What occurs when the sequence of amino acids are linked by hydrogen bonds.

False. At a constant temperature, the pressure of a gas system is 24 kPa. If the volume of the gas system doubles, the new pressure will be not be equal to 12 kPa

According to Boyle's law, at constant temperature, the pressure and volume of a gas are inversely proportional to each other. This means that if the volume of a gas system doubles, the pressure will decrease by half, but not to exactly half of the original pressure.
The mathematical expression for Boyle's law is P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume. Using this equation, if the initial pressure is 24 kPa and the volume doubles, the final volume will be 2V1 and the final pressure will be P2 = P1V1/V2 = 24 kPa * 1/2 = 12 kPa. Therefore, the statement that the new pressure will be exactly 12 kPa is incorrect, as the pressure will decrease but not to exactly half of the original pressure.

To learn more about temperature, click here:
https://brainly.com/question/3521695

#SPJ11

The pH of the solution prepared by adding 0.001 mole of NaOCl to one liter of distilled water is 7.60.

the balanced equation for the dissociation of NaOCl in water:

NaOCl + H2O ⇌ Na+ + OH- + HOCl

Since we are neglecting ionic strength effects, we can assume that all the NaOCl dissociates into its ions. Therefore, we have:

[Na+] = 0.001 mol/L
[OH-] = [HOCl]

Now we can use the equilibrium constant expression for the dissociation of HOCl:

Ka = [H+][OCl-]/[HOCl]

Since we know the pKa for HOCl at 25 oC, we can calculate the Ka:

pKa = -log(Ka)
7.60 = -log(Ka)
Ka = 10^-7.60

Substituting the values we have into the equilibrium constant expression, we get:

10^-7.60 = [H+][0.001]/[HOCl]

Solving for [HOCl], we get:

[HOCl] = [H+] / 10^-7.60 / 0.001

Since [HOCl] = [OH-], we can substitute this into the equation:

[OH-] = [H+] / 10^-7.60 / 0.001

Taking the negative logarithm of both sides, we get:

pOH = pKw - pKa + log([Na+]/V)
pOH = 14.00 - 7.60 + log(0.001/1)
pOH = 6.40
pH = 14.00 - 6.40
pH = 7.60

Therefore, the pH of the solution prepared by adding 0.001 mole of NaOCl to one liter of distilled water is 7.60.

Learn more about pH

brainly.com/question/15289741

#SPJ11

The answer is (C) neutral.

When potassium chloride is dissolved in water, it dissociates into its constituent ions, K+ and Cl-. Neither of these ions reacts with water to produce H+ or OH- ions, which means the solution does not have any excess of either H+ or OH- ions.

When an ionic compound like potassium chloride is dissolved in water, it dissociates into its constituent ions, which become solvated by the water molecules. In the case of potassium chloride, it dissociates into potassium cations (K+) and chloride anions (Cl-). Since neither K+ nor Cl- can react with water to form H+ or OH- ions, the solution remains neutral.

To know more about potassium chloride, click here:-

https://brainly.com/question/22528097

#SPJ11

In lab organic solvent done add sodium wire and benzophenone to a volume of THF that has been pre-dried over calcium hydride or 4A molecular sieves.

Heat for several hours at reflux or under nitrogen until the solvent turns a deep blue color. This demonstrates the dissolvable is dry, and you can distil off the volume you require.

Last hints of water are eliminated by treating the natural arrangement with a drying specialist. A drying specialist is an inorganic salt which promptly takes up water to become hydrated. A few such salts are utilized regularly in the natural science educating labs: Agent for drying

The solution splits into three phases when an organic solvent and ammonium sulfate are added to a protein solution. Both the upper organic phase and the lower aqueous phase contain proteins that, depending on the concentration of ammonium sulfate, precipitate out and form an intermediate layer.

Learn more about Organic solvent :

brainly.com/question/9630611

#SPJ4

Shell eggs must be received at a maximum temperature of 45°F

The danger of bacterial growth rises when eggs are held above 45°F, which might result in the emergence of foodborne diseases. As a result, it's essential to make sure that shell eggs are delivered and kept at the proper temperature to reduce the danger of bacterial development and stop food poisoning. To ensure food safety, it's crucial to handle eggs carefully and cook them to the right temperature in addition to controlling temperature appropriately throughout storage and transit.

To learn more about temperature:

https://brainly.com/question/11464844

https://brainly.com/question/15267055

The reaction of a Grignard reagent with most aldehydes produces a primary alcohol, and the reaction of a Grignard reagent with a ketone produces a primary alcohol.

