when light strikes a window pane some rays will be reflected back and forth in between the two glass surfaces. why do these reflected rays not produce visible colored interference fringes?

The total area of tires in contact with the ground is [tex]17.36 cm^2[/tex] when mass of bicycle rider is 62 kg and pressure of tires is [tex]3.5*10^5 pascal[/tex]

Pressure is the amount of force exerted on surface per unit area. It can also be defined as the force-to-area ratio (over which the force is acting).

Given,

Mass of the bicycle rider = 62.0 kg

pressure in tires = [tex]3.50*10^5\ N/m^2[/tex] (1 pascal = 1 [tex]N/m^2[/tex])

From definition of pressure,

[tex]P=\frac{F}{A}.....i[/tex]

Where, p=pressure ,F= force applied and A= area perpendicular to force

Force can be determined by formula,

[tex]F=mg....ii[/tex]

Where, m= mass and g= gravitational acceleration=9.8m/s^2

substituting eq.ii in eq.i,

[tex]P=\frac{mg}{A}\\\\A=\frac{mg}{P}\\\\A=\frac{62*9.8}{3.5*10^5}\\\\A=\frac{607.6}{3.5*10^5}\\\\A=0.001736m^2=17.36cm^2[/tex]

Thus, the area of tires in contact with the ground is [tex]17.36 cm^2[/tex]

To learn more about pressure refer here

https://brainly.com/question/24179993

#SPJ4

When white light is passed through a glass prism it splits into its spectrum of colours (in order violet, indigo, blue, green, yellow, orange and red) and this process of white light splitting into its constituent colours is termed as dispersion.

To learn more about White light refer to:

https://brainly.com/question/2264818

#SPJ1

a) The altitude of these satellites above the Earth's surface is h = 3,588 10⁷ m ,  b) by the curve of the planet; consequently, the signals cannot reach these places

What is law of universal gravitation?

For this issue we must use the law of universal gravitation, with Newton's second law

     F = m a

     G m M / r² = m a         (1)

Centripetal acceleration

    a = v² / r

How the speed (speed) module is constant

    v = d / t

Circle the distance in a complete orbit with a time (T) called period

   d = 2π r

   v = 2π r / T

   a = (4π² r² / T²) / r

We substitute in equation 1

   G M / r² = 4π² r / T²

   G M / r³ = 4π² / T²

r = ∛ GM T² / 4π²

R is the distance from the center of the earth, the distance from the surface is

   R = Re + h

   Re + h = ∛ GM T²/ 4π²

   h = ∛(G M T²/4π²)   - Re

Let's reduce to SI units

  T = 1 day (24h / 1 day) (3600s / 1h)

  T = 86400 s

Let's calculate

  h = ∛ (6.67 10⁻¹¹ 5.98 10²⁴ (8.6400 10⁴)² / 4π²) - 6.37 10⁶

  h = ∛ (75.42 10²¹) - 6.37 10⁶

  h = 4,225 10⁷ - 0.637 10⁷

   h = 3,588 10⁷ m

b) In the attached you can see that for very large latitudes the linear path from the satellite to the earth is interrupted, by the curve of the planet; consequently, the signals cannot reach these places.

To learn more about Centripetal acceleration visit:https://brainly.com/question/14465119

#SPJ4

The value of mass m = 0.506kg

Initial frequency = 0.78Hz

additional mass =  730 g = 0.73kg

New frequency = 0.65 Hz

F = 1/2π [tex]\sqrt{x\\}k/m[/tex]

0.78 =  1/2π [tex]\sqrt{k/m}[/tex]

additional mass,

0.65 = 1/2π [tex]\sqrt{k/m+0.65}[/tex]

1.44 = k/m / k/m+0.73

1.44 = m+0.73 / m

1.44m -m = 0.73

1.44m = 0.73

mass m = 0.506kg

a measurement used in physics to express the inertia, a quality that all matter has in common. Effectively, it is the resistance a body of matter offers to a change in its speed or position as a result of the application of a force. The change caused by an applied force is proportional to the mass of the body. The kilograms is the measure of mass in the International System of Units (SI). Its definition is based on the Planck constant, which is set at 6.62607015 1034 joule second. The unit of energy known as a joule is one kilogramme times one square metre per second. The kilogramme is determined by precise measurements of Planck's constant, while the second and metre are already defined in terms of other physical constants.

Learn more about mass here:

https://brainly.com/question/506625

#SPJ4

The block's speed when two springs used to launch the same block is 0.71 m/s.

