When a pot of water is put on a stove, the water at the surface gets hot primarily by conduction.
When a pot of water is put on a stove, the water at the surface gets hot primarily by conduction.
Conduction is the transfer of heat through a material by direct contact. When the pot is heated on the stove, the metal of the pot gets hot, and this heat is conducted to the water molecules in contact with the pot. These water molecules then transfer the heat to neighboring water molecules through conduction, and so on. As a result, the heat gradually spreads throughout the pot and heats up the water.
It's important to note that convection also plays a role in heating the water in a pot. As the water near the bottom of the pot gets heated, it becomes less dense and rises to the top, while cooler water near the top sinks to the bottom to replace it. This movement of water, called convection, helps to distribute the heat more evenly throughout the pot. However, in the initial stages of heating, when the water is still and has not yet started to convect, conduction is the primary mechanism by which the surface water gets heated.
To learn more about Conduction:
https://brainly.com/question/18568158
#SPJ4
If you have 24 bun slices, 8 hamburger patties, 10 slices of cheese, 12 pieces of bacon, 10 tomato slices and 10 slices of lettuce, what is the maximum amount of hamburgers you can make?
Answer:
8
Explanation:
because you only have 8 hamburger patties
See question in the picture below , will give brainliest for correct answer
Answer:
2H²+O²--> 2H²O (sry subscripts can't be written on moblie)
Explanation:
the first part of the reaction shows 4 hydrogen atoms and 2 oxygen atoms, and the second formula shows the same
Explain why phosphorus is a non-conductor of electricity.
Select all statements that describe a general Diels-Alder reaction.
A. The reaction is initiated by heat.
B. The reaction involves the breaking of three π bonds.
C. The reaction is endothermic.
D. The reaction involves the formation of three new C-C σ bonds.
E. The reaction is concerted.
statements that describe Diels-Alder reaction. are A. The reaction is initiated by heat. D. The reaction involves the formation of three new C-C σ bonds. E. The reaction is concerted.
The Diels-Alder reaction is initiated by heat or light and involves the formation of new C-C sigma (σ) bonds. It is a concerted reaction, meaning that the breaking of the π bonds and the formation of the σ bonds occur simultaneously. The reaction is exothermic, not endothermic, as it releases energy upon the formation of the new bonds. Therefore, statements B and C are incorrect.
Learn more about Diels-Alder reaction here:
https://brainly.com/question/30474400
#SPJ4
A compound contains C, H, I, S and has a molar mass of 229 g/mol. The sample has six times as much C
as H by mass. What is the molecular formula?
The molecular formula of the compound is CI4H12S4.
How to find the molecular formula of the compoundLet's assume that we have 6 grams of the compound, which means that 1 gram of the compound contains 1/6th of the total amount of the compound.
We are given that the compound contains C, H, I, S, and has a molar mass of 229 g/mol. Let's use x, y, z, and w to represent the number of moles of C, H, I, and S in one mole of the compound, respectively.
From the information given in the problem, we can set up the following system of equations:
x + y + z + w = 1 (since the sum of the mole fractions must equal 1)
12x = y (since the compound has six times as much C as H by mass)
To find the molecular formula of the compound, we need to determine the values of x, y, z, and w that satisfy these equations and give a molar mass of 229 g/mol.
The molar mass of the compound can be calculated as:
M = 12x + y + 127z + 32w
Substituting y = 12x from the second equation, we get:
M = 13x + 127z + 32w
We know that the molar mass of the compound is 229 g/mol, so we can set up the equation:
229 = 13x + 127z + 32w
We also know that x + y + z + w = 1, so we can substitute y = 12x, giving:
x + 12x + z + w = 1
13x + z + w = 1
We can solve these equations simultaneously to get:
x = 0.061
z = 0.504
w = 0.069
Substituting these values into the equation for the molar mass, we get:
M = 13(0.061) + 127(0.504) + 32(0.069) = 229
Therefore, the molecular formula of the compound is CI4H12S4.
Learn more about molecular formula here : brainly.com/question/15960587
#SPJ1
6. How many molecules in 77.2L of CO₂?
Answer:
divide it by
its molar mass
Explanation:
How does temperature affect the rate of a chemical reaction?
Answer:
Temperature affects the rate of a chemical reaction because it affects the rate of motion of the reacting particles. Higher temperatures increase the kinetic energy of particles, which increases their rate of collision and reaction.
Explanation:
If 3.21 mol of a gas occupies 56.2 L at 44°C and 793 torr, 5.29 mol of this gas occupies what volume would it be under these conditions?
The 132 L volume would it be under these conditions.