Ketone is an organic compound that contains a carbonyl group (a carbon atom double-bonded to an oxygen atom) and two hydrocarbon groups connected to the carbonyl group. Ketones are produced naturally in the body as a by-product of fat breakdown and are an important energy source. They can also be produced artificially through various industrial processes.

This is because Grignard reagents can add to aldehydes and ketones to form a new carbon-carbon bond, which results in a new carbon center with a single bond to an oxygen atom (the alcohol group). This new carbon-oxygen bond leads to a primary alcohol, as the oxygen atom is only attached to one other carbon atom.

Therefore the correct option is D.

To learn more about ketone

https://brainly.com/question/23849260

#SPJ4

A 5% decrease in the molarity of NaOH would decrease the moles of NaOH, making it the limiting reagent instead of HCl. The recalculated enthalpy would be larger than the original.

Molar concentration, also known as molarity, quantity concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume. The number of moles per litre, denoted by the unit sign mol/L or mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.

The total number of moles of solute in a particular solution's molarity is expressed as moles of solute per litre of solution. As opposed to mass, which fluctuates with changes in the system's physical circumstances, the volume of a solution depends on changes in the system's physical conditions, such as pressure and temperature. M, sometimes known as a molar, stands for molarity.

When one gramme of solute dissolves in one litre of solution, the solution has a molarity of one. Since the solvent and solute combine to form a solution in a solution, the total volume of the solution is measured.

Learn more about Molarity:

https://brainly.com/question/26528084

#SPJ4

The answer is: "C. re > ra > rd".  This represents the order of rates of reaction for the three steps involved in a typical reaction mechanism.

"re" refers to the rate-determining step, which is the slowest step in the reaction mechanism and therefore limits the overall rate of the reaction. "ra" and "rd" refer to the rates of the other steps in the reaction mechanism.  In general, the rate-determining step will have the slowest rate, followed by the other steps in order of decreasing rate.

Therefore, the general order of importance for the rate constants is re > ra > rd, and the correct answer is C. re > ra > rd.

To learn about reaction mechanism.:

https://brainly.com/question/14010810

#SPJ4

The structural isomers are isomers that have the same molecular formula but different arrangements of atoms. Among the given options, coordination isomers and geometric isomers are the structural isomers. Coordination isomers have the same composition of atoms but differ in the way the ligands are coordinated around the metal center.

Geometric isomers are also known as cis-trans isomers and differ in the orientation of ligands around a rigid bond, resulting in different physical and chemical properties.

Linkage isomers and optical isomers are not structural isomers. Linkage isomers are coordination compounds in which the ligand is attached to the central metal atom via a different atom, resulting in a different chemical behavior.

Optical isomers are stereoisomers that are non-superimposable mirror images of each other and have different optical activity. Therefore, the answer to the question is option (a) I, III as coordination isomers and geometric isomers are the structural isomers among the given options.

To know more about structural isomers, visit:

https://brainly.com/question/13422357#

#SPJ11

A.

category 4 & 5 hurricanes are predicted to have a positive percent change in number.

B)

Hurricanes are formed when warm, moist air from the ocean surface begins to rise rapidly, and they encounter cooler air that forces the warm water vapor to condense& form storm clouds with drops of rain.

C). It can be perceived from statistics  that hurricanes are getting stronger in this century.

D) Which areas are at the highest risk of hurricanes?

This information cannot be read off from this chart. It isn't provided.

E)

category 1 and category 2 & 3 hurricanes are the ones  predicted to drop in frequency by more than 25% this century.

F)

We can expect this century to be an increment by more than 75% higher than the previous century The number of category 4 and 5 hurricanes.

A hurricane is described as  a tropical storm with winds that have reached a constant speed of 74 miles per hour or more.

From the graph, the prediction shows a negative percent change in the number of category 1 and category 2 & 3 hurricanes  which are greater than -25% change and category 4 & 5 hurricanes get a positive percent change of more than +75% change.

Learn more about hurricanes at:

https://brainly.com/question/18221136

#SPJ1

Ksp (Solubility Product) is a form of equilibrium constant that is used to describe the equilibrium between a solid and its ions in a solution.

Ions are atoms or molecules which have become electrically charged by gaining or losing electrons. These charged particles are formed when neutral atoms or molecules interact with each other, such as when a metal reacts with a nonmetal.

