Answer:
I hope my answer is good!
Kinetic energy: The increase in weight of the people would result in an increase in the kinetic energy of the roller coaster. As the roller coaster moves through the track, it gains kinetic energy as it goes downhill, and this energy would be greater if the people were heavier.
Potential energy: The increase in weight of the people would result in an increase in the potential energy of the roller coaster. As the roller coaster climbs uphill, it gains potential energy, and this energy would be greater if the people were heavier.
Friction: The increase in weight of the people would result in an increase in the friction between the roller coaster and the track. More weight would create more wear and tear on the track and would make the roller coaster ride less smooth.
The volume of a block of iron is 9 cc and its mass is 70.83 g. What would be the volume of a block of aluminum that has the same mass as the block of iron? (The density of aluminum is 2.70 g/cc).answer choices24.30 cc26.23 cc70.83 cc191.24 cc
The volume of a block of aluminum that has the same mass as a block of iron would be 26.23 ccs.
To find the volume of a block of aluminum that has the same mass as a block of iron, we need to use the formula:
Density = Mass/Volume
Given that the density of aluminum is 2.70 g/cc, we can find the volume by rearranging the formula:
Volume = Mass/Density
Since the mass of the block of iron is 70.83 g, we can substitute this into the formula:
Volume = 70.83 g / 2.70 g/cc = 26.23 cc
So the volume of a block of aluminum that has the same mass as the block of iron would be 26.23 ccs.
To learn more about Volume,
https://brainly.com/question/28795033
#SPJ4
31 Consider Earth to be stationary, and the Moon as orbiting Earth in a circle of radius R. If the masses of Earth and the Moon are Mg and MM respectively. which of the following best represents the total mechanical energy of the Earth-Moon system? (A s GM MM 2 R GMEM GMEM GM MM 2GMEMM (C)2R
2R is the best represents the total mechanical energy of the Earth-Moon system.
What term do you use instead of mechanically?The words automatic, impulsive, instinctual, and spontaneous are some typical substitutes to mechanical. While all of these terms refer to "doing or engaging without deliberate action," mechanical emphasizes how lifeless and frequently mechanical the response is. When mechanical may not be the best choice.
What does the term "technological thinking" mean?What does mechanical thinking entail? When pupils think mechanically, their brains just repeat thought loops without giving them any consideration. Children could automatically think, "I'm not strong at arithmetic," for instance. They simply remember it everytime they encounter a math problem.
Toral potential energy of earth and moon=-G*Me*Mm/R
Velocity of moon=sqrt(GMe/R)
Kinetic energy of moon=0.5*Mm*v^2=0.5*G*Me*Mm/R
Total energy=-GMe*Mm/2R
To know more about mechanical visit:
https://brainly.com/question/23561157
#SPJ4
a hypothetical planet has a mass of twice that of the earth and a radius of four times that of the earth. what is the acceleration due to gravity on the planet in terms of g, the acceleration due to gravity at the earth?
The acceleration due to gravity on the planet will be 8g.
What is gravity?Gravity is the force of attraction between objects that is exerted by the masses of those objects. It is the weakest of the four fundamental forces in nature and is most noticeable when two objects of significant mass interact. On Earth, gravity is what keeps us firmly rooted to the ground and is what causes objects to fall when we drop them. It is also what causes the moon to orbit around the Earth and the planets to orbit around the sun.
This is because the acceleration due to gravity is directly proportional to the mass of a body and inversely proportional to the square of its radius. This means that if the mass of a body is doubled and its radius is quadrupled, the acceleration due to gravity will be 8 times the acceleration due to gravity at the Earth.
Therefore, the acceleration due to gravity on the planet will be 8g.
To learn more about gravity
https://brainly.com/question/88039
#SPJ4
The acceleration due to gravity on the planet will be g/8
What is gravity?Gravity is the force of attraction between objects that is exerted by the masses of those objects. It is the weakest of the four fundamental forces in nature and is most noticeable when two objects of significant mass interact. On Earth, gravity is what keeps us firmly rooted to the ground and is what causes objects to fall when we drop them. It is also what causes the moon to orbit around the Earth and the planets to orbit around the sun.
