Rutherford's experiment suggested that the atom is mostly empty space, with a small, dense nucleus at its center.
The fact that most alpha particles passed through the atom with only minor scattering indicated that the positive charge in the atom is concentrated in the nucleus, which is relatively small compared to the overall size of the atom. The deflection of some alpha particles completely around suggested that the positively charged nucleus exerted a strong repulsive force on the positively charged alpha particles, causing them to be deflected. This led Rutherford to propose a new atomic model, in which electrons orbit a small, dense nucleus at the center of the atom.
Learn more about alpha particles here:
https://brainly.com/question/24276675
#SPJ11
Calculate the molality of potassium hydroxide (molar mass 56 g/mol) in a solution that which contain 112 g of potassium hydroxide in 0.500 kg of water.
Answer:
4 mol/kg
Explanation :
potassium hydroxide = KOH
1.
get moles of solute =
mass of solute KOH ÷ molar mass of KOH
moles of potassium hydroxide =
112 g / 56 g/mol = 2 mol
2.
get Molality =
moles of solute ÷ Mass of solvent
Mass of solvent = 0.500 kg
Molality = 2 mol / 0.500 kg = 4 mol/kg
chatgpt
When a fluid flows with a high velocity, its pressure is __________, and where the velocity is low, the pressure is __________.
When a fluid flows with a high velocity, its pressure is decreased, and where the velocity is low, the pressure is increased.
This is due to the Bernoulli's principle, which states that as the velocity of a fluid increases, its pressure decreases. This can be observed in many everyday situations, such as the pressure difference between the top and bottom of an airplane wing, which allows the plane to lift off the ground.
Similarly, the pressure difference between a showerhead and the water falling from it creates a pleasant, massaging sensation. In general, understanding how fluid pressure changes with velocity is crucial to designing efficient and effective machines, such as airplane engines, hydraulic systems, and water turbines.
More on fluid velocity: https://brainly.com/question/15386075
#SPJ11
e structure of (E)-3-phenyl-2-propenal in the window below. • Consider EIZ stereochemistry of alkenes. • In cases where there is more than one answer, just draw one
The structure of (E)-3-phenyl-2-propenal can be represented as a molecule with a phenyl group attached to the second carbon atom of a propenal chain, where the double bond is in the E-configuration.
The EIZ stereochemistry of alkenes determines the placement of substituents on the double bond based on their relative position to one another. In this case, the phenyl group is on the opposite side of the double bond as the two methyl groups, giving it an E-configuration. The molecule's name provides some important information about its structure. The prefix (E) indicates that the double bond has an E-configuration, meaning the substituents on either side of the double bond are on opposite sides. The 3-phenyl indicates that the phenyl group is attached to the third carbon atom of the propenal chain, while the 2-propenal specifies that the chain has two carbon atoms and an aldehyde group. By using these naming conventions and understanding the EIZ stereochemistry of alkenes, we can accurately represent the structure of (E)-3-phenyl-2-propenal.
Learn more about phenyl group here: brainly.com/question/29448813
#SPJ11
devise a synthesis of 1‑bromo‑3‑chlorobenzene starting from benzene.
To synthesize 1-bromo-3-chlorobenzene starting from benzene, a multi-step process would be required. This process would involve several reactions to introduce the bromo and chloro groups onto the benzene ring.
The first step would be to introduce a nitro group onto the benzene ring via nitration using a mixture of concentrated nitric acid and sulfuric acid. The nitro group would then be reduced to an amino group using a reducing agent such as iron and hydrochloric acid.
Next, the amino group would be diazotized using sodium nitrite and hydrochloric acid to form a diazonium salt. This diazonium salt would then be coupled with cuprous chloride to form a chlorobenzene ring.
Finally, the chlorobenzene would be further reacted with sodium bromide and hydrobromic acid to replace the chlorine atom with a bromine atom, forming 1-bromo-3-chlorobenzene. Overall, this synthesis would require several steps and careful control of reaction conditions to ensure high yields and purity of the desired product.
To know more about benzene visit:-
https://brainly.com/question/26719048
#SPJ11
draw the structure of 3−(tert)−butyl−2−ethyltoluene.
The structure of 3-(tert)-butyl-2-ethyltoluene is a complex organic molecule composed of a toluene ring with an ethyl group and a tert-butyl group attached to the 3rd and 2nd carbon atoms, respectively.
