What term describes a solution which is in equilibrium with an undissolved solute?
A)precipitating
B)aqueous
C)saturated
D)unsaturated
E)supersaturated

Answers

Answer 1

A solution in equilibrium with an undissolved solute is a saturated solution.

A homogeneous mixture composed of two or more substances is called a solution.

In a solution, there are two primary components, which are termed as,

Solute.Solvent.

The minor component that is dissolved in a solution is known as the solute. The major component that dissolves the solute is known as the solvent.

At a given temperature and pressure, every solvent is capable of dissolving a particular amount of solute in it.

If a solution has dissolved as much as it is capable of dissolving, then the solution is known as a saturated solution.

Hence, a solution in equilibrium with an undissolved solute is known as a saturated solution.

Learn more about the saturated solutions here: https://brainly.com/question/2078413

#SPJ4


Related Questions

How do you find the number of molecules?.

Answers

To find the number of molecules, first determine the molecular weight of the substance for one mole, then divide the molar mass value by the molecular mass, and multiply by the Avogadro constant.

The total atomic masses of an element's constituent elements make up its molecular mass. This value is also expressed in terms of atomic mass units.

to count the molecules that make up a substance.

By multiplying the number of moles by the Avogadro constant, one can get the total number of atoms or molecules in a sample. The following formula is used:

According to his law, which states that "equivalent volumes of different gases measured under the same conditions of temperature and pressure contain the same number of molecules," one mole of material has 6.022x10²³ atoms.

Once the substance's molecular weight for one mole has been determined, divide the molar mass value by the molecular mass to arrive at the necessary number of molecules the multiply it by the Avogadro constant.

To determine the quantity of sulphur (S₈) molecules present in a solid sulphur of present in 16 g of solid sulphur of 16 g.

1 mole of solid sulphur (S₈)=8×32 g=256

256 g of solid sulphur contains 6.022×10²³molecules.

Then, 16 g of solid sulphur contains =6.022×10²³ x16/256 molecules =3.76375×10²² molecules.

Learn more about number of atom at https://brainly.com/question/29769911

#SPJ4

A sample of chemical x is found to contain 5. 0 grams of oxygen, 10. 0 grams of carbon, and 20. 0 grams of nitrogen. The law of definite proportion would predict that a 70 gram sample of chemical x should contain how many grams of carbon?.

Answers

17 grams of carbon should be present in a 61-gram sample of chemical x.

The law of definite proportions, also known as Proust's law or the law of constant composition, is a principle in chemistry that asserts a chemical compound will always contain its constituent components in a fixed ratio (by mass), regardless of its source or method of creation.

According to the law of definite proportion, regardless of quantity or source, the proportions of each element to its weight in a chemical combination will always be exactly the same value.

In the ensuing query:

The chemical X sample includes:

Oxygen content: 5.0 grams

One kilogram of carbon

Nitrogen content: 20.0 grams

The compound's total mass is (10.0 + 5.0 + 20.0) g, which equals 35.0 g.

10/35 = 2/7 is the proportion of carbon in the compound.

As a result, the amount of carbon in 61 grammes of the sample is equal to 2/7 x 61, or 17.42 grams.

Therefore, we can infer that 17 grams of carbon should be present in a 61-gram sample of chemical x.

To learn more about law of definite proportion from given link

https://brainly.com/question/11026166

#SPJ4

What is the mole of 2 H2O?.

Answers

Answer:

2H2O have water = 2×2=4moles.

Explanation:

(⁠◕⁠ᴗ⁠◕⁠✿⁠)(⁠◕⁠ᴗ⁠◕⁠✿⁠)(⁠◕⁠ᴗ⁠◕⁠✿⁠)

Is CH4 a nonpolar molecule?.

Answers

[tex]CH_{4}[/tex], also known as methane, is a nonpolar molecule.

This can be seen in its molecular structure, which consists of four hydrogen atoms arranged symmetrically around a single carbon atom in a tetrahedral arrangement.

The four hydrogen atoms in methane have identical electronegativities, resulting in a uniform distribution of electrons around the carbon atom, making the molecule nonpolar.

[tex]CH_{4}[/tex] is a nonpolar molecule because its four bonded hydrogen atoms arrange themselves symmetrically around the central carbon atom, so that the positive and negative charges cancel each other out. This means that the molecule has no net dipole moment, making it nonpolar.

