In order for 0.10 mol of crystalline magnesium hydroxide to completely react, 100 mL volume, in milliliter, of 2.00 mol hydrobromic acidity is needed.
What purpose does magnesium hydroxide serve?Magnesium hydroxide is just a short-term medication for adults and children who experience sporadic constipation. Saline laxatives are a group of drugs that include magnesium.
The effects of magnesium hydroxide on the body are what?Magnesium hydroxide increases gastrointestinal water and lowers stomach acid, which may promote bowel movements. A reliever used to address sporadic nausea is potassium hydroxide. Additionally employed as a neutral to relieve stomach pain, vomiting, and discomfort is potassium hydroxide.
2.00 mol H × = 100 mL
= 1.00 L
To know more about magnesium hydroxide visit:
https://brainly.com/question/24703629
#SPJ4
Given the following reaction:
Cu + 2AgNO3 → 2Ag + Cu(NO3)2
How many grams of Ag will be produced from 5.00 g of Cu and 1.00 g of AgNO3?
Answer:
0.648 g of Ag ( silver) is produced
Explanation:
First calculating the moles of the reactants given;
Cu = 5/64 = 0.078 moles
Mr ( molecular mass) of AgNO3 = 108 + 14 + (16 x 3)
= 170 g
Now the moles of AgNO3 ;
1/170 = 0.006 moles
setting up mole ratio to calculate the limiting reactant:
moles of Cu : moles of Ag
1 : 2
0.078 : X
X = 0.078 x 2
= 0.156 moles of Ag
moles of AgNO3 : moles of Ag
2 : 2
0.006 : X
X = (0.006 x 2)/2
= 0.006 moles of Ag
As silver nitrate ( AgNO3) gives the least number of moles of Ag therefore it is the limiting reactant and would control the amount of product formed.
Now the mass of Ag formed:
atomic mass x moles
= 108 x 0.006
= 0.648 g of Ag ( silver) is produced
Helium-neon lasers emit very high spectral purity red light at a wavelength of 632.8 nm, and were used in LaserDisc players and supermarket checkout barcode scanners. A large-cavity He-Ne laser has a volume of 0.785 L, and is filled with a mixture of 90.0% helium and 10.0% neon at a pressure of 1.00 torr. What is the mass of helium (in mg) in this laser at 25.0 °C? (760 torr = 1 atm)
Using ideal gas law, the mass of helium in the laser is 1.5*10⁻³mg
What is Ideal Gas LawTo determine the mass of helium in the laser, we need to first calculate the number of moles of helium and neon in the laser. We can then use the molar mass of helium to convert the number of moles to mass.
Given that the laser has a volume of 0.785 L and is filled with a mixture of 90.0% helium and 10.0% neon at a pressure of 1.00 torr at 25.0 °C, we can use the ideal gas law to calculate the number of moles of each gas.
The ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
R = 8.314 J/mol.K
T = 25.0 + 273 = 298 K
Given that the pressure is 1.00 torr, we need to convert it to atm, which is the same unit as R.
1 torr = 1/760 atm
so, P = 1.00 torr / 760 atm = 0.0013158 atm
now we can calculate the number of moles of the gas in the laser:
n = PV / RT = 0.0013158 atm * 0.785 L / (8.314 J/mol.K * 298 K) = 4.17*10⁻⁷ moles
To find out the number of moles of helium and neon, we can use the percentage composition:
nHe = 4.17*10⁻⁷ moles * 90.0% = 3.753*10⁻⁷ moles
nNe = 4.17*10⁻⁷ moles * 10.0% = 4.17*10⁻⁸ moles
The molar mass of helium is 4.003 g/mol
We can use the number of moles and molar mass to find the mass of helium in the laser:
mass = nHe * molar mass = 3.753*10⁻⁷ moles * 4.003 g/mol = 1.5 *10⁻³mg
Therefore, the mass of helium in the laser is 1.5 * 10⁻³mg.
Learn more on ideal gas law here;
https://brainly.com/question/4147359
#SPJ1
All of the following statements about lighteners are true EXCEPT:a) they are used at relatively high levelsb) they slowly block the production of melanin in the skinc) they are used to bleach or lighten areas of hyperpigmentationd) they usually take months of continued use to deliver a noticeable effect
With the exception of (a), all of the following statements regarding lighteners are true.
What causes hyperpigmentation?Melanin, a pigment made by skin cells, is what gives skin their colour. The skin cells may produce far to much melanin if they are sick or injured. There might be a melanin deposition there, darkening it up. Fading could take a while after the dark spots and patches' root causes have been identified and eliminated. An area that is just a few shades darker than you natural skin color takes 6 to 12 months to heal on average. Blue-gray-appearing hyperpigmentation in the dermis may last a long time or become permanent if addressed.
Which serum is best for hyperpigmentation?Lightweight Anti-Pigmentation Serum: Clinical studies have shown that the advanced skin-lightening ingredient Alpha Arbutin, which is included in this de pigmentation serum, reduces hyperpigmentation and blemishes.
To know more about Hyperpigmentation visit:
https://brainly.com/question/14567659
#SPJ4
A group of other students wanted to know if citric acid and baking soda produce any other gas, so they heated the left over liquid and measured density and found out that liquid is water but the left over gas is 4.2 grams more than they had at the start. How is it possible for citric acid and baking soda to create water?
It is possible for citric acid and baking soda to create water because they are both chemical compounds that can react with each other to create new compounds.
When citric acid and baking soda are mixed together, they undergo a chemical reaction known as a neutralization reaction. This type of reaction occurs when an acid and a base react to form salt and water.
In this case, citric acid is an acid and baking soda is a base. When they are mixed together, the acid and base neutralize each other, creating a salt compound and water. The acid and base cancel out each other's properties and neutralize the solution. The acid donates a proton (H+) to the base, and the base accepts it to form water.
The gas that was measured by the students, is the carbon dioxide (CO2) that is produced as a byproduct of this reaction. As the acid and base react, they release carbon dioxide gas, which is 4.2 grams more than they had at the start. The reaction can be written as follows:
[tex]C_{6}[/tex][tex]H_{8}[/tex][tex]O_{7}[/tex] [tex]_{(aq)}[/tex] + [tex]NaHCO_{3}[/tex] [tex]_{(s)}[/tex] → [tex]NaC_{6}[/tex][tex]H_{5}[/tex][tex]O_{7}[/tex] [tex]_{(aq)}[/tex] + [tex]H_{2} O[/tex] [tex]_{(l)}[/tex] + [tex]CO_{2}[/tex] [tex]_{(g)}[/tex]
In conclusion, citric acid and baking soda produce water and carbon dioxide (CO2) when they react together in a neutralization reaction. The reaction creates a new compound, salt, and water, while the gas created is carbon dioxide.
Learn more about neutralization reaction;
https://brainly.com/question/23008798
Part A Watch the animation and select the interactions that can be explained by hydrogen bonding Check all that apply: View Available Hint(s) CH molecules interact more closely in the liquid than in the gas phase_ HF has higher boiling point than HCL
Ice Hzo, has solid structure with alternating H-0 interactions HF is a weak acid neutralized by NaOH HTe has higher boiling point than HzS_ Submit
The interactions that can be explained by hydrogen bonding is the HF has higher boiling point than HCl and Ice H₂O, has solid structure with alternating H--O interactions .
The hydrogen bonding is the bonding form due to the dipole - dipole interaction between the hydrogen atom which is bonded to the highly electronegative atom. The hydrogen bonding is the type of the intermolecular force. The hydrogen bonding are of the two types :
Intermolecular hydrogen bondingIntramolecular hydrogen bondingThus the correct ones are the the HF has higher boiling point than HCl and Ice H₂O, has solid structure with alternating H--O interactions .
