where is active sea-floor spreading occurring today?mid-ocean ridge: A location where sea floor spreading occurs. The release of magma at these active volcanic sites forms new rocks and rows of mountains.

Answers

Answer 1

Active sea-floor spreading is currently at several mid-ocean ridges including the Mid-Atlantic Ridge, the East Pacific Rise

Mid-ocean ridges are locations where sea-floor spreading is actively occurring, and they are found throughout the world's oceans.The Mid-Atlantic Ridge, the East Pacific Rise, and the Southwest Indian Ridge are some of the most well-known mid-ocean ridges.Sea-floor spreading helps to explain the movement of tectonic plates and the widening of the ocean basins over time.The new oceanic crust created at mid-ocean ridges is typically less dense and younger than the older, more dense crust found at the edges of the ocean basins.This difference in density and age leads to the development of deep oceanic valleys, called oceanic trenches, at the edges of the ocean basins.The interaction between the newly formed oceanic crust and the surrounding older crust drives the movement of the tectonic plates and leads to the creation of earthquakes and volcanic activity.

learn more about mid-ocean ridges here:

https://brainly.com/question/18759008

#SPJ4


Related Questions

what will happen to the freshwater fish if you place it in sea water and why?

Answers

Answer:

Fish will get dehydrated and may die. This is due to osmosis.

Explanation:

<3

what is exponential distribution discrete or continuous?

Answers

Exponential distribution is a continuous probability.

Exponential distribution is a continuous probability distribution used to model the time between two consecutive events in a Poisson process. It is a widely used distribution in statistics, engineering, and various other fields. The exponential distribution is a continuous distribution, which means that it can take on any real number within its domain. The distribution has a positive support and is parameterized by a single parameter, which is the rate parameter.

The exponential distribution is often used to model the time between failures of a system, the time between phone calls at a call center, or the time between customers arriving at a store. It is commonly used in reliability and queueing theory. In summary, exponential distribution is a continuous distribution and is widely used in various fields to model the time between consecutive events.

For more such questions on Exponential discrete

https://brainly.com/question/30426023

#SPJ4

the jet stream is a global pattern of atmospheric movement that influences patterns in local weather. based on the information provided in the weather map, which city shown most recently experienced a drop in temperature?

Answers

The information provided in a weather map showing the jet stream can be used to identify which city has experienced a drop in temperature.  

The jet stream is typically depicted as a narrow band of strong winds at high altitudes, often shown in bright colors or bold lines on weather maps.The position and direction of the jet stream can have a major influence on local weather patterns, as it can carry cold or warm air masses from one region to another.When the jet stream is positioned over a particular region, it can cause temperatures in that area to drop.By analyzing the position and direction of the jet stream on a weather map, it is possible to determine which cities are likely to experience changes in temperature.If the jet stream is flowing from west to east, for example, then cities located to the west of the jet stream will generally experience warmer temperatures, while cities to the east will be cooler.If the jet stream is meandering or fluctuating, then the impacts on local temperatures can be more complex and difficult to predict.

learn more about jet stream here:

https://brainly.in/question/5511177

#SPJ4

how are fracture zones oriented relative to the axis of a mid-ocean ridge?

Answers

Fracture zones are orientated in relation to the mid-ocean ridge's axis because they run perpendicular to it.

A linear feature on the ocean floor called a fracture zone is created by the action of offset mid-ocean ridge axis segments. Fractures zones can be hundreds or even thousands of kilometres long. As a result of plate tectonics, they exist. When a transform fault is active, the lithosphere on each side of it shifts in the opposite direction; this is called strike-slip activity. Since both plate segments are moving in the same direction, the transform faults are seismically inactive, but fracture zones that extend past them provide signs of prior transform fault activity, particularly in the various ages of the crust on either side of the zone Although technically not "fracture zones," numerous transform faults linked with them are frequently regarded to informally as such.

learn more about fracture zones here:

https://brainly.com/question/9201304

#SPJ4

Is evacuation of a city in advance of a hurricane an example of prevention or adjustment?A. PreventionB. Adjustment

Answers

Evacuation of a city in advance of a hurricane is an example of an adjustment rather than a prevention strategy.

