Answer: A more detailed information like the nucleus of cells on the slide is seen as the magnification Increases.
Explanation:
The microscope is an instrument used in a laboratory to view magnified image of an object ( cells on a slide). There are two types:
--> Simple microscope and
--> Compound microscope.
Simple microscope is used to view an object using JUST ONE convex lens, and the image formed is usually erect and magnified.
Compound microscope has a higher magnification compared to a simple microscope. It is produced by using TWO CONVERGING LENS of short focal length. Here, the two lenses used are classified according to their positions. The lens near the object is called the objective lens while the one nearer to the eye is called the eyepiece lens.
The objective lens of the compound lens used in the laboratory has ×4, ×10, ×40, ×100 magnifications. As the magnification of the objective lens is increased from ×4 to ×10 a more detailed information of the image is seen as the diameter of field of view decreases. For example the constituents of a cell like the nucleus can be viewed using a higher magnification.
a traveling wave is described by equation y(x,t)=0.003(20x+200t) whereby y and x are measured in meters and t in second .what is the period of this wave?
Answer:
0.0314secs
Explanation:
The standard equation of a wave is expressed as;
y(x,t) = Asin(2πx/λ+2πft)
compare and contrast with the equation y(x,t)=0.003(20x+200t)
2πft = 200t
2πf = 200
f = 200/2π
f = 100/π
Since period T = 1/f
T = π/100
T = 3.14/100
T = 0.0314secs
hence the period of the wave is 0.0314secs
An airplane flies eastward and always accelerates at a constant rate. At one position along its path, it has a velocity of 34.5 m/s . It then flies a further distance of 46100 m , and afterwards, its velocity is 40.7 m/s . Find the airplane's acceleration.
Answer:
the acceleration of the airplane is 5.06 x 10⁻³ m/s²
Explanation:
Given;
initial velocity of the airplane. u = 34.5 m/s
distance traveled by the airplane, s = 46,100 m
final velocity of the airplane, v = 40.7 m/s
The acceleration of the airplane is calculated from the following kinematic equation;
v² = u² + 2as
[tex]2as= v^2 - u^2\\\\a = \frac{v^2 - u^2}{2s} \\\\a = \frac{(40.7)^2 -(34.5)^2}{2 \times 46,100} \\\\a = 5.06 \ \times \ 10^{-3} \ m/s^2[/tex]
Therefore, the acceleration of the airplane is 5.06 x 10⁻³ m/s²
Blue ran 100 m south then 50 m north
all togather becomes 150 m
or 150 ×100cm = 15000cm
A student drops an object from rest above a force plate that records information about the force exerted on the object as a function of time during the time interval in which the object is in contact with the force plate. Which of the following measurements should the student take, in addition to the measurements from the force plate, to determine the change in momentum of the object from immediately before the collision to immediately after the collision?
a. The mass of the object.
b. The final speed of the object MOH 5000
c. The distance fallen by the object
d. The student has enough information to make the determination
Answer:
D
Explanation:
The student has enough information to make the determination
Measurements should the student take, in addition to the measurements from the force plate, to determine the change in momentum of the object from immediately before the collision to immediately after the collision the student has enough information to make the determination. Thus, option D is correct.
What happens during the experiment?A student drops an object from rest above a force plate that records information about the force exerted on the object as a function of time during the time interval in which the object is in contact with the force plate.
Momentum has the measure of motion of the object. Momentum is given by the product of mass and the velocity of the object. The law of conservation of momentum states that the momentum before the collision is equal to the momentum after the collision. It also states that the total momentum of a system or a body remains constant.
Therefore, Measurements should the student take, in addition to the measurements from the force plate, to determine the change in momentum of the object from immediately before the collision to immediately after the collision the student has enough information to make the determination. Thus, option D is correct.
Learn more about Measurements on:
https://brainly.com/question/2107310
#SPJ5
A teacher asks students to make a model of a transform plate boundary the students use blocks to represent tectonic plates and Slide the blocks past each other in the directions of the arrows as shown which event can the students best demonstrate with their models
Answer:
Hello your question is incomplete hence I will give you a general answer as regards to tectonic plates sliding past each other in a sideways direction
answer : The Transform boundary is been demonstrated by the students when sliding tectonic plates past each other in sideways directions
Explanation:
The event that can be demonstrated by the students using blocks to represent tectonic plates and sliding the clocks past each other in sideways direction is Transform Boundary of the tectonic plates
a railway train 100m long passes over a bridge 400m long at 20ms.1 how long will it take to pass over the bridge
Total length to be covered=400+100=500mts
time =distance/speed
=500/20
=25 sec
What is the electrical consumption in KVA of a motor powered by a 3-phase, 60 Hz, 460 VAC supply that continuously draws 17 A
Answer:
15.34 kVA
Explanation:
A motor is a device that converts electrical energy into mechanical energy. It takes in electrical energy at the input and produce torque (motion) at the output.