The molecular formula of 3-(tert)-butyl-2-ethyltoluene is C16H26, indicating that it contains 16 carbon atoms and 26 hydrogen atoms. The molecule is composed of a toluene ring, which consists of a benzene ring with a methyl group attached to one of the carbon atoms.
The ring is then further substituted with an ethyl group (C2H5) and a tert-butyl group [(CH3)3C] attached to the 3rd and 2nd carbon atoms, respectively.
The structure of 3-(tert)-butyl-2-ethyltoluene can be visualized as a three-dimensional molecule, with the toluene ring in a planar orientation and the ethyl and tert-butyl groups extending outwards in different directions.
The molecule is characterized by its steric hindrance, which results from the bulky tert-butyl group attached to the toluene ring.
This can affect the reactivity and physical properties of the molecule, making it an important compound in organic chemistry research.
Visit here to learn more about molecule:
brainly.com/question/475709
#SPJ11
how many moles of aqueous ions will be produced from the dissolution of 1.0 mole of li3[fef6] in water?
The number of moles of aqueous ions produced would be dependent on the amount of Li3[FeF6] that dissolves in water. If 1.0 mole of Li3[FeF6] dissolves in water, then 10 moles of aqueous ions will be produced.
To determine the number of moles of aqueous ions produced from the dissolution of 1.0 mole of Li3[FeF6] in water, we need to break down the compound and determine the ions that will dissociate in water.
Li3[FeF6] can be broken down into its constituent ions: 3 Li+ ions and 1 [FeF6]3- ion. When this compound dissolves in water, the [FeF6]3- ion will dissociate into its constituent ions, yielding 1 Fe3+ ion and 6 F- ions. Thus, the total number of aqueous ions produced from the dissolution of 1.0 mole of Li3[FeF6] in water is:
3 Li+ ions + 1 Fe3+ ion + 6 F- ions = 10 aqueous ions
Therefore, the number of moles of aqueous ions produced would be dependent on the amount of Li3[FeF6] that dissolves in water. If 1.0 mole of Li3[FeF6] dissolves in water, then 10 moles of aqueous ions will be produced.
To know more about moles visit:
https://brainly.com/question/30885025
#SPJ11
what are the 5 basic horse coat colors
The 5 basic horse coat colors are bay, black, chestnut, gray, and white.
Bay horses have a reddish-brown body with black points, which include the mane, tail, and lower legs. Black horses have a solid black body with no brown or white markings. Chestnut horses range from a light reddish-brown to a dark liver color, and they have a mane and tail that match their body color. Gray horses are born with a solid coat color, but over time, they develop white hairs that gradually spread throughout their body, giving them a gray appearance. White horses have a pure white coat with pink skin and blue or brown eyes.
Although these are the basic coat colors, there are many variations and combinations of colors within each category. For example, a bay horse can be a dark bay, a blood bay, or a bright bay, depending on the shade of red in its coat.
To learn more about colors click here: brainly.com/question/11887103
#SPJ11
Question 1 of 25
What should you always include in a great summary?
Check all that apply.
A. Predictions
B. Investigation plan
C. Possible errors
D. New questions
SUBMIT
A great summary should include (C) Possible errors (D) New questions
In a great summary, there are several key elements that should be included. These elements help to effectively convey the main points and provide a comprehensive overview of the topic or subject being summarized. The following components are essential in a great summary:
C. Possible errors: Including possible errors or limitations in the summary is crucial as it promotes transparency and acknowledges potential weaknesses in the information presented. By highlighting possible errors, readers are provided with a balanced perspective and can critically evaluate the content.
D. New questions: A great summary should not only present the existing information but also stimulate further thinking and inquiry. Including new questions at the end of the summary encourages readers to delve deeper into the topic, consider alternative perspectives, and explore areas that require more investigation. New questions act as catalysts for intellectual curiosity and drive further exploration and analysis.
Predictions and investigation plans, mentioned in options A and B, are not necessarily always included in a summary. While they may be relevant in certain contexts, they are not universally applicable to every summary. Predictions, for example, are speculative statements about future outcomes and may not always be appropriate or feasible in a summary. Investigation plans, on the other hand, typically pertain to research or scientific studies and are more appropriate in detailed reports or proposals rather than concise summaries.
In summary, a great summary should include possible errors to promote transparency and new questions to encourage further exploration. However, predictions and investigation plans may or may not be included depending on the specific context and purpose of the summary.
for more such questions on errors
https://brainly.com/question/29818808
#SPJ11
.A solution of 0.330 M KOH is used to neutralize 17.0 mL of a 0.188 M H3PO4 solution.
