The potential energy of a rocket increases when its escapes from the influence of the earth. It increases when it escapes the earth's boundary.
What is escape speed?Escape velocity or escape speed is the minimum speed required for a free, non-propelled object to escape from the gravitational pull of the main body and reach an infinite distance from it in celestial physics.
It is commonly expressed as an ideal speed, neglecting atmospheric friction.
If a spacecraft is launched from the moon at the escape speed of the earth then the value of escape speed will be the difference in both the velocities.
An object's height above the zero position directly relates to its gravitational potential energy.
The kinetic energy of motion is converted into gravitational potential power as your rocket ascends.
The rocket possesses gravitational potential energy as it climbs because it is becoming farther away from the Earth's surface, much as a positive and negative charge moving apart.
The potential energy of a rocket increases when its escapes from the influence of the earth. It increases when it escapes the earth's boundary.
To learn more about the escape speed refer to the link;
https://brainly.com/question/14178880
#SPJ1
sound travels through a
Answer:
A.3.64 m
Explanation:
Because
v=(fλ)(1382)=(380)λλ=3.637m~3.64mwhere ,v=velocity
f=frequency
λ=wave length
Answer:
3.64
Explanation:
the formula is Already provided which is Velocity(m/s)= frequency (HZ) × wavelength
making wavelength stand alone
wavelength= velocity/ frequency
wavelength= 1382/380
wavelength= 3.64
Question 2 of 32
What did Ernest Rutherford's experiment of a beam of alpha particles aimed
at a sheet of gold foil lead him to conclude?
If a liquid has a density of 1.67 g/cm^3, what is the volume of 45g of the liquid?
Answer:
V = 26.95 cm³
Explanation:
Density is given by the formula :
ρ = m÷V
Density = mass ÷ Volume
Given both density and mass we rearrange, substitute and solve for Volume :
Rearranging the equation to make Volume the subject :
ρ = m÷V
ρV = m
V = m÷ ρ
Now substitute :
V = 45 ÷ 1.67
V = 26.9461077844
Take 2 decimal places as the density is 2 decimal places :
V = 26.95
Units will be cm³ as it is volume
Hope this helped and have a good day
1. George is traveling to Boston from Springfield. Springfield is 144
kilometers from Boston. If speed-(distance)/(time), how fast was he
going if it took him 3 hours to get to our state capital?
Answer:
48 kilometers per hour
Explanation:
144/3 = 48 km/h
Questions: 1. A table of weight 500N has four legs covering a total area of 0.5m². Calculate the pressure applied by the table on the ground
2. A man with a mass of 50kg, is standing on the ground. His two feet cover an area of 0.01m². calculate the pressure exerted by his two feet
3. An elephant has a weight of 40000N and her feet cover a total area of 0.5m². A woman weighs 600N and area of her heels in contact with the ground is 0.0075m². Who exerts the greatest pressure on the ground?
Answer:
shown below
Explanation:
1) P = F/A
P = 500 / 0.5
P = 1000N/m²
2) W = mg
W = 50 x 9.8
W = 490
P = F/A
P = 490 / 0.01
P = 49000N/m²
3) P = F/A
For E:
P = 40000 / 0.5
P = 80000N/m²
For W:
P = 600 / 0.0075
P = 80000N/m²
They're exerting the same amount of pressure on the ground
A 20kg object acceleration by a force of 200N with coefficient of kineticfriction is 0.4 what is acceleration of the object?
Answer:
Given - M = 20 kg
k = 0.4
F = 200 N
To find - acceleration
Solution -
F= kMA
200 = 0.4 * 20 * acceleration
200 = 8 * a
a = 8/200
a = 0.04 m s²
a = 0.04 m s²how do the interiors of jupiter and saturn differ? (select all that apply.)
The interior part of Jupiter and Saturn are different from each other due to difference of core and magnetic field.
