When testing a hypothesis, what type of data can be taken?​

Answer:There are two types of atomic bonds - ionic bonds and covalent bonds. They differ in their structure and properties. Covalent bonds consist of pairs of electrons shared by two atoms, and bind the atoms in a fixed orientation. Relatively high energies are required to break them (50 - 200 kcal/mol). Whether two atoms can form a covalent bond depends upon their electronegativity i.e. the power of an atom in a molecule to attract electrons to itself. If two atoms differ considerably in their electronegativity - as sodium and chloride do - then one of the atoms will lose its electron to the other atom. This results in a positively charged ion (cation) and negatively charged ion (anion). The bond between these two ions is called an ionic bond.

Answer:

75.37 g

Explanation:

From the question given above, the following data were obtained:

Percentage of nitrogen (N) in the compound = 36.86 %

Mass of nitrogen (N) in the compound = 44 g

Mass of oxygen (O) in the compound =?

Next, we shall determine the total mass of the compound. This can be obtained as follow:

Percentage of nitrogen (N) in the compound = 36.86 %

Mass of nitrogen (N) in the compound = 44 g

Total mass of compound (T) =?

Percentage of N = mass of N/ total mass × 100

36.86 % = 44 / T

36.86 / 100 = 44 / T

Cross multiply

36.86 × T = 100 × 44

36.86 × T = 4400

Divide both side by 36.86

T = 4400 / 36.86

Total mass = 119.37 g

Next, we shall determine the percentage of oxygen in the compound. This can be obtained as follow:

Percentage of N = 36.86 %

Percentage of O =?

Percentage of O = 100 – 36.86 %

Percentage of O = 63.14 %

Finally, we shall determine the mass of oxygen in the compound. This can be obtained as follow:

Percentage of O = 63.14 %

Total mass = 119.37 g

Mass of O =.?

Percentage of O = mass of O / total mass × 100

63.14 % = Mass of O / 119.37

Cross multiply

Mass of O = 63.14 % × 119.37

Mass of O = (63.14 / 100)× 119.37

Mass of O = 75.37 g

Thus, the mass of oxygen in the compound is 75.37 g

Answer:

The alkyl ether was yet to be totally dried off after the student recrystallize it .

The suggestion to the student is to redry the alkyl ether product and then reweigh

Explanation:

Based on the information the likely explanation for the problem that arise is that the alkyl ether was not totally dried after the student recrystallize the product which lead to the increase in mass from 270mg to 280mg gaining extra mass of 10mg (270mg -280mg).

Therefore what would be my suggestion to the student is that they should redry the alkyl ether product again and make sure that the water is totally dried off and then reweigh or weigh the product again for the second time .

Answer:

dt = 4.32°C

Explanation:

Given the following data;

Mass = 16.33g

Quantity of heat, Q = 63.4J

Specific heat capacity = 0.899 J/g °C

To find the temperature change;

Heat capacity is given by the formula;

[tex] Q = mcdt[/tex]

Where;

Making dt the subject of formula;

[tex] dt = \frac {Q}{mc} [/tex]

Substituting into the equation, we have;

[tex] dt = \frac {63.4}{16.33*0.899} [/tex]

[tex] dt = \frac {63.4}{14.6807} [/tex]

dt = 4.32°C

Therefore, the change in temperature for this aluminum is equal to 4.32°C.

Answer:

thoracic cavity

Explanation:

The ventral body cavity in human body is the front aspect of the human body. Ventral body cavity is combined with the combination of three components that include the thoracic cavity, the pelvic cavity and the abdominal cavity.

So, Thoracic cavity is the  components of the anterior cavity that refers to the the ventral internal organs above the diaphragm.

Hence, the correct answer is "thoracic cavity".

Answer:

D. H2SO4

Explanation:

The chemical  formula of a compound is an expression that stares out the elements (in form of symbols)present in a compound and the number of the atoms.

In the image;

There is one sulphur (S) atom, 4 oxygen(O) atoms and 2 hydrogen (H) atoms

The chemical formula is;

H2SO4.

The correct option is option D.

I think this statement is True.

Answer:

same density

Explanation:

The amount of methanol is a quantitative characteristic, and by the other side the density of methanol is a qualitative characteristic. What I mean is that the amount of methanol is not related to the density; it would be the same density no matter how much methanol you have.

Answer:

Substance D would be the correct answer.

Answer:

d 1 1/2 oz.. of 80-proof liquor

1 1/2 oz. of 80-proof liquor is not equivalent to one drink. Hence, option D is correct.

Oz is an abbreviation for ounce. An ounce is equal to 1/16 pound (437 1/2 grains) and equal to 480 grains, or 1/12 pound.

1 1/2 oz. of 80-proof liquor is not equivalent to one drink.

Hence, option D is correct.

