When a capacitor that runs at 1,000 volts or less is disconnected from an active circuit, the charge must be reduced within a reasonable amount of time to a safe level or less.
What will happen if a capacitor is completely drained?The safe level of charge for a capacitor that operates at 1,000 volts or less is typically considered to be below 50 volts.The appropriate time frame for draining the charge on a capacitor depends on the specific application and the safety regulations that apply to it.The National Electric Code (NEC) in US and other international standards have different regulations for safe handling of capacitors and the time frame for discharging the capacitors.It is important to consult the appropriate safety regulations and guidelines for the specific application in order to determine the correct time frame for draining the charge on a capacitor.It's also important to use the right tools and equipment to discharge the capacitors safely, such as using a discharge wand, bleeder resistors and etc.To summarize, when a capacitor that operates at 1,000 volts or less is removed from an energized circuit, the charge on the capacitor shall be drained to a safe level (generally less than 50 Volts) within an appropriate time frame, in compliance with the safety regulations.To learn more about capacitor refer:
brainly.com/question/27393410
#SPJ4
When testing the claim that p1 = p2, a test statistic of z = 2. 04 is obtained. Find the p-value obtained from this test statistic.
The upper test of 0.0414 is the p-value obtained from this test statistic.
P1P1 = P2P2
The above is the null hypothesis
The two-sided alternative hypothesis is:
P1P1 [tex]\neq[/tex] P2P2
"\=/" stands for "not equal".
Use the Z-Table or Z-Calculator to derive the p-value (probability value) for a Z-score of 2.04.
In the upper test,
2 × [probability z>2.04] = 2[0.0207] = 0.0414
This is the p-value for the test statistic.
The focus is on the alternative hypothesis.
So, final answer is that the upper test of 0.0414 is the p-value obtained from this test statistic.
Learn more about hypothesis
brainly.com/question/896413
#SPJ4
Two charged objects are held 1 meter apart from each other. Then they are moved to 4 meters apart. How are the electrostatic force and gravitational force between them affected by this move?.
The electrostatic force and gravitational force will be one-sixteenth.
Gravitational force: The force of attraction between any two bodies is
directly proportional to the product of their masses and is inversely proportional to the square of the distance between them.Electrostatic force: The force of attraction between any two charges is
directly proportional to the product of their masses and is inversely proportional to the square of the distance between them.i.e. both the forces are inversely proportional to distance between them.
So, GF = EF ∝ [tex]\frac{1}{r^{2} }[/tex]
where r = distance between them.
When distance between objects are 1m , Both the forces are inversely proportional to 1.
When distance between objects are 4m , Both the forces are inversely proportional to 16.
So, the New forces becomes 1/16th of the original one.
To know more about forces visit:
https://brainly.com/question/30135363
#SPJ4
the plates of a parallel-plate capacitor are connected to a battery. if the distance between the plates is halved, the energy of the capacitora. a. Increases by a factor of 4
b. Doubles
c. Remains the same
d. Is halved
e. Decreases by a factor of 4
A parallel-plate capacitor's energy is given as it is halved. in this case, Option C is correct.
Where are the capacitor battery's capacitance and emf?
a = U = 1 CUR
Capacitance is known to be equal to C and CRA. Capacitance = d = ac 2 Eu A = and the new capacitor's expat energy = U = clu2 = 2002 are calculated when the space between the plates is cut in half. 2 20 01 = 20. The energy of the capacitor doubles as a result.
Does the battery contain a capacitor?
A battery is an electronic device that transforms chemical energy into electrical energy to provide a static electrical charge for power, whereas a capacitor is an electronic component that stores electrostatic energy in an electric field.
To learn more about capacitor's energy here:
brainly.com/question/13615988
#SPJ4
How does edge computing reduce latency for end?.
By transferring compute tasks to local devices, such as smartphones and laptops, rather than the cloud, edge computing minimises latency for end users.
With edge computing, customers may leverage their devices as a reliable computational resource at scale in addition to increasing agility and cost-effectiveness. Here are some ways that edge computing has made it such that consumers experience less latency.
There are several brand-new difficulties facing organisations in the era of big data. One significant obstacle is latency. Companies must analyse data more quickly as they gather more of it and store it in their systems. They must thus keep more data nearby their users. You may act more quickly the closer the data is. Making data more accessible to people through computers is one way businesses may reduce latency.
Learn more about Latency here:
https://brainly.com/question/14264521
#SPJ4
His third law states that for every action (force) in nature there is an equal and opposite reaction. If object A exerts a force on object B, object B also exerts an equal and opposite force on object A
According to his third law, there is a equal and opposite response to every force (activity) in nature. If object A applies a force to object B, b will respond with an equal and opposing force.
Examples of the third law of Newton?Newton's Third Law illustration Everyday life is full of instances of Newton's third rule of motion. For instance, when you leap, the force from your legs pushing against the ground is balanced by the opposite reaction force from the earth, which lifts you into the air. When creating rockets and other projectiles, engineers use Newton's third law.
Describe Newton's third law. Why does that matter?The third law of movement by Newton states that equal but diametrically opposed energies always act in pairs. There is an opposite but equal reaction to every action, to put it another way. This means because when you push against a wall, the ceiling pushes back against you with an equal amount of force.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
Two 3. 0 g bullets are fired with speeds of 40. 0 m/s and 80. 0 m/s, respectively. What are their kinetic energies? which bullet has more kinetic energy? what is the ratio of their kinetic energies?.
For the first bullet, kinetic energy is 480 J and for the second bullet, kinetic energy is 1920 J.
What is kinetic energy?Kinetic energy is the energy possessed by an object or a particle due to its motion. It is the energy of motion and can take many forms, such as the energy associated with an airplane flying through the air, a ball rolling down a hill, a person running, or a car traveling on a highway. In general, kinetic energy is the energy an object has because of its movement.
The kinetic energies of the two bullets can be calculated using the equation KE = (1/2)mv2, where m is the mass of the object and v is the velocity of the object.
For the first bullet, KE = (1/2)(3.0 g)(40.0 m/s)2 = 480 J.
For the second bullet, KE = (1/2)(3.0 g)(80.0 m/s)2 = 1920 J.
The second bullet has more kinetic energy than the first bullet. The ratio of their kinetic energies is 4:1. This means that the second bullet has four times more kinetic energy than the first bullet.
To learn more about kinetic energy
https://brainly.com/question/25959744
#SPJ4
A red cart ma = 2kg and a blue cart ma = 2 kg are ELASTICALLY crahed into each other at the indicated velocitie and bounce. After the colliion which cart will have the SMALLEST peed
The objects in an elastic collision split apart after impact while maintaining all of their kinetic energy. Kinetic energy, often known as the energy of motion, is discussed in more detail elsewhere.
How do you find the velocity of a bounce?When the ball is not in contact with the ground, the formula h(t+t0)=v0t12gt2 determines the height at time t following the previous bounce at time t0. where v0 denotes the speed shortly before the bounce.
The mass of the red cart, m1, is equal to m1u1 + m2u2 = m1v1 + m2v2.
The blue cart has a mass of m2.
The red cart's starting speed is u1.
The blue cart's starting speed is u2.
The red cart's ultimate speed is v1.
The blue cart's ultimate speed is v2.
The final speed of each cart is determined by the formula: v1 = [m1u1 + m2u2 - m2v2] / m1
m1u1 + m2u2 - m1v1 = v2 / m2
As m1 = m2, our new equation is: v1 = u1 + u2 - v2.
v₂ = u₁ + u₂ - v₁
To learn more about collision refer to:
https://brainly.com/question/7221794
#SPJ4
PLEASE HELP RN
A projectile is shot horizontally off a cliff at a speed of 44 m/s. It hits the ground 2 seconds
later.
How high is the cliff, in meters?
Distance from the base to cliff does it land is 41.4m,
What is distance?Distance is a measurement of how far away two things or locations are, either numerically or occasionally qualitatively. Distance can refer to a physical length in physics or to an estimate based on other factors in common use.Distance is the sum of an object's movements, regardless of direction. Distance may be defined as the amount of space an item has covered, regardless of its beginning or finishing position.A span is any distance between two objects. These end points may be concrete, like the length of a rope between two trees, or they could be more ambiguous, like the interval between five and six o'clock in the morning.Given data :
Let’s review the 4 basic kinematic equations of motion for constant acceleration (suggest you commit these to memory):
s = ut + ½at^2 …. (1)
v^2 = u^2 + 2as …. (2)
v = u + at …. (3)
s = (u + v)t/2 …. (4)
where s is distance, u is initial velocity, v is final velocity, a is acceleration and t is time.
First, we find the time taken by the projectile to drop 84m. From equation (1):
84 = 0 + 0.5(9.81)(t^2) so t = √(84/4.905) = 4.14s
Next, we find the distance travelled in 4.14s at 10m/s, which is:
Distance = 4.14*10 = 41.4m
Completed question :
A projectile is thrown horizontally off of a 84 m high cliff at 10 m/s. How far away from the base of the cliff does it land?
Learn more about distance refer to :
https://brainly.com/question/26550516
#SPJ1
What is weight class 8?.
A block starts at rest and slides down a frictionless track. It leaves the track horizontally, flies through the air, and subsequently strikes the ground. The acceleration of gravity is 9.81 m/s 2. The mass of the block is 447g. The initial height of the track is 4m, while the final height of the track is 2.4m above the ground. What is the speed v of the ball when it leaves the track? Answer in units of m/s.
The speed v οf the ball when it leaves the track is 5.603 m/s.
What is acceleration?The term "acceleration" refers tο gradual changes in direction and speed. A change in the speed οr direction of an object or point moving forward is referred to as acceleration.
What does acceleratiοn mean and what does its SI unit mean?Acceleration is the term used in physics tο describe the rate at which an object's velocity changes οver time. The acceleration of a body is the result of all the reaction forces acting οn it, according to Newton's second law of motion. The unit of acceleration derived from Si is the metre per square secοnd (m/s²).
Cοnservation of energy is
[tex]\mathrm{mg(\Delta h) = \dfrac{1}{2} mv^2 }[/tex]
[tex]\mathrm{ v = \sqrt{2g(\Delta h)} }[/tex]
[tex]\mathrm{ v = \sqrt{2 \times 9.81(4 - 2.4)} }[/tex]
v = 5.603 m/s
Thus, The speed v οf the ball when it leaves the track is 5.603 m/s.
To learn mοre about acceleration, visit
brainly.com/question/12550364
#SPJ4
Complete question:
What's the difference between Newton's first law and inertia?.
Newton's first law, also known as the law of inertia, states that an object at rest will remain at rest, and an object in motion will continue in motion with a constant velocity unless acted upon by an unbalanced force. In other words, it states that an object will remain in a state of constant velocity unless acted upon by a net external force.
Inertia, on the other hand, is the property of an object that resists a change in its state of motion. It is the tendency of an object to maintain its current state of motion (i.e. at rest or in motion) unless acted upon by an external force. Inertia is a fundamental concept in physics and is closely related to Newton's first law.
So in summary, Newton's first law is a statement about the behaviour of an object in motion and the relationship between force and motion, while inertia is a property of an object that describes its resistance to a change in motion.
Learn more about Laws of Inertia here: https://brainly.com/question/18128368
#SPJ4
A ball i thrown horizontally from the roof of a building 55 m tall with a peed of 3. 8 m/. How far from the building will it land?
If a ball i thrown horizontally from the roof of a building 55 m tall with a speed of 3. 8 m/ so the ball will land 55 m away from the building.
What is speed?Speed is the rate at which something moves or occurs. It is usually measured in terms of distance over time. Speed can be expressed in many different forms, including miles per hour (mph), kilometers per hour (kph), meters per second (m/s) and even in terms of the speed of light. Speed is a measure of how quickly something moves in a specific direction.
The ball will land 55 m away from the building. This is because the horizontal velocity of the ball is 3.8 m/s, and the time it takes to travel 55 m is 55/3.8 = 14.47 seconds. Since the ball was thrown horizontally, it will travel a horizontal distance equal to the time it took multiplied by the velocity, which is 14.47 * 3.8 = 55 m.
To learn more about speed
https://brainly.com/question/13943409
how would you describe the motion of plates in a transform boundary?
As the plates separate from one another, the transform boundary is described. Assume that two crusts are present and that they exactly line up from east to west. A plate drifts north, away from another plate.
What is the transform plates motion?The transform fault, a third type of plate boundary, allows plates to slide past one another without creating or destroying crust. Rocks facing each other on two sides of the fault are typically of different type and age because they are cut and displaced by movement in the opposite direction.
Two plates collide at the transform plate boundary when they slide past one another horizontally. The San Andreas Fault, which causes a large number of earthquakes in California, is a well-known transform plate boundary.
To know more about transform boundary visit:
https://brainly.com/question/13311455
#SPJ4
What applications need low latency?.
There are several applications that require low latency, including: online gaming, virtual reality, video conferencing etc.
Online gaming: Low latency is important for online gaming because it ensures that the player's actions are quickly and accurately reflected on the other players' screens.
Financial trading: High-frequency trading requires low latency to ensure that trades are executed quickly and accurately.
Virtual reality and augmented reality: Low latency is important for these technologies to ensure that the virtual world is in sync with the user's movements, providing a more realistic experience.
Video conferencing: Low latency is important for video conferencing to ensure that the audio and video are in sync and that there is no lag in the conversation.
Autonomous vehicles: Low latency is essential for self-driving cars to ensure that they can respond quickly and safely to their environment.
Streaming services: Low latency is essential for streaming services to ensure that users receive a smooth and uninterrupted experience.
These are just a few examples of applications that require low latency. In general, any application that involves real-time communication or control will require low latency to function properly.
To know more about low latency click here:
https://brainly.com/question/29781666#
#SPJ4
PLEASE HELP!!!! A 1500 kg high performance racecar can exert an average force of 15,000 Newtons to accelerate from o to 100 mph (45 m/s).
How much time will it take to reach this speed?
It will take 5x105 seconds to get to this pace.
What is speed and what is its unit in physics?Speed refers to the rate at which a length varies over time. It has a time-distance dimension. The outcome is the High silica element of speed, which combines the fundamental time units and the fundamental measure of length. As a result, the SI unit for velocity is the metre per second, or m per s.
What does velocity vs. acceleration mean?Velocity is the term for the rate of movement. The measurement of a velocity shift called acceleration. Given that it includes both magnitude and direction, it is a vector quantity. Due to the fact that it determines how quickly velocity changes, acceleration is just a vector quantity.
To know more about Speed visit:
https://brainly.com/question/28224010
#SPJ1
Who discovered cosmic microwave background radiation?
Cosmic microwave background radiation (CMB) was discovered by American physicists Arno Penzias and Robert Wilson in 1964.
What is radiation and who discovered it ?The discovery was made while they were working at Bell Labs in New Jersey.Penzias and Wilson were using a horn-shaped antenna to study radio waves coming from space.They noticed a faint, constant noise coming from all directions, which they couldn't explain.After eliminating all possible sources of interference, they realized that the noise was coming from the universe itself.They published their findings in the journal "Astrophysical Journal" in 1965, and their discovery was soon recognized as the CMB.They were awarded the Nobel Prize in Physics in 1978 for their discovery of the CMB, which is considered one of the most important pieces of evidence for the Big Bang theory.The discovery of CMB provided strong evidence in favor of the big bang theory, Penzias and Wilson's discovery was a direct confirmation of the big bang theory.To lean more about radiation refer:
brainly.com/question/893656
#SPJ4
What process is used to move molecules across a cell membrane to space where the concentration of the molecules is higher?.
Diffusion is utilised to move molecules across cell membranes and into regions with higher concentrations. Every cell has a cell membrane, which is only partially permeable.
Molecules can enter and depart cells by active transport and diffusion, respectively. Water can move into or out of cells via osmosis. When chemicals pass via certain transport proteins and diffuse across the cell membrane, this happens. In probability theory and statistics, a class of continuous-time Markov processes known as diffusion processes is one that almost surely has continuous sample routes. Diffusion is utilised to move molecules across cell membranes and into regions with higher concentrations. Every cell has a cell membrane, which is only partially permeable. Brownian motion, Ornstein-Uhlenbeck processes, and reflected Brownian motion are a few examples of diffusion processes.
Learn more about molecules here
https://brainly.com/question/19922822
#SPJ4
What is Newton's 3 law example?.
One example of Newton's third law is when a person pushes against a wall.
The person exerts a force on the wall, and the wall exerts an equal and opposite force back on the person. Another example is when a baseball is hit with a bat.
The bat exerts a force on the baseball, causing it to move forward, and the baseball exerts an equal and opposite force back on the bat, causing it to move in the opposite direction.
The same applies to the action of a rocket taking off from the ground. The rocket exerts a force on the exhaust gases, pushing them out the back of the rocket and causing the rocket to move forward, and the exhaust gases exert an equal and opposite force back on the rocket, propelling it upward.
To learn more about Newton's 3rd law at
https://brainly.com/question/14967902?referrer=searchResults
#SPJ4
How is latency reduced?.
Using the CDN, the latency can be reduced as much as possible.
Using CDNs, the distance between the client making the request and the server responding to that request plays an important role. A CDN (Content Delivery Network) allows you to bring your resources closer to your users by caching them in multiple locations around the world. Network administrators have many tools to choose from for this, including Ping, Traceroute, and My Traceroute (MTR) which will cause the latency to reduce. Another thing this movie has in common with the quest for zero-latency monitoring is that both are myths. "Zero Latency" is just a marketing slogan someone came up with to get you to buy an audio interface.
Learn more about the latency in
https://brainly.com/question/29497697
#SPJ4
Why is 1 kg equal to 9. 8 Newtons?.
1 kg-wt is equal to 9.8 Newton. It is vector quantity which has magnitude as well as direction.
The weight of an object is nothing but the gravitational force exerted by the earth on the object. Since it is a force and it is defined as the product of mass and acceleration due to gravity. And we know that the value of acceleration due to gravity is 9.8 m/s². Although it slightly changes place to place, but we take its average value 9.8 m/s².
Force = Mass × Acceleration
Force = 1 kg × 9.81 m/s²
1 kg-wt = 9.81 N
The SI unit of force is Newton.
To know more about vector quantity, here
https://brainly.com/question/8473644
#SPJ4
What is magnitude of 2i 3j 4k?.
The magnitude of 2i 3j 4k is 5.38 unit.
What is magnitude?Magnitude is simply "distance or quantity" in physics. This representation can be used to show the motion of an item in absolute or relative terms, as well as its size change. It's a descriptive term for something's size or scope. Magnitude is a term used to describe length or size in physics.
To find the magnitude of a vector in three dimensional space, we can use this following formula:
∥a∥ = √ (x² + y² + z²)
In this case, we are given that:
X = 2, Y = 3, and Z = 4
Thus, the magnitude of the vector is:
∥a∥ = √ (2² + 3² + 4²)
∥a∥ = √29
∥a∥ = 5.38
To learn more about magnitude, click here:
https://brainly.com/question/30016405
#SPJ4
What is the difference between dimension and dimension formula of a physical quantity?.
Dimension of a physical quantity are the power to which the basic dimension are raised to quantify that quantity. On the other hand, dimension formula is how and which basic quantities are included to represent the magnitude of the quantity.
Lets say we have a physical quantity "work". As the unit of work is joule which is equal to the kg-m²/s². This is the dimension of the work. But its dimension formula will be [ML²T⁻²].
As the formula of work is F × d × Sinθ.
[MLT⁻²] is the dimension formula of force
[L] is the dimension of displacement
So, work's dimension formula will be [MLT⁻²] ×[L] = [ML²T⁻²]
To know more about physical quantity, here
https://brainly.com/question/26171158
#SPJ4
A tudent pull a wagon 5 meter with a force of 19 Newton at an angle of 25 degree for 7 econd. What i the power output by the tudent?
The student is producing an output power of 6.43 Watts over the 7 second duration.
What is force?Force is an influence that causes an object to change its motion, direction, shape, or other physical qualities. Forces can be caused by physical contact, or they can be created by fields like gravity and magnetism. Forces can also be internal, such as the forces of friction, tension, and compression.
The power output by the student can be calculated using the equation Power = Force x Distance/Time. In this case, the power output is equal to 19 x 5 / 7 = 6.43 Watts. This means that the student is producing an output power of 6.43 Watts over the 7 second duration.
To know more about force click-
https://brainly.com/question/12785175
#SPJ4
If you add 20g of ice at 0 degree celciu to 180g of water at 20 degree celciu, what i the final temperature of the water a all of the ice melt?
The combined water and melted ice temperature is 31.15°C.
We can use the following formula:
q = m c T is used to calculate the final temperature of the water and melted ice, where:
q = added or lost heat
m = the substance's mass
c = the substance's specific heat capacity
T = temperature change
Finding the heat that the ice has taken away:
(20g) x (2.1 J/g°C) x (0 - (-20))°C = q
q = 8400 J
Identifying the heat gained by water:
(180g) x (4.18 J/g°C) x (T) = q
Taking the heat lost by ice and converting it to the heat gained by water
(180g) x (4.18 J/g°C) x (T) = 8400 J
Trying to find T
T = 8400 J/(180g x 4.18 J/g°C).
ΔT = (8400/756)°C = 11.15°C
We get the final temperature by adding the initial temperature of the water to the temperature change.
T(f) = 20°C + 11.15°C = 31.15°C
As a result, the combined temperature of the water and melted ice is 31.15°C.
Learn more about specific heat capacity at : https://brainly.com/question/29766819
#SPJ4
Determine the relationship between the melting point of an impure substance to that of a pure substance. A.The melting point of the impure substance compared to the pure substance cannot be determined. B. The melting point of the impure substance would be the same as that of the pure substance. C. The melting point of the impure substance would be higher than that of the pure substance. D.The melting point of the impure substance would be lower than that of the pure substance.
The melting point of impure substance is slightly lower than the melting point of the pure substance.
Melting point of a substance is that temperature at which substance begins to melt. In other words, the temperature at which the distance between the molecules of the substance begins to increase. When a substance is a mixer of two or more substance, then its called impure substance. Different type of substances have different coefficient of thermal expansions and different melting point. So they begin to melt at slightly lower temperature than the melting point of one of the substance, This is due to the uneven expansion of the substance at the same temperature.
To know more about melting point, here
https://brainly.com/question/29578567
#SPJ4
Can someone give a guide to the symbols, please?
Answer: The answer is (D) [tex]v_{f} = 0[/tex]
Explanation: Here is a guide to the symbols that are presented in the options:
In option (A), it is Δx = 0, it is read as "del of x equals zero." Δx represents the change in the position of a particular object.
In option (B), it is [tex]v_{i}[/tex] = 0, here [tex]v[/tex] denotes the velocity of the object, and 'i' denotes the initial. So, [tex]v_{i}[/tex] denotes the initial velocity of the object.
In option (C), it is a = a, and 'a' denotes the acceleration of the object.
In option (B), it is [tex]v_{f}[/tex] = 0, here [tex]v[/tex] denotes the velocity of the object, and 'f' denotes the final. So, [tex]v_{f}[/tex] denotes the final velocity of the object.
The question asked about the meaning of "comes to a stop." When an object comes to a stop it means it has no or 0 velocity, which means the final velocity becomes 0. hence, option (D) is the correct answer.
To learn more about velocity and acceleration:
https://brainly.com/question/13639113
https://brainly.com/question/28743430
The speed of light is around 6.706×108 miles per hour. what is the speed of light in units of miles per minute?
miles per minute, or the speed at which light Light moves at a fixed, constant pace of 186,000 miles per second.
How does the amount of significant digits in your answers to the calculations in the last quizlet differ depending on conversion factors?The conversion factor carries no uncertainty, hence the significant number of numbers in our response is unaffected. The amount of significant figures will, however, affect our calculation when using actual measurements.
A metric conversion table what is it?A Metric Conversion Chart The metric transformation chart is a table that shows all the basic units and how they are converted. The primary bases for these basic metric units are length, volume, space, weight, temperature, and area.
To know more about speed visit :
https://brainly.com/question/28224010
#SPJ4
Answer: 1.118x10 7
Explanation: To find the speed of light in units of miles per minute, we must use the fact that 60min=1hr.
6.706×108mihr×1hr60min=1.118×107mimin
Therefore, we find that the speed of light is approximately 1.118×107 miles per minute.
Name all the alphabet in Scientific Method Review
The names of the alphabets in the Scientific Method Review include:
H - Hypothesize O - Operationalize M - Measure E - Evaluate R - Replicate/revise/reportWhat is HOMER ?HOMER is an acronym that is meant to encompass the various steps that one should take when they are engaged in Scientific Method Review. This first is to come up with a hypothesis.
The second is to operationalize this hypothesis to test it for viability. Then there is a need to measure this research and then eveluate results. Finally, one should replicate the test, revise the results, and then report.
Find out more on the Scientific Method Review at https://brainly.com/question/14329481
#SPJ1
acid rain is the result of pollutants being released into the
Acid rain is the result of pollutants being released into the air
What is acid rain ?Acid rain is defined as rain or any other type of precipitation that is unusually acidic, which means it contains a lot of hydrogen ions. Acid rain has a pH level that is lower than this and typically ranges from 4-5. Most water, including drinking water, has a neutral pH that exists between 6.5 and 8.5.
When gases like sulphur dioxide and nitrogen oxides are released into the atmosphere, a chemical reaction takes place that eventually results in acid rain. These substances have the capacity to ascend to extremely high altitudes in the atmosphere, where they combine and interact with oxygen, water, and other chemicals to create acid rain, a type of ozone-depleting haze.
Learn more about Acid rain here:
https://brainly.com/question/22143130
#SPJ4
What is the relationship between speed and kinetic energy for kids?.
Answer:
they are kinda the same.
