One dose of milk of magnesia needs to be neutralized with 0.35 L of HCl at a pH of 1.3
From the pH, we may calculate the hydrogen ion concentration as follows;
pH equals -log[H+]
Antilog: [H+] (-pH)
Antilog = [H+] (-1.3)
[H^+] = 0.0398 M
The reaction equation is now;
Milk of Magnesia with 2HCl leads to MgCl2 plus 2H2O.
Mg[tex](OH_{2} )[/tex] reaction mass is 4.00102mg or 0.4 g.
Mg[tex](OH_{2} )[/tex] moles are equal to 0.4 g/58 g/mol, or 0.00689 moles.
If two moles of HCl and one mole of Milk of Magnesia react, Mg[tex](OH_{2} )[/tex] interacts with 0.00689 moles of 0.00689 moles of 2 moles/1 mole.
equals 0.0138 moles of HCl
Observe that
Number of moles = volume concentration
Volume equals moles times concentration
Volume is 0.0138 moles per 0.0398 M.
Amount = 0.35 L
Learn more about Milk of Magnesia
brainly.com/question/22066653
#SPJ4
A bond energy tells us both how much energy is required to break 1 mole of that bond AND the energy that will be released when 1 mole of that type of bond is formed.
The bond energy is the energy required to break the one mole of the such chemical bond and the energy released when the mole of the bond is formed.
The Bond energy is also called as the average bond enthalpy or we can say that bond enthalpy. The bond energy is the amount of the energy required to break the one such of the chemical bond. The bond energy is the energy released when chemical bond formed.
The example is :
Cl - Cl ----> 2Cl
The bond energy is , ΔH = +59 kcal/mol
The bond energy is the measurement of the bond strength.
To learn more about bond energy here
https://brainly.com/question/26141360
#SPJ4
A basketball is left outside in winter when the temperature is -2.00°C, has a volume of 6.88L and the pressure inside the basketball is 0.795atm.
a) How many moles of gas are in the basketball?
b) What is the partial pressure of oxygen in the basketball?
A basketball is left outside in winter when the temperature is -2.00°C, has a volume of 6.88L and the pressure inside the basketball is 0.795atm. 182 moles of gas are in the basketball The partial pressure of oxygen in the basketball is 0.998 atm.
What is partial pressure ?The term partial pressure is defined as the pressure exerted by an individual gas in a mixture.
By an ideal gas equation,
PV = nRT
Where,
P = pressure
V = volume
R = gas constant its value is 8.314
T = temperature
n = number of moles
By putting this value in given equation, we get
0.795 × 6.88 = n × 8.314 × 271.15
n = 5.46 / 0.03
= 182
Thus,182 moles of gas are in the basketball The partial pressure of oxygen in the basketball is 0.998 atm.
To learn more about the partial pressure, follow the link;
https://brainly.com/question/15075781
#SPJ1
what is pkb of the conjugate base of x-281? (assume 25 ∘c.)
The pkb of the conjugate base of x⁻281 is 9.69.
Conjugate base is termed as the base member x⁻ of a pair of compounds which transform into each other by gaining or losing a proton. The conjugate base is able to gain or absorb a proton in the chemical reaction. It is formed when a proton is removed from an acid. It depends upon which substance is involved. conjugate base is the solvated electron whose conjugate acid is the atomic hydrogen.
Its calculation is based on the relation between pKa and pKb with pKw
pKa + pKb = pKw = pKa + pKb = 14.00
pKb = 14.00 - pKa = 14.00 - 4.31 = 9.69
To know more about conjugate base here
https://brainly.com/question/30225100
#SPJ4
structures consisting of four fused rings of carbon atoms with one or more polar hydroxyl groups attached to the ring structure are called
Steroids are the structures made up of four fused carbon atom rings with one or more polar hydroxyl groups affixed to the ring structure. The two main biological roles of steroids are as signaling molecules and as critical elements of cell membranes that affect membrane fluidity.
What do you mean by hydroxyl groups?
A functional group is one that contains the hydroxyl group (-OH). Alcohols are the compounds that are created when hydroxyl groups are the main functional group attached to carbon backbones. This group is located on the far right in the structural formula of the chemical molecule ethanol, which is a kind of alcohol.
Additional examples include propanol, methanol, and isopropyl alcohol.