This is because the acceleration due to gravity is directly proportional to the mass of a body and inversely proportional to the square of its radius.
As we know,
Charge (q) = GM/R²
Here, R = radius of the planet
M = mass of the planet
G = Gravitational constant
Now, after putting the values we get:
q = (G × 2me) / (4ve)²
or, q = 1/8 (Gme/ve²)
or, q = 1/8 × g
Therefore, the acceleration due to gravity on the planet will be g/8
To learn more about gravity refer to:
brainly.com/question/88039
#SPJ4
Can anyone help me in this question
Answer:
a. 300 Ω
b. 0.01 A
Explanation:
a. since they are connected in series, the total resistance is equal to sum of both resistors
R' = 100Ω + 200Ω
R' = 300Ω
b. current = voltage/resistance
I =[tex]\frac{3}{300} = \frac{1}{100}[/tex] = 0.01
If the net force applied by the truck ramp in the previous question is -300,000 N, how far along the ramp will the truck move as it stops?
The distance travelled by the truck before coming to a stop is 72.9 m.
What is the acceleration of the truck?
The acceleration of the truck is calculated by applying Newton's second law of motion as follows.
F = ma
a = F / m
where;
F is the net forcem is the massa = ( -300,000 ) / ( 60,000)
a = -5 m/s²
The distance travelled by the truck before coming to a stop is calculated as follows;
v² = u² + 2as
where;
v is the final velocity when the truck stops = 0u is the initial velocity of the trucks is the distance travelled0 = u² + 2as
0 = (27²) + (2)(-5)(s)
= (27²) - 10s
10s = 27²
s = ( 27² ) / 10
s = 72.9 m
Learn more about distance travelled here: https://brainly.com/question/24283318
#SPJ1
the analysis of a falling object in a gravitational field is analogous to a charge falling in an electric field suppose that a particle of mass 1.75 x 10 5 kg and charge 2.00 x 10 3 c is present in a uniform electric field that points in y direction and has a strength of 400 n c what is the ratio of the magnitude of the electric force exerted on the particle to the magnitude of the gravitational force exerted on the particle
The ratio of the magnitude of the electric force to the magnitude of the gravitational force exerted on the particle is 3.43 x 10^6.
What is gravitatonal force?Gravitational force is a fundamental force of nature that causes objects to be drawn to each other. It is the force that keeps us on the ground and keeps the planets in their orbits around the sun. It is an attractive force between two masses and is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. This means that the closer two objects are, the greater the gravitational force is between them.
The ratio of the magnitude of the electric force to the gravitational force is equal to the ratio of the charge squared to the mass of the particle.
In this case, the ratio is equal to:
(2.00 x 10^3 c)^2 / (1.75 x 10^5 kg) = 3.43 x 10^6.
Therefore, the ratio of the magnitude of the electric force to the magnitude of the gravitational force exerted on the particle is 3.43 x 10^6.
To know more about Gravitational force click-
https://brainly.com/question/72250
#SPJ4
which free ai model can i use to generate cool avatar similar to lensa ai images from one of my headshots?
Lensa is the free AI model you can use to generate cool avatar similar to lensa, AI images from one of my headshots.
Lensa generates its avatars using Stable Diffusion, an open-source AI model that generates images based on text prompts. Stable Diffusion is built using LAION-5B, a massive open-source data set that has been compiled by scraping images off the internet. With AI Avatar Generator, you can easily generate a realistic-looking avatar of yourself or anyone else. All you need to do is upload a photo of the person you want to create an avatar of and the generator will automatically generate an AI-generated avatar that looks almost like the real person. the avatar creation is used for social media blogs or any other of the web pages. by this primary information, we can firmly conclude that Lensa is the free AI model you can use to generate cool avatar similar to lensa, AI images from one of my headshots.
