At a constant temperature of 700 mmHg, 882 mmHg of pressure is necessary to compress 350 cm3 of hydrogen to 300 cm3 of hydrogen.
Explain about the ideal gas law.In this query, the ideal gas law is utilized. According to the ideal gas law, the ratio of an ideal gas' pressure, volume, and temperature is given by the equation P1V1 = P2V2, where P1 and V1 stand for the gas' beginning pressure and volume and P2 and V2 represent the gas' final pressure and volume, respectively.
Determine how much pressure is different.
P2 - P1 = 0.0046828 kPa
Calculate the pressure difference in mmHg in step six.
A kPa equals 7.50062 mmHg.
In mmHg, 0.0046828 kPa is 0.3505
Increase the original pressure by the difference in pressure.
P1 plus 0.3505 mmHg equals 882 mmHg.
As a result, 882 mmHg of pressure is needed to compress 350 cm3 of hydrogen into 300 cm3 at a constant temperature of 700 mmHg.
To learn more about the ideal gas, visit
brainly.com/question/28257995
#SPJ1
select the correct conversion factor for each step in the following roadmap for a substance with a density of 1 g/ml.
The appropriate conversion factor for a substance with the following density for each step in the road map is:Converting from grams to milliliters is as follows: 1. 1 g/ml 2. 1 ml = 0.001 L
What does milliliters mean?
The metric system frequently uses milliliters (mL) as a unit of capacity or volume measurement. One liter is equal to 1,000 milliliters, so it is one thousandth of a liter. A liquid or a solid's volume is measured in milliliters. 500 mL of water, for instance, could be found in a bottle of water. As they are frequently more accurate than other measurements, milliliters are also used to measure medication dosages.To learn more about milliliters
brainly.com/question/26255204
#SPJ4
for an element in an ionic compound, the number of electrons transferred from the atom to form the ion is the
For an element in an ionic compound, the number of electrons transferred from the atom to form the ion is called ionic bonding.
An ionic compound is defined as a compound that is formed by ionic bonding. Ionic bonding occurs through the process of electron transfer where one atom gives electrons to another. These compounds are neutral compounds made up of positively charged ions and negatively charged ion. The positively charged ion is called cations and the negatively charged ions called anions. This is a chemical compound composed of ions held together by electrostatic forces. Ionic bond are called electrovalent bond. Electrovalent bond is a type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound.
To learn more about Ionic bonding please visit:
https://brainly.com/question/957239
#SPJ4
In each pair below identify which you would expect to have the highest boiling point. Please justify your answers. a. 1-hexanol or 3,3-dimethyi-1-butanol b. 2-hexanol or 1,5-hexanediol
In each pair below identify which you would expect to have the highest boiling point. The correct Option is b 2-hexanol or 1,5-hexanediol
b. 1,5-hexanediol would have the higher boiling point. This is because 1,5-hexanediol has a higher molecular weight than 2-hexanol and it has two hydroxyl groups (OH) in its structure which creates more intermolecular forces of attraction than a single alcohol group in 2-hexanol. Additionally, diols have stronger intermolecular forces than alcohols due to the formation of hydrogen bonds between the hydroxyl groups.The boiling point is the temperature at which a liquid changes its state to a gas at a particular pressure. It is the temperature at which the vapor pressure of a liquid is equal to the pressure of the surrounding atmosphere. At the boiling point, the liquid is at a state of thermodynamic equilibrium with its vapor, and any further increase in temperature will cause bubbles of vapor to form within the liquid.
To learn more about hexanediol here:
https://brainly.com/question/11382430
#SPJ4
how many moles are in 1.2 kg of ammonia, HN3?
Answer:
70.5882352941 moles
Explanation:
Moles= Mass/Molar mass
12000/17
= 70.5882352941 moles
Explanation:
one mole of ammonia= 6.02 × 10²³
But one mole is 17grams
17 grams = 6.02 × 10²³
1200 grams = (1200 × 6.02 × 10²³) ÷ 17
three equations representing a chemical reaction are shown. classify each equation according to type. molecular equation molecular equation drop zone empty. total ionic equation total ionic equation drop zone empty. net ionic equation net ionic equation drop zone empty.
