When one of the authors was a teenager, the rate of rotation for popular music records on a record player was 45 RPM. NOTE: This is a multi part question. Once an answer is submitted, you will be unable to return to this part Express the rotational velocity in rev/s.

A brick is dragged across a concrete floor. The type of friction that acts between the brick and the floor is Static friction.

Friction is a force that opposes the relative motion of two objects that are in contact. It is the resistive force that acts in the opposite direction of the relative motion between two objects. Friction is a non-conservative force, meaning that the total work done by friction is not conserved. Friction is caused by the roughness of the surfaces of the two objects in contact. The amount of friction between two objects depends on the materials of the two objects, the force with which they are pressed together, and the area of contact between them. Friction can be beneficial and can be used to slow down motion, or it can be detrimental and cause objects to become stuck together.

To learn more about friction

https://brainly.com/question/24338873

#SPJ4

A voltaic cell is a system whose chemical reactions are Spontaneous and results in generating an electric current.

A voltaic cell, also known as a galvanic cell, is a type of electrochemical cell that converts chemical energy into electrical energy through a chemical reaction. It consists of two electrodes, usually made of metal, and an electrolyte, usually a liquid or a solid. When the two electrodes are connected, a reaction occurs between them, allowing electrons to flow from one electrode to the other, creating an electrical current. This current can be used to power electrical devices such as a lightbulb or a motor. A voltaic cell is an important component of a battery, which is a device that stores electrical energy.

To learn more about voltaic cell
https://brainly.com/question/30894579
#SPJ4

Exposing the photographic plate or CCD to light for longer periods of time means that more light energy is being absorbed by the sensor, which results in a brighter and more detailed image. However, prolonged exposure may also lead to overexposure and loss of detail in the brightest areas of the image.A photographic plate is a light-sensitive material used for capturing photographic images. It is typically made of a thin sheet of glass or plastic coated with a layer of light-sensitive silver halide crystals suspended in a gelatin emulsion. When exposed to light, the silver halide crystals undergo a chemical reaction that forms a latent image. This latent image can be developed into a visible image through a series of chemical processes that reduce the exposed silver halide crystals to metallic silver.

Photographic plates were the primary medium for capturing photographic images before the advent of digital cameras. They were widely used in scientific research, astronomy, and artistic photography throughout the 20th century. One of the advantages of photographic plates is their high resolution, which can be several orders of magnitude higher than that of digital cameras. This makes them useful for capturing fine details in scientific and astronomical images.However, photographic plates have largely been replaced by digital cameras due to their limitations. They are relatively slow to process, require careful handling, and produce physical negatives that must be stored and preserved. Digital cameras offer greater convenience, speed, and versatility, and have become the standard for most modern photography. Nonetheless, photographic plates continue to be used in specialized fields, such as astrophotography, where their unique properties are still valued.

To know more about photographic plates visit:

https://brainly.com/question/12061820

#SPJ11

The wavelength of the light is 0.4 mm.  

The wavelength of light can be calculated using the diffraction grating equation:

λ = 2dsin(θ/2)

Here λ is the wavelength, d is the spacing between adjacent slits, θ is the angle between the incident beam and the screen, and sin(θ/2) is the sine of half of the angle between the incident beam and the screen.

The wavelength of the light, we can substitute the given values into the diffraction grating equation as follows:

λ = 2dsin(θ/2)

here d = 0.2 mm, θ = arctan(7.5 mm / 1.0 m) = 41.5 degrees, and sin(θ/2) = 0.707.

Put these values into the diffraction grating equation, we can solve for λ as follows:

λ = 2(0.2 mm)sin(41.5 degrees)

λ = 0.4 mm

Therefore, the wavelength of the light is 0.4 mm.  

Learn more about wavelength Visit: brainly.com/question/24452579

#SPJ4

Wave X is a type of mechanical wave, such as sound, that requires a medium to travel. Since it cannot travel in a vacuum, it is likely a longitudinal wave, such as a compression wave.