How do the interiors of Jupiter and Saturn differ?The interiors of Jupiter and Saturn differ from one another because Jupiter has a larger metallic hydrogen core as compared to Saturn. It has stronger magnetic field as compared to Saturn.
So we can conclude that the interior part of Jupiter and Saturn are different from each other due to difference of core and magnetic field.
Learn more about Jupiter here: https://brainly.com/question/3522722
#SPJ11
Please, please help i will give 50 points to someone who will help me get this correct!!!!!
can you write the question because i cant see it
Samuel pushes against a door with a force of 10N, but the door doesn't move. Has Samuel done work on the door?
No, Samuel hasn't done work, Since the door doesn't move.
What is work done?Work is said to be done when an applied force moves an object over a given distance.
W = Fd
where;
W is work doneF is the applied forced is the distanceSince the door doesn't move, we can conclude that Samuel hasn't done work.
Learn more about work done here: https://brainly.com/question/8119756
#SPJ1
Two marbles, one twice as heavy as the other, are dropped to the ground from the roof of a building. Just before hitting the ground, the heavier marble has 1. as much kinetic energy as the lighter one. 2. twice as much kinetic energy as the lighter one. 3. half as much kinetic energy as the lighter one. 4. four times as much kinetic energy as the lighter one. 5. impossible to determine
Given that one marble is twice as heavy as the other, the correct statement is: the heavier marble has twice as much kinetic energy as the lighter one
How to determine the energy of the lighter marbleMass = mAcceleration due to gravity = gHeight = hKinetic energy of light marble (KE₁) =?KE = PE = mgh
KE₁ = mgh
How to determine the energy of the heavier marbleMass = 2mAcceleration due to gravity = gHeight = hKinetic energy of heavier marble (KE₂) =?KE = PE = mgh
KE₂ = 2mgh
How to campare both kinetic energies Kinetic energy of light marble (KE₁) = mghKinetic energy of heavier marble (KE₂) = 2mghComparison (KE₂ / KE₁) =?KE₂ / KE₁ = 2mgh / mgh
KE₂ / KE₁ = 2
Cross multiply
KE₂ = 2 × KE₁ =
KE₂ = 2KE₁
Learn more about energy:
https://brainly.com/question/10703928
#SPJ12
Select the correct answer.
Jack lives in a society where he has almost no political power. Governmental institutions handle all political, social, and economic affairs.
Which political system is this?
OA. totalitarianism
B. monarchism
C. democracy
D. chiefdom
Answer:A or totalitarianism
Explanation: Totalitarianism is an authoritarian form of government in which the ruling party recognizes no limitations whatsoever on its power, including in its citizens' lives or rights
Some characteristics of totalitarianism:
Rule by a single party.
Total control of the military.
Total control over means of communication (such as newspapers, propaganda, etc…)
Police control with the use of terror as a control tactic.
Control of the economy.
PLEASE HELP
Identify and describe at least (3) physical science concepts to help with blackout.
Physics science in blackout involves the transmission of electrical impulses, neurotransmitter signaling and loss of coordination (body movements).
What is blackout?The expression 'blackout' refers to the loss of memory remembers of one person due to the effects of alcohol.
During this process, a person may lose his/her ability to move due to failure in the transmission of electrical impulses and neurotransmitter signaling.
In conclusion, physics science in blackout involves the transmission of electrical impulses, neurotransmitter signaling and loss of coordination (body movements).
Learn more about blackout here:
https://brainly.com/question/10462033
#SPJ1
How many moles of fluorine atoms are in a sample of fluorine that contains 7.45 x 1024 fluorine atoms?
12.4 moles of fluorine atoms are in a sample of fluorine that contains 7.45 x 10²⁴ fluorine atoms. Details about number of moles can be found below.
How to calculate number of moles?The number of moles in a molecule of a substance can be calculated by dividing the number of molecules by Avogadro's number.
