When is the change of in enthalpy when 77. 2 grams of steam at 100c is converted liquid water at the same temperature and temperature?

Te freezing point of the solution containing 1.25 g of benzene in 100.0 g of chloroform is approximately -64.249 °C.

Mass of benzene (C₆H₆) = 1.25 g

Molar mass of benzene (C₆H₆) = 78.11 g/mol

Mass of chloroform (solvent) = 100.0 g

Mass of chloroform (solvent) in kilograms = 100.0 g / 1000 = 0.1 kg

Number of moles of benzene = 1.25 g / 78.11 g/mol = 0.016 mol

Molality (moles of solute per kilogram of solvent) = 0.016 mol / 0.1 kg = 0.16 mol/kg (or 0.16 m)

To calculate the freezing point depression, we need the freezing point depression constant (K_f) for chloroform. Let's assume the K_f value for chloroform is 4.68 °C/m.

ΔT = K_f * m

ΔT = 4.68 °C/m * 0.16 m = 0.749 °C

Now, we can calculate the freezing point of the solution:

Freezing point of pure chloroform = -63.5 °C (assumed value)

Freezing point of the solution = Freezing point of pure chloroform - ΔT

Freezing point of the solution = -63.5 °C - 0.749 °C = -64.249 °C

learn more about Freezing point here:

https://brainly.com/question/3121416

#SPJ11

When radium (atomic number 88) emits an alpha particle, it loses two protons and two neutrons from its nucleus. This means that the resulting nucleus will have an atomic number that is two less than the original radium nucleus, which would be 86.

This new element with atomic number 86 is called radon. Radon is a radioactive gas that is odorless, colorless, and tasteless. It is a naturally occurring element that can be found in soil, water, and rocks. Radon gas is known to cause lung cancer when inhaled over long periods of time, so it is important to test for and mitigate high levels of radon in homes and buildings.

To learn more about number click here: brainly.com/question/3589540

#SPJ11

The correct statements about the standard enthalpy of formation of a compound are:  b. It is calculated when all substances are in their respective states at STP.  d. It is the enthalpy change accompanying the formation of 1 mole of the compound.

Option a is incorrect because the substances can be in any state, not just gaseous. Option c is also incorrect because the enthalpy change is for the formation of 1 mole, not 1 gram of the compound. The standard enthalpy of formation is the enthalpy change that occurs when 1 mole of a compound is formed from its constituent elements in their standard states at a given temperature and pressure (usually at 25°C and 1 atm pressure). This value is important in determining the energy released or absorbed during a chemical reaction and is used in many thermodynamic calculations.

The standard enthalpy of formation of a compound refers to the energy change associated with the formation of a substance from its constituent elements. Among the provided statements, the true ones are:

b. It is calculated when all substances are in their respective states at standard temperature and pressure (STP).

d. It is the enthalpy change accompanying the formation of 1 mole of the compound.

These conditions help maintain consistency when comparing enthalpy values for various compounds, aiding in understanding their stability and potential chemical reactions.

learn more about the Enthalpy here

https://brainly.com/question/29145818

#SPJ11

The new pressure of the gas is 0.101 atm. This makes sense since the gas expanded to a larger volume, so the pressure decreased proportionally.

To find the new pressure of the gas, we can use the ideal gas law, which states that PV = nRT. Since the temperature is constant, we can set up a proportion between the initial and final volumes and pressures:

P1V1 = P2V2

Where P1 = 0.854 atm, V1 = 25.0 mL, and V2 = 210 mL. Solving for P2:

P2 = P1(V1/V2) = 0.854 atm * (25.0 mL/210 mL) = 0.101 atm

Therefore, the new pressure of the gas is 0.101 atm. This makes sense since the gas expanded to a larger volume, so the pressure decreased proportionally.

To know about pressure  :

https://brainly.com/question/30673967

#SPJ11

If a reaction has ΔH > 0 and ΔS > 0, it will be spontaneous at high temperatures (option d).

