When an airplane is flying 200 mph at 5000-ft altitude in a standard atmosphere, the air velocity at a certain point on the wing is 273 mph relative to the airplane. (a) What suction pressure is developed on the wing at that point? (b) What is the pressure at the leading edge (a stagnation point) of the wing?

Answers

Answer 1

Answer:

P1 = 0 gage

P2 = 87.9 lb/ft³

Explanation:

Given data

Airplane flying = 200 mph = 293.33 ft/s

altitude height = 5000-ft

air velocity relative to the airplane = 273 mph = 400.4 ft/s

Solution

we know density at height 5000-ft is 2.04 × [tex]10^{-3}[/tex] slug/ft³

so here P1 + [tex]\frac{\rho v1^2}{2}[/tex]  = P2 + [tex]\frac{\rho v2^2}{2}[/tex]

and here

P1 = 0 gage

because P1 = atmospheric pressure

and so here put here value and we get

P1 + [tex]\frac{\rho v1^2}{2}[/tex]  = P2 + [tex]\frac{\rho v2^2}{2}[/tex]

0 + [tex]\frac{2.048 \times 10^{-3} \times 293.33^2}{2}[/tex]  [tex]= P2 + \frac{2.048 \times 10^{-3} \times 400.4^2}{2}[/tex]  

solve it we get

P2 = 87.9 lb/ft³


Related Questions

1. In 214 BC, Archimedes invented a large spherical-type mirror used to focus the sun's intense rays onto far away enemy boats, which would eventually light them on fire. If the boats were travelling in a nearby channel approximately 1,000 m from the river bank, what would the radius of curvature of his mirror need to be? Show your work.

Answers

Answer:

2000 m

Explanation:

since the boat is 1000 m from the river bank, the beam must be focused at this point. This indicates that the focal length is 1000 m

for a spherical mirror, the focal length is given by

f = R/2

where R is the radius of curvature

1000 = R/2

R = 2000 m

R = 2000 m

this means that the radius of curvature must be 2000 m

g A proton is held at rest in a uniform electric field. When it is released, the proton will lose... electrical potential energy. kinetic energy. both kinetic energy and electric potential energy. neither kinetic energy or electric potential energy.

Answers

Answer:

It will lose electrical potential energy.

Explanation:

A photon held at rest in a uniform electrical field will lose electrical potential energy when it is released this is because the electrical potential energy is the energy posses by the photon at rest or by virtue of the position is converted to kinetic energy which is energy posses by a body in motion.

Since the photon is released and set in motion , it now has kinetic energy and has lost the potential energy because it is set in motion.

Zinc is added to a breaker containing hydrochloric acid and the beaker gets warm what type os reaction is this

Answers

Answer:

Exothermic

Explanation:

Depending on the unit you are in, the answer may vary.

This is an exothermic reaction because it produces heat (the beaker gets warm).

g The potential energy of a pair of hydrogen atoms separated by a large distance x is given by U(x)=−C6/x6, where C6 is a positive constant. Part A What is the force that one atom exerts on the other? Express your answer in terms of C6 and x. Fx = nothing Request Answer Part B Is this force attractive or repulsive? Is this force attractive or repulsive? attractive repulsive

Answers

Answer:

[tex]F_x = -\frac{6 C_6}{2^7}[/tex]

Attractive

Explanation:

Data provided in the question

The potential energy of a pair of hydrogen atoms given by [tex]\frac{C_6}{X_6}[/tex]

Based on the given information, the force that one atom exerts on the other is

Potential energy μ = [tex]\frac{C_6}{X_6}[/tex]

Force exerted by one atom upon another

[tex]F_x = \frac{\partial U}{\partial X} = \frac{\partial}{\partial X} (-\frac{C_6}{X^6})[/tex]

or

[tex]F_x = \frac{\partial}{\partial X} (\frac{C_6}{X^6})[/tex]

or

[tex]F_x = -\frac{6 C_6}{2^7}[/tex]

As we can see that the [tex]C_6[/tex] comes in positive and constant which represents that the force is negative that means the force is attractive in nature

what statement is true according to newton’s first law of motion?

a. in the absence of unbalanced force an object at rest will stay at rest and an object in motion will come to a stop.

b. in the absence of an unbalanced force, an object will start moving and an object in motion will come to a stop.

c. in the absence of an unbalanced force, an object at rest will stay at rest and an object in motion will stay in motion.

d. in the absence of an unbalanced force, an object will start moving and an object in motion will stay in motion.

