Heat made from compound 1 are kinetically controlled, whereas those made from benzaldehyde are not. The fluid concentration for liposomes that vaporize at 20 mL is 0.1 mm.
What alteration to the experimental setup will produce quantifiable heat differences and Estimate K1?What alteration to the experimental setup can produce quantifiable heat variations and Kapp > K1 Dilute each and every solution. Compound 1 should be present at higher concentrations in both titrations.
Which experimental method is used to assess heat exchange quantitatively?Assessment of Heat Flow
Calorimetry is a method that we can employ to gauge how much heat is generated during a chemical and physical process. The quantity of heat that is transported from or to a substance is measured using calorimetry. As a result, the heat.
To know more about Heat visit :
https://brainly.com/question/9307612
#SPJ4
Determine the electron geometry (eg) and molecular geometry (mg) of the underlined atom CH3OCH3.
Answer options:
eg=trigonal bipyramidal, mg=tetrahedral
eg=linear, eg=linear
eg=tetrahedral, mg=tetrahedral
eg=tetrahedral, mg=bent
eg=octahedral, mg=square planar
Electron geometry (eg) = tetrahedral and molecular geometry (mg) = tetrahedral, is correct option for given question.
What is the geometry of the molecule?The organization of atoms in a molecule in three dimensions is known as molecular geometry, commonly referred to as the molecular structure. A compound's polarity, reactivity, state of matter, colour, magnetism, and biological activity can all be determined by knowing its molecular structure.
What distinguishes molecular geometry from electron geometry?Molecular geometry is the configuration of atoms within a molecule, typically in relation to a single center atom. Electron geometry is the configuration of the electron pairs around with a central atom.
To know more about molecular geometry visit :
https://brainly.com/question/29833249
#SPJ4
A ga occupie a volume of 400cm³ at 500k and 1 atmophere preure. What will be the temperature of the ga when the volume and preure of the ga i 100cm³ and 0. 5 atmophere repectively
The temperature will be 62.5K when the volume and pressure of the ga 100cm³ and 0. 5 atmosphere.
What is stated by the combined gas law?The ratio of the product of the original pressure and volume to the original temperature will equal the ratio of the product of the new pressure and volume to the new temperature, or, according to a commonly used version of the combined gas law.
What are the three gas laws?According to Boyle's Law, gas volume grows as pressure lowers. According to Charles' Law, a gas expands in volume as its temperature rises. Additionally, Avogadro's Law states that as the number of gases increases, so does the volume of the gas.
From the combined gas law equation:
p1V1/T1 = p2V2/T2
where p1 - initial pressure, V1 - initial volume, T1 - initial temperature, p2 - final pressure, V2 - final volume, T2 - final temperature.
T2 = p2V2T1 / p1V1
As a result:
T2 = (0.5 atm × 100 cm3 × 500 K) / (1 atm × 400 cm3) = 62.5 K
T2 = 62.5 K
To know more about gas law visit:
https://brainly.com/question/13154969
#SPJ4
for cis-1,3-dimethylcyclohexane, which structures represent the possible boat conformations?
The two possible boat conformations of cis-1,3-dimethyl cyclohexane are the A) chair-boat and D)the twist-boat conformations.
The chair-boat conformation of cis-1,3-dimethyl cyclohexane has two methyl groups in the equatorial positions and two hydrogens in the axial positions. This conformation occurs when the molecule is twisted about 120° from the chair conformation.
The twist-boat conformation is similar to the chair-boat conformation, except the twist is greater than 120°. In the twist-boat conformation, the two methyl groups are in the axial positions while the two hydrogens are in the equatorial positions.
Both of these conformations are stabilized by the intramolecular hydrogen bonding between the hydrogen and the methyl group. This hydrogen bonding helps to reduce the overall strain within the molecule, allowing the molecule to exist in either of these stable conformations.
For more questions like Boat conformations click the link below:
https://brainly.com/question/30261060
#SPJ4
mixtures typically melt at different temperatures than the pure substances they are composed of. brass is a mixture composed of copper and zinc, and it melts at temperatures between 820 degrees celsius ( oc) and 1030 degrees celsius ( oc). why might different samples of brass melt at different temperatures?