The three equation representing a chemical reaction are shown as :
a) Total ionic equation
b) Net ionic equation
c) Molecular equation
The three equation represented as below :
a) Pb²⁺ (aq) + 2NO₃⁻(aq) + 2Na⁺ (aq) + 2Cl⁻ (aq) ---->
PbCl₂ (s) + 2Na⁺ (aq) + 2NO₃⁻ (aq) = total ionic equation, The complete ionic equation shows all of the dissociated ions in a chemical reaction.
b) Pb²⁺ (aq) + 2Cl⁻ (aq) ---> PbCl₂ (s) = net ionic equation, The net ionic equation is the chemical equation that shows only the elements, compounds, and ions that are involved in the chemical reaction.
c) Pb(NO₃)₂ (aq) + 2NaCl (aq) ---> PbCl₂ (s) + 2NaNO₃ (aq) = molecular equation, A molecular equation is a balanced chemical equation. The ionic compounds are indicated as molecules instead of the component ions.
To learn more about equation here
https://brainly.com/question/29750081
#SPJ4
When a set of electrodes connected to a light bulb is placed in a solution of dextrose and a current is applied, the light bulb does not light up. When the same unit is placed inHCl, it does. Why?
Answer:
Dextrose being an organic compound consists of only molecules with covalent bonds, having no free ions to conduct electricity so the bulb doesn't glows. On the other hand, HCl being a polar covalent compound, in its aqueous solution dissociates into ions and the free ions are responsible for conduction of electricity so the bulb glows.
Bromine monochloride is synthesized using the reaction Br2(g)+Cl2(g)↽−−⇀2BrCl(g)p=1.1×10−4 at 150 K A 201.0 L flask initially contains 0.902 kg of Br2 and 1.066 kg of Cl2. Calculate the mass of BrCl , in grams, that is present in the reaction mixture at equilibrium. Assume ideal gas behavior.
The mass of BrCl that is present in the reaction mixture at equilibrium is 0.519 grams
What is a mass of BrCl?Generally, To calculate the mass of BrCl present at equilibrium, we need to use the equilibrium constant expression (Kp) for the reaction:
Kp = [BrCl]^2 / [Br2] [Cl2]
where [BrCl], [Br2], and [Cl2] are the concentrations of the respective gases at equilibrium.
Since we know the initial amounts of Br2 and Cl2, and the volume of the flask, we can calculate the initial concentrations of each gas.
[Br2]_initial = 0.902 kg / (201.0 L * 0.08206 Latm/molK * 150 K)
= 0.0014 mol/L [Cl2]_initial
= 1.066 kg / (201.0 L * 0.08206 Latm/molK * 150 K)
= 0.0017 mol/L
We are also given the value of Kp, so we can substitute the initial concentrations into the Kp expression and solve for [BrCl].
Kp = [BrCl]^2 / 0.0014 mol/L * 0.0017 mol/L
= (1.1×10^-4)
[BrCl] = √(Kp * [Br2]_initial * [Cl2]_initial)
=√(1.1×10^-4 * 0.0014 mol/L * 0.0017 mol/L)
= 1.61802349*10^{-5} mol/L
To convert molarity to mass, we need to multiply the molarity by the molar mass of BrCl.
The molar mass of BrCl is
(2 * 79.904 g/mol) = 159.808 g/mol.
mass of BrCl = [BrCl] * V * M
=1.61802349*10^{-5}mol/L * 201.0 L * 159.808 g/mol
= 0.519 grams
Read more about mass
https://brainly.com/question/19694949
#SPJ1
A 0.160-g sample of unknown metal (X) reacts with hydrochloric acid to produce 66.5 mL of "wet" gas at 20°C and 754 mm Hg. What is the unknown metal (X)? (The vapor pressure of water at 20°C is 18 mm Hg.)