Answers

Answer:

  c.  in the absence of an unbalanced force, an object at rest will stay at rest and an object in motion will stay in motion.

Explanation:

First law: things keep doing what they are doing, unless force is applied.

1. For each of the following scenarios, describe the force providing the centripetal force for the motion: a. a car making a turn b. a child swinging around a pole c. a person sitting on a bench facing the center of a carousel d. a rock swinging on a string e. the Earth orbiting the Sun.

Answers

Complete Question

For each of the following scenarios, describe the force providing the centripetal force for the motion:

a. a car making a turn

b. a child swinging around a pole

c. a person sitting on a bench facing the center of a carousel

d. a rock swinging on a string

e. the Earth orbiting the Sun.

Answer:

Considering a

    The force providing the centripetal force is the frictional force on the tires \

          i.e  [tex]\mu mg = \frac{mv^2}{r}[/tex]

    where [tex]\mu[/tex] is the coefficient of static friction

Considering b

   The force providing the centripetal force is the force experienced by the boys  hand on the pole

Considering c

     The force providing the centripetal force is the normal from the bench due to the boys weight

Considering d

     The force providing the centripetal force is the tension on the string

Considering e

      The force providing the centripetal force is the force of gravity between the earth and the sun

Explanation:

Potential difference is measured in which units?
volts
amps
currents
watts

Answers

Answer:

Potential difference is measured in volts

Explanation:

The standard metric unit on electric potential difference is the volt, abbreviated V and named in honor of Alessandro Volta. One Volt is equivalent to one Joule per Coulomb.

Answer:

Your answer is A.) volts

Explanation:

A 1.70 m tall woman stands 5.00 m in front of a camera with a 50.00 cm focal
length lens. Calculate the size of the image formed on flim​

Answers

Answer:

18.89cm

Explanation:

As we know that the person is standing 5m in front of the camera

[tex]d_0=5m=500cm[/tex]

The focal length of the lens =50cm

f=50 cm

By Lens formula we have:

[tex]\dfrac{1}{f} = \dfrac{1}{d_i} + \dfrac{1}{d_o}\\\dfrac{1}{50} = \dfrac{1}{d_i} + \dfrac{1}{500}\\\dfrac{1}{d_i} =\dfrac{1}{50}-\dfrac{1}{500}\\\dfrac{1}{d_i}=0.018\\d_i=55.56cm[/tex]

By the formula of magnification

[tex]\dfrac{h_i}{h_o} = \dfrac{55.56}{500}\\\\h_i = \dfrac{55.56}{500} \times h_o\\\\ h_o=1.70m=170cm\\\\Therefore: h_i=\dfrac{55.56}{500} \times$ 170 cm\\\\h_i =18.89 cm[/tex]

The height of the image formed is 18.89cm.

The Great Lakes are all part of what? The Mississippi River The St. Lawrence Seaway A large body of salt lakes The Missouri River

Answers

Answer:

St Lawrence Sea way

Explanation:

The great lake connects the middle of North America which is at the Canada-United states border connecting to the Atlantic Ocean through the St Lawrence River.

a steel ball is dropped from a diving platform use the approximate value of g as 10 m/s^2 to solve the following problem what is the velocity of the ball 0.9 seconds after its released

Answers

Answer:

The final speed of the ball is 9 m/s.

Explanation:

We have,

A steel ball is dropped from a diving platform. It is required to find the velocity of the ball 0.9 seconds after its released. It will move under the action of gravity. Using equation of motion to find it as :

[tex]v=u+at[/tex]

u = 0 (at rest), a = g

[tex]v=gt\\\\v=10\times 0.9\\\\v=9\ m/s[/tex]

So, the final speed of the ball is 9 m/s.

At an accident scene on a level road, investigators measure a car’s skid mark (mass of car is M) to be of length d. It was a rainy day and the coefficient of friction was estimated to be μk.
A) Use these data to determine the speed of the car when the driver slammed on (and locked) the brakes.B) Why does the car's mass not matter?1) Since both the change in kinetic energy and the work done by friction are proportional to the mass. The mass cancels out of the equation.2) Since the work done by friction does not depend on mass.3) Since the change in kinetic energy and the work done by friction do not depend on mass.

