what physical or chemical properties were the defining ones to identify the three unknowns? for example, was the odor the most obvious? the flammability?

10.54L of NH3 at 850°C and 5.00 atm are required to react with 1.00 mole of O2 in this reaction.

Given the temperature of NH3 = 850°C = 850 + 273 = 1123K

The pressure of NH3 = 5atm

Number of moles of O2 = 1

The volume of NH3 = V

The reaction equation is:

[tex]4NH3 + 7O2 --- > 4NO2 + 6H2O[/tex]

4 moles of ammonia and 7 moles of oxygen gas react.

1 mole of oxygen gas and 1 mole of ammonia react.

Ammonia is equal to 0.5714 moles.

From the equation of ideal gas law: PV = nRT where R = 0.0821 L atm/ K mol which is a gas constant such that:

[tex]5.00 atm * V = 0.5714 moles * 0.0821 L atm/ K mol * 1123K[/tex]  

V = 10.54 L

To learn more about NH3 click here https://brainly.com/question/16119085

#SPJ4

complete question: In the first step of the industrial process for making nitric acid, ammonia reacts with oxygen in the presence of a suitable catalyst to form nitric oxide and water vapor: 4NH3 + 7O2 -> 4NO2 + 6H2O. How many liters of NH3 at 850 °C and 5.00 atm are required to react with 1.00 mol of O2 in this reaction?

Penguin's average velocity is  c)0.5m/sec if it is initial at 4m and switches to 8m position in 8 sec.So,correct option is c.

The word average essentially implies, the proportion of the amount of amounts to the absolute number of amounts. In Material science, an alternate methodology is taken. Presently prior to understanding normal speed, let us comprehend what speed precisely and speed is and the way in which these two are associated.

The speed of an item alludes to the adjustment of position of that article concerning time. Speed then again isn't anything, however the speed characterized concerning the course in which an item voyages.We will jump into insight regarding the contrast among speed and speed, until further notice, how about we return to the typical speed.

Presently average velocity as indicated by the definition is the proportion of the distance from point a to guide b of an article toward the time it takes to make that removal from point a to point b. It could be noticed that we utilize the term development rather than distance to stress the course.

Arithmetically and average velocity is characterized as, v = d /t,where d is the distance or displacement and t is the time taken for that removal.

Initially,penguin is at 4m position and in 8 sec it reaches to 8m position.So,distance covered by penguin in 8 sec=8m-4m=4m

So,average velocity=4m/8sec=0.5m/sec.

Hence,option c is correct.

To know more about average velocity,visit here:

https://brainly.com/question/18153640

#SPJ4

(Complete question) is:

Examine the information.A Magellanic penguin is at an initial position of 4 m and waddles to a position of 8 m in 8 s.

What is the penguin’s average velocity?

a)-4 m/s

b)4 m/s

c)0. 5 m/s

d)2 m/s

The movement of a substance from a low concentration to a high concentration will require an input of energy in the form of heat or another form of energy.

This is because the movement of a substance from a low concentration to a high concentration is driven by the laws of thermodynamics, which state that energy flows from high concentration to low concentration, and not the other way around.

In a concentration gradient, particles tend to move from areas of high concentration to areas of low concentration, in a process known as diffusion. However, for this movement to occur spontaneously, the concentration gradient must be established, meaning that there must be a difference in concentration between the two areas.

To move a substance from a low concentration to a high concentration, energy must be supplied to the system to overcome the natural tendency for energy to flow from high to low concentration. This energy can be supplied in the form of heat, work, or other forms of energy, and it is used to move the particles against the concentration gradient, from a low concentration to a high concentration.

In conclusion, the movement of a substance from a low concentration to a high concentration requires an input of energy in the form of heat or another form of energy, to overcome the natural tendency for energy to flow from high to low concentration

Learn more about concentration here:

https://brainly.com/question/13872928

#SPJ4

Answer:

+3

Explanation:

The anion in aluminum nitrate is nitrate (NO3-), which has a valency of -1. The cation in aluminum nitrate is aluminum (Al^3+), which has a valency of +3.