The spontaneity of a reaction is determined by the change in free energy, ΔG, which is given by the equation ΔG = ΔH - TΔS, where T is the temperature in Kelvin. If ΔG is negative, the reaction is spontaneous, and if it is positive, the reaction is nonspontaneous.

In the case where ΔH > 0 and ΔS > 0, the positive value of ΔH indicates that the reaction is endothermic, meaning that energy is absorbed from the surroundings. The positive value of ΔS indicates that the disorder or randomness of the system has increased.

At high temperatures, the TΔS term will dominate the ΔH term, resulting in a negative ΔG value and a spontaneous reaction. This is because the increase in temperature favors the increase in entropy, making the system more disordered, and thus, the reaction becomes more favorable.

However, at low temperatures, the ΔH term will dominate, resulting in a positive ΔG value and a nonspontaneous reaction. Therefore, the correct answer is option d, which states that the reaction is spontaneous at high temperatures.

Visit here to learn more about Energy:

brainly.com/question/13881533

#SPJ11

The geometry lets the dipoles cancel out.A molecule can be nonpolar even if the bonds are polar if the polar bonds are arranged symmetrically

Around the central atom, and the geometry of the molecule allows the dipoles to cancel out. This means that the partial positive and partial negative charges in the molecule are distributed evenly, resulting in a molecule with no overall dipole moment. For example, carbon dioxide (CO2) has two polar covalent bonds between carbon and oxygen, but the molecule is linear and symmetrical, which allows the dipoles to cancel out, resulting in a nonpolar molecule.

To know more about molecule visit :

https://brainly.com/question/30465503

#SPJ11

Answer:

False

Explanation:

#Everything4Zalo

The expected boiling point of a brine solution containing 30.00 g of KBr dissolved in 100.00 g of water is 102.62⁰C

The boiling point of a liquid is the temperature at which the vapour pressure of the liquid becomes equal to the atmospheric pressure of the liquid’s environment. At this temperature, the liquid is converted into a vapour.

The phenomenon of boiling is pressure dependent and hence, the Boiling Point of a liquid may change depending upon the surrounding pressure.

Given,

Mass of brine = 30g

Mass of water = 100g

Moles of brine = 30/ 119 = 0.252 moles

Molality = number of moles of glucose / mass of water in kg

= 0.252 / 0.1

= 2.52 molal

Elevation in boiling point = Kb × molality

= 0.52 × 2 × 2.52

= 2.62K

Boiling point of pure water = 100⁰C

Boiling point of brine = 100 + 2.62

= 102.62 ⁰C

Learn more about Boiling Point, here:

https://brainly.com/question/2153588

#SPJ1

At 25°C, the equilibrium constant K for the reaction between Cl2(g) and Br-(aq) is very large and it can be considered to be effectively infinite (i.e., K ≈ ∞).  

The equilibrium constant, K, for the reaction between Cl2(g) and Br-(aq) can be determined by writing the balanced chemical equation and using the concentrations of the reactants and products at equilibrium. The balanced chemical equation for the reaction is:

Cl2(g) + 2Br-(aq) ⇌ 2Cl-(aq) + Br2(l)

The equilibrium expression for this reaction is:

K = [Cl-]2[Br2]/[Br-]2[Cl2]

The value of K depends on the concentrations of the reactants and products at equilibrium. At 25°C, the standard reduction potential for the Br2(l)/Br-(aq) half-reaction is +1.09 V, while the standard reduction potential for the Cl2(g)/Cl-(aq) half-reaction is +1.36 V. Since the reduction potential for Cl2 is greater than that for Br2, Cl2 will oxidize Br- to form Cl- and Br2, and the equilibrium constant K will be much greater than 1.

Therefore, at 25°C, the equilibrium constant K for the reaction between Cl2(g) and Br-(aq) is very large and it can be considered to be effectively infinite (i.e., K ≈ ∞).  

Learn more about constant here:

https://brainly.com/question/14279790

#SPJ11

The root-mean-square (rms) velocity of methane molecules at 60°C is approximately 1257 m/s.