Answers

Answer:

1) Since both the change in kinetic energy and the work done by friction are proportional to the mass. The mass cancels out of the equation

Explanation:

The kinetic  friction works against the kinetic energy of the car and the car stops when these two equalises .

friction force = μk x R , μk is coefficient of kinetic friction and R is reaction from the ground.

= μk x mg

work done by friction

= force x displacement

=  μk x mg x d

kinetic energy of car at the time of accident = 1/2 m v²

kinetic energy = work done by friction

1/2 m v² = μk x mg x d

d = v² / (2 μk x g)

v² = 2dμk g

v = √(2dμk g)

Since both the change in kinetic energy and the work done by friction are proportional to the mass. The mass cancels out of the equation

1. Describe what must happen to an atom to make it
A. A cation
B. An anion
2. Describe why some acids are strong while other acids are weak
3. Compare protons, neutrons and electron, listing their similarities and differences
4. Explain why you breathe faster and deeper when exercising

Answers

Answer:

Explanation:

Atoms—and the protons, neutrons, and electrons that compose them—are extremely small. For example, a carbon atom weighs less than 2 × 10−23 g, and an electron ... The amu was originally defined based on hydrogen, the lightest element, ... but three-letter symbols have been used to describe some elements that have ...

Protons: Protons are positively charged particles that are also found in the nucleus. Like neutrons, protons give mass to the atom but do not participate in ... 3) Electrons: Electrons are negatively charged particles that are found in ... pair of electrons with 4 different hydrogen atoms, forming a molecule of CH4 (methane).Elements differ from each other in the number of protons they have, e.g. ... Atoms of an element that have differing numbers of neutrons (but a constant atomic ... Electrons, because they move so fast (approximately at the speed of light), ...toms are made up of particles called protons, neutrons, and electrons, which ... Therefore, they do not contribute much to an element's overall atomic mass. ... For instance, iron, Fe, can exist in its neutral state, or in the +2 and +3 ionic states. ... Isotopes of the same element will have the same atomic number but different ...

Shrinking Loop. A circular loop of flexible iron wire has an initial circumference of 165 cmcm , but its circumference is decreasing at a constant rate of 14.0 cm/scm/s due to a tangential pull on the wire. The loop is in a constant uniform magnetic field of magnitude 0.800 TT , which is oriented perpendicular to the plane of the loop. Assume that you are facing the loop and that the magnetic field points into the loop.
(a) Find the emf induced in the loop at the instant when 9.0 s have passed.
(b) Find the direction of the induced current in the loop as viewed looking along the direction of the magnetic field.

Answers

Answer:

(a)  emf = 1.18 mV

(b) counter-clockwise sense

Explanation:

(a) The induced emf is given by the following formula:

[tex]emf=-\frac{d\Phi_B}{dt}[/tex]     (1)

where:

ФB: magnetic flux = AB = (area of the loop)*(magnitude of the magnetic field)

A = πr^2

B = 0.800 T

You replace the expression for the magnetic flux in the equation (1):

[tex]emf=-B\frac{\Delta A}{\Delta t}=-B\frac{A_2-A_1}{t_2-t_1}[/tex]

A1: initial area

A2: final area

t2-t1: time interval  = 9.0s

Then you have to calculate the change in the area of the loop, by using the information about the circumference of the loop. First you calculate the radius of the loop for a circumference of 165 cm = 1.65m

[tex]s=1.65m=2\pi r\\\\r=\frac{1.65m}{2\pi}=0.262m[/tex]

You calculate the initial area A1:

[tex]A_1=\pi (0.262m)^2=0.215m^2[/tex]

After 9.0 second the circumference will be:

[tex]s'=1.65m-0.14\frac{m}{s}(9.0s)=0.39m[/tex]

the new radius and the final area is:

[tex]r=\frac{0.39m}{2\pi}=0.062m[/tex]

[tex]A_2=\pi(0.062m)^2=0.012m^2[/tex]

Finally, you replace in the equation (1):

[tex]emf=-(0.800T)\frac{0.012m^2-0.215m^2}{9.0s}=1.8*10^{-3}V=1.8mV[/tex]

The induced emf in the circular loop is 1.18mV

(b) The induced emf generates an electric current, which produces a magnetic field that is opposite to the direction of the constant magnetic field of 0.800T. Due to this magnetic field point into the loop. The current has to have a direction in a counter-clockwise sense.

What is the period of a wave if the frequency is? 5 Hz

Answers

Answer:  If the woodpecker drums upon a tree 5 times in one second, then the frequency is 5 Hz; each drum must endure for one-fifth a second, so the period is 0.2 s.

