Relationships between corporation and environmental non-governmental organizations (NGOs) must be one of collaboration and accountability. Companies should actively engage with NGOs, to seek their input and work together to address environmental issues.
NGOs need to hold companies accountable for their environmental impact, advocate for sustainable practices, and value and support companies that demonstrate a genuine commitment to protecting the environment.
By fostering a collaborative and transparent relationship, both companies can drive positive change and contribute to a more sustainable future.
Overall, a cooperative and constructive relationship between corporations and NGOs can help to create synergies, enhance sustainability, and contribute to a healthier environment.
To learn more about NGOs:
https://brainly.com/question/30243674
#SPJ4
Using evidence from climate data in Malaysia, discuss how the parameters of temperature, rainfall and humidity have changed significantly nowadays. (20 mark) 1 2. Based on the evidence of fog, rain, wind and natural phenomena that can be associated with a location in Malaysia, discuss the influence of air mass divider (front) that can affect the formation of fog, rain, wind and natural phenomena.
The air mass divider, or front, is a major factor in the formation of fog, rain, wind and other natural phenomena in Malaysia. A front is a boundary between two air masses of different temperatures, humidity, and pressure.
When a warm air mass meets a cold air mass, the warm air rises and the cold air sinks, creating a front. This front can cause a variety of weather conditions, such as fog, rain, and wind. Fog is a common occurrence in Malaysia, and is often caused by a front. When the warm air rises, it cools and condenses, forming a layer of fog. Rain is also a common occurrence in Malaysia, and is often caused by a front.
The warm air rises, cools, and condenses, forming clouds. When the clouds become saturated, they release rain. Wind is also a common occurrence in Malaysia, and is often caused by a front. The warm air rises, creating an area of low pressure. This low pressure area then draws in the surrounding air, creating wind.
know more about humidity here
https://brainly.com/question/30672810#
#SPJ11
The lithosphere is made up of a. the asthenosphere and the crust b. the uppermost mantle and the crust, both continental and oceanic c. the continental crust d. \( a \) and \( b \)
The lithosphere is made up of the "asthenosphere and the crust" and "the uppermost mantle and the crust". Both options a and b are correct.
The lithosphere, which constitutes the rigid outer layer of the Earth, is comprised of two main components. Firstly, it includes the asthenosphere, a semi-fluid layer located in the upper mantle. The asthenosphere is characterized by its ability to flow and deform over long periods of time. Secondly, the lithosphere encompasses the crust, which is the outermost layer of the Earth.
This crust can be further divided into two types: continental crust and oceanic crust. Thus, the lithosphere consists of the asthenosphere and the crust, as well as the uppermost mantle and the crust, encompassing both continental and oceanic crust.
Learn more about lithosphere here:
https://brainly.com/question/454260
#SPJ4
To determine the distance to the globular cluster, you need to use the magnitude-distance formula:
D = 10(m − M + 5)/5
We can use the figure below to estimate the absolute magnitude of the RR Lyrae star.
A graph shows the average brightness of variable stars plotted against their periods of pulsation. Three types of stars are represented: RR Lyrae stars, Type I (classical) Cepheids, and Type II Cepheids.
Based on the figure,
M =
Use the given average apparent magnitude to solve for the distance (in kpc).
D = 10(m − M + 5 )/5
D = kpc
To solve for the distance to the globular cluster using the magnitude-distance formula, we need the absolute magnitude (M) of the RR Lyrae star.
However, the figure representing the average brightness of variable stars plotted against their periods of pulsation does not provide the specific absolute magnitude of the RR Lyrae star.
Without that information, we cannot calculate the distance to the globular cluster using the given formula. We would need additional data or a different approach to determine the absolute magnitude and subsequently calculate the distance in kiloparsecs (kpc).
Learn more about magnitude here
https://brainly.com/question/31981097
#SPJ4
Imagine there is a star with several orbiting planets. Would it be easier for us to discover all the planets if they all lie in the same plane (e.g. orbit around the equator of the star) or if they were in random orbits around the star?
It would be easier for us to discover all the planets if they all lie in the same plane. This is because when planets orbit in the same plane, they will all have similar orbital periods, which makes it easier to detect them.
Additionally, when planets are in the same plane, they will all have similar orbital inclinations, which makes it easier to detect them as well. Furthermore, when planets are in the same plane, they will all have similar orbital eccentricities, which makes it easier to detect them.
Finally, when planets are in the same plane, they will all have similar orbital distances, which makes it easier to detect them. All of these factors make it easier for us to discover all the planets if they all lie in the same plane.
know more about orbital periods here
https://brainly.com/question/31543880#
#SPJ11
What is the proper temperature range for most cuttings to root? O 80-90 F O 30-45 F O 65-78 F O No answer text provided. What is a "Callus"? O The scar tissue that forms at the base of the cutting O Nodules that form on the roots of cuttings O Bark formation on cuttings O Scar tissue that forms in the axils of cuttings
The proper temperature range for most cuttings to root is 65-78 F. A callus is the scar tissue that forms at the base of the cutting.
Correct option is D in both cases.
It is a protective layer that helps the cutting to heal and form new roots. The callus is formed when the cutting is placed in a rooting medium and the cells at the base of the cutting start to divide and form a protective layer. This layer helps to protect the cutting from infection and helps to retain moisture.