The rms velocity is a measure of the average velocity of gas particles in a sample, taking into account their distribution of speeds. It is calculated using the formula:

v(rms) = sqrt(3RT/M)

where R is the gas constant, T is the temperature in Kelvin, and M is the molar mass of the gas. For methane (CH4), the molar mass is approximately 16.04 g/mol.

To solve for v(rms) at 60°C (which is 333 K), we plug in the values and get:

v(rms) = sqrt(3 x 8.314 J/mol-K x 333 K / 0.01604 kg/mol)

v(rms) ≈ 1257 m/s

Therefore, at 60°C, the root-mean-square velocity of methane molecules is approximately 1257 m/s. It is important to note that this is an average value, and individual molecules in the sample will have varying velocities.

Visit here to learn more about  velocity:

brainly.com/question/80295

#SPJ11

Answer: C. H3PO4 (aq)

Explanation:

A Brønsted-Lowry acid is a proton (H+) donor. H3PO4 loses a proton and creates the conjugate base H2PO4^2- (aq).

Jeff can conclude that the specific heat capacity of water is higher than that of vegetable oil. This has practical implications in many fields, such as cooking, where the specific heat capacity of different ingredients can affect cooking times and temperatures.

Jeff's experiment shows that the vegetable oil has a lower specific heat capacity than water. Specific heat capacity is the amount of heat energy required to raise the temperature of a substance by one degree Celsius. In this case, the oil's temperature increased more than the water's temperature after being heated for the same amount of time, which means the oil required less heat energy than water to increase its temperature by the same amount. This difference in specific heat capacity is due to the molecular structure of water and vegetable oil. Water has a high specific heat capacity because it has strong hydrogen bonds between its molecules, which require a lot of energy to break. Vegetable oil, on the other hand, is made up of long chains of hydrocarbons that do not have strong intermolecular forces, so they require less energy to be heated.

for more questions on heat

https://brainly.com/question/30738335

#SPJ11

Answer: [tex]14 H^+ + Cr_2O_7^{2-} + 6 Cl^- - > 2 Cr^{3+} + 3 Cl_2 + 7 H_2O[/tex]

Explanation:

First, figure out what is oxidized and reduced in the reaction.

The Cl- is oxidized into Cl2 because Cl in Cl- has oxidation state of -1 and Cl in Cl2 has oxidation state of 0.

Oxygen almost always has oxidation state of -2, so oxidation state of Cr in dichromate is 2x + 7*-2 = -2, where oxidation of Cr is x. Solving the equation gives 2x - 14 = -2, then 2x = 12, then x = 6, so Cr has oxidation state of +6 in dichromate. Since Cr3+ has oxidation state of +3, Cr is reduced.

Split redox reaction into two half reactions, one reaction will have oxidation and the other will have reduction. The following half reactions are shown below:

Reduction: [tex]Cr_2O_7^{2-} - > Cr^{3+}[/tex]

Oxidation: [tex]Cl^- - > Cl_2[/tex]

Balance the Cr and Cl atoms in the half reactions:

Reduction: [tex]Cr_2O_7^{2-} - > 2Cr^{3+}[/tex]

Oxidation: [tex]2 Cl^- - > Cl_2[/tex]

Balance the number of oxygen atoms in the half reactions using water:

Reduction: [tex]Cr_2O_7^{2-} - > 2Cr^{3+} + 7H_2O[/tex]

Oxidation: [tex]2 Cl^- - > Cl_2[/tex]

Balance the number of hydrogen atoms in the half reactions using H+ because the redox reaction takes place in an acidic solution:

Reduction: [tex]14H^+ + Cr_2O_7^{2-} - > 2Cr^{3+} + 7H_2O[/tex]

Oxidation: [tex]2 Cl^- - > Cl_2[/tex]

Balance the charges in the half reaction using electrons:

Reduction: [tex]6e^- + 14H^+ + Cr_2O_7^{2-} - > 2Cr^{3+} + 7H_2O[/tex]

Oxidation: [tex]2 Cl^- - > Cl_2 + 2e^-[/tex]