Different samples of brass may melt at different temperatures due to variations in their composition. Impurities or other trace elements present in the brass can also affect the melting point.
Which metal is the easiest to melt?The metal which is easiest to melt and has a low melting point is mercury. Mercury has the lowest melting point reaching in at -39 C, while on the other hand aluminium alloys melt at 463-671 C.
What are the main uses of brass?Brass is still mainly used in applications where there is need of corrosion resistance and low friction. It is used in locks, zippers, plumbing, valves, and electrical plugs and sockets. It is used vastly in making of some musical instruments also.
To know more about metals, visit here:
https://brainly.com/question/28650063
#SPJ4
a compound is found to contain 53.70% iron and 46.30% sulfur. Find The Empirical Formula Of A Compound Containing 53.70% Iron And 46.30% Sulfur
Fe2S3 is The Empirical Formula Of A Compound Containing 53.70% Iron And 46.30% Sulfur.
Fe = 0.961 mol and S = 1.44 mol, Now divide them to get lowest empirical formula. When the subscripts in a chemical formula represent the simplest ratio of the kinds of atoms in the compound, the formula is called an empirical formula.
Most ionic compounds are described with empirical formulas. A molecular formula describes the actual numbers of atoms of each element in a molecule. A compound that contains ions and is held together by ionic bonds is called an ionic compound. The periodic table can help us recognize many of the compounds that are ionic:
When a metal is combined with one or more nonmetals, the compound is usually ionic. This guideline works well for predicting ionic compound formation for most of the compounds typically encountered in an introductory chemistry course. However, it is not always true (for example, aluminum chloride, AlCl3, is not ionic).
To know more about empirical formula here
https://brainly.com/question/1439914
#SPJ4
12
(e) Ethane-1. 2-diol has two alcohol functional groups.
H H
H-0-C-C-0-H
Η Η
One molecule of ethane-1,2-diol will react with two molecules of ethanoic acid to form
molecule X
X has two ester functional groups and a molecular formula of CHO
(i) State the empirical formula of X.
[1]
The stated assertion implies that X has the empirical formula C₃H₅O₂ since ethane-1, 2-diol has eight drinking functional groups.
How is a molecule created?When five or more atoms come together and establish bonds with one another, a molecule is created. When two atoms link together, they share a single electron. A molecule is created as a result of a covalent connection.
What makes water a molecule?Because it has molecular bonds, water is a molecule. Water is a compound as well since it contains several different types of elements (oxygen and hydrogen). You might claim that water is really a type of molecule if you want.
To know more about Molecules visit:
https://brainly.com/question/26044300
#SPJ4
if your water heater can supply 40 kbtu/h (thats kilo-btu/h), how long will it take to heat this water?
If a water heater can supply 40 KBTU/h then it will take 35.64 second to heat the water. This is calculated using the specific heat of water and the power concept.
The electrical energy is used totally depends on the total power used by all the electrical devices and the total time they are used. One kilowatt hour is equal to 1000 watts of power used for one hour of time.
time taken= energy required/ power delivered
System is used to define the measurement of a physical quantity. It is termed as the unit. Different types of unit measurement systems used are the SI unit system, MKS unit system, Imperial unit system, British unit system, etc.
1 BTU = 1055.6 J
Specific heat of water Cw. = 4186 J/Kg.
Time taken = energy required / power
= 100 . Cw. / 1055.6 * 40*
= 100 * 4186 / 1055.6 * 40 .
= 9.9 * hours
= 35.64 sec
To learn more about specific heat please visit:
https://brainly.com/question/27991746
#SPJ4
true or false: the exponents in a rate law are always equal to the coefficients in a balanced chemical reaction.
The give statement that the exponents in a rate law are always equal to the coefficients in a balanced chemical reaction is false.
What is reaction rate?Reaction rate is the rate at which a chemical reaction moves forward. It is frequently described in terms of either the concentration of a reactant that is consumed in a unit of time or the concentration of a product that is generated in a unit of time (amount per unit volume).