Prevention strategies are intended to eliminate or reduce the likelihood of a hazardous event occurring. In the case of a hurricane, prevention strategies might include building sea walls, levees, or other types of infrastructure to protect coastal areas from storm surges. Prevention strategies might also involve developing and enforcing building codes that ensure new construction can withstand hurricane-force winds.

On the other hand, adjustment strategies are intended to minimize the impact of a hazardous event that cannot be prevented. In the case of a hurricane, adjustment strategies might include evacuating residents from low-lying coastal areas before the storm hits, stocking up on emergency supplies, and preparing emergency shelters for those who cannot evacuate. These strategies are intended to minimize the loss of life and property damage that can result from a hurricane, even if prevention strategies have been implemented.

Therefore, evacuating a city in advance of a hurricane is an example of an adjustment strategy, as it is designed to minimize the impact of the hurricane and protect human life, rather than prevent the hurricane itself.

To learn more about Prevention strategies, click here:

https://brainly.com/question/26719231

#SPJ4

1. Which trig function should we use to solve for x in the image below? *
12
H
37
X
Sine (Sin)
O Cosine (Cos)
O Tangent (Tan)

Answers

Cosine is the  trig function should we use to solve for x in the image below. Hence, option B is correct.

What is trigonometric?

Trigonometry is the study of the relationships between the angles and the lengths of the sides of triangles

The six trigonometric functions are sin , cos , tan , cosec , sec and cot

Let the angle be θ, such that

sin θ = opposite / hypotenuse

cos θ = adjacent / hypotenuse

tan θ = opposite / adjacent

tan θ = sin θ / cos θ

cosec θ = 1/sin θ

sec θ = 1/cos θ

cot θ = 1/tan θ

Given data,

Let the triangle be ΔABC , where ∠B = 90°

Let the side AB be x

So , the adjacent side = x

The angle of the triangle ∠A is = 72°

So , θ = 72°

The hypotenuse AC = 8

And , by trigonometric relations , we get

cos θ = adjacent / hypotenuse

Substituting the values in the equations, we get

cos 72° = x / 8

Multiply by 8 on both sides, we get

x = cos 72° × 8

Now, cos 72° = 0.30901

Substituting the value of cos 72° , we get

x = 0.30901 × 8

x = 2.472

Thus, option B is correct.

For more information about trigonometric, click here:

https://brainly.com/question/19144330

#SPJ1

2. The people of Cyprus have strong historical ties to
O Iran and Turkey.
O Israel and Iran.
O Yemen and Israel.
O Turkey and Greece.

Answers

the people of cyprus have a strong historical ties to turkey and greece

state the favorable position of France

Answers

France is a country that is located in Western Europe and is known for its rich culture, history, and diverse geography. Some of the favorable factors that contribute to its position include:

Geographical location: France has a strategic location on the western coast of Europe, making it a central hub for trade and commerce. It has access to the Atlantic Ocean and the Mediterranean Sea, which allows it to be a major player in global maritime trade.
Strong economy: France has a strong and diversified economy, with a well-developed industrial sector and a thriving services sector. It is the sixth-largest economy in the world and a member of the European Union, which provides it with additional economic benefits.
Rich cultural heritage: France is home to some of the world's most famous landmarks and cultural heritage sites, including the Louvre Museum, the Eiffel Tower, Notre-Dame Cathedral, and the Palace of Versailles. This cultural heritage attracts millions of tourists each year, contributing significantly to the country's economy.
High quality of life: France is known for its high quality of life, with excellent healthcare, education, and social services. It is considered one of the most livable countries in Europe and offers a rich cultural experience to its citizens and visitors.
Overall, France's favorable geographical location, strong economy, rich cultural heritage, and high quality of life make it an attractive and desirable place to live, work, and visit.

what property of earthquakes does the richter scale measure? a. intensity. b. magnitude. c. damage and d. destruction caused by the earthquake.