To combine the balanced half reactions, the number of free electrons produced through oxidation must equal the number of free electrons used up through reduction. This is done by multiplying the half reactions by different amounts:

Reduction: [tex]6e^- + 14H^+ + Cr_2O_7^{2-} - > 2Cr^{3+} + 7H_2O[/tex]

Oxidation: [tex]6 Cl^- - > 3Cl_2 + 6e^-[/tex]

Now when the balanced half reactions are combined, the electrons on both sides will cancel out, giving us the fully balanced redox reaction:

[tex]14 H^+ + Cr_2O_7^{2-} + 6 Cl^- - > 2 Cr^{3+} + 3 Cl_2 + 7 H_2O[/tex]

This way of balancing redox reactions is called the ion-electron method. I would recommend googling it and learning it well. Redox reactions in basic solutions have one or two extra steps compared to acidic solutions.

The quantity of heat needed to raise the temperature of 1 gram of a substance by 1 degree Celsius is called specific heat capacity. It is also known as specific heat or specific heat capacity at constant pressure. Specific heat is a physical property of a substance and it represents the amount of heat energy required to raise the temperature of a given mass of a substance by one degree Celsius. Specific heat is usually measured in units of J/g·°C or cal/g·°C.

The specific energy of a substance depends on its internal structure, composition, and phase. Different substances have different specific heats, and even different phases of the same substance can have different specific heats. Knowing the specific heat of a substance is important for many practical applications, including designing and optimizing industrial processes, calculating the energy requirements for heating and cooling systems, and understanding the behavior of materials under extreme conditions, such as high temperatures or pressures.

To learn more about energy click here: brainly.com/question/12001116

#SPJ11

For the first question, the minimum concentration of the precipitating agent can be calculated using the solubility product constant (Ksp) of the precipitate. In this case, barium fluoride is the precipitate and its Ksp is 2.45x10^-5. Using the stoichiometry of the balanced equation, the concentration of fluoride ions needed to reach the Ksp of barium fluoride can be calculated. The minimum concentration of the precipitating agent, in this case, sodium fluoride (NaF), would be equal to this concentration.

For the second question, we can use the concept of selective precipitation to determine the percentage of the first ion that remains in solution. The Ksp values of lithium carbonate (Li2CO3) and lithium fluoride (LiF) are given as 8.2x10^-4 and 1.8x10^-3 respectively. Comparing the ion product (Qsp) of each salt to its Ksp will determine which salt will precipitate first. The ion product is calculated by multiplying the molar concentrations of the ions in the solution. Once the point of precipitation for the second ion is reached, the percentage of the first ion remaining in solution can be calculated by comparing its ion product with its Ksp.

To learn more about solution click here: brainly.com/question/1616939

#SPJ11

4, since there are four gases (Cl2, NO2, O2, and SF6) with densities greater than that of argon.

We need to compare the densities of each gas to that of argon, which is 1.78 g/L at STP (standard temperature and pressure). Let's take a look at each gas:
- Cl2: The molar mass of Cl2 is 71 g/mol, so its density at STP would be 71 g/L (since 1 mole of any gas at STP occupies 22.4 L). Therefore, Cl2 has a density greater than that of argon, so the answer is at least 1.
- He: Helium has a molar mass of 4 g/mol, so its density at STP is 0.178 g/L. This is less than the density of argon, so He is not one of the gases with a density greater than argon.
- NH3: The molar mass of NH3 is 17 g/mol, so its density at STP is approximately 0.76 g/L. This is less than the density of argon, so NH3 is not one of the gases with a density greater than argon.
- NO2: The molar mass of NO2 is 46 g/mol, so its density at STP would be approximately 2.05 g/L. This is greater than the density of argon, so NO2 is one of the gases with a density greater than argon.
So far, we have found that Cl2 and NO2 have densities greater than that of argon. Let's look at the last gas:
- O2: The molar mass of O2 is 32 g/mol, so its density at STP would be approximately 1.43 g/L. This is greater than the density of argon, so O2 is one of the gases with a density greater than argon.
Therefore, the answer is E) 4, since there are four gases (Cl2, NO2, O2, and SF6) with densities greater than that of argon.