The problems not complete, look at the attachment to see the picture. In picture (2) two springs paralleled. The constant for two paralleled springs
k = k₁ + k₂

k = 25 + 25

k = 50 N/m

When the springs compressed, the conservation energy law applies.

K.E block + P.E springs = K.E' block + P.E' springs

0 + 0.5 × k × Δx² = 0.5 × m × v² + 0

k × Δx² = m × v²

50 × 0.1² = 1 × v²

0.5 = v²

[tex]v = \sqrt{0.5}[/tex]

v = 0.71 m/s

Learn more about conservation energy law here: https://brainly.com/question/11550087

#SPJ4

True statement about the early history of modern physics is option A: it had a very practical component.

The early history of physics could explain everything out of others, thus it had a practical component. The minds of almost all thinkers are left with the patterns of scientific reasoning and apotheosis in modern physics. From the time of the early renaissance to the nineteenth century, physics represented the ultimate expression of scientific investigation for almost all thinkers. The unchanging principles of all motion and life on earth are being derived from its static laws. By the nineteenth century, it seemed that most of science had already been "cleared up," and only a few remaining details remained.

This cosmology was overthrown by the idea of a universal morphing of kinds, which completely altered it. The very view of science held by most people was among the things that had to change in light of Darwin’s work.

To know more about physics, refer to the following link:

https://brainly.com/question/26765510

#SPJ4

Actually, they are a long way away. On average, the distance to the Moon is 238,855 miles (384,400 km).

Using the formula v=2rT, where r is the distance between the earth and the moon and T is the period of time that the moon revolves around the earth, we can attempt to answer this question.

All that is left to do is use G = 6.6 x 10-8 and substitute pi = 3.14159, the Moon's period in seconds, T, and its distance from the Earth's center, R.

To know more about moon orbits visit:-

https://brainly.com/question/15210185

#SPJ1

The wavelength and speed of a wave are known, these can be used to find the frequency of a wave using the equation f=vλ f = v λ.

Wavelength can always be determined by measuring the distance between any two corresponding points on adjacent waves. In longitudinal waves, wavelength measurements are made by measuring the distance from one compression to the next or from one rarefaction to the next.

Forms of electromagnetic radiation such as radio waves, light waves, and infrared waves create characteristic patterns as they travel through space. Each wave has a specific shape and length. The distance between peaks is called the wavelength.

Wavelength is the distance between two wave crests and the same for wave troughs. Frequency is the number of oscillations that pass through a particular point in one second, measured in cycles per second this article discusses the relationship between wavelength and frequency.

Learn more about wavelength here:-https://brainly.com/question/29552794

#SPJ4

It is to be noted that the electron flows occur in Figures (a) and (d).

The total number of electrons in the left plate is equal to the total number of positive charges in the right plate in Figure (a). As a result, no electron flow occurs here. A static electric spark does not occur.

The left plate in Figure (b) has three negative charges and three positive charges. The right plate, on the other hand, has five negative charges and one positive charge. As a result of the neutralization effect, the plates now have additional negative charges. As a result of the extra electrons present, a static electric spark occurs.

The identical thing happens in Figure (c) as it does in Figure (b). As a result, an entire static electric spark happens here as well. The complete negative charges on the right plate are flowing toward the ground in Figure (d). As a result, the left side plate has total negative charges while the right side plate has total positive charges.

As a result, we can see that the electrons flow in Figures (a) and (d). While figures (b) and  (c) show static electric sparks.

Learn more about Electron Flow:
https://brainly.com/question/17642965
#SPJ1

Full Question:

See attached image

The net torque needed to balance is 120N

Weight of the plank W = 80N

Length of the inclined plane S = [tex]\sqrt{9 + 16}[/tex] = 5

Cos θ = 3/5

Net torque needed to balance is τ = W Cos θ s/2

τ = 120 N

The study's subject also refers to torque as a moment, moment of force, rotational force, or turning effect. It is possible to think of torque as the linear force's rotational counterpart. It stands for a force's capacity to alter the body's rotational motion. Archimedes' studies on the use of levers, which are reflected in his well-known saying, "Give me a lever and a place to stand. and I shall move the Earth." similar, led to the development of the concept. a linear force pushes, similar to that. A torque is a movement that twists about or pulls an object. a certain axis. When the strength of the force is multiplied by the angle at which the line of action is perpendicular, torque is the outcome.

Learn more about torque here:

https://brainly.com/question/6855614

#SPJ4

The three ways to acceleration a moving vehicle are to depress the accelerator pedal, depress the brake, push the vehicle, or exert external force.