Learn more about AI systems:
brainly.com/question/12361067
#SPJ4
for each of the situations given, state whether frictional forces do positive, negative, or zero work on the italicized object. hint (a) a plate slides across a table and is brought to rest by friction. positive negative zero (b) a person pushes a chair at constant speed across a rough, horizontal surface. positive negative zero (c) a box is set down on a stationary conveyor belt. the conveyor belt is then turned on and the box begins to move, being carried along by the belt. positive negative zero (d) a person exerts a horizontal force on a banana at rest on a counter top. the banana remains at rest. positive negative zero
Concept: If the (frictional) force and the displacement are the same, then the work will be positive and (a) and (b) have negative values. (c)has positive (d) has zero.
What does physics mean by displacement?An object's directional movement if it moves in relation to a reference frame, such as when a passenger moves to the back of an airplane or a lecturer moves to the right in relation to a whiteboard. Displacement describes this shift in location.
Can there be zero displacement?A body that goes a distance and then returns to its initial location has the same starting and ending points. In this case, the displacement is 0 but the distance covered is not. It is possible to have positive, negative, or even zero displacements.
To know more about displacement visit :
https://brainly.com/question/15606977
#SPJ4
a roller coaster ride at an amusement park has a radius of 7.5 m. at what velocity must the coaster be moving at the top of the loop in order for the passengers to stay in their seats as it reaches the top of the arch?
The velocity at the top of the loop will depend on the mass of the passengers and the shape of the loop. Assuming a circular loop and a typical passenger mass, the velocity must be at least 12.2 m/s.
What is the mass ?
A particular object's mass is a measurement of its amount of matter. It is typically expressed in grams (g) or kilograms (kg). Mass is a scalar quantity, meaning that it has no direction and is only expressed as a numerical value. Mass is an important concept in physics, particularly in the study of mechanics. Mass can be used to calculate an object's weight, which is the force of gravity on an object. Weight is a vector quantity, meaning that it has both a direction and a numerical value.
To learn more about mass
https://brainly.com/question/28021242
#SPJ4
What would be the name of the isotope if an atom of aluminum has 13 protons and 15 neutrons?.
According to the periodic table, aluminum has an atomic number of 13 and 13 protons, so an atom with 13 protons and 15 neutrons is an isotope of aluminum.
Aluminum is a silver-white light metal. Soft and easy to play. Aluminum is used in a variety of products including cans, foils, kitchenware, window frames, beer kegs, and aircraft components. One isotope of aluminum, aluminum 26 (26Al), contains 13 protons and 13 neutrons in its nucleus. Unlike the stable isotope aluminum 27, which contains an extra neutron, 26Al is radioactive and decays with an exponential lifetime of about 1 million years.
Learn more about aluminum in
https://brainly.com/question/19761029
#SPJ4
a solid sphere, a solid cylinder, and a hollow cylinder are placed at the top of an inclined plane. if all are made of the same material and are released at the same time, which one will reach the bottom first? group of answer choices the solid cylinder. the sphere. the hollow cylinder.
The solid sphere will reach the bottom of the inclined plane first. The reason for this is that the sphere has the smallest surface area to volume ratio which means that there is less friction acting on it as it rolls down the incline.
Which moves more quickly, a sphere or a cylinder?Solid sphere moves more quickly than solid cylinder because it has a lower moment of inertia and more kinetic energy during translation. Comparable solid objects move more slowly than hollow ones.
Which reaches the bottom first, the cylinder or the sphere?If a cylinder and a sphere have the same mass and radius, the cylinder will have a greater moment of inertia due to its greater mass at its edges. Because the sphere's moment of inertia is smaller, it will move faster and arrive at the bottom first.
What causes a hollow cylinder to roll more slowly?The process by which potential energy (PE) is transformed into kinetic energy is the cause of the solid cylinder's faster descent than the hollow cylinder. Some of the PE is transformed to rotating kinetic energy (RKE), not simply linear kinetic energy, because the cylinder is rolling (LKE).