According to this question, a sample of fluorine that contains 7.45 x 10²⁴ fluorine atoms. The number of moles in this sample can be calculated as follows:
no of moles = 7.45 × 10²⁴ ÷ 6.02 × 10²³
no of moles = 1.24 × 10¹
no of moles = 12.4moles
Therefore, 12.4 moles of fluorine atoms are in a sample of fluorine that contains 7.45 x 10²⁴ fluorine atoms.
Learn more about no of moles at: https://brainly.com/question/14919968
#SPJ1
Which of the following consists of photovoltaic cells?
1. Solar panels
2. Rube Goldberg device
3. Solar oven
4. Electric generator
6.Riding his bike, Mike can start from rest and get going at 10 m/s in 4 seconds. Joy can get
going 15 m/s in 5 seconds. Who has a greater acceleration? How do you know?
Answer:
Joy has a greater acceleration.
Explanation:
Mike
v = v₀ + at
10 = 0 + 4a
a = 2.5 m/s²
Joy
v = v₀ + at
15 = 0 + 5a
a = 3 m/s²
--
Using the UAM equations, we can determine that Joy's acceleration is 3 m/s² while Mike's acceleration is only 2.5 m/s².
Against the park ranger's advice, a visitor at a national park throws a stone horizontally off the edge of a 83 m high cliff and it lands a distance of 93 m from the edge of the cliff, narrowly missing a visitor below.
What was the initial horizontal velocity of the rock, in m/s? You can round your answer to the hundredths place and use g ≈ 10 m/s2.
Transparent or translucent materials
are used to make
A stop signs
B suitcases
C color filters
D toothbrushes
Answer:
C
Explanation:
you need to be able to see through a colour filter, which means youd need transparent or translucent
Transparent materials passes light and they reflect also. The color filters are made by transparent or translucent materials. Thus option c is correct.
What is transparency?The ability of a material to pass light through it is called transparency. Some transparent materials can reflect the light. For example mirror, glasses etc. The materials which passes light but are not transparent is called translucent materials.
The material which does not pass light inside is called opaque. Wood, plastics etc. are opaque materials. Transparent covers, glasses make their inside visible.
Colour filters are made by transparent or translucent materials. They are used to filter or choose a particular colour from a group of reflected lights.
Color filters are used in spectrometers and other optical devices. They filter the incoming wavelengths to select the desired one. Hence, option c is correct.
To find more about color filters, refer the link below:
https://brainly.com/question/28455847
#SPJ2
ALWAYS use significant figure rules. Remember that these rules apply to all numbers that are measurements. In working this problem, assume the value of "g" to be 9.8 m/s2 with two (2) significant digits unless otherwise stated. Calculate the increase in potential energy of a 60.0-kg man who climbs a ladder 10.0 meters high.
5880
600
58,800
The increase in potential energy of a 60.0-kg man who climbs a ladder 10.0 meters high is 5,880 J.
Increase in the potential energy of the man
The increase in the potential energy of the man is calculated as follows;
P.E = mgh
where;
m is mass of the manh is height attained by the mang is acceleration due to gravityP.E = 60 x 9.8 x 10
P.E = 5,880 J
Thus, the increase in potential energy of a 60.0-kg man who climbs a ladder 10.0 meters high is 5,880 J.
Learn more about potential energy here: https://brainly.com/question/1242059
#SPJ1
Where is UTC the local time?
UTC is generally adopted as the local time at Prime Meridian (PM).
What is UTC?UTC is an abbreviation for Coordinated Universal Time and it can be defined as a local time standard by which all clocks, time and time zones are regulated around the world.
This ultimately implies that, Coordinated Universal Time (UTC) is generally adopted as the local time at Prime Meridian (PM) because it nominally reflects mean solar time.
Read more on UTC here: https://brainly.com/question/14333785
#SPJ12
the question is confusing
Alpha particles have highest mass.
Alpha particles are most ionising.
Gamma particles are the most penetrating.
Beta particles are negatively charged.
Gamma particles have the highest speed.
Comparing the three types of ionizing radiation-alpha particles have the greatest mass. Alpha particles have approx 4 times the mass of a proton or neutron and 8,000 times the mass of a beta particle. Ionising power of alpha particle is very high due to double positive charge, large mass as compared to a beta particle. Alpha particles can cause multiple ionisations within a very small distance. Beta radiation is more penetrating than alpha radiation. beta radiation can pass through the skin, but it is absorbed by a few cm of tissue of the body or a few mm of aluminum. Gamma radiation is the most penetrating of the three radiations. Alpha particles are positively charged, while beta particles are negatively charged, and gamma radiation is electrically neutral. Gamma rays are similar to visible light but they have higher energy. Gamma rays are emitted along with alpha or beta particles during radioactive decay.learn more about gamma rays here:
https://brainly.com/question/2399890
#SPJ10
Find the mass of a sample of water if its temperature dropped 24.8 °C when it lost 870 J of
heat. (Remember that specific heat capacity of water 4200 J/kg °C)
Answer:
8.35 ×[tex]10^{-3}[/tex] kg
Explanation:
Remember the formula for heat:
[tex]Q=mc\Delta T[/tex]
You just need to solve for m, doing so you're left with:
[tex]m=\dfrac{Q}{c\Delta T}[/tex]
Replace the variables with numbers and that's it.
The mass of a sample of water is 0.841 kg.
What is specific heat?Specific heat is the amount of heat energy required to raise the temperature of one unit of mass of a substance by one degree Celsius (or Kelvin). It is a characteristic property of a substance that reflects its ability to store and release thermal energy.
Different substances have different specific heat capacities, depending on their chemical composition and physical properties. For example, water has a high specific heat capacity of 4,200 joules per kilogram per degree Celsius (J/kg°C), which means that it takes a large amount of heat energy to raise the temperature of water by one degree Celsius. In contrast, metals such as copper and aluminum have much lower specific heat capacities, which means that they heat up and cool down more quickly than water when subjected to the same amount of heat energy.
The specific heat of a substance can be measured experimentally using calorimetry, which involves measuring the amount of heat energy absorbed or released by a substance as it undergoes a change in temperature. The specific heat of a substance is an important parameter in many fields of science and engineering, including thermodynamics, materials science, and environmental science.
Here in the Question,
We know the formula:
Q = mcΔT
where:
Q = amount of heat lost by the sample of water, which is -870 J (negative because heat is lost)
m = mass of the sample of water, which is what we need to find
c = specific heat capacity of water, which is 4200 J/kg °C
ΔT = change in temperature, which is -24.8 °C (negative because temperature dropped)
Substituting the values, we get:
-870 J = m(4200 J/kg °C)(-24.8 °C)
Simplifying, we get:
m = -870 J / (4200 J/kg °C × -24.8 °C)
m = 0.841 kg
Therefore, the mass of the sample of water is 0.841 kg.
To learn about latent heat click:
https://brainly.com/question/30762921
#SPJ2
Select the correct location on the image.
Identify the magnetic north pole of Earth’s magnet.
The magnetic north pole of the earth's magnet is in the geographic south pole.
There are two magnetic and geographic poles each, north and southThe two geographic poles are the locations where the earth's axis of rotation passes through which is imaginaryThe magnetic north and south poles are not the same as the geographic north and south polesIn a compass, the needle points to the magnetic north poleBy convention, the magnetic north pole corresponds to the geographic south poleThe magnetic south pole corresponds to the geographic north poleThe magnetic field lines of a magnet start from the magnetic north pole and end at the magnetic south poleThe magnetic north pole of the earth's magnet is the geographic south pole.
Learn more about earth's magnetism here:
https://brainly.com/question/3928159
#SPJ10
26.6 00
Fig. E26.6 both meters are ide-
alized, the battery has no appre-
ciable internal resistance, and the
ammeter reads 1.15 A. (a) What
does the voltmeter read? (b) What
is the emf & of the battery?