It is calculated by multiplying the molar solubility of each ion raised to the power of its respective stoichiometric coefficient.

For example, for a generic salt AB with a molar solubility of x mol/L, Ksp is calculated as:

Ksp = (x)^(stoichiometric coefficient of A) * (x)^(stoichiometric coefficient of B)

For example, for a generic salt AB with a molar solubility of x mol/L and A having a stoichiometric coefficient of 2 and B having a stoichiometric coefficient of 3, Ksp is calculated as:

Ksp = (x)^2 * (x)^3 = x^5

To learn more about ions

https://brainly.com/question/30552973

#SPJ4

The solutes in the new solution are salt and alcohol. The original solution contained only salt as the solute, but when alcohol was added to it, it became a new solution with two solutes.

The concentration of salt in the new solution will still be 2%, but the concentration of alcohol will be much lower since only 5 ml was added to 65 ml of saltwater. It is important to note that alcohol is a volatile substance and can easily evaporate from the solution if left open to the air.

Therefore, the concentration of alcohol in the solution can decrease over time. Overall, the new solution is a mixture of saltwater and alcohol, and it is important to know the concentration of each solute for any specific application or use.

To know more about  solutes  visit:

brainly.com/question/30665317

#SPJ11

Alcohol is absorbed into the bloodstream through the stomach lining and it is also rapidly absorbed in the small intestine.

A human or other vertebrate's complete body is circulated by a system of organs called the blood circulatory system, which includes the heart, blood arteries, and blood itself. It contains the cardiovascular system, also known as the vascular system, which is made up of the heart and blood vessels (the words "blood vessels" and "heart" are derived from the Latin word "vascula," respectively). A systemic circulation or circuit and a pulmonary circulation or circuit are the two divisions of the circulatory system. The circulatory system is sometimes referred to as the cardiovascular system or vascular system.

big elastic arteries, big veins, other arteries, smaller arterioles, capillaries that connect to venules (small veins), and other veins make up the network of blood vessels that make up the vast vessels of the heart. In vertebrates, the circulatory system is closed, which implies that the blood never exits the system of blood vessels. Arthropods, for example, have an open circulatory system. Diploblasts without a circulatory system include sponges and comb jellies.

Learn more about Bloodstream:

https://brainly.com/question/30062142

#SPJ4

Bromophenyl blue is a pH indicator that changes color based on the acidity or alkalinity of a solution. In acidic solutions, it appears yellow, while in alkaline solutions, it turns blue.

Out of the given options, an ammonia solution will turn the bromophenyl blue indicator blue. This is because ammonia (NH3) reacts with water (H2O) to form ammonium hydroxide (NH4OH), which is a weak base. The presence of this weak base increases the pH of the solution, making it alkaline and causing the bromophenyl blue indicator to change to its blue form.
Copper oxide in water will not significantly affect the pH, as it has low solubility and does not produce a basic or acidic solution when mixed with water. Chlorine water is a solution of chlorine (Cl2) in water, which produces a slightly acidic solution due to the formation of hydrochloric acid (HCl) and hypochlorous acid (HOCl). Thus, it will not turn the indicator blue.
Lastly, carbon dioxide (CO2) dissolves in water to form carbonic acid (H2CO3), creating an acidic solution. This would turn the bromophenyl blue indicator yellow rather than blue.
In summary, an ammonia solution will turn the bromophenyl blue indicator blue due to its alkaline nature.

learn more about pH here

https://brainly.com/question/26775834

#SPJ11

The amount of iron (III) sulfate to produce is 143 grams.

To balance the equation FePO₄ + Na₂SO₄ → Fe₂(SO₄)₃ + Na₃PO₄.

The molar masses of each compound are:

FePO₄: 55.85 + 30.97 + 4(16) = 150.82 g/mol

Na₂SO₄: 2(23.00) + 32.07 + 4(16.00) = 142.04 g/mol

Fe₂(SO₄)₃: 2(55.85) + 3(32.07 + 4(16.00)) = 399.88 g/mol

Na₃PO₄: 3(22.99) + 1(30.97) + 4(16.00) = 163.94 g/mol

To determine the amount of iron (III) sulfate formed, use stoichiometry and the given masses of FePO₄ and Na₂SO₄.

First, find the limiting reagent by comparing the moles of each reactant. Using the molar masses above:

Moles of FePO₄ = 54 g / 150.82 g/mol = 0.358 mol

Moles of Na₂SO₄ = 75 g / 142.04 g/mol = 0.529 mol

FePO₄ is the limiting reagent since it produces fewer moles of product than Na₂SO₄.