The callus also helps to provide a stable environment for the cutting to root and grow. The callus will eventually form a root system and the cutting will be ready to be transplanted into a larger pot or into the ground. The callus is an important part of the rooting process and helps to ensure that the cutting will be successful.
Correct option is D in both cases.
know more about scar tissue here
https://brainly.com/question/32965972#
#SPJ11
Because of tidal forces in the Earth-Moon system, the Earth Day is getting gradually longer by 0.0023 seconds per century. When would Earth’s rotation period be 40 hours instead of 24 hours? How many days per year would Earth have at that time?
If Earth's rotation period were 40 hours, Earth would have approximately 1.67 days per year.
To determine when Earth's rotation period would be 40 hours instead of 24 hours, we can calculate the time it would take for Earth's rotation period to double. Given that Earth's rotation is gradually lengthening by 0.0023 seconds per century, we can set up the following equation:
0.0023 seconds per century = 16 hours (change in rotation period)
To convert the change in rotation period to seconds, we multiply 16 hours by 60 minutes (to get minutes) and then by 60 seconds (to get seconds):
16 hours * 60 minutes * 60 seconds = 57,600 seconds
Now, we can set up a proportion to find the time it would take for Earth's rotation period to double: 0.0023 seconds per century = 57,600 seconds per X years
Solving for X (the number of years), we can rearrange the proportion:
X = (57,600 seconds per century) / (0.0023 seconds per year)
X ≈ 25,043,478 years
Therefore, it would take approximately 25,043,478 years for Earth's rotation period to double and become 40 hours.
Now, to calculate the number of days per year at that time, we can divide the new rotation period (40 hours) by 24 hours (the current length of a day): 40 hours / 24 hours = 1.67 days
Learn more about Earth’s rotation here:
https://brainly.com/question/16455426
#SPJ4
Explain how climate has contributed to the existence of each of the vegetation types.
Which statement about tropical cyclones is true?
a. tropical cyclones rotate counter-clockwise in the northern hemisphere
b. tropical cyclones warm up the ocean water on their passage
c. tropical cyclones rotate counter-clockwise in the northern hemisphere AND tropical cyclones warm up the ocean water on their dassage
d. tropical cyclones rotate clockwise in the northern hemisphere
e.tropical cyclones rotate clockwise in the northern hemisphere AND tropical cyclones warm up the ocean water on their passage
Tropical cyclones, also known as hurricanes or typhoons, exhibit a distinct rotation pattern based on the hemisphere in which they occur. Hence, Option (A) is correct.
In the Northern Hemisphere, tropical cyclones rotate counterclockwise. This rotational direction is a result of the Coriolis effect, which is caused by the rotation of the Earth.
The Coriolis effect deflects moving objects to the right in the Northern Hemisphere and to the left in the Southern Hemisphere.
As a result, the low-pressure systems that form tropical cyclones spin counterclockwise in the Northern Hemisphere.
Conversely, in the Southern Hemisphere, tropical cyclones rotate clockwise.
Thus, this consistent pattern of rotation has been observed and studied extensively regarding the rotation of tropical cyclones in the Northern Hemisphere.
Learn more about tropical cyclones here:
https://brainly.com/question/26581127
#SPJ4
Lab tests of soil and water samples are conducted during a Phase
II Environmental Site Assessment.
T or F
The statement that Lab tests of soil and water samples are conducted during a Phase II Environmental Site Assessment is true.
What is Phase II Environmental Site Assessment?While a Phase II evaluates if pollution is actually present, a Phase I largely determines the chance that a place is polluted by visual observations, historical use studies, and regulatory data.
Geologists dig and collect soil, soil vapor, and groundwater as part of a Phase 2 Environmental Site Assessment or Phase II Environmental report to look for pollution.
Learn more about soil at;
https://brainly.com/question/1321904
#SPJ4
Why the water saturation of shale layer is 0.
If Alert, Canada is located at about 82oN and Quito, Columbia is
located at 0o, what is the difference in insolation in January
between these two locations?
Insolation is the amount of solar radiation received by the earth per unit area.
Latitude determines the amount of insolation that an area receives as the curvature of the Earth causes different areas to receive different amounts of sunlight. If Alert, Canada is located at about 82°N and Quito, Columbia is located at 0°, the difference in insolation in January between these two locations can be explained based on the concept of insolation.
The poles receive less insolation than the equator because the radiation of the sun is distributed over a larger area of the Earth's surface.
The insolation decreases with increasing latitude because the amount of solar energy that penetrates the atmosphere decreases as the angle of incidence of the Sun's rays decreases.
To know more about radiation visit:
https://brainly.com/question/31106159
#SPJ11
Why is contact tracing important for cocid-19?
Contact tracing is an important tool for controlling the spread of COVID-19. It is a process of identifying, assessing, and managing people who have been exposed to a contagious disease.
Contact tracing involves identifying people who have been in close contact with an infected person and then monitoring and supporting them. This helps to identify new cases quickly and to prevent further spread of the virus.
Contact tracing is important because it helps to identify people who may have been exposed to the virus and to provide them with the necessary information and support. It also helps to identify potential clusters of infection and to take appropriate action to contain the spread of the virus. Contact tracing also helps to identify people who may need to be tested or isolated, and to provide them with the necessary support.
Contact tracing is an important tool for controlling the spread of COVID-19 and for protecting public health. It helps to identify new cases quickly and to prevent further spread of the virus. It also helps to identify people who may need to be tested or isolated, and to provide them with the necessary support.
know more about contagious disease here
https://brainly.com/question/5495927#
#SPJ11
Discuss the role of plate tectonics in earthquake and volcanic hazards around the globe? Using examples such as specific earthquake events and secondary hazards, or different volcano types and eruption styles, etc., discuss the connection between the global geophysical phenomon (plate tectonics) and regional or localized volcanic and/or earthquake hazards/disasters. Be sure to use appropriate terminology and concepts from your textbook, powerpoint slides, and other additional resources. Try to incorporate actual, factual scientific information and data into your discussion. Text book used is Earth Hazards.
According to the information we can infer that plate tectonics plays a significant role in the occurrence of earthquake and volcanic hazards around the globe.
What is the role of plate tectonics in earthquake and volcanic hazards around the globe?Plate tectonics plays a vital role in the occurrence of earthquake and volcanic hazards worldwide. The movement and interactions of Earth's tectonic plates create different types of plate boundaries, where most earthquakes and volcanic activities occur.
Convergent plate boundaries, where plates collide, form subduction zones leading to intense seismicity and volcanic activity, such as the Andes in South America. Divergent plate boundaries, where plates move apart, result in volcanic eruptions and earthquakes due to the upwelling of magma, as seen in Iceland. Transform plate boundaries, where plates slide past each other horizontally, exhibit intense seismic activity, exemplified by the San Andreas Fault in California.Additionally, hotspots, stationary plumes of hot mantle material, contribute to volcanic hazards, as observed in the Hawaiian Islands. The stress and pressure generated at plate boundaries and hotspots release energy in the form of earthquakes and volcanic eruptions, varying in magnitude and frequency based on specific geological conditions.
Learn more about plate tectonics in: https://brainly.com/question/16944828
#SPJ4
The states that in an undeformed sequence of rock strata, each bed is older than the one above it and younger than the one below it. Principle of Uniformitarianism Law of Superposition Principle of Original Horizontality Principle of Inclusions.Among the following radioactive parent isotopes, which is likely to be used for spocimens less than 75,000 years old? Potassium-40 Uranium-238 Rubidium-87 Carbon-14 (c)
1. The law of Superposition states that in an undeformed sequence of rock strata, each bed is older than the one above it and younger than the one below it. Hence, Option (B) is correct.
This principle is fundamental to the field of stratigraphy, which deals with the study of rock layers and their relative ages.
The Law of Superposition is based on the understanding that sedimentary rocks are formed in layers over time, with each new layer being deposited on top of the previous layers.
As a result, the lowermost layers are the oldest, while the uppermost layers are the youngest.
Thus, this principle provides a framework for determining the relative ages of different rock units and is a crucial tool in unraveling the geological history of an area.
2. Carbon-14 is the radioactive parent isotope that is likely to be used for specimens less than 75,000 years old. Hence, Option (D) is correct.
Carbon-14 is a radioactive isotope of carbon with a half-life of about 5,700 years.
Thus, making Carbon-14 is most likely used for dating organic materials within this age range through a method known as radiocarbon dating.
Learn more about the law of Superposition here:
https://brainly.com/question/12493909
#SPJ4
1. The _________________states that in an undeformed sequence of rock strata, each bed is older than the one above it and younger than the one below it. A)Principle of Uniformitarianism B) Law of Superposition C)Principle of Original Horizontality d) Principle of Inclusions.
2. Among the following radioactive parent isotopes, which is likely to be used for spocimens less than 75,000 years old? a) Potassium-40 b) Uranium-238 c) Rubidium-87 d)Carbon-14
The latest IPCC report showed that glacial and ice sheet volumes are expected to decline significantly by 2050. Discuss three impacts that this change will have on the hydrological cycle and water availability. Include impacts at different spatial (local, national, global) and temporal (months, years, etc.) scales.
The leading worldwide organization for evaluating climate change is the IPCC (Intergovernmental Panel on Climate Change). Reduced water availability, timing shifts, timing variations, and periodicity of water availability are the three effects.
Reduced water supply: As glaciers and ice sheets melt, the water supply will decrease, and as a result of climate change, we will have much less access to fresh water.
Changes in water availability timing and seasonality: Glacier retreat can alter the time of year and day when rivers that collect water from glaciers have the greatest water available.
Impacts on the availability of freshwater for irrigation: Glacier meltwater and runoff contribute to and alter downstream water flow, affecting the freshwater supply for hydropower, ecosystems, and agriculture.
Learn more about on climate change, here:
https://brainly.com/question/32532670
#SPJ4
Explain how there can be rainfall in the midlatitudes of more than one inch if there is only an inch of precipitable water in a column of the atmosphere.
Rainfall in the midlatitudes can exceed one inch even if the amount of precipitable water in the atmosphere is only an inch. This is due to the fact that the amount of rainfall is typically determined by the moisture content and the speed of the air within a region.
When a storm system passes through a region, fast moving air can bring an increased level of moisture, thus increasing the amount of rainfall that will occur. Also, raindrops tend to coalesce together to create larger drops which can contribute to increased levels of rainfall. Additionally, if a region is experiencing higher levels of evaporation, the moisture content in the air will also rise, further contributing to heavier-than-expected precipitation levels.
Through this combination of factors, it is possible to have more than an inch of rainfall in the midlatitudes when there is only an inch of precipitable water present in the air.
know more about atmosphere here
https://brainly.com/question/32358340#
#SPJ11
When an object crashes on the Moon, its velocity at the time of impact will be... Slower than the escape velocity. Faster than the escape velocity. Exactly equal to the escape velocity. How can we tell that a planet is rotating using radar? Doppler shift due to the planet's rotation causes a large range of frequencies to be reflected as a single frequency. Doppler shift due to the planet's rotation causes a single frequency to be reflected as a large range of frequencies. Doppler shift due to the planet's rotation causes a single frequency to be reflected as a different single frequency. Out of the 4 outer planets, humans have sent probes into... Only Jupiter. Jupiter and Saturn. Jupiter and Uranus.
When an object crashes on the Moon, its velocity at the time of impact will be slower than the escape velocity.
Escape velocity is the velocity required by an object to break free of the gravitational pull of the Moon. If an object is moving at a velocity slower than the escape velocity, it will crash on the Moon's surface.
If an object's velocity is equal to or faster than the escape velocity, it will escape the gravitational pull of the Moon and fly off into space.Radar is used to determine the rotation of a planet.
When radar waves strike the planet's surface, they reflect back to Earth at a frequency that is slightly different than the original frequency.
To know more about escape visit:
https://brainly.com/question/31213441
#SPJ11
A core sample has a dry "weight" of 20 g and after completely saturatedwith water has a "weight" of 22.5 g. The density of water is 1.0 gm/cm3. Bulkvolume is 9.9 cm3 .
(a) find the pore volume of the core
(b) Find the porosity of thecore
(c) Find the density of rock matrix in g/cm3
(d) Using the Table given below, determine the type of the rock to which the core may belong.
Rock Type Grain (or rock matrix) density values in g/cm3
Massive Salt 2.14
Sandstone 2.65
Limestone 2.71
Dolomite 2.88
The given question is based on the determination of various characteristics of core samples, so let's understand them one by one.
(a) Pore volume of the corePore volume is defined as the total volume of void spaces or the amount of space in a rock or soil that is not occupied by solid minerals.
Mathematically, Pore Volume = Saturated weight – Dry weightDensity of Water = 1.0 gm/cm³Saturated weight of core sample = 22.5 gDry weight of core sample = 20 gBulk Volume = 9.9 cm³Pore Volume = 22.5 g - 20 g= 2.5 g/cm³(b)
Porosity of the corePorosity of the core is defined as the ratio of the volume of void spaces to the total volume of the rock. Mathematically, Porosity = (Pore Volume / Total Volume) x 100Porosity = (2.5 / 9.9) x 100= 25.25%(c) Density of rock matrix in g/cm3Density of rock matrix is defined as the total mass of solid minerals per unit volume of rock matrix.
To know more about determination visit:
https://brainly.com/question/29898039
#SPJ11
I would like you to do some independent research about the star that you have chosen and summarize important characteristics. 1. What is the name of your star? What does its name mean? Are there other names for the star? 2. What is the surface temperature of the star and what color would it look like if viewed from Earth? 3. What is the luminosity (relative to the Sun) of the star? 4. Where does this star sit on the H-R diagram? You can draw a sketch of the diagram and place your star appropriately, or you can place it on a blank diagram, such as this one. This graph should be included with in your report. 5. Compare the star to our Sun. Is it similar? Dissimilar? In what ways? 6. Describe where the star is in its life cycle and its approximate age. For example, our Sun is in the middle of its life cycle as a main sequence star and it is approximately 4.6 billion years old. 7. How far away is your chosen star from Earth? 8. What is/are the one or two most important detail(s) or characteristic(s) about this star? Why? 9. How long it would take for someone from Earth to travel to this star. Explain your assumptions (how would the travel happen, how fast could the transporter travel?) and show all of your calculations. To prepare for this project, you will need to select one of the stars listed below: - Tau Ceti - XPersei - Sirius B - Proxima Centauri - Rigel - Deneb - Cygnus X-1 - Mizar - Mira - Wolf 359 - Eta Carinae - Algol - TRAPPIST-1
Assuming constant velocity, it would take around 6,558 years to travel from Earth to Proxima Centauri at the maximum speed achievable by the Parker Solar Probe.
I have chosen to research the star Proxima Centauri for your project. Here are the important characteristics of Proxima Centauri:
Name and Other Names: Proxima Centauri is also known as Alpha Centauri C or simply Proxima. Its name "Proxima Centauri" means "nearest (star) of Centaurus" in Latin, indicating its proximity to the constellation Centaurus.
Surface Temperature and Color: Proxima Centauri has a surface temperature of around 3,050 Kelvin (or 2,777 degrees Celsius). If viewed from Earth, it would appear reddish in color.
Luminosity: Proxima Centauri has a luminosity of about 0.17% that of our Sun, making it a relatively dim star.
Placement on the H-R Diagram: Proxima Centauri is a red dwarf star and sits on the lower-right portion of the Hertzsprung-Russell (H-R) diagram. It is located in the lower part of the main sequence, indicating that it is a low-mass and relatively cool star.
Comparison to the Sun: Proxima Centauri differs from our Sun in several ways. It is smaller and cooler, with about 12% of the Sun's mass and around 14% of its radius. Its surface temperature is also significantly lower than that of the Sun. Additionally, Proxima Centauri is a red dwarf, while the Sun is a G-type main sequence star.
Life Cycle and Age: Proxima Centauri is in the later stages of its life cycle. It is a main sequence star, but being a red dwarf, it has a much longer lifespan than stars like the Sun. The age of Proxima Centauri is estimated to be around 4.85 billion years.
Distance from Earth: Proxima Centauri is the closest known star to our solar system. It is located at a distance of approximately 4.24 light-years or about 40 trillion kilometers from Earth.
Important Characteristics: The most important characteristic of Proxima Centauri is its proximity to our solar system, making it the closest known star to Earth. This makes it a significant target for future interstellar exploration and potential colonization. Additionally, its status as a red dwarf and its relatively cool temperature make it an interesting object of study for understanding the properties and behavior of low-mass stars.
Travel Time from Earth: The travel time to Proxima Centauri greatly depends on the method of travel and the speed of the spacecraft. Assuming a constant velocity, let's consider the theoretical maximum speed achievable by a spacecraft. The current fastest man-made object, the Parker Solar Probe, travels at about 430,000 miles per hour (690,000 kilometers per hour).
Given the distance to Proxima Centauri as 4.24 light-years, which is approximately 24.7 trillion miles (39.7 trillion kilometers), we can calculate the travel time.
Distance = Speed × Time
24.7 trillion miles = 430,000 miles/hour × Time
Solving for Time:
Time = 24.7 trillion miles / 430,000 miles/hour
Time ≈ 57.4 million hours or approximately 6,558 years
Therefore, assuming constant velocity, it would take around 6,558 years to travel from Earth to Proxima Centauri at the maximum speed achievable by the Parker Solar Probe. However, it's important to note that this calculation is based on the current technological capabilities, and future advancements may allow for faster travel speeds.
To learn more about Proxima Centauri,
https://brainly.com/question/30704820
#SPJ4
1. List the 4 types of volcanoes. 2. Highlight in blue the two smaller volcanoes. 3. What is the chemical composition of the lava these two smaller volcanoes erupt? 4. How does the chemical composition effect the shape of the volcano?
1. The four types of volcanoes are shield, cinder cone, composite, and lava dome. Shield volcanoes are broad and low, composed of layers of lava flows.
Cinder cone volcanoes are small and steep, with a cone-shaped appearance and made up of loose rock fragments. Composite volcanoes, also known as stratovolcanoes, are tall and steep with layers of both ash and lava flows.
Lava dome volcanoes are small and rounded, formed from thick, sticky lava that piles up around the vent.
2. The two smaller volcanoes are cinder cone volcanoes.
3. Cinder cone volcanoes are known for producing lava that has a relatively low viscosity.
To know more about volcanoes visit:
https://brainly.com/question/32139597
#SPJ11
Using complete sentences, trace the migration patterns of early humans from Africa to North America. Then, explain the theory of early human migration and the evidence that supports it.
The migration patterns of early humans from Africa to North America can be traced through several stages.
How to explain the migration patterns of early humans ?It is believed that the first migration out of Africa occurred around 1.8 million years ago when early Homo erectus populations ventured into Eurasia.
Around 70,000 years ago, a significant migration event occurred known as the "Out of Africa" migration. This movement involved Homo sapiens, the modern human species, leaving Africa and spreading across the globe.
These early humans followed various routes, including coastal routes along the Indian Ocean and Arabian Sea, eventually reaching Southeast Asia and the islands of Indonesia and Melanesia.
From there, some early human populations continued their migration across the Bering land bridge, which connected Asia and North America during periods of lower sea levels due to glaciations.
This migration into North America is believed to have occurred around 15,000 to 20,000 years ago. These early humans then dispersed and populated different regions of North America over time.
The theory of early human migration, often referred to as the "Out of Africa" theory or the "Replacement" theory, posits that modern humans originated in Africa and subsequently migrated and replaced earlier human species in other regions of the world.
Find out more on early human migration at https://brainly.com/question/16974143
#SPJ1
The Earth’s crust, lower lithosphere, and asthenosphere are thin in comparison to deeper zones of the Earth (mesosphere, outer core and inner core). Textbooks commonly exaggerate the outer zone thicknesses, for clarity on page-sized illustrations. Using a millimeter ruler and compass with a very fine pencil, draw the whole Earth cross section at a scale of 1:100,000,000 (1cm = 1000 km). Illustrate the following boundaries exactly to scale, using solid lines to indicate changes in chemistry and dashed lines to indicate changes in mechanical properties, at the depths indicated: oceanic Moho at 12 km; continental Moho at 35 km; transition from lithosphere to asthenosphere at 150 km bottom of very soft asthenosphere at 350 km top of hard mesosphere at 700 km top of core mantle boundary at 2900 km outer core/ inner core boundary at 5100 km center of Earth at 6300 km Please explain how we have to draw this?
To draw the Earth cross section at a scale of 1:100,000,000 (1cm = 1000 km), follow these steps:
Prepare your drawing materials: You will need a millimeter ruler, a compass with a very fine pencil or a fine-tip pen, and a blank sheet of paper.
Determine the size of your drawing: Decide how big you want your drawing to be on the paper. For example, if you want the drawing to fit within a square of 10 cm x 10 cm, you will need to allocate that space on your paper.
Set the scale: Establish the scale of 1:100,000,000. This means that every centimeter on your drawing represents 1000 kilometers of actual distance. So, for example, if you want to represent a depth of 12 km, you will draw a line that is 0.12 cm long.
Draw the boundaries and layers: Start by drawing the boundaries and layers at their respective depths. Use solid lines to indicate changes in chemistry and dashed lines to indicate changes in mechanical properties.
Here's a step-by-step guide to drawing the Earth cross section based on the provided depths:
Draw a horizontal line at the bottom of your paper to represent the surface of the Earth.
Measure 0.12 cm (representing 12 km) from the surface line and draw a solid line across the paper. Label it as the oceanic Moho.
Measure 0.35 cm (representing 35 km) from the surface line and draw another solid line across the paper. Label it as the continental Moho.
Measure 1.5 cm (representing 150 km) from the surface line and draw a dashed line across the paper. Label it as the transition from lithosphere to asthenosphere.
Measure 3.5 cm (representing 350 km) from the surface line and draw another dashed line across the paper. Label it as the bottom of the very soft asthenosphere.
Measure 7 cm (representing 700 km) from the surface line and draw a solid line across the paper. Label it as the top of the hard mesosphere.
Measure 29 cm (representing 2900 km) from the surface line and draw a solid line across the paper. Label it as the top of the core mantle boundary.
Measure 51 cm (representing 5100 km) from the surface line and draw a solid line across the paper. Label it as the outer core/inner core boundary.
Measure 63 cm (representing 6300 km) from the surface line and draw a solid line across the paper. Label it as the center of the Earth.
Remember to label each boundary or layer accordingly.
Add additional details: If desired, you can add additional details to your drawing, such as labeling the different zones or adding a key for the line types (solid and dashed).
Ensure that you maintain the scale throughout the drawing, using the ruler to measure and accurately represent the depths.
By following these steps, you should be able to create an accurate and scaled representation of the Earth cross section.
To know more about asthenosphere here
https://brainly.com/question/29535098
#SPJ4
List the types of violations possible under an NPDES permit?
Violations of an NPDES permit can be divided into two categories: administrative and technical. Administrative violations include failure to submit required reports, failure to pay fees, and failure to obtain a permit.
Technical violations include discharging pollutants in excess of permit limits, discharging pollutants not listed in the permit, and discharging pollutants at an unauthorized location. Additionally, violations can include failure to comply with monitoring and reporting requirements, failure to implement best management practices, and failure to comply with any other permit conditions.
The Environmental Protection Agency (EPA) has the authority to enforce NPDES permit violations. Depending on the severity of the violation, the EPA may issue a warning letter, a compliance order, or a civil penalty. In some cases, the EPA may also refer the violation to the Department of Justice for criminal prosecution.
It is important for all NPDES permit holders to understand their permit requirements and to comply with them. Failure to do so can result in serious consequences, including fines, penalties, and even criminal prosecution.
know more about Violations here
https://brainly.com/question/31558707#
#SPJ11
We are surrounded by energy conversions everyday and innovations in this field are what powered the industrial revolution and our lifestyles nowadays. What are some of those conversions that are crucial to our day to day lives or society as a whole nowadays? What forms of energy are involved in these conversions? For example, In BC, electricity is mostly generated from Hydroelectric Dams, so that conversion from gravitational to kinetic to electrical energy an of course with massive turbines that allow us to harness this energy. Note that hydro as a technology is > 100 years old.
Some of the most crucial energy conversions in our day-to-day lives include:
Electricity generationTransportationWhat are the forms of energy in these energy conversions ?Some of the forms of energy involved in these conversions:
Mechanical energy: Mechanical energy is the energy of motion. It is used to power machines, such as engines and turbines.Electrical energy: Electrical energy is the energy of moving electrons. It is used to power devices, such as lights, appliances, and computers.Chemical energy: Chemical energy is the energy stored in the bonds of atoms and molecules. It is used to power batteries and fuel cells.Nuclear energy: Nuclear energy is the energy released when atoms are split apart. It is used to power nuclear power plants.Electricity is generated from a variety of sources, including fossil fuels, nuclear power, and renewable energy sources such as hydroelectricity, wind, and solar power. Transportation is another major area where energy conversions are used. Cars, trucks, trains, and airplanes all use energy to move.
Find out more on energy conversions at https://brainly.com/question/961052
#SPJ4
what type of plate boundary was responsible for their
formation? Klamath mountains
The Klamath Mountains were formed by a type of plate boundary known as a subduction zone. Subduction zones occur when two tectonic plates collide and one plate is forced underneath the other.
In this case, the Klamath Mountains were formed when the oceanic Farallon Plate was subducted beneath the continental North American Plate. This process of subduction caused the Farallon Plate to melt and the molten material to rise up and form the Klamath Mountains. The subduction zone also caused the formation of the San Andreas Fault, which runs along the western side of the Klamath Mountains.
The San Andreas Fault is a transform fault, which is a type of plate boundary where two plates slide past each other horizontally. The Klamath Mountains are a result of the complex interaction between the two plates, and the ongoing tectonic activity in the region.
know more about Klamath Mountains here
https://brainly.com/question/33172931#
#SPJ11
How does undergrazing degrade grasslands? Fewer nutrients are added to the soil. Unpalatable plants take over. Palatable plants like grasses die. Soil erodes and runoff increases. Carbon sequestration ceases to occur.
Undergrazing of grasslands can have a significant negative impact on the health of the ecosystem. When grazing is reduced, fewer nutrients are added to the soil, which can lead to a decrease in the health of the soil and the plants that grow in it.
Correct option is A.
Unpalatable plants, such as weeds, can take over the grassland, outcompeting the palatable plants like grasses, which can lead to their death. This can also lead to soil erosion and an increase in runoff, which can further degrade the grassland.
Additionally, when the palatable plants die, the carbon sequestration process ceases to occur, which can lead to an increase in atmospheric carbon dioxide levels. All of these factors can lead to a decrease in the health of the grassland and the species that rely on it.
Correct option is A.
know more about nutrients here
https://brainly.com/question/28111967#
#SPJ11
All of the following will enhance the likelihood of preservation of fossil remains except for... O Burial in a high-oxygen environment O Burial in a low-oxygen environment O Hard parts such as bones, teeth, and shells O Rapid burial by sediments.
Fossil remains are the preserved remains of organisms that lived in the past. The likelihood of preservation of fossil remains is enhanced by burial in a low-oxygen environment, hard parts such as bones, teeth, and shells, and rapid burial by sediments.
Correct option is D.
Burial in a high-oxygen environment, however, does not enhance the likelihood of preservation of fossil remains. In fact, it can have the opposite effect. High-oxygen environments are more likely to promote the decomposition of organic material, which can lead to the destruction of fossil remains.
Additionally, high-oxygen environments can lead to the oxidation of minerals, which can also lead to the destruction of fossil remains. Therefore, burial in a high-oxygen environment does not enhance the likelihood of preservation of fossil remains.
Correct option is D.
know more about low-oxygen environment here
https://brainly.com/question/27994401#
#SPJ11
A comet's dust tail...
A. Is behind the comet, in the direction of its orbit.
B. Is emitted from the comet and carried towards the Sun.
C. Is emitted from the comet and carried away from the Sun.
A comet's dust tail is emitted from the comet and carried away from the Sun.
This is the correct answer to this question.A comet is a celestial body that orbits around the sun and contains ice, dust, and other materials.
When the comet moves close to the sun, its ice starts to melt, producing a gas tail and a dust tail. The gas tail is directed away from the Sun, and the dust tail is pushed by sunlight radiation, making it curve and point away from the sun.
The tail's shape and size can differ based on the comet's speed, angle, distance from the Sun, and other factors.
To know more about emitted visit:
https://brainly.com/question/13490538
#SPJ11
What is produced by a lifestyle of poor areas and passed from one generation to the next? a. Underclass b. At-risk adults c. Culture of poverty 2. Lowest levels of the underclass: a. Truly disadvantaged b. At-risk c. Poor d. Transitional neighborhoods 3. When subcultural values are handed down from one generation to the next is called: a. Cultural mutation b. Cultural transmission c. Subcultural transmission 4. Poverty areas that suffer high rates of population turnover are called: a. At-risk neighborhoods b. Transitional neighborhoods c. Concentric zones 5. When neighbors are willing to practice informal social control through: a. Staying indoors b. Arresting criminals c. Being auxiliary police d. Surveillance 6. Substitution of an alternative set of goals and means from conventional ones is called: a. Innovation b. Ritualism c. Rebellion 7. Agnew suggests that criminality is the direct result of: a. Negative affective states b. Poverty c. Underclass d. Neighborhood 8. The elements of general stain theory include all the following, EXCEPT: a. Introduction into a life of poverty b. Failure to achieve positively valued goals c. Disjunction of expectations and achievements d. Removal of positively valued stimuli 9. According to general strain theory, why is it that some people who experience strain do NOT fall into a life of crime and eventually resort to criminality? a. They do not really experience strain b. They have coping skills c. People help the out d. They live in good communities 10. One of the biggest question marks about GST (General Strain Theory) is its ability to adequately explain what concerning the crime rate? a. Age differences b. Racial differences c. Economic status differences d. Gender differences 11. What occurs when the rules expressed in the criminal law clash with the demands of group conduct norms? a. Focal concerns b. Strain c. Culture conflict d. Concentration effect 12. Who wrote Culture Conflict and Crime, a theoretical attempt to link cultural adaptation to criminality? a. Cloward b. Miller c. Sellin d. Ohlin 13. Which of the following is one of Miller's lower class focal concerns? a. Trouble b. Toughness c. Smartness d. Criminality 14. Being independent of authority figures, such as the police, teachers, and parents is an example of: a. Trouble b. Autonomy c. Toughness d. Smartness 15. The author of the classic book, Delinquent Boys, was: a. Freud b. Martin c. Sutherland d. Cohen 16. A truant who engages in petty or status offenses is a: a. Corner boy b. College boy c. Delinquent boy d. Conflict boy 17. One who embraces the cultural and social values of the middle class is a: a. Corner boy b. College boy c. Delinquent boy d. Conflict boy 18. One who adopts a set of norms and principles in direct opposition to middle-class values is a: a. Corner boy b. College boy c. Delinquent bov 19. Overly intense responses that seem disproportionate to the stimuli that trigger them are called: a. Reaction formation b. Reality principle c. Cultural deviance d. Group autonomy 20. Who wrote the classic Delinquency and Opportunity? a. Winfree and Mays b. Martin and Gordon c. Brown and Dennis d. Cloward and Ohlin 21. The concept that people in all strata of society share the same success goals, but those in the lower class have limited means of achieving them is known as: a. Differential opportunity b. Differential association c. Differential reinforcement d. Differential timing 22. Those who are double failures and unable to gain success through legitimate means and unwilling to do so through illegal ones are likely to join which of the following gangs? a. Criminal b. Conflict c. Retreatist d. Corner boy gang 23. Gangs which exist in stable slum area in which close connections among adolescent, young adult and adult offenders create an environment for successful enterprise are known as: a. Criminal b. Conflict c. Retreatist d. Corner boy gang 24. Gangs that develop in communities unable to provide either legitimate or illegitimate opportunities are known as: a. Criminal b. Conflict c. Retreatist d. Corner boy gang 25. The foremost structural theory-based crime reduction strategy today is known as: a. War on Poverty b. Operation Weed and Seed c. VISTA (urban Peace Corps)
1. Culture of poverty is produced by a lifestyle of poor areas and passed from one generation to the next. The correct option is c.
2. Lowest levels of the underclass: Truly disadvantaged. The correct option is a.
3. When subcultural values are handed down from one generation to the next is called: Cultural transmission. The correct option is b.
4. Poverty areas that suffer high rates of population turnover are called: Transitional neighborhoods. The correct option is b.
5. When neighbors are willing to practice informal social control through: Surveillance. The correct option is d.
1. The correct answer is c. Culture of poverty. A lifestyle of poor areas can lead to the development of a culture of poverty, which refers to a set of beliefs, attitudes, and behaviors that are passed down from one generation to the next and can perpetuate poverty.
2. The lowest levels of the underclass are referred to as a. Truly disadvantaged.
3. When subcultural values are handed down from one generation to the next, it is called b. Cultural transmission.
4. Poverty areas that suffer high rates of population turnover are called b. Transitional neighborhoods.
5. When neighbors are willing to practice informal social control through d. Surveillance, it means they actively monitor and observe their surroundings to deter and prevent crime.
6. The substitution of an alternative set of goals and means from conventional ones is called a. Innovation.
7. According to Agnew, criminality is the direct result of a. Negative affective states.
8. The elements of general strain theory include all the following, EXCEPT a. Introduction into a life of poverty.
9. According to general strain theory, some people who experience strain do NOT fall into a life of crime and resort to criminality because b. They have coping skills.
10. One of the biggest question marks about GST (General Strain Theory) is its ability to adequately explain c. Economic status differences concerning the crime rate.
11. When the rules expressed in the criminal law clash with the demands of group conduct norms, it is called c. Culture conflict.
12. The book "Culture Conflict and Crime" was written by d. Ohlin.
13. One of Miller's lower class focal concerns is b. Toughness.
14. Being independent of authority figures, such as the police, teachers, and parents, is an example of b. Autonomy.
15. The author of the classic book, Delinquent Boys, was d. Cohen.
16. A truant who engages in petty or status offenses is a c. Delinquent boy.
17. One who embraces the cultural and social values of the middle class is a b. College boy.
18. One who adopts a set of norms and principles in direct opposition to middle-class values is a a. Corner boy.
19. Overly intense responses that seem disproportionate to the stimuli that trigger them are called a. Reaction formation.
20. The classic book "Delinquency and Opportunity" was written by d. Cloward and Ohlin.
21. The concept that people in all strata of society share the same success goals, but those in the lower class have limited means of achieving them is known as a. Differential opportunity.
22. Those who are double failures and unable to gain success through legitimate means and unwilling to do so through illegal ones are likely to join c. Retreatist gangs.
23. Gangs that exist in stable slum areas with close connections among adolescent, young adult, and adult offenders, creating an environment for successful criminal enterprise, are known as a. Criminal gangs.
24. Gangs that develop in communities unable to provide either legitimate or illegitimate opportunities are known as c. Retreatist gangs.
25. The foremost structural theory-based crime reduction strategy today is known as b. Operation Weed and Seed.
To know more about General Strain Theory, refer to the link below:
https://brainly.com/question/32258352#
#SPJ11
In this activity in your workbook you analyzed the values of the redshifts of the galaxies, finding galaxies that were close together in the image that also had identical or similar redshifts. You also found that the redshifts overall ranged from z=0.8 to 2-373 Step 4 covered the three-dimensional aspects of the image. In summary, what is needed for creating any three-dimensional model using actual distances and what, although important to our analyses, is not needed? Information (5 items) (Drag and drop into the appropriate area below) Hubble constant dominant stars in a galaxy type of galaxy location on the celestial sphere cosmological redshifts Needed for 3-D model Not needed for 3-D
When creating any three-dimensional model using actual distances, the following are needed:Type of galaxy.Location on the celestial sphere.
Cosmological redshifts.The Hubble constant.Dominant stars in a galaxy.However, information regarding the dominant stars in a galaxy is not needed for the 3-D model.
This is because dominant stars are observed at far shorter distances compared to the galaxies in consideration, and therefore their distances can be approximated more easily.
To know more about dimensional visit:
https://brainly.com/question/14481294
#SPJ11