A fuel pump sends gasoline from a car's fuel tank to the engine at a rate of 5.37x10-2 kg/s. The density of the gasoline is 739 kg/m3, and the radius of the fuel line is 3.37x10-3 m. What is the speed at which gasoline moves through the fuel line

Answers

Answer:

Speed v = 2.04 m/s

the speed at which gasoline moves through the fuel line is 2.04 m/s

Explanation:

Given;

Mass transfer rate m = 5.37x10^-2 kg/s.

Density d = 739 kg/m3

radius of pipe r = 3.37x10^-3 m

We know that;

Density = mass/volume

Volume = mass/density

Volumetric flow rate V = mass transfer rate/density

V = m/d

V = 5.37x10^-2 kg/s ÷ 739 kg/m3

V = 0.00007266576454 m^3/s

V = 7.267 × 10^-5 m^3/s

V = cross sectional area × speed

V = Av

Area A = πr^2

V = πr^2 × v

v = V/πr^2

Substituting the given values;

v = 7.267 × 10^-5 m^3/s/(π×(3.37x10^-3 m)^2))

v = 0.203678639672 × 10 m/s

v = 2.04 m/s

the speed at which gasoline moves through the fuel line is 2.04 m/s

EASY! WILL GIVE BRAINLIEST!

Find the conductivity of a conduit with a cross-sectional area of 0.50 cm2 and a length of 15 cm if its conductance G is 0.050 ohm-1.

σ = _____ ohm-1cm-l

3
75
1.5
0.0017

Answers

the answer is 1.5 hope this helps

Answer:

1.5

Explanation:

0.5=σ/(15/0.5)

σ=3/2 or 1.5

A parallel-plate capacitor has square plates that are 7.20 cm on each side and 3.40 mm apart. The space between the plates is completely filled with two square slabs of dielectric, each 7.20 cm on a side and 1.70 mm thick. One slab is Pyrex glass and the other slab is polystyrene. If the potential difference between the plates is 96.0 V, find how much electrical energy (in nJ) can be stored in this capacitor.

Answers

Answer:

U = 218 nJ

Explanation:

We are given;

Spacing between the plates; d = 3.4 mm = 3.4 × 10^(-3) m

Voltage across the capacitor; V = 96 V

Dimension of the square plates is 7.2cm x 7.2cm.

So, Area = 7.2 × 7.2 = 51.84 cm² = 51.84 × 10^(-4) m²

Permittivity of free space; ε_o = 8.85 × 10^(-12) C²/N.m²

From relative permeability table;

Dielectric constant of Pyrex; k1 = 5.6

Dielectric constant of polystyrene; k2 = 2.56

Now, formula for capacitance of a capacitor with Dielectric is;

C = kC_o

Where, C_o = ε_o(A/d)

Since there are 2 capacitors, d will now be d/2 = (3.4 × 10^(-3))/2 m = 1.7 × 10^(-3)

Since we have 2 capacitor, thus ;

C1 = k1*ε_o*(A/d)

C1 = (5.6 × 8.85 × 10^(-12) × (51.84 × 10^(-4))/(1.7 × 10^(-3))

C1 = 1.51 × 10^(-10) F

Similarly;

C2 = (2.56 × 8.85 × 10^(-12) × (51.84 × 10^(-4))/(1.7 × 10^(-3))

C2 = 0.691 × 10^(-10) F

For capacitors in series, formula for total capacitance(Cs) is;

1/Cs = (1/C1) + (1/C2)

Simplifying this, we have;

Cs = (C1*C2)/(C1 + C2)

Plugging in the relevant values ;

Cs = (1.51 × 10^(-10)*0.691 × 10^(-10))/((1.51 × 10^(-10)) + (0.691 × 10^(-10)))

Cs = 0.474 × 10^(-10) F

The formula for energy stored in a capacitor with 2 Dielectrics is given as;

U = ½Cs*V²

So,

U = ½ × 0.474 × 10^(-10) × 96²

U = 2.18 × 10^(-7) J = 218 × 10^(-9) = 218 nJ

How much displacement will a spring with a constant of 120N / m achieve if it is stretched by a force of 60N?