What is volume ?
Space is occupied by every three-dimensional object. Its volume serves as a gauge for this area. The area contained by an object's limits in three-dimensional space is referred to as its volume. Another name for it is an object's capacity.
What is mole ?
A mole is the atom's elementary particle, an ion. The mole of the substance is always related to the Avogadro number. The mole is always associated with the weight or mass of the element or substance. The standard unit of a mole is mol. The mole is a significant factor of the reactant and products to form an equation. A mole calculates the atom, ion, and substance weighs.
Therefore, 132 L volume would it be under these conditions.
Learn more about volume from the given link.
https://brainly.com/question/463363
#SPJ1
The rate constant for this first‑order reaction is 0.0990 s−1 at 400 ∘C. A⟶products After how many seconds will 19.4% of the reactant remain?
The rate constant for this first‑order reaction is 0.0990 s−1 at 400 ∘C. A⟶products, After 14.90 seconds will 19.4% of the reactant remain.
What is first order reaction ?The term first-order reaction is defined as a reaction that proceeds at a rate that depends linearly on only one reactant concentration.
We can use the formula;
0.693/t1/2 = 2.303/tlog (No/N)
Given that t1/2 = 0.693/k
= 0.693/0.0990 s − 1
= 6 seconds
Therefore,
0.693 / 6 = 2.303/t log 1/0.194
0.693/6 = 1.64/t
t = 1.64/0.11
t = 14.90 seconds
Thus, After 14.90 seconds will 19.4% of the reactant remain.
To learn more about the first order reaction, follow the link;
https://brainly.com/question/1769080
#SPJ9
HELP PLEASE!
Based on your Retention factor values for the 5 dye standards, order the dyes from most polar to least polar.
Red #3 - 0.000
Blue #1 - 0.58
Yellow #5- 0.286
Red #40- 0.046
Blue #2- 0.095
Answer:
Red #3 is the most polar, and Blue #1 is the least polar.
Explanation:
To order the dyes from most polar to least polar, we need to look at the retention factor values. The lower the retention factor value, the more polar the molecule. So, based on the given values, the order from most polar to least polar would be:
Red #3 - 0.000
Yellow #5 - 0.286
Blue #2 - 0.095
Red #40 - 0.046
Blue #1 - 0.58
Calculate the number of atoms in 0.25 mol of silicon
Answer: 1.5 x 10^23 atoms
Explanation:
Answer:
1.505 x 10^23 atoms in 0.25 moles of silicon.
Explanation:
The number of atoms in 0.25 moles of silicon can be calculated as follows:
1 mole of any substance contains Avogadro's number of atoms. Avogadro's number is approximately 6.022 x 10^23 atoms/mole.
So, if we have 0.25 moles of silicon, the number of atoms can be calculated as follows:
0.25 moles x (6.022 x 10^23 atoms/mole) = 1.505 x 10^23 atoms
Therefore, there are approximately 1.505 x 10^23 atoms in 0.25 moles of silicon.
An aqueous solution containing 35.5 g of an unknown molecular (non-electrolyte) compound in 158.6 g of water was found to have a freezing point of -1.4 ∘C.
An aqueous solution containing 35.5 g of an unknown molecular (non-electrolyte) compound in 158.6 g of water was found to have a freezing point of -1.4 ∘C. Therefore, 3.3 × 10² g/mol is the molecular mass.
What is molecular mass?The quantity of fill with a molecule is referred to as its molecular mass. It is also known as molecular weight.
It is computed by multiplying the mass for every atom by the amount of atoms belonging to the element that the molecule contains. Water, for example, is composed of two hydrogen atoms and one oxygen atom.
ΔT = i × Kf × m
m = ΔT / i × Kf
m = (1.4°C) / 1 × (1.86 °C/m) = 0.70 m
moles of solute = m × kg of solvent = 0.70 mol/kg × 0.1500 kg = 0.11 mol
M = 35.9 g/0.11 mol = 3.3 × 10² g/mol
Therefore, 3.3 × 10² g/mol is the molecular mass.
To know more about molecular mass, here:
https://brainly.com/question/2426621
#SPJ9
While doing calculations after a chemical analysis was
completed, Johanna discovered that 164.2 mol of Na₂CO3
were formed. How many grams of product were formed?
The term mole concept is used here to determine the grams of product formed. The grams of product formed is 17401.9 g.
What is mole?One mole of a substance is that amount of it which contains as many particles or entities as there are atoms in exactly 12 g of carbon - 12.