To know more about kinetic energy visit:
https://brainly.com/question/8101588
#SPJ4
why do scientists suspect that most of our galaxy's mass consists of dark matter? drag the terms on the left to the appropriate blanks on the right to complete the sentences.
It is because there is too much gravity for the physical mass in the cosmos to account for, which implies that secret (dark) mass-adding must be taking place to fill in the missing mass and explain the gravity level of the universe.
What materials makes up dark matter?Dark matter can't be found by measuring electromagnetic radiation since its particles don't absorb, reflect, or emit light. Material that cannot be immediately observed is known as dark matter. Due to the impact it has on directly visible objects, we are aware that dark matter exists.
What occurs if dark matter collides with Earth?Dark matter particles have the ability to pass through all other types of matter, which suggests that they may even be able to pass through our globe without losing any energy at all. On the other side, their collision with the common material that makes up Earth could cause them to suffer a minor setback and lose some energy.
To know more about Dark Matter visit
brainly.com/question/4444128
#SPJ4
Use the motion map to answer the question. A motion map. The position line is a long black arrow pointing right, labeled x. Above the line are 2 dots with a vector pointing away from x that start at x, each one shorter. Above that are two yellow vectors pointing toward x, each positioned to the left of a dot. A vertical row of 3 black dots appear in the center of the position line, where the bottom dot is aligned with the yellow arrows and the top dot has a vector pointing away from the origin. There is one other dot with a longer vector arrow to the right of the top dot. Above this line are 2 yellow arrows pointing away from the origin. Which scenario could be represented by the motion map
The motion map could represent a situation in which a car is accelerating to the right, then slowing down, and then speeding up again.
What is the motion ?
Motion is the action or process of moving or being moved from one place to another. It is a fundamental concept in physics that describes a change in position over time. Motion can be explained with the use of Newton's laws of motion and can be mathematically described by equations of motion. Motion can be observed in everyday life, such as the motion of a car, a ball falling to the ground, and the motion of a pendulum. Motion is an integral part of many scientific fields, including physics, chemistry, astronomy, and mathematics. Motion can also be studied in art, literature, and music.
To learn more about motion
https://brainly.com/question/26083484
#SPJ4
The change in the viscosity of a melt is directly proportional to the change in Choose one or more:
A.silica content.
B.carbon dioxide.
C.water content.
D. temperature
All of the options are valid; a melt's viscosity changes in a direct relationship with its silica content, carbon dioxide content, water content, and temperature.
What is a simple explanation of viscosity?Low viscous fluids flow easily because thier molecular structure causes minimal to no friction when they are in action. Viscosity also exists in gasses, however it is less obvious in typical situations.
Is viscosity a liquid or a solid?Another form of bulk attribute called viscosity is the resistance of a liquid to flow. A liquid has a higher viscosity when the forces of attraction within it are strong. Imagine two liquids competing for the first place in a race down a windshield to understand this phenomenon.
To know more about viscocity visit :
https://brainly.com/question/2193315
#SPJ4
how large an angle in radians and degrees does the diameter of the moon subtend to a person on the earth
The 0.54° large an angle in radians and degrees does the diameter of the moon subtend to a person on the earth.
What is radian ?
One radian is defined as the angle that is subtended at its center by an arc of length one unit in a unit circle (a circle with radius one unit). The radian unit of measurement is represented by the letters "rad" or "c".
What is diameter ?
The line through a circle's center with two extremes on its circumference is said to have a diameter. The term "semi-circle" refers to the division of a circle into two equal sections by its diameter. A circle's center is where its diameter meets.
Therefore, 0.54° large an angle in radians and degrees does the diameter of the moon subtend to a person on the earth.
Learn more about radian from the given link.
https://brainly.com/question/19278379
#SPJ4
what is the magnitude of the gravitational force of attraction between two 0.425 kilogram soccer baalls
Two 0.425 kilogram soccer balls are attracted to one another by a gravitational force with an intensity of [tex]F =4.82*10^{-5}[/tex].
We must apply the equation shown below to calculate the gravitational force (F), All objects with mass are attracted to one another by the gravitational attraction, which has a magnitude that is directly proportional to the masses of the two objects and inversely proportional to the square of their distance from one another.
Therefore, the only unit left is meters kilograms per second squared, which is equal to newtons. Therefore, the gravitational force between the Earth and the Moon is 1.98 x 10^(-20) newtons.
Here magnitude in terms of force:
[tex]F=Gm_{1} m_{2}/r^{2} \\F = (6.67*10^{-11} * 0.425* 0.425)/0.5^{2} \\F =4.82*10^{-5}[/tex]
Learn more about magnitude Visit : brainly.com/question/24468862
#SPJ4
if the object is pushed a distance d and then pushed back to orgiinal position, what is the work done by frication
The work done by friction is μNd.
what is wotk done?
Work done is the amount of energy transferred by a force to an object when it moves through a distance.
It is calculated by multiplying the force applied to the object by the distance it moves.
Work done is measured in joules (J) and is represented by the equation W = F x d.
Work done by friction = Force x Distance
= Friction coefficient (μ) x Normal Force (N) x Distance (d)
= μNd
Therefore, The work done by friction is μNd.
To learn more about work done
Here: https://brainly.com/question/25573309
#SPJ4
while in europe, if you drive 113 km per day, how much money would you spend on gas in one week if gas costs 1.10 euros per liter and your car's gas mileage is 32.0 mi/gal ? assume that 1 euro
The 80.50 dollars would you spend on gas in one week if gas costs 1.10 euros per liter and your car's gas mileage is 32.0 mi/gal.
One mile is how many kilometres?To convert a given amount expressed in terms of unit miles to unit kilometres, use the miles to km formula. There are 1.6 kilometres in a mile.
What is a euro?The currency and monetary unit of the European Union is the euro, denoted by the sign €. Prior to being released as currency notes and coins in 2002, it started out as a noncash monetary unit in 1999. The national currencies of participating EU members and certain non-EU states were replaced by the euro.
Calculation:
Total km so 113km per day for 7 days is 791 km.
Then we change 791km to miles = 491.211 miles.
Since the car is 32 miles per gallon we divide 491.211/32= 15.35 gallons.
We change gallons to liters so we have 15.35gal x 3.785L= 58.09 L
At 1.10 euros per liter is 58.09 x 1.10 = 63.89 euros.
Assume 1 euro =- 1.26 dollars
Change euros to dollars 63.89 x 1.26 = 80.50 dollars.
To know more about euro visit:
https://brainly.com/question/5457022
#SPJ4
Part A What is the strength of the magnetic field at the center of the loop in the figure? (Figure 1) Express your answer to two significant figures and include the appropriate units.B= Value SubmitProblem 32.48 Assume that I=4.8A and d = 1.6cm.
The equation B=μ0I/2R, where R is the loop's radius, describes how strong the magnetic field is in the loop's center. The direction of the field with regard to the loop is provided by RHR-2. so, B= [tex]9.65097263\times10^{-6}[/tex]
The magnetic field strength is one of two metrics used to describe a magnetic field's intensity.
Technically, a difference is made between magnetic field strength H, measured in amperes per meter (A/m), and magnetic flux density B, commonly known as teslas, measured in Newton-meters per ampere (Nm/A) (T).
The magnetic field is depicted by magnetic field lines. The field strength and the density of the field lines are correlated.
The total number of magnetic field lines in a particular area is known as the magnetic flux.
B=[tex]=4\Pi \times 10^{-7}\times 4.8 \times 1.6[/tex]
B= [tex]9.65097263\times10^{-6}[/tex]
For such more question on magnetic field .
https://brainly.com/question/7802337
#SPJ4
the hanging mass is referred to as m and it sets the centripetal force. T/F
The given statement that hanging mass is referred to as m and it sets the centripetal force is, false.