1X(s) + 4 HCl(aq) → 1 XCl4(aq) + 2 H2(g)
The unknown metal (X), given that it reacts to produce 66.5 mL of "wet" gas at 20 °C and 754 mm Hg is palladium (Pd)
How do I determine the identity of the metal X?We'll begin by obtaining the number of mole of the gas, H₂ produced. Details below:
Temperature (T) = 20 °C = 20 + 273 = 293 KVolume (V) = 66.5 mL = 66.5 / 1000 = 0.0665 L Pressure (P) = 754 - 18 = 736 mmHg = 736 / 760 = 0.968 atmGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) =?PV = nRT
0.968 × 0.0665 = n × 0.0821 × 293
Divide both sides by (0.0821 × 293)
n = (0.968 × 0.0665) / (0.0821 × 293)
n = 0.003 mole
Next, we shall determine the mole of the metal. Details below:
X(s) + 4HCl(aq) → XCl₄(aq) + 2H₂(g)
From the balanced equation above,
2 moles of H₂ were obtained from 1 mole of X
Therefore,
0.003 moles of H₂ will obtained from = 0.003 / 2 = 0.0015 mole of X
Finally, we shall determine the identity of the metal by obtaining it's molar mass. Details below:
Mole of metal X = 0.0015 moleMass of metal X = 0.160 gMolar mass of metal X =?Molar mass = mass / mole
Molar mass of X = 0.160 / 0.0015
Molar mass of X = 106.7 g/mol
Since the molar mass of the metal X is 106.67 g/mol, we can conclude that the identity of the metal is palladium (Pd)
Learn more about identity of metals:
https://brainly.com/question/11205163
#SPJ1
Airbags are activated when a severe impact causes a steel ball to compress a spring and electrically ignite a detonator cap. This causes sodium azide (NaN3) to decompose explosively according to the following reaction.2NaN3(s)→2Na(s)+3N2(g)What mass of NaN3(s) must be reacted in order to inflate an airbag to 73.1 L at s.t.p?
To inflate an airbag to 73.1 L at s.t.p., we need to know the moles of gas produced by the decomposition of sodium azide. We can use the Ideal Gas Law, PV = nRT, to calculate this.
We know that P = 1 atm (s.t.p.), V = 73.1 L, R = 0.08206 Latm/molK, and T = 273 K (0 °C).
Rearrange the Ideal Gas Law to n = PV/RTn = (1 atm * 73.1 L) / (0.08206 Latm/molK * 273 K)
n = 0.26 moles of N2 gas
Since 2 moles of N2 are produced per mole of NaN3, we can divide the number of moles of N2 by 2 to find the number of moles of NaN3.
n(NaN3) = n(N2) / 2n(NaN3) = 0.26 moles / 2 = 0.13 moles. To find the mass, we multiply the number of moles by the molar mass of NaN3.
mass(NaN3) = n(NaN3) * molar mass(NaN3)
mass(NaN3) = 0.13 moles * 65.01 g/mol ≈ 8.45 g
So, 8.45 g of NaN3 is needed to inflate an airbag to 73.1 L at s.t.p
To learn more electrically ignite here:
https://brainly.com/question/4982179
#SPJ4
?Al + ?H2SO4 → ?Al2(SO4)3 +3H2
How many grams of Al would you need to start with in order to make 1.5 moles of H2?
____________g Al
The Correct answer is 675 grams.
To arrive at this answer, we used the balanced equation for the reaction of Al + H2SO4 → Al2(SO4)3 + 3H2.
This equation tells us that for every 3 moles of H2 produced, 1 mole of Al is needed.
Therefore, if we want to make 1.5 moles of H2, we would need 0.5 mole of Al. The molar mass of Al is 26.98 g/mol, so 0.5 mole of Al would have a mass of 13.49 grams.
Learn more about stoichiometry at,
https://brainly.com/question/16060223
in a laboratory experiment hydrogen gas, h2, could be produced by adding nitric acid, hno3 to which of the following?
Option B, Nitric acid corrosive (HNO3) could be used to deliver hydrogen gas (H2) to zinc (Zn).
Nitric acid corrosive (HNO3) reacting with a metal in a lab experiment can deliver hydrogen gas (H2) to the system. The "nitric basic analysis" refers to this response. Zinc (Zn) is the metal that responds to nitric acid by corroding and releasing hydrogen gas.