To learn more about nonpolar, click here:

https://brainly.com/question/15173422

#SPJ4

What did I do wrong and how would I do this correctly?

Answers

The mass of Sodium Iodide (NaI) will react with 7.82 grams of Chlorine (Cl2)  16.49g.

What mass of Sodium Iodide?

given specifications:

7.82g is the mass of chlorine gas.

Unknown:

Weight in NaI = mass / molar mass

Solution:

The following is the reaction equation:

2NaI + Cl2 becomes 2NaCl + I2.

Find the quantity of moles belonging to the identified species in order to solve this issue;

Number of Cl2 moles = 7.82 / 71

Cl2 has a molar mass of 2(35.5) = 71g/mol.

The number of moles is 0.11 moles.

from the equation for a balanced reaction;

2 moles of NaI and 2 moles of Cl2 will react.

Additionally, 0.11 moles of Cl2 and 0.11 moles of NaI will react.

Mass of NaI  = 0.11 x 149.9 = 16.49g

The mass of Sodium Iodide (NaI) will react with 7.82 grams of Chlorine (Cl2)  16.49g

To learn more about Sodium Iodide refer to:

https://brainly.com/question/20273068

#SPJ1

nebula can form either an average star, or_______ ______________. that is about the size of our sun, or a ____________ star which can be over 3 times as big as our sun!

Answers

A nebula can form either an average star, or a massive star, that is about the size of our sun, or a supergiant star which can be over 3 times as big as our sun!

What do you mean by stars?

Stars are giant spheres of hot gas, primarily composed of hydrogen and helium, that generate energy through nuclear fusion reactions. They are found in vast numbers throughout the universe and are the building blocks of galaxies.

A star's energy is generated by nuclear fusion reactions that take place in its core. This energy is responsible for the star's brightness and for the formation of the various elements in the star.

Stars come in different sizes, colors, and temperatures. The size of a star is described by its mass and radius, the color of a star is determined by its temperature, with the hottest stars being blue and the coolest stars being red. The temperature of a star also determines its luminosity, that is, how bright it appears in the night sky.

To know more about sun visit:

https://brainly.com/question/9260347

#SPJ1

how are solar eruptions influenced by the sunspot cycle

Answers

Solar eruptions are strongly influenced by the sunspot cycle. Solar eruptions, such as solar flares and coronal mass ejections, are more frequent and intense during the peak of the sunspot cycle. This is because sunspots are areas of intense magnetic activity, and solar eruptions are caused by the sudden release of magnetic energy. As the sunspot cycle progresses, the magnetic fields become increasingly more complex and intense, leading to more frequent and intense solar eruptions.

changes in the Sun's magnetism produce a greater number of sunspots, more energy and cause solar eruptions of particles

suppose that you run a reaction in ethanol to form a very non-polar organic substance. how would you extract your product?

Answers

There are a few methods through we can extract non-polar from the products (i) liquid liquid extraction (ii) solid-liquid extraction

Liquid-liquid extraction is a method for removing non-polar chemical compounds from molecules. This entails mixing the mixture containing the drug to be extracted with a non-polar solvent, such as hexane or ether. The material and the non-polar solvent will separate into layers that can be separated and collected.

The addition of a non-polar substance, such as silica gel, to the mixture will cause the non-polar organic substance to be adsorbed while the other ingredients stay in the liquid phase. This approach is known as solid-liquid extraction. The desired ingredient can then be removed from the solid by washing it with a non-polar solvent.

To know more about  non-polar solvent click below:

https://brainly.com/question/3184550#

#SPJ4

How many molecules are in 11. 5 mol of H2O?.

Answers

There are 6.9253 x10²⁴ molecules in 11. 5 mol of H₂O

The total number of atoms or molecules in a sample can be calculated by multiplying the number of moles by the Avogadro constant. The formula is as follows:

number of molecule= moles x avogadro's number

One mole of material has 6.022x10² atoms, and equivalent volumes of various gases measured under the same conditions of temperature and pressure contain the same number of molecules.

number of molecule= moles x avogadro's number

number of molecule= 11. 5 mol x  6.022x10²³

number of molecule= 6.9253 x10²⁴

Therefore, there are 6.9253 x10²⁴ moleculesin 11. 5 mol of H₂O

Learn more about number of molecule at brainly.com/question/29769911

#SPJ4

which product besides radiation do radioactive atoms give off when they decay?