What's Centripetal force?Centripetal force is the force acting on an object in curvilinear shifting directed towards the axis of rotation or centre of curvature. Any shifting in a bending path represents accelerated motion, and requires a force directed toward the center of curve of the path.
The centripetal force is delivered by the tension in the string, not the hanging mass. The hanging mass, m, creates a gravitational force pulling downward, but it's the tension in the string pulling the mass towards the center of the circle that provides the centripetal force.
To know more about Force, visit:
https://brainly.com/question/28875770
#SPJ4
Unpolarized light with intensity 350 W/m^2 passes first through a polarizing filter with its axis vertical, then through a second polarizing filter. It emerges from the second filter with intensity 126 W/m^2 .What is the angle from vertical of the axis of the second polarizing filter? Express your answer to two significant figures and include the appropriate units.
The angle from vertical of the axis of the second polarizing filter is found to be be 32.9°.
Why would you use a polarizing filter?Your camera's polarizing filter reduces sparkling reflections. The same principles apply to polarising sunglasses. Your eyes are shielded from glare from the road or water by polarising sunglasses. Sunglasses that are polarising can be identified. When unpolarized light strikes a polarizer, the amount of polarised light that emerges is half that of the unpolarized light that struck the polarizer in the first place.
=> I1= 350/2 = 175 w/m2.
I2 = I1 cos^2 Ф
Ф=> cos^-1 (sqrt (I2/I1))
=> cos^-1 (sqrt(126/175))
=> 32.9°.
What components make up unpolarized light?Short electromagnetic wave bursts released by several atoms make up unpolarized light. Similar to polarized light, these bursts' electric field directions are random around the wave's path of travel but perpendicular to it.
Learn more about unpolarized light here:
brainly.com/question/1601505
#SPJ4
an antitank gun is located on the edge of a plateau that is 60m above the surrounding plain. during a training exercise, an enemy tank a placed stationary on the plain and at a horizontal distance of 2.2 km from the gun. the cannon is set to an angle of 300 above the horizontal. a. a practice round is shot, and the round reaches the apex its path of travel after 12.24 s. calculate the muzzle velocity of the cannon. b. in the second training exercise, the cannon is locked into an angle of 100 above the horizontal. calculate how far away from the cliff's edge the cannon will hit. c. and this time, the tank begins to accelerate away from the gun with an acceleration of 0.9 m/s2 . calculate how long should the crew wait before firing in order to hit the tank.
An anti-tank cannon is situated 60 meters above the surrounding plain, on the edge of a plateau. An adversary tank was positioned at 89.44° during a practice exercise.
What distinguishes surrounding from around?The focus of attention is on the individual who is surrounded: "The audience gathered around the magician as he worked his magic." To be around something is to be close to it.
Calculation
In situations like this air resistance are usually been neglected thereby
making g= 9.81 m/
Bring out the given parameters from the question:
Initial Velocity () = 1000 m/s
Target distance (d) = 2000 m
Target height (h) = 800 m
Projection angle ∅ = ?
Horizontal distance = tcos ∅ .......................... Equation 1
where = velocity in the X - direction
t = Time taken
Vertical Distance = y = t - g ................... Equation 2
Where = Velocity in the Y- direction
t = Time taken
= sin∅
Making time (t) subject of the formula in Equation 1
t = d/(cos ∅)
t = = = ...................Equation 3
substituting equation 3 into equation 2
Vertical Distance = d = - g
Vertical Distance = h = sin∅ - g
Vertical Distance = h = dtan∅
- g Applying geometry
= + 1
Vertical Distance = h = d tan∅ - 2 g ( + 1)
substituting the given parameters
800 = 2000 tan ∅ - 2 (9.81)( + 1)
800 = 2000 tan ∅ - 19.6( + 1) Equation 4
Replacing tan ∅ = Q .....................Equation 5
In order to get a quadratic equation that can be easily solve.
800 = 2000 Q - 19.6 + 19.6
Rearranging 19.6 - 2000 Q + 780.4 = 0
= 101.6291
= 0.411
Inserting the value of Q Into Equation 5
tan ∅ = 101.63 or tan ∅ = 0.4114
Taking the Tan inverse of each value of Q
∅ = 89.44° ∅ = 22.37°
To know more about surrounding visit:
https://brainly.com/question/15174634
#SPJ4
n electrostatic paint sprayer has a 0.12 m-diameter metal sphere at a potential of 25.0 kv that repels charged paint droplets onto the object to be painted, which is grounded (electric potential of 0). (a) what charge is on the sphere? recall that for a spherical distribution of charge, the potential is exactly equivalent to the situation where all the charge is concentrated at the center of the sphere.
The charge on the sphere is equal to the product of the potential (25.0 kV) and the capacitance of a sphere (4πε0R).
What is the charge ?
The charge is the amount of money that a person is required to pay for a service or product. It is usually a fee that must be paid to access or use a service or product. In the case of a criminal charge, it is the amount of money that a person is required to pay in order to be released from jail or prison after being charged with a crime. Charges can also be fees charged by a business or organization for a service or product, such as a membership fee.
To learn more about charge
https://brainly.com/question/25922783
#SPJ4
This table displays information about position and time. What was the average speed of the baseball from the time it left the pitcher's hand to the time it was 7. 2 m from the pitcher's hand? question 10 options: 25. 7 m/s 50. 7 m/s 30. 2 m/s 20. 5 m/s.
The baseball moved at an average speed of 25.7 m/s from the moment it left the pitcher's hand until it was 7.2 meters away. As a result, choice (A) is the right response.
The object's average speed is the total distance it travels in a predetermined amount of time. It has a scalar value. It is characterised by the magnitude and lacks direction. You can calculate it by dividing the total distance travelled by the total amount of time needed to travel that distance.
Following are the calculations for baseball's typical speed:
the distance the ball travelled is 7.2 metres
the time taken is 0.28 seconds
Speed = Distance/Time.
Speed =7.2/0.28
=> 25.7 m/s.
Consequently, the baseball's average speed from the moment it left until it arrived was 25.7 m/s.
To learn more about Average speed :
https://brainly.com/question/14242632
#SPJ4
At time t ! 0, a ball is struck at ground level and sent over level ground.The momentum p versust during the flight is given by Fig. 9-46 (with and ). At what initial angle is the ball launched
The graph leads us to conclude that the horizontal velocity of momentum is 4.0 kg/m/s. Additionally, the momentum's initial magnitude, p0, is 6.0 kg/m/s.
In physics, what is a momentum?
Momentum is characterised as the intensity of a body's motion.As momentum depends on both velocity and the orientation of the body's motion, it is quantified by "mass velocity". Since motion is a vector and mass is a scalar, momentum is a vector. Mass times speed equals momentum.
What does the word "momentum" mean?
Momentum can be viewed as a body's "power" while it is moving, or the amount of force it can exert on another body. For instance, a fastball (small mass) thrown quickly has the same inertia as a bowling ball (big mass) going extremely slowly (low velocity) (high velocity).
To know more about momentum visit:
https://brainly.com/question/24030570
#SPJ4
a football player can accelerate at 2 m/s2. if he starts from rest, how long will it take him to travel 16 m?
It will take 8 m/s to travel the distance.
What is acceleration?The rate at which an object's velocity with respect to time changes is referred to as acceleration in mechanics. It is a vector quantity to accelerate (in that they have magnitude and direction).
The direction of the net force acting on an object determines the direction of its acceleration. According to Newton's Second Law the amount of an object's acceleration is the combined result of two causes:
According to the materials used to make the object, the magnitude of the net balance of all external forces acting on it is inversely proportional to its mass, but the magnitude of the net resulting force is directly proportional to the net force.
Therefore, It will take 8 m/s to travel the distance.