The rate at which the velocity of an object varies in relation to time is known as acceleration. Accelerations exist in vector quantities (in that they have magnitude and direction). The object's acceleration is determined by the direction of the net force acting on it. The size of the net balance of all external forces acting on the item is, in accordance with the materials used to create it, inversely proportional to its mass, but the magnitude of the net resultant force is directly proportional to the net force.

A moving object's rate of change in direction and speed over time is called acceleration. It is said to be accelerating when anything goes faster or slower. Due to the frequent change in direction, motion on a circle accelerates even while the speed is constant.

Therefore, applying the brake, pushing the car, or applying external force are the four ways to accelerate a moving vehicle. The three other methods are pressing the accelerator pedal.

Learn more about Acceleration here:

brainly.com/question/3046924

#SPJ4

The total internal reflection can occur when light is traveling from glass to its interface with air.

Total internal reflection occurs when light moves from denser to rarer and the angle of incidence is greater than the critical angle.

Total Internal Reflection occurs when light travels from water to air, but it does not occur when light travels from air to water. Total Internal Reflection would occur for light travelling from water to air, but not for light travelling from water (n=1.333) to crown glass (n=1.52). TIR occurs when the angle of refraction approaches 90 degrees before the angle of incidence approaches 90 degrees. Light can only bend away from the normal if the angle of refraction is greater than the angle of incidence. Because light only bends away from the normal when passing from a denser medium to a denser medium, this would be a necessary condition for total internal reflection.

Thus, TIR occurs when light is travelling from glass towards air.

To learn more about total internal reflection refer here

https://brainly.com/question/28231417

#SPJ4

The greatest height that the water can depart through the two points using fluid mechanics expressions is as follows:

1) y = 0.20 m is the maximum height that the water can exit the hose at.

2) The water shoots out of the nozzle at a maximum height of 68.6 meters.

When the water exits the hose, the pressure is atmospheric, and it is the same when it reaches its greatest point. P1 = P2

12 v12 + g y1 = 12 v22 + g v2

At the highest point of  trajectory the velocity must be =zero.

 y₂- y₁ = [tex]v^{2} /2g[/tex]

Let's calculate

  Δy = 0.2 m.

Using Bernoulli's equation,  the speed of the water is the highest point=0.

 Δy = 68.6m

The law of energy conservation is the foundation of Bernoulli's principle, to the fullest extent possible. At various sites when liquid is flowing under a constant pressure differential, the whole energy of the liquid—including pressure energy, potential energy, and kinetic energy—is equalized.

To know more about Bernoulli equation  visit;-

https://brainly.com/question/13093946

#SPJ4

The system will undergo simple harmonic motion, so at time,

t₁ = π/2( [tex]\sqrt{k/m}[/tex])

Simple harmonic motion is described as the periodic motion of a point along a straight line with an acceleration that is always toward a fixed point on that line and a distance from that point that is proportional to that acceleration.

The equation of motion for the simple harmonic oscillation of spring mass system is,

a(t) = -k/m x(t)

here, a(t) = is the acceleration at any time

k = is the spring constant, and

m = mass

The equation for displacement is given as,

x(t) = A cos ([tex]\sqrt{k/m}[/tex])t

here,

x(t) = is the displacement at any time.

A = is the amplitude of oscillations,

The velocity is given by,

v(t) = dx(t)/dt

The general expression of velocity for a simple harmonic motion is,

v(t) = v(max) sin ([tex]\sqrt{k/m}[/tex])t

v(max) = is the maximum velocity.

The kinetic energy is given as,

K(t) = 1/2 m[v(t)]²

Now, use the equation of position:

or, x(t) = A cos ([tex]\sqrt{k/m}[/tex])t

or, 0 = A cos ([tex]\sqrt{k/m}[/tex]) t₁

or, t₁ = π/2( [tex]\sqrt{k/m}[/tex])

Thus, the position of particle at time t₁ is 0. The cosine function is zero first time at angle π/2. The time can be calculated by substituting the values in the position function.

To know more about simple harmonic motion refer to:

https://brainly.com/question/20885248

#SPJ1

When a ball is dropped, the gravitational force that the Earth's gravitational field produces when the object descends downhill is exerted.

In a simple scenario, the ball falls in accordance with the direction of force of gravity, which is always downward. Gravitational acceleration on Earth is 9.8 m/s2 (g=9.8 m/s2). In essence, this indicates that the ball's velocity will increase by 9.8 m/s for every second while it is falling.

You should follow the steps below to determine the net force in one dimension. List every force influencing the thing. by depicting the object's free body in a diagram. Diirection upward is favorable, while diirection downhill is adverse. The net response force downward is obtained by subtracting the positive and negative forces from each other.

To know more about Force:-

brainly.com/question/13634821

#SPJ4

The particle moves along an ellipse with its center at (1,5). As t changes from π/2 to 2π, the particle begins at the location (6,1) and travels clockwise three-fourths of the way around the ellipse to (5,7).

According to the Pythagorean identity, sin²θ+cos²θ=1. The equation of the ellipse when the horizontal axis (main axis) is parallel to the y-axis is given as [tex]\frac{(x-h)^2}{b^2}+\frac{(y-k)^2}{a^2}=1[/tex] where (h,k) is the ellipse center, a is the major axis length, and b is the minor axis length.

Given x = 1 + sin(t) and  y = 5 + 6 cos(t), π/2 ≤ t ≤ 2π. Then,

[tex]\begin{aligned}x& = 1 + \sin(t)\\\sin t&=x-1\end{aligned}[/tex]

and

[tex]\begin{aligned} y&= 5 + 6 \cos(t)\\\cos t&=\frac{y-5}{6}\end{aligned}[/tex]

Then, using Pythagorean identity,

[tex]\begin{aligned}\cos^2t+\sin^2t&=1\\\left(\frac{y-5}{6}\right)^2+\left(\frac{x-1}{1}\right)^2&=1\end{aligned}[/tex]

Comparing the above equation with the equation of an ellipse, we can tell, the center (h,k) is (1,5). Here, a is 6 and b is 1. So the radius of the vertical axis (major axis) is 6 and the radius of the horizontal axis (minor axis) is 1.

As t starts from π/2 to 2π, the particle starts at the point,

(5+1, 1) = (6,1)

And the particles move three-fourths of the ellipse in a clockwise direction to,

(5, 1+6) = (5,7)

Therefore, the blanks can be filled with (1,5), (6,1), and (5,7).

To know more about ellipses:

https://brainly.com/question/14281133

#SPJ4

A wall with an area of 8 cm² is struck by 5.00 x 10²³ nitrogen molecules over the course of 1 s. Assume that the molecules are moving at a speed of 300 m/s and colliding with the wall in an elastic manner. The pressure acting on the wall is  17.43 kPa.

Mass in motion is a definition of momentum. Mass and velocity are multiplied to determine momentum. That is, p = mv where p,m, and v denotes momentum, mass, and velocity.

Given the change in the time period, Δt is 1 second, the number of nitrogen molecules is 5.00×10²³ molecules, the change in velocity Δv is 300 m/s, and the area is 8×10⁻⁴ m².

The momentum of one molecule is given as 2mΔv. Then, the momentum of N molecules is 2NmΔv.

The force exerted on the wall by nitrogen molecule is written as,

[tex]\begin{aligned}\text{Force F}&=\frac{\Delta\text {momentum}}{\Delta t}\\&=\frac{2Nm\Delta v}{\Delta t}\end{aligned}[/tex]

Then, the pressure exerted by nitrogen molecule on the wall is,

[tex]\begin{aligned}P&=\frac{F}{A}\\&=\frac{2Nm\Delta v}{\Delta t\times A}\\&=\frac{2\times 5\times10^{23}\times4.65\times10^{-26}\times300}{8\times 10^{-4}\times 1.00}\\&=\mathrm{17.43\;kPa}\end{aligned}[/tex]

Therefore, the required answer is 17.43 kPa.

To know more about momentum:

https://brainly.com/question/29598011

#SPJ4

Figure shows five identical light bulbs a-e connected to a battery.

Part A: The potential at points 1 and 3 is different because of the internal resistance of B, so B is already glowing.

Part B: If a cut is made at point b, then no bulb will go out because C is already fused.

Part C: If a cut is made on C, then no bulb will go out because D and E were already fused.

When two places in a circuit contain different amounts of charge carriers' energy, this is referred to as a potential difference.

Part A:

Use the concept of potential difference to understand this question.

The bulb will only be lit when there is some potential difference. If the potential difference is zero, then the bulb will not light.

First, redraw the diagram and shown it below:

The potential at points 1 and 3 is different because of the internal resistance of B, so B is already glowing.

Part B

The potential at points 3 and 4 is the same because there is no resistance between them and the potential across C is 3 and 4. So, the potential difference is zero across C and it was already fused.

So, if a cut is made at point b, then no bulb will go out because C is already fused.

Part C

The potential at points 2, 4, 5, and 6 is the same. The potential across D and E is 5 and 6. The potential difference is zero across them, so they were already fused.

If a cut is made on C, then no bulb will go out because D and E were already fused.

To know more about battery refer to:

https://brainly.com/question/5059264

#SPJ1

The complete question is as follows:

Taking three pieces of string from the previous problem and tie two of them together to make a string of double the mass density, V₁ = [tex]\sqrt{2}[/tex]V₂ it wins the race.

An object's mass per unit volume is referred to as its mass density. The units that can be used to describe this characteristic are pounds per square foot (lb/ft²) and kilograms per square meter (kg/m³).

Given that,

tension = 1.2 N

Frequency = 5 Hz.

Length = 40 m

Let, mass density of thin string = m

mass density of thick string = 2m

As we know,

V₁ = [tex]\sqrt{F/m}[/tex]

V₂ = [tex]\sqrt{F/2m}[/tex]

Now,

V₁/V₂ = [tex]\sqrt{F/m} / \sqrt{F/2m}[/tex]

or, V₁/V₂ =  [tex]\sqrt{2} /1[/tex]

or, V₁ = [tex]\sqrt{2}[/tex]V₂

Thus, speed of the thin string is [tex]\sqrt{2}[/tex] times greater than the speed of the thick string. So, it will comes first.

To know more about mass density refer to:

https://brainly.com/question/26364788

#SPJ1

Electromagnetic waves are transverse waves composed by the perpendicular oscillating electric and magnetic fields.

EM waves have both Electrical and magnetic features.

they travel in the velocity of light (3*10⁸ ms⁻¹)

Electromagnetic spectrum is obtained according to their wave length and the frequency. Due to wave length range it's categorized. Here is the decreasing  order of wave length and increasing order  of different wave types in electromagnetic spectrum

Examples,

When electromagnetic radiation interacts with single atoms and molecule, its behavior also depends on the amount of energy per quantum(photon)it carries wave number =1/wavelength in cm speed of light=wavelength x frequency energy = Planck's constant x frequency.

Therefore, electromagnetic spectrum depends on wavelength and frequency

To know more about Electromagnetic, refer: https://brainly.com/question/9184100

#SPJ4

Answer:

Explanation:

1 track section:

V₁ = 67.8 km/h

t₁ = 2.22 h

2nd track section:

V₂ = 0 km/h

t₂ = 20.0 min = (1/3) h ≈ 0.33 h

3 track section:

V₃ = 77.7 km/h

t₃ = 3.33 h

___________

V - ?

D - ?

Length of 1 track section:

D₁ = V₁·t₁ = 67.8·2.22 ≈ 150.5 km

Length 2 sections of track:

D₂ = V₂·t₂ = 0·0.33 = 0 km

Length 3 sections of track:

D₃ = V₃·t₃ = 77.7·3.33 ≈ 258.7 km

Summary path:

D = D₁ + D₂ + D₃ = 150.5 + 0 + 258.7 =  409.2 km

Total time:

t = t₁ + t₂ + t₃ = 2.22 + 0.33 + 3.33 = 5.88 h

Average speed:

V = D / t = 409.2 / 5.88 ≈  69.6 km/h

Each item below can be used to measure the distances of astronomical objects. Rank them according to how far away each method works, from:

Radar ranging > parallax > Cepheids > white dwarf supernovae

The plain displacement or the difference in apparent course of an item as seen from specific factors not on a immediately line with the item. especially : the angular distinction in direction of a celestial frame as measured from two points on the earth's orbit.

Parallax is the discovered displacement of an item due to the trade of the observer's point of view. In astronomy, it's far an irreplaceable tool for calculating distances of some distance away stars.

Parallax mistakes is whilst the pointer of a device looks like it is at a special analyzing when study to the aspect in comparison to when examine face-on. This is because of the gap among the size and the pointer.

Learn more about parallax here:- https://brainly.com/question/29210252

#SPJ4

If the force exerted by block b on block a has a magnitude f, the magnitude of fa is is f, because according to the newtons thied law of motion, the every force there is equal and opposite reaction.

Friction is the force resisting the relative motion of sturdy surfaces, fluid layers, and material factors sliding towards each specific. There are numerous styles of friction: Dry friction is a strain that opposes the relative lateral movement of two stable surfaces in touch.