What volume, on milliliters, of the KOH solution is required to reach the endpoint?
H3PO4(aq) + 3KOH(aq) â 3H2O(l) + K3PO4(aq)
Total, 29.081 mL of the 0.330 M potassium hydroxide solution is required to reach the endpoint when neutralizing 17.0 mL of the 0.188 M H₃PO₄ solution.
To determine the volume of the 0.330 M KOH solution required to neutralize 17.0 mL of a 0.188 M H₃PO₄ solution, we can use the concept of stoichiometry and the balanced chemical equation.
The balanced equation shows that 1 mole of H₃PO₄ reacts with 3 moles of KOH. Therefore, the stoichiometric ratio is 1:3.
First, let's calculate the number of moles of H₃PO₄ in the 17.0 mL solution;
Moles of H₃PO₄ = volume (L) × concentration (M)
Moles of H₃PO₄ = 17.0 mL × (1 L / 1000 mL) × 0.188 M
Moles of H₃PO₄ = 0.003196 moles
Since the stoichiometric ratio is 1:3, we know that 0.003196 moles of H₃PO₄ will react with 3 times that amount of KOH. Therefore;
Moles of KOH = 3 × 0.003196 moles
Moles of KOH = 0.009588 moles
Now, let's calculate the volume of the 0.330 M KOH solution needed to reach the endpoint;
Volume of KOH solution (L) = moles of KOH / concentration of KOH
Volume of KOH solution (L) = 0.009588 moles / 0.330 M
Volume of KOH solution (L) = 0.029081 L
Finally, we can convert the volume to milliliters (mL);
Volume of KOH solution (mL) = 0.029081 L × (1000 mL / 1 L)
Volume of KOH solution (mL) = 29.081 mL
Therefore, approximately 29.081 mL of the 0.330 M KOH solution is required to reach the endpoint
To know more about potassium hydroxide here
https://brainly.com/question/31980987
#SPJ4
why are tert-butyl groups locked into the equatorial position? group of answer choices because 1,3-diaxial interactions are unfavorable because there is steric hindrance because it is energetically favorable all of the answers more than one of the answers
Tert-butyl groups are locked into the equatorial position in certain molecules to minimize steric hindrance caused by 1,3-diaxial interactions. This arrangement is energetically favorable as it reduces the repulsive interactions between the bulky tert-butyl group and neighboring substituents.
The equatorial position is preferred for tert-butyl groups in certain molecules due to steric hindrance considerations. When a tert-butyl group is axial, it experiences unfavorable interactions with the neighboring substituents on the same or adjacent carbon atoms. These interactions are known as 1,3-diaxial interactions and can lead to increased energy and distortion in the molecule. By placing the tert-butyl group in the equatorial position, it is oriented away from the neighboring substituents, reducing steric hindrance and minimizing the 1,3-diaxial interactions. This arrangement allows for a more stable conformation of the molecule, as the bulky tert-butyl group is positioned in a way that maximizes the distance between itself and other substituents. Consequently, the equatorial position is energetically favorable and helps maintain the overall stability of the molecule.
Learn more about steric hindrance here: brainly.com/question/11531237
#SPJ11
what are some of the alternative, unconventional resources for oil and natural gas?
There are several unconventional resources for oil and natural gas, including shale gas, tight gas, coalbed methane, and oil sands.
These resources are unconventional because they require specialized extraction techniques, such as hydraulic fracturing and horizontal drilling. Shale gas, for example, is extracted from shale rock formations by injecting a mixture of water, sand, and chemicals at high pressure to release the gas trapped within the rock. Coalbed methane is extracted from coal seams by pumping out water and lowering the pressure, allowing the gas to be released.
Oil sands, on the other hand, are a mixture of sand, water, and bitumen (a heavy crude oil) that require surface mining or in-situ methods to extract. While unconventional resources can provide a significant source of oil and gas, their extraction can be controversial due to environmental concerns and potential impacts on local communities.
To know more about unconventional resources. Visit :-
https://brainly.com/question/32127222
#SPJ11
What is the temperature (in Kelvin) of 0.60 mol of chlorine gas in a 13.0 L containor at 1.7 atm?
According to ideal gas equation, the temperature (in Kelvin) of 0.60 mol of chlorine gas in a 13.0 L containor at 1.7 atm is 4.43 Kelvin.