To learn more about functional groups, click here: -
https://brainly.com/question/29263610
#SPJ4
each gas is measured. the researcher claims that chlorine gas is in one of the containers. what must the mass, in grams, of the gas in that container be in order to justify this claim? give your answer to the nea
It is not possible to answer this question without additional information. The amount of chlorine gas in the container depends on the size of the container, the pressure of the air inside it, and the temperature of the gas.
What is chlorine gas?Chlorine gas is a toxic, yellowish-green gas that has a strong, pungent odor. It is extremely reactive and is used in a wide range of industrial applications, from water purification to bleaching and disinfecting. Chlorine gas is a hazardous material and can cause serious health effects if inhaled or ingested. At low levels, it can cause irritation of the eyes, nose and throat. At higher levels, it can cause lung damage, difficulty breathing and even death. Chlorine gas can be produced by burning organic materials such as wood or coal, as well as by chemical reactions such as the reaction of hydrochloric acid with calcium hypochlorite. It is also produced naturally through the breakdown of saltwater in the ocean.
To learn more about chlorine gas
https://brainly.com/question/4607123
#SPJ4
Classify each of the following as either a Lewis acid or a Lewis base.?
1. B(OH)3
2. P(CH3)3
3. BeCl2
4. CN^-
A sample of iron fillings and sulphur were put in a boiling tube and heated for 5 minutes. State and explain the observations made.
Write a word equation for the reaction taking place
When a sample of iron fillings and sulfur were put in a boiling tube and heated for 5 minutes chemical change takes place and iron sulfide is formed which is black in color.
What is a chemical change?Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
Learn more about chemical change,here:
https://brainly.com/question/23693316
#SPJ1
write the common and systematic (IUPAC) names of the ether that has the following structure
CH3---O---CH2CH3
Common name:
Systematic name:
Ethyl methyl ether is the common name for the provided ether (CH3-O-CH2CH3), while methoxy ethane is its Systematic (IUPAC) name.
Write about ether.An oxygen atom is bonded to two aryl or alkyl groups in any organic molecule that belongs to the ether family. Water also has structural similarities to ethers and alcohols, as well as to both ethers and alcohols.
Uses of ether.Ethers are frequently used in the manufacturing industry as extractants & solvents for ester, gums, hydrocarbons, alkaloids, oils, resins, dyes, plastics, lacquers, and paints. They work as dewaxing extractants for lubricating oils. Hospitals use diethyl ether as an anaesthetic. During surgery, anaesthesia aids in putting patients to sleep or making them unconscious.
To know more about ether visit :
https://brainly.com/question/23537178
#SPJ4
Cellular isozymes of pyruvate kinase are allosterically inhibited by:A) high concentrations of AMP.B) high concentrations of ATP.C) high concentrations of citrate.D) low concentrations of acetyl-CoA.E) low concentrations of ATP.
High ATP concentrations allosterically block the cellular homologs of pyruvate kinase.
Why does ATP stop phosphofructokinase from working?Phosphofructokinase activity was hindered by low ATP concentrations through lowering the enzyme's affinity for fructose 6-phosphate, the other substrate. Phosphofructokinase was similarly inhibited by citrate and other tricarboxylic acid cycle intermediates.
During gluconeogenesis, which of the these enzymes requires ATP?The reactions of gluconeogenesis, starting with pyruvate, are as follows: Pyruvate carboxylase uses the mitochondrion to carboxylate pyruvate to create oxaloacetate. Pyruvate carboxylase needs biotin as a cofactor and ATP as such an activating molecule.
To know more about concentrations visit :
https://brainly.com/question/10725862
#SPJ4
which phrase describes an atom?
(1) a negatively charged nucleus surrounded by positively charged protons
(2) a negatively charged nucleus surrounded by positively charged electrons
(3) a positively charged nucleus surrounded by negatively charged protons
(4) a positively charged nucleus surrounded by negatively charged electrons
The correct phrase that describes an atom is option 4. a positively charged nucleus surrounded by negatively charged electrons.
What is an atom ?Atoms are the basic units of every substance in the universe. Atoms are composed of subatomic particles electrons, protons and neutrons. The core of an atom is called the nucleus.
The positively charged protons and neutral particles neutrons are located inside the nucleus. The negatively charged electrons are revolving around the nucleus.
The electrons experience an electrostatic attraction from the protons and the nuclear pull from the center which keeps it surrounding the atom. hence option 4 is correct.