Answers

Option b) magnitude  property of earthquakes does the richter scale measure

An earthquake (also known as a quake, tremor, or temblor) is the shaking of the Earth's surface caused by a sudden release of energy in the Earth's lithosphere, which produces seismic waves. Earthquakes can range in intensity from those that are so minor that they are not felt to those that are powerful enough to propel objects and people into the air, damage critical infrastructure, and devastate entire cities.

The frequency, type, and size of earthquakes experienced in a given area are referred to as its seismic activity. Seismicity at a specific location on Earth is defined as the average rate of seismic energy release per unit volume. Tremor is also used to describe non-earthquake seismic rumbling.

Learn more about  earthquakes

https://brainly.com/question/29500066

#SPJ4

Why are planets more complex than suns?

Answers

The contain a much greater diversity of chemical sub- stances that had ever existed before

How does Augustus's inscription
relate to the claims made in the first
passage?

Answers

Caesar Augustus, also known as Octavian, was the first Roman emperor; he reigned from 27 BC until he died in AD 14.

Who was Caesar Augustus?

The first Roman emperor, Caesar Augustus, often known as Octavian, ruled from 27 BC until they died in 14 AD. He is regarded as one of the greatest leaders in human history and is best known for founding the Roman Principate, the first stage of the Roman Empire.

Assassination schemes were not unfamiliar to Augustus. Thankfully, Augustus avoided the fate that befell his adopted father, Julius Caesar. At the age of 75, Augustus passed away naturally on August 19, 14 CE.

Learn more about Caesar Augustus here:

https://brainly.com/question/13153237

#SPJ1

The measures of the exterior angles of a
hexagon are x, 3x°, 4x°, 5x°, 8xᵒ, and
9x. Find the measure of the largest
exterior angle.

Answers

The measure of the largest exterior angle is 216

How to the measure of the largest exterior angle.

The sum of the measures of the exterior angles of a hexagon is 720°.

Each exterior angle of a regular hexagon is equal in measure, so we can set the measure of each exterior angle equal to x. Therefore:

x + 3x + 4x + 5x + 8x + 9x = 720

30x = 720

x = 24

The measure of each exterior angle is 24°.

To find the largest exterior angle which is 9x

Since x is 24

9 x 24 = 216

Therefore, the largest exterior angle measures 216°.

Learn more about hexagon at:https://brainly.com/question/15424654

#SPJ1

Answer: 108

Explanation:

x+3x+4x+5x+8x+9x=360

30x=360

Then divided by 30 each side

x=12

Then multiply by largest angle

9(12)= 108

3. The text states that fault block mountains are formed when, "pieces of rock are
broken off and driven upward by the force of the shifting plates." Based on this
evidence, what conclusion can you draw about the force of Earth's shifting plates?
A. The force of Earth's shifting plates is somewhat gentle.
B. The force of Earth's shifting plates is loud.
C. The force of Earth's shifting plates is very powerful.
D. The force of Earth's shifting plates is created quickly.iyyiuuh

Answers

Answer:

I believe its C. the force of earths shifting plates is very powerful

The radius of a circle is 6 meters. What is the length of a 120° arc?

Answers

The length of a 120° arc is 12.58m

What is meant by circumference?

The circumference of a circle equals the length around it, however, this cannot be used as a definition of the distance is defined in terms of straight lines, as it is in many beginning lectures. Under these assumptions, the circumference of a circle may be defined as the limit of the perimeters of inscribed regular polygons with an increasing number of sides. Circumference may be used to define both real-world objects and abstract geometric forms.

The circle's overall circumference is = 2πr

The total circle has 360°.  

Given arc has only 120°.