Answers

Answer:

Explanation:

There's a formula for this:

[tex]F = k*displacement[/tex]

F being force, k being the spring constant, and displacement being the change in x

We are given the force and the spring constant, so this is essentially isolating the Δx term. Do 60N/120N per meter. The newtons cancel out and you get a final answer of Δx = 0.5 meters

Mark Watney (Matt Damon in the Martian movie) and Marvin the Martian (Looney Tunes cartoon character) are having an argument on the surface of Mars (negligible air resistance). They are testing out their new potato launcher that fires projectiles at a constant speed. Mark launches his potato at an angle of 60◦ and Marvin launches his identical potato at an angle of 30◦ . Without any calculations try to answer the following questions, and justify each answer.

(A) Which potato lands farther away from the launcher (potatoes are launched from ground level)?

(B) Which potato spends more time in the air before hitting the ground

(C) Which potato has a greater speed just before it hits the ground?

Answers

Answer:

A) The two potatoes cover the same horizontal distance from the launcher.

B) Mark's potato spends more time in the air than Marvin's potato before hitting the ground.

C) Marvin's potato hits the ground with a greater speed than Mark's potato

Explanation:

A) For projectile motion, the final horizontal distance of the projectile from where it was initially launched (its range) is given as

R = (u² sin 2θ)/g

where

u = initial velocity of the projectile

θ = angle above the horizontal at which the projectile was launched = 30°, 60°

g = acceleration due to gravity on Mars

Since, u and g are the same for Mark and Marvin, sin 2θ would determine which range is higher.

Sin (2×60°) = sin 120°

Sin (2×30°) = sin 60°

Sin 120° = Sin 60°

Hence, the two potatoes cover the same horizontal distance from the launcher.

B) Time spent in the air for a projectile is given as

T = (2u sin θ)/g

Again, since u and g are the same for Mark and Marvin on Mars, sin θ will give the required idea of whose potato spends more time in the air.

Sin 60° = 0.866

Sin 30° = 0.50

Sin 60° > Sin 30°

Hence, Mark's potato spends more time in the air than Marvin's potato.

C) The horizontal velocity for projectile motion is constant all through the motion and is equal to u cos θ

u cos 60° < u cos 30°

And the initial vertical velocity is u sin θ

Final vertical velocity

= (initial vertical velocity) - gt

g = acceleration due to gravity on Mars

T = time of flight

For Mark,

initial vertical velocity = u sin 60°, greater than Marvin's u sin 30°

And Mark's potato's time of flight is greater as established in (B) above.

But for Marvin

initial vertical velocity = u sin 30°, less than Mark's u sin 60°

And Marvin's potato's time of flight is lesser as established in (B) above

So, at the end of the day, the final vertical velocity is almost the same for both Mark's and Marvin's potatoes.

Hence, the horizontal component of the final velocity edges the final speed of the potatoes just before hitting the ground in Marvin's favour.

Hope this Helps!!!

A freight car moves along a frictionless level railroad track at constant speed. The freight car is open on top. A large load of coal is suddenly dumped into the car. What happens to the speed of the freight car

Answers

Answer:

The speed of the freight car decreases.

Explanation:

According to the law of conservation of momentum indicates that for colliding in an isolated system, the total momentum pre and post collision is same for the two objects this is done because the momentum that one item has lost is same for the momentum that the other received

In the given situation, the freight car travels at constant speed along a frictionless railroad line. The top floor freight car is open. Then a huge load of coal is dumped inside the car.

Therefore the speed of the freight car decreased by applying the law of conservation of momentum i

If radio waves are used to communicate with an alien spaceship approaching Earth at 10% of the speed of light c, the aliens would receive our signals at speed of:_______.
a. 0.99c
b. 1.10c
c. 1.00c
d. 0.90c
e. 0.10c

Answers

Answer:

3×10^7 m/s or 0.10c (e)

Explanation: If the actual value of the speed of light were to be put into consideration.

Given that the speed of light is c = 3.0×10^8m/s

The alien spaceship is approaching at the rate of 10% of the speed of light.

10% of 3.0×10^8m/s

10/100 × 3.0×10^8m/s

0.1 ×3.0×10^8m/s

3×10^7 m/s. Which is the same thing as 0.1 of c = 0.1×c

Answer: 1.00c

Explanation: I got it correct on the homework

At a time when mining asteroids has become feasible, astronauts have connected a line between their 3220-kg space tug and a 6240-kg asteroid. They pull on the asteroid with a force of 362 N. Initially the tug and the asteroid are at rest, 311 m apart. How much time does it take for the ship and the asteroid to meet

Answers

-- F = m a ... ==>  a = F/m

-- The tension in the rope is 362 N.  That same force acts on the asteroid and on the tug, pulling them together.