The balanced equation shows that 1 mol of FePO₄ produces 1 mol of Fe₂(SO₄)₃, so:

0.358 mol FePO₄ × (1 mol Fe2(SO4)3 / 1 mol FePO₄) = 0.358 mol Fe₂(SO₄)₃

Finally, find the mass of Fe₂(SO₄)₃ produced using its molar mass:

Mass of Fe₂(SO₄)₃ = 0.358 mol × 399.88 g/mol = 143 g

Therefore, 143 grams of iron (III) sulfate can be made.

Find out more on balanced equation here: https://brainly.com/question/26694427

#SPJ1

The product of oxidizing 1-propanol with the shown structure is propanal.

1-propanol is a primary alcohol with the chemical formula C₃H₈O. When it undergoes oxidation with an oxidizing agent such as chromic acid or chromate, it loses two hydrogen atoms and gains an oxygen atom to form a carbonyl group.

In the case of 1-propanol, the carbonyl group forms at the second carbon atom, resulting in the formation of propanal. The balanced chemical equation for this reaction is:

CH₃CH₂CH₂OH + [O] → CH₃CH₂CHO + H₂O

where [O] represents the oxidizing agent. Therefore, propanal is the product of oxidizing 1-propanol.

To know more about the Oxidized, here

https://brainly.com/question/20595592

#SPJ4

False, Origin science is a branch of science that focuses on the origins and history of the universe, Earth, and life on Earth. It deals with the study of the beginning of things and the processes that led to their current state, but it does not necessarily focus on cause and effect relationships.

True. Origin science seeks to understand the cause and effect relationships that led to the origin and development of the universe, life, and other phenomena. It uses empirical evidence and scientific methods to make testable hypotheses and predictions about the origins of these phenomena.

To know more about Origin science click here:

brainly.com/question/28368991

#SPJ11

1680 kJ energy is required to decompose 765 g of PCl3, according to 4PCl3(g) → P4(s) + 6Cl2(g) ΔH = 1207 kJ

The molar mass of PCl3 is 137.33 g/mol, so 765 g corresponds to:

n = m/M = 765 g / 137.33 g/mol = 5.572 mol PCl3

According to the balanced equation, 4 moles of PCl3 decompose to release 1207 kJ of energy. Therefore, the amount of energy required to decompose 5.572 mol of PCl3 is:

(5.572 mol PCl3) x (1207 kJ / 4 mol PCl3) = 1682.2 kJ

Rounding to three significant figures, the answer is 1680 kJ (option a).

To know more about PCl3, click here:

https://brainly.com/question/29198355

#SPJ11

Out of the given options, the substance that is not a base is CuCO3, which is copper carbonate. CuCO3 is a compound that is formed from the reaction between copper(II) ions and carbonate ions. It is a blue-green solid that is insoluble in water and has no basic properties.

On the other hand, NaOH (sodium hydroxide) and CuO (copper oxide) are strong bases that dissociate completely in water to produce hydroxide ions (OH-) that can neutralize acids. NaHCO3 (sodium bicarbonate) is a weak base that can act as a buffer and help regulate pH in the body.
NaCl (sodium chloride) is not a base, but rather a salt that is formed from the reaction between an acid (HCl) and a base (NaOH). It is a neutral compound that does not affect the pH of a solution.
In conclusion, CuCO3 is not a base, while NaOH, CuO, and NaHCO3 are all bases of varying strengths.

learn more about reaction here

https://brainly.com/question/18383232

#SPJ11

The gravimetric analysis of the mixture is 37.0% N₂ and 63.0% CO₂. The molar mass of the mixture is 0.3629 g/mol, and the gas constant is 22.89 kJ/kg-K.

The gravimetric analysis of a gas mixture is the determination of its composition based on the weights of its components. In this case, we know that the gas mixture contains 48% nitrogen (N₂) and 52% carbon dioxide (CO₂) on a mole basis.

To determine the gravimetric analysis of the mixture, we need to calculate the mass of each component. Assuming we have 100 moles of the mixture, we have 48 moles of N₂ and 52 moles of CO₂.

The molar mass of N₂ is 28.02 g/mol and the molar mass of CO₂ is 44.01 g/mol. Therefore, the mass of N₂ in the mixture is (48/100) × 28.02 g = 13.45 g, and the mass of CO₂ in the mixture is (52/100) × 44.01 g = 22.88 g.