When nitric corrosive is added to zinc, the reaction results in the production of hydrogen gas and nitrate salt as the end products.
Exothermic in nature, this response releases heat, and the resulting combustible hydrogen gas. To determine the presence of zinc in an example and focus on the properties of hydrogen gas, one can use the reaction between nitric corrosive and zinc.
To learn more about the laboratory experiment at
https://brainly.com/question/13142627?referrer=searchResults
#SPJ4
The question is -
In a laboratory experiment hydrogen gas, h2, could be produced by adding nitric acid, hno3 to which of the following?
a. Mg
b. Zn
c. Cu
d. Hg
blood plasma is forced into the alveoli and interstitial space when which of the following becomes too high?
A. bound to hemoglobin; associated with bicarbonate ions in the plasma
B. dissolved in plasma; associated with salt or acid
C. bound to hemoglobin; bound to albumin
D. bound to plasma proteins; carried as carbon dioxide
E. combined with albumin; associated with carbonic acid
Blood plasma is forced into the alveoli and interstitial space when bound to hemoglobin; bound to albumin.
When the pressure in the alveoli and interstitial space becomes too high, blood plasma is forced into these spaces. This pressure is known as pulmonary edema. In the lungs, the pressure can be increased by factors such as heart failure, where the heart is not able to pump blood effectively, leading to a build-up of pressure in the lungs. One of the causes of this high pressure is the high amount of fluid in the blood vessels. This fluid is composed of plasma, which is mostly water but also contains dissolved ions, proteins, and dissolved gases such as oxygen and carbon dioxide. The fluid that is forced out of the vessels is composed of the plasma and the proteins that are bound to the plasma, including albumin.
To know more about plasma
https://brainly.com/question/13153516
#SPJ4
a central atom with 3 bonding domains and 2 nonbonding domains has geometry. both nonbonding domains are in the plane since this allows the maximum average distance between nonbonding domains.
Tetrahedral is the shape of the molecule. Three bonding domains and two nonbonding domains exist for a centre atom that possesses geometry. Two nonbonding domains are present in the plane.
A number is said to be tetrahedral if it can be represented by the pyramidal shape known as the tetrahedron, which has three sides and a triangle base. The nth tetrahedral number is equivalent to the first n triangular numbers added together. A molecule is defined as a collection of two or more atoms held together by the attractive forces known as chemical bonds; depending on the context, the term may or may not include ions that fit this criteria. Atoms, the smallest unit of matter, exhibit the properties of a chemical element, such as hydrogen.
Learn more about molecules here
https://brainly.com/question/19922822
#SPJ4
The complete question is-
A central atom with 3 bonding domains and 2 nonbonding domains has geometry. both nonbonding domains are in the plane since this allows the maximum average distance between nonbonding domains. The shape of the molecule is ?
true/false. the solvent is usually referred to as the component of a solution which is present as: (select all that apply.) one liter the larger quantity the smaller quantity the liquid which dissolves a solid
The solvent is usually referred to as the component of a solution the smaller quantity.
What is a solvent in chemistry?A solute can be dissolved by a solvent, which creates a solution. In addition to being a liquid, a supercritical fluid, a solid, or a gas can also be a solvent.Many reactions are made easier by solvents, which are substances that dissolve solutes and create solutions. They are utilised for a variety of tasks, including dry cleaning, painting, and extractions. They can be as hazardous as dichloromethane or as harmless as water.The solute is the thing that needs to dissolve, and the solvent is the thing that needs to dissolve it. With a wide variety of solutes and solvents, solutions can be created. We are aware of a wide range of solutions.Learn more about Solvent refer to ;
https://brainly.com/question/25326161
#SPJ4
Find the percent composition of each element in CaSO4. Be sure to add the % sign
and the element.
*Ca is the 1st blank*
*S is the 2nd blank*
*O is the 3rd blank*
The percent composition of each element in CaSO4. S 1 23.21 O 4 46.32 Ca 1 29.00.