The power consumption for a three phase motor is the product of voltage and current and √3. The √3 is because it is a three phase supply.
Hence Power (P) =√3 × voltage (V) × current (I)
P = √3 × V × I
Given that voltage (V) = 460 V, current (I) = 17 A. Hence:
P = √3 × V × I = √3 × 460 × 17 = 13544.64 VA
But 1000 VA = 1 kVA. Hence:
[tex]P=13544.64\ VA*\frac{1\ kVA}{1000\ VA}=13.54\ kVA[/tex]
1. Calculate the heat capacity of a piece of wood if 1500.0 g of the wood absorbs 6.750.000 joules of heat,
and its temperature changes from 32°C to 57°C.
Answer:
1.8 J/gºC
Explanation:
From the question given above, the following data were obtained:
Mass (M) = 1500 g
Heat (Q) absorbed = 67500 J
Initial temperature (T₁) = 32 °C
Final temperature (T₂) = 57 °C
Specific heat capacity (C) =?
Next, we shall determine the change in temperature of the wood. This can be obtained as follow:
Initial temperature (T₁) = 32 °C
Final temperature (T₂) = 57 °C
Change in temperature (ΔT) =.?
ΔT = T₂ – T₁
ΔT = 57 – 32
ΔT = 25 °C
Finally, we shall determine the heat capacity of the wood. This can be obtained as follow:
Mass (M) = 1500 g
Heat (Q) absorbed = 67500 J
Change in temperature (ΔT) = 25 °C
Specific heat capacity (C) =?
Q = MCΔT
67500 = 1500 × C × 25
67500 = 37500 × C
Divide both side by 37500
C = 67500 / 37500
C = 1.8 J/gºC
Thus, the heat capacity of the wood is 1.8 J/gºC
Please help if giving 20 points and brainliest
You have designed a prototype of a new, lighter material. What should be the
next step in your process?
O A. Figure out what problems people want to solve.
B. Update your initial design for the new type of material.
O c. Test to see whether your material is strong and works well.
D. Brainstorm new ways to design materials.
Answer:
O
Explanation:
Because your product will not work well so people will not buy it and it could be a defect and explode
Answer:
c
Explanation:
the bouncing back of sound when it hits ahard surface is called
Answer:
Reflection of sound
Explanation:
Sound waves bounce back from hard surface's.
Do this for alot of points
1. A complete fitness and exercise program should incorporate three basic components: Endurance (Aerobic), Flexibility, and Strength. Each of these components has specific guidelines, which govern their effectiveness
1.
Which of the following best explains the
relationship between molecules and atoms?
A
Atoms are molecules that have a charge.
B
Atoms have smaller parts, called
molecules.
С
Molecules are made up of two or more
atoms.
D
Molecules are atoms that have no mass.
Answer:
С . Molecules are made up of two or more atoms.
Explanation:
The relationship between molecules and atoms is that molecules are made up of two or more atoms.
Molecules are made up of atoms.
A molecule is the smallest particle of a substance element or compound capable of independent existence.
A molecule could be monoatomic, diatomic or polyatomic.
Monoatomic molecules are made up of one atom
Diatomic are made up of two different atoms
Polyatomic substances are made up of more than two kinds of atoms.
A force of 60 N is applied to a skier to pull him along a horizontal surface so that his speed remains constant. If the coefficient of friction of the skis on snow is 0.05, then what is the weight of the skier?
Answer:
[tex]1200\ \text{N}[/tex]
Explanation:
F = Force on the skier = 60 N
[tex]\mu[/tex] = Coefficient of friction = 0.05
w = Weight of skier
Force is given by
[tex]F=\mu w[/tex]
[tex]\Rightarrow w=\dfrac{F}{\mu}[/tex]
[tex]\Rightarrow w=\dfrac{60}{0.05}=\dfrac{6000}{5}[/tex]
[tex]\Rightarrow w=1200\ \text{N}[/tex]
Weight of the skier on which the force is being applied is [tex]1200\ \text{N}[/tex] .
what does newton's first law describes
PLEASE ANSWER 50 points
A car manufacturer wants to change its car’s design to increase the car’s acceleration. Which changes should the engineers consider making to the design?
O increase the force that the engine provides
O decrease the force that the engine provides
O increase the mass of the car
O decrease the mass of the car
O increase the top velocity the car can travel
O decrease the top velocity the car can travel
6. What is the complete spectrum of all forms of light?
a. galaxy
b. electromagnetic spectrum
C. energy
d. system
Answer:
b. the electromagnetic spectrum
Explanation:
the electromagnetic spectrum contains all the forms of light, including gamma rays, x-rays, ultraviolet radiation, visible light, infrared, radio waves, microwaves, etc
A spring with a spring constant of 200 N/m stretches by 0.03 m. What is the potential energy of the spring?