The ideal gas law is defined as a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given by the equation, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.
Substitution in above formula gives, T= PV/nR=1.7×13/0.608×8.314=4.43 K.
Thus, the temperature (in Kelvin) of 0.60 mol of chlorine gas in a 13.0 L container at 1.7 atm is 4.43 Kelvin.
Learn more about ideal gas law,here:
https://brainly.com/question/28257995
#SPJ1
1. The molar solubility of Ag2SO3 in pure water is 1.55 x 10^-5 M. Use this information to calculate the Ksp for Ag2SO3.
What is the molar solubility of Ag2SO3 in 0.0250 M AgNO3?
To calculate the Ksp for Ag2SO3, we use the following equation:
Ag2SO3(s) ⇌ 2Ag+(aq) + SO3^(2-)(aq)
Ksp = [Ag+]^2[SO3^(2-)]
Given the molar solubility of Ag2SO3 in pure water, we can calculate the solubility product constant (Ksp) as follows:
1.55 x 10^-5 = (2x)^2(x)
where x is the molar solubility of Ag2SO3 in pure water and 2x is the molar concentration of Ag+ ions.
Solving for x, we get:
x = 4.01 x 10^-6 M
Therefore, the Ksp for Ag2SO3 is:
Ksp = (4.01 x 10^-6)^2(2x10^-5) = 3.22 x 10^-17
To determine the molar solubility of Ag2SO3 in 0.0250 M AgNO3, we need to consider the common ion effect. AgNO3 is a soluble salt that dissociates in water to produce Ag+ and NO3- ions. Since the Ag+ ion is a common ion with the one produced by Ag2SO3, it will decrease the solubility of Ag2SO3.
Using the ICE table, we can calculate the new molar solubility of Ag2SO3 in the presence of 0.0250 M Ag+ ions:
Ag2SO3(s) ⇌ 2Ag+(aq) + SO3^(2-)(aq)
I 0.0250 0 0
C -2x +2x +x
E 0.0250-2x 2x x
Ksp = [Ag+]^2[SO3^(2-)]
Ksp = (2x)^2(x)
Ksp = 4x^3
Qsp = [Ag+]^2[SO3^(2-)]
Qsp = (0.0250)^2(4x)
Since Qsp < Ksp, the reaction is not at equilibrium and more Ag2SO3 can dissolve. Therefore, we can assume that 2x << 0.0250 and approximate the expression for Qsp as:
Qsp ≈ (0.0250)^2(4x) = 2.5 x 10^-6
Now, we can use the relationship between Qsp and Ksp to calculate the new molar solubility of Ag2SO3:
Ksp = Qsp
4x^3 = 2.5 x 10^-6
x = 2.77 x 10^-5 M
Therefore, the molar solubility of Ag2SO3 in 0.0250 M AgNO3 is 2.77 x 10^-5 M.
To learn more about solubility click here: brainly.com/question/31493083
#SPJ11
4. if a small amount of carboxylic acid is produced in the oxidation reaction of a primary alcohol with the tempo/tcca, why would you not likely observe it in the ir spectrum of the product mixture? hint: what aqueous solutions are used to extract the organic layer during the product isolation portion of the experiment?
The presence of aqueous solutions during extraction results in the carboxylic acid being less likely to be observed in the IR spectrum, as it is converted into a more soluble salt and removed from the organic layer.
In an oxidation reaction involving a primary alcohol and tempo/TCCA, a small amount of carboxylic acid may be produced. However, it may not be easily observed in the IR spectrum of the product mixture. This is primarily due to the extraction process during the product isolation phase.
During product isolation, aqueous solutions are used to extract the organic layer. Commonly, solutions such as sodium bicarbonate (NaHCO3) or sodium hydroxide (NaOH) are used. These solutions act as bases and can react with the carboxylic acid to form a water-soluble carboxylate salt. This reaction removes the carboxylic acid from the organic layer, causing it to become less concentrated or undetectable in the IR spectrum of the final product mixture.
Hence, the presence of aqueous solutions during extraction results in the carboxylic acid being less likely to be observed in the IR spectrum, as it is converted into a more soluble salt and removed from the organic layer.
To know more about carboxylic acid visit:
https://brainly.com/question/4721247
#SPJ11
Explain the term Absolute Zero in terms of temperature scale and kinetic energy of the substance.