What does CaSO4 stand for?A calcium salt that occurs naturally is calcium sulphate, or CaSO4. It is most generally referred to as gypsum when it is present as the dihydrate CaSO42H2O. The sulphate is used as a soil conditioner as uncalcined gypsum.The recognised value for the mass percentage of water in the hydrated compound CaSO4•2H2O is 20.9%.The formula for percent composition is 100 multiplied by (mass of element/molecular mass).A compound's percentage composition is calculated by dividing the amount of each ingredient by the sum of all the individual elements in the compound and multiplying the result by 100.To learn more about percent composition refer to:
https://brainly.com/question/17021926
#SPJ1
A 50 mL solution of strong acid of pH = 1 is mixed with a 50 mL solution of strong acid of pH = 2. The pH of the mixture will be :
(log105.5=0.74AB1.26C1.76D
The pH of the mixture will be approximately 1.04 (Option A).
The pH of an acid solution is defined as the negative logarithm of the hydrogen ion concentration. Since both solutions are strong acids, they will have a high hydrogen ion concentration and a low pH. The pH of the first solution is 1, and the pH of the second solution is 2, which means the first solution has a hydrogen ion concentration of 10^-1 M and the second solution has a hydrogen ion concentration of 10^-2 M.
When the solutions are mixed, the final hydrogen ion concentration will be the sum of the initial concentrations.final [H+] = [H+]1 + [H+]2 = 10^-1 M + 10^-2 M = 1.1*10^-1 M
So, the pH of the mixture is:
pH = -log(11 x 10^-2) = -log(11) + log(10^-2) = 1.04. Therefore, the answer is A (1.04).
To learn more about strong acid here:
https://brainly.com/question/16749233
#SPJ4
Many different arrangements of electrons in an atom (configurations) are possible. One configuration will always be lowest in energy. This most stable configuration of an atoms electrons is called the ground state We can identify the ground state of most atoms by determining if a configuration obeys all three of the basic ground state rules (auf bau principle, Hund's rule, and the Pauli Exclusion principle). For each of the following configurations, indicate if the configuration is a ground state or which of the three ground state rules it violates 1s 2s 2p 3d 4p 1s 2s 2p 4s 3d 4p 2p 1s 2s 3s 3p 4s 4p configuration (a) I Choose l configuration (b) Choose ] configuration(c) Choose ] configuration
Configuration (a) is a ground state. Configuration (b) violates Hund's rule. Configuration (c) violates the Pauli Exclusion principle.
What is configuration?Configuration is the process of organizing the components of a computer or network to establish the way it will operate. It involves setting up the hardware, software, and network connection in order to make the system function correctly. Configuration also includes the selection of device drivers, software settings, and user accounts. Configuration is important to ensure the system is secure, efficient, and well-suited to the user's needs.
(a) 1s2s2p3d4p is a ground state configuration.
(b) 1s2s2p4s3d4p violates the Aufbau Principle which states that electrons must fill lower energy levels first before moving to higher energy levels.
(c) 2p1s2s3s3p4s4p violates the Pauli Exclusion Principle which states that no two electrons can have the same set of quantum numbers.
To know more about configuration click-
https://brainly.com/question/26084288
#SPJ4
which of the following would be considered good practice for cleaning up large pieces of contaminated glass in a laboratory biohazard spill?
We would be considered the good practice for the cleaning up large pieces of the contaminated glass in laboratory biohazard spill is to wear the gloves.
The good practice for the cleaning of the large pieces of the contaminated glass in lab biohazard spill are :
1) To Wear gloves
2) To wear the Lab coat
3)To wear the Face protection
4) To Use a dust pan
5) Use the Tongs
These are practices that should be taken in a laboratory for cleaning of the large pieces of the contaminated glass in lab biohazard spill. These protection should be taken in the lab.
To learn more about biohazard spill here
https://brainly.com/question/28257541
#SPJ4
Later in the course, we will compare the halogenation of differently substituted carbons, comparing reactions like the ones below. Which of the following statements is true about reactions I and II? O Neither reaction has a positive heat of reaction (AH) O Only reaction II has a positive heat of reaction (AH) O Only reaction I has a positive heat of reaction (AHº) O Both reactions have a positive heat of reaction (Hº)
The assertions regarding reactions I and II in the reactions connected below are correct; neither reaction has a positive heat of reaction .