ALLEN

Yes, an element in the activity series can replace only an element placed below it.

When we look at the activity series, we can observe that nickel is positioned above lead but below iron. As a result, while iron cannot be replaced by nickel metal, lead can be replaced by it in a reaction. Thus, an element can replace another element placed below it in the activity series.

Only when the element being replaced is more reactive than the other element, single-replacement reactions take place. Consequently, having a list of the elements arranged according to their relative reactivity is helpful. The elements in the activity series are listed in decreasing order of how reactive they are.

Metals and nonmetals each have their own activity series because metals replace other metals while nonmetals replace other nonmetals.

To know more about activity series, refer:

https://brainly.com/question/19482695

#SPJ4

A workplace label typically contains information about the product name, manufacturer, safety instructions, and hazard warnings. It may also include instructions for proper use, storage, and disposal of the product.

 The manufacturer is the company or individual responsible for producing a product. They are responsible for the design, production, and distribution of the item. The manufacturer typically owns the production line, labor, and materials used to create the product. This includes the factory, the machinery, and the raw materials used to make the product. The manufacturer is also responsible for creating a brand identity, and for marketing and promoting the product. This includes advertising, creating a website and social media presence, and engaging in public relations activities.

To learn more about manufacturer

https://brainly.com/question/30561781

#SPJ1

A saturated solution this is an indication that the solution.

A saturated solution is a solution which contains the maximum amount of solute that can be dissolved in a given amount of solvent. If there is still undissolved solid on the bottom of the flask after the student has mixed the NaCl and H2O, then this indicates that the solution is saturated, as all of the solute that can be dissolved has been dissolved.A very saturated solution is created by repeatedly adding solute to a solution up until a point when the solute manifests as a solid precipitate or crystals.

learn more about saturated solution Refer:brainly.com/question/1851822

#SPJ4

complete question:While working in the lab, a student prepares a solution by mixing NaCl and H2O in a flask. After adding the salt and mixing, the student notices that there is some undissolved solid on the bottom of the flask. This is an indication that the solution is:

A.a saturated solution.

B.a concentrated solution.

C.an unsaturated solution.

D.a supersaturated solution.

An atom is made up of a nucleus containing protons and neutrons surrounded by a cloud of electrons.

Protons and neutrons are collectively known as nucleons and together they make up the nucleus. Electrons orbit the nucleus at different energy levels.Defibrillation is a medical procedure that delivers a therapeutic dose of electrical energy to the heart muscle in order to restore a normal heart rhythm. This electrical energy is delivered by a device called a defibrillator. A glossary is a collection of terms and definitions, usually in alphabetical order, providing an explanation of a specific subject or topic.A glossary is an alphabetically organized list of words and definitions related to a specific topic. It provides an easy reference for understanding the language used in that subject.

learn more about Electrons refer:brainly.com/question/28977387

#SPJ4

Since many organic solvents are volatile, vapors will accumulate during mixing and raise the container's internal pressure. In order to release this pressure, it is necessary to frequently vent the mixing container.

As gas particles collide with the wall of their container, a force known as "gas pressure" is generated. Force is used to apply pressure to a region. Gas pressure is the force a gas applies to a certain location. As a result, the gas pressure of a gas is calculated by dividing the total surface area of the container walls by the sum of the forces the gas molecules exert on the walls of their container.

Learn more about organic solvents here:

https://brainly.com/question/28850026

#SPJ4

The process of separating Na+ and Cl- against coulomb attractive force is :

Endothermic.

This is because it takes energy to counteract the attraction between the oppositely charged ions while separating Na+ and Cl- ions against Coulomb attractive force. The amount of energy needed to separate the ions is dictated by the intensity of their attraction, which is determined by the size of their charges and the distance between them. The greater the charge and the closer the ions, the greater the amount of energy necessary to separate them.

An endothermic process is one that absorbs energy in the form of heat. This sort of reaction requires an energy input, generally in the form of heat, to proceed. Endothermic processes include the combustion of fuels, the dissolution of salts, and the neutralisation of acids and bases.

For more such questions on  endothermic process, click on:

https://brainly.com/question/10361961

#SPJ4

A process whereby a compound is broken down into two or more simpler compounds. Reaction of displacement.

Decomposition reactions: the breaking down of a chemical molecule into less complex elements. These reactions work in opposition to synthesis reactions. Breaking down a highly complex chemical into two or more simpler substances is known as a decomposition reaction. The formula for this reaction is frequently written as AB A + B or C A + B. Everywhere, decomposition reactions take place. Reactions involving decomposition - A reaction in which a single component disintegrates, or decomposes, into two or more simpler substances. One illustration is the electrolysis of water, which occurs when an electric current is carried across it and produces hydrogen and oxygen gas.

Learn more about reaction of displacement here:

https://brainly.com/question/29307794

#SPJ4

If we use 1.6 ml of pure ethyl acetate instead of a mixture of 0.8 ml of ethyl acetate and 0.8 ml of hexane as the reaction solvent, means that the reaction would take place in a more polar solvent than otherwise.

Ethyl acetate is a more polar solvent than hexane. Since the experiment calls for a Craig tube, we know that crystallization is an important component of the experiment.

This process is highly sensitive to the polarity difference between the solute (reaction product) and solvent. Therefore, we would expect more difficulty completing the experiment's crystallisation step when pure ethyl acetate is used as the solvent.

To learn more about polar solvent,

brainly.com/question/3184550

#SP J4

A possible hypothesis on the observable products indicating that the reaction has gone to completion could be:

A double-replacement reaction is a type of chemical reaction that occurs between two ionic compounds in which the cations and anions of the two compounds switch partners to form two new ionic compounds.

In other words, the cations of one compound exchange places with the anions of the other compound. The general form of a double-replacement reaction can be written as AB + CD -> AD + CB, where A and B are the cations of the two original compounds and C and D are the anions of the two original compounds.

Learn more on double-replacement reaction here: https://brainly.com/question/23918356

#SPJ1

Oxygen and carbon, as well as other elements, have different specific heat capacities. Specific heat capacity, also known as specific heat, is the amount of energy required to increase the temperature of a substance by a certain amount.

The specific heat of a substance depends on its physical and chemical properties, such as its atomic structure, mass, and intermolecular forces. Different elements have different properties, which lead to differences in their specific heats.

For example, water has a high specific heat capacity compared to many other substances, which is why it is often used to regulate temperature in industrial processes and in nature. This means that it takes a relatively large amount of energy to increase the temperature of water by a given amount. In contrast, metals like copper have low specific heat capacities, which means that it takes much less energy to increase their temperature by the same amount.

In terms of the human body, the specific heat capacity of different tissues and organs is important for regulating body temperature. For example, the brain and the liver have high specific heat capacities, which helps to protect them from rapid temperature changes. In contrast, bone has a lower specific heat capacity, which makes it more susceptible to temperature changes.

Overall, the specific heat capacity of different elements and substances is an important physical property that has a significant impact on the behavior of matter. It is a fundamental property of materials that is essential for understanding and predicting the behavior of systems in the physical and natural sciences, including the human body.

To know more about specific heat: https://brainly.com/question/11297584

#SPJ4

The given statement "enzymes are consumed in chemical reactions and cannot be used again" is false because the enzymes are not consumed during the chemical reaction.

The Enzymes are not the reactants and enzymes are not used up during the chemical reaction. Once the will enzyme binds to the substrate and enzymes will catalyzes the chemical reaction, the enzyme will released, and unchanged, and can be used for the another reaction. Enzymes are helpful in speed up the chemical reaction.

The enzyme is the biological catalyst and is is the protein. It is used to speeds up the rate of the  specific chemical reaction in the cell.

To learn more about enzymes here

https://brainly.com/question/15207140

#SPJ4

100 ml of substance b has the same mass as 50.0 ml of substance a.

To solve this problem, we need to use the formula:

density = mass/volume

We can rearrange this formula to solve for mass:

mass = density x volume

We can then use the masses of the two substances to find the volume of substance b that has the same mass as 50.0 ml of substance a.

First, let's find the mass of 50.0 ml of substance a:

mass of substance a = density of substance a x volume of substance a

= 2.20 g/ml x 50.0 ml

= 110 g

Next, let's find the volume of substance b that has the same mass as 50.0 ml of substance a by equating:

mass of substance b = mass of substance a

density of substance b x volume of substance b = density of substance a x volume of substance a

volume of substance b = (density of substance a x volume of substance a) / density of substance b

= (2.20 g/ml x 50.0 ml) / 1.10 g/ml

= 100 ml

Therefore, 100 ml of substance b has the same mass as 50.0 ml of substance a.

For similar question on mass of substance,

https://brainly.com/question/21334167

#SPJ4

Explanation:

The correct statement that best explains the trend in the acid strength of the oxyacids of chlorine is (A). The electrons in the H-O bond are pulled away from the hydrogen by the more electronegative oxygen, making the bond weaker. Additional oxygen atoms intensify this effect, making the H-O bond even weaker and increasing the degree of ionization. The trend in acid strength is due to the increasing electronegativity of oxygen and the corresponding weakening of the H-O bond in the acid.

To compute the number of formula units in 5.50 grams of AgNO3, first calculate the molar mass of the compound, which is the sum of the atomic masses of silver (Ag), nitrogen (N), and oxygen.

(O). Molar mass of AgNO3 = (1 x Ag atomic mass) + (1 x N atomic mass) + (3 x O atomic mass) The molar mass of AgNO3 is equal to (1 x 107.87 g/mol) + (1 x 14.01 g/mol) + (3 x 16.00 g/mol). The molar mass of AgNO3 is 169.87 g/mol. Therefore, using the molar mass, we can convert the mass of AgNO3 to moles of AgNO3: moles AgNO3 = AgNO3 mass / AgNO3 molar mass moles AgNO3 = 5.50 g / 169.87 g/mol moles AgNO3 = 0.0324 mol Lastly, we may employ Avogadro's number, 6.022 x To convert moles of AgNO3 to formula units, multiply by 1023: formula units = moles AgNO3 x Avogadro's number formula units = 0.0324 mol x 6.022 x 1023 formula units/mol formula units = 1.95 x 1022 formula units/mol formula units = 1.95 x 1022 formula units As a result, 5.50 grams of AgNO3 contains roughly 1.95 x 1022 formula units.

learn more about  AgNO3  here:

https://brainly.com/question/22263346

#SPJ4

Answer:

Explanation:

In this scenario, the house can be considered as a thermodynamic system, and the transfer of energy between the system and its surroundings occurs through heat transfer.

On a hot day, the temperature inside the house is higher than the temperature outside, causing heat to flow from the house to the environment in order to balance the temperatures. This heat transfer occurs due to the difference in temperature between the house and the outside environment, and is facilitated by the air conditioning system.

The air conditioning system works by removing heat from inside the house and expelling it to the outside environment, thus cooling the air inside the house. This process of removing heat from the house and expelling it to the outside is a transfer of energy from the system (the house) to its surroundings.

The heat transfer from the house to the outside environment continues until the temperature inside the house reaches a state of thermal equilibrium with the temperature outside, at which point the transfer of heat stops. The air conditioning system continues to operate, however, to maintain the desired temperature inside the house by continuously removing heat and expelling it to the outside environment.

In summary, the transfer of energy between the house (the system) and its surroundings occurs through heat transfer, with heat flowing from the house to the outside environment due to the difference in temperature, and the air conditioning system facilitating this transfer by removing heat from inside the house and expelling it to the outside environment.

Answer:

154.61 g.

Explanation:

he balanced chemical equation for the reaction of KCIO3 to form KCl and O2 is:

2KCIO3 -> 2KCl + 3O2

From this equation, we can see that for every 1 mole of KCIO3, 2 moles of KCl and 3 moles of O2 are produced.

First, we need to calculate the number of moles of KCIO3:

n = mass / molar mass

= 125g / (138.2 g/mol)

= 0.902 moles

Now that we have the number of moles of KCIO3, we can calculate the masses of the products:

Mass of KCl = 0.902 moles * (74.55 g/mol) = 67.53 g

Mass of O2 = 0.902 moles * (32.00 g/mol) * 3 = 87.08 g

So the total mass of the products will be:

67.53 g + 87.08 g = 154.61 g.


ALLEN

The drop of RBCs placed in the 300 millimolar solution of CaCl2 would cause the RBCs to shrink. The answer is A) The RBCs would shrink.

This is because the solution is hypertonic, meaning it has a higher solute concentration than the RBCs. As a result, water will move out of the RBCs to try to equalize the concentration of solutes on both sides of the membrane. This will cause the RBCs to shrink in size as they lose water. The Ca2+ ions in the solution can also interact with the negatively charged phospholipid heads in the RBC membrane, causing the membrane to become more rigid and less flexible, further contributing to the shrinkage of the RBCs.

To learn more about hypertonic Click here:

brainly.com/question/13886457

#SPJ4

We must first determine the formula mass of a Cu2O formula unit before we can set it on the nano-balance. As a result, we must increase the greater balance by one formula unit of H2O.

We must first determine the formula mass of a Cu2O formula unit before we can set it on the nano-balance. Since there are two copper atoms and one oxygen atom in every unit of the formula Cu2O, we may determine its mass as follows: Cu2O has a formula mass of 143.1 u, which is equal to 2 atomic masses of copper and 1 atomic mass of oxygen. 0.000 u x 143.1 u/formula unit = 0 formula units is the amount we must increase. The mass of water is expressed as: H2O's formula mass is (2 x hydrogen atomic mass) + (1 x oxygen atomic mass), which equals (2 x 1.008 u) + (1 x 15.999 u) = 18.015 u. The following must be added: 0.000 u; 18.015 u; and 0.000 formula units.

Learn more about Cu2O here:

https://brainly.com/question/23602265

#SPJ4

When there is competition between the inductive effect and resonance effect, the resonance effect is generally more dominant in determining the electronic properties of a molecule.

This is because resonance allows for the delocalization of electrons, resulting in more stable molecules and enhanced reactivity.

The resonance effect is a chemical phenomenon in which electrons are delocalized through a system of adjacent atoms with conjugated pi bonds. This delocalization leads to the stabilization of the molecule, which can affect its reactivity and electronic properties. The resonance effect is typically observed in organic molecules with alternating double and single bonds, or in molecules with adjacent atoms with lone pairs. The delocalization of electrons through resonance can lead to a variety of interesting effects, including increased acidity or basicity, altered reactivity patterns, and changes in molecular orbital energies. The resonance effect is an important concept in many areas of chemistry, including organic synthesis, biochemistry, and materials science, and is often used to explain and predict the behavior of complex molecules.

Learn more about resonance effect here:

https://brainly.com/question/30490931

#SPJ4

[A]t versus t gives first order reaction, ln[A]t versus t gives second order reaction and 1/[A]t versus t  gives third order reaction.

The order of reaction has been defined as the rate's power dependency on reactant concentration. That once rate law of something like a reaction has been identified, the same rule may be utilized to fully comprehend the content of the reaction mixture.

In plenty of other words, this reaction order is indeed the exponent through which the concentration of a given species is increased, and it indicates how the concentrations of the species impacts the rate of reaction.

[A]t versus t gives first order reaction

ln[A]t versus t gives second order reaction

1/[A]t versus t  gives third order reaction

Therefore, [A]t versus t gives first order reaction, ln[A]t versus t gives second order reaction and 1/[A]t versus t  gives third order reaction.

To learn more about order of the reaction, here:

https://brainly.com/question/1769080

#SPJ9

The density of pure iron is 7.874 g/cm³. The mass in grams of a piece of iron with a volume of 20.00 cm³ is 157.48 g.

The density of the pure iron = 7.874 g/cm³

The volume of the iron = 20.00 cm³

The expression for density is as :

Density = mass / volume

Mass = density × volume

Where

Density = 7.874 g/cm³

Volume = 20.00 cm³

Mass = 7.874 g/cm³ × 20.00 cm³

Mass = 157.48 g

Thus, the mass of the piece of the iron is 157.48 with the volume of the iron is 20.00 cm³ .

To learn more about density here

https://brainly.com/question/30635626

#SPJ4

The amount of the Br₂ in moles was formed during the first 15.0 s of the reaction is 0.0396 mol.

The rection is as :

2HBr  --->   H₂  +  Br₂

The rate of disappearance of HBr = - (1/2) d[HBr] / dt

The rate of formation of H₂  = + (1/ 2 )d [H₂ ] / dt

The rate of formation of  Br₂ = + (1/2) [  Br₂] / dt

Average rate = - (1/2) d[HBr] / dt

                       = - (1/2) ( 0.512 - 0.600 ) / (25 - 0 )

                       = 0.00176 M/s

d[ Br₂] / dt = 0.00176 M/s

[ Br₂]  = 0.0264 M

The moles of  Br₂ = 0.0264 × 1.25

                              = 0.0396 mol

This question is incomplete, the complete question is :

Consider the reaction. 2 HBr(g) ¡ H2(g) + Br2(g) a. Express the rate of the reaction in terms of the change in concentration of each of the reactants and products. b. In the first 25.0 s of this reaction, the concentration of HBr drops from 0.600 M to 0.512 M. Calculate the average rate of the reaction during this time interval.c. If the volume of the reaction vessel in part b is 1.50 L, what amount of Br2 (in moles) forms during the first 15.0 s of the reaction?

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

If you decide mineral D was the softest mineral of this group  you would place it on line are ;G ___1___, A ___2___, B ___3___, E ___4___, F ___5___, C ___6___,D ___7___.

Mineral is an inorganic naturally occurring substance formed through geological processes that has a characteristic chemical composition, a highly ordered atomic structure, and specific physical properties. Minerals are not created by living organisms and are not biodegradable. There are over 4,000 known minerals on Earth, with new ones being discovered every day. They can be found in rocks, soils, and even in bodies of water. Minerals can be divided into two main categories: metallic and non-metallic. Metallic minerals are characterized by their shiny appearance, while non-metallic minerals are dull in appearance.

To learn more about mineral

https://brainly.com/question/89259

#SPJ1

The lowest temperature at which magnesium chloride is anticipated to be able to melt ice is -46.5°C.

Molality is defined as the concentration of solute particles per kilogram of solvent expressed in moles.

To calculate the freezing point depression:

[tex]\rm \Delta T_f = i\times K_f\times molality[/tex]

where, ΔTf is the change in freezing point.

[tex]\rm K_f[/tex] is the freezing point depression constant.

molality = (mass/molar mass)[tex]\times[/tex] (1000/mass of solvent in gm)

molar mass of [tex]\rm MgCl_2[/tex] = 95.2 g/mol

i = Van't Hoff factor, for [tex]\rm MgCl_2[/tex] Van't Hoff factor is 3.

Now, plugging the values, we get:

[tex]\rm \Delta T_f[/tex] = 3 [tex]\times[/tex] 1.86 [tex]\times[/tex] (54.3/95.21) [tex]\times[/tex] (1000/100)

[tex]\rm \Delta T_f[/tex] = 31.82 °C

To get the lowest temperature at which magnesium chloride can melt ice, subtract it from the freezing point of water (0°C):

[tex]\rm \Delta T_f[/tex] = [tex]\rm T_0-T_1[/tex] ([tex]\rm T_0[/tex]= freezing point of solvent, [tex]\rm T_1[/tex]= freezing point of solution)

31.82 = 0.0 - [tex]\rm T_1[/tex]

[tex]\rm T_1[/tex]= -31.82 °C

Therefore, lowest temperature to melt the ice is -31.82 °C.

Learn more about Molality here:

https://brainly.com/question/30640726

#SPJ12