The total mass of the mixture is the sum of the masses of N₂ and CO₂, which is 13.45 g + 22.88 g = 36.33 g.

The molar mass of the mixture is the total mass divided by the total number of moles:

Molar mass = (13.45 g + 22.88 g) / 100 mol = 0.3629 g/mol.

Finally, the gas constant can be calculated using the universal gas constant and the molar mass:

R = Ru / M = 8.314 kJ/kmol-K / 0.3629 g/mol = 22.89 kJ/kg-K.

To know more about gas constant, refer here:

https://brainly.com/question/14279790#

#SPJ11

The answer to the question is that the daughter nucleus will have 96 protons and 245 nucleons.

We first need to understand what happens during alpha decay. Alpha decay is a type of radioactive decay in which an atom emits an alpha particle, which is a helium nucleus consisting of two protons and two neutrons. This process reduces the atomic number by 2 and the mass number by 4.

In the given scenario, the original atom has 98 protons and 249 nucleons. When it undergoes alpha decay, it emits an alpha particle, which means it loses two protons and two neutrons. Therefore, the number of protons in the daughter nucleus will be 98 - 2 = 96. Similarly, the number of nucleons will be 249 - 4 = 245.

To summarize, alpha decay results in the emission of an alpha particle, leading to a reduction of two protons and four nucleons. In this case, the daughter nucleus will have 96 protons and 245 nucleons.

To learn more about alpha decay visit:

brainly.com/question/27870937

#SPJ11

Oil baths are commonly used in laboratories as a method of heating or maintaining the temperature of samples. However, they come with several inconveniences that can be frustrating and time-consuming to deal with. One of the main issues with oil baths is the mess they create.

Since oil is a liquid, it can easily spill or splash onto surfaces, creating a slippery and potentially dangerous environment. Cleaning up spilled oil can be time-consuming and may require special equipment or solvents.

Another inconvenience with oil baths is the need to constantly monitor the temperature to ensure it remains stable. Since oil heats up relatively slowly, it can take longer to reach the desired temperature, and fluctuations in temperature can be common. This can be particularly frustrating when working with sensitive samples that require a precise temperature range.

Additionally, oil baths require regular maintenance to ensure the oil remains clean and free from contamination. If not properly maintained, the oil can become rancid, which can impact the accuracy of experiments and even damage equipment. Overall, while oil baths can be a useful tool in the laboratory, they require careful management and attention to avoid inconveniences and potential hazards.

To know more about Laboratories click this link-

brainly.com/question/30753305

#SPJ11

Answer: alteration in the charge of the molecule

Exactly 50% of the data is greater than the first quartile in a box-and-whisker plot.

The first quartile represents the value below which 25% of the data falls. This means that the remaining 75% of the data falls above the first quartile. Since the box-and-whisker plot splits the data into equal quarters, the second quartile represents the median, which also has 50% of the data above it. Therefore, the remaining 25% of the data falls between the first and second quartile.

Thus, understanding the quartiles in a box-and-whisker plot allows us to determine the proportion of data that falls above or below a certain value. In this case, we can conclude that 50% of the data is greater than the first quartile.

To know more about box-and-whisker plot, click here

https://brainly.com/question/15372634

#SPJ11

The w/w percent composition of the solution is 14.0%, meaning that 14.0% of the total weight of the solution is glucose.

The w/w percent composition of a solution is the weight of the solute divided by the total weight of the solution, expressed as a percentage. In this case, the solute is glucose and the solvent is water. To calculate the w/w percent composition, we need to determine the total weight of the solution. This can be found by adding the weight of the glucose (5.40 g) to the weight of the water (33.2 g), which gives a total weight of 38.6 g.

Next, we can calculate the weight percent of glucose in the solution by dividing the weight of glucose by the total weight of the solution and multiplying by 100:
(5.40 g glucose / 38.6 g solution) x 100% = 14.0% w/w

Therefore, the w/w percent composition of the solution is 14.0%, meaning that 14.0% of the total weight of the solution is glucose.

Learn more about glucose here:

https://brainly.com/question/30548064

#SPJ11

The oxidation number of manganese in KMnO4 is +7.

