Cu is the element in the following reaction which is been reduced . Reduction refers to the acquisition of electrons.
Why does it go by the name "reduction reaction"?Reduction refers to the acquisition of electrons. Since any deficiency of electrons by one substance should be joined by an increase in electrons by something different, oxidation and decrease generally happen together. All things considered, electron-move responses are likewise called oxidation-decrease responses, or just redox responses.
4KI + 2CuCl₂ ----> 2Cul + 12 + 4 KCI .
Reduction: 2 Cu + 2e : Cu is reduced. 2 Cu
Option A is correct.
Learn more about reduction reaction:
brainly.com/question/29547754
#SPJ4
if pure no2(g) was placed in a syringe with a moveable piston, what would you expect to see as the plunger was pushed in? explain your reasoning.
If pure NO2 gas was placed in a syringe with a moveable piston, the plunger would be expected to move inwards towards the gas. This is because the gas particles in the syringe would be under pressure, due to the presence of other gas particles in the confined space.
As the plunger is pushed in, the volume of the gas particles would decrease, resulting in an increase in pressure. This increase in pressure would push the moveable piston inwards, as it tries to compensate for the reduction in volume.
The plunger of the syringe acts as a barrier between the NO2 gas and the external environment. As the plunger is pushed in, the volume of the gas particles decreases, resulting in an increase in pressure. This increase in pressure causes the moveable piston to move inwards, which is a response to the increased force exerted on it by the gas particles. Thus, the movement of the plunger is a result of the gas particles exerting pressure on the moveable piston, as the volume of the gas is reduced.
When pure NO2(g) is placed in a syringe with a movable piston and the plunger is pushed in, you can expect the gas to become compressed. This happens because the plunger reduces the volume available for the gas particles, causing them to occupy a smaller space. As a result, the pressure within the syringe will increase due to more frequent collisions between gas particles and the syringe walls. This is based on the principles of Boyle's Law, which states that the pressure and volume of a gas are inversely proportional when the temperature and the amount of gas are constant.
For more information on Boyle's Law visit:
brainly.com/question/1437490
#SPJ11
Classify each process as exothermic or endothermic.
a) gasoline burning in a car
b) isopropyl alcohol evaporating from the skin
c) water condensing as dew during the night
a) The process of gasoline burning in a car is exothermic. This is because the combustion of gasoline releases energy in the form of heat and light.
b) The process of isopropyl alcohol evaporating from the skin is endothermic. This is because the evaporation of a liquid requires energy to break the intermolecular bonds between the molecules, and this energy is absorbed from the surroundings.
c) The process of water condensing as dew during the night is exothermic. This is because when water vapor in the air comes into contact with a cooler surface, such as a blade of grass, it releases energy in the form of heat, causing the water vapor to condense into liquid water droplets.
To learn more about Exothermic click here
https://brainly.com/question/4768494
#SPJ11
Calculate the acid ionization constant for butanoic acid if a 0.155 M solution is 1.15% ionized. a. 5.1 x 10^-3. b. 1.2 x 10^-2. c. 1.8 x 10^-3.
The acid ionization constant for butanoic acid if a 0.155 M solution is 1.15% ionized is 1.8 x 10⁻³ .
What is acid ?Acid is a substance that has a pH level of less than 7 and reacts with bases to form salts. Acids are corrosive and can cause damage to skin and other organic materials. Common acids include hydrochloric acid, sulfuric acid, acetic acid, citric acid, and phosphoric acid. Acids have a sour taste and can have an unpleasant, sharp smell. Acids are used in a variety of industries, from making food products to cleaning and manufacturing materials.
[H⁺] = 0.00115 * 0.155 = 1.8 x 10⁻³ M
[A⁻] = 0.00115 * 0.155 = 1.8 x 10⁻³ M
Substituting these values into the Kₐ equation, we get:
Kₐ = [H⁺][A⁻]/[HA] = (1.8 x 10⁻³)(1.8 x 10⁻³)/0.155 = 1.8 x 10⁻³
Therefore the correct answer is C.
To learn more about acid
https://brainly.com/question/25148363
#SPJ4
How the cation's charge and size influences the lattice energy
The lattice energy of an ionic compound is inversely proportional to the size of the ions and directly proportional to the charges of the ions. As the charge of the cation increase s, the lattice energy becomes more negative (exothermic) due to increased electrostatic attraction between the ions. As the size of the cation increases, the lattice energy becomes less negative (endothermic) due to decreased electrostatic attraction between the ions.
Explanation:
Lattice energy is the energy released when an ionic solid is formed from its gaseous ions. It depends on the charges and sizes of the ions involved. The lattice energy is directly proportional to the charges of the ions because higher charges lead to stronger electrostatic attraction between the ions, resulting in a more stable ionic compound. For example, the lattice energy of MgO is greater than that of NaCl because Mg2+ has a higher charge than Na+.
On the other hand, lattice energy is inversely proportional to the size of the ions involved. Larger ions have weaker electrostatic attraction between them due to increased distance, leading to a less stable ionic compound. For example, the lattice energy of LiF is greater than that of KBr because Li+ and F- are smaller than K+ and Br-.
In summary, the lattice energy of an ionic compound is influenced by both the charge and size of the ions involved. Higher charges lead to more negative (exothermic) lattice energies, while larger sizes lead to less negative (endothermic) lattice energies.
Learn more about ions here:
https://brainly.com/question/14982375
#SPJ11
the molecular-level representation of a mixture of gases a, b and c is shown to the below. the partial pressure of gas b is 46.3 kpa. what is the mole fraction of gas b? what is the total pressure in kpa? kpa what is the partial pressure of gas c in kpa
The mole fraction of gas b is 0.33, the total pressure in kPa is 76 kPa, and the partial pressure of gas c is 17.3 kPa.
To find the mole fraction of gas b, we first need to calculate the total number of moles of all gases present in the mixture. From the diagram, we can see that the total number of moles is 2 + 3 + 4 = 9 moles. To find the mole fraction of gas b, we divide the number of moles of gas b by the total number of moles:
Mole fraction of gas b = Number of moles of gas b / Total number of moles
Mole fraction of gas b = 3 / 9
Mole fraction of gas b = 0.33 (rounded to two decimal places)
To find the total pressure in kPa, we add up the partial pressures of all gases:
Total pressure = Partial pressure of gas a + Partial pressure of gas b + Partial pressure of gas c
Total pressure = 12.4 kPa + 46.3 kPa + 17.3 kPa
Total pressure = 76 kPa
Finally, to find the partial pressure of gas c, we simply look at the diagram and see that it is 17.3 kPa.
Therefore, the mole fraction of gas b is 0.33, the total pressure in kPa is 76 kPa, and the partial pressure of gas c is 17.3 kPa.
Learn more about partial pressure here:
https://brainly.com/question/13199169
#SPJ11
Consider an aqueous solution of ammonium hypochlorite. This is a(n) ____ salt. The resulting solution is ____.
a. insoluble; acidic
b. soluble; acidic
c. insoluble; basic
d. soluble; basic
e. soluble; neutral
An aqueous solution of ammonium hypochlorite is a soluble salt. Ammonium hypochlorite is an ionic compound formed by the reaction between ammonium and hypochlorite ions.
When this salt dissolves in water, it dissociates into ammonium and hypochlorite ions, both of which are highly soluble in water. Therefore, the resulting solution is also soluble and can conduct electricity.
Ammonium hypochlorite is a weak acid salt. This means that the resulting solution will be slightly basic. The ammonium ion can undergo hydrolysis in water, producing ammonium hydroxide and hydrogen ions. The hydrogen ions combine with the hypochlorite ions to form hypochlorous acid, which is a weak acid. This reaction results in a slight increase in the pH of the solution, making it basic.
Therefore, an aqueous solution of ammonium hypochlorite is a soluble salt, and the resulting solution is slightly basic.
To know more about hypochlorite please visit...
brainly.com/question/27548463
#SPJ11
how does a catalyst affect the activation energy? how does a catalyst affect the activation energy? a catalyst provides an alternate reaction pathway with a lower activation energy. a catalyst primarily weakens the bonds in reactants. a catalyst provides energy necessary for reactants to proceed to products. a catalyst raises the activation energy of the reverse reaction.
The key assumption that accompanies the use of numbers for measuring utility is that:
The key assumption underlying the use of numbers for measuring utility.
What is the fundamental assumption underlying the use of numbers to measure utility?
The key assumption that accompanies the use of numbers for measuring utility is that utility can be quantified and compared between individuals or situations. This assumption is based on the idea that people make rational choices by weighing the costs and benefits of different options, and that these costs and benefits can be expressed numerically.
The use of numbers for measuring utility allows us to make precise comparisons between different alternatives and to identify the option that provides the greatest net benefit. However, it is important to note that this assumption is not universally accepted and some argue that utility cannot be reduced to a single numerical value.
To learn more about numerical value, visit: https://brainly.com/question/30371221
#SPJ4
draw 4-methyl-2-heptanone using the complete structural formula and line formula. remember, in complete structural formulas, all bonds and hydrogens are shown. draw structure ... complete structural formula draw structure ... line formula
Why we know CH4 undergoes hybridization
In the particle CH₄ the focal iota C has 4 valence electrons where the C particle is framing 4 sigma bonds with H molecules.
How a methane molecule can become hybrid?Methane molecules hybridize by combining one orbital with three p orbitals. There is one unpaired electron in each orbital. Carbon's s and three p orbitals overlap with hydrogen's first s orbital to form bonds. Methane is sp³ hybridized as a result.
Hybridization:The concept of hybridization states that atomic orbitals combine to form newly hybridized orbitals, which in turn have an effect on the bonding properties and geometry of molecules. The valence bond theory has also been expanded through hybridization.
The steric number of C is 4 which suggest that the hybridization of the atom is sp³ where the math and the shape is tetrahedral.
So, in the particle CH₄ the focal iota C has 4 valence electrons where the C particle is framing 4 sigma bonds with H molecules.
Learn more about hybridization :
brainly.com/question/28468454
#SPJ4
amount of heat consumed in a reaction is ---- to the amount of hear lost by solution
Law of Conservation of Energy: Amount of Heat Consumed in a Reaction is Equal to Amount of Heat Lost by Solution.
What is the relationship between the amount of heat consumed in a chemical reaction and the amount of heat lost by the solution?
The total amount of energy in a closed system remains constant, according to the rule of conservation of energy. In the case of a chemical reaction, this means that the total energy of the reactants must be equal to the total energy of the products. Heat is a form of energy, and it can either be consumed or lost during a chemical reaction.
Therefore, the amount of heat consumed by a reaction must be equal to the amount of heat lost by the solution, as long as the system is closed and no external energy is added or removed. This principle is known as the first law of thermodynamics and is essential for understanding energy transformations in chemical reactions.
To learn more about Law of Conservation of Energy, visit: https://brainly.com/question/24772394
#SPJ4
which of the following human activities is most closely associated with depletion of the stratospheric ozone layer?
The human activity that is most closely associated with depletion of the stratospheric ozone layer is the disposal of refrigerators and air conditioners, which contain chlorofluorocarbons (CFCs) and other ozone-depleting substances. Option (b)
When these substances are released into the atmosphere, they react with ozone molecules in the stratosphere, breaking them down and causing a depletion of the ozone layer. The use of CFCs in aerosols and solvents has also been a significant contributor to the depletion of the ozone layer.
While other human activities such as mining, heating of homes and factories, generation of electricity, and agricultural irrigation can have negative environmental impacts, they are not as closely associated with ozone depletion as the release of ozone-depleting substances from refrigerators, air conditioners, and aerosols.
To learn about human activity:
https://brainly.com/question/12317249
#SPJ4
Full Question: Which of the following human activities is most closely associated with depletion of the stratospheric ozone layer?
A: Mining of coal
B: Disposal of refrigerators and air conditioners
C: Heating of homes and factories
D: Generation of electricity
E: Agricultural irrigation
will the solubility of z2so4 increase, decrease, or remain the same if it is dissolved in 100.0 ml of 0.10 m na2so4 instead of distilled water? explain.
The solubility of Z2SO4 will decrease if it is dissolved in 100.0 mL of 0.10 M Na2SO4 instead of distilled water. This is because Na2SO4 and Z2SO4 both contain the sulfate ion (SO4²⁻), which results in a common ion effect. The presence of a common ion in the solution suppresses the solubility of Z2SO4, causing it to be less soluble than in distilled water.
The addition of Na2SO4 to the solvent affects the solubility of z2so4 in two ways: by the common ion effect and by the ionic strength effect. The common ion effect occurs when the solvent already contains an ion that is also present in the solute. In this case, Na+ is the common ion between Na2SO4 and z2so4. As the concentration of Na+ in the solvent increases due to the addition of Na2SO4, the solubility of z2so4 decreases because the common ion reduces the amount of z2so4 that can dissolve in the solvent.
The ionic strength effect occurs when the total concentration of ions in the solvent increases due to the addition of a solute. As the concentration of ions increases, the electrostatic interactions between the ions become stronger, which reduces the solubility of z2so4. Therefore, the solubility of z2so4 will decrease when it is dissolved in 100.0 mL of 0.10 M Na2SO4 compared to when it is dissolved in distilled water.
To know more about solubility visit:-
https://brainly.com/question/28170449
#SPJ11
classify each of these compounds as an arrhenius acid, an arrhenius base, or neither. drag each item to the appropriate bin. view available hint(s)for part a resethelp arhenius aciddroppable arhenius basedroppable neitherdroppable
In order to classify a compound as an Arrhenius acid or base, we need to consider its behavior in aqueous solutions. An Arrhenius acid is a compound that donates a hydrogen ion (H+) in water, while an Arrhenius base is a compound that donates a hydroxide ion (OH-) in water.
If a compound does not exhibit these behaviors in water, it is classified as "neither" an Arrhenius acid nor base.
For example:
- Hydrochloric acid (HCl) donates H+ ions in water, making it an Arrhenius acid.
- Sodium hydroxide (NaOH) donates OH- ions in water, making it an Arrhenius base.
- Carbon dioxide (CO2) does not donate H+ or OH- ions in water, so it is neither an Arrhenius acid nor base.
To know more Arrhenius base visit:
https://brainly.com/question/9936252
#SPJ11
2. What is the classification of an enzyme?
carbohydrates c. nucleic acids e. peptidoglycans b. proteins d. lipids
The classification of an enzyme is given by the term called as peptidoglycans which is option E.
A distinguishing characteristic of the bacterial cell wall is peptididoglycan. Peptidoglycan has gained a lot of attention due to its biology, the potential for the identification of new antibiotic targets, and its function in infection. It was first discovered as a target of the ground-breaking beta-lactam antibiotics. A substantial polymer called peptididoglycan creates a mesh-like framework surrounding the bacterial cytoplasmic membrane. In the bacterial cell cycle, peptididoglycan production is essential for the growth of the scaffold during cell elongation and the creation of a septum during cell division.
The production of monomeric precursors in the cytoplasm, their transportation to the periplasm, and their polymerization to create a functioning peptidoglycan sacculus are all parts of this intricate multifactorial process. In order to successfully assemble a strong sacculus that will shield the cell against turgor and dictate cell shape, these processes need spatiotemporal control. The basic principles of peptidoglycan biology have been revealed over a century of research, and more recent investigations using cutting-edge technology have revealed fresh information about the molecular interactions that control peptidoglycan production.
Learn more about Peptidoglycans:
https://brainly.com/question/15300606
#SPJ4
Complete question:
What is the classification of an enzyme?
a. carbohydrates
b. proteins
c. nucleic acids
d. lipids
e. peptidoglycans
how do we calculate percent ionization in water?
The percent ionization of a weak acid, HA, is defined as the ratio of the equilibrium H₃O⁺ concentration to the initial HA concentration, multiplied by 100%.
It is a degree of the power of an acid is its percentage ionization. The percentage ionization of a susceptible acid is the ratio of the awareness of the ionized acid to the preliminary acid awareness, instances 100. Strong acids (bases) ionize absolutely so their percentage ionization is 100%. The percentage ionization for a susceptible acid (base) desires to be calculated. It may be extra intuitive whilst considering way to consider the percentage ionized as opposed to the concentrations or the equilibrium constant.
To learn more about percentage ionization check the link below-
https://brainly.com/question/14919550
#SPJ4
Which term describes gases as small, energetic particles moving around and bouncing into each other?.
The term that describes gases as small, energetic particles moving around and bouncing into each other is "kinetic theory of gases."
According to this theory, gases are composed of tiny particles, such as molecules or atoms, that are in constant random motion. These particles move around rapidly, colliding with each other and with the walls of their container. The kinetic energy of these particles gives gases their unique properties, such as their ability to expand to fill their container and their low density compared to liquids and solids.
In summary, the kinetic theory of gases helps to explain the behavior and properties of gases as a result of the motion and collisions of their individual particles.
To know more about kinetic theory visit:-
https://brainly.com/question/14454576
#SPJ11
Enthalpy change of atomization is always endothermic/exothermic
Enthalpy change of atomization is always endothermic, as it requires energy to break chemical bonds and separate atoms into individual gaseous atoms.
When a substance is atomized, its chemical bonds are broken and its constituent atoms are separated into individual gaseous atoms. This process requires energy, as the bonds between the atoms must be broken. Therefore, the enthalpy change of atomization is always endothermic, meaning it absorbs heat from the surroundings. The magnitude of the enthalpy change of atomization depends on the strength of the chemical bonds within the substance, as stronger bonds require more energy to break. This property is important in understanding the reactivity and stability of substances, as well as in the design and optimization of chemical reactions.
learn more about enthalpy change here:
https://brainly.com/question/29556033
#SPJ11
explain how h-bonding of water results in the molecule's capacity to be an effective cooling agent. explain in three sentences using terminology used in lecture
The H-bonding of water results in the molecule's capacity to be an effective cooling agent weak associations between the partially positive and partially negative ends of the molecules.
A coolant is a material that is normally liquid and is used to lower or regulate a system's temperature. High thermal capacity, low viscosity, low cost, non-toxic, chemically inert, and neither causes nor encourages cooling system corrosion are characteristics of the perfect coolant. The coolant must also be an electrical insulator for some applications.
In industrial processing, heat-transfer fluid is a technical word that is more frequently used in high temperature as well as low temperature manufacturing applications, despite the fact that the phrase "coolant" is regularly used in automotive and HVAC applications. Cutting fluids are also included by the phrase. Water-soluble coolant and plain cutting fluid are two general categories for industrial cutting fluid. Oil in water emulsion serves as a water-soluble coolant. Its oil content ranges from zero to variable amounts (synthetic coolant).
This coolant has two options: it may either maintain its phase, remaining liquid or gaseous, or it can go through a phase change, increasing the cooling efficiency. The second is more often referred to as refrigerant when it is utilised to attain temperatures below ambient.
Learn more about Cooling agent:
https://brainly.com/question/29629075
#SPJ4
At what pressure would a sample of gas occupy 8.06 L if it occupies 3.84 L at 4.06 atm? (Assume constant temperature.)
The pressure of the sample of the gas occupy the 8.06 L if it occupies the 3.84 L at 4.06 atm is 1.93 atm.
The relation between the pressure and the volume is as :
P₁ V₁ = P₂ V₂
Where,
The initial pressure of the gas, P₁ = ?
The final pressure of the gas, P₂ = 4.06 atm
The initial volume of the gas, V₁ = 8.06 L
The final volume of the gas, V₂ = 3.84 L
P₁ = ( P₂ V₂ ) / V₁
P₁ = ( 4.06 × 3.84 ) / 8.06
P₁ = 1.93 atm
The initial pressure of the gas is the 1.93 atm with the initial volume of the gas 8.06 L. The final pressure is 4.06 atm.
To learn more about pressure here
https://brainly.com/question/31295049
#SPJ1
Where did the spread of opera start and where did it go?
With the production of Jacopo Peri's mostly forgotten Dafne in Florence in 1598, opera began in Italy at the end of the 16th century.
Particularly from Claudio Monteverdi's L'Orfeo and quickly spread throughout Europe: Jean-Baptiste Lully in France, Henry Purcell in England, and Heinrich Schütz in Germany
Where was opera popularized?The first nation where opera gained popularity was Italy. Claudio Monteverdi and Jacopo Peri called it home. This exciting form of entertainment eventually spread throughout the remainder of Europe. Italy, France, and Germany are the primary producers of opera.
Learn more about Producer:
brainly.com/question/29391287
#SPJ4
temperature rise of a furnace is the temperature difference between the air entering the furnace and leaving the furnace. (true/false)
The statement "Temperature rise of a furnace is the temperature difference between the air entering the furnace and leaving the furnace" is true.
The temperature rise of a furnace is defined as the difference in temperature between the air entering the furnace and the air leaving the furnace. This temperature rise is a key parameter in determining the performance of a furnace. It reflects the amount of heat that is being transferred from the furnace to the air passing through it.
In HVAC (heating, ventilation, and air conditioning) systems, the temperature rise is used to measure the efficiency of a furnace. A higher temperature rise indicates that more heat is being transferred to the air, which means that the furnace is operating more efficiently.
Thus, the temperature rise is an important parameter in designing, operating, and maintaining furnaces and HVAC systems, and it is essential for ensuring optimal performance and energy efficiency.
To know more about the HVAC systems refer here :
https://brainly.com/question/28235245#
#SPJ11
if 6 m nh3 is added to the beaker containing the cu2 (question 6), almost all the cu2 in solution is converted to cu(nh3)42 . the cell potential, ecell, goes to 0.92 v with the cu electrode as the anode. (e0cell, is 0.45 v.) the nernst equation, available in your che202 text, is used when dealing with concentration effects. if 2 moles of electrons transfer, calculate the reaction quotient, qc. use scientific notation here.
According to the question the reaction quotient (Qc) is 0.099 in scientific notation.
What is reaction quotient?The reaction quotient, often referred to as Q, is a mathematical expression used to calculate the equilibrium concentrations of reactants and products in a chemical reaction. It is obtained by substituting the actual concentrations of reactants and products into the equilibrium expression for the reaction. The reaction quotient can be used to determine the direction in which the reaction will proceed in order to reach equilibrium. If the reaction quotient is greater than the equilibrium constant (K), the reaction will proceed in the forward direction, and if the reaction quotient is less than the equilibrium constant, the reaction will proceed in the reverse direction.
Qc = exp[(E0 - E) (nF/RT)]
= exp[(0.45 - 0.92) (2 x 96,485/8.314 x 298)]
= exp(-2.3475)
= 0.099
Therefore, the reaction quotient (Qc) is 0.099 in scientific notation.
To learn more about reaction quotient
https://brainly.com/question/12693045
#SPJ4
what volume of a solution is needed to dissolve 1.0 mol of koh to make a solution whose ph is 13.55?
The volume of the solution is needed to be dissolve the 1.0 mol of the KOH to make the solution whose pH is the 13.55 is 2.8 L.
The pOH is expressed as :
pH + pOH = 14
pH = 13.55
13.55 + pOH = 14
pOH = 14 - 13.55
pOH = 0.45
The concentration of the OH⁻ is as :
pOH = - log [OH⁻]
pOH = 0.45
0.45 = - Log [OH⁻]
- 0.45 = Log [OH⁻]
[OH⁻] = 0.355 M
The molarity is as :
Molarity = mole /Volume
Where,
The molarity of the solution is 0.335 M
The moles of the solution is 1 mol
Volume = mole /Molarity
Volume = 1 / 0.355 M
Volume = 2.8 L
The volume of the KOH solution is 2.8 L.
To learn more about pH here
https://brainly.com/question/17751948
#SPJ4
calculate the ph at which mg(oh)2 begins to precipitate from a solution containing 0.10 m mg2 ions, given the ksp
The solubility product constant (Ksp) for Mg(OH)₂ is 5.61 x 10⁻¹². This means that the product of the molar concentrations of the ions that make up the compound must be equal to.
What is solubility?Solubility is a physical property of a substance, which determines its ability to dissolve and form a solution with another substance. It is the maximum concentration of a solute in a solution at a given temperature, pressure and solvent.
In this case, the molar concentration of Mg²⁺ ions is 0.10 M, so the product of the molar concentrations should be equal to or less than 0.10 x 5.61 x 10⁻¹² = 5.61 x 10⁻¹³.
The molar concentration of OH⁻ ions can be calculated by taking the square root of the Ksp value and dividing by the molar concentration of Mg²⁺ ions: √(5.61 x 10⁻¹²) / 0.10 = 5.11 x 10⁻⁷
Therefore, the pH at which Mg(OH)₂ begins to precipitate from a solution containing 0.10 M Mg²⁺ ions is the negative log of the molar concentration of OH⁻ ions, or -log(5.11 x 10⁻⁷), which is 6.30.
To learn more about solubility
https://brainly.com/question/23946616
#SPJ4
Amount of benzil used in grams (g) 0. 147 Amount of sodium borohydride used in grams (g) 0. 021
Product obtained in grams 0. 144 Product melting point (°C) 132-134 Melting point for benzoin mixture (°C) 135-137 Melting point for meso-hydrobenzoin mixture (°C) 127-132 Calculations and Analysis - Amount of reactant in moles ____
- Amount of sodium borohydride in moles. ____ - Product obtained in moles _____ - Product theoretical yield ____
- Product percent yield ____
Amount of reactant in moles is 0.000693 mol.
Amount of sodium borohydride in moles is 0.000556 mol.
Product obtained in moles is 0.000693 mol.
Product theoretical yield is 0.000693 mol.
Product percent yield is 59.1%.
We can use the given masses of benzil and sodium borohydride to calculate the amount of each reactant in moles. Then, we can use the stoichiometry of the reaction to determine the theoretical yield of the product in moles.
Finally, we can calculate the percent yield of the product using the actual yield (given as 0.144 g) and the theoretical yield.
The balanced chemical equation for the reaction is:
[tex]C_14H_{10}O_2 + 4 H_3BCN - C_14H_12O_2 + 4 B(OH)^3 + 2 H_2[/tex]
From the molecular formula of benzil [tex](C_{14}H_{10}O_2)[/tex], we can calculate its molar mass:
Molar mass of benzil = 2(12.01 g/mol) + 10(1.01 g/mol) + 2(16.00 g/mol)
= 212.24 g/mol
Amount of benzil in moles = 0.147 g / 212.24 g/mol
= 0.000693 mol
From the molecular formula of sodium borohydride [tex](NaBH_4)[/tex], we can calculate its molar mass:
Molar mass of [tex]NaBH_4[/tex] = 22.99 g/mol + 4(1.01 g/mol) + 4(1.01 g/mol)
= 37.83 g/mol
Amount of sodium borohydride in moles = 0.021 g / 37.83 g/mol
= 0.000556 mol
According to the balanced chemical equation, the reaction produces one mole of product (benzoin) for every one mole of benzil reacted. Therefore, the theoretical yield of benzoin in moles is equal to the amount of benzil used in moles:
Product obtained in moles = 0.000693 mol
Product theoretical yield = 0.000693 mol
Product percent yield = (actual yield / theoretical yield) x 100%
Product percent yield = (0.144 g / (0.000693 mol x 212.24 g/mol)) x 100%
≈ 59.1%
The melting point of the product (132-134°C) falls within the expected range for benzoin, so the product is likely pure.
Learn more about Sodium borohydride at
brainly.com/question/31321350
#SPJ4
which of the following is not a conjugate acid-base pair? question 2 options: 1) all of these are conjugate acid-base pairs. 2) h3o/oh 3) h2so3/hso3 4) c2h3o2/hc2h3o2 5) nh4 /nh3
In this case, H3O+ is not an acid that donates a proton to OH- to form a pair, and OH- is not a base that accepts a proton from H3O+ to form a pair.
All of these are conjugate acid-base pairs. All the pairs listed in options 2), 3), 4), and 5) are conjugate acid-base pairs because they differ only in the presence or absence of a proton (H+). The H3O+/OH- pair is the conjugate acid-base pair that represents the autoionization of water.
To determine which of the following is not a conjugate acid-base pair, a conjugate acid-base pair is. A conjugate acid-base pair consists of two substances related to each other by the transfer of a proton (H+). The acid donates a proton, while the base accepts it.
Here are the given options:
1) All of these are conjugate acid-base pairs.
2) H3O+/OH-
3) H2SO3/HSO3-
4) C2H3O2-/HC2H3O2
5) NH4+/NH3
Option 2 (H3O+/OH-) is not a conjugate acid-base pair. In a conjugate acid-base pair, the acid must differ from the base by one proton. In this case, H3O+ is not an acid that donates a proton to OH- to form a pair, and OH- is not a base that accepts a proton from H3O+ to form a pair.
Learn more about acid-base pairs
brainly.com/question/13409907
#SPJ11
39. A Grignard reaction of n-butylmagnesium bromide with acetone would produce:
a. 3-methyl-2-hexanol b. 2-methyl-3-hexanol c. 2-hexyl-2-methanol d. 2-methyl-2-hexanol
e. 1,1-dimethyl-1-pentanol
The correct answer is d. 2-methyl-2-hexanol.
What is grignard reaction?The Grignard Reaction occurs when an organomagnesium halide (Grignard reagent) is added to a ketone or aldehyde to generate a tertiary or secondary alcohol. A primary alcohol is formed as a result of the reaction with formaldehyde.
The Grignard reaction of n-butylmagnesium bromide with acetone would produce 2-methyl-2-hexanol.
The reaction mechanism involves the formation of a carbon-carbon bond between the carbonyl carbon of acetone and the alkyl magnesium bromide to form a tertiary alcohol. The Grignard reagent adds to the carbonyl group of acetone, followed by protonation of the alkoxide intermediate to yield the alcohol.
The reaction can be represented as follows:
CH₃COCH₃ + CH₃(CH₂)₃MgBr → CH₃(CH₂)₃CH(OH)CH(CH₃)₂ + MgBrOAc
The product formed has a branched chain with a methyl group on the second carbon atom and a butyl group on the fourth carbon atom, which corresponds to 2-methyl-2-hexanol. Therefore, the correct answer is d. 2-methyl-2-hexanol.
Learn more about grignard reaction on:
https://brainly.com/question/30624804
#SPJ4
How much should the distillation flask be filled?
The distillation flask should be filled no more than two-thirds full to prevent boiling liquid from splattering and potentially causing injury.
This also ensures that there is enough room for vapor to form and travel up the distillation column. A distillation flask, also known as a boiling flask, is a type of laboratory glassware used for separating and purifying mixtures of liquids by heating and vaporizing the components with different boiling points. It is typically made of heat-resistant borosilicate glass and has a round bottom to allow for efficient heating and mixing of the liquid.
The flask is usually attached to a condenser and a receiver flask to collect the purified liquid. The volume of the distillation flask can vary depending on the amount of liquid being distilled, but it should not be filled more than two-thirds full to prevent splattering and ensure efficient vapor formation.
To know more about distillation flask, please click on:
https://brainly.com/question/15187318
#SPJ11
A student titrates 10.0 mL samples of 1.0M Solutions of each of the haloacetic acids with a standard solution of NaOH. Which of the following statements correctly predicts the volume of NaOH(aq) needed to reach the equivalence point? (A) Fluoroacetic acid will need the smallest volume of NaOH(aq) to reach the equivalence point. (B) Iodoacetic acid will need the smallest volume of NaOH(aq) to reach the equivalence point. (C) All of the acids will need the same volume of NaOH(aq) to reach the equivalence point. (D) All of the haloacetic acids are weak; therefore none will reach an equivalence point.
In a student's titration, the correct prediction of NaOH(aq) volume is (B) Iodoacetic acid will need the smallest volume of NaOH(aq) to reach the equivalence point.
Why is Iodoacetic acid needed?Iodoacetic acid is needed because iodoacetic acid is a stronger acid than fluoroacetic and chloroacetic acids due to the presence of the larger iodine atom, which stabilizes the negative charge on the carboxylate ion formed during the titration.
Therefore, iodoacetic acid will require less NaOH(aq) to neutralize all of the acid present, reaching the equivalence point faster than the other haloacetic acids.
Find out more on acids here: https://brainly.com/question/25148363
#SPJ1
Answer:
All of the acids will need the same volume of NaOH(aq) to reach the equivalence point.
Explanation:
The equivalence point of a weak acid-strong base titration is reached when only the conjugate base of the weak acid remains. Since all the weak acids use the same reaction equation, they would all use the same amount of NaOH to react with all the present weak acids.