The exponents in a rate law, which describe the dependence of the reaction rate on the concentrations of the reactants, are determined experimentally and may not be equal to the coefficients in the balanced chemical equation for the reaction.
To know more about Balanced chemical reactions, visit:
https://brainly.com/question/15355912
#SPJ4
Consider the following isomerization reactions of some simple sugars and values for their standard Gibbs free energy ΔG∘:reaction A:reaction B:glucose-1-phosphatefructose-6-phosphate⟶⟶glucose-6-phosphate,glucose-6-phosphate, ΔG∘=−7.28 kJ/mol ΔG∘=−1.67 kJ/molPart ACalculate ΔG∘ for the isomerization of glucose-1-phosphate to fructose-6-phosphate.
Figures for such simple sugars' esterification reactions with That is -5.61 kj/mol and the typical Kinetic free energy "G" reaction.
What are free energy of Gibbs and entropy?Entropy is a unit of measurement for the amount of heat that diffuses or is communicated during a chemical reaction. How is it has said Gdp energy is free? Gibbs energy is frequently referred as as inspiration and self to initiate a chemical reaction and is evaluated at constant pressure and temperature.
Gibb's spontaneous energy is often called free energy because it is always available. The reaction can acquire this energy if necessary without making any effort. To calculate the variance in Gibb's free energy, hysteresis and the system's total heat and entropy are added.
To know more about energy Visit:
https://brainly.com/question/1932868
#SPJ4
What is the Lewis symbol for Be2+? Select the correct answer below: :Be2+ :Be2+ Be2+ Be2+
The Lewis symbol for Be2+ is Be2+.
Beryllium is a neutral element that means the no. of electron sand no. of protons they are same. It has two valence electrons. Be lost two negative charges. They will lose two electrons. Be having most stable electronic configuration.
Beryllium is a steel gray metal which is quite brittle at a room temperature, and its chemical properties somewhat resemble with aluminum. They do not occur in a free nature. Be are used in many industries like; Ceramic manufacturing, automotive as well as areospace. Be is a group 1 carcinogen. It is a divalent element which occurs naturally only in combination with the other elements to form a mineral.
To know more about symbol here
https://brainly.com/question/13868256
#SPJ4
what amount of heat is required to convert 10.1 g of an unknown liquid that has a molar mass of 83.21 g/mol at 19.2 celcius to a gas at 93.5 degrees celcius. the specific heat capacity of the liquid is 1.58 j/g celcius. specific heat capacity of gas
The amount of heat is required to convert 10.1 g of an unknown liquid that has a molar mass of 83.21 g/mol to a gas is found to be 3680 J.
How do you figure out how much heat is needed to turn a liquid into a gas?1. The amount of energy needed to increase a liquid's temperature from 19.2° to 57.3°. q = mCT q = heat =? m = mass = 10.1 g C = specific heat of liquid = 1.58 J/go
T = temperature change = 57.3 - 19.2 = 38.1 o q = (10.1 g) (1.58 J/go) (38.1 o) = 608
2. The temperature needed to turn a liquid into a gas at 57.3 degrees (phase change)
q = m
Hvap = enthalpy of vaporisation = 22.5 kJ/mol x 1 mol / 83.21 g = 0.2704 kJ/g = 270.4 J/g q = (10.1 g)(270.4 J/g) = 2731 J. Hvap = heat =? m = mass = 10.1 g
3. The amount of heat needed to increase the gas' temperature from 57.3° to 93.5° q = mCT q = heat =? the gas's specific heat is 0.932 J/go and the mass is 10.1 g. T = temperature change = 93.5o - 57.3o = 36.2o q = (10.1 g)(0.932 J/go)(36.2o) = 341 J
4. To determine the overall amount of heat required, add the heats from each step.
608 J + 2731 J + 341 J = 3680 J
By specific heat, what is meant?One gramme of a substance's temperature can be raised by one degree Celsius by applying a certain amount of heat, or specific heat. Calories or joules per gramme per degree Celsius are frequently used as the units of specific heat. For instance, water has a specific heat of 1 calorie (or 4.186 joules) per gramme per degree Celsius.
