Prog3 request 140KB
Progl finish, Prog3 finish;
Prog4 request 80KB, Prog5 request 120kb
Use first match and best match to deal with this sequence
(from high address when allocated)
(1)Draw allocation state when prog1,2,3 are loaded into memory? (5)
(2)Draw allocation state when prog1, 3 finish? (5)
(3)use these two algorithms to draw the structure of free queue after prog1, 3 finish(draw the allocation descriptor information,) (5)
(4) Which algorithm is suitable for this sequence 2 Describe the allocation process? (5)

Answers

(1)Draw allocation state when prog1, 2, 3 are loaded into memory? First-fit allocation algorithm should be used here. The memory allocation can be depicted as follows: The total size of the memory is 256KB. The operating system uses low address 20KB. Prog1 requests 80KB, prog2 requests 16KB, and Prog3 requests 140KB.

Prog1 uses the first 80KB of the memory. After this, 96KB of memory remains free, which is represented by the white space. Prog2 uses 16KB from the 96KB of free memory after Prog1, leaving 80KB of memory available. After this, Prog3 uses the first 96KB of the remaining memory, and the memory allocation state is as illustrated above. (2) Draw allocation state when prog1, 3 finish? When Prog1 and Prog3 are finished, the allocation state of memory is depicted below:



Prog1 uses 80KB from the first 96KB of memory allocated, and Prog3 uses the first 140KB of memory allocated. After both programs have completed, the allocated memory becomes free again. The memory size available is 80KB + 140KB = 220KB. The free memory can be allocated to other programs. (3) Use these two algorithms to draw the structure of the free queue after prog1, 3 finish. (draw the allocation descriptor information)Both the First-fit algorithm and Best-fit algorithm can be used to draw the structure of the free queue after Prog1, 3 finish.
First-Fit Algorithm: The allocation descriptor information is drawn as shown below: Best-fit Algorithm:(4) Which algorithm is suitable for this sequence 2 Describe the allocation process? Both the First-fit and Best-fit algorithms are suitable for this sequence. However, the best-fit algorithm is preferable because it optimizes the utilization of memory. First-fit Algorithm Allocation Process: Allocate memory to a program that first requests memory. The program must first receive the requested memory, and the memory must be allocated contiguously. If the required contiguous memory is not found, the allocation fails, and an error message is displayed. After that, the next program is considered. In this example, Prog1 is allocated first, then Prog2 and Prog3.Best-fit Algorithm Allocation Proces :Allocate the smallest possible block of memory from the available free memory. Prog1 is assigned to a 96KB block. When Prog2 is allocated, it searches the free memory for the smallest block of memory that is equal to or greater than the requested memory (16KB). The smallest available memory block is 80KB. Prog3 is allocated to the 140KB block. When Prog4 is allocated, it searches the free memory for the smallest block of memory that is equal to or greater than the requested memory (80KB). The smallest available memory block is 80KB. Then, Prog5 is assigned to the 120KB block.

To know more about algorithm visit:

https://brainly.com/question/28724722

#SPJ11

An algorithm is a guiding rule used to solve problems or make decisions. Please select the best answer from the choices provided T F

Answers

True. An algorithm can be defined as a step-by-step procedure or a set of rules designed to solve a specific problem or perform a particular task.

It serves as a guiding rule for problem-solving or decision-making processes. Algorithms are used in various fields, including computer science, mathematics, and even everyday life.

In computer science, algorithms are fundamental to programming and software development. They provide a systematic approach to solving complex problems by breaking them down into smaller, manageable steps.

Algorithms can range from simple and straightforward to highly complex, depending on the nature of the problem they aim to solve.

The importance of algorithms lies in their ability to provide a structured and efficient solution to a given problem. They help in achieving consistency, accuracy, and reproducibility in decision-making processes. Additionally, algorithms enable automation and optimization, allowing for faster and more reliable problem-solving.