To know more about Argon visit:

https://brainly.com/question/12032224

#SPJ11

Yes, a precipitate forms in the newly mixed solution containing lead(II) nitrate (Pb(NO3)2) and sodium bromide (NaBr).

To determine if a precipitate will form in the newly mixed solution, we need to calculate the solubility product constant (Ksp) of lead(ii) bromide (PbBr2), which is the compound that could potentially form a precipitate.

First, we write the balanced chemical equation for the reaction: Pb(NO3)2 + 2NaBr → PbBr2 + 2NaNO3

From this equation, we can see that 1 mole of Pb(NO3)2 will react with 2 moles of NaBr to form 1 mole of PbBr2.

Using the concentrations given in the problem, we can calculate the molar solubility of PbBr2:

[Pb2+] = 2 x 0.0150 M = 0.0300 M
[Br-] = 2 x 0.00350 M = 0.00700 M

Ksp = [Pb2+][Br-]^2 = (0.0300)(0.00700)^2 = 1.47 x 10^-6

The Ksp for PbBr2 is 1.47 x 10^-6, which is smaller than the product of the concentrations of Pb2+ and Br- in the newly mixed solution. Therefore, a precipitate of PbBr2 will form in the solution.
Yes, a precipitate forms in the newly mixed solution containing lead(II) nitrate (Pb(NO3)2) and sodium bromide (NaBr).

To know about precipitate:

https://brainly.com/question/31141813

#SPJ11

There are many methods for removing oil from water, including physical, chemical, and biological processes. Each solution has its advantages and disadvantages, and the most effective method depends on the specific context and the goals of the treatment.

Some physical methods for removing oil from water include skimming, absorption, and filtration. Skimming involves using a physical barrier, such as a screen or boom, to trap the oil and then remove it. Absorption uses materials that can soak up the oil, such as activated carbon or clay. Filtration can remove oil particles from the water by passing it through a filter medium.

Chemical methods, such as coagulation and flocculation, involve adding chemicals to the water to cause the oil to clump together, making it easier to remove. Biological methods, such as bioremediation, use microorganisms to break down the oil.

In terms of effectiveness, it's difficult to say which method works best as it depends on the specific circumstances. It is possible to combine or modify the solutions to develop a better method for removing oil from water.

The Question was Incomplete, Find the full content below :

Consider a problem where you need to remove oil from water. You and your team have come up with several potential solutions, including skimming, using absorbent materials, and applying heat. You decide to test each solution to see which works best. After testing, you have collected data on the effectiveness of each method. Consider the results of each solution. Did any one solution work best? Could you combine or modify the solutions to develop a better method for removing the oil from the water?

Know more about coagulation here:

https://brainly.com/question/30711265

#SPJ11  

Answer:

Ta(Tantalum) has a higher atomic radius than V(vanadium).

Explanation:

Ta(Tantalum) has more electrons and energy levels, so its atomic radius is large. Ta(Tantalum) is located further down and left to the periodic table than V(Vanadium) as the atomic radius generally increases down a group from right to left across a period.

Vanadium has an atomic number of 23 and whereas Tantalum has an atomic number of 73.

An atom must fill its outermost electron shell with the maximum number of electrons possible to achieve maximum stability and become chemically inert.

Atoms seek to achieve a stable electron configuration by filling their outermost electron shell with the maximum number of electrons possible. This is known as the octet rule, which states that atoms tend to gain, lose, or share electrons in order to achieve a full valence shell of eight electrons.

Noble gases, such as helium, neon, and argon, are examples of chemically inert elements as they have a full outermost electron shell and do not readily react with other elements. Elements in the same group on the periodic table tend to have similar chemical properties because they have the same number of valence electrons. Achieving a stable electron configuration is crucial for the formation of chemical bonds, which allow atoms to combine and form molecules.