Learn more about specific heat here:
brainly.com/question/11297584
#SPJ4
What amount of heat (in kJ) is required to convert 10.1 g of an unknown liquid (MM = 83.21 g/mol) at 19.2 °C to a gas at 93.5 °C? (specific heat capacity of liquid = 1.58 J/g･°C; specific heat capacity of gas = 0.932 J/g･°C; ∆Hvap = 22.5 kJ/mol; normal boiling point, Tb = 57.3°C)
a 50.0 ml sample of koh is titrated with a o.8186 m hcl solution. the titration requires 27.87 ml of the hcl solution to reach the equivalence point. what is the moarity of the koh solution?
The molarity of the KOH solution is 0.46 M
A titration is a technique where a solution of known concentration is used to determine the concentration of an unknown solution. For titration procedures, it is important to determine the chemical reaction involved. For this problem, the reaction would be:
KOH + HCl = KCl + H2O
We calculate as follows:
0.02787 L ( 0.8186 M ) ( 1 mol KOH / 1 mol HCl ) = 0.0228 mol KOH
MOlarity =moles of solute / liters of solution
Molarity = 0.0228 / 0.05
Molarity = 0.46 M KOH
To look more about molarity click here
brainly.com/question/8732513
#SPJ4
why do you think the molecular geometry and bond angle for these molecules (ch4, nh3, and h2o) are different even though they have the same amount of total electron groups?
This is because of the variation in lone pairs CH4 has no lone pair [Tetrahedral], NH3 has 1 lone pair[Pyramidal], H2O has 2 lone pair[Bent].
What is bond angle?A complex molecule's or ion's bond angle is the angle between both the two bonds, or the angle between two orbitals that contain bonding electron pairs surrounding the central atom. It is computed using a spectroscopic approach and expressed in degrees.
What affects bond angle?There are several common aspects to take into account, including the size of the involved atoms, the presence of lone pairs, numerous bonds, big groups connected to the core atom, and the environment the molecule is situated in.
To know more about bond angle visit :
https://brainly.com/question/29573784
#SPJ4
beryllium fluoride is an ionic compound with the following formula: bef2 what are the charges of beryllium (be) and fluorine (f) ions in this compound?
The beryllium ion has a charge of +2 and the fluorine ion has a charge of -1.
What is fluorine?Fluorine is a chemical element on the periodic table with an atomic number of nine and a symbol of F. It is the most reactive of all elements, and is the only element that forms compounds with all other elements. It is a pale yellow gas with a pungent odor. It readily forms compounds with most metals and nonmetals, and is found in many minerals. Fluorine is used in industries such as glass, ceramics, and aluminum production. It is also used to produce uranium fuel for nuclear power plants. Fluorine is widely used in toothpaste, mouthwash, and other dental products to prevent tooth decay.
To learn more about fluorine
https://brainly.com/question/15045637
#SPJ4
Which of the following could be the identity of a white crystalline solid that exhibits the following properties?-It melts at 320°C.-It does not conduct electricity as a solid.-It conducts electricity in an aqueous solution.C6H12O6(s)NaOH(s)SiO2(s)Cu(s)
The white crystalline solid which exhibits a melting point at -320°C and will not conduct electricity is NaOH
Manufacturers can use sodium hydroxide to make soap, rayon, paper, explosive products, dyes, and petroleum products. Other jobs where sodium hydroxide can be used include processing cotton cloth, cleaning and processing metals, oxide plating, electroplating, and electrowinning. Many metal hydroxides such as LiOH, NaOH, KOH, and Ca(OH)2 are bases. Non-metallic hydroxides like hypochlorous acid (HOCl) are acids.
Properties of sodium hydroxide
Sodium hydroxide in its pure form is a white crystalline solid. Odorless.Soluble in water, glycerol, and ethanol. ...It has a higher viscosity than water, about 78 mPas.Multiple hydrates can be formed.Learn more about the crystalline solid in
https://brainly.com/question/28274778
#SPJ4
a 15.0-g sample of nitrogen is burned in excess oxygen. the result is a single gas with a mass of 49.3 grams. what is the empirical formula of the gas? group of answer choices
When a 15.0-g sample of nitrogen is burned in excess oxygen. Which result is a single gas with a mass of 49.3 grams. the empirical formula of the gas is NO2.