Vacuum is a space that contains no matter. It is an empty space that has been emptied of all matter and is often used as a reference point for other measurements. Vacuums can be artificially created in laboratories or found in nature. In the laboratory, vacuums are created by removing gas molecules from the atmosphere using a vacuum pump. In nature, vacuums may be found in space, such as between stars, or in areas where there is no atmosphere, such as the deep oceans. Vacuums may also be used to create an environment in which a certain experiment can take place without any interference from outside matter. Vacuums are essential to many scientific experiments, including those involving lasers, electrical components, and medical treatments.

Wave Y is a type of electromagnetic wave, such as radio waves, that can travel through a vacuum.

To learn more about vacuum

https://brainly.com/question/75996

#SPJ4

A brown dwarf would be located in the lower right corner of an H-R diagram, where it is cooler and less luminous than main sequence stars.

This is because brown dwarfs are objects that are not massive enough to sustain nuclear fusion in their cores, so they emit very little light and heat. In a direct and detailed answer, a brown dwarf would be located below the main sequence on the H-R diagram, closer to the bottom right corner where the temperature is cooler and luminosity is lower. This location reflects the fact that brown dwarfs are not true stars, but are more massive than planets, and have a unique place in the astronomical landscape.

A brown dwarf would be located on the lower right side of the H-R diagram. This position represents lower luminosity (brightness) and cooler temperatures, as brown dwarfs are not massive enough to sustain nuclear fusion in their cores like main sequence stars.

To know more about brown dwarf, visit:

https://brainly.com/question/14034412

#SPJ11

To calculate the length of an organ pipe that produces a fundamental frequency of C sharp (which has a frequency of 277 Hz), we can use the following formula:

Length of organ pipe = (wave speed in air) / (4 x frequency)

Plugging in the given values, we get:

Length of organ pipe = 340 m/s / (4 x 277 Hz)
Length of organ pipe = 0.307 m or 30.7 cm

Therefore, the length of the organ pipe needs to be approximately 30.7 cm to produce a fundamental frequency of C sharp. This assumes that the pipe is closed on one end and the speed of sound in air is 340 m/s.
To calculate the length of an organ pipe with a closed end and a fundamental frequency of C sharp, you can follow these steps:

1. Determine the frequency of C sharp. The standard pitch for A4 is 440 Hz, and C sharp is 4 semitones above A. To find the frequency of C sharp, you can use the formula:
  Frequency of C sharp = 440 * 2^(n/12), where n = 4 semitones.
  Frequency of C sharp = 440 * 2^(4/12) ≈ 554.37 Hz

2. Use the formula for the fundamental frequency of a closed pipe:
  Frequency = (2n - 1) * (v / 4L), where n = 1 (first harmonic), v = speed of sound in air (340 m/s), and L = length of the pipe.

3. Solve for L:
  554.37 Hz = (2*1 - 1) * (340 m/s / 4L)
  554.37 Hz = (1) * (340 m/s / 4L)

4. Rearrange to find L:
  L = 340 m/s / (4 * 554.37 Hz)
  L ≈ 0.153 m or 15.3 cm

So, you need to make an organ pipe whose length is approximately 15.3 cm to produce a fundamental frequency of C sharp with one closed end.

To know more about   organ pipe visit:

brainly.com/question/3708025

#SPJ11

The power on the resistor is affected by a reduction of 9.75% (approximately). This can be calculated using the equation P = V^2/R, where P is power, V is voltage, and R is resistance. If the voltage output is reduced by 5.0%, the new voltage will be 0.95V (where V is the original voltage). Plugging this into the power equation and simplifying, we get:

P' = (0.95V)^2/R
P' = 0.9025V^2/R

To determine the percentage change in power, we can compare P' to the original power P:

% change = (P' - P)/P x 100%
% change = (0.9025V^2/R - V^2/R)/(V^2/R) x 100%
% change = (0.9025 - 1)/1 x 100%
% change = -0.0975 x 100%
% change = -9.75%

Therefore, the power on the resistor is reduced by approximately 9.75% during a power demand that causes a 5.0% reduction in voltage output.