Learn more about oz here:

https://brainly.com/question/1396131

#SPJ5

Answer:

I think the answer is h

Explanation:

when you let the balloon go, all the air the is inside comes out causing it to move forard

Answer:

[tex]6.15x10^2[/tex]

Explanation:

Hello!

In this case, when performing mathematical operations with numbers in scientific notation, the first step is to write them in standard notation:

550 - 65.0

Thus, the result without any significant figures-based analysis is:

615.0

However, since 550 is significant to the ones and 65.0 to the tenths, we need to round the result to the bigger significance, in this case to the ones; therefore the appropriate result would be:

615

That in scientific notation would be:

[tex]6.15x10^2[/tex]

Best regards!

Answer: 1.6x10^22

Explanation: H2O —> H2 + 1/2O2 so half the number of water molecules

Answer:

0.0084

Explanation:

The mole fraction of BaCl₂ (X) is calculated as follows:

X = moles BaCl₂/total moles of solution

Given:

moles of BaCl₂ = 0.400 moles

mass of water = 850.0 g

We have to convert the mass of water to moles, by using the molecular weight of water (Mw):

Mw of water (H₂O) = (2 x 1 g/mol)+ 16 g/mol = 18 g/mol

moles of water = mass of water/Mw of water = 850.0 g/(18 g/mol) = 47.2 mol

The total moles of the solution is given by the addition of the moles of solute (BaCl₂) and the moles of solvent (water):

total moles of solution = moles of BaCl₂ + moles of water = 0.400 + 47.2 mol = 47.6 mol

Finally, we calculate the mole fraction:

X = 0.400 mol/47.6 mol = 0.0084

Answer:

The numder of moles of 7.89*10¹¹ atoms of Carbon is 1.31*10⁻¹².

Explanation:

Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023*10²³ particles per mole. Avogadro's number represents a quantity without an associated physical dimension, so it is considered a pure number that allows describing a physical characteristic without an explicit dimension or unit of expression. Avogadro's number applies to any substance.

Then you can apply the following rule of three, if by definition of Avogadro's number 6.023*10²³ atoms are present in 1 mole of Carbon, 7.89*10¹¹ atoms will be present in how many moles?

[tex]amount of moles=\frac{1 mole*7.89*10^{11} }{6.023*10^{23} }[/tex]

amount of moles=1.31*10⁻¹²

The numder of moles of 7.89*10¹¹ atoms of Carbon is 1.31*10⁻¹².

Answer:

Because heat causes alcohol to volatilize, instead of burning it.

The combustion is not fulfilled since this is detached from the surface of the banknote that would be the necessary product to burn, in addition to considering that the necessary temperature is not reached

Explanation:

When water and alcohol are joined, they form a solution with high evaporation power, plus alcohol that has a higher degree of volatility than water, this is how these liquids are not retained on the surface of the banknote with heat and they are not it burns.

Answer:

Cr₂S₃

Explanation:

From the question given above, the following data were obtained:

Mass of chromium (Cr) = 0.67 g

Mass of chromium sulfide = 1.2888 g

Empirical formula =?

Next, we shall determine the mass of sulphur (S) in the compound. This can be obtained as follow:

Mass of chromium (Cr) = 0.67 g

Mass of chromium sulfide = 1.2888 g

Mass of sulphur (S) =?

Mass of S = (Mass of chromium sulfide) – (Mass of Cr)

Mass of S = 1.2888 – 0.67

Mass of S = 0.6188 g

Finally, we shall determine the empirical formula of the compound. This can be obtained as follow:

Mass of Cr = 0.67 g

Mass of S = 0.6188 g

Divide by their molar mass

Cr = 0.67 / 52 = 0.013

S = 0.6188 / 32 = 0.019

Divide by the smallest

Cr = 0.013 / 0.013 = 1

S = 0.019 / 0.013 = 1.46

Multiply by 2 to express in whole number

Cr = 1 × 2 = 2

S = 1.46 × 2 = 3

Therefore, the empirical formula of the compound is Cr₂S₃

The empirical formula will be "[tex]Cr_2 S_3[/tex]".

Given:

Mass of Cr,

Mass of product,

Now,

→ [tex]Mass \ of \ Sulphur = Mass \ of \ product -Mass \ of \ Cr[/tex]

                                [tex]= 1.2888-0.67[/tex]

                                [tex]= 0.6188 \ g[/tex]

then,

→ [tex]Moles \ ratio \ of \ Cr:S = (\frac{0.67}{51.996} ): (\frac{0.61888}{32} )[/tex]

                                       [tex]= 0.0129: 0.0194[/tex]

                                       [tex]= 2:3[/tex]

Thus the above response is right.