Answers

When a radioactive atom decays, it emits energy in the form of radiation as well as charged matter particles. These particles may be alpha or beta in nature.

The nuclei of the atoms are unstable during radioactive decay, but when they emit radiation, they become more stable. It is a nuclear reaction rather than a chemical reaction because it only involves the nuclei of atoms. One element may change into another during a nuclear reaction.

There are three types of radioactive decay: alpha, beta, and gamma decay. Both alpha and beta decay alter the number of protons in an atom's nucleus, causing the atom to change elements.

The nucleus loses two protons during alpha decay. The nucleus either loses or gains a proton during beta decay. Because there is no change in proton number in gamma decay, the atom does not become a different element.

Learn more about alpha decay here:

https://brainly.com/question/27870937

#SPJ4

The denity of copper (Cu) i 8. 96 g/cm3 at 25°C. What i the ma of a piece of copper that occupie 26. 7 cm3 at thi temperature?

Answers

The mass of the piece of copper is  239.9 g

The density of a substance is a measure of its mass per unit volume. In the case of copper, its density is 8.96 g/cm3 at 25°C. This means that 1 cm3 of copper weighs 8.96 grams at 25°C.

To determine the mass of a piece of copper that occupies a certain volume, we can use the formula: mass = density x volume

In this case, the volume of the piece of copper is 26.7 cm3 and the density is 8.96 g/cm3. So we can plug these values into the formula:

mass = 8.96 g/cm3 x 26.7 cm3

By multiplying the density by the volume, we find that the mass of the piece of copper is 239.9 grams.

The final answer is 239.9 g.

Learn more about density here:

https://brainly.com/question/26364788

#SPJ4

a solution is made from 23.5 g of glycerin in 130 g of methanol at 50 °c. what is the mole fraction of methanol? round your answer to the third decimal place.
Glycerin = C3H5(OH)3

Answers

Therefore, the mole fraction of methanol is 0.941. To calculate the mole fraction of methanol, you need to know the number of moles of methanol and glycerine present in the solution.

First, we need to calculate the number of moles of methanol in the solution. To do this, we use the molar mass of methanol (32.04 g/mol)

130g / 32.04g/mol = 4.05 moles

We also need to calculate the number of moles of glycerine in the solution. To do this, we use the molar mass of glycerine (92.09 g/mol)

23.5g / 92.09g/mol = 0.2555 moles

The mole fraction of a component is calculated by the number of moles of that component divided by the total number of moles in the solution.

Mole fraction of methanol = moles methanol / (moles methanol + moles glycerine)

= 4.05 moles / (4.05 moles + 0.2555 moles)

= 0.941

Therefore, the mole fraction of methanol is 0.941.

Learn more about Mole Fraction here:

brainly.com/question/29808190

#SPJ4

Calculate the percent composition of phosphorus in magnesium phosphate.

Answers

The percent composition of phosphorus in magnesium phosphate is approximately 32.3%.

Calculate the percent composition of phosphorus in magnesium phosphate?The percent composition of phosphorus in magnesium phosphate can be determined by using the molecular formula of magnesium phosphate.The molecular formula for magnesium phosphate is Mg3(PO4)2.This formula contains three moles of magnesium (Mg) and two moles of phosphorus (P) combined with eight moles of oxygen (O).The percent composition of phosphorus can then be determined by dividing the number of moles of phosphorus (2) by the total number of moles of all elements in the compound (13), multiplied by 100.This calculation yields a percent composition of phosphorus in magnesium phosphate of 15.38%.Therefore, the percent composition of phosphorus in magnesium phosphate is 15.38%.

To learn more about the percent composition of phosphorus in magnesium phosphate refer to:

https://brainly.com/question/11617445

#SPJ1

The equilibrium equation below shows ammonia hydroxide NH4OH decomposing into ammonium ions NH4 and hydroxide OH ions when is a system in equilibrium 

Answers

The equilibrium constant is 1.8 × 10⁻⁵ . The equilibrium equation below shows  NH₄OH +H ⇌NH₄+H₂O

Calculating the equation:

Kw= 1 × 10⁻¹⁴

K= K× K` = 1.8× 10⁻⁵

How does equilibrium work?Chemical equilibrium is the state in which the reactants and products are present at concentrations that no longer tend to change over time, so that the system's properties cannot be seen to change.When the forward reaction proceeds at the same rate as the reverse reaction, this condition occurs.In most cases, the forward and reverse reaction rates are the same, not zero.As a result, the concentrations of reactants and products do not change significantly. Dynamic equilibrium is the term for such a state.

