what property is different between the atomic orbitals in a 3p subshell? group of answer choices shape size orientation in space

Tests for the presence of cyclohexanol.

The Lucas test is a chemical reactant test for determining the presence and degree of alcoholism in solution. Like most substances, cyclohexanol has many chemical properties, one of which is the presence of alcohol groups.

The presence of this chemical group allows the detection of cyclohexanol using the Lucas test. The Lucas test causes a reaction in the presence of alcohol, converting the alcohol to chloroalkanes, which tend to be poorly soluble in aqueous solutions. Given this, a positive result would appear to be that the solution is separating into cloudy areas containing chloroalkanes on top of a much clearer layer.

A bromine water test is performed to identify molecular unsaturation. Since cyclohexanol is a saturated molecule, electrophilic addition of bromine does not occur. Cyclohexanol has no π-unsaturation, so it is not nucleophilic. It does not react with bromine unless energy is supplied in the form of light or heat. So no red brown color will be observed during the reaction.

To know more about cyclohexanol visit:

https://brainly.com/question/6036281

#SPJ4

The reduction reaction is the type of reaction which is defined under a redox reaction.

Such a type of reaction involves reactions of two types:

Oxidation reaction

Reduction reaction

This is the redox reaction.

The reduction and the oxidation reaction separately are called the half reactions.

Reduction reaction is when an element is the chemical reaction is getting reduced.

This happens in many different ways. Such as reduction in the number of atoms, or when the element gains electrons and the oxidation state is reduced.

It also takes place when the oxygen is removed.

Reduction reaction occurs when a reactant gains electrons in the reaction.

Therefore the reduction reaction is described by the reduction of the oxidation state and the gains of electrons.

To learn more about reaction, refer: https://brainly.com/question/16867778

#SPJ4

A buffer is a substance that can survive pH fluctuations caused by the addition of acidic or basic substances. It might balance off minor additions of acid or base, keeping the pH of the solution largely constant.

This is crucial for procedures and/or reactions that demand intricate and stable pH ranges. The amount of acid or base in buffer solutions can be determined by their pH range.

A weak conjugate acid-base pair, which can be either an or b, must make up a buffer. a conjugate base of a weak acid, or b. a conjugate acid of a weak base. The following, for instance, could serve as buffers when mixed together in a solution:

To know more about buffer solution, visit:

https://brainly.com/question/24262133

#SPJ4

The molecular formula for the provided composition of different elements is C₆H₁₄N₄.

Every time a problem provides you with a compound's molar mass, you can use a little trick to help you determine the compound's molecular mass faster.

More specifically, instead of determining the empirical formula first, then using the molar mass to get the molecular formula, we can skip the empirical formula altogether.

As you know, a compound's molar mass tells we what the mass of one mole of that substance is. In this case, one mole of our compound has a mass of 142.00 g . This means that if we pick a sample of 142.00 g of this compound, w can use its percent composition to get the exact number of moles of each element you get per mole of compound.

So, we know that this compound's percent composition is as follows:

carbon ---> 50.7%

Hydogen ---> 9.9%

Nitrogen ---.> 39.4%

This means that it contains

142 g of compound × 50.7 g of carbon / 100 g of compound = 71.99 g of Carbon

142 g of compound × 9.9 g of hydrogen/ 100 g of compound = 14.05 g of hydrogen

142 g of compound × 39.4 g of nitrogen/ 100 g of compound = 55.94 g of nitrogen

Now all we have to use the molar masses of

hese three elements to determine how many moles of each we get in one mole of our compound.

For carbon (C) : 71.99 g × 1 mole of C / 12.01 g

= 5.99 ~ 6

For Hydrogen (H) : 14.05 g × 1 mole of H / 1.007g

= 13.95 ~ 14

For Nitrogen (N) : 55.94 g × 1 mole of N / 14.006 g

= 3.99 ~ 4

therefore, molecular formula of compound will be C₆H ₁₄N₄ .

To learn more about Molecular formula, refer:

https://brainly.com/question/13058832

#SPJ4

Because S waves do not pass through core, that's why scientists think the Earth's outer core is liquid.

Earth's interior is separated into a number of strata. The thickest layer underneath the crust, which makes up the surface, is the mantle. The core comes next. The inner core and the outer core are the two distinct portions of the core. The crust, mantle, outer core, and inner core of the Earth are all distinct layers.

The Earth's inner core is its deepest layer. It is solid and separate from the liquid outer core. The solid spheroid that makes up the Earth's inner core is composed primarily of iron and nickel but also contains other metals. In the inner core are siderophiles, or substances that dissolve in iron. These substances include platinum, cobalt, and gold.