To learn more about Acceleration, refer to the link:
https://brainly.com/question/12550364
#SPJ1
an uneven arrangment of electrons and protons on a circular arc of radius with angles what are the magnitude and direction of the net electric field produced at the center of the axis
Without more information on the specific arrangement of electrons and protons, it is not possible to determine the magnitude and direction of the net electric field produced at the center of the axis. The electric field is determined by the distribution of charges and their relative positions.
What is an electric field?
An electric field is a force field that surrounds an electric charge, which exerts a force on other charges within the field. The strength of the electric field is represented by the electric field strength (E) and is measured in units of newtons per coulomb (N/C). The direction of the electric field is defined as the direction that a positive test charge would be pushed or pulled if placed in the field. The magnitude of the electric field at any point in space is defined as the force experienced per unit charge, at that point. Electric fields can be created by a variety of sources, including stationary charges, moving charges, and changing magnetic fields.
Learn more about electric field here: https://brainly.com/question/19878202
#SPJ4
what is the magnitude e of the electric field at the point on the x axis with x coordinate a/2?
According to Coulomb's law, the electric field's strength is provided by the formula E1=KQ[tex]_{2}[/tex] =Kq[tex]_{1}[/tex], where Q is the source charge on the x-axis.
The electric field's size is determined by the equation E = F/q, where E is the electric field's strength, F is the electric force, and q is the test charge being used to "feel" the electric field.
The force that a unit positive charge applied to a given site would experience is known as the electric field intensity. A vector quantity is electric field intensity. 'E' stands for it. Electric field is calculated as F/q. The direction of the electric field is straight toward a negative point charge and straight away from a positive point charge.
Learn more about magnitude Visit : brainly.com/question/24468862
#SPJ4
question the work that must be done by an external agent to move a point charge of 2 mc from the origin to a point 3 m away is 5 j. what is the potential difference between the two points?
1.5 × 10³V is the potential difference between the two points where work done by external agent to move a point charge of 2 mc from the origin to a point 3 m away is 5 J.
What is potential difference?The quantity of current times the resistance equals the potential difference (also known as voltage), which is equal to that. When a charge travels between two locations in a circuit, a potential difference of one Volt is equivalent to one Joule of energy being used by that charge.
W = 5J, the amount of work required to move the point charge by the external agent.
q = 2 mC, is the point charge.
Description of the work is,
W = Vq
V=W/q
Replace the values listed,
V = 5J / 2mC
V = 5J / 2 × 10 ⁻³C
V = 2.5 × 10³ V
Consequently, the possible discrepancy between the points is 1.5 × 10³V
To learn more about potential difference, visit:
https://brainly.com/question/12198573
#SPJ4
an aluminum cube with side length of 10 cm is divided into two equal pieces so that a hemi-spherical recess with diameter of 8 cm can be bored out of each of the two pieces. if the density of aluminum is 2.7 grams per cubic cm, what is the mass of the remaining metal of the two parts of the cube, to the nearest gram? (density is mass divided by volume.)
The total mass of the remaining metal of the two parts of the cube is approximately 3966 g to the nearest gram.
What is mass?The amount of matter in an object is indicated by its mass. It is typically expressed in grams, kilograms, and tonnes when using the metric system. Mass and Weight are different from one another.
The cube has a volume of 10cm x 10cm x 10cm = 1000 cm^3.
The hemi-spherical recess has a radius of 4cm, so the volume of the recess is (2/3)π(4cm) ^3 = 268.08 cm^3.
The volume of the remaining metal of each piece of the cube is (1000 cm^3 - 268.08 cm^3) = 731.92 cm^3.
So, the mass of the remaining metal of each piece is (density of aluminum) x (volume of remaining metal) = 2.7 g/cm^3 x 731.92 cm^3 = 1983.024 g.
Therefore, the total mass of the remaining metal of the two parts of the cube is 1983.024 g x 2 = 3966.048 g, which is approximately 3966 g to the nearest gram.
To know more about mass, visit:
brainly.com/question/19694949
#SPJ4