Find more on atoms:
https://brainly.com/question/13654549
#SPJ1
Which two of the following are common methods to inhibit sugar crystallization in non-crystalline candy making
Two common methods to inhibit sugar crystallization in non-crystalline candy making are:
1. adding a small amount of an inverted sugar, such as glucose or corn syrup, to the recipe
2. adding a substance known as a "seed crystal," such as a small amount of already-formed sugar crystals, to the candy mixture during the cooking process.
Some unicellular organisms are sealed in a bottle with water, CO2, and some inorganic nutrients. Which of these is not a valid conclusion?A. If they grow only in sunlight, they could be eukaryotes or prokaryotesB. If they don?t grow in sunlight or in darkness, they could be eukaryotesC. If they grow in the dark or light after you add organic compounds, they could be eukaryotesD. If you add organic compounds and they grow only in sunlight, they must be eukaryotesE. If they grow in the dark after you add organic compounds, they could be prokaryotes
Some unicellular organisms are sealed in a water bottle with CO2 and some inorganic nutrients. B) If they don't grow in sunlight or in darkness, they could be eukaryotes is not a valid statement.
In unicellular organisms, oxygen diffuses through the cell membrane into the cell. Carbon dioxide diffuses out of the cell as soon as the carbon dioxide concentration inside the cell is higher than outside the cell. Some microorganisms, including some bacteria and fungi, can survive without oxygen. Single-celled organisms rely on diffusion to obtain some of the resources necessary for life and to remove waste products. It is no coincidence that almost all single-celled organisms live in water-based environments where dissolved nutrients are readily available just outside the cell membrane.
Learn more about the unicellular organism in
https://brainly.com/question/15299967
#SPJ4
Three compounds contain the elements sulfur, S, and fluorine, F. How does the following data
support the law of multiple proportions?
Compound A: 1.188 g F for every 1.000 g S
Compound B: 2.375 g F for every 1.000 g S
Compound C: 3.563 g F for every 1.000 g S
The elements fluorine, F, and sulfur, S, are both found in three different compounds. The concepts outlined there in law of many proportions are supported by these examples.
Describe compounds.A material created through the chemical bonding of two or more distinct components. Examples of compounds are potassium salts (NaCl), which is generated from the chemicals both sodium and chloride, as well as freshwater (H2O), which is created from the components both hydrogen and oxygen.
What are fundamental compounds?In general, bases are substances that could neutralized a small amount of acid. Chlorine and sodium citrate are both bases even though neither of them includes OH groups.
When a specific mass of S and several quantities of F are combined,
ratio = Compound B and Compound A
= 2,
= 2.375 g/1.188 g
= 2
ratio between the fluorine masses = 3,
= 3.563 g/1.188g
= 3
To know more about compounds visit:
https://brainly.com/question/23846967
#SPJ1
for the reaction below: a. estimate the gas phase enthalpy change using bond dissociation enthalpies from the owl chemistry tables/appendix (button on the left). include algebraic sign and units. b. is the reaction exothermic or endothermic? c. is the reaction likely to proceed spontaneously in the direction written? : mark this question for later review.
a) DH^ r x n=-1∅7 k/ m o l
b) As DH is negative so it is exothermic.
c) it proceeds spontaneous in forward direction.
A) ch3 ch3
| |
CH3-C-CH3 +Br^2 .CH3-C-CH3
| |
H Br
+H-BR.
DH^ r x n=Σ Bonds^ broken-Bonds^ formed
=DH(C-H)+DH(Br-Br)
=-DH(C-Br)+DH(H-Br)
=263+192-(366+276)
DH^ r x n= 455-642
DH^ r x n=-1∅7 k/ m o l
b) As DH is negative so it is exothermic.
c) it proceeds spontaneous in forward direction.
The liquid/gas phase change, like the solid/liquid phase change, requires energy. The enthalpy of vaporization (or heat of vaporization) is the amount of energy required to convert a liquid to a gas,
denoted as H v a p.
To learn more about gas enthalpy
https://brainly.com/question/13161589
#SPJ4
a 2.815-g sample of cuso4 . xh20 was heated until all of the water was removed. calculate the percentage water of hydration and the formula of the hydrate if the residue after heating weighed 2.485g.
There was a water loss of 0.33 g (2.815 g - 2.485 g).
The mass of the water lost is now divided by the quantity of hydrate consumed, giving the proportion of water in the compound. After that, doubling this percentage by 100 yields the hydrate's water content in percent.
(0.33 g / 2.815 g)(100) = 11.72 or 12%
How does hydration affect the body?The restoration of body fluids lost by sweating, breathing out, and getting rid of waste is known as hydration. Every day, the body loses and replaces roughly 2-3 quarts of water.