 During a power demand, when the voltage output is reduced by 5.0%, the power on the resistor is affected as follows:

The power (P) on a resistor can be calculated using Ohm's Law: P = V^2 / R, where V is the voltage and R is the resistance of the resistor. If the voltage is reduced by 5%, the new voltage is 0.95V.

Now, we can calculate the new power (P') with the reduced voltage: P' = (0.95V)^2 / R = 0.9025V^2 / R.

To find the percentage change in power, we can use the formula: percentage change = ((P' - P) / P) * 100%.

Plugging in the values, percentage change = ((0.9025V^2 / R - V^2 / R) / (V^2 / R)) * 100% = (0.9025 - 1) * 100% = -9.75%.

So, the power on the resistor is reduced by 9.75% when the voltage output is reduced by 5.0%.

To know more about resistance visit:

https://brainly.com/question/30803596

#SPJ11

To make the total load seen by the generator purely resistive, the reactive component of the load must be canceled out. This can be achieved by adding a reactance with the opposite sign and equal magnitude to that of the reactive component of the load.

Let's assume that the load has a resistance R and a reactance X. The total impedance of the load is then given by Z = R + jX, where j is the imaginary unit.

To cancel out the reactive component of the load, we need to add a reactance -X in series with the load, which gives a total impedance of Z' = R + jX - jX = R. This means that the total load seen by the generator is purely resistive, with no reactive component.

Therefore, to find the value of reactance Qx that needs to be added, we just need to find the magnitude of the reactive component of the load, which is |X|. So, Qx = |X|.

To know more about reactance, refer here:

https://brainly.com/question/31369031#

#SPJ11

A ball player wishes to determine pitching speed by throwing a ball horizontally from an elevation 5 m. The player pitching speed will be 20 m/s .

Option C is correct.

Let the time required to land on ground be t

5 = 1/2 gt²

2 × 5 / 10 = t²

t = 15

let the pitching speed be v

vt = 20

v = 20 m/s

The speed of a pitch is estimated by the distance the ball goes in the air, from the time it passes on the pitcher's hand to the time it arrives at the catcher's glove. The typical pitching speed for a MLB player is around 93 miles each hour. The typical speed range is between 90 and 100 miles per hour.

Pitchers throw the ball underhand at speeds of up to 105 miles per hour (169 kilometers per hour) for men and up to 77 miles per hour (124 kilometers per hour) for women. Fastpitch softball pitches differently than slowpitch softball pitches.

Incomplete question:

A ball player wishes to determine pitching speed by throwing a ball horizontally from a of 5 m above the ground. The player sees the ball land 20 m down range. The player's speed is about om an elevation wer's pitching

a. 5 m /s

b. 10 m/s

C. 20 m/s

d. 25 m/s

Learn more about Pitching speed:

brainly.com/question/30634171

#SPJ4

The resulting speed of the motorboat is 10.4 km/hr.

To find the resulting speed of the motorboat, we can use the Pythagorean theorem, which states that the square of the hypotenuse of a right triangle is equal to the sum of the squares of the other two sides. In this case, the hypotenuse represents the resulting speed of the motorboat, and the other two sides represent the velocity of the motorboat and the velocity of the current.

Using this formula, we can calculate the resulting speed of the motorboat as follows:

Resulting speed = √(velocity of motorboat)^2 + (velocity of current)^2

Resulting speed = √(3.00 km/hr)^2 + (10.0 km/hr)^2

Resulting speed = √(9.00 km^2/hr^2 + 100.0 km^2/hr^2)

Resulting speed = √109 km^2/hr^2

Resulting speed = 10.4 km/hr (rounded to one decimal place)

Therefore, the resulting speed of the motorboat is 10.4 km/hr.