Answer: 0.09 J
Explanation: K = 200 N/m , 1/2 X 200 N/m X (0.03 M)^2 = 0.09 J
What is the relationship among the potential drops across each resistor when the resistors are in series
Answer:
V = V₁ + V₂ + V₃ + ... + Vₙ
Explanation:
When the resistors are connected end to end such that there is only one path for the current to follow, it is called a series arrangement of resistors. In the series arrangement of the resistors, the current across each resistor is the same as the current applied across the circuit.
The potential difference across each resistor is different in the series arrangement of the resistors. But the sum of potential differences across each of the resistors in the series arrangement of resistors is equal to the total potential difference applied by the battery or source. Therefore, if n number of resistors are connected in a series arrangement with a source of potential V, the:
V = V₁ + V₂ + V₃ + ... + Vₙ
Explain why a bolt of lightning is like the spark you might see when you touch a metal object and get a shock.
Answer:
Just like lightning, the spark you see is the discharge of static electricity that equalizes the charges. When you touch a metal object and get a shock, electrons are travelling in between you and the object to equalize the charges of the two objects. The light that is seen is the plasma created by electrons jumping between objects which heats the air surrounding them.
3. Superman is flying on the sky, suddenly approaches an airplane. It is known that this airplane has 1,000,000 kg*m/s of momentum. Superman decides to push the airplane with a force of 1,200,000 N for .09 seconds. What is the impulse that superman gives to the plane? What is the new momentum of the airplane?
Answer:
Superman's delivered impulse : 108,000 kg m/s
New momentum of the airplane: 1,108,000 kg m/s
Explanation:
Recall that impulse can be estimated by multiplying the applied force times the duration of time the force was applied. Therefore, the impulse added by Superman was:
1,200,000 * 0.09 = 108,000 kg m/s
and then, the new momentum of the plane is the addition:
1000000 + 108000 = 1,108,000 kg m/s
a 4.0x 10^3 watt motor applies a force of 8.0 x 10^2 newtons to move a boat at constant speed. ow far does the boat move in 16 seconds
Answer:
80 m
Explanation:
From the question,
Power(P) = Force(F) × Velocity (V)
P = FV..................... Equation 1
V = P/F.................... Equation 2
Given: P = 4.0×10³ W, F = 8.0×10² N.
Substitute into equation 2
V = 4.0×10³/(8.0×10²)
V = 5 m/s.
Applying,
S = Vt............................ Equation 3
Where S = distance move by the boat, t = time.
Given: t = 16 s, V = 5 m/s
Substitute into equation 3
s = 16(5)
s = 80 m.
Hence the distance moved by the boat is 80 m
What happens to plankton during the spring bloom?Which organisms are consumers? (Select all that apply.) coyote, snail ,green algae, or bacteria
Answer:
See explanation
Explanation:
Plankton refers to the small and microscopic organisms drifting or floating in the sea or fresh water, consisting chiefly of diatoms, protozoans, small crustaceans, and the eggs and larval stages of larger animals(Oxford dictionary).
The spring bloom is a sudden growth or increase in plankton abundance. It begins around the early spring and continues until late in the spring or sometimes even early in the summer.
One organism that is a consumer of plankton are the snails. One of the commonest snails that eat plankton are the Nerite Snails.
A 15.0 kg bowling ball rolling at 3 m/s is stopped by a constant force of 11.2 newtons. Calculate the time the force must act on the bowling ball to stop it.
Answer:
4.01 seconds
Explanation:
Given that:
Mass of ball = 15kg
Initial velocity, u = 3m/s
Final velocity, v = 0
Force, F= 11.2 N
Change in velocity, dv = 3 - 0 = 3
Time force must act on the ball before stopping it:
Using the relation :
F = ma
a = (v - u) / t
Ft = m(v - u)
11.2 * t = 15 * 3
11.2t = 45
11.2t = 45
t = -+¯ 45 / 11.2
t = 4.01
t = 4 seconds.
Consider a space shuttle which has a mass of about 1.0 x 105 kg and circles the Earth at an altitude of about 200.0 km. Calculate the force of gravity that the space shuttle experiences
Answer:
1.6675×10^-16N
Explanation:
The force of gravity that the space shuttle experiences is expressed as;
g = GM/r²
G is the gravitational constant
M is the mass = 1.0 x 10^5 kg
r is the altitude = 200km = 200,000m
Substitute into the formula
g = 6.67×10^-11 × 1.0×10^5/(2×10^5)²
g = 6.67×10^-6/4×10^10
g = 1.6675×10^{-6-10}
g = 1.6675×10^-16N
Hence the force of gravity experienced by the shuttle is 1.6675×10^-16N
whitch two options are forms of kinetic energy?