Learn more:

https://brainly.com/question/16051062

Answer: Photosynthesis

Explanation:

Answer:2

Explanationb

Answer:

Chemical because it alters the identity of the substance

Answer:

Gravitational force of attraction G(f) = 2.44 x 10⁻⁷ (approx.)

Explanation:

Given:

Mass M1 = 26 kg

Mass M2 = 5.1 kg

Distance r = 0.19 m

Find:

Gravitational force of attraction G(f)

Computation:

Gravitational force of attraction G(f) = G(m1)(m2)/r²

Gravitational force of attraction G(f) = [6.67 x 10⁻¹¹](26)(5.1)/(0.19)²

Gravitational force of attraction G(f) = 8.84 x 10⁻⁹ / 0.0361

Gravitational force of attraction G(f) = 2.44 x 10⁻⁷ (approx.)

Answer:

[tex]m_{H_2O}=2.22gH_2O[/tex]

Explanation:

Hello!

In this case, since the combustion of butane is:

[tex]C_4H_{10}+\frac{13}{2} O_2\rightarrow 4CO_2+5H_2O[/tex]

As there is an excess of oxygen, we can compute the mass of water by simply using the molar masses of butane and water and the 1:5 mole ratio between them as shown below:

[tex]m_{H_2O}=1.43gC_4H_{10}*\frac{1molC_4H_{10}}{58.14gC_4H_{10}} *\frac{5molH_2O}{1molC_4H_{10}} *\frac{18.02gH_2O}{1molH_2O} \\\\m_{H_2O}=2.22gH_2O[/tex]

Best regards!

Answer:

12.7 mol

Explanation:

A chemist measures the amount of fluorine gas produced during an experiment. He finds that 482. g of fluorine gas is produced. Calculate the number of moles of fluorine gas produced.

Step 1: Given data

Mass of fluorine (m): 482. g

Step 2: Determine the molar mass (M) of fluorine

Fluorine is a diatomic molecule of chemical formula F₂. Its molar mass is:

mF₂ = 2 × mF = 2 × 19.00 g/mol = 38.00 g/mol

Step 3: Determine the number of moles (n) corresponding to 482. g of fluorine

We will use the following expression,.

n = m/M

n = 482. g/(38.00 g/mol)

n = 12.7 mol

Answer:

I think that it might be C. I'm not an expert so please don't blame me, I'm sorry if i'm wrong!

Explanation:

Answer:

its ice cream

Explanation

im taking the exam <3 and there is more blue on the the graph then any other color so its queit obv.

Answer:

The correct answer is option B, that is, CO + H2O → H2 + CO2

The redox reactions are regarded as the chemical reactions in which one reactant goes through the process of reduction and one reactant goes through the process of oxidation. The reduction reactions are the reactions in which gain of electrons occurs, while oxidation reactions are the reactions in which loss of electrons occurs.  

From the mentioned options, only option B, that is, CO + H2O → H2 + CO2 is a kind of redox reaction. In this, the carbon is getting oxidized from +2 to +4 oxidation state, and hydrogen is getting reduced from +1 to 0 oxidation state. Hence, this reaction can be regarded as a redox reaction.

Explanation:

Answer:

Not all conflicts are harmful to an organization

Explanation:

Not all conflicts in an organization are harmful to that organization.

Conflicts can be good for an organization. Even though conflicts may always seem difficult, they could bring about growth and changes which are good for all organizations.

Conflict may have positive or negative results when they occur. How these conflicts are approached is what determines the result.

Positive conflict can be constructive, it births new ideas, gives opportunities for creativity and skills expansion and can solve continuous problems.

Answer:

B.) A Liquid turns into Gas.

Answer: In gases the particles move rapidly in all directions, frequently colliding with each other and the side of the container. With an increase in temperature, the particles gain kinetic energy and move faster. The actual average speed of the particles depends on their mass as well as the temperature – heavier particles move more slowly than lighter ones at the same temperature. The oxygen and nitrogen molecules in air at normal room temperature are moving rapidly at between 300 to 400 metres per second. Unlike collisions between macroscopic objects, collisions between particles are perfectly elastic with no loss of kinetic energy.

Explanation:  This is very different to most other collisions where some kinetic energy is transformed into other forms such as heat and sound. It is the perfectly elastic nature of the collisions that enables the gas particles to continue rebounding after each collision with no loss of speed. Particles are still subject to gravity and hit the bottom of a container with greater force than the top, and giving gases weight. Hope this helps with your problem! Byeeee :DDD

It's sad seeing people actually helping you lol.

and then you dont give brainliest. like ever.

Answer:

A and 3

B and 2

C and 1

Explanation:

Ionic bonding is the transfer of electrons from a cation to an anion.

Covalent bonding is the sharing of electrons between nonmetal atoms.

Metallic bonding is the sea of electrons metal cations.

Hope this helped!