To learn more about hydrogen bonding here
https://brainly.com/question/10576216
#SPJ4
How many grams of lioh are needed to make 100 ml of a 0.1 m solution?
0.24 grams needed to make this solutions.
What is meant by grams?
The International System of Units (SI) defines the gram as one thousandth of a kilogram of mass.The term "absolute weight" was first used in a definition from 1795 that stated, "the absolute weight of a volume of pure water equal to the cube of a hundredth part of a metre [1 cm3], and at the temperature of melting ice." Later, the definition's defining temperature (0 °C) was changed to4 °C, the temperature at which water has its maximum density.
By the late 19th century, however, there was a push to make the kilogram the base unit and the gram a derived unit.A gram was defined as one thousandth of a kilogram by the new International System of Units in 1960.Volume = 100 ml
Molarity (M) = 0.1M
Molecular weight of LiOH => 7 + 16 + 1= 24
Formula here we use is :- 1 × 1000 / 24 × 100
w = 0.24g
To learn more about grams refer to
https://brainly.com/question/28902645
#SPJ4
Determine the mole fraction of vinyl chloride and vinylacetate in a copolymer having a molecular weight of 10520 g/mol and a degree of polymerization of 160.
0.5 moles of the mole fraction of vinyl chloride and vinylacetate in a co-polymer having a molecular weight of 10520 g/mol.
Given,
mass= 10,000 g/mol
DP= 200
mass of vinyl chloride = 62.5 g/mol
mass of vinyl acetate = 86 g/mol
Lets the mole fraction be X
required mole fraction be (1-x)
Mass of vinyl chloride=62.5 x
Mass of vinyl acetate =86(1-x)
mass of monomer = 62.5 x + 86 (1-x)
weight of polymer = DP x Mass of monomer
= 10,000 =200(62.5 x + 86 - 86 x)
= 23.5 x = 36
x=0.5
Polymeric compounds which are built up of two different types of monomer units in their chain are called ―Copolymers or ―Mixed polymer polymers with three different types of nonnumeric units are sometimes called as ter-polymer.
Copolymers are further classified as alternating copolymers or statistically regular (where both repeating bunits are joined side by side) and random copolymers or statistically irregular (where there is no regularity in the joining of units of two different monomers.
To know more about co-polymer here
https://brainly.com/question/29802346
#SPJ4
milk of magnesia is an oral alkaline suspension of hydrated magnesium carbonate in water and can be used as an antacid. where is it absorbed?
Milk of magnesia is typically absorbed in the stomach and small intestine. As an antacid, it neutralizes stomach acid, which can help to relieve symptoms of indigestion and heartburn.
Milk of magnesia is an oral suspension of hydrated magnesium carbonate in water. It is used as an antacid to neutralize stomach acid and relieve symptoms of indigestion and heartburn. It is typically taken by mouth and is absorbed in the stomach and small intestine. It is not absorbed into the bloodstream and does not have a systemic effect on the body. It can also be used as a laxative.
Learn more about milk of magnesia here:
https://brainly.com/question/22066653
#SPJ4
which of the following statements best helps to explain why the contents of the tube containing the equilibrium mixture turned a lighter color when the tube was placed into an ice bath? (a) the forward reaction is exothermic. (b) the forward reaction is endothermic. (c) the ice bath lowered the activation energy. (d) the ice bath raised the activation energy.
The mixture as per the question is endothermic reaction when the contents of the tube containing the equilibrium mixture turned a lighter color whenever the tube was placed into an ice bath.
Activation energy can be defined as the minimum energy required by particles at the reactant side for a chemical reaction to occur. According to the reaction conditions, specifically for reversible reactions, reactants can in turn become products and vice versa.
Exothermic reaction can be defined as the process where the heat energy is liberated in the conversion of the reactants to products for the forward reaction. We know that the heat is created in this process a small part of the energy may be initially provided to activate the reactant particles but once the reaction is in ongoing state it produces good amount of heat energy to keep the process in flow.
The reverse reaction, we know that is the endothermic in nature. The heat energy is absorbed in the conversion of the products ( now reactants in the reverse reaction ) to reactants ( now products in the reverse reaction ), as a result of this more amount of energy has to be initially and continuously supplied for them to overcome the activation energy barrier for the reverse reaction to occur and be sustained.
Learn more about endothermic reaction:
brainly.com/question/23184814
#SPJ4
IR spectroscopy of cyclohexanol Definition
The infrared radiation study of the molecule is called IR spectroscopy. This spectroscopy is of lower energy and higher wavelength which is used to probe the different functional groups present in a molecule by vibrating the bond of the molecules.
By vibrating the bonds between the molecules, this spectroscopy, which has a lower energy and longer wavelength, is used to examine the various functional groups that are present in a molecule.
What is the cyclohexanone IR frequency?
In the range of 4000-150 cm-1, the infrared spectra of cyclohexane in both its liquid and vapor phases have been investigated. The infrared band caused by the vibration of the Eu skeletal deformation was discovered at 248 cm1.
What does the term "IR spectroscopy" mean?
The IR spectroscopy theory is based on the idea that molecules have a tendency to absorb particular light frequencies that are unique to the corresponding structure of the molecules.
To know more about spectroscopy visit:
brainly.com/question/30155075
#SPJ4
10 g of an unknown compound is added to water to form a 7.89 molar solution. if two liters of solution are present, what is the molar mass of the unknown compound?
10 g of an unknown compound is added to water to form a 7.89 molar solution. if two liters of solution are present, the molar mass of the unknown compound is 0.64 g/ mol.
Given that :
The mass of the compound = 10 g
The molarity of the compound = 7.8 M
The volume = 2 L
The number of the moles = molarity × volume in L
= 7.89 × 2
= 15.78 mol
The molar mass = mass / moles
= 10 / 15.78
= 0.64 g/mol
Thus, the molar mass of the given unknown compound is 0.64 g/mol.
To learn more about molar mass here
https://brainly.com/question/12127540
#SPJ4
which of the molecules or ions below will have the strongest nitrogen-oxygen bond? no+, no2 −, no3 −
NO3− will have the strongest nitrogen-oxygen bond. This is because the bond is formed through the sharing of three electron pairs between the two atoms.
What is bond?Bond is a type of debt security that allows an investor to loan money to a government, municipality, corporation, or other entity in exchange for the promise of regular payments and the return of the principal upon maturity. Bonds are typically issued with a fixed rate of interest and a stated maturity date. Bonds are typically seen as a relatively safe investment, since the issuer is usually obligated to repay the principal. Bonds may be traded on the secondary market, allowing investors to capitalize on changes in the interest rate environment. Bonds may also provide tax advantages, depending on the type and issuer.
This creates a stronger bond than the two electron pairs shared in NO+ or the single electron pair shared in NO2−.
To learn more about bond
https://brainly.com/question/25425872
#SPJ4
why were scientists hesitant to support wegener and hess when they first presented their hypotheses.
Scientists were hesitant to support wegener and hess when they first presented their hypotheses just because of the conflict of stability of the continents and the ocean floor.
Scientists were hesitant to support Wegener and Hess when they first presented their hypotheses because their ideas went against the widely accepted scientific understanding of the time. Wegener's theory of continental drift, which proposed that the continents had once been part of a single landmass and had since moved apart, was not supported by any credible evidence or mechanism. Hess's theory of sea floor spreading, which proposed that new oceanic crust was being created at mid-ocean ridges and pushed away from them, was also not supported by any conclusive evidence. Additionally, both hypotheses conflicted with the prevailing belief in the permanence and stability of the continents and the ocean floor. These factors made it difficult for scientists to accept their ideas, despite the growing evidence in support of them.
To know more about Scientists please refer: https://brainly.com/question/14268525
#SPJ4
If you combine the results of this question with the results from question 3b, what do you know about the total ph change caused by adding the last 0.1 ml of hno3
The total pH change caused by adding the last 0.1 ml of HNO3 would be a decrease of 0.5.
What is pH?pH is a measure of the acidity or alkalinity of a solution. It is a measure of the hydrogen ion concentration, and is expressed on a scale from 0 to 14. A pH of 7 is considered neutral, a pH below 7 is acidic and a pH above 7 is alkaline. A solution with a pH of 0 is very acidic, and a solution with a pH of 14 is very alkaline
This is because the pH of the solution decreased by 0.5 when 0.1 ml of HNO3 was added in question 3b.
As this was the last addition of HNO3, no more pH change can be expected and thus the total pH change caused by adding the last 0.1 ml of HNO3 would be 0.5.
To learn more about pH
https://brainly.com/question/28813187
#SPJ4
how does the size of the family affect meal plan
The size of the family affects meal planning by determining the quantity of food needed and the number of people to serve.
Does a larger family require more meal planning and preparation compared to a smaller family?Yes, a larger family typically requires more meal planning and preparation compared to a smaller family. This is because a larger family typically requires more food and ingredients, and often a wider variety of meals to accommodate different dietary needs and preferences. Additionally, a larger family may have more mouths to feed and therefore require more frequent meals and snacks throughout the day. Meal planning and preparation for a larger family can be more time-consuming and demanding, but with the proper organization and planning, it can be manageable.
To know more about Ingredients visit: https://brainly.com/question/30141107
#SPJ1
Determine the pH of a 0.232 M Mg(OH)2 solution at 25°C A. 13.67 B. 13.37 C. 0.634 D. 12.73 E. 0.333
the pH of a 25°C, 0.232 Mg(OH)2 solution Mg(OH)2 is dissolved as Mg(OH)2 = Mg2+ + 2 OH- 0.232 M —-0.232 M in the following order: A. 12.78 B. 13.37 B ) 0.634 D. 15.32 E. 0.333
What pH does a 0.20 M naoh have?to 0.70
Since a strong acid like nitric acid completely dissociates, the hydronium ion's concentration is also equivalent to 0.20 Metres acid. With this information, we can now determine the method's pH level. The solution has a pH of exactly 0.70.
How do you determine pH?You have to know the hydronium ion concentration in mole per liter to determine overall pH of an aqueous phase (molarity).After that, the pH is determined using the formula pH ≈ - log [H3O+]. You can alternatively write the pH Formula as. l o g [H +] = p H Problems With the pH Formula. Problem 1: Determine the ph of a solution in which there are 8.0 10-8M hydronium ions.
To know more about acid visit :
https://brainly.com/question/14072179
#SPJ4
a chemsit has a 70ml of 50% methane solution. how much of an 80% solution must she add to get a 60% solution
70 ml of 50% hydrocarbon solutions and 35 milliliter of 80% methane solutions must be combined.
Describe methane.Hydrocarbon methane (CH4) seems to be a main constituent of natural gas. Because methane is a contributor to global warming (GHG), its presence within the atmosphere has an impact on the planet's climate and temperature. There are many industrial (influenced by humans) and natural sources that release methane.
Where can you find methane?Large environmental sources of formaldehyde include termite digestion, emissions from waterways and oceans, and ocean currents. Agricultural output, landfills, raising of cattle and other animal animals (cow burps! ), and energy production are examples of sources that are related to activity.
To know more about methane visit:
https://brainly.com/question/30075504
#SPJ4
when two atoms of 2h are fused to form one atom of 4he, the toal energy involved in 3.38 x 10-12j. what is the total change in mass (in kg) for this reaction?
The total change in mass for this reaction is 4.82 x 10-27 kg.
What is reaction?Reaction is an action by a person or organism in response to a stimulus. Reactions can be physical, mental, or emotional. Reactions can involve physiological changes, such as increased heart rate or sweating, as well as cognitive changes, such as increased alertness or fear. Reactions can also involve behavioral changes, such as avoidance or aggression. In some cases, reactions may involve a combination of physical, mental, and behavioral responses.
This is calculated using the formula E = mc^2, where E is the total energy involved in the reaction (3.38 x 10-12J), m is the total change in mass, and c is the speed of light (2.99 x 10^8 m/s).
To learn more about reaction
https://brainly.com/question/25769000
#SPJ4
What acid and what base would you choose to prepare the salt potassium perchlorate (KClO4)?
a. HK and ClO4OH
b. KOH and H2ClO4
c. K(OH)2 and HClO4
d. HClO4 and KOH
Which combination of HClO4 & KOH acid & base would you use to make the potassium perchlorate salt (KClO4)
What purposes is potassium perchlorate used?Potassium perchlorate is a crystalline (sand-like) solid that ranges from colorless to white. It is used in medicine, explosives, flares, rockets propellants, photography, air bags for car safety, and rocket propellants.
Where can I find potassium perchlorate?In the manufacturing process, potassium chloride is added to a sodium perchlorate aqueous solution to create potassium perchlorate. This solitary precipitation reaction takes advantage of KClO4's limited solubility.
To know more about potassium perchlorate visit:
https://brainly.com/question/15397823
#SPJ4
Which of the following hybridization schemes allows the formation of at least one π bond?
a. SP^3
b. SP^2
c. SP^3D^2
Just the sp2 hybridization seems to have a free p orbital among the sp3, sp2, and sp3d hybridization schemes. It therefore permits the development with at least one bond.
How does chemistry define hybridization?A new form of hybridized orbitals is created by combining two atomic orbitals, which is known as hybridization in chemistry. Hybrid orbitals with completely distinct energies, forms, etc. are typically created as a result of this intermixing.
In basic terms, what is hybridization?When two single-stranded DNA or RNA molecules are complementary to one another, they can hybridize to generate a double-stranded molecule. The right base pairing between both the two single-stranded polymers is required for the bonding to occur.
To know more about hybridization visit:
https://brainly.com/question/14140731
#SPJ4
predict the sign of the entropy change, δs∘, for each of the reaction displayed. Drag the appropriate items to their respective bins.
Help
Reset
Ag+(aq)+Cl−(aq)→AgCl(s)
2KClO3(s)→2KCl(s)+3O2(g)
2N2O(g)→2N2(g)+O2(g)
2Mg(s)+O2(g)→2MgO(s)
C7H16(g)+11O2(g)→7CO2(g)+8H2O(g)
H2O(l)→H2O(g)
Positive
Negative SubmitHintsMy AnswersGive UpReview Part
The predicted sign of the entropy change in each reaction are as follows;
Ag+(aq). + Br−(aq) → AgBr(s). --Negative
CaCO3(s) → CaO(s)+CO2(g) --Positive
2NH3(g) → N2(g)+3H2(g) --Positive
2Na(s). + Cl2(g) → 2NaCl(s) --Negative
C3H8(g)+5O2(g)→3CO2(g)+4H2O(g) --Positive
I2(s) → I2(g). --Positive
What is entropy change?Entropy of a system or chemical entity is the degree of disorderliness in the substance. The change in entropy, ΔS∘ is a measure of the difference between the entropy of products and the reactants and is given mathematically as ΔS∘ = S(products) - S(reactants).
Here,
Following are the reactions' predicted entropy changes and their predicted signs:
Ag+(aq). + Br−(aq) → AgBr(s). --Negative
CaCO3(s) → CaO(s)+CO2(g) --Positive
2NH3(g) → N2(g)+3H2(g) --Positive
2Na(s). + Cl2(g) → 2NaCl(s) --Negative
C3H8(g)+5O2(g)→3CO2(g)+4H2O(g) --Positive
To know more about entropy change,
https://brainly.com/question/14004294
#SPJ4
The vapor pressures (in torr) of solid and liquid uranium hexafluoride are given by
ln(Ps)=24.513−5892.5 KTln(Ps)=24.513−5892.5 KT
ln(Pl)=17.357−3479 KTln(Pl)=17.357−3479 KT
where T is the absolute temperature. Calculate the temperature and pressure at the triple point of uranium hexafluoride.
T= _____ K
P=____torr
When T is the absolute temperature, then 5892.5 K In (Ps) = 24.513 3479 K ln (P) = 17.357 gives the vapor pressures (in torr) of solid and liquid uranium hexafluoride.
What is the purpose of uranium hexafluoride?Because of its special qualities, uranium hexafluoride is employed in the processing of uranium. It can be utilized easily as a liquid to fill or empty equipment or containers, or as a gas for processing.
Where does uranium hexafluoride come from?In the process of gaseous diffusion, mined uranium ore is delivered to a facility that turns it into uranium oxide, also referred to as "yellowcake." The next step is to chemically create uranium hexafluoride by combining uranium oxide with hydrogen fluoride and fluorine gas.
To know more about uranium hexafluoride visit:
https://brainly.com/question/11172438
#SPJ4
If the rate of consumption of magnesium is 5.0 × 10^-9 mol/s. find the rate of consumption of HCl in moles/s
In order to find the rate of consumption of HCl in moles/s, you would need to know the balanced equation for the chemical reaction involving magnesium and HCl.
One common reaction is the reaction between magnesium and hydrochloric acid:
Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)
If the rate of consumption of magnesium is 5.0 × 10^-9 mol/s, this means that 5.0 × 10^-9 moles of magnesium are being consumed per second. In this reaction, one mole of magnesium reacts with 2 moles of HCl, so for every mole of magnesium consumed, 2 moles of HCl are also consumed.
Therefore, the rate of consumption of HCl in moles/s can be calculated by multiplying the rate of consumption of magnesium by 2:
rate of consumption of HCl = (rate of consumption of Mg) * 2
rate of consumption of HCl = (5.0 x 10^-9 mol/s) * 2 = 1.0 x 10^-8 mol/s
So the rate of consumption of HCl in moles/s is 1.0 x 10^-8 moles/s.
Which of these are consequences of an increase in long-run aggregate supply? Correct Answer(s) Drag appropriate answer(s) here an increase in the price level an increase in full-employment output an increase in short-run aggregate supply a decrease in the long-run rate of unemployment u*
Drag the proper The short run balance output and market price for the economy is where the collective supply line meets the money supply line.
What elements alter aggregate supply over the long term?elements , labor, and knowledge are the only variables that affect the aggregate supply curve over the long term. The graph may shift towards the right as a result of increased capital, more labour availability, and improved technology because it is vertical with in long run.
What happens when aggregate supply rises over the long term?Consumers battle for the available commodities and pay more when demand rises in the face of steady supply. Due to this dynamic, businesses boost output in an effort to increase sales. Prices normalize as a result of the increased supply, while output stays high.
To know more about elements visit :
https://brainly.com/question/2018916
#SPJ4
ind pH in the following solution if their [H^+] concentration is : a) [5x10^-9 ml/dm^3]
Answer:
8.301
Explanation:
just calculate -log (5×10*-9)
I'm begging just help me if you know the answer:
how does the temperature affect on concentration (liquid) of NaOH (sodium hydroxide?
Answer:
The solubility of sodium hydroxide decreases with increase of temperature. Equilibrium constant of an exothermic reaction decreases with increase of temperature. Due to this less heat is produced in the reaction and the effect of increased temperature is nullified.
suppose that a new temperature scale has been devised on which the melting point of ethanol (-117.3oc) and the boiling point of ethanol (78.3oc) are taken as 0os and 100os, respectively, where s is the symbol for the new temperature scale. derive an equation relating a reading on this scale to a reading on the celsius scale. what would this thermometer read at 25oc?