Hence,

= 2×22/7×120/360

= 88/7

=12.58

To learn more about Circumference, click

https://brainly.com/question/29084397

#SPJ1

Explain why the human development gap index values given in figure 3 may be a better measure of development than any of the measures given in figure 2

Answers

The human development gap index values given in figure 3 may be a better measure of development than any of the measures given in figure 2 because these values capture the three critical aspects of life that include decent living, education, and a healthy life.

What is the difference between the HDI and the other markers?

The Human Development Index is designed to measure three critical markers of human lives. These include access to knowledge, a decent lifestyle, and the length/quality of their lives. These markers are more inclusive when compared to the other markers in figure 2 which include birth and death rate, life expectancy, and literary rate.

So, while all of these are considered individually in figure 2, figure 3 captures them as a single measure known as the Human Development Index.

Learn more about the Human Development Index here:

https://brainly.com/question/14391428

#SPJ1

the process in which a denser plate is pushed beneath a less dense plate
Choose matching term
1 Trenches
2 Tectonic Plates
3 Lithosphere
4 Subduction

Answers

Option (D) Subduction zone is the correct option.

It is a process where heavier/denser tectonic plate sinks underneath the lighter/less denser tectonic plate, forcing to melt and rise to the surface in the form of molten rock (known as magma).

The subduction zones are usually formed between convergent plate boundaries. such plates cause great destruction over the surface and often characterized by possessing large numbers/series of volcanoes. The 'Ring of Fire', located in pacific ocean is a classic example.

Hence, the overrun plate is subducted into the mantle and a part of which is melted.  It is generally believed that plates move around over the Asthenosphere.

The Theory of Plate Tectonics was devised by Alfred wegner in the 1920s. He tried to study the earth's dynamic interior structure.    

Learn more about Subduction zones: https://brainly.com/question/3239204

what causes the direction of the wind to change from day to night?

Answers

The direction of the wind can change from day to night due to the difference in the heating of the Earth's surface during these times.

During the day, the sun heats the surface of the Earth, causing the air near the surface to warm and rise. This creates an area of low pressure near the surface, which draws in cooler air from surrounding areas. This movement of air is known as convection, and it often results in wind blowing from cooler areas to warmer areas.

At night, the opposite occurs. The surface of the Earth cools down, and the air near the surface also cools and becomes denser. This creates an area of high pressure near the surface, which pushes air away from the surface and toward areas of lower pressure. This can result in the wind blowing in the opposite direction compared to during the day.

Learn more about wind direction here:

https://brainly.com/question/1420586

#SPJ4

Need help ASAP!!!

Describe what happens at each number in the diagram so to explain a convection current.

Answers

Convection currents are used to describe the movement of warm and cold fluid caused by convection. When a heat source warms a cold fluid, a convection current develops.

What is Convection current?

Natural heat transfer methods like convection currents entail moving energy and heat from one place to another. As an illustration, consider the warmth we feel when holding our hands close to a bonfire. Currents caused by convection are to blame.

Convection is the needs to start of a single or multiphase fluid resulting from the interaction of a fluid's body forces, most frequently density and gravity, and its material property heterogeneity. Differential heating leads to convection currents. The initially chilly fluid warms up and rises. Since warm fluid is less dense, it rises.

To know more about convection current, visit:

https://brainly.com/question/20295382

#SPJ1

Subduction zones occur a what type of plate boundary?

Answers

Subduction zones occur at convergent plate boundaries where two tectonic plates move towards each other.

Subduction zones occur at convergent plate boundaries where two tectonic plates move towards each other. One plate is usually denser than the other and subducts or sinks beneath the other plate, forming a deep trench. The subducting plate is usually an oceanic plate while the overriding plate can be either an oceanic or a continental plate.