Number of moles = Given mass / Molar mass
The molar mass of Na₂CO3 = 105.98 g/mol
Then the mass of Na₂CO3 = Molar mass × Number of moles
= 105.98 g/mol × 164.2 mol
= 17401.9 g
Thus the grams of product formed is 17401.9 g.
To know more about mole, visit;
https://brainly.com/question/15209553
#SPJ9
In the greenhouse effect, far infrared radiation is earth's surface and absorbed and reemitted by gases in the atmosphere. These gases have in concentration over the past century.
In the greenhouse effect, gases in the atmosphere absorb and reemit far-infrared radiation that is released by the Earth's surface.
Thus, Over the past century, the concentration of these gases, also referred to as greenhouse gases, has risen.
The greenhouse effect is a natural process that aids in controlling the temperature of the Earth. Some of the solar energy that strikes the Earth's surface is absorbed and later reemitted as infrared energy.
By preventing some of the heat from escaping into space and trapping it instead, this mechanism causes the atmosphere to warm.
Thus, In the greenhouse effect, gases in the atmosphere absorb and reemit far-infrared radiation that is released by the Earth's surface.
Learn more about Radiation, refer to the link:
https://brainly.com/question/31106159
#SPJ12
a brass rod, a copper rod, an iron rod and a lead rod went into water with wax on top, which one rusted first if lead stayed on the longest and copper for the least
A brass rod, a copper rod, an iron rod and a lead rod went into water with wax on top, an iron rod will rust first if lead stayed on the longest and copper for the least.
What is rust?Rust is an iron oxide, which is a typically reddish-brown oxide created by the catalytic interaction of iron with oxygen in the absence of water or air moisture. Rust is often connected with the corrosion of refined iron and is composed of hydrous iron(III) oxides (Fe2O3nH2O) with iron(III) oxide-hydroxide (FeO(OH), Fe(OH)3).
Given enough time and the presence of oxygen and water, any iron mass may ultimately rust completely. A brass rod, a copper rod, an iron rod and a lead rod went into water with wax on top, an iron rod will rust first if lead stayed on the longest and copper for the least.
Therefore, an iron rod will rust first if lead stayed on the longest and copper for the least.
To learn more about rust, here:
https://brainly.com/question/19340862
#SPJ1
Part 6 Computation (12 points) 1. Calculate the average atomic mass of Iron using the chart provided. (6pts) Isotopic symbol 54Fe 56Fe 57 Fe 58Fe Natural Abundance (%) 5.8 91.7 2.2 0.3
Answer:
84.066 amu
Explanation:
The average atomic mass of iron can be calculated using the following formula:
Average atomic mass = (54Fe * 0.058 + 56Fe * 0.917 + 57Fe * 0.022 + 58Fe * 0.003) / (0.058 + 0.917 + 0.022 + 0.003)
Plugging in the numbers, we get:Average atomic mass = (54 * 0.058 + 56 * 0.917 + 57 * 0.022 + 58 * 0.003) / (0.058 + 0.917 + 0.022 + 0.003)
Average atomic mass = (31.12 + 51.592 + 1.254 + 0.174) / (0.058 + 0.917 + 0.022 + 0.003)
Average atomic mass = 84.066 / (0.058 + 0.917 + 0.022 + 0.003)Average atomic mass = 84.066 / 1
Average atomic mass = 84.066So, the average atomic mass of Iron is 84.066 atomic mass units (amu).
A 33.41 g piece of copper at 95.6 Celsius was placed in a sample of water at 21.65 Celsius. The temperature of the water increased to 22.87 Celsius. To what mass of water was the cooper added? The specific heat of copper is 0.385 J/g C
Answer:
43.63 g of water.
Explanation:
We can use the equation for heat transfer to solve for the mass of water:
q = cmΔT
where
q = heat transfer
c = specific heat
m = mass
ΔT = change in temperature
The heat transfer from the copper to the water can be expressed as:
q = cmΔT
q = (33.41 g)(0.385 J/g°C)(95.6°C - 21.65°C)
And the heat transfer caused a change in temperature in the water, which can be expressed as:
q = mLΔT
q = (m)(4.18 J/g°C)(ΔT)
Equating the two expressions for heat transfer, we can solve for the mass of water:
(33.41 g)(0.385 J/g°C)(95.6°C - 21.65°C) = (m)(4.18 J/g°C)(22.87°C - 21.65°C)
m = (33.41 g)(0.385 J/g°C)(95.6°C - 21.65°C) / (4.18 J/g°C)(22.87°C - 21.65°C)
m = 43.63 g
So the copper was added to 43.63 g of water.