Learn more about octet rule here:

https://brainly.com/question/30779148

#SPJ11

For an atom to achieve maximum stability and become chemically inert, it must achieve a filled outer electron shell. This can be accomplished through one of the following processes:

Gaining or losing electrons: Atoms can gain or lose electrons to achieve a filled outer shell, either by accepting electrons from other atoms (to become negatively charged ions) or by donating electrons to other atoms (to become positively charged ions).Sharing electrons: Atoms can form covalent bonds by sharing electrons with other atoms. This allows each atom to have a complete outer shell by sharing electrons with neighboring atoms.By achieving a filled outer electron shell, atoms can attain a stable electron configuration similar to that of the noble gases, which are known for their chemical inertness.

To learn more about  atom

brainly.com/question/1566330

#SPJ4

The binding energy per nucleon for silver-109 is 1.285 × 10⁻¹¹ kJ/mol.

In order to calculate the binding energy per nucleon, which is expressed in units of energy per mole of nuclei (kJ/mol), we need to use the following equation:

BE/A = (Δmc²)/A

where BE/A is the binding energy per nucleon, Δm is the mass defect (the difference between the actual mass of the nucleus and the sum of the masses of its constituent nucleons), c is the speed of light, and A is the mass number (the total number of protons and neutrons) of the nucleus.

The atomic mass of silver-109 is 108.90585 g/mol, so its mass number is 109. We also have the required masses of its constituent nucleons, which are 47 for protons and 62 for neutrons.

Using the atomic masses of silver-109 and its constituent nucleons, we can calculate the mass defect as follows:

Δm = (108.90585 g/mol - (47 × 1.007825 g/mol + 62 × 1.008665 g/mol)) = 0.008601 g/mol

where 47 and 62 are the numbers of protons and neutrons in the nucleus, respectively.

Converting the mass defect to energy using Einstein's famous equation E = mc² we get:

ΔE = Δmc² = (0.008601 g/mol) × (299792458 m/s)² = 7.732 × 10⁻⁴ J/mol

Finally, we convert the energy per nucleus to energy per mole of nuclei and then to kilojoules per mole by dividing by the Avogadro constant and multiplying by 10⁻³:

BE/A = ΔE/A × N_A × 10⁻³ = (7.732 × 10⁻⁴ J/mol)/(6.022 × 10²³ mol⁻¹) × 10⁻³ = 1.285 × 10⁻¹¹kJ/mol

Therefore, the binding energy per nucleon for silver-109 is 1.285 × 10⁻¹¹kJ/mol.

To learn more about binding energy here

https://brainly.com/question/32066931

#SPJ4

In the given scenario, a 25.00 ml sample of 2.000 M KOH is mixed with 50.00 ml of 2.000 M HCl in a coffee-cup calorimeter. By comparing the moles of each reactant, we can determine that KOH is the limiting reactant, and HCl is in excess.

The enthalpy of the reaction is -55.8 kJ. To calculate the final temperature of the reaction mixture, we can use the heat transfer equation. Assuming no heat loss to the surroundings, the density of all solutions is 1.00 g/ml, and the volumes are additive.

Comparing the moles of KOH and HCl, we find that KOH is the limiting reactant as it has fewer moles. The balanced chemical equation suggests a 1:1 stoichiometric ratio between KOH and HCl. The enthalpy of the reaction, -55.8 kJ, corresponds to the heat transferred. Using the heat transfer equation, we can calculate the final temperature. Assuming the specific heat capacity of the solution is approximately 4.18 J/g°C and the total mass is 75.00 g (25.00 g + 50.00 g), we substitute the values into the equation: -55,800 J = (75.00 g) * (4.18 J/g°C) * (ΔT). Solving for ΔT gives us the final temperature of the reaction mixture.

To learn more about stoichiometric click here brainly.com/question/6907332

#SPJ11

The amount of heat to be removed to change 25 grams pf water vapor at 125 C to ice at -10 is 1182.5 J.

The process of changing water vapor at 125°C to ice at -10°C involves two steps:

Step 1: Cooling water vapor at 125°C to liquid water at 100°C

The amount of heat to be removed can be calculated using the formula:

Q = m × c × ΔT

where Q is the heat energy, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

The mass of water vapor is not given, so we cannot calculate the heat required to cool it to 100°C.

However, we know that the water vapor will condense into liquid water at 100°C, and the heat of vaporization will be released.

Step 2: Removing heat of vaporization to convert liquid water at 100°C to ice at -10°C

The amount of heat to be removed can be calculated using the formula:

Q = m × ΔHf + m × c × ΔT

where Q is the heat energy, m is the mass, ΔHf is the heat of fusion, c is the specific heat capacity, and ΔT is the change in temperature.

Given:

Mass of water vapor = 25 g

Initial temperature of water vapor = 125°C

Temperature of ice = -10°C

Heat of fusion of water = 334 J/g

Specific heat capacity of water = 4.18 J/(g·°C)

Step 1:

The water vapor will condense into liquid water at 100°C, releasing heat of vaporization:

Q1 = 25 g × 40.7 J/g = 1017.5 J

Step 2:

The liquid water at 100°C must be cooled to 0°C, then frozen to ice at -10°C:

Q2 = (25 g × 4.18 J/(g·°C) × (0°C - 100°C)) + (25 g × 334 J/g)

Q2 = -10,550 J + 8350 J = -2200 J

The total amount of heat to be removed is the sum of Q1 and Q2:

Qtotal = Q1 + Q2 = 1017.5 J - 2200 J = -1182.5 J

Therefore, 1182.5 J of heat must be removed to change 25 grams of water vapor at 125°C to ice at -10°C.

For more details regarding vaporization, visit:

https://brainly.com/question/11651433

#SPJ1

It will take 8 years for Joe to weigh the same as Kevin.

Let's assume "y" represents the number of years it will take for Joe to weigh the same as Kevin. After "y" years, Joe's weight would be 90 + 10y pounds, and Kevin's weight would be 110 + 6y pounds. To find the number of years it takes for Joe to weigh the same as Kevin, we set up the equation:

90 + 10y = 110 + 6y

By rearranging the equation, we can solve for "y":

10y - 6y = 110 - 90

4y = 20

y = 5

Therefore, it will take 5 years for Joe's weight to catch up to Kevin's weight. After 5 years, Joe's weight will be 90 + 10(5) = 140 pounds, and Kevin's weight will be 110 + 6(5) = 140 pounds. Hence, after 8 years, both Joe and Kevin will weigh the same, at 140 pounds.

Learn more about Joe here:

https://brainly.com/question/17001929

#SPJ11

The second option is not true of standard reduction potential. In the standard hydrogen electrode, electrons on the surface of the electrode combine with H+ ions in solution to produce hydrogen gas.

The third option is also not true as in the standard hydrogen electrode, hydrogen gas is reduced to H+ ions. The first option is true for standard reduction potential. The fourth option is also true as the standard hydrogen electrode has a reduction potential of exactly 0 V. Standard reduction potential is a measure of the tendency of a chemical species to acquire electrons and undergo reduction. It is measured relative to the standard hydrogen electrode.

The statement that is not true of standard reduction potential is: "In the standard hydrogen electrode, liquid hydrogen is combined with 1 M NaCl solution." The standard hydrogen electrode (SHE) uses a solution of HCl or other strong acid with H+ ions, not NaCl. The SHE serves as a reference electrode with a reduction potential of exactly 0 V, where hydrogen gas is oxidized to H+ ions, and electrons on the electrode's surface combine with H+ ions in the solution to produce hydrogen gas.

To know about electrode visit:

https://brainly.com/question/29667817

#SPJ11

The correct option is d. XeF4, which has a squareplanar molecule structure.

VSEPR (Valence Shell Electron Pair Repulsion) theory predicts the three-dimensional structure of molecules based on the repulsion between electron pairs in the valence shell of an atom.

According to VSEPR theory, the electron pairs around the central atom will position themselves as far apart as possible to minimize repulsion. This gives rise to different molecular geometries like linear, trigonal planar, tetrahedral, trigonal bipyramidal, and octahedral.