Absolute zero is the lowest possible temperature that a substance can theoretically reach, at which point all molecular motion ceases.
It is represented as 0 Kelvin on the Kelvin temperature scale, which is the only temperature scale that has a true zero point. At absolute zero, the kinetic energy of a substance is at its minimum possible level, since there is no molecular motion and therefore no energy in the form of heat. This makes absolute zero a key reference point for temperature measurement and the study of thermodynamics.
More on Absolute zero: https://brainly.com/question/1191114
#SPJ11
What is the formula of the ionic compound formed when ions of calcium and nitrogen combine? a. CaN b. CaN2 c. Ca2N d. Ca3N2 e. Ca2N3
The formula of the ionic compound formed when ions of calcium and nitrogen combine is Ca3N2. So, the correct option is a.
The combination of calcium and nitrogen involves the transfer of two from each calcium atom to each nitrogen atom, resulting in the formation of two Ca2+ ions and three N3- ions.
To achieve neutrality in the compound, the formula unit must have a total charge of zero. This requires three calcium ions to combine with two nitride ions.
Therefore, the formula of the ionic compound formed is Ca3N2, where the subscripts indicate the number of each ion needed to maintain charge balance.
Visit here to learn more about compound:
brainly.com/question/29547278
#SPJ11
Predict the chemical formula for the ionic compound formed by (a) Ca2+ and Br-, (b) K+ and CO3 2-, (c) Al3+ and CH3COO-, (d) NH4 + and SO4 2-, (e) Mg2+ and PO4 3-.
The chemical formulas for the ionic compounds formed by (a) Ca2+ and Br- is CaBr2, (b) K+ and CO3 2- is K2CO3, (c) Al3+ and CH3COO- is Al(CH3COO)3, (d) NH4+ and SO4 2- is (NH4)2SO4, and (e) Mg2+ and PO4 3- is Mg3(PO4)2.
When an ionic compound is formed, the cation (positively charged ion) and anion (negatively charged ion) combine to form a neutral compound. The chemical formula of an ionic compound indicates the relative numbers of ions that combine to form the compound.
(a) Ca2+ has a 2+ charge and Br- has a 1- charge, so two Br- ions are needed to balance the charge of one Ca2+ ion. The chemical formula for the compound is CaBr2.
(b) K+ has a 1+ charge and CO3 2- has a 2- charge, so two K+ ions are needed to balance the charge of one CO3 2- ion. The chemical formula for the compound is K2CO3.
(c) Al3+ has a 3+ charge and CH3COO- has a 1- charge, so three CH3COO- ions are needed to balance the charge of one Al3+ ion. The chemical formula for the compound is Al(CH3COO)3.
(d) NH4+ has a 1+ charge and SO4 2- has a 2- charge, so two NH4+ ions are needed to balance the charge of one SO4 2- ion. The chemical formula for the compound is (NH4)2SO4.
(e) Mg2+ has a 2+ charge and PO4 3- has a 3- charge, so three Mg2+ ions are needed to balance the charge of two PO4 3- ions. The chemical formula for the compound is Mg3(PO4)2.
Visit here to learn more about Compounds:
brainly.com/question/14782984
#SPJ11
Suppose a sample of benzil is wet with recrystallization solvent, EtOH/water. What effect would this have on the mp? Explain.
If a sample of benzil is wet with recrystallization solvent, EtOH/water, it can lead to a lower melting point (mp) compared to a dry sample.
This is because the presence of moisture in the sample can disrupt the crystal lattice structure, which in turn can result in a lower melting point. During recrystallization, a solvent is used to dissolve the impurities in the sample, and when the sample is cooled, the impurities are removed, leaving behind pure crystals. However, if the sample is wet, the solvent may dissolve the crystal structure, leading to the formation of smaller crystals with a lower melting point. Therefore, it is important to ensure that the sample is completely dry before determining the melting point to get accurate results.
When a sample of benzil is wet with recrystallization solvent, such as EtOH/water, it can impact the melting point (mp) of the sample. The presence of the solvent lowers the mp, as it dilutes the pure benzil and creates an impure mixture. This phenomenon is known as melting point depression. The impurities in the mixture disrupt the crystal lattice, causing the substance to melt at a lower temperature than the pure benzil would. Therefore, it's essential to ensure that the benzil sample is thoroughly dried before determining its melting point to avoid inaccuracies in measurement.