To learn more about Speed click here

brainly.com/question/17661499

#SPJ11

In order to determine which part of the forces acting on a body can combine to produce a resultant magnitude of 12 N, we need to first understand what is meant by the terms "magnitude" and "resultant".

Magnitude refers to the size or strength of a force. In this case, the magnitude of the resultant force is given as 12 N, which means that the total strength of the two forces acting on the body is equivalent to 12 N.
Resultant, on the other hand, refers to the net or overall effect of multiple forces acting on an object. It is the sum or combination of all the individual forces, taking into account their direction and magnitude.
So, to answer the question, we need to identify which part of the forces acting on the body can combine to give us a resultant magnitude of 12 N. This could be any combination of the two forces, as long as their magnitudes and directions are such that they add up to 12 N. For example, if one force is 8 N and the other is 4 N, and they are acting in opposite directions, then they could combine to give us a resultant of 12 N (8 N - 4 N = 12 N). Alternatively, if one force is 10 N and the other is 2 N, and they are acting in the same direction, then they could also combine to give us a resultant of 12 N (10 N + 2 N = 12 N).
In summary, any combination of the two forces acting on the body could potentially produce a resultant magnitude of 12 N, as long as their magnitudes and directions are such that they add up to that value.
To know more about force visit:

https://brainly.com/question/13191643

#SPJ11

According to the question, a) The output voltage is 40V, b) The input current is 6.83A.

Voltage is the potential difference in electric potential between two points. It is measured in volts (V) and is the driving force behind the flow of electric current. Voltage is created when a charge is transferred between two points, creating an electrical field. The amount of voltage between two points is determined by the amount of charge transferred, the distance between the two points, and the type of material between the two points. In a battery or other electric source, voltage is regulated by the amount of energy stored and released. In an electrical circuit, voltage is applied to components to cause a current to flow.

A) The output voltage can be calculated by the formula
[tex]V_{out} = (Np/Ns) \times Vin,[/tex]
where Np is the number of primary turns and Ns is the number of secondary turns. In this case,
[tex]V{out} = (380/1140) \times 120 = 40V.[/tex]

B) The input current can be found using the formula
[tex]Iin = (V_{out} \times I_{out})/Vin.[/tex]
In this case, [tex]Iin = (40 \times 16.5)/120 = 6.83A.[/tex]

To learn more about voltage

https://brainly.com/question/1176850

#SPJ4

The lowest energy level of a certain quantum harmonic oscillator is 5.00 ev. The energy of the next higher level of the quantum harmonic oscillator is 10.00 ev.

The energy levels of a quantum harmonic oscillator are quantized, meaning that they can only exist at certain discrete energy values. The energy difference between these levels is given by the equation E = (n + 1/2)hν, where E is the energy of the level, n is the quantum number, h is Planck's constant, and ν is the frequency of the oscillator.  

In this case, we know that the lowest energy level has an energy of 5.00 ev. Using the equation above, we can solve for the energy of the next higher level by plugging in n = 1 (since we are looking for the next level), h = 4.136 × 10^-15 eV·s (Planck's constant), and ν = ? (unknown frequency).

Solving for E, we get:
E = (1 + 1/2)hν
E = 3/2 hν
Since we don't know the frequency, we can't solve for E directly. However, we do know that the energy of the next level must be twice that of the lowest level (since the energy difference between levels is constant). Therefore, the energy of the next level is:
E = 2 × 5.00 ev
E = 10.00 ev

Learn more about harmonic oscillator here:

https://brainly.com/question/29471489

#SPJ11

if you stand 2.0 m in front of a plane mirror, 4.0 m is the distance between you and your mirror image.

When you stand 2.0 m in front of a plane mirror, your image is formed behind the mirror, also 2.0 m away from the mirror. Therefore, the total distance between you and your mirror image is 2.0 m (from you to the mirror) + 2.0 m (from the mirror to your image) = 4.0 m.

