Which compound will precipitate when solutions of iron(ii) acetate, fe(c2h3o2)2, and potassium iodide (ki) are mixed?.

Answer:

D. To restore the population of a species

Explanation:

Captive-breeding programs breed endangered species in zoos and other facilities to build a healthy population of the animals. Species-survival plans coordinate with zoos around the world to bring species together for breeding that ensures genetic diversity.

The variance in the US continental region is brought on by the shift in daytime and nighttime weather patterns.

Cold, dry, and stable air masses are found in the continental polar (cP) or continental arctic (cA) regions. Radiative cooling causes these air masses to form over northern Canada and Alaska. They travel south, then east via the Plains and the Rockies.

During the winter, a continental polar air mass can develop over the land. It comes from northern Canada or Alaska in the Northern Hemisphere. It transports dry weather to the United States as it goes south. Low humidity and temperature are both present.

These factors contributed to the polar air mass:

During the colder months of the year, continental polar air typically forms over vast land masses.

A cool breeze blows across the upper section of the area, while a warm breeze blows through the lower part.

To learn more about continental polar air mass from given link

https://brainly.com/question/22790966

#SPJ4

The enthalpy change for the chemical reaction in which 2400kJ per mole of reactants is absorbed when bonds are broken and 3200kJ per mole of products is released when bonds are made is  -800 kJ.

The enthalpy change of a chemical reaction that takes place at constant pressure is known as the Heat of Reaction (also known as the Enthalpy of Reaction). It is a thermodynamic unit of measurement that can be used to determine how much energy is released or created per mole during a reaction.

Enthalpy change = sum of bond energies of reactants - sum of bond energies of products

Enthalpy change of the reaction = 2400 - 3200 kJ

Enthalpy change of the reaction = -800 kJ

Learn more about enthalpy change at: https://brainly.com/question/28074937

#SPJ1

Diphosphorus trichloride has a phosphorus content of 22.554%. Phosphorus is indeed a mineral that can be found in many foods naturally as well as in supplements. It has a number of functions in the body. It is a crucial component of cell membranes, bones, and teeth.

Frequently, high phosphorus does not result in any symptoms. On the other hand, an excess of phosphorous in your blood can result in calcium loss from your bones and other body tissues, resulting in low calcium levels (also called hypocalcemia). Low calcium levels do result in symptoms like: tense muscles

Severe vomiting & diarrhea, both of which are characterized as "burning," "luminescent," and with a garlic-like odor, are frequently brought on by ingestion of basic white or yellow phosphorus. Dysrhythmias, comas, hypotension, and even death are potential additional symptoms of severe poisoning.

To know more about phosphorous visit:

https://brainly.com/question/22292769

#SPJ1

Conjugated dienes are two double bonds separated by a single bond. Nonconjugated Dienes are two double bonds are separated by more than one single bond.

In general , p-orbitals were used to identify conjugation. These p-orbitals are significantly used to make double bonds, so a lone pair  is present in p-orbitals if it is conjugate . Hence, To be a conjugated atom it must have three or more p-orbitals in a row.

If we talk about Conjugated system, the covalent chemical compound, a group or chain of atoms that carries valence electrons  and they are not engaged in single-bond formation so they modify the behavior's of each other atoms present in the vicinity .

To learn more about Conjugated system , here

brainly.com/question/15047805

#SPJ4

Using  Speed, distance and time relation, the distance is 400 kilometers.

Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.

The International System of Units defines a metre as the distance unit. It's interesting to note that many other derived units or quantities, such as volume, area, acceleration, and speed, may be constructed using this as the basic unit and a few formulae.

20 kilometers per hour is the speed per half-hour.

⇒ Speed in kilometers per hour: 40 × 2 = 80

Distance x time = speed

Distance = Time × Speed

= 80 × 5

= 400 miles

To learn more about Speed, distance and time from given link

https://brainly.com/question/26046491

#SPJ4

The word particle comes from the fact that a neutron, which is what is found in the nucleus of an atom, has no electrical charge and is therefore electrically neutral.

Describe neutrons.

To learn more about neutrons refer to:

brainly.com/question/18012303

#SPJ4

Two species can directly compete for the same resource when they are in contact with one another such as for food, space, mates, or water.

One example of direct competition is two lions competing for a mate.

Competition can be described as the direct or indirect contact of organisms that results in a change in fitness when the organisms share a resource.

Competition is most commonly thought of as the interaction of individuals that compete for a common resource that is in limited supply.

Individuals who directly compete with one another for the same resource are said to be in direct competition.

Some examples of competition are:

Learn more about direct competition at: https://brainly.com/question/17143746

#SPJ1

Answer:

Genetic code consists of a sequence of nucleotides which are the building blocks of DNA. Each nucleotide contains a four-letter code, which is used to construct proteins in the organism. These proteins are responsible for the physical and behavioral traits of the organism. Changes in the genetic code can occur through mutation, which is when a mistake is made in the nucleotide sequence during DNA replication. This can lead to changes in the proteins and the traits of the organism. Some of these changes can be beneficial, while others can be harmful. Ultimately, the effects of these genetic changes depend on the environment in which the organism lives and the type of change that has occurred.

The order of solubility from most to least can be given as carbonate>sulfate>iodate>chloride. Carbonates are the most soluble.

The maximum amount of a material that may dissolve in another is known as its solubility. A saturated solution is created when a solvent can dissolve its maximum quantity of solute before reaching equilibrium. A supersaturated solution results when extra solutes are dissolved past its equilibrium solubility point under specific circumstances.

Dissolution is the action of disintegrating. In contrast to the speed of solution, which specifies how rapidly a molecule dissolves in a solvent, solubility is not a feature of matter. The order of solubility from most to least can be given as carbonate>sulfate>iodate>chloride.

Therefore,  the order of solubility from most to least can be given as carbonate>sulfate>iodate>chloride.

To know more about solubility, here:

https://brainly.com/question/14366471

#SPJ1

The main minerals that may contribute to hypertension when consumed in excess include sodium, potassium, and calcium.

Eating too much of certain minerals can lead to hypertension, a condition that can cause high blood pressure.

Too much sodium can cause the body to retain water, leading to increased blood pressure.

Potassium can also affect blood pressure, as it influences the amount of sodium in the body.

Calcium is important for regulating the contraction and relaxation of muscles, including those of the heart. When calcium levels become too high or excess, it may lead to hypertension.

Therefore, it is important to keep an eye on your mineral intake to ensure that it remains within healthy limits.

To learn more about hypertension, click here:

https://brainly.com/question/29799896

#SPJ4

From september 1 to june 1, the number of daylight hours observed each day in new york state will be option A: Decrease only.

The number of daylight hours observed each day in New York State will go down. This is due to the earth's tilt on its axis and its orbit around the sun, which causes the amount of daylight to change throughout the year.

In the northern hemisphere, the fall and winter months have shorter daylight hours than the spring and summer months. On September 1st, it is the start of fall, which means the days will start getting shorter.

Therefore, As we move towards June 1st, the days will continue to get shorter until we reach the shortest daylight hours of the year on the winter solstice (around December 21st or 22nd), after that the days will start getting longer again.

Learn more about daylight  from

https://brainly.com/question/3766812

#SPJ1

Answer:45000

Explanation:

If Rutherford's idea that electrons radiate energy while orbiting around the nucleus was true, it would have strengthened the idea of the Bohr model of the atom, which also proposed that electrons occupy specific energy levels or orbitals around the nucleus.

This model was developed by Niels Bohr in 1913 and was based on the idea that electrons move in quantized orbits around the nucleus, similar to how planets orbit the sun.

The Bohr model was able to explain the observed spectral lines of hydrogen and was able to predict the energy levels of other atoms. Thus, the Rutherford's planetary model and the Bohr model would have been consistent with each other.

Find out more on Rutherford's experiments here: https://brainly.com/question/14996029

#SPJ1

The name given to the substance such as metal hydroxides and metal oxides that can nuetralise acids is Base or Alkali.

A base is a proton-accepting molecule or ion, according to chemists. That makes OH- a base. They continue to refer to bases dissolved in water as "alkali." Sodium hydroxide, for example, dissolves in water and separates into Na+ and OH-ions. The result is an alkali, and it is a source of the base OH-.

Some properties of bases are given below:

Learn more about bases here:

https://brainly.com/question/9836972

A drop taken from the top of a solution of salt and water will not be identical to a drop taken from the bottom of the mixture because the salt and water molecules will be distributed differently throughout the mixture.

What is a solution?

A solution is a homogeneous mixture of two or more substances. In a solution, the solute, which is the substance that is dissolved, is evenly dispersed throughout the solvent, which is the substance that the solute is dissolved in.

Salt is denser than water, so it will tend to settle to the bottom of the mixture over time. This means that a drop taken from the top of the mixture will have a lower concentration of salt than a drop taken from the bottom.

Additionally, due to the process of diffusion, the salt molecules will tend to move from areas of higher concentration to areas of lower concentration, so the concentration of salt will be different at different points throughout the mixture. Therefore, a drop taken from the top will have less salt concentration than a drop taken from the bottom.

Therefore, as the salt and water molecules are distributed differently throughout the mixture a drop from the solution will be identical to that of the bottom of the jar.

To learn more about solutions from the given link:

https://brainly.com/question/25326161

#SPJ4

TLC method is mostly often used for the qualitative as well as quantitative sample analysis.

TLC (Thin layer chromatography) is an affinity based method which is used to separate the compounds present in a mixture. TLC is a highly versatile separation method which is widely used for both qualitative as well as quantitative sample analysis. It can be used to analyze the virtually any substance class, including steroids, alkaloids, lipids, nucleotides, glycosides, carbohydrates, as well as fatty acids.

Thin Layer Chromatography is that technique which will be used to isolate the non-volatile mixtures. The experiment is conducted on a sheet of the aluminum foil, glass or plastic which is coated with a thin layer of adsorbent material. The material which is usually used i.e aluminum oxide, silica gel or cellulose. After completion of the separation, each component will appears as spots and separated vertically.

To know more about TLC here

https://brainly.com/question/13609435

#SPJ4

The recycling plant needs to separate two types of plastic: ABS, d = 1.15 g/mL and PET, d = 1.35 g/mL. No, the two plastics will not be separated because both types would sink when added to the solution of NaCI. Therefore, option A is correct.

The term density is defined as the ration of mass and volume. It is represented by the formula as follows:

Density = Mass / Volume

If an object is denser than NaCl solution, then it will sink when placed in solution, and if it is less dense than NaCl solution, it will float.

The densities of both ABS and PET are more than the density of NaCl solution, Therefore both will sink in the NaCl solution.

Thus, option A is correct.

To learn more about the density, follow the link;

https://brainly.com/question/29775886

#SPJ1

Answer: Under normal conditions. Each cell in the human body has 23 pairs of chromosomes (46 in total). Half come from the mother and half from the father.

Explanation: Chromosomes are transferred in pairs.

Under normal conditions. Each cell in the human body has 23 pairs of chromosomes (46 in total). Half come from the mother and half from the father.

Two of these chromosomes (the X and the Y chromosome) determine one’s sex as male or female. They are called sex chromosomes:

• Females have 2 X chromosomes.

• Males have 1 X and 1 Y chromosome.

The mother gives an X chromosome to the child. The father may contribute either X or Y. The chromosome from the father determines if the baby is born male or female.

The remaining chromosomes are called autosomal chromosomes (22 pairs).

1 chromosome from mother+ 1 chromosome from father+ 22 pair autosomal chromosomes= 46

Answer:

We inherit a set of 23 chromosomes from our mothers and another set of 23 from our fathers. One of those pairs are the chromosomes that determine the biological sex of a child – girls have an XX pair and boys have an XY pair, with very rare exceptions in certain disorders.

Gradually graduated cylinders are available in a variety of sizes, or volume capacities, and, like a measuring cup, are used to determine volume by pouring liquid to the cylinder and comparing the liquid level to the graduated scale. The volume that was measured is the same as the amount of liquid that was put inside the cylinder.

The Complete Question is  graduated cylinders.

To Learn more About  graduated cylinders refer To:

https://brainly.com/question/24869562

#SPJ1

Gradually graduated cylinders are available in a range of diameters, or volume capacities, and, like a measuring cup, are used to calculate volume by pouring liquid into the cylinder and comparing the liquid level to the graduated scale.

The complete question is,

Graduated cylinders represent .

To learn more  about graded cylinders refer to:

brainly.com/question/24869562

#SPJ1

Answer:

both

Explanation:

The three scientists' measurements are both accurate and precise.

Accuracy refers to how close a measurement is to the true value, and precision refers to how close multiple measurements are to each other.

In this case, the measurements are accurate because they are all very close to the true value of the standard meter bar, which is defined as 1 meter.

The measurements are precise because all the measurements are very close to each other. They are all within 0.01 m of each other, indicating that the scientists are able to consistently measure the same length, indicating that they are precise in their measurements.

It's worth noting that, even though the measurements are accurate and precise, it's still possible to have a small measurement error, this is because the true value of the standard meter is not 1.09 m or 1.08 m, but the International System of Units defined it to be exactly 1m, and the difference between the measurements and the true value is very small.

The measurements provided by the three scientists are precise but not accurate.

The measurements provided by the three scientists can be analyzed in terms of accuracy and precision. Accuracy refers to how close the measured values are to the true value, while precision refers to how close the measured values are to each other. In this case, the measured values are 1.09 m, 1.09 m, and 1.08 m. These measurements are not accurate because they are not equal to the true value of a standard meter bar, which is 1.00 m. However, they are precise because they are very close to each other.

Although the measurements are not accurate, they are consistent with each other, indicating precision in the measurements. In scientific experiments, it is important to have both accuracy and precision. Accurate measurements ensure that the measurement is close to the true value, while precise measurements establish consistency and reliability in the experiment results.

In conclusion, the measurements provided by the scientists are precise but not accurate.

https://brainly.com/question/10883342

#SPJ2

Answer:

The atomic radius of sodium (Na) is larger than the atomic radius of phosphorus (P). This means that the atoms of sodium are larger in size than the atoms of phosphorus.

In terms of metallic properties, sodium is a metal while phosphorus is a nonmetal. Metals typically have a shiny appearance, high thermal and electrical conductivity, and are typically malleable and ductile. Nonmetals are typically dull, poor conductors of heat and electricity, and are typically not malleable or ductile.

Sodium is a highly reactive metal and is usually found in nature as a compound rather than a pure element. It has a low melting point and boiling point, and is a good conductor of heat and electricity. Phosphorus is a nonmetal that can exist in different allotropic forms, white phosphorus is highly reactive, and red phosphorus is less reactive. It has a low melting and boiling point and is a poor conductor of heat and electricity.

In summary, the atomic radius of sodium is larger than that of phosphorus and sodium is a metal while phosphorus is a nonmetal. Sodium has properties of high reactivity, low melting point and boiling point and good conductivity of heat and electricity while Phosphorus has properties of low reactivity, low melting and boiling point and poor conductivity of heat and electricity.

Answer:

0.016 moles

Explanation: Because you are doing P4, you take the molar mass/atomic mass of phosphorous which is 30,97(rounded up) and multiply it by 4 since that's the subscript. Then you take 2.0 grams and divide it by the molar mass, which is 123.88, and that gives you 0.016 moles (rounded up)

There are 18.066 x 10^23 molecules of H2O.

1 mole of a substance is defined as the amount of that substance that contains Avogadro's number of entities, which is 6.022 x 10^23. This number is also known as Avogadro's constant.

It is important to note that Avogadro's constant is specific to the number of entities (atoms, molecules, ions, etc.) and not the mass or volume of a substance.

In the case of H2O (water), each molecule of water is made up of 2 hydrogen atoms and 1 oxygen atom. Therefore, 1 mole of H2O contains 6.022 x 10^23 molecules of H2O, each containing 2 hydrogen atoms and 1 oxygen atom.

So, when we have 3 moles of H2O, we have 3 x 6.022 x 10^23 = 18.066 x 10^23 entities of H2O. As each molecule of H2O contains 2 hydrogen atoms and 1 oxygen atom, this means that we have 18.066 x 10^23 molecules of H2O.

To learn more about Avogadro's constant:

https://brainly.com/question/1513182

#SPJ4

The minutes in which the car was fastest were 1 to 4 and the speed was 733 meters per second , and the minutes in which the car was the slowest were 4 to 5 and the speed was 100 meters per second.

The speed can be calculated using a simple formula: distance /time. Moreover, in a graph, you can know whether the car is going fast or slow depending on the slope of the line.

From minute 1 to minute 4 as the distance covered was 2200, then 2200 / 3 = 733 meters per second.

From minute 4 to minute 5 as the distance was only 100 meters, then 100/1 = 100 meters per second

Learn more about speed in https://brainly.com/question/28224010

#SPJ1

The intermolecular forces that contribute to creating a solution of [tex]KBr[/tex] in [tex]H_2O[/tex] are Ion-Dipole Intermolecular force and H-Bonding.

[tex]KBr[/tex] is an ionic compound, which contains potassium ions ([tex]K^+[/tex]) as cations and Bromide ions ([tex]Br^-[/tex]) as anions.

On the other hand,  [tex]H_2O[/tex] is a polar compound. In [tex]H_2O[/tex], as the electronegativity of oxygen is much greater than that of hydrogen, the oxygen atom attracts the electrons of the covalent bond towards itself. Therefore, hydrogen atoms get partially positive and oxygen atom gets partially negative.

Hence, when [tex]KBr[/tex] is added to water, there is an Ion-Dipole intermolecular force acting in between them.

It is also true that bromine is highly electronegative as compared to hydrogen. Thus, there will be the formation of hydrogen bonding in between [tex]KBr[/tex] and [tex]H_2O[/tex].

Hence, The intermolecular forces that contribute to creating a solution of [tex]KBr[/tex] in [tex]H_2O[/tex] are Ion-Dipole Intermolecular force and H-Bonding.

Learn more about Hydrogen bonding here: https://brainly.com/question/1426421

#SPJ4

1.0 mole of Potassium fluoride is mixed to get 0.10 L of solution is 10 M  and 17.85 mole / L is the concentration of resulting solution of NH₃

Molarity = mol solute / L solution

= 1.0 mol/0.10 L

= 10 mol/L

= 10 M.

2 .28g (grams) of NH3 is dissolved in 500 mL of water. result of concentrating solution :

Molarity, M= number of moles/ volume of solution

                             M= n/ V

Number of moles, n= mass /molar mass

Molar mass of NaOH=500L/mole

                            Mass=28g

                             n= 500/28

                               ​ = 17.85 mole/ L

3. Claude wants to make 2L of 0.5 solution of AgCl , grams needed for solution :

                   0.5 mole/ 2 liter x 180 grams/mole x 2 liter

                          = 180 g

KF is the chemical formula for the compound potassium fluoride. KF is the most widely used source of fluoride ions in chemical and manufacturing processes, surpassing hydrogen fluoride. Carobbiite, a rare mineral, is where you can naturally find potassium fluoride, an alkali halide. Potassium fluoride is a white, crystalline, salty-tasting powder. It looks like sand. utilized as an insecticide, preserver, and etchant for glass.

Learn more about potassium fluoride :

brainly.com/question/28851289

#SPJ1

The type of bond formed between two atoms having opposite charges is an ionic bond.

There are mainly two types of bonds formed between two atoms depending upon the way in which the combining atoms attain an octet structure in their valence shell.

First is, Ionic bonds. These are formed by the transfer of one or more valence shell electrons from a metal atom to the valence shell of a non-metal atom both containing opposite charges. Ionic compounds exist as ions also.

Next is Covalent bonds. These bonds are formed by the mutual sharing of electrons between the two combining atoms and they contribute an equal number of electrons for sharing. Covalent compounds only exist as molecules.

Other than these there are other types of bonding as well.

Learn more about chemical bonding here:

https://brainly.com/question/12907148

#SPJ4

To determine how many chlorine atoms are present in a 7.30 g sample of iron(II) chloride (FeCl2), you can use the molar mass of FeCl2 and the given mass of the sample.

First, you need to convert the mass of the sample from grams to moles using the molar mass of FeCl2:

mass (g) / molar mass (g/mol) = moles

7.30 g / 126.8 g/mol = 0.0578 moles

Iron(II) chloride is composed of one atom of Iron and two atoms of chlorine, so for every 1 mole of FeCl2, there are 2 moles of chlorine atoms.

To find the number of chlorine atoms in the sample, we need to multiply the number of moles of FeCl2 by the number of chlorine atoms per mole:

moles of FeCl2 x (number of chlorine atoms / 1 mole of FeCl2) = moles of chlorine atoms

0.0578 moles x 2 = 0.1156 moles

To convert moles of chlorine atoms to the number of atoms, we need to multiply by Avogadro's number which is 6.022 x 10^23 atoms/mol

0.1156 moles x 6.022 x 10^23 atoms/mol = 6.93 x 10^22 atoms of chlorine.

So 7.30 g sample of iron (II) chloride contains 6.93 x 10^22 atoms of chlorine.

Learn more about Avogadro's number here: https://brainly.com/question/24175158

#SPJ4