Learn more about equilibrium equation:

brainly.com/question/13414142

#SPJ1

describe the process of triangulation to locate an epicenter.

Answers

The process of triangulation to locate an epicenter are as follows.

What is triangulation?

Triangulation is a method used in surveying, navigation, and geography to determine the location of a point by measuring angles to it from known points at either end of a fixed baseline, rather than measuring distances to the point directly. This can be done by measuring angles to the point from two or more fixed locations, and then using trigonometry to calculate the position of the point.

Here is the general process of triangulation to locate an epicenter:

Seismographs, which are instruments that measure ground motion, are set up in different locations around the area of the earthquake.The time at which the earthquake's seismic waves are recorded by each seismograph is noted.Using the time difference between when the seismic waves were recorded at each seismograph, the distance from the epicenter to each seismograph can be calculated.These distances, along with the location of each seismograph, are then used to triangulate the location of the epicenter.This process can be done mathematically, by creating circles with radius equal to the calculated distance from the epicenter to each seismograph and finding the point at which the circles intersect.The intersection point is the estimated location of the epicenter.

By following the above ways you can use the process of triangulation to locate an epicenter.

To learn more about triangulation from the given link:

https://brainly.com/question/15759504

#SPJ4

compare and contrast a current through a circuit with a static discharge

Answers

Compare between a static discharge and a current flowing via a circuit, A voltage source provides a constant current to a circuit. In a static discharge, the transfer of charge happens very quickly and discontinuously.

How are static discharges and electric currents different from one another?Since the charges in static electricity are at rest and build up on the inductor's surface, this is the main distinction between static electricity and current electricity. The conductor's internal flow of electrons is what generates the current's electricity.Distinguish between a static discharge and a current flowing via a circuit. The transfer of electrons from a negative to a positive charge occurs in both cases. A voltage source provides a constant current to a circuit. In a static discharge, the transfer of charge happens very quickly and discontinuously.Compare between a static discharge and a current flowing via a circuit, A voltage source provides a constant current to a circuit. In a static discharge, the transfer of charge happens very quickly and discontinuously.          

To learn more about static discharge refer to:

https://brainly.com/question/821085

#SPJ4

In metals, the valence electrons are considered to be

Answers

In metals, the valence electrons are considered to be continually moving from one atom to another and are not associated with any specific pair of atoms.

Metallic solids are made up of tightly packed atoms. In most cases, each metal atom's outermost electron shell overlaps with a large number of neighboring atoms.

As a result, valence electrons are constantly moving from one atom to the next and are not associated with any specific pair of atoms. In short, unlike covalently bonded substances, valence electrons in metals are nonlocalized, allowing them to roam relatively freely throughout the crystal.

The atoms left behind by the electrons become positive ions, and their interaction with valence electrons produces the coherent and consistent or binding thrust that holds the metallic particle next to each other.

Learn more about valence electrons here:

https://brainly.com/question/12717954

#SPJ4

How much kinetic energy does a 50 kg object have if it is moving at a velocity of 2m s?.

Answers

100 Joules of kinetic energy will be produced by 50 kg of object.

The formula for kinetic energy is:

KE = 1/2 * m * v^2

where

KE = kinetic energy

m = mass of the object

v = velocity of the object

So, to find the kinetic energy of a 50 kg object moving at a velocity of 2 m/s:

KE = 1/2 * 50 kg * (2 m/s)^2

KE = 1/2 * 50 kg * 4 m^2/s^2

KE = 100 J (Joules)

So, the kinetic energy of the 50 kg object moving at a velocity of 2 m/s is 100 Joules.

It is worth noting that kinetic energy is a scalar quantity, meaning it does not have a direction.

It is also important to know that the kinetic energy of an object increases as the square of its velocity, so as the velocity increases, the kinetic energy increases rapidly.

In summary, kinetic energy is the energy an object possesses due to its motion, the formula to calculate kinetic energy is 1/2 * m * v^2, where m is the mass of the object and v is the velocity of the object. In this example, a 50 kg object moving at a velocity of 2 m/s has a kinetic energy of 100 Joules.

To know more about kinetic energy click here:

https://brainly.com/question/26472013#

#SPJ4

How do you find the molar mass of an unknown?.

Answers

To find the molar mass of an unknown element/compound use the following steps:

Step 1: Using the chemical formula, calculate the number of atoms in each element in the compound.

Step 2: Multiply each element's atomic weight by the number of atoms in the compound.

Step 3: Total everything and assign a unit of measurement of grams/mole.

for eg: What is the molar mass of sodium carbonate (Na2CO3)?

Solution: Sodium carbonate contains two sodium atoms, one carbon atom, and three oxygen atoms. The atomic weight would be

Na : 2 x 23.0 = 46

C : 1 x 12.0 = 12

O : 3 x 16 = 48

When we add the total values, we get 106 (46 + 12 + 48).

As a result, Na2CO3 has a molar mass of 106 g/mole.

learn more about molar mass at:

brainly.com/question/13152455

the complete question is, how do you find the molar mass of an unknown element or compound?

what is the difference between organic and inorganic chemistry?

Answers

Inorganic chemistry is the study of the remaining (i.e., non-carbon-containing) subset of chemicals, whereas organic chemistry is defined as the study of molecules containing carbon.

The characteristics and behaviour of inorganic compounds, which include metals, minerals, and organometallic compounds, are the focus of inorganic chemistry. Chemistry that does not have a carbon-hydrogen link, such as inorganic elements and compounds that are found naturally in the earth, is known as inorganic chemistry. Life cannot exist without inorganic substances like carbon dioxide, oxygen, minerals, and water. The study of carbon-containing molecules' structure, characteristics, content, reactions, and synthesis is known as organic chemistry. The majority of organic compounds are composed of carbon and hydrogen, however they can also contain a variety of additional elements (e.g., nitrogen, oxygen, halogens, phosphorus, silicon, sulfur).

learn more about organic chemistry here:

https://brainly.com/question/26088065

#SPJ4

give atleast 2 importance of ecological relationship in the enviroment

Answers

Explanation:

Competition and predation are ecological relationships but are not symbiotic. Predation does not occur over a long period of time, and competition is an indirect interaction over resources.

Competition is most typically considered the interaction of individuals that vie for a common resource that is in limited supply, but more generally can be defined as the direct or indirect interaction of organisms that leads to a change in fitness when the organisms share the same resource.

In predation, one organism kills and consumes another. Predation provides energy to prolong the life and promote the reproduction of the organism that does the killing, the predator, to the detriment of the organism being consumed, the prey. Predation influences organisms at two ecological levels.

One of the variables required for the
experiment is volume of gas the
container can hold.

A sealed container held 62.8 mL of
water. What is the volume of the
container in liters?

Answers

The container has a volume of 0.0628 L.

To convert mL (milliliters) to L (liters), we need to divide by 1000 since 1 L is equivalent to 1000 mL.

Therefore, the volume of the container in liters can be calculated as follows:

Volume of container = Volume of water in mL / 1000

Volume of container = 62.8 / 1000

Volume of container = 0.0628 L

Therefore, the volume of the container is 0.0628 L.

It is important to note that when conducting experiments, it is essential to accurately measure the volume of the container as it directly impacts the results of the experiment.

In this case, knowing the volume of the container is crucial as it is one of the variables required for the experiment. Any error or imprecision in the measurement of the volume can lead to inaccurate results and potentially affect the outcome of the experiment.

For more such questions on volume, click on:

https://brainly.com/question/29796637

#SPJ11

Answer: The container has a volume of 0.0628 L.

Explanation:

150g of 80% pure ZnCO3 is completely reacted with excess HCI to produce ZnCl2, CO₂, and H₂O.
i. Which one is limiting reactant?
ii. Calculate the mass of ZnCl₂ formed?
iii. How many molecules of water are produced?
iv. What volume of CO2 are produced if the reaction is carried out at 27°C and 760 mm of Hg pressure?​

Answers

The balanced chemical equation of the given statement is-

       Zn + 2HCl → ZnCl2 + H2

How to calculate balanced chemical equation?

Zn has a molar mass of 65.38 g mol 1.

HCl has a molar mass of 36.458 g mol-1.

Calculate the moles of each reactant:

  (1 mol Zn/ 65.38 g Zn)  (150 g Zn) = 2.2943 mol Zn

 (1 mol HCl/ 36.458 g HCl)  (73 g HCl) = 2.0023 mol HCl

Because there is an excess of zinc (Zn), hydrochloric acid (HCl) must be the cause.                                    

 restricting agent.

 Hydrochloric acid (HCl) is the limiting agent.

The mass in molars of    

136.3 g mol-1 is ZnCl2.

 Cu has a molar mass of 68g mol-1.

  Magnesium (Mg) being a limiting reagent results in:

  (10.00 g Mg) divided by (1 mol Mg / 24.305 g Mg), (1 mol Cu / 1 mol Mg), and (68 g Cu / 1 mol Cu) yields 28.15 g.

28.15 grams of formed ZnCl2.

To know more about similar problem follow link

brainly.com/question/24191406

#SPJ1

What will be the kinetic energy of a boy of mass 50 kg driving a bike with velocity of 2 ms 1?.

Answers

The kinetic energy of a boy with a mass of 50 kg driving a bike at a velocity of 2 m/s is 20 J (Joules).

The kinetic energy of an object is the energy it possesses due to its motion. It is calculated by using the formula KE = 0.5 * m * v^2, where m is the mass of the object in kilograms and v is its velocity in meters per second.

So, for a boy of mass 50 kg driving a bike with a velocity of 2 m/s, the kinetic energy can be calculated as follows:

KE = 1/2 * 50 kg * (2 m/s)^2

KE = 20 J

It's worth noting that kinetic energy is a scalar quantity and has no direction, so the velocity's direction does not affect the calculation. Additionally, the unit of kinetic energy is Joule (J) which is the SI unit of energy. Also, it's worth noting that this is a very small amount of energy, and it's unlikely that the boy would be able to do much work with it.

To know more about Kinetic energy click here:

https://brainly.com/question/26472013#

#SPJ4

Which substance below has the strongest intermolecular forces?

Propane, CH3CH2CH3, MW = 44 g/mol

O Methanethiol, CH3SH, MW = 48 g/mol

Ethanamine, CH3CH2NH2, MW = 45 g/mol

Methyl phosphine, CH3PH3, MW = 48 g/mol

Answers

Methyl phosphine (CH3PH3) has the strongest intermolecular forces among the given compounds.

The strength of intermolecular forces is determined by the type of bond present in a substance. Methyl phosphine has dipole-dipole interactions, which are stronger than the London dispersion forces present in the other compounds. This is the main reason for this compound having the strongest intermolecular forces.

To learn more about   phosphine:

brainly.com/question/14642838

rank a series of molecules by expected solubility in water based on polarity and hydrogen bonding. some slightly soluble compounds are included in this exercise. rank the organic compounds from most soluble to least soluble. to rank items as equivalent, overlap them.

Answers

The solubility  in water based on polarity and hydrogen bonding is that polar compounds dissolves in the water due to the hydrogen bonding.

The polar compounds easily soluble in the water as they makes hydrogen bond with the water. Let us take an example : The order of solubility in some compounds is given as :

CH₃CH₂CH₂COOH > CH₃CH₂CH₂CH₂OH > CH₃CH₂OCH₂CH₂ > CH₃CH₂CH₂CH₃

Carboxylic acid is more soluble in the water as it males more hydrogen bond with water as compared to the alcohol. The last one is not able to make the hydrogen bond with the water . The two types of hydrogen bonding are : intermolecular hydrogen bonding and intermolecular hydrogen bonding.

To learn more about solubility here

https://brainly.com/question/14367567

#SPJ4

(15 points) How has atomic theory changed over time, and what has stayed the same? What is still believed to this day, and what is something that is changed?

Answers

Answer: As new discoveries are made, existing theories are revised or replaced.

Dalton stated that atom is matter that can not be divided.

His "plum pudding" model (1904) suggested: the electrons are embedded in the positive charge.  

J. J. Thomson discovered the electron in 1897.  

According to Rutherford model of the atom:  

1) Atoms have their charge concentrated in a very small nucleus.  

2) Major space in an atom is empty.  

3) Atoms nucleus is surrounded by negatively charged particles called electrons.  

4) An atom is electrically neutral.

Explanation:

Why do electrons stay in the electron cloud & not just fly off from around the nucleus of an atom?

Answers

The electrons stay in the electron cloud and do not fly off because of the stronger attraction to the proton.

In the electron cloud, the positive charge of the proton binds the electron from flying off since opposites attract. This allows the electrons to move around the nucleus of an atom. The nucleus is positively charged and the electrons that moves around the nucleus are negatively charged. so they attract each other. It is because the atom is so small. There are too many protons. some of the outer protons are loosely bound and more free to react with the electron. Most atoms do not have too many protons. so there is nothing for the electron to interact with. Therefore, each electron in a stable atom remains in its wavefunction shape.

To learn more about Electron cloud please visit:

https://brainly.com/question/29261688

#SPJ4

match the volume to the correct graduated cylinder

• 21.3 ml
• 44.5 ml
• 6.6 ml
• 24.0 ml
• 75.0 ml
• 29.5 ml
• 38.0 ml
• 2.65 ml

Answers

Gradually graduated cylinders are available in a variety of sizes, or volume capacities, and, like a measuring cup, are used to determine volume by pouring liquid to the cylinder and comparing the liquid level to the graduated scale.

How do you determine the capacity of a graded cylinder?

The volume that was measured is the same as the amount of liquid that was put inside the cylinder.

Similar to weighing, determining the volume of a liquid is a fundamental and common lab procedure. Both a graduated cylinder and a burette are commonly used to measure liquid volume.

A graded cylinder is, as its name suggests, a cylindrical glass or plastic tube that is sealed at one end and has a calibrated scale etched (or marked) on its exterior.

Gradually graduated cylinders are available in a variety of sizes, or volume capacities, and, like a measuring cup, are used to determine volume by pouring liquid to the cylinder and comparing the liquid level to the graduated scale.

The volume that was measured is the same as the amount of liquid that was put inside the cylinder. As a result, the graduated cylinder and similar apparatus (volumetric flasks, Erlenmeyer flasks, and beakers) are categorized as to-contain (TC) apparatus.

To Learn more About graduated cylinders refer To:

brainly.com/question/24869562

#SPJ1

Find the molecular formula for a compound made up of 85.6 % carbon and 14.4%
hydrogen by mass that has a molar mass of 70.15 g/mol.

Answers

85.7 g of such carbon dioxide and 14.3 g of hydrogen are found in 100 g of the molecule. C and H have atomic weights of 12g and 1g, respectively. As a result, the compound's chemical formula is C3H6. It is an alkene with a double bond by the name of propene.

What does molecular formula mean?

The chemical formula is an equation that specifies how many atoms of the each element there are in a single compound's molecule. It displays the precise amount of atoms present in a molecule. Propane, for instance, has the chemical formula C4H10. The given compound has a formula of 4 carbon elements and 10 h atoms.

A molecular formula Why is it?

In a molecular formula, each sort of atom's number and composition are specified. A molecule contains atoms. No prefix is used if there is just one element of a certain kind. A subscript is added to the symbol for an atom if it contains four or more of the certain type of atom.

To know more about Molecular Formulae visit:

https://brainly.com/question/28647690

#SPJ1

Other Questions
g when calculating gdp which of the following is an example of a final good or service group of answer choices paint purchased by toyota to paint their new fleets. vegetables bought by a restaurant owner from a wholesale food distributor. a pgcc student buys a new economics textbook. Please include proper citations in your discussion post. Points will be deducted if proper citations are not used.12.21 (LO 1, 2, 3, 4) Comprehensive Financial Statement Analysis Using Exhibit 12.9 as a guide, compare C&C Sports performance to the industry averages. What particular observations and recommendations do you have for George Douglas, president of C&C Sports?Select Common-Size Percentages: 2017 2016 2015 2014 2013 2012Cash & equivalents 6.6% 11.0% 10.2% 9.6% 7.2% 7.9%Trade receivables, net 21.9% 20.2% 21.4% 25.7% 24.3% 25.0%Inventory38.7% 36.4% 37.6% 36.7% 41.0% 40.5%Property and equipment 13.9% 12.5% 13.1% 11.9% 13.2% 10.7%Short-term debt14.0% 14.9% 12.0% 13.4% 14.3% 13.7%Trade payables12.7% 14.2% 15.7% 16.8% 17.1% 17.1%Long-term debt12.6% 10.9% 8.7% 6.9% 11.8% 9.6%Stockholders equity 35.3% 41.3% 42.7% 42.3% 35.2% 40.3%Gross profit39.4% 38.4% 36.6% 34.9% 35.2% 37.6%Operating expenses35.2% 32.3% 31.0% 29.8% 30.9% 31.3%Operating income4.2% 6.1% 5.6% 5.1% 4.3% 6.3%Income before taxes3.4% 5.3% 4.8% 4.3% 3.3% 5.7%Select Ratios: 2017 2016 2015 2014 2013 2012Current ratio2.0 1.9 2.2 2.0 2.0 1.8Quick ratio (Acid test)0.8 0.9 0.8 0.7 0.7 0.7Average collection period 36 days 32 days 36 days 38 days 37 days 36 daysInventory turnover 3.2 times 3.3 times 3.6 times 4.1 times 3.5 times 3.9 timesDebt-to-equity1.6 1.6 1.4 1.2 1.8 1.4Return on assets26.2% 6.2% 6.1% 5.5% 6.9% 9.1%Return on stockholders equity216.9% 15.6% 15.0% 15.8% 18.6% 28.1%1 TRUE OR FALSE among the reasons for the growth in decentralized computing was the availability of inexpensive personal computer hardware and productivity software. which of the following identifies the scale of governance that would be most affected by an individual local voter in purcellville? Solve the system of equations using any method. Describe the method used. How does dweck address the what they say question in her talk 14. which one of the following accurately describes the force of gravity? a. the force of gravity is slightly lower at the bottom of a mountain than it is at the top. b. the gravity acceleration is in the same direction as the force of gravity, and thus away from the center of the earth. c. the gravity acceleration is in the same direction as the force of gravity, and thus toward the center of the earth. d. the gravity acceleration has no effect on a body moving in directly the opposite direction of the force of gravity. mark for review (will be highlighted on the review page) Please help!! I cant figure this out nursing research began with Florence Nightingale but developed slowly until its rapid acceleration in the 1950's. HOWEVER since the 1980's the focus for nursing has been on what? The power, P (watts), of a car engine is proportional to the square of its speed,s (m/s).When s= 25, P = 1400.Work out the speed (to 1 DP) when the power is 1820 wattsm/s if you file for bankruptcy which debts are forgiven? A paragraph about 5 things to change about the world Which of the following statements is FALSE?OA. Once you are in the maintenance stage of change, you still need tofocus on not doing the behavior again.OB. Once you decide you want to change, you still have to go through astep-by-step process before the change occurs.OC. You can help someone in the action stage by forcing them tomake their change.OD. The stages of change help us understand how we can best helpothers to change.SUBMIT Assume that 41. 1g of hydrogen peroxide decompose to produce oxygen gas at STP to the following balanced equation:2H2O2 (l) ---------> 2H2O(l) + O2 (g)How many Liters of oxygen gas are produced? What causes latency lag?. the mamluk regime gained great status among muslims when it During january 2016, wells corporation purchased $200,000 of inventory; they paid one-fourth in cash, and signed a note for the remaining balance. Indicate the appropriateness of the subject for a four- to six-page research paper by answering the following question. Is the following topic suitable for a research paper? why or why not? the history of my hometown's government from 1800 to 1900. multicellular organisms are composed of a variety of living structures that are formed when cells differentiate. how could the living structure pictured below be classified? State the domain and range for the following relation. Then determine whether the relation represents a function. {( -4,6), (-4,7), (6,5), (7,9)} The domain of the relation is __. (Use a comma to separate answers as needed.) The range of the relation is ___ (Use a comma to separate answers as needed.) Does the relation represent a function? Choose the correct answer below. A. The relation is a function because there are no ordered pairs with the same second element and different first elements. B. The relation is a function because there are no ordered pairs with the same first element and different second elements. C. The relation is not a function because there are ordered pairs with 5 as the second element and different first elements. D. The relation is not a function because there are ordered pairs with - 4 as the first element and different second elements.