To know about benzil visit:
https://brainly.com/question/31560153
#SPJ11
what is the molarity of a solution that contains 4.37 g of nacl (58.44 g/mol) dissolved in 125 ml of water? question 34 options: 0.000598 m 3.50 m 28.6 m 0.598 m
To find the molarity of a solution, we need to know the moles of the solute and the volume of the solution. First, let's convert the given mass of NaCl to moles: 4.37 g NaCl x (1 mol NaCl/58.44 g NaCl) = 0.0748 mol NaCl Next, let's convert the given volume of water to liters: 125 mL x (1 L/1000 mL) = 0.125 L
Now we can use the formula for molarity: Molarity = moles of solute / volume of solution in liters Molarity = 0.0748 mol / 0.125 L = 0.598 M Therefore, the molarity of the solution is 0.598 M. Molarity is a unit of concentration that is defined as the number of moles of solute per liter of solution. It is often used in chemistry to express the strength of a solution and to make dilutions. To calculate the molarity of a solution, we need to know the number of moles of solute and the volume of the solution in liters.
In this problem, we are given the mass of NaCl (solute) and the volume of water (solvent), and we need to find the molarity of the resulting solution. The first step is to convert the mass of NaCl to moles, using the molar mass of NaCl. The molar mass is the mass of one mole of a substance and is expressed in grams per mole (g/mol). The molar mass of NaCl is 58.44 g/mol, which means that one mole of NaCl weighs 58.44 grams. To convert the given mass of NaCl to moles, we can use the following conversion factor:
To know more about NaCl visit :
https://brainly.com/question/18385870
#SPJ11
write a balanced equation with state symbols for the reaction of hydrogen with oxygen to form water vapour, then rewrite showing displyed formulae
The balanced equation with state symbols for the reaction of hydrogen with oxygen to form water vapor is:
2H2(g) + O2(g) -> 2H2O(g)
This equation means that two molecules of hydrogen gas (H2) and one molecule of oxygen gas (O2) react to form two molecules of water vapor (H2O) in the gaseous state. This reaction is known as a combustion reaction because it involves the rapid combination of a fuel (hydrogen) with oxygen.
The equation can also be written using displayed formulae, which show the individual atoms and bonds in each molecule:
H2(g) + O2(g) -> H-O-H(g) + H-O-H(g)
This equation shows that each molecule of water vapor is made up of two hydrogen atoms and one oxygen atom. The "H-O-H" notation represents the bonds between these atoms.
The balanced equation for the reaction of hydrogen with oxygen to form water vapor is:
2H₂(g) + O₂(g) → 2H₂O(g)
In this equation, "g" represents the gaseous state of the reactants and product. The displayed formula for this reaction would be:
H-H + O=O → H-O-H
This illustrates the formation of water vapor from hydrogen and oxygen molecules. Note that there are two water molecules formed for each oxygen molecule reacting with two hydrogen molecules, ensuring that the equation is balanced.
To know about oxygen:
https://brainly.com/question/13905823
#SPJ11
calculate the concentration of h3o ions present in a solution of hcl that has a measured ph of 1.510 .
The concentration of H3O+ ions in the solution of HCl is 3.72 x 10^(-2) M.
The pH of a solution is defined as the negative logarithm (base 10) of the hydronium ion concentration, or [H3O+].
Mathematically, we can express this relationship as:
pH = -log[H3O+]
Therefore, we can rearrange this equation to solve for [H3O+]:
[H3O+] = 10^(-pH)
Substituting the given pH of 1.510 into this equation, we get:
[H3O+] = 10^(-1.510)
[H3O+] = 3.72 x 10^(-2) M
Therefore, the concentration of H3O+ ions in the solution of HCl is 3.72 x 10^(-2) M.
Learn more about concentration, here:
https://brainly.com/question/3045247
#SPJ11
in a hydrogen fuel cell, what happens at the anode?select the correct answer below:oxygen is oxidizedoxygen is reducedhydrogen is oxidizedhydrogen is reduced
In a hydrogen fuel cell, hydrogen is oxidized at the anode.
At the anode of a hydrogen fuel cell, hydrogen molecules (H2) lose electrons through oxidation, which results in the production of positively charged hydrogen ions (protons) and free electrons. The chemical reaction can be represented as:
[tex]H_{2} -> 2H^{+} + 2e^{-][/tex]
The hydrogen ions move through the electrolyte towards the cathode, while the electrons travel through an external circuit, generating an electric current.