Water is the best hydration agent.According to research, milk is among the finest drinks for hydration, even better than water and sports drinks. Researchers compare milk's benefits to its unique electrolytes, carbohydrate, or cholesterol.
To know more about Hydration visit:
https://brainly.com/question/11202174
#SPJ4
Hot filtration is a technique in which the mixture is heated and all the glassware is also heated for the filtration. When should you use the technique of hot filtration? Select one:O When you are separating a highly soluble solid from an insoluble solid O When you are separating a slightly soluble solid from an insoluble solid O When you are separating two solids with different boiling points O When you are separating two insoluble solids
The process of "hot filtration" involves heating both the mixture and all of the glassware used in the filtering. When you are separating a slightly soluble solid from an insoluble solid.
A type of filtration called hot filtration involves heating both the sample and the filter apparatus while it is being used. When there are contaminants in the solution, hot filtering is required for recrystallization. Recrystallization requires a hot solution because crystals must form upon cooling in a supersaturated solution. Because most solids are more soluble at higher temperatures, hot solutions can hold more solute in suspension than cold ones. This indicates that a saturated solution created at a higher temperature than at a cold temperature will have more dissolved solute. The heated solution will be supersaturated when it cools because it will hold more dissolved solute than its cold counterpart would.
To know more about hot filtration click here
https://brainly.com/question/26391720
#SPJ4
a 10.0 ml sample of 0.145 m sulfuric acid is titrated to its endpoint with 15.76 ml of naoh. calculate the naoh concentration.
After solving the equation the concentration of the NaOH is 1.576 mol/L.
What is concentration?Concentration is the ability to focus on one particular thing at a given time. It requires intense focus, mental discipline and effort, as well as the ability to ignore distractions and any other thoughts that may arise. It is an important skill to have in order to accomplish goals and tasks, both in school and in life. It involves being able to focus on the task at hand for an extended period of time, without getting sidetracked or losing focus.
The concentration of the NaOH can be found by using the following equation:
Molarity = (Volume of Titrant (mL) * Molarity of Titrant (mol/L)) / Volume of Sample (mL)
In this case, Molarity = (15.76 mL * 1 mol/L) / 10.0 mL = 1.576 mol/L
Therefore, the concentration of the NaOH is 1.576 mol/L.
To learn more about concentration
https://brainly.com/question/28564792
#SPJ4
predict: colligative properties are determined solely by the number of solute particles in the solution. based on this fact, which solute do you expect to have the greatest effect on the properties of water? the least effect?
They move at various speeds and bounce off one another. Being slower than air, though. Although they stop moving, the water molecules remain in motion. Slowing down, the Air. Water molecules—both those in the liquid and the vapor state—are travelling quickly.
What's a short way to describe molecules?a substance's tiniest particle possesses all of its physical and chemical characteristics. A single atom or more make up a molecule.
What are the different types of molecules?The tiniest particle in such a chemical compound or element that possesses the chemical characteristics of that compound or an element is known as a molecule. Atoms are the building blocks of molecules, and chemical bonds are what hold them together. Two different types of molecules exist: An element's molecules An element is composed up of molecules.
To know more about molecules visit:
https://brainly.com/question/19556990
#SPJ4
Consider the following tetra-substituted cyclohexane: a. Draw both chair conformations of this compound. b. Determine which conformation is more stable. c. At equilibrium, would you expect the compound to spend more than 95% of its time in the more stable chair conformation? Show any necessary calculations.
The conformation with the axial methyl and chlorine substituents is more stable.
What is chlorine substituents?Chlorine substituents are chemical groups or molecules that are attached to other molecules or substances, typically through a covalent bond.
Since the axial methyl and chlorine substituents are more stable, the compound would spend more than 95% of its time in this conformation. To calculate this, we can use the Boltzmann equation.
ΔG = -RTlnK
Where K is the equilibrium constant.
K = e-ΔG/RT
For a temperature of 25°C, R=8.314 J/K⋅mol.
ΔG = -8.314⋅25⋅lnK
If we assume that K is greater than 95%, then lnK must be a positive number.
lnK = ΔG/8.314⋅25
ΔG = 8.314⋅25⋅ln95
ΔG = 44.2 kJ/mol
Therefore, the compound will spend more than 95% of its time in the more stable conformation if the energy difference between the two conformations is greater than 44.2 kJ/mol.
To learn more about chlorine substituents
https://brainly.com/question/13016475
#SPJ4
Complete this table relating the values of Ecell and ΔG to the Q/K ratio
Q/K Ecell ΔG
<1
=1
>1
Drag these labels into table as appropriate:
>0, =0, <0
The finished table is provided below: Q/K Ecell delta G, 1 >0 0, =1 =0 =0, and >1 0 >0.
What in chemistry is an E cell?Hint: In electrochemistry, the potential difference between the two half cells is measured by the term "E cell." Electrons go from one half cell to the other due to this potential difference. By applying the Nernst equation, it may be determined.
Ecell in the Nernst equation: what is it?Ecell is the cell's potential. E0 is the potential of a cell under ideal circumstances. R is the constant of all gases. T is the temperature. n is the total number of electrons moved during the redox reaction.
To know more about Ecell visit:
https://brainly.com/question/3807566
#SPJ4
if 0.16 mole of hco- is placed into 1.00 l of solution, what will be the equilibrium concentration of co3 2-
According to the question: At equilibrium, the concentration of CO3 2- will be 0.16 moles/L.
What is equilibrium?Equilibrium is a state of balance between two opposing forces. It is a state of rest or balance caused by the equal action of opposing forces. This can be found in many areas of daily life, from the economy to chemical reactions. In economics, equilibrium occurs when supply and demand are equal and in balance, resulting in a market price that does not change.
This is because the reaction of HCO- and CO2 can be described as a simple one-to-one reaction:
HCO- + CO2 <---> H2CO3 <---> H+ + CO3 2-
Since the amount of HCO- and CO2 are equal, the amount of CO3 2- produced will also be equal. Therefore, the equilibrium concentration of CO3 2- will be 0.16 moles/L.
To learn more about equilibrium
https://brainly.com/question/28158922
#SPJ4
What do l talk about on my timelines?
Timelines are intended to give a general perspective of a series of historical events. Although they don't go into great length, as necessary, connections to photographs, information, and events may be added.
What are Timelines?History textbooks and biographies frequently employ timelines to illustrate what occurred over a specific time period or to a specific person, beginning with the earliest event and going ahead in time. For instance, your own personal chronology can start with your birth.
Timelines are meant to provide a broad overview of a number of historical events.
There may be connections to images, facts, and events, albeit they don't go into great detail unless essential.
Thus, this way, one can have their timeline.
For more details regarding timeline, visit:
https://brainly.com/question/20838835
#SPJ1
2. atoms are typically spaced about 0.2 nm apart. at that spacing, how many atoms would be found in a line 2.5 inches long?
The number of atoms would be found in a line 2.5 inches long is 3.17510^12 atoms
What three sorts of atoms are there?The three fundamental types of particles that comprise an atom are protons, electrons, and neutrons. Protons and neutrons generally have the same mass, however the mass of the electron is quite small. A negative has no charge, while a proton has a positive charge.
2.5 inches is equal to about 63.5 centimeters.
There are 10^10 nanometers in one centimeter.
=> (10^10)x(63.5) = 6.3510^11 nanometers
At an atom spacing of 0.2 nanometers:
=>6.3510^11 / 0.2 = 3.17510^12 atoms in a line
To know more about atoms visit:
brainly.com/question/1566330
#SPJ4
Which of the following is true for the solubility of NaCl(s) and CH4(g) in water? A. Increasing the temperature will increase the solubility of CH4 B. Increasing the temperature will decrease the solubility of NaCl C. Both NaCl and CH4 are very soluble in water D. Neither NaCl nor CH4 are very soluble in water E. None of the above
That solubility of NaCl will decline as the temperature rises; this is also true of the solubility of CH4 and NaCl(s) in water.
What exactly is solubility?The biggest concentration of a solvent that may disintegrate in a liquid at a specific temperature is known as solubility. The water is deemed saturated when the solute concentration reaches its maximum. Mol/L or g/L quantities of immersion can be given.
What elements influence solubility?The maximum quantity of an ingredient that should dissolve in a solvent at a particular temperature is known as its solubility. Temperature and pressure are the two direct variables that impact solubility. Pressure solely influences the concentration of dissolved oxygen, but temperatures affects the dissolution both of solids and gases.
To know more about solubility visit:
https://brainly.com/question/28170449
#SPJ4
calculate the distance in metes covered by lining up 57.01 grams of hydrogen atoms side by side (show work for dimensional analysis pleaseee)
The distance in meters that would be covered by lining up 57.01 grams of hydrogen atoms side by side will be 4.1197 x [tex]10^{17[/tex] m.