-- The asteroid's acceleration is 362N / 6240 kg = 0.058 m/s², headed for a point on the rope somewhere between the asteroid and the tug.

-- The tug's acceleration is 362 N / 3220 kg = 0.112 m/s², also headed for a point on the rope somewhere between the tug and the asteroid.

-- So now we have a gap between them, initially 311 m long, closing with a speed that starts at zero and accelerates at  0.170 m/s² .

-- D = (1/2) a T²

311 m = (1/2) (0.170 m/s²) (T²)

T²  =  311 m / 0.085 m/s²

T = √(311/0.085)  seconds

T = 60.41 seconds

The answer I get is so durn near 60 seconds (1 minute) that it suggests two things to me:  ==> That's where the weird numbers of 362N and 311m came from, and ==> there's a good chance that my answer is correct.

Note:  It's important to me that you know that 5 points for this one is really cheap and chintzy, and the reason I decided to try it was only to see whether I could.

The mass of a particular eagle is twice that of a hunted pigeon. Suppose the pigeon is flying north at ,2=17.1 m/s when the eagle swoops down, grabs the pigeon, and flies off. At the instant right before the attack, the eagle is flying toward the pigeon at an angle =52.7 ° below the horizontal and a speed of ,1=41.5 m/s.

Answers

Answer:

31.4 m/s

44.4°

Explanation:

Momentum is conserved in the horizontal direction:

pₓᵢ = pₓ

m vᵢ₂ + 2m vᵢ₁ cos θ = (m + 2m) vₓ

vᵢ₂ + 2 vᵢ₁ cos θ = 3 vₓ

17.1 m/s + 2 (41.5 m/s) (cos -52.7°) = 3 vₓ

vₓ = 22.5 m/s

Momentum is conserved in the vertical direction:

pᵧᵢ = pᵧ

2m vᵢ₁ sin θ = (m + 2m) vᵧ

2 vᵢ₁ sin θ = 3 vᵧ

2 (41.5 m/s) (sin -52.7°) = 3 vᵧ

vᵧ = -22.0 m/s

The speed is:

v = √(vₓ² + vᵧ²)

v = √((22.5 m/s)² + (-22.0 m/s)²)

v = 31.4 m/s

The direction is:

θ = atan(vᵧ / vₓ)

θ = atan(-22.0 m/s / 22.5 m/s)

θ = -44.4°

The speed of the eagle at that instant is 31.4 m/s while it moves off in the direction of 44.4°.

Since momentum is conserved horizontally;

17.1 m/s + 2 (41.5 m/s) (cos -52.7°) = 3 vx

vx = 17.1 m/s + 2 (41.5 m/s) (cos -52.7°)/3

vx =  22.5 m/s

Also, momentum is conserved vertically hence;

2 (41.5 m/s) (sin -52.7°) = 3 vy

vy = 2 (41.5 m/s) (sin -52.7°) /3

vy =  -22.0 m/s

The effective speed therefore, is;

v = √((22.5 m/s)² + (-22.0 m/s)²)

v = 31.4 m/s

The direction of this effective speed is;

θ = tan-1(22.0 m/s / 22.5 m/s)

θ = 44.4°

Learn more: https://brainly.com/question/13322477

An aluminium pot whose thermal conductivity is 237 W/m.K has a flat, circular bottom

with diameter 15 cm and thickness 0.4 cm. Heat is transferred steadily to boiling water in

the pot through its bottom at a rate of 1400 W. If the inner surface of the bottom of the pot

is at 105 °C, determine the temperature at the outer surface of the bottom of the pot

Answers

Answer:

T₁ = 378.33 k = 105.33°C

Explanation:

From Fourier's Law of heat conduction, we know that:

Q = - KAΔT/t

where,

Q = Heat Transfer Rate = 1400 W

K = Thermal Conductivity of Material (Aluminum) = 237 W/m.k

A =Surface Area through which heat transfer is taking place=circular bottom

A = π(radius)² = π(0.15 m)² =  0.0707 m²

ΔT = Difference in Temperature of both sides of surface = T₂ - T₁

T₁ = Temperature of outer surface = ?