Friction is a shape of contact pressure. It exists between the surfaces that are in touch. The frictional force relies upon on the character of the floor in contact. The rougher the ground, the extra the friction is involved. The frictional force is proportional to the urgent pressure, that is the burden of the body. it's miles impartial of the place of the touch.

Learn more about friction here:-https://brainly.com/question/24338873

#SPJ4

Find the amount of labor necessary to move an object along the specified orientated curve given the force field F. y = 3x2 on the parabola from (0, 0) to F = (y, x) (4, 48).

A variable force's infinitesimal work can be defined in terms of the force's components and the displacement along the path,

(c) Next, determine the work that the force field F performed on the object to move it through the field by moving it along the vector d. W = F d is the formula for work.

To know more about force field visit:-

https://brainly.com/question/13488023

#SPJ4

The Milgram Experiment with Shock By Saul McLeod, 2017 update One of the most well-known experiments on obedience in psychology was conducted by Yale University psychologist Stanley Milgram.

He conducted an experiment that looked at the tension between following orders and one's conscience. Stanley Milgram, a social psychologist at Yale University, conducted the Milgram experiment (or experiments) on compliance to authoritative persons. November 5, 2018 revision. Stanley Milgram, a psychologist, investigated the ideas of submission and authority in a number of research in the 1960s. His studies comprised giving study participants orders to shock an actor in a different room with shocks of increasing voltage; the actor would scream at first and then go silent as the shocks grew stronger.

To learn more about Stanley Milgram please click on below link

https://brainly.com/question/10138784

#SPJ4

After hanging the mass, the length of the spring is 21.3 cm using Hooke's law.

According to the physics principle known as Hooke's Law, the force required to expand or compress a spring by a given distance is inversely proportional to that distance.

The first traditional example of an explanation of elasticity is Hooke's law. Elasticity is the quality of a substance or item that allows it to return to its original shape after distortion. A restoration force is a capacity to restore the original shape after experiencing distortion.

Given,

Equilibrium length of the massless spring = 20 cm

Spring constant k = 340 N/m

The spring is suspended from the ceiling.

Mass at the free end = 450 g

= 0.45 kg

A force is applied vertically downward on the spring due to the suspended mass which is equivalent to the weight of the mass i.e.

F = mg             ... (1)

This force is balanced by the spring. If the spring is extended by a length of  due to the suspension of the mass then by Hooke's law,

F = kx              ... (2)

From equation (1) and (2)

mg = kx

x = mg/k

Put all the values

x = (0.45)(9.8)/(340)

= 0.013 m

= 1.3 cm

So, the length of the spring is

l = 20 + 1.3

= 21.3 cm

To know more about Hooke's law, visit:

https://brainly.com/question/29126957

#SPJ1

The final temperature in Kelvin was 295.52 K.

The difference between a kelvin (K), a division of the kelvin scale, and a degree on the Celsius scale is where zero is. The zero point on the Kelvin scale is at absolute zero, while the zero point on the Celsius scale is the freezing point of water. As a result, 0oK is equivalent to -273.15oC, while 0oC is equivalent to 273.15 kelvins.

The Standard International (SI) unit of thermodynamic temperature is the kelvin, which is also sometimes referred to as the degree Kelvin (symbol, o K). The formal definition of a kelvin is 1/273.16 (3.6609 x 10 -3) of the thermodynamic temperature of pure water's triple point (H 2 O).

To learn more about temperature in Kelvin refer to:

https://brainly.com/question/14132731

#SPJ1

Answer:

Below

Explanation:

The forces are equal..but opposite........the bug just doesn't handle it as well

The reaction that converts a saturated carboxylic acid into an unsaturated one is the succinate dehydrogenase enzyme.

Any material that tastes sour when dissolved in water is an acid. It also alters the color of some indicators (such as reddening blue litmus paper), reacts with some metals (such as iron) to release hydrogen, combines with bases to create salts, and facilitates a number of chemical activities (acid catalysis).

Sulfuric, nitric, hydrochloric, and phosphoric acids, as well as organic chemicals, belong to the carboxylic acid, ammonium sulfate, and phenol groups, are examples of acids.

Acids are also inorganic entities known as alkaline solutions. These chemicals have one or more hydrogen atoms, which are discharged as positively charged ions in solution.

The full name of the enzyme is succinate dehydrogenase enzyme.

To know more about Acid:

https://brainly.com/question/14072179

#SPJ1

Answer:

5°C is equal to 278 K.

Explanation:

0 degrees Celsius is equal to 273.15 Kelvins. The basic formula is °C + 273.15 = K. Kelvin to Celsius: Add 273.