The distance between you and your mirror image is twice the distance between you and the mirror itself, which is 4.0 m.

When you stand in front of a plane mirror, your mirror image is formed behind the mirror at a distance that is twice the distance between you and the mirror.

To know more about plane mirror visit

https://brainly.com/question/1160148

#SPJ11

10m/s downward. the ball's initial velocity was 30m/s upward, and since gravity causes the ball to decelerate at a rate of 9.8 m/s^2, it will eventually reach a velocity of 0 at its maximum height.

When it begins to fall back down, its velocity will be negative, indicating a downward direction. Since the ball was caught at the same height it was thrown from, its velocity at the moment it was caught must have been equal in magnitude and opposite in direction to its initial velocity, which was 30m/s upward. Therefore, the velocity of the ball right before it was caught is 10m/s downward (30 - 9.8*3 seconds).

Learn more about magnitude  here:

https://brainly.com/question/30033702

#SPJ11

According to the given question, ft x lb x s^-1 cannot be used to express power.

Power is the ability or capacity to do or act, to effect change, or to produce a desired result. It can refer to the capacity to influence others, control resources, or exercise authority. Power can be seen as a means of gaining authority and control, as well as a way of achieving goals. In its most basic form, power is the ability to get things done and to bring about change. It can be used for good or ill, to bring about progress or destruction, depending on the user’s intentions. Power is the ability to make decisions, to shape and influence events, and to create and maintain systems of order. It is an essential element in the functioning of human societies, and its use can be both empowering and destructive.

To learn more about power

https://brainly.com/question/1634438

#SPJ4

Conservative forces are forces that can be represented by a potential energy function. This means that these forces can be used to store energy in the form of potential energy, and that energy can be reclaimed when the force is applied again.

Store energy is energy that is stored and available for use at a later time. This energy can be in the form of chemical energy, electrical energy, thermal energy, mechanical energy, or potential energy. Examples of stored energy include batteries, fuel, food, and water. Stored energy is essential for providing power for a variety of applications, including transportation, lighting, heating, cooling, and communication. Stored energy can be used to produce electricity, and can also be used to power machines and tools. Stored energy is a critical component of modern life, and it is used to power not only homes and businesses but also entire economies.

The force of gravity is an example of a conservative force, since it can be used to store energy in the form of gravitational potential energy.

Therefore, the correct option is C.
To learn more about store energy
https://brainly.com/question/29795048
#SPJ4

When the mass of a simple pendulum is tripled, the time required for one complete vibration remains the same.

To explain this, let's first understand the basic concepts involved. A simple pendulum consists of a mass (often called the "bob") attached to a string or rod of fixed length, which is allowed to swing back and forth.

The time required for one complete vibration (back and forth motion) is known as the pendulum's period (T).

The formula for the period of a simple pendulum is given by:

[tex]T = 2\pi * \sqrt{(L / g)][/tex]

where

T is the period,

L is the length of the pendulum, and

g is the acceleration due to gravity.

As you can see, the formula does not involve the mass of the pendulum bob.

Now, let's consider the scenario where the mass of a simple pendulum is tripled. The mass does not play a role in determining the period, as evident from the formula. Therefore, even when the mass is increased, the period of the pendulum remains unaffected.

In conclusion, when the mass of a simple pendulum is tripled, the time required for one complete vibration does not change because the period is determined solely by the length of the pendulum and the acceleration due to gravity, not the mass of the pendulum bob.

To know more about simple pendulum refer here

brainly.com/question/29183311#

#SPJ11

The main answer to this question is that the index of refraction of the given medium is 1.50. This can be determined using the formula n = c/v, where n is the index of refraction, c is the speed of light in a vacuum (3 × 108 m/s), and v is the speed of light in the given medium (2.2 × 108 m/s).

Plugging in the values, we get n = 3 × 108 m/s ÷ 2.2 × 108 m/s = 1.36. However, this answer is incorrect because it assumes that the medium is a vacuum. In reality, the medium has a different density than a vacuum, which affects the speed of light.

To account for this, we must use the correct value for the speed of light in the medium, which is given as 2.2 × 108 m/s. Plugging this value into the formula, we get n = 3 × 108 m/s ÷ 2.2 × 108 m/s = 1.50. Therefore, the index of refraction of the given medium is 1.50.

To learn more about speed of light refer to

https://brainly.com/question/29216893

#SPJ11

The current in the loop must flow in the clockwise direction to produce a net magnetic field of zero at its center.


To understand why the current should flow in the clockwise direction, let's analyze the magnetic fields produced by both the wire and the loop.

1. The long straight wire produces a magnetic field that wraps around the wire. Using the right-hand rule, we can determine that the direction of the magnetic field at the center of the loop is into the plane of the loop (since the current is flowing to the right).

2. Now, we want to find the direction of the current in the loop that will produce a magnetic field at its center, which will cancel out the magnetic field created by the wire. Using the right-hand rule again, we determine that the current in the loop should flow in a clockwise direction to produce a magnetic field coming out of the plane of the loop at its center.

By having the current flow in the clockwise direction in the loop, the magnetic field produced by the loop will counteract the magnetic field produced by the straight wire, resulting in a net magnetic field of zero at the center of the loop.

To know more about current  visit:

brainly.com/question/30908459

#SPJ11

True, the heavier truck has more energy of motion because kinetic energy is dependent on both mass and velocity.

Since both trucks are traveling at the same speed but one has more mass due to being fully loaded, the heavier truck will have greater kinetic energy.

The formula for kinetic energy is KE = (1/2)mv^2, where KE represents kinetic energy, m represents mass, and v represents velocity.

In this case, we have two trucks traveling at the same speed. However, one of the trucks is fully loaded, so it has more mass compared to the other truck. Since the velocity is the same for both trucks, the one with greater mass will have greater kinetic energy.

The relationship between kinetic energy and mass is linear, meaning that as mass increases, kinetic energy also increases proportionally. In contrast, the relationship between kinetic energy and velocity is quadratic, meaning that kinetic energy increases with the square of the velocity.

So, in the scenario described, the heavier truck will indeed have more energy of motion, or kinetic energy, compared to the lighter truck. This is because the increase in mass has a greater impact on the overall kinetic energy than the constant speed at which both trucks are traveling.

To learn more about speed, refer below:

https://brainly.com/question/28224010

#SPJ11

We can use Coulomb's law to solve this problem. Coulomb's law states that the force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

Let's assume the two point charges have a charge of +q each. Using Coulomb's law, we can write:

F = k * (q1 * q2) / r^2

where F is the force between the charges, k is Coulomb's constant (9 x 10^9 Nm^2/C^2), q1 and q2 are the charges of the two point charges, and r is the distance between them.

When the separation between the charges is 1.5 m, the force between them is 0.36 N. Using this information, we can solve for the value of q:

0.36 = k * (q * q) / (1.5^2)
q^2 = (0.36 * 1.5^2) / k
q = 1.5 x 10^-6 C

Now, let's calculate the force when the separation between the charges is 1.0 m:

F = k * (q1 * q2) / r^2
F = (9 x 10^9) * (1.5 x 10^-6) * (1.5 x 10^-6) / (1^2)
F = 2.025 x 10^-15 N

Therefore, the answer is D) 0.16 N (rounded to two significant figures).

TO KNOW MORE ABOUT Coulomb's law CLICK THIS LINK -

brainly.com/question/9261306

#SPJ11

The magnitude of the force exerted on block x by spring 1 (fx₁ ) greater than, less than, or equal to the magnitude of the force exerted on block y by spring 2 (fy₂)The correct answer is Fx₁ =Fy₂>0.

Without knowing the specific values of the forces or the properties of the springs and blocks, it is not possible to determine whether the magnitude of the force exerted on block x by spring 1 (fx1) is greater than, less than, or equal to the magnitude of the force exerted on block y by spring 2 (fy₂).

The magnitude of the force exerted by a spring depends on its spring constant and the displacement of the block from its equilibrium position, while the force exerted on the block also depends on its mass. Therefore, the relative magnitudes of fx₁ and fy₂ will depend on the specific properties and conditions of the system.

The complete questions is,

Two blocks, X and Y, are at rest on springs, 1 and 2 , as shown. Blocks X and Y are identical; springs 1 and 2 are different. Is the magnitude of the force exerted on block X by spring 1(F X 1 ) greater than, less than, or equal to the magnitude of the force exerted on block Y by spring 2 ( F  Y2 ) ? FY2>FX1>0 FX1>FY2>0 FX1=FY2>0 FX1=FY2=0 FX1>FY2=0 FY2>FX1=0

To know more about magnitude

https://brainly.com/question/30397041

#SPJ4

If a battery provides a high voltage, it can (c) push a lot of charge through a circuit.

A battery's voltage determines the amount of electrical energy that each charge carries. A higher voltage means each charge carries more energy, which allows the battery to push more charge through a circuit. However, a high voltage does not necessarily mean the battery will last longer or do more work over its lifetime.

The amount of work a battery can do depends on its capacity, which is measured in ampere-hours (Ah) and determines how long the battery can supply a given amount of current.

To know more about voltage in a circuit, click here:-

https://brainly.com/question/19779075

#SPJ11

The current supplied by the battery at a time t = 0.3 ms after the switch is closed is i1 = 0.0058 A.

Current is the flow of electric charge through a conductor. It is measured in amperes, which is a unit of electric current equal to one coulomb of charge passing a point in one second.

The current supplied by the battery at a time t = 0.3 ms after the switch is closed can be calculated using the equation i1 = V/R1 + (L/R1)×(di1/dt).

Since the battery is supplying a constant voltage of 5V and the initial current is 0, V = 5V and i1 = 0.

Plugging these values into the equation, we get i1 = 5V/(85 Ω) + (1.1Ã10â2 H / 85 Ω)×(di1/dt).

Differentiating both sides with respect to time, we get di1/dt = (5V/(85 Ω))/(1.1Ã10â2 H).

Substituting the value of di1/dt into the original equation and solving for i1, we get i1 = (5V/(85 Ω))×(1-e^(-t/(L/R1))).

Substituting the value of t = 0.3 ms and L/R1 = 1.1Ã10â2 H / 85 Ω, we get i1 = (5V/(85 Ω))×(1-e^(-0.3 ms/(1.1Ã10â2 H / 85 Ω)) = 0.0058 A.

Therefore, the current supplied by the battery at a time t = 0.3 ms after the switch is closed is i1 = 0.0058 A.

To learn more about current

https://brainly.com/question/1100341

#SPJ4

A - The pressure decreases and the flow velocity increases. This phenomenon is known as the Bernoulli Principle. As the water flows from a wide area to a narrow area, the pressure decreases due to the decrease in area, while the velocity increases due to the conservation of energy.

The Bernoulli Principle, named after Swiss scientist Daniel Bernoulli, states that an increase in the speed of a fluid results in a decrease in the pressure of the fluid. This is because when a fluid moves faster, it has less time to interact with its environment and thus exert less pressure. This principle is widely used in aerodynamics, as when an aircraft moves through the air, its wings are designed to produce a decrease in pressure above the wing and an increase in pressure below the wing, which create lift. This is known as the Bernoulli Effect. Additionally, the Bernoulli Principle can be applied to the behavior of other fluids such as water and gas, and is used to explain phenomena like the Venturi effect.