T₂ = Temperature of inner surface = 105°C + 273 = 378 k

ΔT = 388 k - T₁

t = thickness of the surface (Bottom of Pot) = 0.4 cm = 0.004 m

Therefore,

1400 W = - (237 W/m.k)(0.0707 m²)(378 k - T₁)/0.004 m

(1400 W)/(4188.14 W/k) = - (378 k - T₁)

T₁ = 0.33 k + 378 k

T₁ = 378.33 k = 105.33°C

The motion of an object undergoing constant acceleration can be modeled by the kinematic equations. One such equation is xf=xi+vit+12at2 where xf is the final position, xi is the initial position, vi is the initial velocity, a is the acceleration, and t is the time. Let's say a car starts with an initial speed of 15 m/s, and moves between the 1000 m and 5000 m marks on a roadway in a time of 60 s. What is its acceleration?

Answers

Answer:

a = 1.72 m/s²

Explanation:

The given kinematic equation is the 2nd equation of motion. The equation is as follows:

xf = xi + (Vi)(t) + (1/2)(a)t²

where,

xf = the final position =  5000 m

xi = the initial position = 1000 m

Vi = the initial velocity = 15 m/s

t = the time taken = 60 s

a = acceleration = ?

Therefore,

5000 m = 1000 m + (15 m/s)(60 s) + (1/2)(a)(60 s)²

5000 m = 1000 m + 900 m + a(1800 s²)

5000 m = 1900 m + a(1800 s²)

5000 m - 1900 m = a(1800 s²)

a(1800 s²) = 3100 m

a = 3100 m/1800 s²

a = 1.72 m/s²

When an electromagnetic wave falls on a white, perfectly reflectingsurface, it exerts a force F on that surface. If the surfaceis now painted a perfectly absorbing black, the force that the samewave would exert on the surface is:___________.
A) F
B) F/2
C) F/4
D) 2F
E) 4F

Answers

Answer:

B. F/2

Explanation:

The radiation force per unit area (radiation pressure Prad) exerted by an electromagnetic wave on a perfectly absorbing body has been found by experiment to be equal to the energy density of the wave

i.e Prad = u

For a reflecting body, this force exerted per unit area has been found to be twice the energy density of the wave.

i.e Prad = 2u.

Therefore, if the force exerted on a perfectly reflective body is F, then the force exerted on a perfectly absorbing body will be F/2

Leah is moving in a spaceship at a constant velocity away from a group of stars. Which one of the following statements indicates a method by which she can determine her absolute velocity through space?
A) She can measure her increases in mass.
B) She can measure the contraction of her ship.
C) She can measure the vibration frequency of a quartz crystal.
D) She can measure the changes in total energy of her ship.
E) She can perform no measurement to determine this quantity.

Answers

Answer:

E) She can perform no measurement to determine this quantity.

Explanation:

A spacecraft is a machine used to fly in outer space.

According to Isaac Newton's third law of motion, every action produces an equal and opposite reaction. When fuel is shoot out of one end of the rocket, the rocket moves forward for which no air is required.

As Leah is moving in a spaceship at a constant velocity away from a group of stars, she cannot measure to determine this quantity.

What is the answer for this question

Answers

ANSWER: My sister, who is a waitress at Billy’s Big Burger Shack, is sixteen years old.
The correct is c. If you need help with more questions you can dm me

In Physics lab, a lab team places a cart on one of the horizontal, linear tracks with a fan attached to it. The cart is positioned at one end of the track, and the fan is turned on. Starting from rest, the cart takes 4.34 s to travel a distance of 1.62 m. The mass of the cart plus fan is 354 g. Assume that the cart travels with constant acceleration.
A) What is the net force exerted on the cart-fan combination?B) Mass is added to the cart until the total mass of the cart-fan combination is 762 g, and the experiment is repeated. How long does it take for the cart, starting from rest, to travel 1.62 m now?

Answers

Answer:

A. F = 0.06 N

B. t = 6.37 s

Explanation:

A)

First we need to find the constant acceleration of the cart. For this purpose, we use 2nd equation of motion:

s = (Vi)(t) + (0.5)at²

where,

s = distance traveled = 1.62 m

Vi = 0 m/s   (Since, it starts from rest)

t = Time Taken = 4.34 s

a = acceleration = ?