Number of atoms in a mass sampleAccording to Avogadro, 1 mole of a substance will contain 6.022 x [tex]10^{23[/tex] atoms. Thus, the first step would be to find the total number of hydrogen atoms that is present in the 57.01 grams sample.
Mole = mass/molar mass
Mole of 57.01 grams of hydrogen = 57.01/1
= 57.01 moles
1 mole = 6.022 x [tex]10^{23[/tex] atoms
57.01 moles = 6.022 x [tex]10^{23[/tex] x 57.01
= 3.4331 x [tex]10^{25[/tex] atoms
Now, each atom of hydrogen has a diameter of 1.2 x [tex]10^{-10[/tex] m.
The total distance that would be covered, in meters, when 3.4331 x [tex]10^{25[/tex] atoms of hydrogen are lined side by side would be:
1.2 x [tex]10^{-10[/tex] x 3.4331 x [tex]10^{25[/tex] = 4.1197 x [tex]10^{17[/tex] m
In other words, the distance in meters that would be covered by lining up 57.01 grams of hydrogen atoms side by side will be 4.1197 x [tex]10^{17[/tex] m.
More on Avogadro atoms can be found here: https://brainly.com/question/28834341
#SPJ1
“Write a disassociation equation for each of the following”
(Also please write an explanation on how you did it)
Answer:
The dissociation equation for MgCl2 in water is MgCl2 arrow Mg2+ + 2Cl-.
Looking at the formula Al(NO3)3, we notice that for one Al ion, there are three NO3 ions. Therefore when aluminum nitrate dissociates in water, it produces one aluminum ion and three nitrate ions per each formula unit.
Al(NO3)3 (aq) + 3 H2O (l) → 3 HNO3 (aq) + Al(OH)3 (s)
2HNO3⇌NO2++NO3−+H2O.
Violet has found a container of aluminum bromide that says it contains 3.09 moles of AlBr3. What is the mass of this sample of aluminum bromide? Please round your answer to two digits after the decimal point, and remember to include correct, complete units (including substance formula).
The mass of 3.09 moles of [tex]AlBr_3[/tex] would be 825.03 grams.
Calculating mass from molesThe number of moles present in the mass of a substance is the ratio of the mass of the substance and the molar mass of the substance.
In other words, mole = mass/molar mass. Making the mass the subject of the formula:
mass = mole x molar mass.
Molar mass of [tex]AlBr_3[/tex] = 267 g/mol
Mass of 3.09 moles [tex]AlBr_3[/tex] = 3.09 x 267
= 825.03 grams
In other words, the mass of the 3.09 sample of aluminum bromide would be 825.03 grams.
More on mole and mass of substances can be found here: https://brainly.com/question/21042927
#SPJ1
question mode multiple choice question an unknown element has two isotopes: one whose mass is 68.926 amu (60.00% abundance) and the other whose mass is 70.925 amu (40.00% abundance). the average atomic mass of the element is equal to .
The average atomic mass of the element is calculated to be 69.7256 amu.
What is average atomic mass?The average atomic mass of an element is the weighted average mass of atoms in naturally occurring sample of the element.
Given, atomic mass of isotope-1 = 68.926 amu ; percent abundance of isotope-1 = 60.00% ; atomic mass of isotope-2 = 70.925 amu ; percent abundance of isotope-2 = 40.00%
Fractional abundance of isotope-1 = 0.6000
Fractional abundance of isotope-2 = 0.4000
Average atomic mass of an element = A
A = ∑ [Atomic mass of an isotope + fractional abundance of isotope]
A= 69.7256 amu
So, the average atomic mass of the element is equal to 69.7256 amu.
To know more about average atomic mass, refer
https://brainly.com/question/24666479
#SPJ4
Which of the following is correct order from smallest to biggest
Sorry this question is incomplete.
A 25 cm3 sample of hydrochloric acid with an unknown concentration was titrated against a solution of sodium hydroxide with a concentration of 0.1 mol/dm3. It took exactly 23.5 cm3 of sodium hydroxide to neutralise the acid.
i. Write the balanced equation for the reaction.
ii. How many moles of HCl must be present in the 25 cm3 sample? Explain how you
reached this value.
iii. Calculate the concentration of the HCl solution.
Answer: it is b i got it right on the test
Explanation:
