which anion(s) will produce a gas when acid is added? select all that apply. group of answer choices carbonate nitrate phosphate sulfate bromide chloride iodide

To find the concentrations at equilibrium, we need to know the reaction's balanced chemical equation and the equilibrium constant (K) for the reaction.

The concentrations at equilibrium depend on the balanced chemical equation for the reaction and the equilibrium constant (K). The balanced chemical equation allows us to determine the stoichiometry, while the equilibrium constant (K) indicates the ratio of products to reactants at equilibrium.

First, write down the balanced chemical equation and determine the stoichiometry. Then, set up an ICE (Initial, Change, Equilibrium) table using the initial concentrations of reactants and products. Apply the equilibrium constant expression (K) by relating the concentrations of products and reactants at equilibrium, and solve for the unknown equilibrium concentrations.

Without the balanced chemical equation and the equilibrium constant (K), we cannot calculate the specific concentrations at equilibrium.

Learn more about equilibrium constant here:

https://brainly.com/question/31812608

#SPJ11

There are 4.52 × 10²³ molecules in 0.75 moles of oxygen gas.

The molecules in a substance can be calculated by multiplying the number of moles in the substance by Avogadro's number as follows;

no of molecules = no of moles × 6.02 × 10²³

According to this question, there are 0.75 moles of oxygen gas. The number of molecules can be calculated as follows;

no of molecules = 0.75 × 6.02 × 10²³

no of molecules = 4.52 × 10²³ molecules

Learn more about no of molecules at; https://brainly.com/question/11815186

#SPJ1

The freezing point of the solution of 645 g of urea, H₂NCONH₂, dissolved in 980 g of water is -20.39 °C

First, we shall determine the mole in 645 g of urea, H₂NCONH₂. Details below:

Mole = mass / molar mass

Mole of H₂NCONH₂ = 645 g / 60.06

Mole of H₂NCONH₂ = 10.74 moles

Next, we shall obtain the molality of the solution. Details below:

Molality = mole / mass of solvent (in kg)

Molality = 10.74 / 0.98

Molality = 10.96 m

Next, we shall determine the freezing point depression. This is shown below

ΔTf = Kf × molality

ΔTf = 1.86 × 10.96  

ΔTf = 20.39 °C

Finally, we shall obtain the freezing point of the solution. This is show below:

Freezing point of solution = 0 - ΔTf

Freezing point of solution = 0 - 20.39

Freezing point of solution = -20.39 °C

Learn more about freezing point:

https://brainly.com/question/12912530

#SPJ1

To answer the question related to the "America: The Story of Us - Superpower" worksheet, we'll focus on the main events and developments that contributed to the United States becoming a superpower.

1. World War II: The US emerged as a global leader after the victory over Axis powers.
2. Economic Growth: The US experienced rapid industrialization, resulting in increased productivity and wealth.
3. The Marshall Plan: The US aided the recovery of Western Europe, extending its influence.
4. The Cold War: The US engaged in a geopolitical struggle with the Soviet Union, leading to advancements in technology and military capabilities.
5. Cultural Influence: American culture, such as movies and music, became popular worldwide.

These factors contributed to the United States becoming a superpower during the 20th century.

To learn more about Superpower click here: brainly.com/question/16209010

#SPJ11

America's journey to becoming a superpower began in the 1800s with westward expansion and territorial acquisition, and was solidified by its active international role and authoritative domestic dynamics after the World Wars.

The status of the United States as a superpower evolved over time due to a series of historical events. Beginning with the expansion drive in the early 1800s, symbolized by the historical personification of Columbia in John Gast's 'American Progress', the US sought to spread its culture and technology across the continent. This motivated the acquisition of territorial space via the Louisiana Purchase, Texas annexation, and the Mexican-American War.

The world wars played pivotal roles in reshaping the global balance of power. The eruption of these conflicts and America's consequent involvement marked a shift in the nation's foreign policy orientation from isolationism to interventionism. Post World War II, the US emerged as a global superpower, engaging actively in international affairs alongside the USSR.

On a domestic scale, the dynamics of power and authority, manifested in various forms of government, politics, and theoretical perspectives, also influenced America's rise as a global leader.

https://brainly.com/question/32396763

#SPJ11

The structural isomer of 2-methylbutane is butane (c). The structural isomers are the compounds that have the same molecular formula but different arrangements of atoms.

The molecular formula of 2-methylbutane is C5H12.

(a) Propane has the molecular formula C3H8 and is not a structural isomer of 2-methylbutane.

(b) 2-methylpropane also known as isobutane has the molecular formula C4H10 and is not a structural isomer of 2-methylbutane.

(c) Butane has the molecular formula C4H10 and is a structural isomer of 2-methylbutane. The structural formula of butane is CH3CH2CH2CH3, while the structural formula of 2-methylbutane is CH3CH(CH3)CH2CH3.

(d) Pentane has the molecular formula C5H12 but it is not a structural isomer of 2-methylbutane because it has a longer carbon chain.

Therefore, the structural isomer of 2-methylbutane is butane (c).

Learn more about 2-methylbutane  here:

https://brainly.com/question/12984667

#SPJ11

The angular momentum quantum number (l) in a hydrogen atom determines several properties of the orbitals. Firstly, it determines the shape of the orbital.

Orbitals with different angular momentum quantum numbers have different shapes, such as s, p, d, and f orbitals. Secondly, it determines the possible orientation of the orbital in space. Orbitals with higher angular momentum quantum numbers have more complex orientations. Thirdly, it determines the energy of the orbital. Orbitals with higher angular momentum quantum numbers have higher energies, which affects the overall energy level of the atom. Finally, it also indirectly determines the possible number of electrons that can occupy a particular orbital, as the Pauli exclusion principle and the Aufbau principle dictate that each orbital can only hold a maximum of two electrons with opposite spins. Therefore, the angular momentum quantum number plays a crucial role in determining the properties and behavior of electrons in hydrogen atoms.

To learn more about momentum click here: brainly.com/question/30677308

#SPJ11

The correct option is B. The precipitate that forms when Na2CO3(aq) and BaCl2(aq) are mixed is BaCO3. This is because the reactants undergo a double displacement reaction, where the positive ions switch places.

The precipitate that forms when Na2CO3(aq) and BaCl2(aq) are mixed is BaCO3. This is because the reactants undergo a double displacement reaction, where the positive ions switch places. The resulting products are NaCl(aq) and BaCO3(s), where the solid BaCO3 precipitates out of the solution. In order to determine which product is the precipitate, we need to look for the product that is insoluble in water. BaCO3 fits this description and is therefore the correct answer. It's important to note that in order for a precipitate to form, the reactants must be mixed in the correct proportions and at the appropriate temperature and pressure.

To know more about precipitate visit: https://brainly.com/question/30904755

#SPJ11

A) The expression for the reaction rate law can be written as: Rate=k[NO2][F2]

B) To calculate the value for the rate constant, we need to choose any set of concentrations and corresponding rates from the data provided and substitute them in the rate law expression. Let's use the first set of concentrations and rates:

Rate = k[NO2][F2]

0.026 mol L^-1 s^-1 = k(0.1 mol L^-1)(0.1 mol L^-1)

k = 0.026 mol L^-1 s^-1 / (0.1 mol L^-1)(0.1 mol L^-1)

k = 2.6 L^2 mol^-2 s^-1

C) The overall order of the reaction is the sum of the orders with respect to each reactant. In this case, the reaction rate law is first order with respect to both [NO2] and [F2]. Therefore, the overall order of the reaction is 1 + 1 = 2.

In summary, the expression for the reaction rate law is Rate=k[NO2][F2], the rate constant (k) was calculated to be 2.6 L^2 mol^-2 s^-1 using the initial rate data, and the overall order of the reaction is 2 since it is the sum of the orders with respect to each reactant.

To learn more about reaction click here: brainly.com/question/30464598

#SPJ11

The name of the complex ion ZnCl2(en)2 is "dichloridobis(ethane-1,2-diamine)zinc(II)".

Here's how the name is derived:

The complex contains the metal ion zinc, which has a +2 oxidation state, so we use the Roman numeral (II) to indicate this in the name.

The complex contains two chloride ions, which are named as "dichlorido" since there are two of them.

The complex also contains two molecules of ethane-1,2-diamine, which is abbreviated as "en". The two en ligands are named using the prefix "bis".

Therefore, the complete name of the complex ion is "dichloridobis(ethane-1,2-diamine)zinc(II)".

Learn more about ZnCl2(en)2 here:

https://brainly.com/question/29221322

#SPJ11

- Therefore the concentration of the HCl in the solution whose pH – 3 is 0.001 M.

The expected wavelength for light composed of photons produced by an n=3 to n=1 transition in a hydrogen atom is approximately 656.3 nanometers.

The formula to calculate the wavelength of light emitted during a transition in a hydrogen atom is given by:

λ = hc/ΔE

where λ is the wavelength of the emitted light, h is the Planck constant, c is the speed of light, and ΔE is the energy difference between the initial and final states of the transition.

For an n=3 to n=1 transition in a hydrogen atom, the energy difference can be calculated using the formula:

ΔE = -13.6 (1/1^2 - 1/3^2) eV

where -13.6 eV is the ionization energy of hydrogen. Plugging in the values, we get:

ΔE = -10.2 eV

Converting this energy to joules and plugging into the wavelength formula, we get:

λ = hc/ΔE = (6.626 x 10^-34 J.s) (3 x 10^8 m/s) / (-10.2 x 1.6 x 10^-19 J) = 656.3 nm

Therefore, the expected wavelength for light composed of photons produced by an n=3 to n=1 transition in a hydrogen atom is approximately 656.3 nanometers.

To know more about hydrogen atom visit:

https://brainly.com/question/30886690

#SPJ11

Among the options, the compounds likely to form are:

The formation of these compounds is possible because strontium (Sr) is a metal with a positive charge, and chlorine (Cl) and iodine (I) are nonmetals with negative charges. Strontium can lose two electrons to form Sr²⁺, and it can also lose three electrons to form Sr³⁺.

Chlorine can gain one electron to form Cl⁻, and iodine can gain one electron to form I⁻. Therefore, strontium can combine with chlorine to form SrCl₂ and with iodine to form SrI₃.

Find out more on compounds here: https://brainly.com/question/29108029

#SPJ1

17.3 L is the volume of 201 g of mercury vapor at 822 K and 0.512 atm.

To solve this problem, we can use the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. We can rearrange this equation to solve for the volume:

V = nRT/P

First, we need to find the number of moles of Hg atoms in 201 g of mercury vapor. We can use the molar mass of mercury (200.59 g/mol) to convert from grams to moles:

n = 201 g / 200.59 g/mol = 1.001 mol

Next, we need to convert the temperature from Celsius to Kelvin:

T = 822 K

Finally, we can plug in the values for n, R (0.08206 L·atm/mol·K), P (0.512 atm), and T into the equation:

V = (1.001 mol) x (0.08206 L·atm/mol·K) x (822 K) / (0.512 atm) = 17.3 L

Therefore, the answer is E) 17.3 L.

To know more about Mercury vapor visit:

https://brainly.com/question/28437222
#SPJ11

The electron geometry (eg) of CH+13 can be determined using the VSEPR theory. VSEPR stands for Valence Shell Electron Pair Repulsion, which is a theory used to predict the shape of molecules. In CH+13, there are a total of five valence electrons, with one electron being removed to form the positive ion. The five valence electrons of CH+13 are arranged in a trigonal bipyramidal shape. The electron geometry of CH+13 is therefore trigonal bipyramidal.

The molecular geometry (mg) of CH+13 is determined by looking at the arrangement of atoms in the molecule. In CH+13, there are five atoms bonded to the central carbon atom, which is positively charged. The five atoms are arranged in a trigonal bipyramidal shape, with three atoms in the equatorial plane and two atoms in the axial positions. The molecular geometry of CH+13 is therefore also trigonal bipyramidal.

To learn more about geometry click here: brainly.com/question/27921706

#SPJ11

In a weak acid titration with a strong base, the major species in solution can be determined by examining the pH changes during the titration process. Initially, the weak acid, such as HF in this case, is the major species in solution.

As the strong base, such as KOH, is added, it reacts with the weak acid to form the conjugate base of the acid, in this case F-, and water. Eventually, the equivalence point is reached, where all of the weak acid has been neutralized by the strong base, resulting in a solution containing only the conjugate base and water. Therefore, in the given scenario, the major species in solution would be HF initially, followed by a mixture of F- and water at the equivalence point.

In a weak acid titration with a strong base, the major species present are the weak acid, the conjugate base, and the strong base's counter ion. In this case, the weak acid is HF (hydrofluoric acid), and the strong base is KOH (potassium hydroxide). When 1 mol of KOH is added to 1.0 L of 0.6 M HF solution, the KOH neutralizes the HF, forming H2O (water) and KF (potassium fluoride). The major species in the solution are F- (fluoride ions, the conjugate base), K+ (potassium ions, the strong base's counter ion), and any unreacted HF.

To learn more about  Titration, click here:

https://brainly.com/question/31870069

#SPJ11

The reaction that occurs when you add NaOH to a buffer solution depends on the specific components of the buffer. However, one possible reaction is [tex]HAc + OH^- < -- > Ac^- + H_2O[/tex]. The correct answer is option c.


When you add NaOH (sodium hydroxide) to a buffer solution containing the acetate ion ([tex]Ac^-[/tex]) and acetic acid (HAc), the reaction that occurs is the neutralization of the acidic component, HAc, by the hydroxide ion ([tex]OH^-[/tex]). This neutralization reaction results in the formation of the acetate ion  ([tex]Ac^-[/tex]) and water (H[tex]_2[/tex]O). The reaction can be represented as follows:

[tex]HAc + OH^- < -- > Ac^- + H_2O[/tex]

In this reaction, the hydroxide ion ([tex]OH^-[/tex]) from NaOH combines with the hydrogen ion ([tex]H^+[/tex]) from acetic acid (HAc) to form water (H[tex]_2[/tex]O), while the acetate ion ([tex]Ac^-[/tex]) is produced as a result.

The other options listed do not accurately represent the reaction that occurs when NaOH is added to the buffer solution.

Therefore, the correct answer is option c.

Learn more on buffer solutions:

https://brainly.com/question/8676275

#SPJ11

When hydrochloric acid is diluted in water, the beaker feels hot as Dissolving the solute is an exothermic process. Therefore, the correct option is option D.

Thermal expansions These are exothermic reactions because the energy leaves the reaction and diffuses into the environment. The energy is often transported as heat energy, which raises the temperature of the reaction mixture plus its surroundings. The temperature rise is noted using a thermometer. When hydrochloric acid is diluted in water, the beaker feels hot as Dissolving the solute is an exothermic process.

Therefore, the correct option is option D.

To know more about exothermic process, here:

https://brainly.com/question/12707927

#SPJ1

a) the electric field strength required to suspend the plastic bead in air is 4.29×10^5 N/C.
b) The direction of the electric field required to suspend the bead in air is up

Explanation:

a) To find the electric field required to suspend the plastic bead in air, we can use the formula:

E = F/q

where F is the force of gravity on the bead, and q is the charge on the bead. The force of gravity on the bead can be found using:

F = mg

where m is the mass of the bead and g is the acceleration due to gravity (9.81 m/s^2). Substituting in the given values, we get:

F = (7.0×10^-2 g)(9.81 m/s^2) = 6.87×10^-3 N

Next, we can use the fact that the electric force on the bead due to the excess electrons is equal in magnitude to the force of gravity:

Felectric = Fgravity

We can find the electric force using:

Felectric = qE

where E is the electric field strength. Substituting in the given values, we get:

Felectric = (1.0×10^10 e)(1.60×10^-19 C/e)(E) = 1.60×10^-8 E N

Setting these two forces equal, we get:

1.60×10^-8 E N = 6.87×10^-3 N

Solving for E, we get:

E = 4.29×10^5 N/C

So the electric field strength required to suspend the plastic bead in air is 4.29×10^5 N/C.

b) The direction of the electric field required to suspend the bead in air is up, since the electric force on the bead due to the excess electrons is repulsive, and needs to balance out the force of gravity pulling the bead down.

Visit here to learn more about electric field brainly.com/question/30544719
#SPJ11

A control group would be a good addition to this experiment. An experimental group that does not receive the same care as the experimental group is referred to as a control group.

In this scenario, a can without radiation would serve as the control group and a can with radiation as the experimental group. This would enable us to compare the outcomes of the two groups and determine whether the radiation affected the temperature in any way. Increasing the frequency of the temperature measurements would be another method to enhance this experiment.

We may take temperature readings every minute or every five minutes instead of every fifteen minutes. We would be able to track the temperature changes more precisely and receive more exact data as a result.

Learn more about radiation at:

https://brainly.com/question/13934832

#SPJ1

The name of the compound  S₃N₄ is trisulfur tetranitride.

This compound is made up of three atoms of sulfur and four atoms of nitrogen. It is a covalent compound, meaning that the atoms are held together by sharing electrons. Trisulfur tetranitride is a highly reactive compound and can be used as a precursor to other nitrogen-sulfur compounds.

It has also been studied for its potential applications in electronic devices and as a possible high-energy density material. Overall, trisulfur tetranitride is an important compound in the field of chemistry and has many potential uses in various industries.

More on trisulfur tetranitride: https://brainly.com/question/14496651

#SPJ11

The amount of heat required to vaporize 500g of the liquid at its boiling point is 7436.40 kJ.

To calculate the amount of heat required to vaporize 500g of the liquid, we need to use the following formula:

Q = m × ΔHvap

Where Q is the amount of heat required in kilojoules (kJ), m is the mass of the liquid in grams (g), and ΔHvap is the enthalpy of vaporization in kilojoules per mole (kJ/mol).

First, we need to convert the mass of the liquid from grams to moles:

moles = mass / molecular weight
moles = 500g / 27.5 g/mol
moles = 18.18 mol

Next, we can use the enthalpy of vaporization to calculate the amount of heat required to vaporize one mole of the liquid:

Q = ΔHvap × moles
Q = 22.5 kJ/mol × 18.18 mol
Q = 409.1 kJ

Finally, we can use the amount of heat required for one mole to find the amount of heat required for 500g:

Q = 409.1 kJ / mol × 18.18 mol
Q = 7436.4 kJ

Rounding up to the second decimal place, the amount of heat required to vaporize 500g of the liquid at its boiling point is 7436.40 kJ.

Visit here to learn more about kilojoules brainly.com/question/2954567

#SPJ11

The two statements that are true regarding the memory module labeled pc2-6400 are:

The module has a peak transfer rate of 6400 MB/s: The term "pc2-6400" indicates the peak transfer rate of the memory module. Here, "pc2" refers to the type of memory technology (DDR2), and "6400" indicates the peak transfer rate in megabytes per second (MB/s).

The module is compatible with a motherboard that supports DDR2 RAM: Since the memory module is labeled as DDR2, it is compatible only with motherboards that support DDR2 RAM. PC2-6400 indicates that the memory has a peak transfer rate of 6400 MB/s, which is a standard for DDR2 RAM.

earn more about memory here:

https://brainly.com/question/14829385

#SPJ11

The correct answer is (B) 58.4%.To determine the percentage of KClO3 in the original mixture, we need to use stoichiometry and the ideal gas law. From the balanced equation for the decomposition of KClO3, we know that 2 moles of KClO3 produce 3 moles of O2.

Therefore, the number of moles of O2 generated from the given volume at STP can be used to calculate the number of moles of KClO3 that decomposed. Using the mass of the mixture and the molar masses of KClO3 and KCl, we can then determine the mass of KClO3 in the mixture and the percentage of KClO3 in the original mixture.

Solving for x, the mass of KClO3 in the mixture, we get x = 0.733 g. Then, the number of moles of KClO3 can be calculated as Moles of KClO3 = x / 122.55 g/mol, and the number of moles of KCl can be calculated as Moles of KCl = (1.34 g - x) / 74.55 g/mol.

Next, we can use stoichiometry to calculate the number of moles of O2 that would be generated if all of the KClO3 in the mixture were decomposed. Since 2 moles of KClO3 produce 3 moles of O2, the number of moles of O2 produced is 1.5 times the number of moles of KClO3. Using the ideal gas law, we can then calculate the volume of O2 at STP.

Substituting the calculated values into the equation for the percentage of KClO3 in the original mixture, we get (0.133 L / 22.4 L/mol) / [(0.133 L / 22.4 L/mol) + ((1.34 g - x) / 74.55 g/mol)] * 100%. Solving for x, we get x = 0.733 g, which corresponds to a percentage of 58.4% KClO3 in the original mixture. Therefore, the correct answer is (B) 58.4%.

Learn more about decomposition here:

https://brainly.com/question/24905694

#SPJ11

The amount of heat released in kJ when 75 grams of phosphorus react with excess chlorine is 858.848 kJ.

Moles of P = mass of P / molar mass of P = 75 g / 30.97 g/mol = 2.42 moles

From the balanced chemical equation, 2 moles of P react with 5 moles of Cl2 to form 2 moles of PCl5.

Moles of PCl5 = (2.42 moles P / 2 moles PCl5) x (2 moles PCl5 / 5 moles Cl2) = 0.968 moles

Heat released = moles of PCl5 x AH° = 0.968 moles x (-886 kJ/mol) = 858.848 kJ

In other words, the amount of heat released in kJ when 75 grams of phosphorus react with excess chlorine is approximately 858.848 kJ.

More on heat of reactions can be found here: https://brainly.com/question/30464598

#SPJ1

Answer:

B) 2.86 atm

In order to calculate this, you have to use the Henry's law which is:

C= kP

C = concentration of a dissolved gas

k = Henry's Law constant

P = partial pressure of the gas

C = kP

1.05x10^-5 M = k(0.00030 atm)

When we solve for k, we get:

k = (1.05x10^-5 M) / (0.00030 atm)

k = 3.50x10^-2 M/atm

We can now apply Henry's rule to calculate the partial pressure of carbon dioxide that will result in a concentration of 100.0 mg/L (or 0.1 g/L) in water:

0.1 g/L = (3.50x10^-2 M/atm)P

When we convert units, we get:

0.1 g/L = (3.50x10^-2 mol/L)P

P = (0.1 g/L) / (3.50x10^-2 mol/L)

P = 2.86 atm

Carbon dioxide, also known as R-744, is a natural refrigerant that has been gaining attention in recent years due to its low environmental impact and energy efficiency.

However, despite its advantages, it is unlikely to be widely adopted as a refrigerant due to the difficulty in manufacturing it. Carbon dioxide requires high-pressure equipment and specialized manufacturing processes, which can be expensive and time-consuming. Additionally, the production of carbon dioxide refrigerants requires a high level of purity, which adds to the cost. This makes it less attractive for manufacturers looking to produce refrigerants on a large scale. Despite these challenges, there is still interest in using carbon dioxide as a refrigerant, particularly in niche applications such as commercial refrigeration, air conditioning, and heat pumps.

To learn more about natural click here:

brainly.com/question/30406208

#SPJ11

When two reactant molecules possessing the necessary threshold energy collide with each other, they form an unstable activated complex or transition state. The given plot shows the energy diagram of an exothermic reaction.

In an exothermic reaction, the energy of the reactants is less than that of the products. The energy hump corresponds to the energy barrier existing between the reactants and products. The energy acquired by the reactant molecules to reach the level of threshold energy is called the activation energy.

1. 1st column on the lower left side = Reactants

2. Above that 2nd column = Eₐ = Activation energy of forward reaction

3. Above that 3rd column = Transition state

4. On the right upper part, 4th column = Enthalpy change ΔH

5. On the right lower part, 5th column = Products

To know more about energy diagram, visit;

https://brainly.com/question/18259253

#SPJ1

The liquid described, containing 60% sugar and 40% water throughout its composition, is called a homogeneous mixture.

A homogeneous mixture is a type of mixture where the components are uniformly distributed throughout the mixture, resulting in a uniform composition and appearance. In a homogeneous mixture, the components are not visibly distinct and cannot be easily separated by physical means, such as filtering or settling.

Homogeneous mixtures can be either single-phase or multi-phase, depending on the number of components present and the nature of their interactions. Examples of homogeneous mixtures include solutions (such as saltwater), alloys (such as brass), and some types of gels and emulsions.

Visit here to learn more about homogeneous mixture brainly.com/question/30587533

#SPJ11

The mass percent of chlorine in CCl3F is 77.4%.

The molar mass of CCl3F is:

To calculate the mass percent of chlorine in CCl3F (Freon-11), we need to determine the molar mass of chlorine and the molar mass of the entire compound.

CCl3F = 1xC + 3xCl + 1xF = 1x12.01 + 3x35.45 + 1x18.99 = 137.37 g/mol

The mass percent of chlorine in CCl3F can be calculated as:

Mass of chlorine / Mass of CCl3F x 100%

Mass of chlorine = 3 x atomic mass of Cl = 3 x 35.45 = 106.35 g

Mass of CCl3F = 137.37 g

Mass percent of chlorine in CCl3F = 106.35 g / 137.37 g x 100% = 77.4%

Therefore, the mass percent of chlorine in CCl3F is 77.4%.

Learn more about chlorine  here:

https://brainly.com/question/19460448

#SPJ11

The resulting pressure of the gas above the liquid, given that the valve at the bottom of the container is opened, allowing all the liquid to be removed is 0.158 atm

From the question given above, the following data were obtained

Using the Boyle's law equation, we can obtain the new pressure of the gas as follow:

P₁V₁ = P₂V₂

1.58 × 0.125  = P₂ × 1.25

0.1975 = P₂ × 1.25

Divide both sides by 1.25

P₂ = 0.1975 / 1.25

P₂ = 0.158 atm

Thus, we can conclude the resulting pressure of the gas is 0.158 atm

Learn more about pressure:

https://brainly.com/question/15343985

#SPJ1