In the case of XeF4, the central xenon atom has four fluorine atoms bonded to it. Two of these are arranged in a plane above the atom, and the other two are arranged below the atom in the same plane.

The molecule thus has a square planar geometry. The other options, TeBr4, BrF3, IF5, and SCl2 have different molecular geometries.

Visit here to learn more about Atom:

brainly.com/question/6258301

#SPJ11

In the reaction H2O + NH3 → OH- + NH4+, the molecule NH3 (ammonia) is acting as a base because it accepts a proton (H+) from H2O (water) to form NH4+ (ammonium ion).

Ammonia (NH3) is a colorless gas with a pungent odor. It is composed of one nitrogen atom and three hydrogen atoms and has a molecular weight of 17.03 g/mol. Ammonia is highly soluble in water and forms ammonium ions (NH4+) in aqueous solution, making it a weak base.

Ammonia is widely used in the production of fertilizers, explosives, and cleaning products. It is also used in refrigeration systems as a refrigerant and in the manufacturing of various chemicals, including nylon and plastics. Ammonia has a variety of industrial and agricultural applications due to its basic properties and high reactivity.

However, it can also be toxic at high concentrations and can cause respiratory problems if inhaled.

Visit here to learn more about ammonia brainly.com/question/29519032
#SPJ11

The given system consists of three energy levels: State 1 with an energy of 6.1 eV, State 2 with an energy of 6.2 eV, and State 3 with an energy of 6.4 eV. The system is in thermal equilibrium with a reservoir at a temperature of 937 K. The probability that the system is in State 1 is calculated to be approximately [tex]1.59e^{-33[/tex]. Option A is correct.

To calculate the probability that the system is in state 1, we can use the Boltzmann distribution. The probability of finding a system in a particular state is given by:

[tex]P(i) = \frac{e^{-\frac{E(i)}{kT}}}{Z}[/tex]

where P(i) is the probability of the system being in state i, E(i) is the energy of state i, k is the Boltzmann constant ([tex]8.617333262145 \times 10^{-5} eV/K[/tex]), T is the temperature in Kelvin, and Z is the partition function.

The partition function Z is the sum of the exponential factors for all states:

[tex]Z = \sum e^{-\frac{E(i)}{kT}}[/tex]

Let's calculate the partition function first:

[tex]Z = e^{-\frac{6.1}{k \cdot 937}} + e^{-\frac{6.2}{k \cdot 937}} + e^{-\frac{6.4}{k \cdot 937}}[/tex]

Now we can calculate the probability of the system being in state 1:

[tex]P(1) = \frac{e^{-\frac{6.1}{k \cdot 937}}}{Z}[/tex]

Substituting the values and calculating:

[tex]P(1) = \frac{e^{-\frac{6.1}{8.617333262145 \times 10^{-5} \cdot 937}}}{Z}[/tex]

[tex]P(1) \approx 1.59 \times 10^{-33}[/tex]

To learn more about energy levels

https://brainly.com/question/30546209

#SPJ4

The balanced equation for the reaction of sodium thiosulfate and hydrochloric acid is:

Na₂S₂O₃ (aq) + 2HCl (aq) → 2NaCl (aq) + H₂O (l) + SO₂ (g) + S (s)

In this reaction, sodium thiosulfate (Na₂S₂O₃) reacts with hydrochloric acid (HCl) to produce sodium chloride (NaCl), water (H₂O), sulfur dioxide gas (SO₂) and sulfur (S) solid. To balance the equation, we need to ensure that there are equal numbers of atoms of each element on both sides of the arrow. The balanced equation shows that 1 mole of Na₂S₂O₃ reacts with 2 moles of HCl to produce 2 moles of NaCl, 1 mole of H₂O, 1 mole of SO₂ and 1 mole of S. The states of matter are also included in the balanced equation, with (aq) indicating an aqueous solution, (l) indicating liquid, and (g) indicating gas.

To know more about reaction visit :-

https://brainly.com/question/11231920

#SPJ11