Which convert light energy into chemical energy during photosynthesis?

Significant figures are important because they indicate the precision of measurement. In scientific measurement, number of significant figures in a measurement is a way to communicate the precision or degree of uncertainty associated with that measurement.

The more significant figures a measurement has, the more precise the measurement is considered to be. Significant figures also help ensure that calculations and conversions are carried out with the appropriate degree of precision and avoid the appearance of false precision in the results.

When performing calculations, it is important to consider the number of significant figures in each number and to round the final result to the appropriate number of significant figures. This helps to ensure that the result is not reported with a degree of precision that is not supported by the data.

Learn more about significant figures here: brainly.com/question/24491627

#SPJ4

When the pressure is lowered to 120 mmHg, the gas's new volume is 140.33 L.

Charle's law, Boyle's law, and Gay-Lussac law are the three gas laws that make up the combined gas law, commonly referred to as a general gas equation. For a certain amount of gas, the law illustrates the relationship between temperature, volume, and pressure.

(P1xV1)/T1 = (P2xV2)/T2

where:

P1 = initial pressure = 760 mmHg

V1 = initial volume = 22.2 L

P2 = final pressure = 120 mmHg

V2 = final volume (unknown)

T1 = initial temperature (not given, but assumed constant)

T2 = final temperature (not given, but assumed constant)

We can solve for V2 by rearranging the equation as follows:

V2 = (P1xV1xT2)/(P2xT1)

T2/T1 = 1 since it is assumed that the temperature is constant, which allows us to simplify the equation to:

V2 = (P1 x V1) / P2

replacing the specified values:

V2 = (760 mmHg x 22.2 L) / 120 mmHg = 140.33 L

To know more about pressure visit:-

https://brainly.com/question/22622383

#SPJ1

Silicon. With silicon accounting for over 95% of the modules supplied today, silicon is by far the most prevalent semiconductor material used in solar cells.

Solar energy is the radiant light and heat from the Sun that is captured by a variety of technologies, including solar architecture, solar thermal energy, and solar power to produce electricity.

Simply said, solar energy is the heat and light emitted by the sun. Several methods exist for utilizing the energy that the sun provides: Using photovoltaic cells, sunlight may be converted into power. solar thermal technique, in which hot water or steam is produced using solar energy.

Learn more about Solar Energy here:

https://brainly.com/question/17711999

#SPJ1

Answer:

Mechanical energy suggests the total energy which includes the sum of kinetic energy and potential energy,

Explanation:

Mechanical energy is the sum of potential energy and kinetic energy. It is the energy associated with the motion and position of an object. For example, a moving vehicle possesses mechanical energy in the form of kinetic energy, a compressed spring possesses mechanical energy in the form of potential energy.

When a reaction is properly refluxing, vapors from the heated mixture should be Vapors should be escaping from the top of the condenser about 1/3 up the condenser height.

When a reaction is being refluxed, vapor should escape from the top of the condenser. It should be visible, rising approximately one-third of the way up the condenser. It is important to ensure that the vapor is contained within the reaction flask and that no visible vapors are formed outside of the flask.

To know more about mixture please refer:

https://brainly.com/question/24898889

#SPJ4

The chemical formula for pyroligneous acid is C₅H₄O₂.

Pyroligneous acid in chemistry is a dark liquid, produced by the destructive distillation of wood, containing acetic acid, methanol, oils and tars. It is once used as a commercial source of acetic acid.

Pyroligneous acid is also called wood vinegar or wood acid. It is termed as an aqueous liquid that is mainly obtained from wood pyrolysis.

Chemical formula is a notation indicating the number of atoms of each element present in a compound.

Learn more about pyroligneous acid at: https://brainly.com/question/29031056

#SPJ1

The molarity of the solution is 0.067 moles per liter. To calculate the molarity of the solution, you first need to determine the number of moles in the solution.

Molarity is a unit of measurement used to measure the concentration of a solution. It is defined as the amount of solute present in one liter of a solution. It is expressed as moles per liter (mol/L). In other words, molarity is the number of moles of solute in one liter of solution. This unit is commonly used in chemistry to describe the concentration of ions, molecules, or other substances dissolved in a solution. Molarity is also used to measure the strength of an acid or base, as molarity is directly proportional to the acidity or basicity of a solution. Molarity is an important concept in chemistry as it is used to calculate the amount of a given substance present in a solution.

To learn more about molarity

https://brainly.com/question/14469428

#SPJ1

Answer:

40.0

40.009 contains 5 significant figures and 3 decimals. 40.009 rounded to 4 sig figs is 40.01, to 3 sig figs is 40.0, and to 2 sig figs is 40.. To count the number of sig figs in 40.009, count all 5 digits since it has no insignificant digits (all digits are significant).

140 mL of 0.50 m solution of hcl would just neutralize 290 ml of a solution containing 4.7 g of ba(oh)2.

To solve this problem, we can use the balanced chemical equation for the reaction between hydrochloric acid (HCl) and barium hydroxide (Ba(OH)2):

2HCl + Ba(OH)2 → BaCl2 + 2H2O

From the equation, we can see that two moles of HCl are required to react with one mole of Ba(OH)2.

First, we need to calculate the number of moles of Ba(OH)2 in the given volume of solution:

molar mass of Ba(OH)2 = 137.33 g/mol

number of moles of Ba(OH)2 = mass / molar mass = 4.7 g / 137.33 g/mol = 0.0342 mol

Next, we can use the stoichiometry of the balanced equation to determine the number of moles of HCl required:

2 moles of HCl react with 1 mole of Ba(OH)2

number of moles of HCl = 2 x 0.0342 mol = 0.0684 mol

Finally, we can use the definition of molarity to calculate the volume of the 0.50 M HCl solution required to provide 0.0684 moles of HCl:

molarity = moles of solute / volume of solution

volume of solution = moles of solute / molarity = 0.0684 mol / 0.50 mol/L = 0.137 L

Since the volume of the HCl solution is expressed in liters, we need to convert to milliliters:

0.137 L x 1000 mL/L = 137 mL

Therefore, 137 mL of the 0.50 M HCl solution would be required to neutralize 290 mL of the Ba(OH)2 solution. Rounded to two significant figures, the answer is 140 mL.

Learn more about neutralize here:

https://brainly.com/question/15347368

#SPJ4

Answer: What grade is this for because anything 10 and above my brother can solve

Explanation:

The volume of the residual gas, which is oxygen, would be  15cm³.

Hydrogen and oxygen gas react to form water according to the following chemical equation:

[tex]2H_2 + O_2 -- > 2H_2O[/tex]

The ratio of hydrogen to oxygen to water formed is 2:1:1.

Considering the volume ratio, 10cm³of hydrogen gas should require cm³5cm³ of oxygen gas while 5cm³ of water would be formed.

In other words, the remaining volume of oxygen would be:

20 - 5 = 15 cm³

In summary, the volume of the residual oxygen would be 15cm³.

More on volume ratio of gases can be found here: https://brainly.com/question/332978

#SPJ1

Answer:

Because they have the same arrangement of atoms in space. Both have a straight line or a flat triangular arrangement of atoms, respectively, with bond angles of 180° and 120° respectively. In 2-dimensional drawings, it is not possible to see the differences in the three-dimensional arrangement of atoms, so both linear and trigonal planar molecules appear as a straight line or a flat triangle. However, in three dimensions, it is possible to see the differences in the arrangement of the bonds and the orientation of the molecule in space, allowing us to distinguish between linear and trigonal planar molecules.

Explanation:

Tell me if you still confuse

ALLEN

The reaction of 3.30 g of aluminum with excess of hcl produced 10.5 g of alcl3.Percent yield of AlCl3 is [tex]13.0[/tex]%

Theoretical yield is the amount of product that is expected to be produced during a chemical reaction, based on the amount of reactants used. It is calculated by using the balanced equation of the reaction and the amount of reactants used. The theoretical yield is usually expressed in moles or grams.

Theoretical yield of AlCl3

[tex]3.30 g Al * \frac{1 mol Al}{26.982 g Al }*\frac{3 mol AlCl3}{1 mol Al }\\\\= 0.608 mol AlCl3[/tex]

Theoretical yield of AlCl3

[tex]= 0.608 mol AlCl3 *\frac{133.34 g AlCl3}{1 mol AlCl3 }\\= 81.1 g AlCl3[/tex]

A chemical reaction's efficiency is gauged by its percent yield.It is calculated by dividing the actual yield of a reaction by the theoretical yield and multiplying it by 100. The theoretical yield is the amount of product that would be produced if all the reactants were completely converted to products.

Percent yield of AlCl3 =[tex]\frac{ Actual yield}{Theoretical yield}* 100%[/tex]%

                 = [tex]\frac{10.5 g AlCl3}{81.1 g AlCl3}*[/tex] 100%

                 = [tex]13.0[/tex]%

Therefore,Percent yield of AlCl3 is [tex]13.0[/tex]%

learn more Theoretical yield Refer:brainly.com/question/14966377

#SPJ4

Answer:

Below

Explanation:

PV = n R T      

Pressure   Volume   n umber of moles   Gas constant and  Kelvin temp

Answer:it is temperature and molar mass

Explanation:

M → Mt + e The reaction represents​ oxidation reaction.The loss of electron is called as oxidation.

When it was discovered that the substance loses electrons when oxidized, the meaning was expanded to include other reactions in which electrons are lost, regardless of whether oxygen is involved.

Because any loss of electrons by one substance must be followed by an increase in electrons by another, oxidation and reduction always occur concurrently.

The reaction that the equation M ⇒ Mt + e- represents it is oxidation. M has lost an electron, and is the reducing agent in this equation.

Thus, this equation represents oxidation reaction.

To learn more about the oxidation reaction, follow the link;

https://brainly.com/question/30431626

#SPJ9

The volume of the container that has a pressure of 30 atm, with 1.5 moles at 2000K is 8.2L (option B).

The volume of a gas can be calculated using the Avogadro's law equation as follows:

PV = nRT

Where;

According to this question, a container has a pressure at 30 atm, with 1.5 moles at 2000K. The volume is calculated thus;

30 × V = 1.5 × 0.0821 × 2000

30V = 246.3

V = 246.3 ÷ 30 = 8.21L

Therefore, option B is the answer.

Learn more about volume at: https://brainly.com/question/24189159

#SPJ1

The loss of product in the filtrate based on the solubility of phthalic acid is 0.189g.

Phthalic acid is a benzene dicarboxylic acid conforming of 2 carboxy groups at ortho positions. It has a part as a mortal xenobiotic metabolite. It's the conjugate acid of a phthalate( 1-) and a phthalate.

Solubility of phthalic acid at 100°C = 18g/100mL

Solubility of phthalic acid at 15°C = 0.54g/100mL

(The above data is approximate)

Loss of product is equal to the amount of the product dissolved in the solvent (water).

Amount of phthalic acid soluble in 100mL at cold temperature = 0.54g

Amount of phthalic acid soluble in 35.0mL at cold temperature

= 0.54g/1000mL x 35mL

=0.189g

The loss of product in the filtrate based on the solubility of phthalic acid is 0.189g.

Learn more about Phthalic acid:

https://brainly.com/question/13228232

#SPJ4

This is because catalysis happens on the surface.

We need something very shallow or thin and maximizing the surface area of that can give the most effective catalysis. We don't need a large depth of objects, so picking something with a high surface area and spreading the metal out really thin, maximize the possible surface area without using very much precious metal, given that precious metals are expensive and often rare.

Process of changing reaction rate using catalyst is called catalysis.

Any class of substances that have a lustrous appearance characterized by high electrical and thermal conductivity as well as by malleability is metal.

To know more about catalysis, visit:

https://brainly.com/question/1372992

#SPJ1

The density of the NH₃ sample is 0,82 gram/liter. The formula that can be used to calculate the density of a sample of NH₃ is D = [tex]\frac{M.P}{R.T}[/tex].

Density is the mass unit volume of a material substance. To find the density of NH₃ you can use the following steps:

Step 1: Convert temperature to kelvin and convert temperature to atm.

R = -9° C = (273,15  - 9 ) = 264,15 K

P = 793mmHg × 1/760 mmHg/atm = 1,043 atm

Step 2: Make a formula for calculating density with the ideal gas rules.

Ideal gas law ⇒ P × V = n × R × T

Density ⇒ D = mass ÷ V

P × V = n × R × T

P × V = [tex]\frac{mass . R . T}{M}[/tex]

P × M =  [tex]\frac{mass . R . T}{V}[/tex] ................. enter the formula to find the density

P × M = D × R × T

D × R × T = P × M

D  = [tex]\frac{M.P}{R.T}[/tex]

Step 3: Substitute the known data into the formula

D = [tex]\frac{M.P}{R.T}[/tex]

D = [tex]\frac{17,034 g/mol x 1,043 atm}{0,0821 Latm/mol.K x 264,15 K}[/tex]

D = 0,82 gram/liter

Learn more about an ideal gas equation here: https://brainly.com/question/27870704

#SPJ1

Answer: chlorofluorocarbon

Explanation:

chlorofluorocarbon

Answer:

Carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) are greenhouse gases. Chlorofluorocarbons (CFCs) are also considered greenhouse gases, but they are now largely banned due to their damaging effects on the ozone layer.

Explanation:

The formulas of the compounds that were shown are;

CaCl2

K2S

AlBr3

BeF2

MgS

Ionic compounds are a type of chemical compound made up of ions, which are atoms or molecules that have a positive or negative charge due to the gain or loss of electrons. In ionic compounds, positive ions (cations) are typically metal atoms, while negative ions (anions) are typically non-metal atoms. These ions are held together in a crystal lattice structure by strong electrostatic forces, forming a solid, crystalline substance.

Ionic compounds typically have high melting and boiling points, and they are often soluble in water. They are also typically poor conductors of electricity in the solid state, but good conductors in the melted or dissolved state due to the movement of ions.

Learn more about ionic compounds:https://brainly.com/question/29005103

#SPJ1

Quantum mechanics is the study of atoms and incredibly tiny particles that are even smaller.

In quantum mechanics, another branch of physics, atomic and subatomic particles are investigated. The primary field of science that deals with the study of atoms and molecules is chemistry. By utilizing their knowledge of atoms, chemists create molecules that resemble drugs. A distinction is established between atomic physics, which studies the atom as a system made up of a nucleus and electrons, and nuclear physics, which explores nuclear reactions and special properties of atomic nuclei. Three subatomic particles make up matter: protons, neutrons, and electrons. The only subatomic particles that have electrical charges are protons and electrons, with protons having a positive charge and electrons having a negative charge.

Learn more about quantum mechanics here:

https://brainly.com/question/11855107

#SPJ4

the element is in group 2

Ice in a 25.00-gram sample melts at 0.0 °C and subsequently heats to 20.0 °C. The energy taken in is 10.5 KJ. The heating curve in sections 2 and 3 illustrates this issue.

we know that,

melts  25.00g   335J    = 8375 J

                         -1g

warm t=mC[tex]_{p}[/tex]ΔT=25.00g×4.184 J/g°C×20.0 °C=2092 J

Add together = 10467J=10.47 KJ≅10.5 KJ

Energy is the ability to conduct work in physics. Additionally, there is heat and work, which is energy moving from one body to another. Energy is always identified in accordance with its nature once it has been transferred. Therefore, the heat transported may manifest as thermal energy while work performed may result in mechanical energy.

Motion is a property of all energies. Anybody in motion, for instance, possesses kinetic energy. Even while at rest, a tensioned object like a spring or bow has the capacity to move; this is because of the way it is built.

Learn more about energy here:

https://brainly.com/question/4543824

#SPJ4

There is a nucleus at the center of an atom and inside the nucleus, there is protons and neutrons which constantly move around.

We all know that an atom is made up of three smaller particles, also knows as the electrons, protons and neutrons.

Electrons are the negatively charged particles that spin around the positive center of the atom in circles called energy levels. Its also know that their mass is so less its nearly zero. On the other hand, protons are positively charged whereas neutrons have no charge.

We know that protons and neutrons are contained in the nucleus of the atom which move around the center of an atom.

Therefore, we know the nucleus has an overall positive charge as it contains protons.

To learn more about Atoms, click here:

brainly.com/question/29695801

#SPJ4

Here is the correct order of the transformations of energy in a power plant, from the beginning (top) to the generator (bottom):

Thermal (heat) energy is created by converting nuclear or chemical energy.

Kinetic energy is created from thermal (heat) energy.

Kinetic energy is converted to mechanical energy

Mechanical energy is converted to electrical energy

This is a generalized order and may vary depending on the specific type of power plant.

What is Power Plant?

A power plant is a facility that is designed to generate electricity from various sources of energy, such as fossil fuels (coal, oil, and natural gas), nuclear energy, hydroelectric power, wind power, solar power, and geothermal energy. The main function of a power plant is to convert the energy from its source into electrical energy that can be used to power homes, businesses, and other facilities.

The process of generating electricity in a power plant typically involves several steps, including the production of heat or mechanical energy from the source of energy, the use of turbines to convert this energy into rotational energy, and the use of generators to convert this rotational energy into electrical energy. Power plants may also include various other components, such as cooling systems, transformers, and transmission lines, to ensure the efficient and reliable distribution of electrical power to the end users.

Learn more about Power Plant from given link

https://brainly.com/question/16064039

#SPJ1

Mass spectrometry distinguishes reactants from products by comparing their molecular ion peaks based on molecular weight.

Mass spectrometry can be utilized to recognize reactants from items in a substance response by dissecting the sub-atomic particle pinnacles of the mixtures. The sub-atomic particle pinnacle of a compound addresses the mass-to-charge proportion (m/z) of the particle that is framed when the compound is ionized.

By looking at the sub-atomic particle pinnacles of the beginning materials with those of the items, one can recognize the interesting sub-atomic particle pinnacle of the beginning materials and the items, separately. This takes into account the reactants and items to be recognized and distinguished in view of their sub-atomic weight. By looking at the mass spectra of the reactants and items, one can decide the degree of the response and the character of the items framed.

Learn more about Mass spectrometry:

https://brainly.com/question/26500669

#SPJ4

Answer:

Being young, kittens can also be called “cubs” although the name “kitten” is more commonly used. Most consider cats as kittens if they are still less than one year of age. However, some vets say that a kitten can already be considered a cat when it reaches eight or nine months.

Or could also use:

Specie and stripes

1. A cat and it’s litter can’t be related without the producer which in this case is the mother

2. The stripes shows that the two are related and yeah you can have to cats that have the same stripes but that’s not likely, every-time any two cats with stripes are put together the cats show similarities but that doesn’t tell us that their related. Every cat has similar stripes but there is something that’s always gonna be off with the stripes whether the stripes have the same color or the stripes have the same arrangement on the cat. Like people cats have similar traits but that doesn’t mean there related (ex: two blue eyed people, that’s doesn’t prove that their related in any type of way).

Explanation:

Answer:

Inherited characteristics that show that a cat and kitten are related include physical traits such as fur pattern and color, eye shape, and body type. Another example is behavioral traits such as playfulness and social behavior. These traits are passed down from parent to offspring through genes and provide evidence of a familial relationship.

Explanation:

The average kinetic energy of gas particles is proportional to the absolute temperature of the gas, and all gases have the same average kinetic energy at the same temperature.

The temperature of a substance is defined as the average kinetic energy of all of its atoms or molecules. A substance's particles do not all have the same kinetic energy.
The average kinetic energy of the particles in a substance is measured by temperature. It is a typical particle's kinetic energy. Thermal equilibrium occurs when two substances have the same temperature.
The average kinetic energy of gas particles is proportional to the absolute temperature of the gas, and all gases have the same average kinetic energy at the same temperature.

To know more about Average kinetic energy go through:-

https://brainly.com/question/492249

#SPJ4