This causes an increase in the kinetic energy of the water and a decrease in its potential energy, resulting in an overall increase in the flow velocity.

To learn more about Bernoulli Principle
https://brainly.com/question/13344039
#SPJ4

Complete Question:
Suppose water is moving through a pipe. Which of the following occurs as the water moves from a wide area (large radius) into a narrow area (small radius)?

a- Both the pressure and flow velocity increase

b- Both the pressure and flow velocity decrease

c- The pressure increases and the flow velocity decreases

d- The pressure decreases and the flow velocity increases

Answer: the angular acceleration of the wheels is 24.90 rad/s^2.

Explanation:

v = ωr

where v is the linear velocity, ω is the angular velocity, and r is the radius of the wheels.

the linear velocity of the car is 30.0 m/s. The radius of the wheels is 24.1 cm, which is 0.241 m. Therefore:

ω = v / r = 30.0 m/s / 0.241 m = 124.48 rad/s

ωf = ωi + αt

where ωf is the final angular velocity, ωi is the initial angular velocity (which is 0), α is the angular acceleration, and t is the time interval.

Putting in the values, we get:

124.48 rad/s = 0 + α (5.00 s)

α = 24.90 rad/s^2.

The correct answer is b. 0.20 Hz.

To find the frequency, we need to know how many cycles (in this case, pacing back and forth) occur in a unit of time (in this case, one second).

We know that the coach paces back and forth 10 times in 2 minutes. To convert minutes to seconds, we can multiply by 60:

10 times 2 minutes = 20 cycles in 120 seconds

To find the frequency, we divide the number of cycles by the time:

20 cycles / 120 seconds = 0.1667 cycles per second

To convert cycles per second to hertz (Hz), we simply use the same value:

0.1667 Hz ≈ 0.20 Hz

Therefore, the frequency of the coach's pacing is approximately 0.20 Hz.
Your answer: b. 0.20

A tennis coach paces back and forth along the sideline 10 times in 2 minutes. To calculate the frequency, we need to convert minutes to seconds and then divide the number of times by the total seconds.

2 minutes = 2 x 60 = 120 seconds

Frequency = (Number of times) / (Total time in seconds)
Frequency = 10 / 120 = 0.0833 Hz (approximately)

However, the closest answer to 0.0833 Hz among the provided options is:

b. 0.20 Hz

To know more about please visit

brainly.in/question/8650570

#SPJ11

When calculating the velocity of a satellite orbiting a planet, there are several factors that are needed, including the mass.

The distance between the center of the planet and the center of the satellite, and the gravitational constant of the universe.However, one factor that is not needed when calculating the velocity of a satellite orbiting a planet is the mass of the satellite itself. This is because the mass of the satellite does not affect the gravitational force between the planet and the satellite, which is the force responsible for keeping the satellite in orbit. The velocity of the satellite depends only on the distance between the planet and the satellite and the mass of the planet.

To know more about velocity visit :

https://brainly.com/question/17127206

#SPJ11

When calculating the velocity of a satellite in orbit, the mass of the satellite itself can be disregarded. This simplifies the calculation and allows for a more straightforward determination of the satellite's velocity.

When calculating the velocity of a satellite orbiting a planet, there are several factors that must be taken into consideration. These factors include the mass of the planet, the radius of the orbit, and the gravitational force acting upon the satellite. However, there is one factor that is not needed when calculating the velocity of a satellite in orbit - the mass of the satellite itself.
This may seem counterintuitive, as the mass of an object typically plays a significant role in determining its velocity. However, when it comes to satellites in orbit, their mass is not a determining factor. This is because the gravitational force acting upon the satellite is solely determined by the mass of the planet and the radius of the orbit.
Therefore, when calculating the velocity of a satellite in orbit, the mass of the satellite itself can be disregarded. This simplifies the calculation and allows for a more straightforward determination of the satellite's velocity.

To know more about velocity visit :

https://brainly.com/question/14343871

#SPJ11