What is a Nitrogen?The chemical element with the atomic number 7 and the letter N is known as nitrogen. The lightest element in group 15 of the periodic table, often termed as the pnictogens, nitrogen is a nonmetal. It is a typical element in the cosmos, believed to be eighth in the Milky Way and the Solar System in terms of overall abundance.
Nitrogen has the following general specifications:Symbol: NAtomic number: 7Atomic mass: 14.0067 uElectrons per shell: 2,5Electron configuration: [He] 2s22p3Discoverer: Daniel RutherfordChemical series: Nonmetal, Pnictogen, Period 2 elementTo know more about Nitrogen visit
https://brainly.com/question/12456967
#SPJ4
At 850 K the equilibrium constant for the following reaction is Kc = 15 M-1.
2SO₂(g)+O₂(g)⇌ 2SO₃(g)
If we mix the following concentrations of the three gases, predict in which direction the net reaction will proceed toward equilibrium.
Left
No Change
Right
(SO₂)=0.20 M
O₂ = 0.60 M
(SO₃)=0.60 M
(SO₂)=0.18 M
O₂ = 0.10 M
(SO₃)=0.50 M
(SO₂)=0.70 M
O₂ = 0.80 M
(SO₃)=0.13 M
Chemical Equilibrium:
A chemical equilibrium is the reversible state of a chemical reaction system in which the concentrations of reactants and products do not change significantly with time. This state has a constant "K" dependent on temperature and the concentrations present at equilibrium. The reaction quotient "Q" is determined the same way but is for concentrations away from equilibrium. The relation between "K" and "Q" is an indicator in which way the reaction will proceed towards equilibrium.
When the reaction moves to the right to reach the chemical equilibrium, which is represented by the equation 2 SO2(g) + O2(g) 2 SO3(g) Kc=15, O2 = 0.80 M will be present.
What is an illustration of chemical equilibrium?is a condition in which the forward reaction rate is equal to the backward reaction rate. "A state where the concentration of reactant and product remains constant" is another definition of OR. For instance, H2(g)+I2(g)HI (g).
What does GCSE chemical equilibrium entail?When anything is said to be in equilibrium, it refers to a balanced state. It describes a state in chemistry when the concentrations of the reactants and products are stable. Equilibria, the plural form of the word, is used to describe the study of concentrations in chemical reactions.
To know more about chemical equilibrium visit:
https://brainly.com/question/3920294
#SPJ4
classes of hydrocarbons in the most reactive
HOPE IT HELPS
MARK AS BRAINLIEST
The level of water in an olympic size swimming pool (50.0 meters long, 25.0 meters wide, and about 2.00 meters deep) needs to be
lowered 1.50 cm. if water is pumped out at a rate of 4.60 liters per second, how long will it take to lower the water level 1.50 cm?
Olympic size: At a rate of 4.60 liters per second, it would take 543,478.2608 seconds (or about 6.5 days) to remove 2.50 m^3 of water.
What is Olympic?The Olympic Games are a major international multi-sport event featuring both summer and winter sports, held every four years. The modern Olympic Games were first held in Athens, Greece in 1896. The International Olympic Committee (IOC) organizes the Games and oversees the host cities. As the premier global sporting event, the Olympics feature more than 200 nations participating in a wide variety of sports
The volume of an Olympic size swimming pool is 50.0 m x 25.0 m x 2.00 m = 2500 m^3. To lower the water level by 1.50 cm, we need to remove a volume of 2.50 m^3 (1.50 cm/100 cm x 2500 m^3).
At a rate of 4.60 liters per second, it would take 543,478.2608 seconds (or about 6.5 days) to remove 2.50 m^3 of water.