Therefore,

1.62 m = (0 m/s)(4.34 s) + (0.5)(a)(4.34 s)²

1.62 m/9.4178 s² = a

a = 0.172 m/s²

Now, from Newton's Second law, we know that:

F = ma

where,

F = Net Force of the combination = ?

m = Mass pf combination = 354 g = 0.354 kg

Therefore,

F = (0.354 kg)(0.172 m/s²)

F = 0.06 N

B)

Now, for the same force, but changed mass = 762 g = 0.762 kg, we have the acceleration to be:

F = ma

a = F/m

a = 0.06 N/0.762 kg

a = 0.08 m/s²

Now, using  2nd equation of motion:

s = (Vi)(t) + (0.5)at²

1.62 m = (0 m/s)(t) + (0.5)(0.08 m/s²)t²

t² = 1.62 m/(0.04 m/s²)

t = √40.54 s²

t = 6.37 s

Two hockey pucks, labeled A and B, are initially at rest on a smooth ice surface and are separated by a distance of 18.0 m . Simultaneously, each puck is given a quick push, and they begin to slide directly toward each other. Puck A moves with a speed of 3.90 m/s , and puck B moves with a speed of 4.30 m/s . What is the distance covered by puck A by the time the two pucks collide

Answers

Answer:

The distance covered by puck A before collision is  [tex]z = 8.56 \ m[/tex]

Explanation:

From the question we are told that

   The label on the two hockey pucks is  A and  B

    The distance between the  two hockey pucks is D   18.0 m

     The speed of puck A is  [tex]v_A = 3.90 \ m/s[/tex]

        The speed of puck B is  [tex]v_B = 4.30 \ m/s[/tex]

The distance covered by puck A is mathematically represented as

     [tex]z = v_A * t[/tex]

  =>  [tex]t = \frac{z}{v_A}[/tex]

 The distance covered by puck B  is  mathematically represented as

      [tex]18 - z = v_B * t[/tex]

=>   [tex]t = \frac{18 - z}{v_B}[/tex]

Since the time take before collision is the same

        [tex]\frac{18 - z}{V_B} = \frac{z}{v_A}[/tex]

substituting values

          [tex]\frac{18 -z }{4.3} = \frac{z}{3.90}[/tex]

=>      [tex]70.2 - 3.90 z = 4.3 z[/tex]

=>       [tex]z = 8.56 \ m[/tex]

Other Questions
Mr. Azu invested an amount at rate of 12% per annum and invested another amount, GH 580.00 more than the first at 14%. If Mr. Azu had total accumulated amount of GH2,358.60, how much was his total investment? Compare and contrast the Angle Angle Similanty Postulate, the Side Side Side Similarity Theorem and the Side AngleSide Similanty TheoremWrite about the similantes and the differences that you observe.? What is this angle ? A.It is an adjacent angle. B.It is a right angle. C.It is a vertical angle. D.It is a supplementary angle. A local government awards a landscaping company a contract worth $1.5 million per year for five years for maintaining public parks. The landscaping company will need to buy some new machinery before they can take on the contract. If the cost of capital is 6%, what is the most that this equipment could cost if the contract is to be worthwhile for the landscaping company Please does know the answer What is a thesis statement?A. a statement of purpose b. statement of factC. an observation related to the workD. a neutral point with minimum scope for debate I need to know this problem cause I need to finish summer school Needed ASAPThe point where the lever rocks back and forth is called _______ or ________ A5.3 1012 kg satellite is 1,800 m from another satellite that has a mass of 3.5 x 108 kg. What is the gravitationalforce between the satellites?3.82 x 104N6.87 x 107 N5.72 x 1014 N0 1.03 x 1018 N what describes the reason for the seven years war in north america 2f(6)7g(7) = ? Whats the correct answer for this? Select all that apply HELP FAST 32 as a mixed radical An object has a mass of 35.0 grams. On Anthonys balance, it weighs 38.5 grams. What is the percent error of his balance? Find the slope of a linear function passes through the points (3,2) and (-4,1) Also assume that a U.S. exporter denominates its Swiss exports in Swiss francs and expects to receive SF250,000 in 1 year. Using the information above, what will be the approximate value of these exports in 1 year in U.S. dollars given that the firm executes a forward hedge Jeremy is driving to his friends house that is 60 miles away from his home the scale on Jeremy's map is 1 1/2 inches equivalent to 9 miles how far is it on the map from jeremys house to his friends? (a + b)(a2 ab + b2) = a3 + b3 what is the absolute value of l 10 - 11 l = Describe the plot of the first chapter of the great gatsby. In your description, include how the setting affects the plot. Use examples from the text to support your description