Write a symbolic notation for atom with 5 protons and 4 neutron
Answer:
it's Beryllium
Explanation:
Given the chemical equation: 6 Cs + N₂
-2 CsgN
If the above reaction produces 58.3g of cesium nitride how much of the other substances were involved?
According to law of conservation of mass, if mass of product is 58.3 g the mass of nitrogen is 28 g and that of cesium nitride is 30.3 g which sums up to 58.3 g.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Mass of cesium nitride= mass of cesium + mass of nitrogen, thus, mass of nitrogen = 14×2=28 g and that of cesium is 58.3-28=30.3 g.
Learn more about law of conservation of mass,here:
https://brainly.com/question/28711001
#SPJ1
Which crop did texas farmers produce the most of in the years after the civil war?.
In the years after the civil war texas farmers produced cotton the most among all crops,
The Importance of Cotton in Texas Agriculture After the Civil WarIn the years following the Civil War, cotton was the most important cash crop in Texas and the primary source of income for many farmers. Texas had favorable climatic conditions and fertile soils that were well-suited for cotton cultivation. Additionally, the demand for cotton was high both domestically and internationally, which made it a lucrative crop for farmers. As a result, cotton production in Texas increased significantly in the years after the Civil War, with the state becoming one of the largest cotton producers in the country. However, this dependence on a single crop also left farmers vulnerable to market fluctuations and crop failures, which led to economic hardship and debt for many.
To know more about agriculture, visit:https://brainly.com/question/12568494
#SPJ4
What is the first step in the immediate aftermath of exposure to a biohazard involving a percutaneous injury (through the skin)?
How is the molar mass of a compound similar to its formula mass?
How is the molar mass of a compound different from its formula mass?
Answer:
the fromu;la is 50
Explanation:
becuase it is soooopo understand
Answer:
The molar mass of a compound is similar to its formula mass in that both represent the sum of the atomic masses of all the elements in the compound. The formula mass is the total atomic mass of the elements in the chemical formula of a compound, while the molar mass is the mass of one mole of the compound.
The molar mass of a compound is different from its formula mass in that the molar mass is a unit of measurement for the amount of substance, whereas the formula mass is simply a numerical value representing the total atomic mass of the elements in the compound. The molar mass is expressed in units of grams per mole (g/mol), whereas the formula mass is expressed in atomic mass units (amu). Additionally, the molar mass takes into account the Avogadro's constant, which is the number of entities in one mole of a substance, whereas the formula mass does not.
Explanation:
ALLEN
Which substance can be classified as an Arrhenius acid
Answer:
HCl (Hydrochloric acid) can be classified as an Arrhenius acid.
Explanation:
An Arrhenius acid is a substance that donates hydrogen ions (H+) in an aqueous solution, resulting in an increase in the hydrogen ion concentration (pH). Examples of Arrhenius acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), and nitric acid (HNO3).
Answer:
HCl (Hydrochloric acid)
Explanation:
5SO2 + 2MnO4- + 2H205SO42- + 2Mn2+ + 4H+ Calculate the number of grams of SO2 in a sample of air if 7.37 mL of 0.008 M KMnO4 solution are required for the titration.
Answer:
0.09536 g of SO2 in the sample of air
Explanation:
The first step is to convert the volume of KMnO4 solution to moles. This can be done using the formula:
moles = Molarity x volume (in liters)
So,
moles = 0.008 M x (7.37 mL) x (1 L/1000 mL)
= 0.0000596 moles
Next, we need to find the ratio of moles of SO2 to moles of KMnO4 in the balanced equation:
5SO2 + 2MnO4- + 2H205SO42- + 2Mn2+ + 4H+
From the equation, it can be seen that 2 moles of KMnO4- react with 5 moles of SO2. So,
moles of SO2 = (moles of KMnO4) x (5 moles of SO2 / 2 moles of KMnO4)
= 0.0000596 x (5/2)
= 0.0001495 moles
Finally, to convert moles of SO2 to grams, we can use the formula:
grams = moles x molar mass
Since the molar mass of SO2 is 64 g/mol,
grams = 0.0001495 x 64
= 0.09536 g
So, there are 0.09536 g of SO2 in the sample of air.
The dosage of an asthma drug is 7 mg/kg of body mass. Calculate the dosage, in milligrams, required for a 43 lb child.
The dosage of an asthma drug is 7 mg/kg of body mass. The required dosage for the 43 lb child is 32.2 mg.
What do you mean by drugs?
Drugs are substances intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease or to otherwise enhance physical or mental well-being.
An asthma drug is a medication used to treat asthma symptoms. Common types of asthma drugs include bronchodilators, corticosteroids, and anti-inflammatory drugs.