As the oceanic plate subducts, it heats up and melts, forming magma. The magma rises and can trigger volcanic eruptions, leading to the formation of volcanic

For more such questions on Plate boundaries

https://brainly.com/question/17795544

#SPJ4

What causes flooding in South Florida

Answers

Answer: As an area is impacted by rising sea-level, land subsidence and increase in ocean elevation can cause flooding in areas not previously threatened by high tides. Flooding can occur during exceptionally high tides within annual fluctuations or when strong prevailing winds pile water against the shoreline.

Explanation:

are the most prominent depositional features created by currents. group of answer choices headlands estuaries beaches spits

Answers

Since ocean waves have a lot of energy, they might cause a lot of erosion. Platforms, arches, and sea stacks are examples of landforms created by erosion.

Sand that has been transported will eventually end up on beaches, spits, or barrier islands.

What kinds of landforms does coastal deposition produce?

Sand dunes, spits, bars, and sandy and pebbled beaches are all coastal landforms created by deposition.

Is a spit deposited or eroded?

deposition A deposition bar or beach landform off the shores of lakes or coasts is known as a spit or sandspit. It develops as a result of longshore drift caused by longshore currents in locations where re-entry takes place, such as the headlands of a cove.

To learn more about ocean waves here:

https://brainly.com/question/350979

#SPJ4

the chicxulub crater is an impact crater buried underneath the yucatán peninsula in mexico. (True or False)

Answers

True. The Chicxulub crater is a massive impact crater beneath Mexico's Yucatán Peninsula.

One of the biggest known impact craters on Earth, the crater is thought to measure 180 kilometres (110 miles) in diameter. It is thought to have been created 66 million years ago by the collision of an asteroid or comet.

At the end of the Cretaceous epoch, the mass extinction of dinosaur species is largely believed to have been caused by this event. The crater is thought to have been produced by an asteroid or comet with a diameter of 10 to 15 kilometres (6 to 9 miles) striking the Earth at a speed of 20 kilometres per second (45,000 mph).

The heat from the collision destroyed the asteroid or comet and melted the rocks, producing a huge cloud of dust that obscured the sun and drastically reduced temperatures.

As a result, there was a period of significant climatic change, which is considered to be one of the main reasons for the mass extinction event.

To learn more about Earth visit:

https://brainly.com/question/15205710

#SPJ4

on this map of the south atlantic, what is the feature that makes a zigzag pattern on the seafloor?

Answers

Faults connecting two regions of plate convergence or divergence are known as transform borders. These continental borders typically have zigzag patterns along their margins.

The science of hydrography analyses, quantifies, and explains the physical characteristics of bodies of water and the surrounding terrain. The U.S. Coast Survey, the forerunner of NOAA, was founded in 1807 by President Thomas Jefferson to carry out hydrographic studies and produce nautical charts of the ports and waterways of the nascent nation. In the past, ships would sound the depth by lowering a lead line from the ship until it struck the bottom and became slack.

Learn more about zigzag here:

https://brainly.com/question/8408280

#SPJ4

what region has about half of the world’s known oil reserves?

Answers

According to current estimates, OPEC Member Countries own 80.4% (1,241.82 billion barrels) of the world's proven oil reserves, with the Middle East holding the majority of these reserves at 67.1% of the OPEC total.

With an estimated 836 billion barrels of proven oil reserves in the Middle East in 2020, the region accounts for nearly half of the world's total proven oil reserves. The Americas retained reserves of more over 560 billion barrels that year, meanwhile.

However, there are also supergiant (>10 billion bbls) oilfields in Brazil, Mexico, Venezuela, Kazakhstan, and Russia. The majority of the world's largest oilfields are found in the Middle East.

learn more about oil reserves

https://brainly.com/question/241564

#SPJ1

if glaciers and ice sheets were to melt completely, to the nearest 10 m, by how many meters would sea level rise?

Answers

If all the glaciers and ice sheets on Earth were to melt completely, the sea level would rise by approximately 70 meters, or 230 feet.

Glaciers and ice sheets are vast bodies of ice that are found in polar regions, high-altitude areas, and at high latitudes. They are formed over thousands of years as snow accumulates and compresses into dense ice. These ice formations are important for regulating the Earth's climate, and they provide freshwater to many parts of the world.

If all of the glaciers and ice sheets on Earth were to melt completely, the sea level would rise by approximately 70 meters (230 feet). This is because the ice on land contains a huge amount of water - in fact, it is estimated that if all of the ice on Earth were to melt, it would raise the sea level by about 216 feet (66 meters). This would inundate many low-lying coastal areas around the world, displacing millions of people and causing billions of dollars in economic damage.

While it is unlikely that all of the ice on Earth will melt in the near future, the effects of melting glaciers and ice sheets are already being felt. The global sea level has risen by about 8 inches (20 cm) since 1880, and it is projected to rise even more in the coming decades. This is primarily due to the melting of glaciers and ice sheets, as well as the thermal expansion of seawater due to global warming.

To learn more about glaciers, click here:

https://brainly.com/question/19709729

#SPJ4

where would you expect terrestrial planets to form in the solar nebula?

Answers

Terrestrial planets are expected to form closer to the sun in the solar nebula.

This is because the temperatures are higher closer to the sun, leading to the formation of rocks and metals. As a result, the building blocks for terrestrial planets, such as silicates and metals, would be more abundant in this region.

Additionally, the gas and dust particles are denser closer to the sun, providing more material for the planets to form. Conversely, the outer regions of the solar nebula are colder and have more gas, leading to the formation of gas giants like Jupiter and Saturn.

The formation of planets depends on many factors, including distance from the star, temperature, and the abundance of building blocks, and the formation of terrestrial planets in the inner regions of the solar nebula is consistent with current theories of planetary formation.

For more questions like Terrestrial click the link below:

https://brainly.com/question/29829522

#SPJ4

what is a fault? multiple choice question. a fracture in bedrock across which no shear displacement has occurred a fracture in bedrock along which sliding has occurred a planar feature that separates one rock type from another a fracture in bedrock

Answers

A fault is defined as: a fracture in bedrock along which sliding has occurred.

A fault is a type of geological structure that forms when rocks break and move along a planar surface. This movement can cause displacement of the rocks and is referred to as shear displacement. Faults can range in size from small cracks to large plate boundaries that extend for thousands of kilometers. The motion along a fault is usually caused by tectonic forces, such as plate movement or stress buildup in the Earth's crust.Faults can be classified into different types based on the direction of motion and the sense of slip, such as strike-slip faults, reverse faults, and normal faults. Faults play a significant role in shaping the Earth's surface and are often associated with earthquakes, which are caused by the release of energy stored in the Earth's crust.In summary, a fault is a fracture in the Earth's crust along which sliding has occurred, caused by tectonic forces and capable of producing earthquakes.

learn more about fault here:

https://brainly.com/question/11096257

#SPJ4

what did the romans call the peninsula spain is located on

Answers

Answer:

Hispania

Hispania, in Roman times, was a region comprising the Iberian Peninsula.

Explanation:

can you answer my geo question please

Regions where the continents or the sea floor are pulling apart are calleda) convection zonesb) subduction zonesc) magnetospheric zonesd) rift zones

Answers

The correct answer is option d) rift zones. Rift zones are regions where the continents or the sea floor are pulling apart due to geological forces.

Divergent limits are another name for them. These zones are brought by by molten material rising from the Earth's mantle.

Rift zones are created as this molten material rises and pushes the continental plates apart. Both the ocean floor and the surface of the land include these zones. They frequently take the shape of broad valleys or hills on land. Linear depressions, ridges, and mountains on the ocean floor are signs of rift zones.

The movement of the tectonic plates on Earth results in the creation of rift zones, which is a natural process. The plates diverge as a result of this movement, creating rift zones.

To learn more about Rift zones visit:

https://brainly.com/question/12702263

#SPJ4

What are air masses and how do they affect weather? HELP ASAP, PLEASE
Answer this question in a short paragraph (4-5 sentences)

Answers

Air masses are large bodies of air that have similar temperature and humidity characteristics. They are formed over large areas and can affect weather by bringing in different temperatures, humidity levels, and precipitation.

How Air masses be described?

Large bodies of air called air masses share comparable properties of temperature and humidity. They are created over broad areas and have the power to change the weather by bringing in various temperatures, degrees of humidity, and precipitation. In contrast, a cold, dry air mass from Canada can bring in chilly temperatures and low humidity levels. As an illustration, a warm, humid air mass from the Gulf of Mexico can bring in warm temperatures and high humidity levels.

Large amounts of air that are typically the same temperature and pressure are called air masses. Different pressures and temperatures characterize unstable air masses. Storms can be produced by unstable air masses, such as this one over the German North Sea.

Learn more about Air at:

https://brainly.com/question/441281

#SPJ1

Answer:

An air mass is a large body of air that has similar temperature and humidity across its whole area. These air masses form over large bodies of land or water, and they are the main determinant of the weather in a given region. Air masses affect the weather by influencing the temperature, humidity, air pressure, and wind. For example, cold air masses can cause winds to blow from the north, resulting in cold and dry weather. Warm air masses on the other hand, bring warm, moist air that can result in more moderate temperatures as well as rain or thunderstorms.

Other Questions
a positive angle less than 360 degrees that is coterminal with -305 is Lots go back 30 years before coral bloaching was as coinmon and not well understood. You are a toierfiat that has coserved that corais tend to bleach in the summer when ocean teinperatures are warmet. Yos design an experimont to inst the typothesis that corals expel the agile when exposed to warmer ocean temperafures. You set up two tanks and put several pieces of cord in eoch tank In one tark, you set the wasor temperature to the avorage waler temperabure on the teel (77 degrees ). in the other tank, you set the temperakute so the higehat waler temperature coserved in the summer (87 degrees). Aher two weeks you count the number of algae left in oach pioce of coral (utsualy oxprossed as number of aboe percm 2 of coraf. You then caloiate an average nimber of algae per coral for each lark and graph hi. (See diagrem for esperimentai designv. Based on your observation and your experimental design, what do you predict will happea? Rocall that you are counting the algae that are left in the coral, not the algae that is expelied. The coral in the Bf degree tark will have lest aigae lett in its tssues after teo meeks The corai in the 67 degroe tark wal have the sume anount of abse ieft in de lissues after two aseks What other perspectives can you find about the debates over nullification and secession from South Carolinas? Which composition of similarity transformations maps polygon ABCD to polygon A'B'C'D'? Why is it difficult to make models of objects in the solar system? What is the y-intercept (b) of the line that passes through (1,1)(2,5) You must solve for slope (m) first.b= what is the name of the structure located inside the cochlea that contains auditory receptors? according to the universal law of gravitation, the force due to gravity is:____. T/F : when two batteries are connected as a series additive power source, they produce a voltage that is less than either of the batteries connected by itself. if 24% of a dna sample is made up of thymine, t, what percentage of the sample is made up of adenine, a? How did Industrialization impact Latin America in a negative way? the inferior, conical end is called the __________. it projects slightly anteroinferiorly toward the left side of the body. dual innervation means that an individual effector que factores sociales incidieron en la aparicion del movimiento realista What will happen to the whole family if Margot doesnt register for the work camp? Why is genetic drift aptly named? a bungee cord with a spring constant of 800 stretches 6 meters at its greatest displacement. how much elastic potential energy does the bungee cord have? the bungee cord has j of elastic potential energy. To accurately isolate cause and effect, experimenters should use A. correlation coefficients. B. case studies. C. naturalistic observation. D.random assignment. The momentum of an object is calculated by? A.multiplying mass by acceleration.B.dividing force by acceleration.C.dividing mass by velocity.D.multiplying mass by velocity. Choose the appropriate method for solving the following systems of equations.