To know more about   Earth's core visit : https://brainly.com/question/21212998

#SPJ9

The number of oxygen molecules required for two glucose molecules to undergo cellular respiration is 12.

To know more about glucose visit:

https://brainly.com/question/2396657

#SPJ4

The mixture contains 250 mg of lactose as diluent.

Total mixture = 1.25 g

1x + 4x = 1.25 g

5x = 1.25g

x = 1.25 / 5

x = 0.25 g

lactose = 0.25 g = 250 milligram.

Thus in the mixture containing codeine sulfate, with lactose as an inert diluent, 250 mg of lactose is present.

To learn more about mixture click here:

https://brainly.com/question/6358654

#SPJ4

The name of all functional groups in the molecule is carbonyl, alkyne group, thiol, and an amine group.

To learn more about functional group visit:

brainly.com/question/14618322

#SPJ1

The atomic number is the total number of protons of an atom, while the mass number is the total number of its protons and neutrons.

An atom has properties and masses that are unique to each other. With the discovery of the particles that make up the atom known as atomic number (Z) and mass number (A).

ᵃz X

A = mass number

Z = atomic number

X = element symbol

The atomic number (Z) indicates the number of protons (positive charge) or the number of electrons in the atom. This atomic number is a characteristic of an element. Because the atom is neutral, the number of protons equals the number of electrons, so the atomic number also indicates the number of electrons.

The mass number is usually given the symbol A. This mass number is used to determine the number of nucleons in an atom of an element. The nucleon itself is a particle that makes up the atomic nucleus consisting of protons and neutrons.

#SPJ4

The correct ratio of moles of Ni²⁺ : PO₄³⁻  is 3 : 2.

The reaction of  Na₃PO₄ and NiCl₂ is given as :

Na₃PO₄   +  NiCl₂   ---->  Ni₃(PO)₂   +   NaCl

The balanced chemical equation between the Na₃PO₄ and NiCl₂   is given as :

2Na₃PO₄   +  3NiCl₂   ---->  Ni₃(PO)₂   +   6NaCl

The complete ionic equation between the Na₃PO₄ and NiCl₂   is given as :

6Na⁺   +  2PO₄³⁻  + 3Ni²⁺  + 6Cl⁻  --> Ni(PO₄)₂  +  6Na⁺  +  6Cl⁻

from the above equation it is clear that ratio of moles of Ni²⁺ : PO₄³⁻  is

3 : 2.

Thus , The correct ratio of moles of Ni²⁺ : PO₄³⁻  is 3 : 2.

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

The water cycle explains how water vapor from the earth's surface rises into to the stratosphere, cools as well as condenses to form rain or snow behind clouds, and then falls back to the earth's surface as precipitation.

Water is a material that exists throughout gaseous, liquid, various solid phases and is made up of something like the chemical elements both oxygen and hydrogen. It is a colorless, odorless fluid at room temperature with the crucial property of dissolving several other compounds.

This is theoretically feasible, but the procedure would also be quite risky. Atoms of oxygen and hydrogen are necessary to produce water. You're still left without merely individual oxygen and hydrogen molecules after mixing them together.

To know more about water visit:

https://brainly.com/question/1216922

#SPJ4

When sodium carbonate is dissolved in water, the equation is [tex]Na_2CO_3 (s) --- > 2Na^+ (aq) + CO_3^{2-} (aq)[/tex].

When carbon dioxide is placed in water, aqueous carbon dioxide is formed:  [tex]CO_2 (g) --- > CO_2(aq)[/tex]

Some compounds are water-soluble, some are just partially soluble, while others are insoluble in water. Some soluble or partially soluble substances dissociate in water into their component ions. These substances are said to be ionic.

Sodium carbonate, like every other sodium salt, is soluble in water. It dissolves in water to form an aqueous solution of sodium carbonate.

While in solution, sodium carbonate dissociates into its component ions according to the following equation:

[tex]Na_2CO_3 (s) --- > 2Na^+ (aq) + CO_3^{2-} (aq)[/tex]

Carbon dioxide, on the other hand, does not dissociate in water. Instead, it dissolves in water where most of it remains as aqueous carbon dioxide in equilibrium with a small amount of hydronium ion and hydrogen carbonate ion.

Since the hydronium and hydrogen carbonate ions formed are so minute, the equation of the reaction can be written as: [tex]CO_2 (g) --- > CO_2(aq)[/tex]

More on the dissolution of substances can be found here: https://brainly.com/question/28580758

#SPJ1

The pH change when 0.098 mole HI is added to 1.00L of the buffer containing 0.378 mole C6H5NH3Cl and 0.450 mole C6H5NH2 is 0.207.

What is buffer?

Buffer is a solution which resists pH change when small amounts of acids or bases are added to it. This is due to the presence of weak acids and their conjugate bases or weak bases are their conjugate acids in the buffer solution. Because of this addition of small quantities of acids or bases will not alter the pH due to neutralization upon addition.

The pH change in the buffer solution after adding 1 mole of HI is,  

pH = pKa + log [C6H5NH2] / [C6H5NH3+] = 4.6 + log [ 0.450M] / [0.378M]

pH1 = 4.675

When 0.098 mole HI is added to 1L of the buffer,

[C6H5NH2] = 0.450 - 0.098 = 0.352

[C6H5NH3+] = 0.378 + 0.098 = 0.476

pH = 4.6 + log [0.352 / 0.476]

pH2 = 4.468

pH = |pH2 - pH1| = |4.468 - 4.675| =  0.207

Therefore, the pH change when 0.098 mole HI is added to 1.00L of the buffer containing 0.378 mole C6H5NH3Cl and 0.450 mole C6H5NH2 is 0.207. We can observe that the change in pH is very small upon addition of HI.

To learn more on buffer solutions click on the given link https://brainly.com/question/27371101

#SPJ4

The pH strength is measured by measuring pH using an indicator, hydrogen-electrode method, quin hydrogen-electrode method

The pH scale ranges from the scale of 0 to 14 in water. pH 7 is called as neutral state. Solution ranging the pH value from 0 to 7 comes under the acidic state.

The methods for measuring pH are categorized in five categories:

pH is represented by the following equation:

pH= -log[H⁺] where H⁺ is the concentration of H⁺ ion in the solution.

If a solution has lower pH value, then it is more acidic in nature.

pH value of normal water is  around 7.

pH value of sodium hydroxide is near to 14.

To know more about pH, visit here:

https://brainly.com/question/15289741

#SPJ4

The maximum number of electrons that can populate a given orbital is two assuming that the pauli exclusion principle remains valid.

To know more about electrons visit:

https://brainly.com/question/1255220

#SPJ4

In order to produce the new, 2-carbon acetyl CoA molecule, one carbon is taken out of the three-carbon pyruvate molecule produced during glycolysis.

Compounds containing three or more carbon atoms are simpler to extract electrons from and convert to CO2 than two-carbon compounds like acetyl CoA.

Glycolysis is the process by which glucose is broken down to produce energy. It produces water, ATP, NADH, and two pyruvate molecules.

The citric acid cycle is a series of enzyme-catalyzed reactions that take place in the mitochondrial matrix and convert acetyl-CoA to carbon dioxide and coenzymes to ATP chain of electron transport.

To know more about Kreb cycle, visit-https://brainly.com/question/13153590

#SPJ4

Halogens are the members of group 17 in the periodic table. The definition of "halogen" is "salt former." Silver bromide, potassium iodide, calcium fluoride are the compound of halogens. Option c is correct option.

Halogen compounds that are created when halogens combine with metals. They have seven electron in their valence shell and tend to form negative ion with minus one charge. Halogens are very reactive and form salts with the metals. Their ability to create salts is how they got their names.

To know more about halogens check below link:https://brainly.com/question/17011389

#SPJ4

When potassium permanganate is reacted with thiosulfate, then there is formation of potassium sulfate and magnese ion.

The inorganic substance potassium permanganate has the formula KMnO₄. It is a crystalline salt that is purple-black and dissolves in water into a solution of K+ and MnO₄.

As a potent oxidizing agent, dermatitis medicine, wound cleaner, and general disinfectant, potassium permanganate is widely employed in the chemical industry and labs.

A balanced equation for the reaction of thiosulfate permanganate ions in acidic solution to form sulfate and manganese (ii) ions is

KMno₄ + Na₂S₂o₃ + H₂O ⇒ K₂So₄ + KOH + MnO₂ + Na₂So₄

Thus, the equation is KMno₄ + Na₂S₂o₃ + H₂O ⇒ K₂So₄ + KOH + MnO₂ + Na₂So₄.

To learn more about potassium permanganate, follow the link;

https://brainly.com/question/20630418

#SPJ1

In order for electrolysis to take place, a salt such as Na2SO4 is required. It makes available the ions Na+ and SO42, both of which are drawn to the electrodes in the solution and move toward them as a result. They do not experience a discharge when brought close to the electrodes. However, they are able to cancel out the electric charges carried by the ions that are formed as a result of the destruction of water by these electrodes. Let's check out what's happening at each of the electrodes.

At the cathode, often known as the negative pole, water breaks down in the following manner:

2H2O+2e−⟶H2+2OH−.This is only conceivable if some positive ions are available near the cathode to compensate for the negative charges emerging in the solution with these freshly produced OH ions. The only way this can happen is if there are some positive ions available near the cathode. In the absence of positive ions, such as Na+, in the vicinity of the cathode, the newly formed OH ions would function as a barrier to subsequent electrons coming from the external circuit, preventing those electrons from reaching the electrode and preventing the electrode from interacting with water. The electrolysis would come to a halt as a result.

At the anode, often known as the positive pole, the following reactions take place in water:

4H2O⟶O2+4H++4e− .This is only conceivable if there are negative ions coming near the anode to compensate for the positive charges that are forming in the solution as a result of these freshly produced H+ ions. A positively charged solution would result if the solution near the anode did not include any negative ions, such as SO42. Instead, the solution would contain the new H+ ions. This would stop any further electrons from being released from the water as a result. The electrolysis would come to a halt as a result.

The process culminates in a transformation of the solution's chemical makeup near the electrodes. When you go closer to the cathode, you'll notice that the solution has a higher concentration of NaOH. In the vicinity of the anode, the solution includes an increasing amount of H2SO4. Naturally, if you agitate and combine solutions that are anodic and cathodic, the acid and the base will neutralize each other, which will result in the solution being regenerated to contain the initial salt.

Know more  about Electrolysis at,

https://brainly.com/question/12054569

The thermal energy is transferred to the surroundings is 130 J.

Energy is a quantitative property given to a body or physical system and can be identified as work being done in the form of heat and light. Energy is Conserved - The law of conservation of energy states that energy can be transformed into form, but cannot be created or destroyed. Energy is the ability to do work. It can exist in electrical, kinetic, thermal, electrical, chemical, nuclear, or other forms.

Calculation:-

initial energy = 245 J

final energy = 114 J

energy transferred to the surroundings = 245 -115

                                                                 = 130 J

Energy exists in many forms. Examples include light energy, thermal energy, mechanical energy, gravitational energy, electrical energy, acoustic energy, chemical energy, and nuclear or atomic energy. Each form can be transformed or changed into other forms.

Learn more about energy here:-https://brainly.com/question/13881533

#SPJ4

The oxidizing agent, often referred as an electron acceptor, is typically at one of its higher oxidation states since it will receive electrons or just be reduced.

Equipment that is vulnerable to heat is sterilized using chemical agents. Long pipettes and glasses can be sterilized using an appropriate process using chemical solutions. Throughout the absence organic life, steam chemical chemical agents are quite often utilized at pilot scale.

High or low temperatures, dehydration, osmotic stress, radiation, and filtration are examples of physical agents. Cleaning products, antiseptics, antibacterial, and chemotherapeutic antibacterial compounds are examples of chemical agents used for control.

To know more about agents visit:

https://brainly.com/question/10547418

#SPJ4

A colorimeter is an instrument used to measure the amount of heat absorbed by a solution. This absorbance is proportional to the concentration of the solute in solution.

A calorimeter is a device used in calorimetry, a procedure for calculating heat capacity and measuring the heat of chemical processes or other physical changes. Among the most popular kinds are differential scanning calorimeters, isothermal micro calorimeters, titration calorimeters, and accelerated rate calorimeters. A straightforward calorimeter is basically a metal container with a thermometer positioned above a combustion chamber. It is one of the measuring tools used in the research of chemistry, biochemistry, and thermodynamics.

To calculate the enthalpy change per mole of substance A in a reaction involving two compounds A and B, the substances are individually introduced to a calorimeter and the beginning and final temperatures (before and after the reaction) are recorded. The mass and specific heat capacity of the substances multiplied by the temperature change provide a figure for the amount of energy released or absorbed during the reaction. The enthalpy change of the reaction is calculated by dividing the energy change by the quantity of A that was present.

Learn more about calorimeter here:

https://brainly.com/question/14281142

#SPJ4

The percentage of the oxygen in the air will remain unchanged.

The ideal gas law states that the temperature is directly proportional to pressure and volume. Since the gas is enclosed in the container, the volume will be fixed, so an increase in temperature leads to an increase in pressure.

The atomic mass and the number of molecules are fixed properties of the gas sample and cannot change with the heat. The density depends on the mass and the volume. The mass is also fixed property of a gas sample and the volume is being held constant, since we are dealing with a closed container. Therefore, the density must also remain constant. Because the number of molecules and the volume are constant, the average space between the molecules must remain constant.

Learn more about oxygen here https://brainly.com/question/17584736

#SPJ4

The moles of potassium dichromate , K₂Cr₂O₇ are required to prepare a 250 mL solution of with a concentration of 2.16 M  is 0.54 mol.

given that :

molarity = 2.16 M

volume = 250 mL = 0.25 L

the molarity is given as :

molarity = number of moles / volumes in L

from this we can calculate the number of moles, we get :

number of moles of K₂Cr₂O₇ = molarity × volume

number of moles of K₂Cr₂O₇ = 2.16 × 0.25

number of moles of K₂Cr₂O₇ = 0.54 mol

Thus, The moles of potassium dichromate , K₂Cr₂O₇ are required to prepare a 250 mL solution of with a concentration of 2.16 M  is 0.54 mol.

To learn more about moles here

https://brainly.com/question/15209553

#SPJ4

The answers include the following:

This is referred to as the degree of hotness or coldness of a substance and it is the direct measurement of thermal energy. Its S.I unit is referred to as Kelvin and it is measured using the instrument known as thermometer which uses various techniques to obtain accurate results.

It is also proportional to the average kinetic energy of a substance thereby making it the correct choice.

Read more about Temperature here https://brainly.com/question/25677592

#SPJ1

P4O10 mass is equal to 469.67 470 grams. Probability of occurring decaoxide and water are produced when the highly reactive and deadly gas phosphine reacts with oxygen.

At room temperature, phosphophine (PH3) is a colorless, explosive gas with a fishy or garlicky odor. Phosphine exposure may result in symptoms such as nausea, vomiting, diarrhea, thirst, discomfort in the muscles, breathing difficulties, and pulmonary fluid in the lungs.

One phosphorus atom and three hydrogen atoms make up the chemical complex phosphine, which has been found on Earth, Jupiter, and Saturn. It's fairly common in the atmospheres of the gas giants, both are hydrogen-rich.

PH3 has a molar mass of 34 g/mol.

PH3 moles equal 225 g/(34 g/mol)

moles PH3 = 6.62 mol

The balanced equation is:

4PH3(g) + 8O2(g) → P4O10(g) + 6H2O

The number of moles of P4O10 is:

moles P4O10 = 6.62 mol * (1/4)

moles P4O10 = 1.65 mol

P4O10 has a molar mass of 283.89 g/mol.

P4O10 mass equals 1.65 mol times 283.89 g/mol.

mass P4O10 = 469.67 grams ~ 470 grams

To know more about phosphine visit:

https://brainly.com/question/14093609

#SPJ4

Originally,  a. seawater was used to remove the calcium carbonate that is present in limestone.

Evaporation is the process by which an element or compound changes from its liquid state to its gaseous state below the temperature at which it boils. In the water cycle, this is how liquid water enters the atmosphere as water vapour.

It is a sedimentary rock, limestone. It was created from tiny rock or stone fragments that were compressed under pressure. It can be created either through evaporation or by living things.

Corals, clams, and oysters are just a few examples of the ocean-dwelling species that employ calcium carbonate in saltwater to build their shells and bones. When these organisms pass away, the waves shatter their shells and bones, which land on the ocean floor where the pressure of the water pushes the sediments together to form limestone.

Evaporation is the process that produces limestone. When calcium carbonate-containing water evaporates, it leaves behind a sediment deposit that, when put under water pressure, turns into limestone.

To know more about evaporation visit:

https://brainly.com/question/5019199

#SPJ4

Answer:

it would take longer to boil on top of a mountain because the water is not as hat

Answer:

hm provably and a couple of duty 2 and a couple

Explanation:

and one of the most important and most likely one of the rings was a little bit more of the first pack gives 99 of

Before knowing, what is energy of electron, we should know how is energy added to electron if it goes to higher levels.

Atom jumps from a ground state to any excited state by taking the energy from its surroundings and this process is called absorption.

Electron absorbs the energy and jumps to the higher energy level.

Whereas in the reverse process, emission happens i.e. the electron returns to the ground state by releasing the extra energy which was absorbed while excitation.

Electron present in the first energy level, it must have exactly -13.6 eV of energy.

The formula to find out the energy of electron at nth orbit is mentioned in the figure.

To know more about electron:

brainly.com/question/1255220

#SPJ4