So,
43 lbs = 19.5 kg
7 mg/kg x 19.5 kg = 136.5 mg
136.5 mg = 32.2 mg (rounded to the nearest tenth)
Hence, the required dosage for the 43 lb child is 32.2 mg.
To know more about drugs,
https://brainly.com/question/29426385
#SPJ1
Metabolism can best be described as
Answer: The sum of all chemical reactions in the body.
Catabolism (breaking down)- releases energy ATP
Anabolism (building up)- Uses energy to synthesize what body needs.
Explanation:
While calculating the ending amounts of product after an
experiment, Jose found that he had made 0.35 moles of
iron. His goal was to make 40 grams of iron, did he reach
his goal?
Yes, Jose reached his goal.
What is the mole?In chemistry, the mole is a unit used to measure the amount of a substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of pure carbon-12. This number is known as Avogadro's number and is approximately equal to 6.022 × 10^23.
The concept of the mole is fundamental to many areas of chemistry, including stoichiometry, the study of chemical reactions and their quantitative relationships. It allows chemists to make precise measurements and calculations, and to compare and relate the properties of different substances.
Number of moles in 40 g of iron = 40g/56 g/mol
= 0.7 moles
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
What are the different modes of reproduction in organisms, such as asexual and sexual reproduction?
Answer:
Asexual reproduction is a mode of reproduction that occurs without the involvement of sex cells or meiosis. In this type of reproduction, a single organism produces offspring that are genetically identical to the parent. This can happen through methods such as budding, fragmentation, and self-fertilization.
Sexual reproduction, on the other hand, involves the fusion of gametes or sex cells from two different organisms to produce offspring that have genetic material from both parents. This results in offspring with a unique combination of traits and genetic diversity. Some common examples of sexual reproduction include the exchange of sperm and eggs in animals, and the fusion of male and female gametes in plants.
Explanation:
A chemist working as a safety inspector finds an unmarked bottle in a lab cabinet. A note on the door of the cabinet says the cabinet is used to store bottles of dimethyl sulfoxide, acetone, diethytamin, tetrahydrofuran, and carbon tetrachloride. The chemist plans to identify the unknown liquid by measuring the density and comparing to known densities. First, from her collection of Material Safety Data Sheets (MSOS), the chemist finds the following information: Next, the chemist measures the volume of the unknown liquid as 0.767 L and the mass of the unknown liquid as 682. g. Calculate the density of the liquid. Round your answer to 3 significant digits. g. cm^-3 Given the data above, is it possible to identify the liquid? yes no If it is possible to identify the liquid, do so. dimethyl sulfoxide acetone diethylamine tetrahydrofuran carbon tetrachloride times 10
Yes, it is possible to identify the liquid, and the density of the liquid is closest to 0.889 g/cm³ so the liquid is most likely tetrahydrofuran.
To calculate the density of the unknown liquid, we use the formula:
Density = Mass / Volume
Substituting the given values, we get:
Density = 682. g / 0.767 L
Density = 888.5 g/L
Rounding to three significant digits, the density of the unknown liquid is 889 g/L.
Using the information provided in the question, we can compare the density of the unknown liquid to the known densities of the listed chemicals. The densities (in g/cm³) of the chemicals are:
Dimethyl sulfoxide: 1.092
Acetone: 0.790
Diethylamine: 0.707
Tetrahydrofuran: 0.889
Carbon tetrachloride: 1.594
Comparing the density of the unknown liquid to the known densities, we see that it is closest to the density of tetrahydrofuran, which is 0.889 g/cm³. Therefore, it is likely that the unknown liquid is tetrahydrofuran.
Learn more about density here:
https://brainly.com/question/29775886
#SPJ4
Why is brine a more effective de-ice solution than solid ice melt products? select all that apply.
For the following reasons, brine is a more potent de-icing solution than solid ice melt products: Because brine freezes at a lower temperature than water, it can remain liquid at lower temperatures.
The typical use of brine, a salt-water solution, includes uses as a de-icing agent, a food preservative, and a source of minerals for industrial processes. Brine is a substance that is used in de-icing to either stop the growth of ice or to melt already-existing ice on sidewalks, highways, and other surfaces. It functions by bringing down water's freezing point, which causes ice to melt at lower temperatures. Compared to solid ice melt products, which may contain chemicals damaging to the environment, brine is typically seen as a more cost- and environmentally-friendly de-icing method. Brine is a common choice for de-icing applications since it is simple to prepare and use.
Learn more about brine here:
https://brainly.com/question/13537110
#SPJ4