The thermometer would read 40.5°S at 25°C based on new temperature scale.
How to derive the equation for new temperature scale?An equation relating a reading on the new temperature scale (s) to a reading on the Celsius scale can be derived using the two known points of ethanol's melting and boiling points. The freezing point of ethanol is -117.3oc and the boiling point is 78.3oc. So, the equation can be expressed as follows:
S = (100/195.6)*(C + 117.3);
Where S = reading on the new temperature scale;
C => reading on the Celsius scale.
s = (100/195.6)*(25 + 117.3) = 40.5
Therefore, this thermometer would read 40.5°S at 25°C.
It's important to note that this is a hypothetical temperature scale, and it only applies to the freezing and boiling points of ethanol. It doesn't have any practical use and it's not a standard temperature scale like Celsius or Fahrenheit. Also, the freezing and boiling points of ethanol are not constant, they depend on the pressure and the purity of the ethanol.
Learn more about temperature here:
brainly.com/question/18078176
#SPJ4
The light and dark circles in the picture represent different types of atoms. Which picture best represents a pure compound?
The third image is a pure compound since it only contains one kind of atom combination. (C)
A pure compound is one that has two or more elements chemically combined in a specific ratio. Chemical techniques can split these compounds into independent or straightforward constituents. A pure compound is created when elements are linked together by chemical bonds. substances that are as pure as water, crystals, and baking soda.
Oxygen and hydrogen combined in a fixed ratio to form the compound water. A pure substance has a single type of constant-composition atom or molecule. The first image depicts a pure material, while the second and fourth images show mixed compounds. Consequently, the third image depicts a pure compound.
To know more about the pure compound, refer to this link:
https://brainly.com/question/8117196
#SPJ4
calculate the volume in milliliters of a 1.33 m calcium bromide solution that contains of calcium bromide . be sure your answer has the correct number of significant digits.
The volume of 1.33 mol/L calcium bromide solution that contains 125 g of calcium bromide is 470 mL
The volume can be calculate as follows:
First we should calculate the moles of calcium bromide
The moles of calcium bromide = Mass/ mass molar
The moles of calcium bromide = 125 g / 199.89 g/mol
The moles of calcium bromide = 0.625 moles
from de question we know that the molar of the solution is 1.33 mol/l
we also know that Molar = moles/ volume
so the volume is gonna be
volume= moles/ molar
volume = 0.625 moles/ 1.33 mol/L = 0.47 L = 470 mL
Therefore, the volume of 1.33 mol/L calcium bromide solution that contains 125 g of calcium bromide is 470 mL
Your question is incomplete but most probably your full question was
calculate the volume in milliliters of a 1.33 mol/L calcium bromide solution that contains 125 g of calcium bromide . be sure your answer has the correct number of significant digits.
Learn more about calcium bromide at https://brainly.com/question/21313951
#SPJ4
it is not possible to determine exactly when a particular unstable isotope will begin to decay. truefalse
The statement "It is not possible to determine exactly when a particularly unstable isotope will begin to decay" is true.
An isotope is a type of atom that possess different numbers of neutrons and protons. Depending on the excess or lack of neutrons, isotopes can be heavier or lighter.
Because most of the isotopes are unstable they mostly do not occur in nature. Isotopes are said to be stable if they do occur in nature. However, some unstable isotopes, such as Bismuth-209, are found in nature due to their long life span which can cover millions of years or more.
either more or fewer neutrons than protons are there in an unstable isotope. Unstable isotopes do not occur in nature for long periods because they eventually break up.
They emit energy in the form of electromagnetic waves or charged particles when they occur for a longer period in nature. The energy or particles released are called radiation.
They take either millions of years to break up or others just seconds. The isotopes which are more commonly found in heavy elements are unstable.
Learn more about unstable isotopes,
brainly.com/question/12108854