26.7 For the circuit shown
For the circuit shown in Figure E26.6
V
45.0 Ω
25.0 Ω
ww(A)
|15.0 Ω
www
|15.0 Ω
W
www
ww
4+
35.0 = ?
10.0 Ω
a. The voltmeter reads 0.053 volts
b. The electromotive force, emf of the battery is 0. 106 volts
How to determine the voltmeter reading
a. Given the current = 1. 15A
Voltmeter reads the voltage = V
Resistance could be gotten from the diagram = R
V = IR
To find the resistance from the structure
First, find the resistance in parallel
Resistance in parallel = 1/R1 = 1/R2 + 1/R3 = 1/25 + 1/15 + 1/15 = 0. 17 Ohms
Now, find the resistance in series
Resistance in series = R1 + R2 + R3 = 45 + 0. 17 + 10 = 55. 17 Ohms
Finally, the resistance in parallel = 1/35 + 1/55. 17 = 0. 028 + 0. 018 = 0. 046 Ohms
Substitute values into the equation
V = IR
V = 1. 15 * 0. 046
V = 0. 053 Volts
b. To find the Emf, use the formula
Emf = V + Ir
Substitute the values into the formula
Emf = 0. 053 + 1.15 * 0.046
Emf = 0. 053 + 0. 0529
Emf = 0. 106 volts
Therefore, the voltmeter reads 0.053 volts and the electromotive force of the battery us 0. 106 volts
Learn more about electromotive force here:
https://brainly.com/question/17082851
#SPJ1
Two liquids A and B of relative densities 0.7 and 0.4 respectively are mixed with water, kl. How will the mixture. arrangement occur in a given container?
The liquid A is present lower in the container as compared to liquid B due to more weight.
How will the mixture. arrangement occur in a given container?If two liquids A and B of relative densities 0.7 and 0.4 respectively then the lower density liquid remain at the top and higher density solution which is liquid A remains lower in the container because higher density solution has more weight.
So we can conclude that the liquid A is present lower in the container as compared to liquid B due to more weight.
Learn more about density here: https://brainly.com/question/1354972
#SPJ1
A compound microscope that has an eyepiece lens with a magnification of 10X and an objective lens with a magnification of 25X will have a total magnification of __________ times.
Answer:
35
Explanation:
total magnification = eyepiece lens x objective lens
TM = 10X x 25X
TM = 250X
3. State Newton's first and second laws of equation. A. A body of mass 2kg move vertically upwards has its velocity increased uniformly from 15m/s to 45m/s in 5s. neglecting air resistance, the upward vertical force acting on the body. [g=10ms 2] B. The velocity ratio and efficiency of pulley are 8 and 85% respectively. How much effort is required to lift a load of 120kg with this system [g=10m/s²]
Answer:
See below.
Explanation:
Newton's First Law
A body at rest persists in its state of rest, and a body in motion remains in constant motion along a straight line unless acted upon by an external force.
Newton's Second Law
A body's acceleration is directly proportional to the force exerted on it and is in the same direction as the force. F=mA (Force = Mass x Acceleration)
==============================================
A. A body of mass 2kg move vertically upwards has its velocity increased uniformly from 15m/s to 45m/s in 5s. neglecting air resistance, the upward vertical force acting on the body. [g=10ms 2] B. The velocity ratio and efficiency of pulley are 8 and 85% respectively. How much effort is required to lift a load of 120kg with this system [g=10m/s²]
Force = Mass x Acceleration
Acceleration is (45m/s - 15 m/s)/5 sec) or 6 m/sec^2
Force = 2kg*(6 m/sec^2)
Force = 12 kg*m/s^2 1 kg*m/s^2 is the SI unit for force, and is named 1 Newton(N), after . . . Newton.
Force = 12N
B. I'm not sure how to interpret "The velocity ratio and efficiency of pulley are 8 and 85% respectively." I'll assume "effort" is the energy required.
I'll calculate the energy required in a perfect system, and then we'll consider the efficiency issues.
By lifting an object with mass off the Earth's surface (height = 0 meters) we impart a potential energy, PE, to the object. This energy is stored in the object until it is allowed to move back closer to Earth. This potential energy is given by the equation:
PE = mgh
where PE is potential energy in Joules, m is mass in kg, g is the acceleration due to Earth's gravity (9.8 m/sec^2, but we'll use 10 m/sec^2 as stated in the problem), and h is the vertical distance moved, in meters.
PE = (120kg)(10 m/sec^2)(h). We aren't given a height, h. Let's express the answer in terms of 1 meter: How much potential energy is put into the 120kg load to raise it 1 meter?
PE = (120kg)(10 m/sec^2)(1 m)
PE = 1200 kg*m^2/sec^2 or 1200 kg*m/sec^2 per meter
The unit kg*m/sec^2 is 1 Joule
PE = 1200 Joules/meter
1200 Joules are required to raise 120kg 1 meter. This is increased due to the less-tha-100% efficiency of 85%.
At 85% efficiency, the energy required would be 1200J/0.85 = 1412 J to raise 120kg 1 meter, with 85% efficiency, I don't6 know how to handle the velocity ratio number.
NEED ANSWER ASAP!!!! Tony pulls a luggage cart at an angle of 30° to the horizontal. The luggage cart has a mass of 35 kg, and he pulls with a force of 75 N.
a. What is the normal force on the luggage cart?
b. What force would Tony need to apply at a 30° angle to pull the luggage cart completely off the ground?
c. How does your answer in part (b) change as the angle increases?
a)The normal force on the luggage cart will be 305.85 N
b)The force would Tony needs to apply at a 30° angle to pull the luggage cart willl be 375 N.
What is the friction force?It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).
it is defined as the product of the coefficient of friction and normal reaction.
On resolving the given force and acceleration. Mathematically aion in the different components and balancing the equation gets.Components in the x-direction.
Given data;
The angle of pulling with horizontal. = 30°
Mass of luggage cart=35 kg
Pulling force= 75 N
The force in the y-direction;
N+Fsin30° = mg
N+75 sin 30° = 35 × 9.81
N=305.85 N
The force would Tony need to apply at a 30° angle to pull the luggage cart completely off the ground;
N-mg=Fsin30
Fsin30=75 sin 30
Fsin30=375 N
Hence the normal force on the luggage cart and force would Tony need to apply at a 30° angle to pull the luggage cart willl be 305.85 N and 375 N.
To learn more about the friction force refer to the link;
https://brainly.com/question/1714663
#SPJ1
3. A body accelerates constantly at 4m/s² from rest for a distance of 60m. a) How long did it take to reach a distance of 60m? [2] b) Calculate the velocity reached.
Answer:
will you mark brainliest.
which of the following travels the fastest
Answer:
All move at the same speed
Explanation:
because they are all waves of the electromagnetic spectrum and they all travel at the speed of light
(300 000 km/s)
At first the contact force from mud on each wheel is 2000n explain why the wheels will start to sink
The wheels will start to sink due to no friction by the mud to take the grip.
What is frictional force?When an object is moving on a rough surface, it experiences opposition. This opposing force is called the friction force.
Given is the contact force from mud on each wheel is 2000N . Assume the only other force acting on the block is that due to gravity.
The friction force is given by
f = coefficient of friction x Normal or contact force
The mud is soft and viscous. When the wheels are rotating, the car will be sinking in mud. This happens due to no grip. Car tries to get out of the mud, but instead it digs itself.
Car needs grip or frictional force to get out from the mud. There is no friction with the ground. Exactly friction makes car's wheels to displace.
Thus, the wheels of the car sink because of no friction from mud.
Learn more about friction force.
https://brainly.com/question/1714663
#SPJ1