It is essential to acknowledge and respect the originality and intellectual property of others when using algorithms developed by someone else. Proper citation and avoiding plagiarism are crucial to ensure the integrity of one's work and uphold ethical standards.

For more such questions on algorithm,click on

https://brainly.com/question/29927475

#SPJ8

Alice, who often uses her company's secure mail server, has just lost her private key, but still has the corresponding public key. i. Is Alice still able to send secret mail? Why? [2 marks] ii. Is Alice still able to decrypt secret mail she receives? Why? [2 marks] iii. Is Alice still able to sign the mail she sends? Why? [2 marks] iv. Is Alice still able to verify the signature of mail she receives? Why? [2 marks] v. Alice wants to send a message m to Bob. She creates a hash of the message hash(m), encrypts this hash with Bob's public key, and sends the encrypted hash with the message m to Bob. Can Bob validate that the content of the message m has not been modified during transmission? Justify your answer. [3 marks)

Answers

i. Alice won't be able to send secret mail, because the private key is used to encrypt the message and without the private key she can't encrypt messages to ensure confidentiality.ii. Alice won't be able to decrypt the secret mail she receives because the public key is used for encryption and the private key is used for decryption. If she has lost her private key, Alice cannot decrypt any messages she receives.iii.

Alice can no longer sign the mail she sends because she needs the private key to create a digital signature. Digital signatures are used to ensure the integrity of a message. iv. Alice can verify the signature of the mail she receives because the public key is used to verify the signature of a digitally signed message. The digital signature provides authentication and integrity of the message.v. Bob can validate that the content of the message m has not been modified during transmission because Alice has encrypted the hash of the message using Bob's public key.

When Bob receives the message, he can use his private key to decrypt the hash and then compute the hash of the message himself. If the hash he computes matches the hash Alice sent, he can be sure that the message has not been modified during transmission. Therefore, the hash of a message can be used to ensure the integrity of a message.

To know more about encrypt visit:-

https://brainly.com/question/30225557

#SPJ11

Add the components to the frame setvisible(true); }
// 2- Write a private inner class that handles the events when the user clicks one of the buttons. public static void main (String [] args) { new Calculator(); }
}

Answers

The code adds components to a calculator GUI and includes a private inner class for handling button clicks.

The program codes are described below.

The required program is,

import javax.swing.*;

import java.awt.*;

import java.awt.event.*;

public class Calculator extends JFrame {

   private JTextField textField;

   private JButton[] numberButtons;

   private JButton[] functionButtons;

   private JButton addButton;

   private JButton subtractButton;

   private JButton multiplyButton;

   private JButton divideButton;

   private JButton equalsButton;

   private JButton decimalButton;

   private JButton clearButton;

   private JPanel panel;

   private Font font;

   // Constructor

   public Calculator() {

       font = new Font("Arial", Font.BOLD, 20);

       textField = new JTextField();

       textField.setFont(font);

       textField.setHorizontalAlignment(JTextField.RIGHT);

       textField.setEditable(false);

       numberButtons = new JButton[10];

       for (int i = 0; i < 10; i++) {

           numberButtons[i] = new JButton(String.valueOf(i));

           numberButtons[i].setFont(font);

           numberButtons[i].addActionListener(new NumberButtonListener());

       }

       functionButtons = new JButton[9];

       addButton = new JButton("+");

       subtractButton = new JButton("-");

       multiplyButton = new JButton("×");

       divideButton = new JButton("÷");

       equalsButton = new JButton("=");

       decimalButton = new JButton(".");

       clearButton = new JButton("C");

       functionButtons[0] = addButton;

       functionButtons[1] = subtractButton;

       functionButtons[2] = multiplyButton;

       functionButtons[3] = divideButton;

       functionButtons[4] = equalsButton;

       functionButtons[5] = decimalButton;

       functionButtons[6] = clearButton;

       for (int i = 0; i < 7; i++) {

           functionButtons[i].setFont(font);

       }

       panel = new JPanel();

       panel.setLayout(new GridLayout(4, 4, 10, 10));

       panel.setBackground(Color.LIGHT_GRAY);

       panel.add(clearButton);

       for (int i = 1; i < 10; i++) {

           panel.add(numberButtons[i]);

       }

       panel.add(addButton);

       panel.add(numberButtons[0]);

       panel.add(subtractButton);

       panel.add(multiplyButton);

       panel.add(divideButton);

       panel.add(decimalButton);

       panel.add(equalsButton);

       this.add(textField, BorderLayout.NORTH);

       this.add(panel, BorderLayout.CENTER);

       this.setTitle("Calculator");

       this.setSize(300, 400);

       this.setVisible(true);

   }

   // Private inner class for handling button clicks

   private class NumberButtonListener implements ActionListener {

       public void actionPerformed(ActionEvent e) {

           for (int i = 0; i < 10; i++) {

               if (e.getSource() == numberButtons[i]) {

                   textField.setText(textField.getText() + String.valueOf(i));

               }

           }

       }

   }

   public static void main(String[] args) {

       new Calculator();

   }

}

To learn more about programming visit:

https://brainly.com/question/14368396

#SPJ4

The structure Auto is declared as follows: struct Auto { string Make; string Model; int Year: double Price; }; Write a definition statement that defines a Auto structure variable called MyCar and initialized it, in one line of code, with the following data: Make: Ford Model: F350 Year: 2022 Price: $72,000.00

Answers

The definition statement that defines a `Auto` structure variable called `MyCar` and initialized it, in one line of code, with the following data is as follows:

MyCar = {"Ford", "F350", 2022, 72000.00}```It can be noted that the struct `Auto` is declared as follows:```struct Auto { string Make; string Model; int Year; double Price; };```Here, `MyCar` is a variable of the `Auto` structure. In order to initialize it with the given data, we can use the above-mentioned code snippet. This initializes each of the members of `MyCar` in order.

That is, `Ford` is assigned to `Make`, `F350` is assigned to `Model`, `2022` is assigned to `Year` and `72000.00` is assigned to `Price`.Thus, the initialized `MyCar` has `Make: Ford`, `Model: F350`, `Year: 2022`, and `Price: $72,000.00`.
To know more about structure visit :

https://brainly.com/question/30391554

#SPJ11

27) What is the difference between Linux work station and Linux server 28) The home directory of the root user is (b1) a./home b./home/root c. /root d. /root/home

Answers

Linux Work Station and Linux Server Linux workstations are desktops or laptops running on a Linux operating system designed for personal use, while Linux servers are computers used to manage and provide network services to other computers.

Linux servers are larger in size and have more powerful hardware capabilities than Linux workstations. They are also optimized for high-performance computing and come with more extensive network connectivity and administration capabilities. Their high performance, reliability, security, and affordability make them ideal for a wide range of applications, including web servers, email servers, file servers, and database servers.

The home directory of the root user is /root. This is the default home directory for the root user account, and it is typically used to store configuration files and other system-related data. They are also optimized for high-performance computing and come with more extensive network connectivity and administration capabilities. Their high performance, reliability, security, and affordability make them ideal for a wide range of applications, including web servers, email servers, file servers, and database servers. It is a critical system directory and should only be modified by advanced users with administrative privileges.

To know more about workstations visit:

https://brainly.com/question/13085870

#SPJ11

User Defined function in MATLAB Design Goal: Write a Matlab FUNCTION that will take two numbers as inputs and returns as a solution the larger number divided by the smaller number. If the smaller number is zero, return nothing (NULL) as the solution and display a message to the user, "!!! Can't divide by 0 (zero) !!! " Example: input1 = 5; input2 = 200; result = 40 Example: input1 i= 5;
input2 = 200; result = 40 Example: input1 = 200; input2 = 5; result = 40 Example: input1 = 0; input2 = -5; result = 0 Example: input1 = 0; input2 = 5; result = [ ] !!! Can't divide by 0 (zero) !!!

Answers

MATLAB function that takes two numbers as inputs and returns the larger number divided by the smaller number is given below.

We have,

MATLAB function that takes two numbers as inputs and returns the larger number divided by the smaller number.

It also handles the case of dividing by zero and displays an appropriate message:

function result = divideNumbers(input1, input2)

   if input2 == 0

       result = [];

       disp('!!! Can''t divide by 0 (zero) !!!');

   else

       result = max(input1, input2) / min(input1, input2);

   end

end

This function checks if input2 is equal to zero. If it is, it assigns an empty array [] to the result variable and displays the error message "!!! Can't divide by 0 (zero) !!!" to the user.

Otherwise, it calculates the division max(input1, input2) / min(input1, input2) to get the desired result.

Thus,

You can call this function by passing two numbers as arguments, and it will return the division of the larger number by the smaller number, taking care of the division by zero case.

Learn more about MATLAB function here:

https://brainly.com/question/30641994

#SPJ4

Which of the following is correct in terms of element movements required, when inserting a new element at the end of a List?
a. Array-List performs better than Linked-List.
b. Linked-List performs better than Array-List.
c. Linked List and Array-List basically perform the same.
d. All of the other answers

Answers

In terms of element movements required, Linked-List performs better than Array-List when inserting a new element at the end of a List.

Hence, option (b) is correct.

A Linked-List contains Nodes that have a reference to the next node in the List while an Array-List is a List implemented on top of a dynamically allocated array. While adding new items to an ArrayList, a new, larger array is frequently required as more objects are added, and the older array is copied to the new array after that, which is a resource-intensive process.

While, when we add a new element at the end of a Linked-List, we only need to modify the reference of the current last node to the new node, thus the amount of element movements required to insert a new element in a Linked-List is less than that in an Array-List. Hence, Linked-List performs better than Array-List in terms of element movements required when inserting a new element at the end of a List.

To know more about Linked-List visit :

https://brainly.com/question/30763349

#SPJ11

Consider the following declarations, which appear in the main() function of a program. uint32_t x = 100; uint32_t* y = &x; (a) The statement std::cout << y << std::endl; prints which of the following? A. the value of x B. the type of x C. the size of x in bytes D. the memory address of x (b) The statement
std::cout << *y << std::endl; prints which of the following? A. the value of x B. the type of x C. the size of x in bytes D. the memory address of x (c) Which property of x may change during its lifetime? A. the value of x B. the type of x C. the size of x in bytes D. the memory address of x

Answers

(a) function of a program The statement `std::cout << y << std::endl;` prints the memory address of x.The declaration `uint32_t* y = &x;` declares a pointer y that holds the address of x.

(b) The statement `std::cout << *y << std::endl;` prints the value of x.The declaration `uint32_t* y = &x;` declares a pointer y that holds the address of x. In this case, using the `*` operator in front of `y` dereferences the pointer, giving the value of x.(c) The value of x may change during its lifetime.

The value of x may change during its lifetime. In this case, x is declared as a uint32_t variable and is assigned a value of 100. The value of x can be changed by updating its value during runtime. Therefore, the value of x can change during its lifetime.

To know more about function of a program visit:

https://brainly.com/question/31845388

#SPJ11

you have an azure subscription that contains the following resources: a network interface named nic1 a virtual machine named vm1 a virtual network named vnet1 a virtual subnet named subnet1 you create a network security group (nsg) named nsg1. to which resources can you assign nsg1?

Answers

In an Azure subscription, you can assign a Network Security Group (NSG) named nsg1 to various resources, including network interfaces, virtual machines, and subnets.

Specifically, you can assign nsg1 to the following resources: Network Interface: You can associate nsg1 with the network interface named nic1. By assigning the NSG to the network interface, you can control inbound and outbound traffic to and from that interface.

Virtual Machine: You can associate nsg1 with the virtual machine named vm1. This allows you to define inbound and outbound security rules that govern network traffic to and from the virtual machine.

Subnet: You can associate nsg1 with the virtual subnet named subnet1 within the virtual network vnet1. Assigning the NSG to a subnet allows you to apply security rules that regulate network traffic within the subnet.

By assigning the NSG to these resources, you can implement network security policies, control access, and monitor and filter network traffic based on defined rules and configurations. This helps in securing and protecting the resources within your Azure environment.

Learn more about machines here

https://brainly.com/question/5420397

#SPJ11

Answer:

NIC1, Subnet1

Explanation:

Network security group (NSG) can be associated to any virtual network subnet and/or network interface in a virtual machine

Check if a form input is float and round up if that's the case.
I have a form and I want to check if the input is float and round up if that's the case. Why is my code not working?



const figure = document.getElementById(figure");
figure.addEventListener("change", (event) =>
if(!isNaN(parseFloat(figure.value))) {
class_limit = Math.round(event.target.value)}
else {
class_limit = event.target.value
} } )
(default_figure = event.target.value));

Answers

There are a few issues with the code. Here's the corrected version:

```javascript

const figure = document.getElementById("figure");

figure.addEventListener("change", (event) => {

 if (!isNaN(parseFloat(figure.value))) {

   class_limit = Math.ceil(parseFloat(event.target.value));

 } else {

   class_limit = event.target.value;

 }

});

```

Here's an explanation of the corrections made:

1. The line `const figure = document.getElementById(figure");` has a syntax error. It should be `const figure = document.getElementById("figure");` with the closing double quote for the ID value.

2. The code was missing opening and closing curly braces for the arrow function inside the event listener. The corrected code is `(event) => { ... }`.

3. In the line `class_limit = Math.round(event.target.value)}`, there's a closing curly brace (`}`) after `value`. It should be removed to close the if statement properly.

4. The line `(default_figure = event.target.value));` is incomplete and seems unnecessary. It can be removed.

Know more about javascript:

https://brainly.com/question/16698901

#SPJ4

Which of the following is true regarding computer science?
O Jobs in this field are limited.
OIt only involves writing code.
OIt involves more than just writing code.
O Only a programmer can work in this field.

Answers

The true statement regarding computer science is -  "It involves more than just writing code."  (Option c)

 How   is this so?

Computer science is a multidisciplinary field that encompasses various areas such as algorithms,   data structures,software development, artificial intelligence, cybersecurity, computer networks, and more.

While coding is a fundamental aspect,computer science involves problem-solving, analysis, design,   theoretical understanding, and application of computing principles.

It offers a wide range   of career opportunities beyond programming, including research,system analysis, data science, and technology management.

Learn more about computer science at:

https://brainly.com/question/20837448

#SPJ1

While testing new functionality, what should a tester use as reference?
1) the testers own experience
2) the acceptance criteria
3) the bugs that have most commonly appeared in that part of the system historically
4) the customers feedback

Answers

While testing new functionality, a tester uses a reference because of the acceptance criteria, the customer feedback, the bugs that have most commonly appeared in that part of the system historically, and the experience, so here all the options are correct.

The acceptance criteria explains the behavior and functionality of the new feature, while the testers should refer to the test plan and test cases that are specifically designed to test the new functionality. User feedback can provide valuable information into the usability and functionality of the system, and the previous bu report to the same system would help to enable enhancements in the system.

Learn more about the tester here

https://brainly.com/question/32156038

#SPJ4

which data model(s) depicts a set of one-to-many relationships?a.)both hierarchical and networkb.)neitherc.)networkd.)hierarchicala.)neitherb.)both hierarchical and networkc.)networkd.)hierarchicala.)hierarchicalb.)both hierarchical and networkc.)networkd.)neithera.)an organization would like to create a movie rating application allowing users to identify what movies they have purchased, what they have watched, and how much they liked a movie.b.)an organization would like to add a rating system to their existing movie rental database. the rating system would be a new feature to be released in the next iteration.c.)an organization would like to create a reporting system off of movie rating databases to poll from on a real-time basis to display results to users on their website.d.)an organization would like to pull the current ratings of movies from different sites to display on their own website, based on the movies that users have selected.a.)nightly backupb.)differential backupc.)full backupd.)incremental backupa.)we can run the backups in batch.b.)we can backup multiple databases at once.c.)we can choose different interfaces based on the database to use.d.)we can backup a remote server.

Answers

The correct answers to the multiple-choice questions are as follows: The data model that depicts a set of one-to-many relationships is: d.) hierarchical.

The scenario that best aligns with creating a movie rating application is: a.) an organization would like to create a movie rating application allowing users to identify what movies they have purchased, what they have watched, and how much they liked a movie.

The scenario that best aligns with adding a rating system to an existing movie rental database is: b.) an organization would like to add a rating system to their existing movie rental database. The rating system would be a new feature to be released in the next iteration.

The scenario that best aligns with creating a reporting system off of movie rating databases is: c.) an organization would like to create a reporting system off of movie rating databases to poll from on a real-time basis to display results to users on their website.

The scenario that best aligns with pulling current ratings of movies from different sites is: d.) an organization would like to pull the current ratings of movies from different sites to display on their own website, based on the movies that users have selected.

The type of backup that only includes the data that has changed since the last full backup is: d.) incremental backup.

The statement that is true about backups is: b.) we can backup multiple databases at once.

Please note that these answers are based on the provided options, and there may be other valid considerations or approaches depending on the specific context or requirements.

Learn more about hierarchical here

https://brainly.com/question/28507161

#SPJ11

Write the code that finds the average of the data in a selected time interval and displays it on the emulator screen.
This is an Mobile App Application
Program Language:C#
Program Platform:Visual Studio Code

Answers

To find the average of the data in a selected time interval and display it on the emulator screen, you can use the following C# code in Visual Studio Code:```csharp//.

Assuming you have a list of data points in the form of a double[] array named 'data'// and two DateTime variables named 'startTime' and 'endTime' representing the selected time interval double assuming you want to display the result on the emulator screen instead of the console.

In this code, we first initialize the sum and count variables to 0. Then, we loop through each data point in the data array and check if it falls within the selected time interval. If it does, we add its value to the sum and increment the count. After the loop, we calculate the average by dividing the sum by the count. Finally, we display the result on the emulator screen using the appropriate display function for your mobile app application.

To know more about code visit :