Answer:the witch has nothing to do with the problem
Explanation:
electric heater carries a current of 18.0 A when operating at a voltage of 120 V. What is the resistance of the heater
Answer:
R = 6.67 ohms
Explanation:
Given that,
The current carried in the heater, I = 18 A
Voltage, V = 120 V
We need to find the resistance of the heater. Let the resistance be R.
We can use Ohm's law to find R.
V = IR
[tex]R=\dfrac{V}{I}\\\\R=\dfrac{120}{18}\\\\R=6.67\ \Omega[/tex]
So, the resistance of the heater is 6.67 ohms.
4.Jessica Diggins a US world champion cross country skier is participating in the winter Olympic games. Over a 200m stretch in her race she increases her speed with a constant acceleration from 5.1 m/s to 6.2 m/s over a period of 25 seconds. What is her acceleration
Answer:
[tex]a=0.044\ m/s^2[/tex]
Explanation:
Given that,
Initial speed, u = 5.1 m/s
Final speed, v = 6.2 m/s
Time, t = 25 s
We need to find acceleration. We know that,
acceleration = rate of change of velocity
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{6.2-5.1}{25}\\\\a=0.044\ m/s^2[/tex]
So, her acceleration is [tex]0.044\ m/s^2[/tex].
A small car with a mass of 800kg moving with a velocity of 27.8 m/s. The car stops at a yellow light in 3.9 seconds. What force did it take for the car to stop?
Answer:
F = 5702.56 N
Explanation:
Given that,
Mass of a small car, m = 800 kg
Initial speed of the car, u = 27.8 m/s
Final speed, v = 0
Time, t = 3.9 s
We need to find the force did it take for the car to stop.
The force acting on an object is given by :
[tex]F=ma\\\\F=\dfrac{m(v-u)}{t}\\\\F=\dfrac{800\times (0-27.8)}{3.9}\\\\F=-5702.56\ N[/tex]
So, the magnitude of force acting on the car to stop is 5702.56 N.
Find the power of a force F~ = (8 N)ˆı + (−4 N) ˆ if the velocity ~v = (−7 m/s)ˆı + (1 m/s) ˆ. Answer in units of W
Answer:
[tex]P=-60W[/tex]
Explanation:
From the question we are told that
Force of power [tex]F=8Ni+-4Nj[/tex]
Velocity of power [tex]V=-7m/si+1m/sj[/tex]
Generally the equation for power is mathematically represented as
[tex]Power=Force *Velocity[/tex]
[tex]P=F *V[/tex]
Generally the dot product of F and V is mathematically given as
[tex]P=[/tex] [tex]\begin{vmatrix}8 & -4\end{vmatrix} .[/tex][tex]\begin{vmatrix}-7 & 1\end{vmatrix}[/tex] [tex]=-56-4[/tex]
[tex]P=-60W[/tex]
Light with a wavelength of 560.0 nm is incident on a pair of slits with a separation of 0.380 mm. (a) Find the angles corresponding to the locations of the first three orders of bright fringes away from the central bright fringe
Answer:
Angles corresponding to the locations of the first three orders of bright fringes away from the central bright fringe are;
∅₁ = 0.8439°
∅₂ = 0.1688°
∅₃ = 0.2533°
Explanation:
Given that;
wavelength λ = 560 nm = 560 × 10⁻⁹
Separation between slits d = 0.380 mm = 0.00038
n = first three orders = 1st order, 2nd order and 3rd oder.
we know that for constructive interference;
λn = dsin∅
sin∅ = λn/d
∅ = sin⁻¹ ( λn/d )
where λ is wavelength, ∅ is the angle, d is the distance between slits, n is the order of constructive interference.
now;
-First order; n = 1
∅₁ = sin⁻¹(λn/d) = sin⁻¹( (560 × 10⁻⁹)×(1) /0.00038 )
∅₁ = sin⁻¹( 0.001473) = 0.8439°
-2nd order; n = 2
∅₂ = sin⁻¹(λn/d) = sin⁻¹( (560 × 10⁻⁹)×(2) /0.00038 ) =
∅₂ = sin⁻¹( 0.002947) = 0.1688°
-3rd order; n = 3
∅₃ = sin⁻¹(λn/d) = sin⁻¹( (560 × 10⁻⁹)×(3) /0.00038 ) =
∅₃ = sin⁻¹( 0.004421) = 0.2533°
Therefore, angles corresponding to the locations of the first three orders of bright fringes away from the central bright fringe are;
∅₁ = 0.8439°
∅₂ = 0.1688°
∅₃ = 0.2533°