To learn more about Olympic
https://brainly.com/question/30052350
#SPJ4
natasha wrote a table comparing pure substances and mixtures. what correction should be made to natasha's table? a elements and compounds are considered mixtures. b pure substances can be separated using physical means. c mixtures contain at least three or more substances. d mixtures are substances that are not chemically combined.
No correction is required in table of pure substances and mixtures.
A mixture contains further than one chemical substance, and thus isn't pure. The substances in a mixture can be rudiments, composites, or both.
Pure substances can be separated using physical means. rudiments and composites are considered fusions. fusions are substances that aren't chemically combined. fusions contain at least three or further substances
A mixture is a physical combination of two or further substances. These aren't combined chemically. The factors retain their individual properties indeed after forming a mixture.
Learn more about fusion visit:
brainly.com/question/29227396
#SPJ4
three moles of an ideal monatomic gas are at a temperature of 345 k. then, 2438 j of heat is added to the gas, and 962 j of work is done on it. what is the final temperature of the gas?
The final temperature of gas is approximately 436 K . if three moles of an ideal monatomic gas are at a temperature.
What are monatomic atoms?Monoatomic (monatomic): A molecule composed of just one atom, and lacking any covalent bonds. The noble gases (He, Ne, Ar, Kr, Xe, and Rn) are all monoatomic, whereas most other gases are at least diatomic.
What is monatomic or diatomic?Complete answer: Monatomic gas is the gas that has molecules containing a single atom only while diatomic gas has the molecule containing two atoms. Similarly, triatomic gas contains molecules with three atoms. The hydrogen gas exists as a diatomic molecule, as it contains two atoms of hydrogen.
To know more about monatomic visit
https://brainly.com/question/9384283
#SPJ4
Calculate E∘cell for the balanced redox reaction.
PbO2(s)+4H+(aq)+Sn(s)→Pb2+(aq)+2H2O(l)+Sn2+(aq)
E°cell for the balanced redox reaction is -0.531 V.A redox reaction can be defined as a chemical reaction in which electrons are transferred between two reactants participating in it.
How is an EO cell calculated?Calculating E° cells given K either K provided Eo cell can both be done using this equation. The following formula can be utilized if the RT is constant and the temperature is 298 K: Find the empirical formula (K) for the reaction using F o (0.025693V/n) and K is -0.34V.
PbO2 (s) + 4 H+ (aq) + Sn (s) --> Pb2+ (aq) + 2 H2O (l) + Sn2+ (aq) AI Recommended
How can E° cell be calculated using common reduction potentials?Using E° cell table, calculate the E° readings using the conventional reduction potentials. Identify E°cell as E°cathode - E°anode in step 4. Step 5: We can use G = -nFE°cell after calculating E° cell and determining the amount of moles of electrons.
To know more about A redox reaction can be defined as a chemical reaction in which electrons are transferred between two reactants participating in it.
To know more about redox reaction visit:
https://brainly.com/question/13293425
#SPJ4
If the ph of a solution is increased from ph 5 to ph 7, it means that the?
If the pH of a solution is increased from pH 5 to pH 7, it means that the solution has become more alkaline. The pH scale ranges from 0 to 14, with 7 being neutral, less than 7 being acidic, and greater than 7 being basic or alkaline.
A pH increase from 5 to 7 means that the concentration of hydroxide ions in the solution has increased, leading to a higher level of basicity.
A change in pH can have significant impacts on the chemical and biological systems that the solution interacts with. For example, a change in pH can alter the solubility of certain substances, alter the activity of enzymes, or affect the growth and behavior of microorganisms. It is important to carefully control the pH of solutions in various applications, such as in food and beverage processing, pharmaceutical manufacturing, and environmental management.
Find out more about pH
brainly.com/question/10954432
#SPJ4
Explain why the Vmax of the reaction is much lower with non-competitive inhibitor than reaction without inhibitor or with competitive inhibitor at high substrate concentrations.
The Vmax of the reaction is much lower with non-competitive inhibitor than reaction without inhibitor or with competitive inhibitor at high substrate concentrations because of noncompetitive inhibitor can only bind to an enzyme with or without a substrate at several places at a particular point in time
The substrate still binds to the enzyme in the presence of noncompetitive inhibitors. In fact, the binding of the substrate and inhibitor to the enzyme is completely unaffected by one another. The enzyme, however, is unable to catalyze the reaction to produce a product when the inhibitor is attached. Noncompetitive inhibition works by lowering the quantity of active enzyme molecules available to carry out a process.
In non-competitive inhibition, a different site on the enzyme is the spot where the inhibitor molecules interact with the substrate molecules rather than the active sites on the enzyme surface. As a result, there are less enzyme molecules available to catalyze the reaction. Thus, V m an x is decreased. Because of this, extra substrate cannot entirely overcome the non-competitive inhibitors. As a result, the reaction's V max decreases.
Learn more about non-competitive inhibitor at https://brainly.com/question/15906288
#SPJ4
what will the concentration of cd2+ at the moment before fe2+ begins to precipitate?
Express the molar concentration numerically.
Before starting the titration, add a little quantity of Fe3+ to that same analyte's solution. any test curve that coincides with the concentration change.
What does an element's concentration mean?The amount of solute contained in a specific amount of solution is the substance's concentration. The number of molecules or solute throughout 1 L of solution, or molarity, is used to express concentrations. Thus, [Kr]4d10 [K r] 4 d 10 would represent the condensed subsurface electronic structure of Depth comprehension+ C d 2 +. We can see from the diagram of something like the neutral cadmium molecule above that even after the removal of the 5s electrons, all of the remaining orbitals are still occupied with 2 electrons.
What does solution concentration mean?A It is a measurement of the amount of one substance is diluted with another. This can be used to describe any kind of compound, but it's most usually used to describe solutions, where it relates to how much solute has been dissolved in what seems like a solvent.
To know more about electrons visit :
https://brainly.com/question/28977387
#SPJ4
valency of all elements
Answer:
Number Valency
Valency of Hydrogen 1 1
Valency of Helium 2 0
Valency of Lithium 3 1
Valency of Beryllium 4 2
Valency of Boron 5 3
Valency of Carbon 6 4
Valency of Nitrogen 7 3
Valency of Oxygen 8 2
Valency of Fluorine 9 1
Valency of Neon 10 0
Valency of Sodium (Na) 11 1
Valency of Magnesium (Mg) 12 2
Valency of Aluminium 13 3
Valency of Silicon 14 4
Valency of Phosphorus 15 3
Valency of Sulphur 16 2
Valency of Chlorine 17 1
Valency of Argon 18 0
Valency of Potassium (K) 19 1
Valency of Calcium 20 2
Valency of Scandium 21 3
Valency of Titanium 22 4
Valency of Vanadium 23 5,4
Valency of Chromium 24 2
Valency of Manganese 25 7, 4, 2
Valency of Iron (Fe) 26 2, 3
Valency of Cobalt 27 3, 2
Valency of Nickel 28 2
Valency of Copper (Cu) 29 2, 1
Valency of Zinc 30 2
the three states of matter are solid, liquid, and gas. in which state does matter take up the most volume? a. they all take up the same volume. b. in the gas state c. in the liquid state d. in the solid state
We are know that gas takes the shape of the container it is kept in. As a result, matter occupies the largest volume in the gaseous state.
What do you mean by matter?Matter is anything that occupies space and has mass, in other sense, matter is the "something" from whichthe universe is formed. The fundamental building components of all stuff are called elements. They don't change into the other elements through normal chemical processes and have distinct chemical and physical properties.
State of matter.The 3 states of matter include solid, liquid, & gas. It is possible to comprehend why they have various qualities by looking at the arrangement of their particles.
To know more about matter visit :
https://brainly.com/question/28945834
#SPJ4
Match the following.
drag the appropriate labels to their respective targets. note: not all labels will be used.
Ionic Bond Lil =
hydrogen bonding CH3OH =
ion-dipole forces CH3CH3 =
H2 + H20 CH2F2 =
dispersion forces Lil + H20 =
dipole-dipole forces
LiI consists of ionic bond, CH3OH contains hydrogen bond, CH3CH3 contains London dispersions forces, CH2F2 has both dipole-dipole and London dispersion forces and Lil + H20 consists of ion-dipole forces.
Ionic bonds are seen in molecules made primarily of metallic materials. When an ionic molecule is dissolved in a polar solvent, such as the solution, ion-dipole forces are at play. It is noticed between polar molecules and charged ions. The strongest intermolecular link between atoms is the hydrogen bond, which can form between O, N, or F. Polar molecules have dipole-dipole forces but lack O-H, N-H, or F-H bonds. All molecules experience London dispersion, which is only seen in nonpolar molecules.
To learn more about hydrogen click here https://brainly.com/question/11837837
#SPJ4
A) 2Fe3+(aq)+3Sn(s)->2Fe(s)+3Sn2+(aq)
B) O2(g)+2H2O(l)+2Cu(s)->4OH-(aq)+2Cu2+(aq)
C) Br2(l)+2I-(aq)->2Br-(aq)I2(s)
Calculate the equilibrium constant for each of the reactions at 25 degrees celcius
*Express your answer using one significant figure.
K=?
0.14-0.036) x 6 = 0.624 0.624/.0592 = 10.54054054 At 25 degrees Celsius, each reaction's equilibrium constant is 1010.54054.
What does Celsius stand for?Degree (Celsius) (Celsius) Temperature measurements are frequently made using the degree Celsius. Celsius degrees are represented by the sign °C. The freezing and boiling points of water are used to form the Celsius scale, with 0°C and 100°C respectively.
What makes degrees Celsius so special?It bears the name Celsius in honor of the Swedish scientist Hans Celsius (1701–1744), who initially proposed the temperate scale in 1742. The estate's Latin name, celsus, which means "mound," became the surname.
To know more about degrees Celsius visit:
https://brainly.com/question/29634856
#SPJ4
0.14-0.036) x 6 = 0.624 0.624/.0592 = 10.54054054 At 25 degrees Celsius, each reaction's equilibrium constant is 1010.54054.
What makes degrees Celsius so special?It bears the name Celsius in honor of the Swedish scientist Hans Celsius (1701–1744), who initially proposed the temperate scale in 1742. The estate's Latin name, celsus, which means "mound," became the surname.
A) (0.14-0.036) x 6 = 0.624
0.624/.0592 = 10.54054054
10^10.54054054 = 3.47 x 10^10 or 3.0 x 10^10 .
B) (.40-.34) x 4 = .24
.24/.0592 = 4.054054054
10^4.054054054 = 1.13 x 10^4 or 1.0 x 10^4 .
C) (1.09-.54) x 2 = .55
.55/.0592 = 18.58108108
10^18.58108108 = 3.81 x 10^18 or 4.0 x 10^18 .
To know more about degrees Celsius visit:
https://brainly.com/question/25936097
#SPJ4
Which of the following nuclear processes results in an increase in the number of neutrons in the product element? 1. Alpha emission II. Beta emission III. Positron emission IV. Electron capture O A) III and IV O B) II, III, and IV OC) | and II O D) I, II, III, and IV OE) I, II, and I
The atomic number of an element increases as a result of beta decay, where one of the neutrons in the nucleus abruptly transforms into a proton.
What are nuclear reactions?Atoms occasionally transform abruptly into whole other atoms without prior notice since they aren't content with being who they are. Nuclear reactions, which transform one nucleus into another nucleus, are based on this inexplicable shift from one sort of element into another. Nuclear reactions take place when the ratio of protons and neutrons in an atom's nucleus changes, much way chemical reactions do when molecules exchange electrons, transforming one compound into another.Protons can sometimes be forced out of the nucleus or transformed into neutrons in certain nuclear processes.When an element's atomic number (number of protons) changes, so does its name since we determine what it is called by looking up the element's number on a periodic table and then reading off its name. Since an atom of potassium (atomic number 19) can abruptly change into an atom of calcium, nuclear processes resemble alchemy in this regard (atomic number 20). We'll discuss more about the radiation discharge in a moment, but that is the only indication that anything has changed.To Learn more About beta decay refer To:
https://brainly.com/question/13174032
#SPJ4