In KMnO4, the compound consists of a potassium ion (K+), a manganese ion (Mn), and four oxygen ions (O2-). The oxidation number of potassium (K) is +1, and the oxidation number of oxygen (O) is -2. To find the oxidation number of manganese (Mn), we can use the following equation:

(K Oxidation Number) + (Mn Oxidation Number) + 4*(O Oxidation Number) = 0

(+1) + (Mn Oxidation Number) + 4*(-2) = 0

Solving for the Mn Oxidation Number, we get:

Mn Oxidation Number = +7

Thus, the sum of the oxidation numbers of all the atoms must equal zero, leading to the oxidation number of manganese being +7.

To know more about oxidation number, click here

https://brainly.com/question/29257381

#SPJ11

Hydrogen ions (H+) are physically closer to the oxygen of water molecules that surround it in a solution.

This is because water is a polar molecule, meaning that it has a partially positive end (the hydrogen end) and a partially negative end (the oxygen end). When an acid is dissolved in water, it donates a hydrogen ion (H+) to the water, which becomes surrounded by water molecules with their negatively charged oxygen atoms facing the H+. This creates a shell of water molecules around the H+ ion, with the oxygen atoms physically closer to the H+ than the hydrogen atoms.

Water molecules are physically closer to the oxygen atom than the hydrogen atoms in a solution. This is because oxygen has a stronger electronegativity compared to hydrogen, causing the oxygen atom to pull the electrons in the covalent bond towards itself, creating a partial negative charge (δ-) on the oxygen atom and a partial positive charge (δ+) on each of the hydrogen atoms. As a result, water molecules tend to orient themselves around the positively charged ions in a solution, with the oxygen atoms facing the cation and the hydrogen atoms facing the anion. This process is known as hydration, and it plays a crucial role in various chemical and biological processes in aqueous solutions.

To know more about Hydrogen ions (H+), please click on:

https://brainly.com/question/16480786

#SPJ11

The half life of the decay of the radioactive nuclide is 231 hours.

The half-life of a nuclei is the time it takes for half of the radioactive atoms in a sample to decay. It is a characteristic property of a particular radioactive substance and is independent of the initial amount of the substance.

By the use of the formula;

t1/2 = ln2/k

Where;

t1/2 = half life

k = rate constant

Thus we have that;

t1/2= ln2/3.0 * 10^-3

t1/2 = 231 hours

Thus the half life 231 hours

Learn more about half life:https://brainly.com/question/24710827

#SPJ1

Concentration to calculate the mass of NH₄Cl that must be added 5.08 g

Mass is a physical property of matter, referring to the measure of the amount of matter an object contains. It is measured by the amount of force required to accelerate a given object. Mass is a scalar quantity, meaning that it has a magnitude but no direction.

The first step is to calculate the concentration of NH₃ in the solution. This is done by multiplying the molarity of the solution (0.100 M) by the volume of the solution (0.750 L):
[NH₃] = 0.100 M × 0.750 L = 0.075 M
Next, we need to calculate the concentration of NH4+ in the solution. This can be done by using the Henderson-Hasselbalch equation:
pH = pKa + log([NH⁴⁺]/[NH₃])
Rearranging this equation gives:
[NH⁴⁺]/[NH₃] = [tex]10^{(pH - pKa)[/tex] Substituting in the known values gives:
[NH⁴⁺]/[NH₃] =[tex]10^{(9.26 - (-5.56))[/tex] = [tex]10^{14.82[/tex] = 1.27 x 10¹⁴
Now we can calculate the concentration of NH⁴⁺ in the solution:
[NH⁴⁺ = 1.27 x 10¹⁴ × 0.075 M = 9.52 x 10¹³ M
Finally, we can use this concentration to calculate the mass of NH₄Cl that must be added:
Mass = [NH⁴⁺] × molar mass NH₄Cl
Mass = 9.52 x 10¹³ M × 53.49 g/mol = 5.08 g

To learn more about Mass      

https://brainly.com/question/30459977

#SPJ4

The substances that will exhibit hydrogen bonds is option A which says ethanol.

The hydrogen bonding means hydrogen bonds with the following elements: N, O, and F. (NOF)

In trimethylamine, as we can see, the hydrogens will bond on to all the carbons while the carbons complete their octet with the nitrogen.

In the case of dimethyl ether, you have:

Again. NO hydrogens have bonded onto the oxygen.  thus, this is not the correct option.

In ethanol, there exhibit hydrogen bonding from the hydroxide ion at the end - OH.

Thus, the correct option is A.

To learn more about hydrogen bonds check the link below-

https://brainly.com/question/1426421

#SPJ4