In a hydrogen fuel cell, the correct answer is that hydrogen is oxidized at the anode, leading to the production of hydrogen ions and electrons, which ultimately generates electricity.
For more information on hydrogen fuel cell kindly visit to
https://brainly.com/question/31871948
#SPJ11
What would be the molar solubility of Li3PO4 (Ksp = 2.37 x 10-4) in a 1M LiCl solution?
The molar solubility of Li3PO4 in a 1M LiCl solution is 2.37 x 10^-4 M. To calculate the molar solubility of Li3PO4 in a 1M LiCl solution, we need to use the common ion effect.
This effect occurs when a salt that contains an ion in common with the solute is added to the solution, which reduces the solubility of the solute. In this case, the common ion is Li+ from LiCl. We can use the Ksp equation for Li3PO4 and the equilibrium expression for LiCl to solve for the molar solubility of Li3PO4.
Ksp = [Li+]^3[PO4^-3]
[Li+] = 1M (from the LiCl solution)
2.37 x 10^-4 = (1M)^3 [PO4^-3]
[PO4^-3] = 2.37 x 10^-4 / (1M)^3
[PO4^-3] = 2.37 x 10^-4 M
Therefore, the molar solubility of Li3PO4 in a 1M LiCl solution is 2.37 x 10^-4 M.
To know more about solubility, check out:
brainly.com/question/9098308
#SPJ11
exactly 1 mol of c2h4o2 contains how many moles of c, h, and o?
Exactly one mole of c2h4o2 contains 2 moles of carbon atoms, 4 moles of hydrogen atoms, and 2 moles of oxygen atoms.
When we talk about the molecular formula of a compound like c2h4o2, it tells us the number of atoms present in a single molecule of that compound. So, to determine the number of moles of each element in c2h4o2, we need to first find the total number of atoms in one mole of the compound.
The molecular formula of c2h4o2 tells us that there are 2 carbon atoms, 4 hydrogen atoms, and 2 oxygen atoms in one molecule of the compound. To find the number of atoms in one mole of c2h4o2, we need to multiply the number of atoms in one molecule by Avogadro's number (6.022 x 10^23).
So, for one mole of c2h4o2, we have:
- 2 moles of carbon atoms (2 x 6.022 x 10^23 = 1.2044 x 10^24 atoms)
- 4 moles of hydrogen atoms (4 x 6.022 x 10^23 = 2.4088 x 10^24 atoms)
- 2 moles of oxygen atoms (2 x 6.022 x 10^23 = 1.2044 x 10^24 atoms)
Therefore, exactly one mole of c2h4o2 contains 2 moles of carbon atoms, 4 moles of hydrogen atoms, and 2 moles of oxygen atoms.
To know more about moles visit :
https://brainly.com/question/31906285
#SPJ11
lead nitrate can be decomposed by heating. what is the percent yield of the decomposition reaction if 9.9 g pb(no) are heated to give 5.5 g of pbo?
The percent yield of the decomposition reaction is approximately 82.96%. To calculate the percent yield of the decomposition reaction of lead nitrate (Pb(NO₃)₂), first determine the balanced equation:
Pb(NO₃)₂ (s) → PbO (s) + 2 NO₂ (g) + ½ O₂ (g)
Next, find the molar masses:
Pb(NO₃)₂: 331.2 g/mol
PbO: 223.2 g/mol
Now, calculate the theoretical yield:
(9.9 g Pb(NO₃)₂) x (1 mol PbO/1 mol Pb(NO₃)₂) x (223.2 g PbO/mol) = 6.63 g PbO
Finally, find the percent yield:
(5.5 g actual yield / 6.63 g theoretical yield) x 100 = 82.96%
The percent yield of the decomposition reaction is approximately 82.96%.
To know about Heat visit:
https://brainly.com/question/30603212
#SPJ11
strand discrimination during the process of _____________ is based on dna methylation in e. coli.
Strand discrimination during the process of DNA replication is based on DNA methylation in E. coli.
Methylation is a process where a methyl group is added to the DNA molecule. In E. coli, this helps distinguish the newly synthesized DNA strand from the original parent strand, ensuring accurate replication and avoiding errors.
The strands, on the other hand, are made to aid in curriculum planning by concentrating on the outcomes of the course rather than the inputs, or what the student will gain from it and how we can help them achieve this.
MMR must be able to distinguish between the daughter and parental strands; otherwise, the mis-pair will become a mutation if excision and re-synthesis are improperly directed at the parental strand.
To know more about methylation: https://brainly.com/question/32147438
#SPJ11
A balloon contains an anesthetic mixture of cyclopropane (cp) and oxygen (O2) at 171 torr and 570. torr, respectively. What is the ratio of the number of moles of cyclopropane to moles of oxygen?
A)
3.33
B)
0.230
C)
0.300
D)
0.390
E)
0.460
The ratio of the number of moles of cyclopropane to moles of oxygen is 0.300. Answer choice C is correct.
To find the ratio of the number of moles of cyclopropane to moles of oxygen, we need to first find the mole fractions of each gas.
The mole fraction of cyclopropane is:
X(cp) = (pressure of cp) / (total pressure)
X(cp) = 171 torr / (171 torr + 570 torr)
X(cp) = 0.231
The mole fraction of oxygen is:
X(O2) = (pressure of O2) / (total pressure)
X(O2) = 570 torr / (171 torr + 570 torr)
X(O2) = 0.769
Now we can use these mole fractions to find the ratio of moles of cyclopropane to moles of oxygen:
(moles of cp) / (moles of O2) = (X(cp)) / (X(O2))
(moles of cp) / (moles of O2) = 0.231 / 0.769
(moles of cp) / (moles of O2) = 0.300
Therefore, the ratio of the number of moles of cyclopropane to moles of oxygen is 0.300. Answer choice C is correct.To find the ratio of the number of moles of cyclopropane to moles of oxygen, we need to first find the mole fractions of each gas.
The mole fraction of cyclopropane is:
X(cp) = (pressure of cp) / (total pressure)
X(cp) = 171 torr / (171 torr + 570 torr)
X(cp) = 0.231
The mole fraction of oxygen is:
X(O2) = (pressure of O2) / (total pressure)
X(O2) = 570 torr / (171 torr + 570 torr)
X(O2) = 0.769
Now we can use these mole fractions to find the ratio of moles of cyclopropane to moles of oxygen:
(moles of cp) / (moles of O2) = (X(cp)) / (X(O2))
(moles of cp) / (moles of O2) = 0.231 / 0.769
(moles of cp) / (moles of O2) = 0.300
Therefore, the ratio of the number of moles of cyclopropane to moles of oxygen is 0.300. Answer choice C is correct.
Learn more about cyclopropane here:
https://brainly.com/question/30230113
#SPJ11
calculate the concentration of CO2 in water, which contains 20.25mL of CO2 per 675mL of solution?
Consider how sodium chloride (NaCl and butane (C4H10) interact with water. --?-- is more likely to dissolve in water because it is --?-- and is attracted to the --?-- of water
The long answer to your question is that sodium chloride (NaCl) is more likely to dissolve in water because it is an ionic compound and is attracted to the polar nature of water. When NaCl is added to water, the water molecules surround the Na+ and Cl- ions, pulling them apart from one another and dissolving them into the solution.
This is because water is a polar molecule, meaning it has a slight positive charge at one end and a slight negative charge at the other. These charges interact with the ions in NaCl, making it easy for them to dissolve. On the other hand, butane (C4H10) is a nonpolar molecule and is therefore not attracted to the polar nature of water. When butane is added to water, it will not dissolve because the water molecules are not able to interact with the nonpolar molecule. Instead, the butane will separate from the water and form a separate layer on top, due to its lower density compared to water.
In summary, the polar nature of water allows it to dissolve ionic compounds like NaCl, while nonpolar molecules like butane are not attracted to water and will not dissolve.
To know more about sodium chloride visit:-
https://brainly.com/question/30692088
#SPJ11
acs-what is a ph at the equivalence point when exactly 25.00 ml of 0.1000 m ch3cooh is titrated with 0.1000 m naoh? ka(ch3cooh)
Answer:
The pH at the equivalence point is 7.00.
When 25.00 mL of 0.1000 M CH3COOH is titrated with 0.1000 M NaOH, the reaction is:
CH3COOH + NaOH → CH3COO- + H2O
At the equivalence point, the number of moles of CH3COOH is equal to the number of moles of NaOH. This means that the concentration of CH3COO- is equal to the concentration of H+.
The pKa of CH3COOH is 4.75. This means that the pH at the equivalence point is 14 - pKa = 7.00.
Here is the calculation:
pH = -log[H+]
pH = -log[10^(-4.75)]
pH = 7.00
Explanation:
