when a falling meteoroid is at a distance above the earth's surface of 3.40 times the earth's radius, what is its acceleration due to the earth's gravitation? m/s2 towards earth

The net electric field at point P is zero because the electric fields due to the two charges cancel each other out.

What is Magnitude?

Magnitude is a term used in physics to refer to the size or amount of a physical quantity or property. In other words, it is a measure of the numerical value or strength of a physical quantity, regardless of its direction.

Since the charges are at the vertices of an equilateral triangle, the electric fields due to the two charges at point P will have equal magnitudes and opposite directions. This is because the distance between each charge and point P is the same, and the angles between the lines joining the charges to point P are also the same.

Therefore, the electric fields due to the two charges will cancel out each other, resulting in a net electric field of zero at point P.

To know more about Magnitude visit;

https://brainly.com/question/30337362

#SPJ4

To cause the particle to move to the right at 34 m/s, a net work of 8.77 J must be done on the particle.
The net work done on an object is equal to its change in kinetic energy. In this case, the initial kinetic energy of the particle is:

K_i = 1/2 * m * v_i^2
   = 1/2 * 0.015 kg * (-22 m/s)^2
   = 6.27 J

where m is the mass of the particle, and v_i is its initial velocity to the left.

The final kinetic energy of the particle is:

K_f = 1/2 * m * v_f^2
   = 1/2 * 0.015 kg * (34 m/s)^2
   = 8.19 J

where v_f is the final velocity of the particle to the right.

The change in kinetic energy of the particle is:

ΔK = K_f - K_i
   = 8.19 J - 6.27 J
   = 1.92 J

To cause this change in kinetic energy, a net work of 1.92 J must be done on the particle. However, since the particle is moving in the opposite direction, the net work done on it must be negative, which means that work must be done against the particle's initial motion. Thus, the net work done on the particle is:

W_net = -ΔK
     = -1.92 J
     = -1.92 N*m

where N*m is the unit of work, also known as the joule (J). However, since the particle is moving in the opposite direction, we can also express the net work done on it in terms of the distance over which the force is applied, which is:

W_net = F_net * d
     = -m * a * d
     = -0.015 kg * (-12 m/s^2) * d
     = 0.18 d J

where F_net is the net force applied on the particle, a is its acceleration, and d is the distance over which the force is applied. Setting this expression equal to -1.92 J and solving for d, we get:

0.18 d J = -1.92 J
d = -1.92 J / 0.18 J/m
d = -10.67 m

However, since distance is a scalar quantity, we can take the absolute value of d, which gives us:

d = 10.67 m

Thus, a net work of 8.77 J must be done on the particle to cause it to move to the right at 34 m/s.

learn more about kinetic energy

https://brainly.com/question/8101588

#SPJ11

The I kg cart has a greater kinetic energy at the end of the push. So, the correct option is A).

To determine which cart has a greater kinetic energy at the end of the push, we need to use the formula for kinetic energy, which is

Kinetic energy = 1/2 * mass * velocity²

Calculate the velocity of each cart

Cart 1: Final momentum = mass * velocity, so velocity = final momentum / mass = 10 / 1 = 10 m/s

Cart 2: Final momentum = mass * velocity, so velocity = final momentum / mass = 10 / 2 = 5 m/s

Calculate the kinetic energy of each cart using the formula

Cart 1: KE = 1/2 * 1 kg * (10 m/s)² = 50 J

Cart 2: KE = 1/2 * 2 kg * (5 m/s)² = 25 J

Therefore, the 1 kg cart has a greater kinetic energy at the end of the push. So, the correct answer is A).

To know more about Kinetic Energy:

https://brainly.com/question/26472013

#SPJ4

--The given question is incomplete, the complete question is given

"Cart Mass (kg)    1,       2

Applied Force (N)  5,      5

Time Force is Exerted (s)   2,       2

Final Momentum (m/s)   10,         10

Final Kinetic Energy (J)  50

Two frictionless lab carts start from rest and are pushed along a level surface by a constant force Students measure the magnitude and duration of the force on each cart, as shown in the partially completed data table above, and calculate final kinetic energy and momentum. Which cart has a greater kinetic energy at the end of the push?

a. The I kg cart

b. The 2 kg cart

c. Both carts have the same amount of kinetic energy

d. The relationship cannot be determined without knowing the distance each cart moved as the force was being applied."--

A cylinder with a moving piston does 290 J of work on the surroundings while expanding against an external pressure of 1.20 atm. The final volume of the cylinder is 108 mL.

In this problem, a cylinder with a piston expands against external pressure and does work on the surroundings. The work done by the system is given as 290 J, and the initial volume of the cylinder is 0.350 L, with an external pressure of 1.20 atm. We need to determine the final volume of the cylinder.

To solve this problem, we can use the equation:

[tex]W = -Pext \Delta V[/tex]

where W is the work done by the system, Pext is the external pressure, and ΔV is the change in volume.

Solving for ΔV, we get:

[tex]\Delta V = -W/Pext[/tex]

Substituting the given values, we get:

[tex]\Delta V = -(290 J)/(1.20 atm)[/tex]

[tex]\Delta V = -241.67 mL[/tex]

Since the volume increases, the final volume can be found by adding the change in volume to the initial volume:

[tex]Vf = Vi + \Delta V[/tex]

Vf = 0.350 L + (-241.67 mL)

Vf = 0.108 L or 108 mL

Therefore, the final volume of the cylinder is 0.108 L or 108 mL.

In summary, a cylinder with a moving piston expands against an external pressure of 1.20 atm, doing 290 J of work on the surroundings. We can use the equation [tex]W = -Pext \Delta V[/tex] to determine the change in volume, and then add it to the initial volume to find the final volume. The final volume of the cylinder is 0.108 L or 108 mL.

To know more about pressure refer here:

https://brainly.com/question/28907914#

#SPJ11

The equivalent capacitance of this arrangement is 3C/2. This is because when capacitors are connected in parallel, their total capacitance is equal to the sum of their individual capacitive values.

Capacitance is a physical property of an electrical component that determines the amount of electric charge it can store. It is the ratio of the electric charge stored on the component to the electric potential difference between its plates. It is measured in Farads and is inversely proportional to the size of the electric field between the plates. Capacitance is an important factor in the design of electric circuits, as it can affect the amount of current flowing through the circuit. Capacitors are used to store energy, filter signals, and reduce power losses in electrical circuits.

Therefore, the two capacitors in parallel are equivalent to a single capacitor with capacitance 2C. When the third capacitor is connected in series to this combination, the total equivalent capacitance is equal to the sum of the individual capacitive values, which is 3C/2.

To learn more about capacitance
https://brainly.com/question/27753307
#SPJ4

If mass were continually added to a 3-solar mass neutron star, the star would eventually become a black hole.

When the mass is continually added to a 3-solar mass neutron star, it increases the gravitational pull within the star. As the mass increases, the star's radius may initially expand slightly, but eventually, the gravitational pull will become so strong that the neutrons can no longer withstand it. Once the star exceeds the Tolman-Oppenheimer-Volkoff (TOV) limit, which is approximately 2-3 solar masses, it can no longer support itself against its own gravity.

At this point, the neutron star will collapse, resulting in the formation of a black hole. This process does not involve a nova, as that typically occurs in a different type of stellar evolution. Therefore, the correct option is that the star would eventually become a black hole.

To know more about the neutron star visit:

https://brainly.com/question/31526957

#SPJ11

The magnetic field around a current-carrying wire is an important concept in physics.

According to the right-hand rule, the magnetic field is oriented in a circular pattern around the wire, with the direction of the field determined by the direction of the current flow. The strength of the magnetic field is directly proportional to the current in the wire and the distance from the wire. In other words, the closer the point is to the wire, the stronger the magnetic field will be. This principle is used in various applications, including motors, generators, and transformers, where the magnetic field is used to convert electrical energy into mechanical energy or vice versa. Understanding the magnetic field around a current-carrying wire is crucial for anyone working in the field of electricity and magnetism.

To know more about magnetic field visit:

https://brainly.com/question/14848188

#SPJ11

The earlobes of a chicken can predict the color of eggs it will lay. Chickens with white earlobes will typically lay white eggs, while chickens with red earlobes will lay brown eggs.

The color of a chicken's earlobes can indicate the color of the eggs it will lay. Chickens with white earlobes will typically lay white eggs, while chickens with red earlobes will lay brown eggs. This is because the same genes that control the color of the earlobes also affect the color of the eggs.

However, there are exceptions to this rule, and not all chickens follow this pattern. The breed of the chicken can also influence the color of the eggs it lays, so it is not always accurate to rely solely on the color of the earlobes to predict egg color. It is important to note that earlobe color has no impact on the nutritional content or taste of the eggs.

Learn more about genes here:

https://brainly.com/question/8832859

#SPJ11

When parking on a downhill street with the curb to the right, it is essential to position your wheels in a particular way to avoid any accidents or damage to your vehicle.

The correct position for your wheels is to turn them towards the curb. This means that the front wheels of your car should be turned to the right, towards the curb, and the rear wheels should be straight.

Turning the front wheels towards the curb will create an uphill buffer, which will prevent the car from rolling downhill if the brakes fail. This is especially important if you are parking on a steep slope. Additionally, turning the wheels towards the curb will also ensure that your car is parked closer to the curb, leaving enough space for other vehicles to pass.

It is essential to ensure that your wheels are in the correct position when parking on a downhill street to avoid any potential accidents. Remember to always engage the handbrake and put the car in park or first gear to ensure that it does not move while parked.

To know more about parking click here:

https://brainly.com/question/15200023

#SPJ11

Two wires, a and b, have the same initial length, but the radius of a is 4 times that of b, and the young's modulus of a is one-third that of b. if the same weight is attached to both wires, then the ratio of the extensions of the wires is 1:48.

The extension of a wire under load is directly proportional to its length, cross-sectional area, and inversely proportional to its Young's modulus.

As the weight attached to both wires is the same, the force applied will also be the same. As wire A has four times the radius of wire B, its cross-sectional area is 16 times larger than that of wire B.

As the Young's modulus of wire A is one-third that of wire B, it will stretch three times as much for the same force applied. Therefore, the extension ratio of wire A to wire B will be (1/4) x (1/16) x (1/3) = 1/48.

Hence, the extension ratio of wire A to wire B is 1:48.

Learn more about  Young's modulus here:

https://brainly.com/question/29628548

#SPJ11

The ratio of the effective cross-sectional area in the spread-eagle position to that in the nosedive position is 0.078.

Let v₁ be the terminal speed of the skydiver in the spread-eagle position, v₂ be the terminal speed in the nosedive position, A₁ be the effective cross-sectional area in the spread-eagle position, and A₂ be the effective cross-sectional area in the nosedive position. The drag force on the skydiver is given by:

F = (1/2) * C * ρ * A * v²

where ρ is the density of air.

Since the drag coefficient C is constant, we can write:

F₁ / F₂ = (A₁ * v₁²)/(A₂* v₂²)

At terminal velocity, the gravitational force on the skydiver is balanced by the drag force, so:

(m * g) = (1/2) * C * ρ * A * v²

where m is the mass of the skydiver, g is the acceleration due to gravity, and v is the terminal speed.

Substituting this expression for F into the equation above and canceling out the common factors, we get:

(v₁²/v₂²) = (A₁/A₂)

Substituting the given values, we get:

(143²/335²) = (A₁/A₂)

Simplifying this expression, we get:

A₁ /A₂ = 0.078

Therefore, the ratio of the effective cross-sectional area in the spread-eagle position to that in the nosedive position is 0.078.

Learn more about “ cross-sectional area “ visit here;

https://brainly.com/question/20532494

#SPJ4

You should hold the magnifying glass approximately 5.48 cm away from the postage stamp to get a magnification of +2.

To determine the distance you should hold the magnifying glass from the postage stamp, we can use the lens formula and magnification formula. The given terms are:

Focal length (f) = 15 cm
Magnification (m) = +2

The lens formula is 1/f = 1/u + 1/v, where u is the object distance and v is the image distance. The magnification formula is m = -v/u.

First, we need to find the image distance (v). From the magnification formula, we have:

2 = -v/u => v = -2u

Now substitute this into the lens formula:

1/15 = 1/u + 1/(-2u)

To find u, solve this equation:

1/15 = (3u - 2u) / (2u^2) => u^2 = 30

u = sqrt(30) ≈ 5.48 cm

So you should hold the magnifying glass approximately 5.48 cm away from the postage stamp to get a magnification of +2.

To learn more about distance, refer below:

https://brainly.com/question/15172156

#SPJ11

This statement is generally true. When an atom absorbs a photon, it is usually because the photon has the exact amount of energy needed to move an electron from a lower energy level to a higher energy level. When the electron moves to an upper orbital, the atom gains energy. This is known as an "excited state".

On the other hand, when an atom emits a photon, it is usually because an electron moves from a higher energy level to a lower energy level. When the electron moves to a lower orbital, the atom loses energy. This is known as a "relaxed state".

However, it should be noted that in some cases, an atom can emit a photon even when an electron moves to a higher energy level. This occurs when the electron moves to a higher energy level but then quickly falls back down to its original level, releasing a photon in the process. This is known as "fluorescence" and is a common process in many materials.

Learn more about electron

https://brainly.com/question/12001116

#SPJ4

The effective internal resistance of the hair dryer can be calculated using Ohm's law, which states that resistance equals voltage divided by current. To find the current, we can use the power equation, which states that power equals voltage times current. So:

Power = Voltage × Current

1200 W = 120 V × Current

Current = 1200 W / 120 V

Current = 10 A

Now we can find the effective internal resistance:

Resistance = Voltage / Current

Resistance = 120 V / 10 A

Resistance = 12 ohms

Therefore, the answer is C) 12 ohms.

TO KNOW MORE ABOUT The effective internal resistance CLICK THIS LINK -

brainly.com/question/13105200

#SPJ11

The work done by an ideal gas undergoing an isothermal expansion at STP with a change in entropy of 3.7 J/K is 0 J. (Answer: A)

When an ideal gas undergoes an isothermal expansion, its temperature remains constant. This means that the gas follows the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature. Since the temperature is constant, the product of P and V must also be constant. During the expansion, the volume of the gas increases, which means the pressure decreases. In order for the expansion to be isothermal, the gas must absorb heat from its surroundings to maintain a constant temperature. The amount of work done by the gas during this expansion is equal to the heat absorbed by the surroundings. Using the relationship between entropy and heat, we can calculate the work done by the gas as follows:

ΔS = Q/T = W/T

Where ΔS is the change in entropy, Q is the heat absorbed by the gas, T is the temperature, and W is the work done by the gas. Solving for W, we get W = ΔS × T = 3.7 J/K × 273 K = 1010.1 J.

Learn more about isothermal expansion here:

https://brainly.com/question/4674503

#SPJ11

A stone is shot straight upward with a speed of 20 m/sec from a tower 200 m high. The speed with which it strikes the ground is approximately 176.2 m/s.

To solve this problem, we can use the kinematic equation

[tex]v^{2}[/tex] = [tex]u^{2}[/tex] + 2as

Where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (approximately 9.81 m/[tex]s^{2}[/tex]), and s is the distance fallen.

At the top of its trajectory, the stone's velocity is 0, so we can use this equation to find the time it takes to reach that point

0 = [tex](20m/s)^{2}[/tex] - 2(9.81 m/[tex]s^{2}[/tex])(200 m)

t = 20 seconds

Using this time, we can find the final velocity of the stone when it hits the ground

v = 20 m/s - (9.81 m/[tex]s^{2}[/tex])(20 s)

v = -176.2 m/s

The negative sign indicates that the stone is moving downward. Therefore, the speed with which it strikes the ground is approximately 176.2 m/s.

To know more about speed here

https://brainly.com/question/13014666

#SPJ4

The sandwich and the silver dollar will pass each other at a height of 10m above the ground.

We'll consider the sandwich's trajectory and the silver dollar's fall to determine their passing position.

1. Firstly, let's analyze the sandwich's motion. Since it's thrown just hard enough to reach your friend, it will have an initial vertical velocity (V0) and cover a distance of 10 meters in its ascent. We can use the equation H = V0t - (1/2)gt^2, where H is the height, t is the time taken, and g is the acceleration due to gravity (9.81 m/s^2).

2. For the silver dollar, it's dropped from rest, meaning its initial velocity is 0. We can apply the same equation to its motion: H = (1/2)gt^2.

3. The sandwich and the silver dollar will pass each other at the same time (t) and height (H). Therefore, we can equate the two equations:

V0t - (1/2)gt^2 = (1/2)gt^2.

4. This simplifies to V0t = gt^2, and we can solve for t: t = V0/g.

5. Substitute t back into the equation for the silver dollar's motion: H = (1/2)g(V0/g)^2 = (1/2)(V0^2/g).

6. Since we don't have the numerical value of V0, we cannot find the exact height (H). However, we've established the position where the dollar and sandwich pass each other in terms of V0 and g. Their passing height will be H = (1/2)(V0^2/g) above the ground.

For more about height:

https://brainly.com/question/10726356

#SPJ11

The result of a mirror image of a sound signal combining with the sound itself is called phase cancellation or interference.

When two sound waves with the same frequency and amplitude combine, they can either reinforce or cancel each other out depending on their phase relationship. When the mirror image of a sound wave is combined with the original sound wave, the resulting waveforms are out of phase, and they interfere with each other causing certain frequencies to cancel out or become quieter. This phenomenon is more noticeable in certain frequencies and can result in a less detailed answer depending on the specific signals being combined.

When the mirror image (inverted waveform) of a sound signal combines with the original sound, the positive and negative amplitudes of the waves can cancel each other out or reduce the overall amplitude, resulting in a quieter or even silent sound. This phenomenon is known as destructive interference or phase cancellation.

To know more about interference, visit:

https://brainly.com/question/16098226

#SPJ11

According to the given question of weber, 1 weber is the same as: 1 T/m2.

Weber is a sociological term, referring to the concept developed by German sociologist Max Weber. The concept is concerned with the way in which social action is structured, and how this structure affects our understanding of the world. Weber argued that social action is best understood as a means of communication between individuals, rather than simply as an act of compliance or obedience. In this way, Weber's concept of social action has been influential in the development of various sociological theories, such as those concerning the nature of power and authority, the structure of social hierarchies, and the impact of social norms on individual behaviour.

The weber (Wb) is the SI unit for magnetic flux. It is equal to one tesla-meter squared (T·m2). This means that one weber is equal to one tesla per meter squared (T/m2).

So, the correct answer is E.

To learn more about weber

https://brainly.com/question/29221352

#SPJ4

The federal agency that helps foreign governments with international conservation efforts is the United States Agency for International Development (USAID).

This agency is responsible for promoting sustainable development and environmental conservation in countries around the world. In a direct answer to your question, it is USAID that assists foreign governments with their conservation efforts.

USAID provides technical assistance, training, and financial resources to foreign governments to help them develop and implement conservation programs that are effective and sustainable. These efforts are aimed at protecting endangered species, preserving natural habitats, and promoting sustainable development practices that benefit both people and the environment.

To know more about conservation, visit:

https://brainly.com/question/29220242

#SPJ11

If the mass of both objects was tripled, and if the distance between the objects was doubled, then 36 units would be the new force of attraction between the two objects

What is the force of attraction law?

According to the law of gravitational attraction, the square root of the distance between two bodies is inversely proportional to their square product of masses.

Any kind of force, even one that doesn't require the objects to be touching or close to one another in order to work, is considered an attraction force. The gravitational force is the primary factor in attraction.

F ⇒Gm1m2/r2

If the mass of both objects was tripled, and if the distance between the objects was doubled,

F2 ⇒ 9Gm1m2/4r2

F2 ⇒ 9F/4

F2 ⇒ 9*16/4

F2 ⇒ 36

To learn more about gravitational force use:

https://brainly.com/question/29276623

#SPJ4

The coils behind the refrigerator discharge 330 J of heat into the kitchen each cycle (C).

According to the Carnot cycle, the amount of heat removed from the interior of the refrigerator is equal to the amount of work done by the compressor plus the amount of heat discharged into the kitchen. Therefore, the amount of heat discharged into the kitchen can be calculated as follows:

Heat discharged = work done by the compressor + heat removed from the interior

Heat discharged = 480 J + 150 J

Heat discharged = 630 J

However, not all of the heat removed from the interior of the refrigerator is discharged into the kitchen. Some of it is used to cool the coils behind the refrigerator. Since this is an ideal Carnot refrigerator, the amount of heat discharged is proportional to the temperature difference between the coils and the kitchen. If we assume that the temperature of the coils is the same as the temperature inside the refrigerator, then the ratio of the heat discharged to the total heat removed is equal to the ratio of the temperature difference between the coils and the kitchen to the temperature inside the refrigerator. This gives:

Heat discharged/Total heat removed = (T_inside - T_kitchen)/T_inside

Heat discharged/150 J = (480 J/150 J)

Heat discharged = 330 J

Therefore, the coils behind the refrigerator discharge 330 J of heat into the kitchen each cycle.

To learn more about temperature, click here: https://brainly.com/question/31655489

#SPJ11

Based on the given values of n, l, and ml, the only unknown quantum number is ms. According to the rules of quantum numbers, ms cannot be negative, which means it can only have values of +1/2 or -1/2. Therefore, both values (+1/2 and -1/2) are valid for ms, and there is no quantum number that has a value that is not valid in this case.
For n=4, l=1, ml=2, and ms=12, the quantum number that has a value that is not valid is ml.

According to the rules:
- l must be in the range of 0 to (n-1), which is 0 to 3 for n=4. So, l=1 is valid.
- ml must be in the range of -l to +l, which is -1 to +1 for l=1. Therefore, ml=2 is not valid.
- ms can have values of +1/2 or -1/2, so ms=12 is not valid as well.

Therefore, both values (+1/2 and -1/2) are valid for ms, and there is no quantum number that has a value that is not valid in this case.
To know more about quantum number:

https://brainly.com/question/2193783

#SPJ11

If none of the 44 dolphins encountered in the second sampling had been photographed before, then we can use the Lincoln-Petersen index equation to estimate the population size (n) as follows:

n = (N × n2) / n1

where N is the total number of dolphins marked in the first sampling (assumed to be known), n1 is the number of dolphins encountered in the first sampling, and n2 is the number of dolphins encountered in the second sampling that were not marked before.

Since none of the 44 dolphins encountered in the second sampling had been photographed before, we can assume that n2 = 44. However, without knowing the value of n1, we cannot solve the equation for n.

If we assume that the proportion of marked dolphins in the first sampling (N/n1) is representative of the proportion of marked dolphins in the entire population, then we can estimate the population size as follows:

n = N × (n2/n1)

For example, if N = 100 and n1 = 10, then we would estimate the population size as:

n = 100 × (44/10) = 440

However, this assumes that our initial marking effort was representative of the entire population and that there were no changes in the population size or structure between the two samplings.

In general, if we encounter a large number of unmarked individuals in a subsequent sampling, it may suggest that the population size is larger than our initial estimate based on the marking effort. However, we would need to consider other factors such as the size and spatial distribution of the population, the marking and recapture methods used, and the assumptions underlying the Lincoln-Petersen index.
In this case, if none of the 44 dolphins encountered in the second sampling had been photographed before, it would suggest that there are more dolphins in the population than initially estimated. However, you would not be able to precisely solve the equation for n (the total population size) based on this information alone. This outcome indicates that the population size is likely larger than the sample sizes, but additional data would be needed to accurately estimate the total number of dolphins in the population.

To know more about population size visit:

https://brainly.com/question/31262022

#SPJ11

The angle that a displacement vector makes with the x-axis can be found using the tangent function in trigonometry. In this case, the x and y components of the displacement vector are 1.23 m and 8.90 m, respectively. To find the angle θ, you can use the formula:

tan(θ) = (y component) / (x component) = (8.90 m) / (1.23 m)

To find the angle θ, you'll need to take the inverse tangent (arctangent) of the result:

θ = arctan(tan(θ)) = arctan((8.90 m) / (1.23 m))

By calculating the arctan, you will find the angle θ in degrees:

θ ≈ 82.15°

So, the displacement vector makes an angle of approximately 82.15° with the x-axis.

you know more about displacement vector pls visit-

https://brainly.com/question/30466999

#SPJ11

According to the question, the heat required to melt 5.5 gram of ice at 0°C is 1,839 J.

Heat is the transfer of energy from one object to another due to a difference in temperature. Heat is the total energy of the motion of particles in an object, including the kinetic energy of the particles and the energy associated with their relative positions. Heat energy is transferred by conduction, convection, and radiation. Conduction is the transfer of heat energy through direct physical contact between particles, while convection is the transfer of heat energy through the movement of a fluid, such as air or water. Radiation is the transfer of heat energy through electromagnetic waves.

The heat required to melt 1 gram of ice at 0°C is 334 J. Therefore, the heat required to melt 5.5 grams of ice at 0°C is 1,839 J.

To learn more about heat
https://brainly.com/question/934320
#SPJ4

The momentum thickness at the trailing edge of the blade in cm is 0.0000585 cm.  

The momentum thickness at the trailing edge of a blade in a wind tunnel, we need to use the following equation:

BM = ρ * V * S

The surface area of a blade can be calculated using the length, chord length, and angle of attack of the blade. For a NACA 0012 airfoil, the surface area can be calculated as:

S = 0.0012 * L * C

L = 2 meters and C = 0.05 meters for the blade of a wind tunnel, we get:

S = 0.0012 * 2 * 0.05

= 0.0006 meters

The density of air at standard temperature and pressure (STP) is approximately 1.225 kg/m. Substituting this value into the equation for BM, we get:

BM = 1.225 kg/m * 1.1 m/s * 0.0006 meters

= 0.0000714 kg

To convert this mass from kilograms to grams, we divide by 1000:

BM = 0.00714 kg

Finally, we can convert this mass from kilograms to cm by dividing by the mass of 1 cm of air:

BM = 0.00714 kg / (1.225 kg/m * 1000 kg/m)

= 0.0000585 cm

Therefore, the momentum thickness at the trailing edge of the blade in cm is 0.0000585 cm.  

Learn more about momentum Visit: brainly.com/question/18798405

#SPJ4

The speed of the block after the bullet embeds itself is equal to the velocity of the bullet before it embeds itself in the block, as per the law of conservation of momentum.

The law of conservation of momentum states that in a closed system, the total momentum before an event is equal to the total momentum after the event. In this scenario, the system is the bullet and the block. Before the bullet embeds itself in the block, the momentum of the system is equal to the momentum of the bullet, which is m * v, where m is the mass of the bullet and v is its velocity.

After the bullet embeds itself in the block, the total momentum of the system is still conserved. As the block was initially at rest, its momentum after the event is m * v, which is equal to the momentum of the bullet before it embeds itself in the block. Therefore, the speed of the block just after the bullet embeds itself in the block is equal to the velocity of the bullet before it embeds itself in the block, which is v.

Learn more about momentum here:

https://brainly.com/question/30677308

#SPJ11

According to the question A) By analysis of the P-wave and S-wave shadow zones.

Analysis is the process of breaking down information into smaller components in order to gain a better understanding of it. It focuses on identifying the key components and understanding how they interact with each other. Analysis involves examining data, looking for patterns, and drawing logical conclusions. It is an important tool used in a variety of fields, from business and economics to psychology and sociology.

The diameter of Earth's core and the nature of the outer core were discovered through the analysis of the P-wave and S-wave shadow zones, which are areas on the Earth's surface where seismic waves are shadowed by the core-mantle boundary. By studying the patterns of these shadow zones, scientists were able to infer the diameter of the core and the composition of the outer core.

Therefore, the correct option is A.
To learn more about analysis
https://brainly.com/question/30543896
#SPJ4

Complete Question:
1) Which of the following best characterizes how the diameter of Earth's core and the nature of the outer core were discovered?

A) By analysis of the P-wave and S-wave shadow zones.
B) By using the ratio of iron meteorites to stony meteorites to deduce the relative diameters of the core and mantle.

C) Because P-wave speeds are higher in the outer core than in the lower mantle.
D) Crystalline iron was found in lavas erupted from the deepest known hot spots

According to the question If they are far apart the capacitance is proportional to R₁R₂/(R₁-R₂).

Capacitance is the ability of a component or device to store electrical charge. It is measured in Farads, which is a unit of electrical capacitance. In electronics, capacitance is used to store energy in the form of charge, and it is also used to control current and voltage in a circuit. Capacitors are the most common type of component used to store energy and to control current and voltage in a circuit. When connected to a voltage source, a capacitor will store electrical energy in the form of an electric field.

The capacitance of two conducting spheres is proportional to,
C = (4πε0R₁R₂)/(R₁-R₂),
where ε0 is the permittivity of free space.
Therefore, the option is A.R₁R₂/(R₁-R₂).

To learn more about capacitance
https://brainly.com/question/27753307
#SPJ4