A material can be halogenated chemically by adding one or more halogens to it. Because halide-containing substances are so prevalent, this kind of transformation is essential for creating polymers and medicines, among other things. In fact, this kind of conversion happens so frequently that it is hard to give a complete description. This article's main focus is on how elemental halogens are used in halogenation (F2, Cl2, Br2, I2). Halogen acids and halide salts are frequently used to introduce halides. For the purpose of adding halogens to a range of substrates, including thionyl chloride, there are a number of specialized reagents available.
complete question:Later in the course, we will compare the halogenation of differently substituted carbons, comparing reactions like the ones below.
Which of the following statements is true about reactions I and II?
A: Only reaction II has a positive heat of reaction
B: Neither reaction has a positive heat of reaction
C: Both reactions have a positive heat of reaction
D: Only reaction I has a positive heat of reaction
learn more about halogens Refer:brainly.com/question/24751735
#SPJ4
Write the net ionic equation for the following molecular equation.HBr is a strong electrolyte. HF is a weak electrolyte.KF(aq) + HBr(aq) → KBr(aq) + HF (aq)(Use the lowest possible coefficients. Be sure to specify states such as (aq) or (s). If a box is not needed, leave it blank.)
The chemical equation used for a chemical reaction involving ionic species is called the complete ionic equation.
What is a net ionic equation?The chemical equation known as the net ionic equation only displays the substances that are directly involved in the chemical process.By dissolving all soluble ionic chemicals (those denoted with a (aq)) into their corresponding ions, the ionic equation can be written. To demonstrate that an ion is present in solution, it should be displayed with its charge and a (aq). To display the quantity of each ion present, use coefficients.A complete ionic equation also contains the spectator ions, whereas a net ionic equation just displays the chemical species that are involved in a reaction.A chemical equation for a process known as the net ionic equation only includes the species that are really involved in the reaction. In double displacement reactions, redox reactions, and acid-base neutralisation processes, the net ionic equation is frequently employed.The corresponding ionic equation is:
{eq}K^{+}(aq) + CH_{3}COO^{-}(aq) + H^{+}(aq) + Br^{-}(aq) ⇒K^{+}(aq) + Br^{-}(aq)
Learn more about net ionic equation refer to :
https://brainly.com/question/13879496
#SPJ4
FILL IN THE BLANK lemon juice has a ph of about 2.0, compared to a ph of about 1.0 for stomach acid. therefore, the concentration of h in stomach acid is_______than that of lemon juice.
The concentration of h in stomach acid is 10 times higher than that of lemon juice.
What is concentration ?
A solution's concentration is determined by how much solute has been dissolved in a given amount of solvent or solution. A concentrated solution is one in which the amount of dissolved solute is substantial. A solution is considered to be diluted when there is just a trace amount of dissolved solute present in it.
What is ph?
Water's pH determines how acidic or basic it is. ranging from 0 to 14, with 7 denoting neutrality. pH levels below 7 indicate acidity, whereas pH values above 7 demonstrate baseness. In reality, the pH of water is a measurement of the amount of free hydrogen and hydroxyl ions present in the solution.
Therefore, concentration of h in stomach acid is 10 times higher than that of lemon juice.
Learn more about concentration from the given link.
https://brainly.com/question/17206790
#SPJ4
which of the following is not a difference in the pathways by which fatty acids are degraded and synthesized?
The pathways for fatty acid degradation and synthesis are similar but not identical. The key differences between the two pathways are:
Degradation occurs in the mitochondria and involves the breakdown of fatty acids into smaller molecules through beta-oxidation.Synthesis occurs in the cytoplasm and involves the building up of fatty acids from smaller molecules through the process of fatty acid synthesis.The enzymes used in the degradation and synthesis pathways are different.The overall energy balance is different between the two pathways; degradation releases energy while synthesis consumes energy.So the statement "The pathways for fatty acid degradation and synthesis are identical." is not a difference in the pathways.
To learn more about degradation and synthesis here:
https://brainly.com/question/4622451
#SPJ4
Based on the Tonicity in Elodea Cells lab, a hypotonic environment causes a cell to swell or burst because
-the water in the solution moves into the plant cell.
-the solutes in the solution have a lower concentration than the solute concentration inside the plant cell.
-the water is moving down its concentration gradient from high to low.
-The water moved across the selectively permeable membrane down its concentration gradient from an area of high water concentration to an area of low water concentration. There were fewer solutes in the solution and more solutes in the cell, which is why the water moved into the cell.
A hypotonic environment causes a cell to swell or burst because the water is moving down its concentration gradient from high to low.
What is hypotonic environment?
A hypotonic environment is an environment where the concentration of solutes outside a cell is lower than the concentration of solutes inside the cell. This can cause water to move into the cell by osmosis, causing the cell to swell and possibly even burst. Hypotonic environments are most commonly found in aquatic environments, but can also be seen in a variety of other settings, such as in a cell culture dish or in a protein crystallization experiment. In the case of aquatic environments, hypotonic solutions are those that have a lower salt concentration than the solution inside the cell, causing the cell to absorb more water than it would in a hypertonic solution.
To learn more about cell
https://brainly.com/question/26122239
#SPJ4
The oxidation stateor oxidation number is a given to each based on the. It is the an atom would have if all shared were assigned to the with a attraction for those electrons. 2. To identify redox reactions using oxidation states, begin by assigning to each in the reaction A change in for the atoms indicates a redox reaction.
Each electron is given an oxidation number according to where it is located. Yes A change in the atoms' characteristics indicates a redox reaction. either the state or the oxidation number.
Based on where the electrons are located, is a number given to each atom. It represents the charge an atom would have if all of its shared electrons were allocated to it due to a higher attraction for those electrons. The oxidation state or oxidation number of each atom is represented by a number based on the distribution of its electrons. It represents the charge an atom would have if all of its shared electrons were allocated to it due to a higher attraction for those electrons.
Learn more about electron here
https://brainly.com/question/29757010
#SPJ4
Which of the following accurately explains why along the same period, a non-metal has a smaller atomic radius than a metal?
A.Non-metals have an expanded octet
B. Non-metals have higher electronegativities
C. Non-metals have higher ionization energies
D. Non-metals have a higher effective nuclear charge
A non-metal has a smaller atomic radius than a metal along the same period because Non-metals have higher electronegativities.
What is metal?
Metal is an element that is widely used in many industries due to its ability to be molded and formed into a variety of shapes and sizes. It is a hard, dense, and durable material that is resistant to wear, corrosion, and extreme temperatures. Commonly used metals include iron, aluminum, copper, titanium, and steel. These metals have specific properties that make them ideal for use in a variety of applications. Iron is a strong metal used to make steel, which is used for construction and infrastructure. Aluminum is lighter than iron and is often used for objects that need to be moved frequently, such as aircraft and automobiles. Copper is an excellent conductor of electricity and is used in wiring and electronic components.
To learn more about metal
https://brainly.com/question/28183884
#SPJ4
How many particles are in 65 grams carbon tetraflorde
65 grams of carbon tetrafluoride contain 0.73860 moles of particles. One carbon (C) and four fluorine (F) atoms make up one molecule of carbon tetrafluoride (CF4) .
What's a mole?The quantity of a substance with the same number of chemical species—atoms, molecules, ions, etc.—is referred to as a mole. as the carbon-12 isotope is 12 grams of constituents.
Carbon tetrafluoride is what?Carbon tetrafluoride is a substance with the chemical formula CF4. It is used as a refrigerant to cool the metal's application environment to reduce the rate of corrosion. It is colorless. Carbon tetrafluoride may also be referred to as tetrafluoromethane.
How many atoms in CF4 are bonded together?The central carbon atom unites all four fluorine atoms in the Carbon Tetrafluoride molecule. We take a quick look at the CF4 molecule Lewis structure to determine the hybridization. Carbon and fluorine are connected by four covalent bonds.
Therefore, 65 grams of carbon tetrafluoride contain 0.73860 moles of particles.
Learn more about carbon tetrafluoride :
brainly.com/question/29452273
#SPJ1
Which of the following statements correctly describe reaction intermediates? Select all that apply.
Multiple select question.
A) Reaction intermediates are short-lived molecules that form as a result of a chemical reaction.C) Reaction intermediates are molecules that are produced as a result of a chemical reaction.
What is the molecules ?
Molecules are the smallest unit of a substance that can exist independently and has the same chemical properties as the original substance. They are made up of atoms that are connected together by chemical bonds. Molecules are the basic building blocks of all matter, and they exist in a variety of shapes and forms, including solids, liquids, and gases. Molecules can also be composed of multiple elements, such as water which is composed of two hydrogen atoms and one oxygen atom. Molecules can be found in a wide range of materials, from the air we breathe to the food we eat.
To learn more about molecules
https://brainly.com/question/26044300
#SPJ4
Complete question
A) Reaction intermediates are short-lived molecules that form as a result of a chemical reaction.
B) Reaction intermediates are stable molecules that form as a result of a chemical reaction.
C) Reaction intermediates are molecules that are produced as a result of a chemical reaction.
D) Reaction intermediates are molecules that remain unchanged throughout a chemical reaction.
Element X is a solid metal that reacts with chlorine to produce a water-soluble binary compound. The metal combines with chlorine to form a compound with the formula MCl2 MCl2 . What Group of the Periodic Table is Ma member of?
Element X is a member of Group 17 of the Periodic Table, also known as the Halogen family.
What is chemical elements?Chemical elements are the building blocks of all matter in the universe. They are the simplest form of matter, consisting of single atoms or molecules, and are composed of the same type of atom. There are 118 known elements that make up the periodic table, which are either naturally occurring or artificially created. Each element has unique properties that can be used to describe its characteristics.
All Group 17 elements, including X, are non-metals that are highly reactive and form compounds with most other elements. Element X is likely to be either fluorine, chlorine, bromine, or iodine. When element X reacts with chlorine, it forms a binary compound with the formula MCl2. This compound is water-soluble, meaning it can be dissolved in water.
To know more about chemical elements click-
https://brainly.com/question/28376204
#SPJ4
which of the following statements about process (functional) layouts is/are correct? multiple select question. equipment is arranged in sequence order of processing so the product can flow smoothly down the line. process layouts are common in service environments. process layouts often use higher skilled labor than product layouts do. equipment is selected for high-volume output. equipment is arranged by type rather than by processing sequence.
The process(functional) layouts is where the work stationary and the machinery are not arranged according to the production sequence.
The process (functional) layouts are :
1) Process layouts are the common in Service environments.
2) Equipment is arranged by the type rather than processing sequence.
3) Process layouts often use the higher skilled labor than Product layouts do.
The process layout is also called as functional layout. The process ( functional) layouts handle a variety of goods or services. In the process layouts the similar items are grouped together. In the process layout, the jobs are grouped by the function, not by the product.
To learn more about process layouts here
https://brainly.com/question/30270163
#SPJ4
the conversion of acetyl chloride to methyl acetate occurs via the following 2-step mechanism: this conversion of acetyl chloride to methyl acetate would be classified as a reaction
A tenfold rise in acetyl chloride concentration corresponds to a tenfold increase in reaction rate.
What is methyl acetate?Methyl acetate is a carboxylate ester with the formula CH3COOCH3, commonly known as MeOAc, acetic acid methyl ester, or methyl ethanoate. It is a combustible liquid with a distinct flavor that smells something like glue and some nail polish removers. Colorless and smelling like fruit, methyl acetate is a liquid. As a solvent, it is utilized in the production of medications as well as lacquers and paint removers.Different issues are brought up by additional common solvents. For instance, methyl acetate is more hazardous than acetone if inadvertently consumed, so producers use it to give the nail paint remover a harsh taste. It may irritate the eyes, nose, and throat when exposed to ethyl acetate in excess. Overexposure that is too severe might make a person weak, sleepy, and unconscious.To learn more about methyl acetate refer to:
https://brainly.com/question/13386042
#SPJ4