https://brainly.com/question/15301012

#SPJ11

Other Questions
Individual Problems 5-6 In early 2008, you purchased and remodeled a 120-room hotel to handle the increased number of conventions coming to town. By mid-2008, it became apparent that the recession would kill the demand for conventions. Now, you forecast that you will be able to sell only 10,000 room-nights, which cost $70 per room per night to service. You spent $30.00 million on the hotel in 2008 , and your cost of capital is 10%. The current going price to sell the hotel is $25 million. If the estimated demand is 10,000 room-nights, the break-even price is per room, per night. (Hint: Remember that the cost of capital is the opportunity cost, or true cost, of making an investment.) how is ip related to tcp in the tcp/ip protocol stack? (check all that apply) group of answer choices a tcp segment is the data payload of an ip datagram an ip datagram is the data payload of a tcp segment the tcp protocol is responsible for delivering the data to the destination host, and then the ip protocol ensures reliable delivery of the data to the destination application. the ip protocol is responsible for delivering the data to the destination host, and then the tcp protocol ensures reliable delivery of the data to the destination application. Summarize some of the ways you could make soical studies moreaccessible for English Language Learners in your classroom as ateacher What is the angle of elevation from her hand up to the kite, and what is the horizontal distance from her hand to directly below the kite? (Round your answers to the nearest tenth) animal spirits, bullishness and bearishness primarily refer to? optimism and pessimism regarding future economic performance the spirit of a good leader the likelihood that unions will negotiate the direction of the trade balance Suppose rate of inflation for 2010 was 6 percent. If the CPI for 2010 was 89 , the CPI in 2009 must have been Your Answer: Answer - Do not round any intermediate steps. Only round the final answer. - Round to the nearest second decimal places, or do not round at all. - For example, if your answer is 1.234, then round to 1.23 or type in 1.234. - Another example: if your answer is 1.236, then round to 1.24 or type in 1.236 What more could havebeen done in order to provide safety andchange for many of the African Americansthat lived there would you be harsher to thesouth, or kinder - why?8-9 sentences 2 paragraph at clickz, an american photography magazine publisher, more than half of the senior management positions are held by women. african americans represent 40 percent of the company's workforce. the description of clickz's diversity refers to which type of diversity? 3. Which triangle should be solved by beginning with the Law of Cosines? (A) mLA=115, a = 19, b = 13 (B) mLB=48, a = 22, b = 5 (C) mLA= 62, mLB= 15, b= 10 (D) mLA = 50, b = 20, c = 18 In a forward market hedge, a company that is long a foreign currency will the foreign currency forward, whereas a company that is short a foreign currency will the currency forward. 1) buy; sell 2) sell; buy 3) borrow; sell 4) lend; buy Consider the IR spectra of 2-hexanone, in which the carbonylcarbon is found at 1718 cm-1.What is the length (in nanometers) of the associated wave? Consider The Function Below. G(X) = 210 + 8x3 + X4 (A) Find The X-Coordinate(S) Of Any Local Minima. (Enter Your Answers As A Challenge: From the aforementioned, you are called to design and build your own stethoscope, namely "MyBlueSteth". As it is deduced from the name, your solution would be wireless and should be based on Bluetooth, in order to send the sensed heart sound from the body to the smartphone/PC for archiving and reproduction. In this vein, you also need to create an app that could run at the smartphone and/or PC, where the acoustic files could be saved and corresponded to each patient, so the physician could replay and listen Fig. 3. (Top) Waveform of a normal heart sound, where S1 denotes first heart sound S2 denotes second heart sound. (Bottom) Frequency distribution of normal and pathological (gallop rhythm and systolic murmurs) heart sounds. 3 to them. The app should have an interface (dashboard) where the basic functionalities should be covered, i.e.: User name Password User type (e.g., patient, doctor, admin) Doctors Dashboard: Patient selection menu Calendar with dates that include heart sound recordings from the selected patient Recorded heart sounds per selected date Player of the selected heart sounds Visualization of the heart sounds in time and corresponding frequency domains Patients Dashboard Calendar with dates that include heart sound recordings Recorded heart sounds per selected date Player of the selected heart sounds Classify this quadrilateral.A. SquareC. Trapezoid+B. IsoscelesD. Rhombus Klass Joinery Limited has been offered the opportunity to purchase key raw materials on credit terms of net 30 days from the invoice date with a 1.1% cash discount if paid within 5 days. What is the implicit interest cost of foregoing the cash discount? (Important: Please enter your answer to the nearest 10th of a percent. For example, 10.1% should be entered in as 0.101) What type of the 3 types of plate boundaries is the HungaTongaHunga Haapai submarine volcano on ? 9. Draw the resonance structures of the following compound. (6 points) How much nitrogen is in 50 pounds of \( 25-7-12 ? \) \( 6.25 \) \( 12.5 \) 50 25 44 How many subsets does the set {a,b,c,d,e,f} have? 36 12. 64 6 A 178-day T-bill with $1000 face value has dealer's quote as follows: Maturity Days to maturity Bid (%) Asked (%) Price Ask yield 3/5/2020 178 1.823 1.813 Which of the following statements is NOT correct? Select one: The ask yield is annual percentage yield based on the asked price The bid discount rate is to determine what price the dealer sells to investors The bid discount rate is to determine what price the dealer buy from investors The ask discount rate is to determine what price the dealer sells to investors Dealer's bid price must be lower than ask price.